linux/include/acpi/platform/acenv.h
Bob Moore b229cf92ee ACPI: ACPICA 20060421
Removed a device initialization optimization introduced in
20051216 where the _STA method was not run unless an _INI
was also present for the same device. This optimization
could cause problems because it could allow _INI methods
to be run within a not-present device subtree (If a
not-present device had no _INI, _STA would not be run,
the not-present status would not be discovered, and the
children of the device would be incorrectly traversed.)

Implemented a new _STA optimization where namespace
subtrees that do not contain _INI are identified and
ignored during device initialization. Selectively running
_STA can significantly improve boot time on large machines
(with assistance from Len Brown.)

Implemented support for the device initialization case
where the returned _STA flags indicate a device not-present
but functioning. In this case, _INI is not run, but the
device children are examined for presence, as per the
ACPI specification.

Implemented an additional change to the IndexField support
in order to conform to MS behavior. The value written to
the Index Register is not simply a byte offset, it is a
byte offset in units of the access width of the parent
Index Field. (Fiodor Suietov)

Defined and deployed a new OSL interface,
acpi_os_validate_address().  This interface is called during
the creation of all AML operation regions, and allows
the host OS to exert control over what addresses it will
allow the AML code to access. Operation Regions whose
addresses are disallowed will cause a runtime exception
when they are actually accessed (will not affect or abort
table loading.)

Defined and deployed a new OSL interface,
acpi_os_validate_interface().  This interface allows the host OS
to match the various "optional" interface/behavior strings
for the _OSI predefined control method as appropriate
(with assistance from Bjorn Helgaas.)

Restructured and corrected various problems in the
exception handling code paths within DsCallControlMethod
and DsTerminateControlMethod in dsmethod (with assistance
from Takayoshi Kochi.)

Modified the Linux source converter to ignore quoted string
literals while converting identifiers from mixed to lower
case. This will correct problems with the disassembler
and other areas where such strings must not be modified.

The ACPI_FUNCTION_* macros no longer require quotes around
the function name. This allows the Linux source converter
to convert the names, now that the converter ignores
quoted strings.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-14 02:30:55 -04:00

363 lines
11 KiB
C

/******************************************************************************
*
* Name: acenv.h - Generation environment specific items
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#ifndef __ACENV_H__
#define __ACENV_H__
/*
* Configuration for ACPI tools and utilities
*/
#ifdef ACPI_LIBRARY
/*
* Note: The non-debug version of the acpi_library does not contain any
* debug support, for minimimal size. The debug version uses ACPI_FULL_DEBUG
*/
#define ACPI_USE_LOCAL_CACHE
#endif
#ifdef ACPI_ASL_COMPILER
#define ACPI_DEBUG_OUTPUT
#define ACPI_APPLICATION
#define ACPI_DISASSEMBLER
#define ACPI_CONSTANT_EVAL_ONLY
#define ACPI_LARGE_NAMESPACE_NODE
#define ACPI_DATA_TABLE_DISASSEMBLY
#endif
#ifdef ACPI_EXEC_APP
#undef DEBUGGER_THREADING
#define DEBUGGER_THREADING DEBUGGER_SINGLE_THREADED
#define ACPI_FULL_DEBUG
#define ACPI_APPLICATION
#define ACPI_DEBUGGER
#define ACPI_MUTEX_DEBUG
#define ACPI_DBG_TRACK_ALLOCATIONS
#endif
#ifdef ACPI_DASM_APP
#ifndef MSDOS
#define ACPI_DEBUG_OUTPUT
#endif
#define ACPI_APPLICATION
#define ACPI_DISASSEMBLER
#define ACPI_NO_METHOD_EXECUTION
#define ACPI_LARGE_NAMESPACE_NODE
#define ACPI_DATA_TABLE_DISASSEMBLY
#endif
#ifdef ACPI_APPLICATION
#define ACPI_USE_SYSTEM_CLIBRARY
#define ACPI_USE_LOCAL_CACHE
#endif
#ifdef ACPI_FULL_DEBUG
#define ACPI_DEBUGGER
#define ACPI_DEBUG_OUTPUT
#define ACPI_DISASSEMBLER
#endif
/*
* Environment configuration. The purpose of this file is to interface to the
* local generation environment.
*
* 1) ACPI_USE_SYSTEM_CLIBRARY - Define this if linking to an actual C library.
* Otherwise, local versions of string/memory functions will be used.
* 2) ACPI_USE_STANDARD_HEADERS - Define this if linking to a C library and
* the standard header files may be used.
*
* The ACPI subsystem only uses low level C library functions that do not call
* operating system services and may therefore be inlined in the code.
*
* It may be necessary to tailor these include files to the target
* generation environment.
*
*
* Functions and constants used from each header:
*
* string.h: memcpy
* memset
* strcat
* strcmp
* strcpy
* strlen
* strncmp
* strncat
* strncpy
*
* stdlib.h: strtoul
*
* stdarg.h: va_list
* va_arg
* va_start
* va_end
*
*/
/*! [Begin] no source code translation */
#if defined(__linux__)
#include "aclinux.h"
#elif defined(_AED_EFI)
#include "acefi.h"
#elif defined(WIN32)
#include "acwin.h"
#elif defined(WIN64)
#include "acwin64.h"
#elif defined(MSDOS) /* Must appear after WIN32 and WIN64 check */
#include "acdos16.h"
#elif defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
#include "acfreebsd.h"
#elif defined(__NetBSD__)
#include "acnetbsd.h"
#elif defined(MODESTO)
#include "acmodesto.h"
#elif defined(NETWARE)
#include "acnetware.h"
#elif defined(__sun)
#include "acsolaris.h"
#else
/* All other environments */
#define ACPI_USE_STANDARD_HEADERS
#define COMPILER_DEPENDENT_INT64 long long
#define COMPILER_DEPENDENT_UINT64 unsigned long long
#endif
/*! [End] no source code translation !*/
/*
* Debugger threading model
* Use single threaded if the entire subsystem is contained in an application
* Use multiple threaded when the subsystem is running in the kernel.
*
* By default the model is single threaded if ACPI_APPLICATION is set,
* multi-threaded if ACPI_APPLICATION is not set.
*/
#define DEBUGGER_SINGLE_THREADED 0
#define DEBUGGER_MULTI_THREADED 1
#ifndef DEBUGGER_THREADING
#ifdef ACPI_APPLICATION
#define DEBUGGER_THREADING DEBUGGER_SINGLE_THREADED
#else
#define DEBUGGER_THREADING DEBUGGER_MULTI_THREADED
#endif
#endif /* !DEBUGGER_THREADING */
/******************************************************************************
*
* C library configuration
*
*****************************************************************************/
#define ACPI_IS_ASCII(c) ((c) < 0x80)
#ifdef ACPI_USE_SYSTEM_CLIBRARY
/*
* Use the standard C library headers.
* We want to keep these to a minimum.
*/
#ifdef ACPI_USE_STANDARD_HEADERS
/*
* Use the standard headers from the standard locations
*/
#include <stdarg.h>
#include <stdlib.h>
#include <string.h>
#include <ctype.h>
#endif /* ACPI_USE_STANDARD_HEADERS */
/*
* We will be linking to the standard Clib functions
*/
#define ACPI_STRSTR(s1,s2) strstr((s1), (s2))
#define ACPI_STRCHR(s1,c) strchr((s1), (c))
#define ACPI_STRLEN(s) (acpi_size) strlen((s))
#define ACPI_STRCPY(d,s) (void) strcpy((d), (s))
#define ACPI_STRNCPY(d,s,n) (void) strncpy((d), (s), (acpi_size)(n))
#define ACPI_STRNCMP(d,s,n) strncmp((d), (s), (acpi_size)(n))
#define ACPI_STRCMP(d,s) strcmp((d), (s))
#define ACPI_STRCAT(d,s) (void) strcat((d), (s))
#define ACPI_STRNCAT(d,s,n) strncat((d), (s), (acpi_size)(n))
#define ACPI_STRTOUL(d,s,n) strtoul((d), (s), (acpi_size)(n))
#define ACPI_MEMCMP(s1,s2,n) memcmp((const char *)(s1), (const char *)(s2), (acpi_size)(n))
#define ACPI_MEMCPY(d,s,n) (void) memcpy((d), (s), (acpi_size)(n))
#define ACPI_MEMSET(d,s,n) (void) memset((d), (s), (acpi_size)(n))
#define ACPI_TOUPPER(i) toupper((int) (i))
#define ACPI_TOLOWER(i) tolower((int) (i))
#define ACPI_IS_XDIGIT(i) isxdigit((int) (i))
#define ACPI_IS_DIGIT(i) isdigit((int) (i))
#define ACPI_IS_SPACE(i) isspace((int) (i))
#define ACPI_IS_UPPER(i) isupper((int) (i))
#define ACPI_IS_PRINT(i) isprint((int) (i))
#define ACPI_IS_ALPHA(i) isalpha((int) (i))
#else
/******************************************************************************
*
* Not using native C library, use local implementations
*
*****************************************************************************/
/*
* Use local definitions of C library macros and functions
* NOTE: The function implementations may not be as efficient
* as an inline or assembly code implementation provided by a
* native C library.
*/
#ifndef va_arg
#ifndef _VALIST
#define _VALIST
typedef char *va_list;
#endif /* _VALIST */
/*
* Storage alignment properties
*/
#define _AUPBND (sizeof (acpi_native_int) - 1)
#define _ADNBND (sizeof (acpi_native_int) - 1)
/*
* Variable argument list macro definitions
*/
#define _bnd(X, bnd) (((sizeof (X)) + (bnd)) & (~(bnd)))
#define va_arg(ap, T) (*(T *)(((ap) += (_bnd (T, _AUPBND))) - (_bnd (T,_ADNBND))))
#define va_end(ap) (void) 0
#define va_start(ap, A) (void) ((ap) = (((char *) &(A)) + (_bnd (A,_AUPBND))))
#endif /* va_arg */
#define ACPI_STRSTR(s1,s2) acpi_ut_strstr ((s1), (s2))
#define ACPI_STRCHR(s1,c) acpi_ut_strchr ((s1), (c))
#define ACPI_STRLEN(s) (acpi_size) acpi_ut_strlen ((s))
#define ACPI_STRCPY(d,s) (void) acpi_ut_strcpy ((d), (s))
#define ACPI_STRNCPY(d,s,n) (void) acpi_ut_strncpy ((d), (s), (acpi_size)(n))
#define ACPI_STRNCMP(d,s,n) acpi_ut_strncmp ((d), (s), (acpi_size)(n))
#define ACPI_STRCMP(d,s) acpi_ut_strcmp ((d), (s))
#define ACPI_STRCAT(d,s) (void) acpi_ut_strcat ((d), (s))
#define ACPI_STRNCAT(d,s,n) acpi_ut_strncat ((d), (s), (acpi_size)(n))
#define ACPI_STRTOUL(d,s,n) acpi_ut_strtoul ((d), (s), (acpi_size)(n))
#define ACPI_MEMCMP(s1,s2,n) acpi_ut_memcmp((const char *)(s1), (const char *)(s2), (acpi_size)(n))
#define ACPI_MEMCPY(d,s,n) (void) acpi_ut_memcpy ((d), (s), (acpi_size)(n))
#define ACPI_MEMSET(d,v,n) (void) acpi_ut_memset ((d), (v), (acpi_size)(n))
#define ACPI_TOUPPER acpi_ut_to_upper
#define ACPI_TOLOWER acpi_ut_to_lower
#endif /* ACPI_USE_SYSTEM_CLIBRARY */
/******************************************************************************
*
* Assembly code macros
*
*****************************************************************************/
/*
* Handle platform- and compiler-specific assembly language differences.
* These should already have been defined by the platform includes above.
*
* Notes:
* 1) Interrupt 3 is used to break into a debugger
* 2) Interrupts are turned off during ACPI register setup
*/
/* Unrecognized compiler, use defaults */
#ifndef ACPI_ASM_MACROS
/*
* Calling conventions:
*
* ACPI_SYSTEM_XFACE - Interfaces to host OS (handlers, threads)
* ACPI_EXTERNAL_XFACE - External ACPI interfaces
* ACPI_INTERNAL_XFACE - Internal ACPI interfaces
* ACPI_INTERNAL_VAR_XFACE - Internal variable-parameter list interfaces
*/
#define ACPI_SYSTEM_XFACE
#define ACPI_EXTERNAL_XFACE
#define ACPI_INTERNAL_XFACE
#define ACPI_INTERNAL_VAR_XFACE
#define ACPI_ASM_MACROS
#define BREAKPOINT3
#define ACPI_DISABLE_IRQS()
#define ACPI_ENABLE_IRQS()
#define ACPI_ACQUIRE_GLOBAL_LOCK(Glptr, acq)
#define ACPI_RELEASE_GLOBAL_LOCK(Glptr, acq)
#endif /* ACPI_ASM_MACROS */
#ifdef ACPI_APPLICATION
/* Don't want software interrupts within a ring3 application */
#undef BREAKPOINT3
#define BREAKPOINT3
#endif
/******************************************************************************
*
* Compiler-specific information is contained in the compiler-specific
* headers.
*
*****************************************************************************/
#endif /* __ACENV_H__ */