linux/drivers/char/rio/cirrus.h
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

463 lines
17 KiB
C

/****************************************************************************
******* *******
******* CIRRUS.H *******
******* *******
****************************************************************************
Author : Jeremy Rolls
Date : 3 Aug 1990
*
* (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
Version : 0.01
Mods
----------------------------------------------------------------------------
Date By Description
----------------------------------------------------------------------------
***************************************************************************/
#ifndef _cirrus_h
#ifndef lint
/* static char* _cirrus_h_sccs = "@(#)cirrus.h 1.16"; */
#endif
#define _cirrus_h 1
#ifdef RTA
#define TO_UART RX
#define TO_DRIVER TX
#endif
#ifdef HOST
#define TO_UART TX
#define TO_DRIVER RX
#endif
#ifdef RTA
/* Miscellaneous defines for CIRRUS addresses and related logic for
interrupts etc.
*/
#define MAP(a) ((short *)(cirrus_base + (a)))
#define outp(a,b) (*MAP (a) =(b))
#define inp(a) ((*MAP (a)) & 0xff)
#define CIRRUS_FIRST (short*)0x7300
#define CIRRUS_SECOND (short*)0x7200
#define CIRRUS_THIRD (short*)0x7100
#define CIRRUS_FOURTH (short*)0x7000
#define PORTS_ON_CIRRUS 4
#define CIRRUS_FIFO_SIZE 12
#define SPACE 0x20
#define TAB 0x09
#define LINE_FEED 0x0a
#define CARRIAGE_RETURN 0x0d
#define BACKSPACE 0x08
#define SPACES_IN_TABS 8
#define SEND_ESCAPE 0x00
#define START_BREAK 0x81
#define TIMER_TICK 0x82
#define STOP_BREAK 0x83
#define BASE(a) ((a) < 4 ? (short*)CIRRUS_FIRST : ((a) < 8 ? (short *)CIRRUS_SECOND : ((a) < 12 ? (short*)CIRRUS_THIRD : (short *)CIRRUS_FOURTH)))
#define txack1 ((short *)0x7104)
#define rxack1 ((short *)0x7102)
#define mdack1 ((short *)0x7106)
#define txack2 ((short *)0x7006)
#define rxack2 ((short *)0x7004)
#define mdack2 ((short *)0x7100)
#define int_latch ((short *) 0x7800)
#define int_status ((short *) 0x7c00)
#define tx1_pending 0x20
#define rx1_pending 0x10
#define md1_pending 0x40
#define tx2_pending 0x02
#define rx2_pending 0x01
#define md2_pending 0x40
#define module1_bits 0x07
#define module1_modern 0x08
#define module2_bits 0x70
#define module2_modern 0x80
#define module_blank 0xf
#define rs232_d25 0x0
#define rs232_rj45 0x1
#define rs422_d25 0x3
#define parallel 0x5
#define CLK0 0x00
#define CLK1 0x01
#define CLK2 0x02
#define CLK3 0x03
#define CLK4 0x04
#define CIRRUS_REVC 0x42
#define CIRRUS_REVE 0x44
#define TURNON 1
#define TURNOFF 0
/* The list of CIRRUS registers.
NB. These registers are relative values on 8 bit boundaries whereas
on the RTA's the CIRRUS registers are on word boundaries. Use pointer
arithmetic (short *) to obtain the real addresses required */
#define ccr 0x05 /* Channel Command Register */
#define ier 0x06 /* Interrupt Enable Register */
#define cor1 0x08 /* Channel Option Register 1 */
#define cor2 0x09 /* Channel Option Register 2 */
#define cor3 0x0a /* Channel Option Register 3 */
#define cor4 0x1e /* Channel Option Register 4 */
#define cor5 0x1f /* Channel Option Register 5 */
#define ccsr 0x0b /* Channel Control Status Register */
#define rdcr 0x0e /* Receive Data Count Register */
#define tdcr 0x12 /* Transmit Data Count Register */
#define mcor1 0x15 /* Modem Change Option Register 1 */
#define mcor2 0x16 /* Modem Change Option Regsiter 2 */
#define livr 0x18 /* Local Interrupt Vector Register */
#define schr1 0x1a /* Special Character Register 1 */
#define schr2 0x1b /* Special Character Register 2 */
#define schr3 0x1c /* Special Character Register 3 */
#define schr4 0x1d /* Special Character Register 4 */
#define rtr 0x20 /* Receive Timer Register */
#define rtpr 0x21 /* Receive Timeout Period Register */
#define lnc 0x24 /* Lnext character */
#define rivr 0x43 /* Receive Interrupt Vector Register */
#define tivr 0x42 /* Transmit Interrupt Vector Register */
#define mivr 0x41 /* Modem Interrupt Vector Register */
#define gfrcr 0x40 /* Global Firmware Revision code Reg */
#define ricr 0x44 /* Receive Interrupting Channel Reg */
#define ticr 0x45 /* Transmit Interrupting Channel Reg */
#define micr 0x46 /* Modem Interrupting Channel Register */
#define gcr 0x4b /* Global configuration register*/
#define misr 0x4c /* Modem interrupt status register */
#define rbusr 0x59
#define tbusr 0x5a
#define mbusr 0x5b
#define eoir 0x60 /* End Of Interrupt Register */
#define rdsr 0x62 /* Receive Data / Status Register */
#define tdr 0x63 /* Transmit Data Register */
#define svrr 0x67 /* Service Request Register */
#define car 0x68 /* Channel Access Register */
#define mir 0x69 /* Modem Interrupt Register */
#define tir 0x6a /* Transmit Interrupt Register */
#define rir 0x6b /* Receive Interrupt Register */
#define msvr1 0x6c /* Modem Signal Value Register 1 */
#define msvr2 0x6d /* Modem Signal Value Register 2*/
#define psvr 0x6f /* Printer Signal Value Register*/
#define tbpr 0x72 /* Transmit Baud Rate Period Register */
#define tcor 0x76 /* Transmit Clock Option Register */
#define rbpr 0x78 /* Receive Baud Rate Period Register */
#define rber 0x7a /* Receive Baud Rate Extension Register */
#define rcor 0x7c /* Receive Clock Option Register*/
#define ppr 0x7e /* Prescalar Period Register */
/* Misc registers used for forcing the 1400 out of its reset woes */
#define airl 0x6d
#define airm 0x6e
#define airh 0x6f
#define btcr 0x66
#define mtcr 0x6c
#define tber 0x74
#endif /* #ifdef RTA */
/* Bit fields for particular registers */
/* GCR */
#define GCR_SERIAL 0x00 /* Configure as serial channel */
#define GCR_PARALLEL 0x80 /* Configure as parallel channel */
/* RDSR - when status read from FIFO */
#define RDSR_BREAK 0x08 /* Break received */
#define RDSR_TIMEOUT 0x80 /* No new data timeout */
#define RDSR_SC1 0x10 /* Special char 1 (tx XON) matched */
#define RDSR_SC2 0x20 /* Special char 2 (tx XOFF) matched */
#define RDSR_SC12_MASK 0x30 /* Mask for special chars 1 and 2 */
/* PPR */
#define PPR_DEFAULT 0x31 /* Default value - for a 25Mhz clock gives
a timeout period of 1ms */
/* LIVR */
#define LIVR_EXCEPTION 0x07 /* Receive exception interrupt */
/* CCR */
#define CCR_RESET 0x80 /* Reset channel */
#define CCR_CHANGE 0x4e /* COR's have changed - NB always change all
COR's */
#define CCR_WFLUSH 0x82 /* Flush transmit FIFO and TSR / THR */
#define CCR_SENDSC1 0x21 /* Send special character one */
#define CCR_SENDSC2 0x22 /* Send special character two */
#define CCR_SENDSC3 0x23 /* Send special character three */
#define CCR_SENDSC4 0x24 /* Send special character four */
#define CCR_TENABLE 0x18 /* Enable transmitter */
#define CCR_TDISABLE 0x14 /* Disable transmitter */
#define CCR_RENABLE 0x12 /* Enable receiver */
#define CCR_RDISABLE 0x11 /* Disable receiver */
#define CCR_READY 0x00 /* CCR is ready for another command */
/* CCSR */
#define CCSR_TXENABLE 0x08 /* Transmitter enable */
#define CCSR_RXENABLE 0x80 /* Receiver enable */
#define CCSR_TXFLOWOFF 0x04 /* Transmit flow off */
#define CCSR_TXFLOWON 0x02 /* Transmit flow on */
/* SVRR */
#define SVRR_RECEIVE 0x01 /* Receive interrupt pending */
#define SVRR_TRANSMIT 0x02 /* Transmit interrupt pending */
#define SVRR_MODEM 0x04 /* Modem interrupt pending */
/* CAR */
#define CAR_PORTS 0x03 /* Bit fields for ports */
/* IER */
#define IER_MODEM 0x80 /* Change in modem status */
#define IER_RECEIVE 0x10 /* Good data / data exception */
#define IER_TRANSMITR 0x04 /* Transmit ready (FIFO empty) */
#define IER_TRANSMITE 0x02 /* Transmit empty */
#define IER_TIMEOUT 0x01 /* Timeout on no data */
#define IER_DEFAULT 0x94 /* Default values */
#define IER_PARALLEL 0x84 /* Default for Parallel */
#define IER_EMPTY 0x92 /* Transmitter empty rather than ready */
/* COR1 - Driver only */
#define COR1_INPCK 0x10 /* Check parity of received characters */
/* COR1 - driver and RTA */
#define COR1_ODD 0x80 /* Odd parity */
#define COR1_EVEN 0x00 /* Even parity */
#define COR1_NOP 0x00 /* No parity */
#define COR1_FORCE 0x20 /* Force parity */
#define COR1_NORMAL 0x40 /* With parity */
#define COR1_1STOP 0x00 /* 1 stop bit */
#define COR1_15STOP 0x04 /* 1.5 stop bits */
#define COR1_2STOP 0x08 /* 2 stop bits */
#define COR1_5BITS 0x00 /* 5 data bits */
#define COR1_6BITS 0x01 /* 6 data bits */
#define COR1_7BITS 0x02 /* 7 data bits */
#define COR1_8BITS 0x03 /* 8 data bits */
#define COR1_HOST 0xef /* Safe host bits */
/* RTA only */
#define COR1_CINPCK 0x00 /* Check parity of received characters */
#define COR1_CNINPCK 0x10 /* Don't check parity */
/* COR2 bits for both RTA and driver use */
#define COR2_IXANY 0x80 /* IXANY - any character is XON */
#define COR2_IXON 0x40 /* IXON - enable tx soft flowcontrol */
#define COR2_RTSFLOW 0x02 /* Enable tx hardware flow control */
/* Additional driver bits */
#define COR2_HUPCL 0x20 /* Hang up on close */
#define COR2_CTSFLOW 0x04 /* Enable rx hardware flow control */
#define COR2_IXOFF 0x01 /* Enable rx software flow control */
#define COR2_DTRFLOW 0x08 /* Enable tx hardware flow control */
/* RTA use only */
#define COR2_ETC 0x20 /* Embedded transmit options */
#define COR2_LOCAL 0x10 /* Local loopback mode */
#define COR2_REMOTE 0x08 /* Remote loopback mode */
#define COR2_HOST 0xc2 /* Safe host bits */
/* COR3 - RTA use only */
#define COR3_SCDRNG 0x80 /* Enable special char detect for range */
#define COR3_SCD34 0x40 /* Special character detect for SCHR's 3 + 4 */
#define COR3_FCT 0x20 /* Flow control transparency */
#define COR3_SCD12 0x10 /* Special character detect for SCHR's 1 + 2 */
#define COR3_FIFO12 0x0c /* 12 chars for receive FIFO threshold */
#define COR3_FIFO10 0x0a /* 10 chars for receive FIFO threshold */
#define COR3_FIFO8 0x08 /* 8 chars for receive FIFO threshold */
#define COR3_FIFO6 0x06 /* 6 chars for receive FIFO threshold */
#define COR3_THRESHOLD COR3_FIFO8 /* MUST BE LESS THAN MCOR_THRESHOLD */
#define COR3_DEFAULT (COR3_FCT | COR3_THRESHOLD)
/* Default bits for COR3 */
/* COR4 driver and RTA use */
#define COR4_IGNCR 0x80 /* Throw away CR's on input */
#define COR4_ICRNL 0x40 /* Map CR -> NL on input */
#define COR4_INLCR 0x20 /* Map NL -> CR on input */
#define COR4_IGNBRK 0x10 /* Ignore Break */
#define COR4_NBRKINT 0x08 /* No interrupt on break (-BRKINT) */
#define COR4_RAISEMOD 0x01 /* Raise modem output lines on non-zero baud */
/* COR4 driver only */
#define COR4_IGNPAR 0x04 /* IGNPAR (ignore characters with errors) */
#define COR4_PARMRK 0x02 /* PARMRK */
#define COR4_HOST 0xf8 /* Safe host bits */
/* COR4 RTA only */
#define COR4_CIGNPAR 0x02 /* Thrown away bad characters */
#define COR4_CPARMRK 0x04 /* PARMRK characters */
#define COR4_CNPARMRK 0x03 /* Don't PARMRK */
/* COR5 driver and RTA use */
#define COR5_ISTRIP 0x80 /* Strip input chars to 7 bits */
#define COR5_LNE 0x40 /* Enable LNEXT processing */
#define COR5_CMOE 0x20 /* Match good and errored characters */
#define COR5_ONLCR 0x02 /* NL -> CR NL on output */
#define COR5_OCRNL 0x01 /* CR -> NL on output */
/*
** Spare bits - these are not used in the CIRRUS registers, so we use
** them to set various other features.
*/
/*
** tstop and tbusy indication
*/
#define COR5_TSTATE_ON 0x08 /* Turn on monitoring of tbusy and tstop */
#define COR5_TSTATE_OFF 0x04 /* Turn off monitoring of tbusy and tstop */
/*
** TAB3
*/
#define COR5_TAB3 0x10 /* TAB3 mode */
#define COR5_HOST 0xc3 /* Safe host bits */
/* CCSR */
#define CCSR_TXFLOFF 0x04 /* Tx is xoffed */
/* MSVR1 */
/* NB. DTR / CD swapped from Cirrus spec as the pins are also reversed on the
RTA. This is because otherwise DCD would get lost on the 1 parallel / 3
serial option.
*/
#define MSVR1_CD 0x80 /* CD (DSR on Cirrus) */
#define MSVR1_RTS 0x40 /* RTS (CTS on Cirrus) */
#define MSVR1_RI 0x20 /* RI */
#define MSVR1_DTR 0x10 /* DTR (CD on Cirrus) */
#define MSVR1_CTS 0x01 /* CTS output pin (RTS on Cirrus) */
/* Next two used to indicate state of tbusy and tstop to driver */
#define MSVR1_TSTOP 0x08 /* Set if port flow controlled */
#define MSVR1_TEMPTY 0x04 /* Set if port tx buffer empty */
#define MSVR1_HOST 0xf3 /* The bits the host wants */
/* MSVR2 */
#define MSVR2_DSR 0x02 /* DSR output pin (DTR on Cirrus) */
/* MCOR */
#define MCOR_CD 0x80 /* CD (DSR on Cirrus) */
#define MCOR_RTS 0x40 /* RTS (CTS on Cirrus) */
#define MCOR_RI 0x20 /* RI */
#define MCOR_DTR 0x10 /* DTR (CD on Cirrus) */
#define MCOR_DEFAULT (MCOR_CD | MCOR_RTS | MCOR_RI | MCOR_DTR)
#define MCOR_FULLMODEM MCOR_DEFAULT
#define MCOR_RJ45 (MCOR_CD | MCOR_RTS | MCOR_DTR)
#define MCOR_RESTRICTED (MCOR_CD | MCOR_RTS)
/* More MCOR - H/W Handshake (flowcontrol) stuff */
#define MCOR_THRESH8 0x08 /* eight characters then we stop */
#define MCOR_THRESH9 0x09 /* nine characters then we stop */
#define MCOR_THRESH10 0x0A /* ten characters then we stop */
#define MCOR_THRESH11 0x0B /* eleven characters then we stop */
#define MCOR_THRESHBITS 0x0F /* mask for ANDing out the above */
#define MCOR_THRESHOLD MCOR_THRESH9 /* MUST BE GREATER THAN COR3_THRESHOLD */
/* RTPR */
#define RTPR_DEFAULT 0x02 /* Default */
/* Defines for the subscripts of a CONFIG packet */
#define CONFIG_COR1 1 /* Option register 1 */
#define CONFIG_COR2 2 /* Option register 2 */
#define CONFIG_COR4 3 /* Option register 4 */
#define CONFIG_COR5 4 /* Option register 5 */
#define CONFIG_TXXON 5 /* Tx XON character */
#define CONFIG_TXXOFF 6 /* Tx XOFF character */
#define CONFIG_RXXON 7 /* Rx XON character */
#define CONFIG_RXXOFF 8 /* Rx XOFF character */
#define CONFIG_LNEXT 9 /* LNEXT character */
#define CONFIG_TXBAUD 10 /* Tx baud rate */
#define CONFIG_RXBAUD 11 /* Rx baud rate */
/* Port status stuff */
#define IDLE_CLOSED 0 /* Closed */
#define IDLE_OPEN 1 /* Idle open */
#define IDLE_BREAK 2 /* Idle on break */
/* Subscript of MODEM STATUS packet */
#define MODEM_VALUE 3 /* Current values of handshake pins */
/* Subscript of SBREAK packet */
#define BREAK_LENGTH 1 /* Length of a break in slices of 0.01 seconds
0 = stay on break until an EBREAK command
is sent */
#define PRE_EMPTIVE 0x80 /* Pre-emptive bit in command field */
/* Packet types going from Host to remote - with the exception of OPEN, MOPEN,
CONFIG, SBREAK and MEMDUMP the remaining bytes of the data array will not
be used
*/
#define OPEN 0x00 /* Open a port */
#define CONFIG 0x01 /* Configure a port */
#define MOPEN 0x02 /* Modem open (block for DCD) */
#define CLOSE 0x03 /* Close a port */
#define WFLUSH (0x04 | PRE_EMPTIVE) /* Write flush */
#define RFLUSH (0x05 | PRE_EMPTIVE) /* Read flush */
#define RESUME (0x06 | PRE_EMPTIVE) /* Resume if xoffed */
#define SBREAK 0x07 /* Start break */
#define EBREAK 0x08 /* End break */
#define SUSPEND (0x09 | PRE_EMPTIVE) /* Susp op (behave as tho xoffed) */
#define FCLOSE (0x0a | PRE_EMPTIVE) /* Force close */
#define XPRINT 0x0b /* Xprint packet */
#define MBIS (0x0c | PRE_EMPTIVE) /* Set modem lines */
#define MBIC (0x0d | PRE_EMPTIVE) /* Clear modem lines */
#define MSET (0x0e | PRE_EMPTIVE) /* Set modem lines */
#define PCLOSE 0x0f /* Pseudo close - Leaves rx/tx enabled */
#define MGET (0x10 | PRE_EMPTIVE) /* Force update of modem status */
#define MEMDUMP (0x11 | PRE_EMPTIVE) /* Send back mem from addr supplied */
#define READ_REGISTER (0x12 | PRE_EMPTIVE) /* Read CD1400 register (debug) */
/* "Command" packets going from remote to host COMPLETE and MODEM_STATUS
use data[4] / data[3] to indicate current state and modem status respectively
*/
#define COMPLETE (0x20 | PRE_EMPTIVE)
/* Command complete */
#define BREAK_RECEIVED (0x21 | PRE_EMPTIVE)
/* Break received */
#define MODEM_STATUS (0x22 | PRE_EMPTIVE)
/* Change in modem status */
/* "Command" packet that could go either way - handshake wake-up */
#define HANDSHAKE (0x23 | PRE_EMPTIVE)
/* Wake-up to HOST / RTA */
#endif