linux/arch/ppc/platforms/chestnut.h
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

129 lines
4.2 KiB
C

/*
* arch/ppc/platforms/chestnut.h
*
* Definitions for IBM 750FXGX Eval (Chestnut)
*
* Author: <source@mvista.com>
*
* Based on Artesyn Katana code done by Tim Montgomery <timm@artesyncp.com>
* Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il
* Based on code done by Mark A. Greer <mgreer@mvista.com>
*
* <2004> (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
/*
* This is the CPU physical memory map (windows must be at least 1MB and start
* on a boundary that is a multiple of the window size):
*
* Seems on the IBM 750FXGX Eval board, the MV64460 Registers can be in
* only 2 places per switch U17 0x14000000 or 0xf1000000 easily - chose to
* implement at 0xf1000000 only at this time
*
* 0xfff00000-0xffffffff - 8 Flash
* 0xffe00000-0xffefffff - BOOT SRAM
* 0xffd00000-0xffd00004 - CPLD
* 0xffc00000-0xffc0000f - UART
* 0xffb00000-0xffb07fff - FRAM
* 0xff840000-0xffafffff - *** HOLE ***
* 0xff800000-0xff83ffff - MV64460 Integrated SRAM
* 0xfe000000-0xff8fffff - *** HOLE ***
* 0xfc000000-0xfdffffff - 32bit Flash
* 0xf1010000-0xfbffffff - *** HOLE ***
* 0xf1000000-0xf100ffff - MV64460 Registers
*/
#ifndef __PPC_PLATFORMS_CHESTNUT_H__
#define __PPC_PLATFORMS_CHESTNUT_H__
#define CHESTNUT_BOOT_8BIT_BASE 0xfff00000
#define CHESTNUT_BOOT_8BIT_SIZE_ACTUAL (1024*1024)
#define CHESTNUT_BOOT_SRAM_BASE 0xffe00000
#define CHESTNUT_BOOT_SRAM_SIZE_ACTUAL (1024*1024)
#define CHESTNUT_CPLD_BASE 0xffd00000
#define CHESTNUT_CPLD_SIZE_ACTUAL 5
#define CHESTNUT_CPLD_REG3 (CHESTNUT_CPLD_BASE+3)
#define CHESTNUT_UART_BASE 0xffc00000
#define CHESTNUT_UART_SIZE_ACTUAL 16
#define CHESTNUT_FRAM_BASE 0xffb00000
#define CHESTNUT_FRAM_SIZE_ACTUAL (32*1024)
#define CHESTNUT_INTERNAL_SRAM_BASE 0xff800000
#define CHESTNUT_32BIT_BASE 0xfc000000
#define CHESTNUT_32BIT_SIZE (32*1024*1024)
#define CHESTNUT_BOOT_8BIT_SIZE max(MV64360_WINDOW_SIZE_MIN, \
CHESTNUT_BOOT_8BIT_SIZE_ACTUAL)
#define CHESTNUT_BOOT_SRAM_SIZE max(MV64360_WINDOW_SIZE_MIN, \
CHESTNUT_BOOT_SRAM_SIZE_ACTUAL)
#define CHESTNUT_CPLD_SIZE max(MV64360_WINDOW_SIZE_MIN, \
CHESTNUT_CPLD_SIZE_ACTUAL)
#define CHESTNUT_UART_SIZE max(MV64360_WINDOW_SIZE_MIN, \
CHESTNUT_UART_SIZE_ACTUAL)
#define CHESTNUT_FRAM_SIZE max(MV64360_WINDOW_SIZE_MIN, \
CHESTNUT_FRAM_SIZE_ACTUAL)
#define CHESTNUT_BUS_SPEED 200000000
#define CHESTNUT_PIBS_DATABASE 0xf0000 /* from PIBS src code */
#define KATANA_ETH0_PHY_ADDR 12
#define KATANA_ETH1_PHY_ADDR 11
#define KATANA_ETH2_PHY_ADDR 4
#define CHESTNUT_ETH_TX_QUEUE_SIZE 800
#define CHESTNUT_ETH_RX_QUEUE_SIZE 400
/*
* PCI windows
*/
#define CHESTNUT_PCI0_MEM_PROC_ADDR 0x80000000
#define CHESTNUT_PCI0_MEM_PCI_HI_ADDR 0x00000000
#define CHESTNUT_PCI0_MEM_PCI_LO_ADDR 0x80000000
#define CHESTNUT_PCI0_MEM_SIZE 0x10000000
#define CHESTNUT_PCI0_IO_PROC_ADDR 0xa0000000
#define CHESTNUT_PCI0_IO_PCI_ADDR 0x00000000
#define CHESTNUT_PCI0_IO_SIZE 0x01000000
/*
* Board-specific IRQ info
*/
#define CHESTNUT_PCI_SLOT0_IRQ (64 + 31)
#define CHESTNUT_PCI_SLOT1_IRQ (64 + 30)
#define CHESTNUT_PCI_SLOT2_IRQ (64 + 29)
#define CHESTNUT_PCI_SLOT3_IRQ (64 + 28)
/* serial port definitions */
#define CHESTNUT_UART0_IO_BASE (CHESTNUT_UART_BASE + 8)
#define CHESTNUT_UART1_IO_BASE CHESTNUT_UART_BASE
#define UART0_INT (64 + 25)
#define UART1_INT (64 + 26)
#ifdef CONFIG_SERIAL_MANY_PORTS
#define RS_TABLE_SIZE 64
#else
#define RS_TABLE_SIZE 2
#endif
/* Rate for the 3.6864 Mhz clock for the onboard serial chip */
#define BASE_BAUD (3686400 / 16)
#ifdef CONFIG_SERIAL_DETECT_IRQ
#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST|ASYNC_AUTO_IRQ)
#else
#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST)
#endif
#define STD_UART_OP(num) \
{ 0, BASE_BAUD, 0, UART##num##_INT, STD_COM_FLAGS, \
iomem_base: (u8 *)CHESTNUT_UART##num##_IO_BASE, \
io_type: SERIAL_IO_MEM},
#define SERIAL_PORT_DFNS \
STD_UART_OP(0) \
STD_UART_OP(1)
#endif /* __PPC_PLATFORMS_CHESTNUT_H__ */