linux/arch/ppc64/kernel/pmac_smp.c
Benjamin Herrenschmidt f10d20c1f1 [PATCH] ppc64: Fix g5 hw timebase sync
The hardware sync of the timebase on SMP G5s uses a black magic
incantation to the i2c clock chip that was inspired from what Darwin
does.

However, this was an earlier version of Darwin that was ...  buggy !
heh.  This causes the latest models to break though when starting SMP,
so it's worth fixing.

Here's a new version of the incantation based on careful transcription
of the said incantations as found in the latest version of apple's
temple.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-23 11:51:24 -07:00

330 lines
8.4 KiB
C

/*
* SMP support for power macintosh.
*
* We support both the old "powersurge" SMP architecture
* and the current Core99 (G4 PowerMac) machines.
*
* Note that we don't support the very first rev. of
* Apple/DayStar 2 CPUs board, the one with the funky
* watchdog. Hopefully, none of these should be there except
* maybe internally to Apple. I should probably still add some
* code to detect this card though and disable SMP. --BenH.
*
* Support Macintosh G4 SMP by Troy Benjegerdes (hozer@drgw.net)
* and Ben Herrenschmidt <benh@kernel.crashing.org>.
*
* Support for DayStar quad CPU cards
* Copyright (C) XLR8, Inc. 1994-2000
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#undef DEBUG
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/smp_lock.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/errno.h>
#include <linux/irq.h>
#include <asm/ptrace.h>
#include <asm/atomic.h>
#include <asm/irq.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/sections.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/smp.h>
#include <asm/machdep.h>
#include <asm/pmac_feature.h>
#include <asm/time.h>
#include <asm/cacheflush.h>
#include <asm/keylargo.h>
#include <asm/pmac_low_i2c.h>
#include "mpic.h"
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
#else
#define DBG(fmt...)
#endif
extern void pmac_secondary_start_1(void);
extern void pmac_secondary_start_2(void);
extern void pmac_secondary_start_3(void);
extern struct smp_ops_t *smp_ops;
static void (*pmac_tb_freeze)(int freeze);
static struct device_node *pmac_tb_clock_chip_host;
static u8 pmac_tb_pulsar_addr;
static DEFINE_SPINLOCK(timebase_lock);
static unsigned long timebase;
static void smp_core99_cypress_tb_freeze(int freeze)
{
u8 data;
int rc;
/* Strangely, the device-tree says address is 0xd2, but darwin
* accesses 0xd0 ...
*/
pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_combined);
rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
0xd0 | pmac_low_i2c_read,
0x81, &data, 1);
if (rc != 0)
goto bail;
data = (data & 0xf3) | (freeze ? 0x00 : 0x0c);
pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_stdsub);
rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
0xd0 | pmac_low_i2c_write,
0x81, &data, 1);
bail:
if (rc != 0) {
printk("Cypress Timebase %s rc: %d\n",
freeze ? "freeze" : "unfreeze", rc);
panic("Timebase freeze failed !\n");
}
}
static void smp_core99_pulsar_tb_freeze(int freeze)
{
u8 data;
int rc;
pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_combined);
rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
pmac_tb_pulsar_addr | pmac_low_i2c_read,
0x2e, &data, 1);
if (rc != 0)
goto bail;
data = (data & 0x88) | (freeze ? 0x11 : 0x22);
pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_stdsub);
rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
pmac_tb_pulsar_addr | pmac_low_i2c_write,
0x2e, &data, 1);
bail:
if (rc != 0) {
printk(KERN_ERR "Pulsar Timebase %s rc: %d\n",
freeze ? "freeze" : "unfreeze", rc);
panic("Timebase freeze failed !\n");
}
}
static void smp_core99_give_timebase(void)
{
/* Open i2c bus for synchronous access */
if (pmac_low_i2c_open(pmac_tb_clock_chip_host, 0))
panic("Can't open i2c for TB sync !\n");
spin_lock(&timebase_lock);
(*pmac_tb_freeze)(1);
mb();
timebase = get_tb();
spin_unlock(&timebase_lock);
while (timebase)
barrier();
spin_lock(&timebase_lock);
(*pmac_tb_freeze)(0);
spin_unlock(&timebase_lock);
/* Close i2c bus */
pmac_low_i2c_close(pmac_tb_clock_chip_host);
}
static void __devinit smp_core99_take_timebase(void)
{
while (!timebase)
barrier();
spin_lock(&timebase_lock);
set_tb(timebase >> 32, timebase & 0xffffffff);
timebase = 0;
spin_unlock(&timebase_lock);
}
static int __init smp_core99_probe(void)
{
struct device_node *cpus;
struct device_node *cc;
int ncpus = 0;
/* Maybe use systemconfiguration here ? */
if (ppc_md.progress) ppc_md.progress("smp_core99_probe", 0x345);
/* Count CPUs in the device-tree */
for (cpus = NULL; (cpus = of_find_node_by_type(cpus, "cpu")) != NULL;)
++ncpus;
printk(KERN_INFO "PowerMac SMP probe found %d cpus\n", ncpus);
/* Nothing more to do if less than 2 of them */
if (ncpus <= 1)
return 1;
/* HW sync only on these platforms */
if (!machine_is_compatible("PowerMac7,2") &&
!machine_is_compatible("PowerMac7,3") &&
!machine_is_compatible("RackMac3,1"))
goto nohwsync;
/* Look for the clock chip */
for (cc = NULL; (cc = of_find_node_by_name(cc, "i2c-hwclock")) != NULL;) {
struct device_node *p = of_get_parent(cc);
u32 *reg;
int ok;
ok = p && device_is_compatible(p, "uni-n-i2c");
if (!ok)
goto next;
reg = (u32 *)get_property(cc, "reg", NULL);
if (reg == NULL)
goto next;
switch (*reg) {
case 0xd2:
if (device_is_compatible(cc, "pulsar-legacy-slewing")) {
pmac_tb_freeze = smp_core99_pulsar_tb_freeze;
pmac_tb_pulsar_addr = 0xd2;
printk(KERN_INFO "Timebase clock is Pulsar chip\n");
} else if (device_is_compatible(cc, "cy28508")) {
pmac_tb_freeze = smp_core99_cypress_tb_freeze;
printk(KERN_INFO "Timebase clock is Cypress chip\n");
}
break;
case 0xd4:
pmac_tb_freeze = smp_core99_pulsar_tb_freeze;
pmac_tb_pulsar_addr = 0xd4;
printk(KERN_INFO "Timebase clock is Pulsar chip\n");
break;
}
if (pmac_tb_freeze != NULL) {
pmac_tb_clock_chip_host = p;
smp_ops->give_timebase = smp_core99_give_timebase;
smp_ops->take_timebase = smp_core99_take_timebase;
of_node_put(cc);
of_node_put(p);
break;
}
next:
of_node_put(p);
}
nohwsync:
mpic_request_ipis();
return ncpus;
}
static void __init smp_core99_kick_cpu(int nr)
{
int save_vector, j;
unsigned long new_vector;
unsigned long flags;
volatile unsigned int *vector
= ((volatile unsigned int *)(KERNELBASE+0x100));
if (nr < 1 || nr > 3)
return;
if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu", 0x346);
local_irq_save(flags);
local_irq_disable();
/* Save reset vector */
save_vector = *vector;
/* Setup fake reset vector that does
* b .pmac_secondary_start - KERNELBASE
*/
switch(nr) {
case 1:
new_vector = (unsigned long)pmac_secondary_start_1;
break;
case 2:
new_vector = (unsigned long)pmac_secondary_start_2;
break;
case 3:
default:
new_vector = (unsigned long)pmac_secondary_start_3;
break;
}
*vector = 0x48000002 + (new_vector - KERNELBASE);
/* flush data cache and inval instruction cache */
flush_icache_range((unsigned long) vector, (unsigned long) vector + 4);
/* Put some life in our friend */
pmac_call_feature(PMAC_FTR_RESET_CPU, NULL, nr, 0);
paca[nr].cpu_start = 1;
/* FIXME: We wait a bit for the CPU to take the exception, I should
* instead wait for the entry code to set something for me. Well,
* ideally, all that crap will be done in prom.c and the CPU left
* in a RAM-based wait loop like CHRP.
*/
for (j = 1; j < 1000000; j++)
mb();
/* Restore our exception vector */
*vector = save_vector;
flush_icache_range((unsigned long) vector, (unsigned long) vector + 4);
local_irq_restore(flags);
if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu done", 0x347);
}
static void __init smp_core99_setup_cpu(int cpu_nr)
{
/* Setup MPIC */
mpic_setup_this_cpu();
if (cpu_nr == 0) {
extern void g5_phy_disable_cpu1(void);
/* If we didn't start the second CPU, we must take
* it off the bus
*/
if (num_online_cpus() < 2)
g5_phy_disable_cpu1();
if (ppc_md.progress) ppc_md.progress("smp_core99_setup_cpu 0 done", 0x349);
}
}
struct smp_ops_t core99_smp_ops __pmacdata = {
.message_pass = smp_mpic_message_pass,
.probe = smp_core99_probe,
.kick_cpu = smp_core99_kick_cpu,
.setup_cpu = smp_core99_setup_cpu,
.give_timebase = smp_generic_give_timebase,
.take_timebase = smp_generic_take_timebase,
};
void __init pmac_setup_smp(void)
{
smp_ops = &core99_smp_ops;
#ifdef CONFIG_HOTPLUG_CPU
smp_ops->cpu_enable = generic_cpu_enable;
smp_ops->cpu_disable = generic_cpu_disable;
smp_ops->cpu_die = generic_cpu_die;
#endif
}