linux/drivers/regulator/max8997.c
Linus Torvalds ac1806572d regulator updates for 3.5
The major thing here is the addition of some helpers to factor code out
 of drivers, making a fair proportion of regulators much more just data
 rather than code which is nice.
 
 - Helpers in the core for regulators using regmap, providing generic
   implementations of the enable and voltage selection operations which
   just need data to describe them in the drivers.
 - Split out voltage mapping and voltage setting, allowing many more
   drivers to take advantage of the infrastructure for selectors.
 - Loads and loads of cleanups from Axel Lin once again, including many
   changes to take advantage of the above new framework features
 - New drivers for Ricoh RC5T583, TI TPS62362, TI TPS62363, TI TPS65913,
   TI TWL6035 and TI TWL6037.
 
 Some of the registration changes to support the core refactoring caused
 so many conflicts that eventually topic branches were abandoned for this
 release.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJPuhn4AAoJEBus8iNuMP3d6m4P/0gNiGbTwDlOgU/mPDyW2jJc
 xqvABzlOIQbI28/dgFYO/nA9YWW7VxpEaAPlkg4auk4wQ9tEyEjEqlOCfzymMetY
 0k6L4n8LqFsbMAeNQbFPbW7PpWp59oI97J9afJI4kEJmHmOlmlL9U82/TzUFfGrA
 yiPlzue+DotKB7FjsymLMbLyeFoiMSOIjVDk8OTs0u1EqeOo4nJG2ODLa+yGo+QW
 0yqQExEdIp28WXbkZQtmsOmj2V/uhkKAv2i2PDT2TmlduhNdCGxJsgZIiZCl1R4c
 vwirbfb+v93HAxvADdgj8eVdLJXQ0oItxr2ohKt8AgXIBrUJBsMkCQGvulZjRb+a
 /A/7Ea3o7HI+PQx4aIP0yGA/eBwbzo/cmBxU+KGzTA9Mov0fnK1kkUs6gfrYBdli
 U/TcMizDa1539BrKBIF2gmlRCKx8YD9ic27Zl1x4i5cgAP1gdYgdBYBybKHMpo2+
 9Xp1R9C8FvvgytIqJ3QQ34tRomZyQ5iUaIuIuAosoQ6iuF33EQ6I0FvHcIe74iOi
 zcu62ZPiuSwg1di9PrTERLcbrS81lvXpOWt5+EorzqoGXWzVIGoTh1F2kWEEMhaD
 Q6V5iE03VC0k3tj/MmtTiVkyhNkRElQDtekE9sfm15pdVnpu/+b+iicWJa7QFbZQ
 MybS0BBFQKhJXUDttKtS
 =UR7s
 -----END PGP SIGNATURE-----

Merge tag 'regulator-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "The major thing here is the addition of some helpers to factor code
  out of drivers, making a fair proportion of regulators much more just
  data rather than code which is nice.

  - Helpers in the core for regulators using regmap, providing generic
    implementations of the enable and voltage selection operations which
    just need data to describe them in the drivers.
  - Split out voltage mapping and voltage setting, allowing many more
    drivers to take advantage of the infrastructure for selectors.
  - Loads and loads of cleanups from Axel Lin once again, including many
    changes to take advantage of the above new framework features
  - New drivers for Ricoh RC5T583, TI TPS62362, TI TPS62363, TI
    TPS65913, TI TWL6035 and TI TWL6037.

  Some of the registration changes to support the core refactoring
  caused so many conflicts that eventually topic branches were abandoned
  for this release."

* tag 'regulator-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (227 commits)
  regulator: tps65910: use of_node of matched regulator being register
  regulator: tps65910: dt: support when "regulators" node found
  regulator: tps65910: add error message in case of failure
  regulator: tps62360: dt: initialize of_node param for regulator register.
  regulator: tps65910: use devm_* for memory allocation
  regulator: tps65910: use small letter for regulator names
  mfd: tpx6586x:  Depend on regulator
  regulator: regulator for Palmas Kconfig
  regulator: regulator driver for Palmas series chips
  regulator: Enable Device Tree for the db8500-prcmu regulator driver
  regulator: db8500-prcmu: Separate regulator registration from probe
  regulator: ab3100: Use regulator_map_voltage_iterate()
  regulator: tps65217: Convert to set_voltage_sel and map_voltage
  regulator: Enable the ab8500 for Device Tree
  regulator: ab8500: Split up probe() into manageable pieces
  regulator: max8925: Remove check_range function and max_uV from struct rc5t583_regulator_info
  regulator: max8649: Remove unused check_range() function
  regulator: rc5t583: Remove max_uV from struct rc5t583_regulator_info
  regulator: da9052: Convert to set_voltage_sel and map_voltage
  regulator: max8952: Use devm_kzalloc
  ...
2012-05-21 16:49:16 -07:00

1186 lines
30 KiB
C

/*
* max8997.c - Regulator driver for the Maxim 8997/8966
*
* Copyright (C) 2011 Samsung Electronics
* MyungJoo Ham <myungjoo.ham@smasung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* This driver is based on max8998.c
*/
#include <linux/bug.h>
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/mfd/max8997.h>
#include <linux/mfd/max8997-private.h>
struct max8997_data {
struct device *dev;
struct max8997_dev *iodev;
int num_regulators;
struct regulator_dev **rdev;
int ramp_delay; /* in mV/us */
bool buck1_gpiodvs;
bool buck2_gpiodvs;
bool buck5_gpiodvs;
u8 buck1_vol[8];
u8 buck2_vol[8];
u8 buck5_vol[8];
int buck125_gpios[3];
int buck125_gpioindex;
bool ignore_gpiodvs_side_effect;
u8 saved_states[MAX8997_REG_MAX];
};
static inline void max8997_set_gpio(struct max8997_data *max8997)
{
int set3 = (max8997->buck125_gpioindex) & 0x1;
int set2 = ((max8997->buck125_gpioindex) >> 1) & 0x1;
int set1 = ((max8997->buck125_gpioindex) >> 2) & 0x1;
gpio_set_value(max8997->buck125_gpios[0], set1);
gpio_set_value(max8997->buck125_gpios[1], set2);
gpio_set_value(max8997->buck125_gpios[2], set3);
}
struct voltage_map_desc {
int min;
int max;
int step;
};
/* Voltage maps in mV */
static const struct voltage_map_desc ldo_voltage_map_desc = {
.min = 800, .max = 3950, .step = 50,
}; /* LDO1 ~ 18, 21 all */
static const struct voltage_map_desc buck1245_voltage_map_desc = {
.min = 650, .max = 2225, .step = 25,
}; /* Buck1, 2, 4, 5 */
static const struct voltage_map_desc buck37_voltage_map_desc = {
.min = 750, .max = 3900, .step = 50,
}; /* Buck3, 7 */
/* current map in mA */
static const struct voltage_map_desc charger_current_map_desc = {
.min = 200, .max = 950, .step = 50,
};
static const struct voltage_map_desc topoff_current_map_desc = {
.min = 50, .max = 200, .step = 10,
};
static const struct voltage_map_desc *reg_voltage_map[] = {
[MAX8997_LDO1] = &ldo_voltage_map_desc,
[MAX8997_LDO2] = &ldo_voltage_map_desc,
[MAX8997_LDO3] = &ldo_voltage_map_desc,
[MAX8997_LDO4] = &ldo_voltage_map_desc,
[MAX8997_LDO5] = &ldo_voltage_map_desc,
[MAX8997_LDO6] = &ldo_voltage_map_desc,
[MAX8997_LDO7] = &ldo_voltage_map_desc,
[MAX8997_LDO8] = &ldo_voltage_map_desc,
[MAX8997_LDO9] = &ldo_voltage_map_desc,
[MAX8997_LDO10] = &ldo_voltage_map_desc,
[MAX8997_LDO11] = &ldo_voltage_map_desc,
[MAX8997_LDO12] = &ldo_voltage_map_desc,
[MAX8997_LDO13] = &ldo_voltage_map_desc,
[MAX8997_LDO14] = &ldo_voltage_map_desc,
[MAX8997_LDO15] = &ldo_voltage_map_desc,
[MAX8997_LDO16] = &ldo_voltage_map_desc,
[MAX8997_LDO17] = &ldo_voltage_map_desc,
[MAX8997_LDO18] = &ldo_voltage_map_desc,
[MAX8997_LDO21] = &ldo_voltage_map_desc,
[MAX8997_BUCK1] = &buck1245_voltage_map_desc,
[MAX8997_BUCK2] = &buck1245_voltage_map_desc,
[MAX8997_BUCK3] = &buck37_voltage_map_desc,
[MAX8997_BUCK4] = &buck1245_voltage_map_desc,
[MAX8997_BUCK5] = &buck1245_voltage_map_desc,
[MAX8997_BUCK6] = NULL,
[MAX8997_BUCK7] = &buck37_voltage_map_desc,
[MAX8997_EN32KHZ_AP] = NULL,
[MAX8997_EN32KHZ_CP] = NULL,
[MAX8997_ENVICHG] = NULL,
[MAX8997_ESAFEOUT1] = NULL,
[MAX8997_ESAFEOUT2] = NULL,
[MAX8997_CHARGER_CV] = NULL,
[MAX8997_CHARGER] = &charger_current_map_desc,
[MAX8997_CHARGER_TOPOFF] = &topoff_current_map_desc,
};
static int max8997_list_voltage_safeout(struct regulator_dev *rdev,
unsigned int selector)
{
int rid = rdev_get_id(rdev);
if (rid == MAX8997_ESAFEOUT1 || rid == MAX8997_ESAFEOUT2) {
switch (selector) {
case 0:
return 4850000;
case 1:
return 4900000;
case 2:
return 4950000;
case 3:
return 3300000;
default:
return -EINVAL;
}
}
return -EINVAL;
}
static int max8997_list_voltage_charger_cv(struct regulator_dev *rdev,
unsigned int selector)
{
int rid = rdev_get_id(rdev);
if (rid != MAX8997_CHARGER_CV)
goto err;
switch (selector) {
case 0x00:
return 4200000;
case 0x01 ... 0x0E:
return 4000000 + 20000 * (selector - 0x01);
case 0x0F:
return 4350000;
default:
return -EINVAL;
}
err:
return -EINVAL;
}
static int max8997_list_voltage(struct regulator_dev *rdev,
unsigned int selector)
{
const struct voltage_map_desc *desc;
int rid = rdev_get_id(rdev);
int val;
if (rid >= ARRAY_SIZE(reg_voltage_map) ||
rid < 0)
return -EINVAL;
desc = reg_voltage_map[rid];
if (desc == NULL)
return -EINVAL;
val = desc->min + desc->step * selector;
if (val > desc->max)
return -EINVAL;
return val * 1000;
}
static int max8997_get_enable_register(struct regulator_dev *rdev,
int *reg, int *mask, int *pattern)
{
int rid = rdev_get_id(rdev);
switch (rid) {
case MAX8997_LDO1 ... MAX8997_LDO21:
*reg = MAX8997_REG_LDO1CTRL + (rid - MAX8997_LDO1);
*mask = 0xC0;
*pattern = 0xC0;
break;
case MAX8997_BUCK1:
*reg = MAX8997_REG_BUCK1CTRL;
*mask = 0x01;
*pattern = 0x01;
break;
case MAX8997_BUCK2:
*reg = MAX8997_REG_BUCK2CTRL;
*mask = 0x01;
*pattern = 0x01;
break;
case MAX8997_BUCK3:
*reg = MAX8997_REG_BUCK3CTRL;
*mask = 0x01;
*pattern = 0x01;
break;
case MAX8997_BUCK4:
*reg = MAX8997_REG_BUCK4CTRL;
*mask = 0x01;
*pattern = 0x01;
break;
case MAX8997_BUCK5:
*reg = MAX8997_REG_BUCK5CTRL;
*mask = 0x01;
*pattern = 0x01;
break;
case MAX8997_BUCK6:
*reg = MAX8997_REG_BUCK6CTRL;
*mask = 0x01;
*pattern = 0x01;
break;
case MAX8997_BUCK7:
*reg = MAX8997_REG_BUCK7CTRL;
*mask = 0x01;
*pattern = 0x01;
break;
case MAX8997_EN32KHZ_AP ... MAX8997_EN32KHZ_CP:
*reg = MAX8997_REG_MAINCON1;
*mask = 0x01 << (rid - MAX8997_EN32KHZ_AP);
*pattern = 0x01 << (rid - MAX8997_EN32KHZ_AP);
break;
case MAX8997_ENVICHG:
*reg = MAX8997_REG_MBCCTRL1;
*mask = 0x80;
*pattern = 0x80;
break;
case MAX8997_ESAFEOUT1 ... MAX8997_ESAFEOUT2:
*reg = MAX8997_REG_SAFEOUTCTRL;
*mask = 0x40 << (rid - MAX8997_ESAFEOUT1);
*pattern = 0x40 << (rid - MAX8997_ESAFEOUT1);
break;
case MAX8997_CHARGER:
*reg = MAX8997_REG_MBCCTRL2;
*mask = 0x40;
*pattern = 0x40;
break;
default:
/* Not controllable or not exists */
return -EINVAL;
}
return 0;
}
static int max8997_reg_is_enabled(struct regulator_dev *rdev)
{
struct max8997_data *max8997 = rdev_get_drvdata(rdev);
struct i2c_client *i2c = max8997->iodev->i2c;
int ret, reg, mask, pattern;
u8 val;
ret = max8997_get_enable_register(rdev, &reg, &mask, &pattern);
if (ret)
return ret;
ret = max8997_read_reg(i2c, reg, &val);
if (ret)
return ret;
return (val & mask) == pattern;
}
static int max8997_reg_enable(struct regulator_dev *rdev)
{
struct max8997_data *max8997 = rdev_get_drvdata(rdev);
struct i2c_client *i2c = max8997->iodev->i2c;
int ret, reg, mask, pattern;
ret = max8997_get_enable_register(rdev, &reg, &mask, &pattern);
if (ret)
return ret;
return max8997_update_reg(i2c, reg, pattern, mask);
}
static int max8997_reg_disable(struct regulator_dev *rdev)
{
struct max8997_data *max8997 = rdev_get_drvdata(rdev);
struct i2c_client *i2c = max8997->iodev->i2c;
int ret, reg, mask, pattern;
ret = max8997_get_enable_register(rdev, &reg, &mask, &pattern);
if (ret)
return ret;
return max8997_update_reg(i2c, reg, ~pattern, mask);
}
static int max8997_get_voltage_register(struct regulator_dev *rdev,
int *_reg, int *_shift, int *_mask)
{
struct max8997_data *max8997 = rdev_get_drvdata(rdev);
int rid = rdev_get_id(rdev);
int reg, shift = 0, mask = 0x3f;
switch (rid) {
case MAX8997_LDO1 ... MAX8997_LDO21:
reg = MAX8997_REG_LDO1CTRL + (rid - MAX8997_LDO1);
break;
case MAX8997_BUCK1:
reg = MAX8997_REG_BUCK1DVS1;
if (max8997->buck1_gpiodvs)
reg += max8997->buck125_gpioindex;
break;
case MAX8997_BUCK2:
reg = MAX8997_REG_BUCK2DVS1;
if (max8997->buck2_gpiodvs)
reg += max8997->buck125_gpioindex;
break;
case MAX8997_BUCK3:
reg = MAX8997_REG_BUCK3DVS;
break;
case MAX8997_BUCK4:
reg = MAX8997_REG_BUCK4DVS;
break;
case MAX8997_BUCK5:
reg = MAX8997_REG_BUCK5DVS1;
if (max8997->buck5_gpiodvs)
reg += max8997->buck125_gpioindex;
break;
case MAX8997_BUCK7:
reg = MAX8997_REG_BUCK7DVS;
break;
case MAX8997_ESAFEOUT1 ... MAX8997_ESAFEOUT2:
reg = MAX8997_REG_SAFEOUTCTRL;
shift = (rid == MAX8997_ESAFEOUT2) ? 2 : 0;
mask = 0x3;
break;
case MAX8997_CHARGER_CV:
reg = MAX8997_REG_MBCCTRL3;
shift = 0;
mask = 0xf;
break;
case MAX8997_CHARGER:
reg = MAX8997_REG_MBCCTRL4;
shift = 0;
mask = 0xf;
break;
case MAX8997_CHARGER_TOPOFF:
reg = MAX8997_REG_MBCCTRL5;
shift = 0;
mask = 0xf;
break;
default:
return -EINVAL;
}
*_reg = reg;
*_shift = shift;
*_mask = mask;
return 0;
}
static int max8997_get_voltage_sel(struct regulator_dev *rdev)
{
struct max8997_data *max8997 = rdev_get_drvdata(rdev);
struct i2c_client *i2c = max8997->iodev->i2c;
int reg, shift, mask, ret;
u8 val;
ret = max8997_get_voltage_register(rdev, &reg, &shift, &mask);
if (ret)
return ret;
ret = max8997_read_reg(i2c, reg, &val);
if (ret)
return ret;
val >>= shift;
val &= mask;
return val;
}
static inline int max8997_get_voltage_proper_val(
const struct voltage_map_desc *desc,
int min_vol, int max_vol)
{
int i;
if (desc == NULL)
return -EINVAL;
if (max_vol < desc->min || min_vol > desc->max)
return -EINVAL;
if (min_vol < desc->min)
min_vol = desc->min;
i = DIV_ROUND_UP(min_vol - desc->min, desc->step);
if (desc->min + desc->step * i > max_vol)
return -EINVAL;
return i;
}
static int max8997_set_voltage_charger_cv(struct regulator_dev *rdev,
int min_uV, int max_uV, unsigned *selector)
{
struct max8997_data *max8997 = rdev_get_drvdata(rdev);
struct i2c_client *i2c = max8997->iodev->i2c;
int rid = rdev_get_id(rdev);
int lb, ub;
int reg, shift = 0, mask, ret = 0;
u8 val = 0x0;
if (rid != MAX8997_CHARGER_CV)
return -EINVAL;
ret = max8997_get_voltage_register(rdev, &reg, &shift, &mask);
if (ret)
return ret;
if (max_uV < 4000000 || min_uV > 4350000)
return -EINVAL;
if (min_uV <= 4000000) {
if (max_uV >= 4000000)
return -EINVAL;
else
val = 0x1;
} else if (min_uV <= 4200000 && max_uV >= 4200000)
val = 0x0;
else {
lb = (min_uV - 4000001) / 20000 + 2;
ub = (max_uV - 4000000) / 20000 + 1;
if (lb > ub)
return -EINVAL;
if (lb < 0xf)
val = lb;
else {
if (ub >= 0xf)
val = 0xf;
else
return -EINVAL;
}
}
*selector = val;
ret = max8997_update_reg(i2c, reg, val << shift, mask);
return ret;
}
/*
* For LDO1 ~ LDO21, BUCK1~5, BUCK7, CHARGER, CHARGER_TOPOFF
* BUCK1, 2, and 5 are available if they are not controlled by gpio
*/
static int max8997_set_voltage_ldobuck(struct regulator_dev *rdev,
int min_uV, int max_uV, unsigned *selector)
{
struct max8997_data *max8997 = rdev_get_drvdata(rdev);
struct i2c_client *i2c = max8997->iodev->i2c;
int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
const struct voltage_map_desc *desc;
int rid = rdev_get_id(rdev);
int i, reg, shift, mask, ret;
switch (rid) {
case MAX8997_LDO1 ... MAX8997_LDO21:
break;
case MAX8997_BUCK1 ... MAX8997_BUCK5:
break;
case MAX8997_BUCK6:
return -EINVAL;
case MAX8997_BUCK7:
break;
case MAX8997_CHARGER:
break;
case MAX8997_CHARGER_TOPOFF:
break;
default:
return -EINVAL;
}
desc = reg_voltage_map[rid];
i = max8997_get_voltage_proper_val(desc, min_vol, max_vol);
if (i < 0)
return i;
ret = max8997_get_voltage_register(rdev, &reg, &shift, &mask);
if (ret)
return ret;
ret = max8997_update_reg(i2c, reg, i << shift, mask << shift);
*selector = i;
return ret;
}
static int max8997_set_voltage_ldobuck_time_sel(struct regulator_dev *rdev,
unsigned int old_selector,
unsigned int new_selector)
{
struct max8997_data *max8997 = rdev_get_drvdata(rdev);
int rid = rdev_get_id(rdev);
const struct voltage_map_desc *desc = reg_voltage_map[rid];
/* Delay is required only if the voltage is increasing */
if (old_selector >= new_selector)
return 0;
/* No need to delay if gpio_dvs_mode */
switch (rid) {
case MAX8997_BUCK1:
if (max8997->buck1_gpiodvs)
return 0;
break;
case MAX8997_BUCK2:
if (max8997->buck2_gpiodvs)
return 0;
break;
case MAX8997_BUCK5:
if (max8997->buck5_gpiodvs)
return 0;
break;
}
switch (rid) {
case MAX8997_BUCK1:
case MAX8997_BUCK2:
case MAX8997_BUCK4:
case MAX8997_BUCK5:
return DIV_ROUND_UP(desc->step * (new_selector - old_selector),
max8997->ramp_delay);
}
return 0;
}
/*
* Assess the damage on the voltage setting of BUCK1,2,5 by the change.
*
* When GPIO-DVS mode is used for multiple bucks, changing the voltage value
* of one of the bucks may affect that of another buck, which is the side
* effect of the change (set_voltage). This function examines the GPIO-DVS
* configurations and checks whether such side-effect exists.
*/
static int max8997_assess_side_effect(struct regulator_dev *rdev,
u8 new_val, int *best)
{
struct max8997_data *max8997 = rdev_get_drvdata(rdev);
int rid = rdev_get_id(rdev);
u8 *buckx_val[3];
bool buckx_gpiodvs[3];
int side_effect[8];
int min_side_effect = INT_MAX;
int i;
*best = -1;
switch (rid) {
case MAX8997_BUCK1:
rid = 0;
break;
case MAX8997_BUCK2:
rid = 1;
break;
case MAX8997_BUCK5:
rid = 2;
break;
default:
return -EINVAL;
}
buckx_val[0] = max8997->buck1_vol;
buckx_val[1] = max8997->buck2_vol;
buckx_val[2] = max8997->buck5_vol;
buckx_gpiodvs[0] = max8997->buck1_gpiodvs;
buckx_gpiodvs[1] = max8997->buck2_gpiodvs;
buckx_gpiodvs[2] = max8997->buck5_gpiodvs;
for (i = 0; i < 8; i++) {
int others;
if (new_val != (buckx_val[rid])[i]) {
side_effect[i] = -1;
continue;
}
side_effect[i] = 0;
for (others = 0; others < 3; others++) {
int diff;
if (others == rid)
continue;
if (buckx_gpiodvs[others] == false)
continue; /* Not affected */
diff = (buckx_val[others])[i] -
(buckx_val[others])[max8997->buck125_gpioindex];
if (diff > 0)
side_effect[i] += diff;
else if (diff < 0)
side_effect[i] -= diff;
}
if (side_effect[i] == 0) {
*best = i;
return 0; /* NO SIDE EFFECT! Use This! */
}
if (side_effect[i] < min_side_effect) {
min_side_effect = side_effect[i];
*best = i;
}
}
if (*best == -1)
return -EINVAL;
return side_effect[*best];
}
/*
* For Buck 1 ~ 5 and 7. If it is not controlled by GPIO, this calls
* max8997_set_voltage_ldobuck to do the job.
*/
static int max8997_set_voltage_buck(struct regulator_dev *rdev,
int min_uV, int max_uV, unsigned *selector)
{
struct max8997_data *max8997 = rdev_get_drvdata(rdev);
int rid = rdev_get_id(rdev);
const struct voltage_map_desc *desc;
int new_val, new_idx, damage, tmp_val, tmp_idx, tmp_dmg;
bool gpio_dvs_mode = false;
int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
if (rid < MAX8997_BUCK1 || rid > MAX8997_BUCK7)
return -EINVAL;
switch (rid) {
case MAX8997_BUCK1:
if (max8997->buck1_gpiodvs)
gpio_dvs_mode = true;
break;
case MAX8997_BUCK2:
if (max8997->buck2_gpiodvs)
gpio_dvs_mode = true;
break;
case MAX8997_BUCK5:
if (max8997->buck5_gpiodvs)
gpio_dvs_mode = true;
break;
}
if (!gpio_dvs_mode)
return max8997_set_voltage_ldobuck(rdev, min_uV, max_uV,
selector);
desc = reg_voltage_map[rid];
new_val = max8997_get_voltage_proper_val(desc, min_vol, max_vol);
if (new_val < 0)
return new_val;
tmp_dmg = INT_MAX;
tmp_idx = -1;
tmp_val = -1;
do {
damage = max8997_assess_side_effect(rdev, new_val, &new_idx);
if (damage == 0)
goto out;
if (tmp_dmg > damage) {
tmp_idx = new_idx;
tmp_val = new_val;
tmp_dmg = damage;
}
new_val++;
} while (desc->min + desc->step * new_val <= desc->max);
new_idx = tmp_idx;
new_val = tmp_val;
if (max8997->ignore_gpiodvs_side_effect == false)
return -EINVAL;
dev_warn(&rdev->dev, "MAX8997 GPIO-DVS Side Effect Warning: GPIO SET:"
" %d -> %d\n", max8997->buck125_gpioindex, tmp_idx);
out:
if (new_idx < 0 || new_val < 0)
return -EINVAL;
max8997->buck125_gpioindex = new_idx;
max8997_set_gpio(max8997);
*selector = new_val;
return 0;
}
static const int safeoutvolt[] = {
3300000,
4850000,
4900000,
4950000,
};
/* For SAFEOUT1 and SAFEOUT2 */
static int max8997_set_voltage_safeout(struct regulator_dev *rdev,
int min_uV, int max_uV, unsigned *selector)
{
struct max8997_data *max8997 = rdev_get_drvdata(rdev);
struct i2c_client *i2c = max8997->iodev->i2c;
int rid = rdev_get_id(rdev);
int reg, shift = 0, mask, ret;
int i = 0;
u8 val;
if (rid != MAX8997_ESAFEOUT1 && rid != MAX8997_ESAFEOUT2)
return -EINVAL;
for (i = 0; i < ARRAY_SIZE(safeoutvolt); i++) {
if (min_uV <= safeoutvolt[i] &&
max_uV >= safeoutvolt[i])
break;
}
if (i >= ARRAY_SIZE(safeoutvolt))
return -EINVAL;
if (i == 0)
val = 0x3;
else
val = i - 1;
ret = max8997_get_voltage_register(rdev, &reg, &shift, &mask);
if (ret)
return ret;
ret = max8997_update_reg(i2c, reg, val << shift, mask << shift);
*selector = val;
return ret;
}
static int max8997_reg_disable_suspend(struct regulator_dev *rdev)
{
struct max8997_data *max8997 = rdev_get_drvdata(rdev);
struct i2c_client *i2c = max8997->iodev->i2c;
int ret, reg, mask, pattern;
int rid = rdev_get_id(rdev);
ret = max8997_get_enable_register(rdev, &reg, &mask, &pattern);
if (ret)
return ret;
max8997_read_reg(i2c, reg, &max8997->saved_states[rid]);
if (rid == MAX8997_LDO1 ||
rid == MAX8997_LDO10 ||
rid == MAX8997_LDO21) {
dev_dbg(&rdev->dev, "Conditional Power-Off for %s\n",
rdev->desc->name);
return max8997_update_reg(i2c, reg, 0x40, mask);
}
dev_dbg(&rdev->dev, "Full Power-Off for %s (%xh -> %xh)\n",
rdev->desc->name, max8997->saved_states[rid] & mask,
(~pattern) & mask);
return max8997_update_reg(i2c, reg, ~pattern, mask);
}
static struct regulator_ops max8997_ldo_ops = {
.list_voltage = max8997_list_voltage,
.is_enabled = max8997_reg_is_enabled,
.enable = max8997_reg_enable,
.disable = max8997_reg_disable,
.get_voltage_sel = max8997_get_voltage_sel,
.set_voltage = max8997_set_voltage_ldobuck,
.set_voltage_time_sel = max8997_set_voltage_ldobuck_time_sel,
.set_suspend_disable = max8997_reg_disable_suspend,
};
static struct regulator_ops max8997_buck_ops = {
.list_voltage = max8997_list_voltage,
.is_enabled = max8997_reg_is_enabled,
.enable = max8997_reg_enable,
.disable = max8997_reg_disable,
.get_voltage_sel = max8997_get_voltage_sel,
.set_voltage = max8997_set_voltage_buck,
.set_voltage_time_sel = max8997_set_voltage_ldobuck_time_sel,
.set_suspend_disable = max8997_reg_disable_suspend,
};
static struct regulator_ops max8997_fixedvolt_ops = {
.list_voltage = max8997_list_voltage,
.is_enabled = max8997_reg_is_enabled,
.enable = max8997_reg_enable,
.disable = max8997_reg_disable,
.set_suspend_disable = max8997_reg_disable_suspend,
};
static struct regulator_ops max8997_safeout_ops = {
.list_voltage = max8997_list_voltage_safeout,
.is_enabled = max8997_reg_is_enabled,
.enable = max8997_reg_enable,
.disable = max8997_reg_disable,
.get_voltage_sel = max8997_get_voltage_sel,
.set_voltage = max8997_set_voltage_safeout,
.set_suspend_disable = max8997_reg_disable_suspend,
};
static struct regulator_ops max8997_fixedstate_ops = {
.list_voltage = max8997_list_voltage_charger_cv,
.get_voltage_sel = max8997_get_voltage_sel,
.set_voltage = max8997_set_voltage_charger_cv,
};
static int max8997_set_current_limit(struct regulator_dev *rdev,
int min_uA, int max_uA)
{
unsigned dummy;
int rid = rdev_get_id(rdev);
if (rid != MAX8997_CHARGER && rid != MAX8997_CHARGER_TOPOFF)
return -EINVAL;
/* Reuse max8997_set_voltage_ldobuck to set current_limit. */
return max8997_set_voltage_ldobuck(rdev, min_uA, max_uA, &dummy);
}
static int max8997_get_current_limit(struct regulator_dev *rdev)
{
int sel, rid = rdev_get_id(rdev);
if (rid != MAX8997_CHARGER && rid != MAX8997_CHARGER_TOPOFF)
return -EINVAL;
sel = max8997_get_voltage_sel(rdev);
if (sel < 0)
return sel;
/* Reuse max8997_list_voltage to get current_limit. */
return max8997_list_voltage(rdev, sel);
}
static struct regulator_ops max8997_charger_ops = {
.is_enabled = max8997_reg_is_enabled,
.enable = max8997_reg_enable,
.disable = max8997_reg_disable,
.get_current_limit = max8997_get_current_limit,
.set_current_limit = max8997_set_current_limit,
};
static struct regulator_ops max8997_charger_fixedstate_ops = {
.get_current_limit = max8997_get_current_limit,
.set_current_limit = max8997_set_current_limit,
};
#define MAX8997_VOLTAGE_REGULATOR(_name, _ops) {\
.name = #_name, \
.id = MAX8997_##_name, \
.ops = &_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
}
#define MAX8997_CURRENT_REGULATOR(_name, _ops) {\
.name = #_name, \
.id = MAX8997_##_name, \
.ops = &_ops, \
.type = REGULATOR_CURRENT, \
.owner = THIS_MODULE, \
}
static struct regulator_desc regulators[] = {
MAX8997_VOLTAGE_REGULATOR(LDO1, max8997_ldo_ops),
MAX8997_VOLTAGE_REGULATOR(LDO2, max8997_ldo_ops),
MAX8997_VOLTAGE_REGULATOR(LDO3, max8997_ldo_ops),
MAX8997_VOLTAGE_REGULATOR(LDO4, max8997_ldo_ops),
MAX8997_VOLTAGE_REGULATOR(LDO5, max8997_ldo_ops),
MAX8997_VOLTAGE_REGULATOR(LDO6, max8997_ldo_ops),
MAX8997_VOLTAGE_REGULATOR(LDO7, max8997_ldo_ops),
MAX8997_VOLTAGE_REGULATOR(LDO8, max8997_ldo_ops),
MAX8997_VOLTAGE_REGULATOR(LDO9, max8997_ldo_ops),
MAX8997_VOLTAGE_REGULATOR(LDO10, max8997_ldo_ops),
MAX8997_VOLTAGE_REGULATOR(LDO11, max8997_ldo_ops),
MAX8997_VOLTAGE_REGULATOR(LDO12, max8997_ldo_ops),
MAX8997_VOLTAGE_REGULATOR(LDO13, max8997_ldo_ops),
MAX8997_VOLTAGE_REGULATOR(LDO14, max8997_ldo_ops),
MAX8997_VOLTAGE_REGULATOR(LDO15, max8997_ldo_ops),
MAX8997_VOLTAGE_REGULATOR(LDO16, max8997_ldo_ops),
MAX8997_VOLTAGE_REGULATOR(LDO17, max8997_ldo_ops),
MAX8997_VOLTAGE_REGULATOR(LDO18, max8997_ldo_ops),
MAX8997_VOLTAGE_REGULATOR(LDO21, max8997_ldo_ops),
MAX8997_VOLTAGE_REGULATOR(BUCK1, max8997_buck_ops),
MAX8997_VOLTAGE_REGULATOR(BUCK2, max8997_buck_ops),
MAX8997_VOLTAGE_REGULATOR(BUCK3, max8997_buck_ops),
MAX8997_VOLTAGE_REGULATOR(BUCK4, max8997_buck_ops),
MAX8997_VOLTAGE_REGULATOR(BUCK5, max8997_buck_ops),
MAX8997_VOLTAGE_REGULATOR(BUCK6, max8997_fixedvolt_ops),
MAX8997_VOLTAGE_REGULATOR(BUCK7, max8997_buck_ops),
MAX8997_VOLTAGE_REGULATOR(EN32KHZ_AP, max8997_fixedvolt_ops),
MAX8997_VOLTAGE_REGULATOR(EN32KHZ_CP, max8997_fixedvolt_ops),
MAX8997_VOLTAGE_REGULATOR(ENVICHG, max8997_fixedvolt_ops),
MAX8997_VOLTAGE_REGULATOR(ESAFEOUT1, max8997_safeout_ops),
MAX8997_VOLTAGE_REGULATOR(ESAFEOUT2, max8997_safeout_ops),
MAX8997_VOLTAGE_REGULATOR(CHARGER_CV, max8997_fixedstate_ops),
MAX8997_CURRENT_REGULATOR(CHARGER, max8997_charger_ops),
MAX8997_CURRENT_REGULATOR(CHARGER_TOPOFF,
max8997_charger_fixedstate_ops),
};
static __devinit int max8997_pmic_probe(struct platform_device *pdev)
{
struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent);
struct max8997_platform_data *pdata = dev_get_platdata(iodev->dev);
struct regulator_config config = { };
struct regulator_dev **rdev;
struct max8997_data *max8997;
struct i2c_client *i2c;
int i, ret, size;
u8 max_buck1 = 0, max_buck2 = 0, max_buck5 = 0;
if (!pdata) {
dev_err(pdev->dev.parent, "No platform init data supplied.\n");
return -ENODEV;
}
max8997 = devm_kzalloc(&pdev->dev, sizeof(struct max8997_data),
GFP_KERNEL);
if (!max8997)
return -ENOMEM;
size = sizeof(struct regulator_dev *) * pdata->num_regulators;
max8997->rdev = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
if (!max8997->rdev)
return -ENOMEM;
rdev = max8997->rdev;
max8997->dev = &pdev->dev;
max8997->iodev = iodev;
max8997->num_regulators = pdata->num_regulators;
platform_set_drvdata(pdev, max8997);
i2c = max8997->iodev->i2c;
max8997->buck125_gpioindex = pdata->buck125_default_idx;
max8997->buck1_gpiodvs = pdata->buck1_gpiodvs;
max8997->buck2_gpiodvs = pdata->buck2_gpiodvs;
max8997->buck5_gpiodvs = pdata->buck5_gpiodvs;
memcpy(max8997->buck125_gpios, pdata->buck125_gpios, sizeof(int) * 3);
max8997->ignore_gpiodvs_side_effect = pdata->ignore_gpiodvs_side_effect;
for (i = 0; i < 8; i++) {
max8997->buck1_vol[i] = ret =
max8997_get_voltage_proper_val(
&buck1245_voltage_map_desc,
pdata->buck1_voltage[i] / 1000,
pdata->buck1_voltage[i] / 1000 +
buck1245_voltage_map_desc.step);
if (ret < 0)
goto err_out;
max8997->buck2_vol[i] = ret =
max8997_get_voltage_proper_val(
&buck1245_voltage_map_desc,
pdata->buck2_voltage[i] / 1000,
pdata->buck2_voltage[i] / 1000 +
buck1245_voltage_map_desc.step);
if (ret < 0)
goto err_out;
max8997->buck5_vol[i] = ret =
max8997_get_voltage_proper_val(
&buck1245_voltage_map_desc,
pdata->buck5_voltage[i] / 1000,
pdata->buck5_voltage[i] / 1000 +
buck1245_voltage_map_desc.step);
if (ret < 0)
goto err_out;
if (max_buck1 < max8997->buck1_vol[i])
max_buck1 = max8997->buck1_vol[i];
if (max_buck2 < max8997->buck2_vol[i])
max_buck2 = max8997->buck2_vol[i];
if (max_buck5 < max8997->buck5_vol[i])
max_buck5 = max8997->buck5_vol[i];
}
/* For the safety, set max voltage before setting up */
for (i = 0; i < 8; i++) {
max8997_update_reg(i2c, MAX8997_REG_BUCK1DVS1 + i,
max_buck1, 0x3f);
max8997_update_reg(i2c, MAX8997_REG_BUCK2DVS1 + i,
max_buck2, 0x3f);
max8997_update_reg(i2c, MAX8997_REG_BUCK5DVS1 + i,
max_buck5, 0x3f);
}
/*
* If buck 1, 2, and 5 do not care DVS GPIO settings, ignore them.
* If at least one of them cares, set gpios.
*/
if (pdata->buck1_gpiodvs || pdata->buck2_gpiodvs ||
pdata->buck5_gpiodvs) {
bool gpio1set = false, gpio2set = false;
if (!gpio_is_valid(pdata->buck125_gpios[0]) ||
!gpio_is_valid(pdata->buck125_gpios[1]) ||
!gpio_is_valid(pdata->buck125_gpios[2])) {
dev_err(&pdev->dev, "GPIO NOT VALID\n");
ret = -EINVAL;
goto err_out;
}
ret = gpio_request(pdata->buck125_gpios[0],
"MAX8997 SET1");
if (ret == -EBUSY)
dev_warn(&pdev->dev, "Duplicated gpio request"
" on SET1\n");
else if (ret)
goto err_out;
else
gpio1set = true;
ret = gpio_request(pdata->buck125_gpios[1],
"MAX8997 SET2");
if (ret == -EBUSY)
dev_warn(&pdev->dev, "Duplicated gpio request"
" on SET2\n");
else if (ret) {
if (gpio1set)
gpio_free(pdata->buck125_gpios[0]);
goto err_out;
} else
gpio2set = true;
ret = gpio_request(pdata->buck125_gpios[2],
"MAX8997 SET3");
if (ret == -EBUSY)
dev_warn(&pdev->dev, "Duplicated gpio request"
" on SET3\n");
else if (ret) {
if (gpio1set)
gpio_free(pdata->buck125_gpios[0]);
if (gpio2set)
gpio_free(pdata->buck125_gpios[1]);
goto err_out;
}
gpio_direction_output(pdata->buck125_gpios[0],
(max8997->buck125_gpioindex >> 2)
& 0x1); /* SET1 */
gpio_direction_output(pdata->buck125_gpios[1],
(max8997->buck125_gpioindex >> 1)
& 0x1); /* SET2 */
gpio_direction_output(pdata->buck125_gpios[2],
(max8997->buck125_gpioindex >> 0)
& 0x1); /* SET3 */
ret = 0;
}
/* DVS-GPIO disabled */
max8997_update_reg(i2c, MAX8997_REG_BUCK1CTRL, (pdata->buck1_gpiodvs) ?
(1 << 1) : (0 << 1), 1 << 1);
max8997_update_reg(i2c, MAX8997_REG_BUCK2CTRL, (pdata->buck2_gpiodvs) ?
(1 << 1) : (0 << 1), 1 << 1);
max8997_update_reg(i2c, MAX8997_REG_BUCK5CTRL, (pdata->buck5_gpiodvs) ?
(1 << 1) : (0 << 1), 1 << 1);
/* Initialize all the DVS related BUCK registers */
for (i = 0; i < 8; i++) {
max8997_update_reg(i2c, MAX8997_REG_BUCK1DVS1 + i,
max8997->buck1_vol[i],
0x3f);
max8997_update_reg(i2c, MAX8997_REG_BUCK2DVS1 + i,
max8997->buck2_vol[i],
0x3f);
max8997_update_reg(i2c, MAX8997_REG_BUCK5DVS1 + i,
max8997->buck5_vol[i],
0x3f);
}
/* Misc Settings */
max8997->ramp_delay = 10; /* set 10mV/us, which is the default */
max8997_write_reg(i2c, MAX8997_REG_BUCKRAMP, (0xf << 4) | 0x9);
for (i = 0; i < pdata->num_regulators; i++) {
const struct voltage_map_desc *desc;
int id = pdata->regulators[i].id;
desc = reg_voltage_map[id];
if (desc)
regulators[id].n_voltages =
(desc->max - desc->min) / desc->step + 1;
else if (id == MAX8997_ESAFEOUT1 || id == MAX8997_ESAFEOUT2)
regulators[id].n_voltages = 4;
else if (id == MAX8997_CHARGER_CV)
regulators[id].n_voltages = 16;
config.dev = max8997->dev;
config.init_data = pdata->regulators[i].initdata;
config.driver_data = max8997;
rdev[i] = regulator_register(&regulators[id], &config);
if (IS_ERR(rdev[i])) {
ret = PTR_ERR(rdev[i]);
dev_err(max8997->dev, "regulator init failed for %d\n",
id);
rdev[i] = NULL;
goto err;
}
}
return 0;
err:
while (--i >= 0)
regulator_unregister(rdev[i]);
err_out:
return ret;
}
static int __devexit max8997_pmic_remove(struct platform_device *pdev)
{
struct max8997_data *max8997 = platform_get_drvdata(pdev);
struct regulator_dev **rdev = max8997->rdev;
int i;
for (i = 0; i < max8997->num_regulators; i++)
regulator_unregister(rdev[i]);
return 0;
}
static const struct platform_device_id max8997_pmic_id[] = {
{ "max8997-pmic", 0},
{ },
};
MODULE_DEVICE_TABLE(platform, max8997_pmic_id);
static struct platform_driver max8997_pmic_driver = {
.driver = {
.name = "max8997-pmic",
.owner = THIS_MODULE,
},
.probe = max8997_pmic_probe,
.remove = __devexit_p(max8997_pmic_remove),
.id_table = max8997_pmic_id,
};
static int __init max8997_pmic_init(void)
{
return platform_driver_register(&max8997_pmic_driver);
}
subsys_initcall(max8997_pmic_init);
static void __exit max8997_pmic_cleanup(void)
{
platform_driver_unregister(&max8997_pmic_driver);
}
module_exit(max8997_pmic_cleanup);
MODULE_DESCRIPTION("MAXIM 8997/8966 Regulator Driver");
MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
MODULE_LICENSE("GPL");