246835fccd
The Cintiq 24HD has three LEDs on the left side of the tablet and three LEDs on the right side of the tablet. Switching to LED 0, 1, or 2 will enable the top, middle, or bottom LED for the respective side. Switching to LED 3 turns off the LEDs on the respective side. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
73 lines
3 KiB
Text
73 lines
3 KiB
Text
What: /sys/class/hidraw/hidraw*/device/speed
|
|
Date: April 2010
|
|
Kernel Version: 2.6.35
|
|
Contact: linux-bluetooth@vger.kernel.org
|
|
Description:
|
|
The /sys/class/hidraw/hidraw*/device/speed file controls
|
|
reporting speed of Wacom bluetooth tablet. Reading from
|
|
this file returns 1 if tablet reports in high speed mode
|
|
or 0 otherwise. Writing to this file one of these values
|
|
switches reporting speed.
|
|
|
|
What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/led
|
|
Date: August 2011
|
|
Contact: linux-input@vger.kernel.org
|
|
Description:
|
|
Attribute group for control of the status LEDs and the OLEDs.
|
|
This attribute group is only available for Intuos 4 M, L,
|
|
and XL (with LEDs and OLEDs) and Cintiq 21UX2 and Cintiq 24HD
|
|
(LEDs only). Therefore its presence implicitly signifies the
|
|
presence of said LEDs and OLEDs on the tablet device.
|
|
|
|
What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status0_luminance
|
|
Date: August 2011
|
|
Contact: linux-input@vger.kernel.org
|
|
Description:
|
|
Writing to this file sets the status LED luminance (1..127)
|
|
when the stylus does not touch the tablet surface, and no
|
|
button is pressed on the stylus. This luminance level is
|
|
normally lower than the level when a button is pressed.
|
|
|
|
What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status1_luminance
|
|
Date: August 2011
|
|
Contact: linux-input@vger.kernel.org
|
|
Description:
|
|
Writing to this file sets the status LED luminance (1..127)
|
|
when the stylus touches the tablet surface, or any button is
|
|
pressed on the stylus.
|
|
|
|
What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status_led0_select
|
|
Date: August 2011
|
|
Contact: linux-input@vger.kernel.org
|
|
Description:
|
|
Writing to this file sets which one of the four (for Intuos 4)
|
|
or of the right four (for Cintiq 21UX2 and Cintiq 24HD) status
|
|
LEDs is active (0..3). The other three LEDs on the same side are
|
|
always inactive.
|
|
|
|
What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status_led1_select
|
|
Date: September 2011
|
|
Contact: linux-input@vger.kernel.org
|
|
Description:
|
|
Writing to this file sets which one of the left four (for Cintiq 21UX2
|
|
and Cintiq 24HD) status LEDs is active (0..3). The other three LEDs on
|
|
the left are always inactive.
|
|
|
|
What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/buttons_luminance
|
|
Date: August 2011
|
|
Contact: linux-input@vger.kernel.org
|
|
Description:
|
|
Writing to this file sets the overall luminance level (0..15)
|
|
of all eight button OLED displays.
|
|
|
|
What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/button<n>_rawimg
|
|
Date: August 2011
|
|
Contact: linux-input@vger.kernel.org
|
|
Description:
|
|
When writing a 1024 byte raw image in Wacom Intuos 4
|
|
interleaving format to the file, the image shows up on Button N
|
|
of the device. The image is a 64x32 pixel 4-bit gray image. The
|
|
1024 byte binary is split up into 16x 64 byte chunks. Each 64
|
|
byte chunk encodes the image data for two consecutive lines on
|
|
the display. The low nibble of each byte contains the first
|
|
line, and the high nibble contains the second line.
|