linux/drivers/usb/gadget/fsl_mxc_udc.c
Peter Chen c2c9caa947 usb: gadget: fsl_mxc_udc: replace MX35_IO_ADDRESS to ioremap
As mach/hardware.h is deleted, we can't visit platform code at driver.
It has no phy driver to combine with this controller, so it has to use
ioremap to map phy address as a workaround.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18 14:08:21 +02:00

123 lines
3.1 KiB
C

/*
* Copyright (C) 2009
* Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
*
* Description:
* Helper routines for i.MX3x SoCs from Freescale, needed by the fsl_usb2_udc.c
* driver to function correctly on these systems.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/fsl_devices.h>
#include <linux/platform_device.h>
#include <linux/io.h>
static struct clk *mxc_ahb_clk;
static struct clk *mxc_per_clk;
static struct clk *mxc_ipg_clk;
/* workaround ENGcm09152 for i.MX35 */
#define MX35_USBPHYCTRL_OFFSET 0x600
#define USBPHYCTRL_OTGBASE_OFFSET 0x8
#define USBPHYCTRL_EVDO (1 << 23)
int fsl_udc_clk_init(struct platform_device *pdev)
{
struct fsl_usb2_platform_data *pdata;
unsigned long freq;
int ret;
pdata = pdev->dev.platform_data;
mxc_ipg_clk = devm_clk_get(&pdev->dev, "ipg");
if (IS_ERR(mxc_ipg_clk)) {
dev_err(&pdev->dev, "clk_get(\"ipg\") failed\n");
return PTR_ERR(mxc_ipg_clk);
}
mxc_ahb_clk = devm_clk_get(&pdev->dev, "ahb");
if (IS_ERR(mxc_ahb_clk)) {
dev_err(&pdev->dev, "clk_get(\"ahb\") failed\n");
return PTR_ERR(mxc_ahb_clk);
}
mxc_per_clk = devm_clk_get(&pdev->dev, "per");
if (IS_ERR(mxc_per_clk)) {
dev_err(&pdev->dev, "clk_get(\"per\") failed\n");
return PTR_ERR(mxc_per_clk);
}
clk_prepare_enable(mxc_ipg_clk);
clk_prepare_enable(mxc_ahb_clk);
clk_prepare_enable(mxc_per_clk);
/* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
if (!strcmp(pdev->id_entry->name, "imx-udc-mx27")) {
freq = clk_get_rate(mxc_per_clk);
if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
(freq < 59999000 || freq > 60001000)) {
dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq);
ret = -EINVAL;
goto eclkrate;
}
}
return 0;
eclkrate:
clk_disable_unprepare(mxc_ipg_clk);
clk_disable_unprepare(mxc_ahb_clk);
clk_disable_unprepare(mxc_per_clk);
mxc_per_clk = NULL;
return ret;
}
int fsl_udc_clk_finalize(struct platform_device *pdev)
{
struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
int ret = 0;
/* workaround ENGcm09152 for i.MX35 */
if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) {
unsigned int v;
struct resource *res = platform_get_resource
(pdev, IORESOURCE_MEM, 0);
void __iomem *phy_regs = ioremap(res->start +
MX35_USBPHYCTRL_OFFSET, 512);
if (!phy_regs) {
dev_err(&pdev->dev, "ioremap for phy address fails\n");
ret = -EINVAL;
goto ioremap_err;
}
v = readl(phy_regs + USBPHYCTRL_OTGBASE_OFFSET);
writel(v | USBPHYCTRL_EVDO,
phy_regs + USBPHYCTRL_OTGBASE_OFFSET);
iounmap(phy_regs);
}
ioremap_err:
/* ULPI transceivers don't need usbpll */
if (pdata->phy_mode == FSL_USB2_PHY_ULPI) {
clk_disable_unprepare(mxc_per_clk);
mxc_per_clk = NULL;
}
return ret;
}
void fsl_udc_clk_release(void)
{
if (mxc_per_clk)
clk_disable_unprepare(mxc_per_clk);
clk_disable_unprepare(mxc_ahb_clk);
clk_disable_unprepare(mxc_ipg_clk);
}