linux/Documentation/devicetree/bindings/gpio/gpio-mm-lantiq.txt

39 lines
1.2 KiB
Plaintext

Lantiq SoC External Bus memory mapped GPIO controller
By attaching hardware latches to the EBU it is possible to create output
only gpios. This driver configures a special memory address, which when
written to outputs 16 bit to the latches.
The node describing the memory mapped GPIOs needs to be a child of the node
describing the "lantiq,localbus".
Required properties:
- compatible : Should be "lantiq,gpio-mm-lantiq"
- reg : Address and length of the register set for the device
- #gpio-cells : Should be two. The first cell is the pin number and
the second cell is used to specify optional parameters (currently
unused).
- gpio-controller : Marks the device node as a gpio controller.
Optional properties:
- lantiq,shadow : The default value that we shall assume as already set on the
shift register cascade.
Example:
localbus@0 {
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
1 0 0x4000000 0x4000010>; /* addsel1 */
compatible = "lantiq,localbus", "simple-bus";
gpio_mm0: gpio@4000000 {
compatible = "lantiq,gpio-mm";
reg = <1 0x0 0x10>;
gpio-controller;
#gpio-cells = <2>;
lantiq,shadow = <0x77f>
};
}