linux/sound/soc/mxs/mxs-saif.c
Linus Torvalds 623ff7739e MTD merge for 3.4
Artem's cleanup of the MTD API continues apace.
 Fixes and improvements for ST FSMC and SuperH FLCTL NAND, amongst others.
 More work on DiskOnChip G3, new driver for DiskOnChip G4.
 Clean up debug/warning printks in JFFS2 to use pr_<level>.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iEYEABECAAYFAk92K6UACgkQdwG7hYl686NrMACfWQJRWasR78MWKfkT2vWZwTFJ
 X5AAoKiSYO2pfo5gWJGOAahNC1zUqMX0
 =i3Vb
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-3.4' of git://git.infradead.org/mtd-2.6

Pull MTD changes from David Woodhouse:
 - Artem's cleanup of the MTD API continues apace.
 - Fixes and improvements for ST FSMC and SuperH FLCTL NAND, amongst
   others.
 - More work on DiskOnChip G3, new driver for DiskOnChip G4.
 - Clean up debug/warning printks in JFFS2 to use pr_<level>.

Fix up various trivial conflicts, largely due to changes in calling
conventions for things like dmaengine_prep_slave_sg() (new inline
wrapper to hide new parameter, clashing with rewrite of previously last
parameter that used to be an 'append' flag, and is now a bitmap of
'unsigned long flags').

(Also some header file fallout - like so many merges this merge window -
and silly conflicts with sparse fixes)

* tag 'for-linus-3.4' of git://git.infradead.org/mtd-2.6: (120 commits)
  mtd: docg3 add protection against concurrency
  mtd: docg3 refactor cascade floors structure
  mtd: docg3 increase write/erase timeout
  mtd: docg3 fix inbound calculations
  mtd: nand: gpmi: fix function annotations
  mtd: phram: fix section mismatch for phram_setup
  mtd: unify initialization of erase_info->fail_addr
  mtd: support ONFI multi lun NAND
  mtd: sm_ftl: fix typo in major number.
  mtd: add device-tree support to spear_smi
  mtd: spear_smi: Remove default partition information from driver
  mtd: Add device-tree support to fsmc_nand
  mtd: fix section mismatch for doc_probe_device
  mtd: nand/fsmc: Remove sparse warnings and errors
  mtd: nand/fsmc: Add DMA support
  mtd: nand/fsmc: Access the NAND device word by word whenever possible
  mtd: nand/fsmc: Use dev_err to report error scenario
  mtd: nand/fsmc: Use devm routines
  mtd: nand/fsmc: Modify fsmc driver to accept nand timing parameters via platform
  mtd: fsmc_nand: add pm callbacks to support hibernation
  ...
2012-03-30 17:31:56 -07:00

762 lines
19 KiB
C

/*
* Copyright 2011 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/dma-mapping.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/time.h>
#include <linux/fsl/mxs-dma.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/saif.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <mach/mxs.h>
#include "mxs-saif.h"
static struct mxs_saif *mxs_saif[2];
/*
* SAIF is a little different with other normal SOC DAIs on clock using.
*
* For MXS, two SAIF modules are instantiated on-chip.
* Each SAIF has a set of clock pins and can be operating in master
* mode simultaneously if they are connected to different off-chip codecs.
* Also, one of the two SAIFs can master or drive the clock pins while the
* other SAIF, in slave mode, receives clocking from the master SAIF.
* This also means that both SAIFs must operate at the same sample rate.
*
* We abstract this as each saif has a master, the master could be
* himself or other saifs. In the generic saif driver, saif does not need
* to know the different clkmux. Saif only needs to know who is his master
* and operating his master to generate the proper clock rate for him.
* The master id is provided in mach-specific layer according to different
* clkmux setting.
*/
static int mxs_saif_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
int clk_id, unsigned int freq, int dir)
{
struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
switch (clk_id) {
case MXS_SAIF_MCLK:
saif->mclk = freq;
break;
default:
return -EINVAL;
}
return 0;
}
/*
* Since SAIF may work on EXTMASTER mode, IOW, it's working BITCLK&LRCLK
* is provided by other SAIF, we provide a interface here to get its master
* from its master_id.
* Note that the master could be himself.
*/
static inline struct mxs_saif *mxs_saif_get_master(struct mxs_saif * saif)
{
return mxs_saif[saif->master_id];
}
/*
* Set SAIF clock and MCLK
*/
static int mxs_saif_set_clk(struct mxs_saif *saif,
unsigned int mclk,
unsigned int rate)
{
u32 scr;
int ret;
struct mxs_saif *master_saif;
dev_dbg(saif->dev, "mclk %d rate %d\n", mclk, rate);
/* Set master saif to generate proper clock */
master_saif = mxs_saif_get_master(saif);
if (!master_saif)
return -EINVAL;
dev_dbg(saif->dev, "master saif%d\n", master_saif->id);
/* Checking if can playback and capture simutaneously */
if (master_saif->ongoing && rate != master_saif->cur_rate) {
dev_err(saif->dev,
"can not change clock, master saif%d(rate %d) is ongoing\n",
master_saif->id, master_saif->cur_rate);
return -EINVAL;
}
scr = __raw_readl(master_saif->base + SAIF_CTRL);
scr &= ~BM_SAIF_CTRL_BITCLK_MULT_RATE;
scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE;
/*
* Set SAIF clock
*
* The SAIF clock should be either 384*fs or 512*fs.
* If MCLK is used, the SAIF clk ratio need to match mclk ratio.
* For 32x mclk, set saif clk as 512*fs.
* For 48x mclk, set saif clk as 384*fs.
*
* If MCLK is not used, we just set saif clk to 512*fs.
*/
clk_prepare_enable(master_saif->clk);
if (master_saif->mclk_in_use) {
if (mclk % 32 == 0) {
scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE;
ret = clk_set_rate(master_saif->clk, 512 * rate);
} else if (mclk % 48 == 0) {
scr |= BM_SAIF_CTRL_BITCLK_BASE_RATE;
ret = clk_set_rate(master_saif->clk, 384 * rate);
} else {
/* SAIF MCLK should be either 32x or 48x */
clk_disable_unprepare(master_saif->clk);
return -EINVAL;
}
} else {
ret = clk_set_rate(master_saif->clk, 512 * rate);
scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE;
}
clk_disable_unprepare(master_saif->clk);
if (ret)
return ret;
master_saif->cur_rate = rate;
if (!master_saif->mclk_in_use) {
__raw_writel(scr, master_saif->base + SAIF_CTRL);
return 0;
}
/*
* Program the over-sample rate for MCLK output
*
* The available MCLK range is 32x, 48x... 512x. The rate
* could be from 8kHz to 192kH.
*/
switch (mclk / rate) {
case 32:
scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(4);
break;
case 64:
scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(3);
break;
case 128:
scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(2);
break;
case 256:
scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(1);
break;
case 512:
scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(0);
break;
case 48:
scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(3);
break;
case 96:
scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(2);
break;
case 192:
scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(1);
break;
case 384:
scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(0);
break;
default:
return -EINVAL;
}
__raw_writel(scr, master_saif->base + SAIF_CTRL);
return 0;
}
/*
* Put and disable MCLK.
*/
int mxs_saif_put_mclk(unsigned int saif_id)
{
struct mxs_saif *saif = mxs_saif[saif_id];
u32 stat;
if (!saif)
return -EINVAL;
stat = __raw_readl(saif->base + SAIF_STAT);
if (stat & BM_SAIF_STAT_BUSY) {
dev_err(saif->dev, "error: busy\n");
return -EBUSY;
}
clk_disable_unprepare(saif->clk);
/* disable MCLK output */
__raw_writel(BM_SAIF_CTRL_CLKGATE,
saif->base + SAIF_CTRL + MXS_SET_ADDR);
__raw_writel(BM_SAIF_CTRL_RUN,
saif->base + SAIF_CTRL + MXS_CLR_ADDR);
saif->mclk_in_use = 0;
return 0;
}
/*
* Get MCLK and set clock rate, then enable it
*
* This interface is used for codecs who are using MCLK provided
* by saif.
*/
int mxs_saif_get_mclk(unsigned int saif_id, unsigned int mclk,
unsigned int rate)
{
struct mxs_saif *saif = mxs_saif[saif_id];
u32 stat;
int ret;
struct mxs_saif *master_saif;
if (!saif)
return -EINVAL;
/* Clear Reset */
__raw_writel(BM_SAIF_CTRL_SFTRST,
saif->base + SAIF_CTRL + MXS_CLR_ADDR);
/* FIXME: need clear clk gate for register r/w */
__raw_writel(BM_SAIF_CTRL_CLKGATE,
saif->base + SAIF_CTRL + MXS_CLR_ADDR);
master_saif = mxs_saif_get_master(saif);
if (saif != master_saif) {
dev_err(saif->dev, "can not get mclk from a non-master saif\n");
return -EINVAL;
}
stat = __raw_readl(saif->base + SAIF_STAT);
if (stat & BM_SAIF_STAT_BUSY) {
dev_err(saif->dev, "error: busy\n");
return -EBUSY;
}
saif->mclk_in_use = 1;
ret = mxs_saif_set_clk(saif, mclk, rate);
if (ret)
return ret;
ret = clk_prepare_enable(saif->clk);
if (ret)
return ret;
/* enable MCLK output */
__raw_writel(BM_SAIF_CTRL_RUN,
saif->base + SAIF_CTRL + MXS_SET_ADDR);
return 0;
}
/*
* SAIF DAI format configuration.
* Should only be called when port is inactive.
*/
static int mxs_saif_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt)
{
u32 scr, stat;
u32 scr0;
struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
stat = __raw_readl(saif->base + SAIF_STAT);
if (stat & BM_SAIF_STAT_BUSY) {
dev_err(cpu_dai->dev, "error: busy\n");
return -EBUSY;
}
scr0 = __raw_readl(saif->base + SAIF_CTRL);
scr0 = scr0 & ~BM_SAIF_CTRL_BITCLK_EDGE & ~BM_SAIF_CTRL_LRCLK_POLARITY \
& ~BM_SAIF_CTRL_JUSTIFY & ~BM_SAIF_CTRL_DELAY;
scr = 0;
/* DAI mode */
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
/* data frame low 1clk before data */
scr |= BM_SAIF_CTRL_DELAY;
scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY;
break;
case SND_SOC_DAIFMT_LEFT_J:
/* data frame high with data */
scr &= ~BM_SAIF_CTRL_DELAY;
scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY;
scr &= ~BM_SAIF_CTRL_JUSTIFY;
break;
default:
return -EINVAL;
}
/* DAI clock inversion */
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_IB_IF:
scr |= BM_SAIF_CTRL_BITCLK_EDGE;
scr |= BM_SAIF_CTRL_LRCLK_POLARITY;
break;
case SND_SOC_DAIFMT_IB_NF:
scr |= BM_SAIF_CTRL_BITCLK_EDGE;
scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY;
break;
case SND_SOC_DAIFMT_NB_IF:
scr &= ~BM_SAIF_CTRL_BITCLK_EDGE;
scr |= BM_SAIF_CTRL_LRCLK_POLARITY;
break;
case SND_SOC_DAIFMT_NB_NF:
scr &= ~BM_SAIF_CTRL_BITCLK_EDGE;
scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY;
break;
}
/*
* Note: We simply just support master mode since SAIF TX can only
* work as master.
* Here the master is relative to codec side.
* Saif internally could be slave when working on EXTMASTER mode.
* We just hide this to machine driver.
*/
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBS_CFS:
if (saif->id == saif->master_id)
scr &= ~BM_SAIF_CTRL_SLAVE_MODE;
else
scr |= BM_SAIF_CTRL_SLAVE_MODE;
__raw_writel(scr | scr0, saif->base + SAIF_CTRL);
break;
default:
return -EINVAL;
}
return 0;
}
static int mxs_saif_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *cpu_dai)
{
struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
snd_soc_dai_set_dma_data(cpu_dai, substream, &saif->dma_param);
/* clear error status to 0 for each re-open */
saif->fifo_underrun = 0;
saif->fifo_overrun = 0;
/* Clear Reset for normal operations */
__raw_writel(BM_SAIF_CTRL_SFTRST,
saif->base + SAIF_CTRL + MXS_CLR_ADDR);
/* clear clock gate */
__raw_writel(BM_SAIF_CTRL_CLKGATE,
saif->base + SAIF_CTRL + MXS_CLR_ADDR);
return 0;
}
/*
* Should only be called when port is inactive.
* although can be called multiple times by upper layers.
*/
static int mxs_saif_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *cpu_dai)
{
struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
u32 scr, stat;
int ret;
/* mclk should already be set */
if (!saif->mclk && saif->mclk_in_use) {
dev_err(cpu_dai->dev, "set mclk first\n");
return -EINVAL;
}
stat = __raw_readl(saif->base + SAIF_STAT);
if (stat & BM_SAIF_STAT_BUSY) {
dev_err(cpu_dai->dev, "error: busy\n");
return -EBUSY;
}
/*
* Set saif clk based on sample rate.
* If mclk is used, we also set mclk, if not, saif->mclk is
* default 0, means not used.
*/
ret = mxs_saif_set_clk(saif, saif->mclk, params_rate(params));
if (ret) {
dev_err(cpu_dai->dev, "unable to get proper clk\n");
return ret;
}
scr = __raw_readl(saif->base + SAIF_CTRL);
scr &= ~BM_SAIF_CTRL_WORD_LENGTH;
scr &= ~BM_SAIF_CTRL_BITCLK_48XFS_ENABLE;
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
scr |= BF_SAIF_CTRL_WORD_LENGTH(0);
break;
case SNDRV_PCM_FORMAT_S20_3LE:
scr |= BF_SAIF_CTRL_WORD_LENGTH(4);
scr |= BM_SAIF_CTRL_BITCLK_48XFS_ENABLE;
break;
case SNDRV_PCM_FORMAT_S24_LE:
scr |= BF_SAIF_CTRL_WORD_LENGTH(8);
scr |= BM_SAIF_CTRL_BITCLK_48XFS_ENABLE;
break;
default:
return -EINVAL;
}
/* Tx/Rx config */
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
/* enable TX mode */
scr &= ~BM_SAIF_CTRL_READ_MODE;
} else {
/* enable RX mode */
scr |= BM_SAIF_CTRL_READ_MODE;
}
__raw_writel(scr, saif->base + SAIF_CTRL);
return 0;
}
static int mxs_saif_prepare(struct snd_pcm_substream *substream,
struct snd_soc_dai *cpu_dai)
{
struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
/* enable FIFO error irqs */
__raw_writel(BM_SAIF_CTRL_FIFO_ERROR_IRQ_EN,
saif->base + SAIF_CTRL + MXS_SET_ADDR);
return 0;
}
static int mxs_saif_trigger(struct snd_pcm_substream *substream, int cmd,
struct snd_soc_dai *cpu_dai)
{
struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
struct mxs_saif *master_saif;
u32 delay;
master_saif = mxs_saif_get_master(saif);
if (!master_saif)
return -EINVAL;
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
dev_dbg(cpu_dai->dev, "start\n");
clk_enable(master_saif->clk);
if (!master_saif->mclk_in_use)
__raw_writel(BM_SAIF_CTRL_RUN,
master_saif->base + SAIF_CTRL + MXS_SET_ADDR);
/*
* If the saif's master is not himself, we also need to enable
* itself clk for its internal basic logic to work.
*/
if (saif != master_saif) {
clk_enable(saif->clk);
__raw_writel(BM_SAIF_CTRL_RUN,
saif->base + SAIF_CTRL + MXS_SET_ADDR);
}
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
/*
* write a data to saif data register to trigger
* the transfer
*/
__raw_writel(0, saif->base + SAIF_DATA);
} else {
/*
* read a data from saif data register to trigger
* the receive
*/
__raw_readl(saif->base + SAIF_DATA);
}
master_saif->ongoing = 1;
dev_dbg(saif->dev, "CTRL 0x%x STAT 0x%x\n",
__raw_readl(saif->base + SAIF_CTRL),
__raw_readl(saif->base + SAIF_STAT));
dev_dbg(master_saif->dev, "CTRL 0x%x STAT 0x%x\n",
__raw_readl(master_saif->base + SAIF_CTRL),
__raw_readl(master_saif->base + SAIF_STAT));
break;
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
dev_dbg(cpu_dai->dev, "stop\n");
/* wait a while for the current sample to complete */
delay = USEC_PER_SEC / master_saif->cur_rate;
if (!master_saif->mclk_in_use) {
__raw_writel(BM_SAIF_CTRL_RUN,
master_saif->base + SAIF_CTRL + MXS_CLR_ADDR);
udelay(delay);
}
clk_disable(master_saif->clk);
if (saif != master_saif) {
__raw_writel(BM_SAIF_CTRL_RUN,
saif->base + SAIF_CTRL + MXS_CLR_ADDR);
udelay(delay);
clk_disable(saif->clk);
}
master_saif->ongoing = 0;
break;
default:
return -EINVAL;
}
return 0;
}
#define MXS_SAIF_RATES SNDRV_PCM_RATE_8000_192000
#define MXS_SAIF_FORMATS \
(SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
SNDRV_PCM_FMTBIT_S24_LE)
static const struct snd_soc_dai_ops mxs_saif_dai_ops = {
.startup = mxs_saif_startup,
.trigger = mxs_saif_trigger,
.prepare = mxs_saif_prepare,
.hw_params = mxs_saif_hw_params,
.set_sysclk = mxs_saif_set_dai_sysclk,
.set_fmt = mxs_saif_set_dai_fmt,
};
static int mxs_saif_dai_probe(struct snd_soc_dai *dai)
{
struct mxs_saif *saif = dev_get_drvdata(dai->dev);
snd_soc_dai_set_drvdata(dai, saif);
return 0;
}
static struct snd_soc_dai_driver mxs_saif_dai = {
.name = "mxs-saif",
.probe = mxs_saif_dai_probe,
.playback = {
.channels_min = 2,
.channels_max = 2,
.rates = MXS_SAIF_RATES,
.formats = MXS_SAIF_FORMATS,
},
.capture = {
.channels_min = 2,
.channels_max = 2,
.rates = MXS_SAIF_RATES,
.formats = MXS_SAIF_FORMATS,
},
.ops = &mxs_saif_dai_ops,
};
static irqreturn_t mxs_saif_irq(int irq, void *dev_id)
{
struct mxs_saif *saif = dev_id;
unsigned int stat;
stat = __raw_readl(saif->base + SAIF_STAT);
if (!(stat & (BM_SAIF_STAT_FIFO_UNDERFLOW_IRQ |
BM_SAIF_STAT_FIFO_OVERFLOW_IRQ)))
return IRQ_NONE;
if (stat & BM_SAIF_STAT_FIFO_UNDERFLOW_IRQ) {
dev_dbg(saif->dev, "underrun!!! %d\n", ++saif->fifo_underrun);
__raw_writel(BM_SAIF_STAT_FIFO_UNDERFLOW_IRQ,
saif->base + SAIF_STAT + MXS_CLR_ADDR);
}
if (stat & BM_SAIF_STAT_FIFO_OVERFLOW_IRQ) {
dev_dbg(saif->dev, "overrun!!! %d\n", ++saif->fifo_overrun);
__raw_writel(BM_SAIF_STAT_FIFO_OVERFLOW_IRQ,
saif->base + SAIF_STAT + MXS_CLR_ADDR);
}
dev_dbg(saif->dev, "SAIF_CTRL %x SAIF_STAT %x\n",
__raw_readl(saif->base + SAIF_CTRL),
__raw_readl(saif->base + SAIF_STAT));
return IRQ_HANDLED;
}
static int mxs_saif_probe(struct platform_device *pdev)
{
struct resource *iores, *dmares;
struct mxs_saif *saif;
struct mxs_saif_platform_data *pdata;
int ret = 0;
if (pdev->id >= ARRAY_SIZE(mxs_saif))
return -EINVAL;
saif = devm_kzalloc(&pdev->dev, sizeof(*saif), GFP_KERNEL);
if (!saif)
return -ENOMEM;
mxs_saif[pdev->id] = saif;
saif->id = pdev->id;
pdata = pdev->dev.platform_data;
if (pdata && !pdata->master_mode) {
saif->master_id = pdata->master_id;
if (saif->master_id < 0 ||
saif->master_id >= ARRAY_SIZE(mxs_saif) ||
saif->master_id == saif->id) {
dev_err(&pdev->dev, "get wrong master id\n");
return -EINVAL;
}
} else {
saif->master_id = saif->id;
}
saif->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(saif->clk)) {
ret = PTR_ERR(saif->clk);
dev_err(&pdev->dev, "Cannot get the clock: %d\n",
ret);
return ret;
}
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
saif->base = devm_request_and_ioremap(&pdev->dev, iores);
if (!saif->base) {
dev_err(&pdev->dev, "ioremap failed\n");
ret = -ENODEV;
goto failed_get_resource;
}
dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0);
if (!dmares) {
ret = -ENODEV;
dev_err(&pdev->dev, "failed to get dma resource: %d\n",
ret);
goto failed_get_resource;
}
saif->dma_param.chan_num = dmares->start;
saif->irq = platform_get_irq(pdev, 0);
if (saif->irq < 0) {
ret = saif->irq;
dev_err(&pdev->dev, "failed to get irq resource: %d\n",
ret);
goto failed_get_resource;
}
saif->dev = &pdev->dev;
ret = devm_request_irq(&pdev->dev, saif->irq, mxs_saif_irq, 0,
"mxs-saif", saif);
if (ret) {
dev_err(&pdev->dev, "failed to request irq\n");
goto failed_get_resource;
}
saif->dma_param.chan_irq = platform_get_irq(pdev, 1);
if (saif->dma_param.chan_irq < 0) {
ret = saif->dma_param.chan_irq;
dev_err(&pdev->dev, "failed to get dma irq resource: %d\n",
ret);
goto failed_get_resource;
}
platform_set_drvdata(pdev, saif);
ret = snd_soc_register_dai(&pdev->dev, &mxs_saif_dai);
if (ret) {
dev_err(&pdev->dev, "register DAI failed\n");
goto failed_get_resource;
}
saif->soc_platform_pdev = platform_device_alloc(
"mxs-pcm-audio", pdev->id);
if (!saif->soc_platform_pdev) {
ret = -ENOMEM;
goto failed_pdev_alloc;
}
platform_set_drvdata(saif->soc_platform_pdev, saif);
ret = platform_device_add(saif->soc_platform_pdev);
if (ret) {
dev_err(&pdev->dev, "failed to add soc platform device\n");
goto failed_pdev_add;
}
return 0;
failed_pdev_add:
platform_device_put(saif->soc_platform_pdev);
failed_pdev_alloc:
snd_soc_unregister_dai(&pdev->dev);
failed_get_resource:
clk_put(saif->clk);
return ret;
}
static int __devexit mxs_saif_remove(struct platform_device *pdev)
{
struct mxs_saif *saif = platform_get_drvdata(pdev);
platform_device_unregister(saif->soc_platform_pdev);
snd_soc_unregister_dai(&pdev->dev);
clk_put(saif->clk);
return 0;
}
static struct platform_driver mxs_saif_driver = {
.probe = mxs_saif_probe,
.remove = __devexit_p(mxs_saif_remove),
.driver = {
.name = "mxs-saif",
.owner = THIS_MODULE,
},
};
module_platform_driver(mxs_saif_driver);
MODULE_AUTHOR("Freescale Semiconductor, Inc.");
MODULE_DESCRIPTION("MXS ASoC SAIF driver");
MODULE_LICENSE("GPL");