linux/arch/tile/mm/migrate_64.S
Chris Metcalf 18aecc2b64 arch/tile: finish enabling support for TILE-Gx 64-bit chip
This support was partially present in the existing code (look for
"__tilegx__" ifdefs) but with this change you can build a working
kernel using the TILE-Gx toolchain and ARCH=tilegx.

Most of these files are new, generally adding a foo_64.c file
where previously there was just a foo_32.c file.

The ARCH=tilegx directive redirects to arch/tile, not arch/tilegx,
using the existing SRCARCH mechanism in the top-level Makefile.

Changes to existing files:

- <asm/bitops.h> and <asm/bitops_32.h> changed to factor the
  include of <asm-generic/bitops/non-atomic.h> in the common header.

- <asm/compat.h> and arch/tile/kernel/compat.c changed to remove
  the "const" markers I had put on compat_sys_execve() when trying
  to match some recent similar changes to the non-compat execve.
  It turns out the compat version wasn't "upgraded" to use const.

- <asm/opcode-tile_64.h> and <asm/opcode_constants_64.h> were
  previously included accidentally, with the 32-bit contents.  Now
  they have the proper 64-bit contents.

Finally, I had to hack the existing hacky drivers/input/input-compat.h
to add yet another "#ifdef" for INPUT_COMPAT_TEST (same as x86_64).

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> [drivers/input]
2011-05-12 15:52:12 -04:00

187 lines
3.9 KiB
ArmAsm

/*
* Copyright 2011 Tilera Corporation. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation, version 2.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for
* more details.
*
* This routine is a helper for migrating the home of a set of pages to
* a new cpu. See the documentation in homecache.c for more information.
*/
#include <linux/linkage.h>
#include <linux/threads.h>
#include <asm/page.h>
#include <asm/thread_info.h>
#include <asm/types.h>
#include <asm/asm-offsets.h>
#include <hv/hypervisor.h>
.text
/*
* First, some definitions that apply to all the code in the file.
*/
/* Locals (caller-save) */
#define r_tmp r10
#define r_save_sp r11
/* What we save where in the stack frame; must include all callee-saves. */
#define FRAME_SP 8
#define FRAME_R30 16
#define FRAME_R31 24
#define FRAME_R32 32
#define FRAME_R33 40
#define FRAME_SIZE 48
/*
* On entry:
*
* r0 the new context PA to install (moved to r_context)
* r1 PTE to use for context access (moved to r_access)
* r2 ASID to use for new context (moved to r_asid)
* r3 pointer to cpumask with just this cpu set in it (r_my_cpumask)
*/
/* Arguments (caller-save) */
#define r_context_in r0
#define r_access_in r1
#define r_asid_in r2
#define r_my_cpumask r3
/* Locals (callee-save); must not be more than FRAME_xxx above. */
#define r_save_ics r30
#define r_context r31
#define r_access r32
#define r_asid r33
/*
* Caller-save locals and frame constants are the same as
* for homecache_migrate_stack_and_flush.
*/
STD_ENTRY(flush_and_install_context)
/*
* Create a stack frame; we can't touch it once we flush the
* cache until we install the new page table and flush the TLB.
*/
{
move r_save_sp, sp
st sp, lr
addi sp, sp, -FRAME_SIZE
}
addi r_tmp, sp, FRAME_SP
{
st r_tmp, r_save_sp
addi r_tmp, sp, FRAME_R30
}
{
st r_tmp, r30
addi r_tmp, sp, FRAME_R31
}
{
st r_tmp, r31
addi r_tmp, sp, FRAME_R32
}
{
st r_tmp, r32
addi r_tmp, sp, FRAME_R33
}
st r_tmp, r33
/* Move some arguments to callee-save registers. */
{
move r_context, r_context_in
move r_access, r_access_in
}
move r_asid, r_asid_in
/* Disable interrupts, since we can't use our stack. */
{
mfspr r_save_ics, INTERRUPT_CRITICAL_SECTION
movei r_tmp, 1
}
mtspr INTERRUPT_CRITICAL_SECTION, r_tmp
/* First, flush our L2 cache. */
{
move r0, zero /* cache_pa */
moveli r1, hw2_last(HV_FLUSH_EVICT_L2) /* cache_control */
}
{
shl16insli r1, r1, hw1(HV_FLUSH_EVICT_L2)
move r2, r_my_cpumask /* cache_cpumask */
}
{
shl16insli r1, r1, hw0(HV_FLUSH_EVICT_L2)
move r3, zero /* tlb_va */
}
{
move r4, zero /* tlb_length */
move r5, zero /* tlb_pgsize */
}
{
move r6, zero /* tlb_cpumask */
move r7, zero /* asids */
}
{
move r8, zero /* asidcount */
jal hv_flush_remote
}
bnez r0, 1f
/* Now install the new page table. */
{
move r0, r_context
move r1, r_access
}
{
move r2, r_asid
movei r3, HV_CTX_DIRECTIO
}
jal hv_install_context
bnez r0, 1f
/* Finally, flush the TLB. */
{
movei r0, 0 /* preserve_global */
jal hv_flush_all
}
1: /* Reset interrupts back how they were before. */
mtspr INTERRUPT_CRITICAL_SECTION, r_save_ics
/* Restore the callee-saved registers and return. */
addli lr, sp, FRAME_SIZE
{
ld lr, lr
addli r_tmp, sp, FRAME_R30
}
{
ld r30, r_tmp
addli r_tmp, sp, FRAME_R31
}
{
ld r31, r_tmp
addli r_tmp, sp, FRAME_R32
}
{
ld r32, r_tmp
addli r_tmp, sp, FRAME_R33
}
{
ld r33, r_tmp
addi sp, sp, FRAME_SIZE
}
jrp lr
STD_ENDPROC(flush_and_install_context)