linux/Documentation/devicetree/bindings/gpio/gpio_lpc32xx.txt

44 lines
980 B
Plaintext

NXP LPC32xx SoC GPIO controller
Required properties:
- compatible: must be "nxp,lpc3220-gpio"
- reg: Physical base address and length of the controller's registers.
- gpio-controller: Marks the device node as a GPIO controller.
- #gpio-cells: Should be 3:
1) bank:
0: GPIO P0
1: GPIO P1
2: GPIO P2
3: GPIO P3
4: GPI P3
5: GPO P3
2) pin number
3) optional parameters:
- bit 0 specifies polarity (0 for normal, 1 for inverted)
- reg: Index of the GPIO group
Example:
gpio: gpio@40028000 {
compatible = "nxp,lpc3220-gpio";
reg = <0x40028000 0x1000>;
gpio-controller;
#gpio-cells = <3>; /* bank, pin, flags */
};
leds {
compatible = "gpio-leds";
led0 {
gpios = <&gpio 5 1 1>; /* GPO_P3 1, active low */
linux,default-trigger = "heartbeat";
default-state = "off";
};
led1 {
gpios = <&gpio 5 14 1>; /* GPO_P3 14, active low */
linux,default-trigger = "timer";
default-state = "off";
};
};