1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
399 lines
12 KiB
Text
399 lines
12 KiB
Text
The Linux Watchdog driver API.
|
|
|
|
Copyright 2002 Christer Weingel <wingel@nano-system.com>
|
|
|
|
Some parts of this document are copied verbatim from the sbc60xxwdt
|
|
driver which is (c) Copyright 2000 Jakob Oestergaard <jakob@ostenfeld.dk>
|
|
|
|
This document describes the state of the Linux 2.4.18 kernel.
|
|
|
|
Introduction:
|
|
|
|
A Watchdog Timer (WDT) is a hardware circuit that can reset the
|
|
computer system in case of a software fault. You probably knew that
|
|
already.
|
|
|
|
Usually a userspace daemon will notify the kernel watchdog driver via the
|
|
/dev/watchdog special device file that userspace is still alive, at
|
|
regular intervals. When such a notification occurs, the driver will
|
|
usually tell the hardware watchdog that everything is in order, and
|
|
that the watchdog should wait for yet another little while to reset
|
|
the system. If userspace fails (RAM error, kernel bug, whatever), the
|
|
notifications cease to occur, and the hardware watchdog will reset the
|
|
system (causing a reboot) after the timeout occurs.
|
|
|
|
The Linux watchdog API is a rather AD hoc construction and different
|
|
drivers implement different, and sometimes incompatible, parts of it.
|
|
This file is an attempt to document the existing usage and allow
|
|
future driver writers to use it as a reference.
|
|
|
|
The simplest API:
|
|
|
|
All drivers support the basic mode of operation, where the watchdog
|
|
activates as soon as /dev/watchdog is opened and will reboot unless
|
|
the watchdog is pinged within a certain time, this time is called the
|
|
timeout or margin. The simplest way to ping the watchdog is to write
|
|
some data to the device. So a very simple watchdog daemon would look
|
|
like this:
|
|
|
|
int main(int argc, const char *argv[]) {
|
|
int fd=open("/dev/watchdog",O_WRONLY);
|
|
if (fd==-1) {
|
|
perror("watchdog");
|
|
exit(1);
|
|
}
|
|
while(1) {
|
|
write(fd, "\0", 1);
|
|
sleep(10);
|
|
}
|
|
}
|
|
|
|
A more advanced driver could for example check that a HTTP server is
|
|
still responding before doing the write call to ping the watchdog.
|
|
|
|
When the device is closed, the watchdog is disabled. This is not
|
|
always such a good idea, since if there is a bug in the watchdog
|
|
daemon and it crashes the system will not reboot. Because of this,
|
|
some of the drivers support the configuration option "Disable watchdog
|
|
shutdown on close", CONFIG_WATCHDOG_NOWAYOUT. If it is set to Y when
|
|
compiling the kernel, there is no way of disabling the watchdog once
|
|
it has been started. So, if the watchdog dameon crashes, the system
|
|
will reboot after the timeout has passed.
|
|
|
|
Some other drivers will not disable the watchdog, unless a specific
|
|
magic character 'V' has been sent /dev/watchdog just before closing
|
|
the file. If the userspace daemon closes the file without sending
|
|
this special character, the driver will assume that the daemon (and
|
|
userspace in general) died, and will stop pinging the watchdog without
|
|
disabling it first. This will then cause a reboot.
|
|
|
|
The ioctl API:
|
|
|
|
All conforming drivers also support an ioctl API.
|
|
|
|
Pinging the watchdog using an ioctl:
|
|
|
|
All drivers that have an ioctl interface support at least one ioctl,
|
|
KEEPALIVE. This ioctl does exactly the same thing as a write to the
|
|
watchdog device, so the main loop in the above program could be
|
|
replaced with:
|
|
|
|
while (1) {
|
|
ioctl(fd, WDIOC_KEEPALIVE, 0);
|
|
sleep(10);
|
|
}
|
|
|
|
the argument to the ioctl is ignored.
|
|
|
|
Setting and getting the timeout:
|
|
|
|
For some drivers it is possible to modify the watchdog timeout on the
|
|
fly with the SETTIMEOUT ioctl, those drivers have the WDIOF_SETTIMEOUT
|
|
flag set in their option field. The argument is an integer
|
|
representing the timeout in seconds. The driver returns the real
|
|
timeout used in the same variable, and this timeout might differ from
|
|
the requested one due to limitation of the hardware.
|
|
|
|
int timeout = 45;
|
|
ioctl(fd, WDIOC_SETTIMEOUT, &timeout);
|
|
printf("The timeout was set to %d seconds\n", timeout);
|
|
|
|
This example might actually print "The timeout was set to 60 seconds"
|
|
if the device has a granularity of minutes for its timeout.
|
|
|
|
Starting with the Linux 2.4.18 kernel, it is possible to query the
|
|
current timeout using the GETTIMEOUT ioctl.
|
|
|
|
ioctl(fd, WDIOC_GETTIMEOUT, &timeout);
|
|
printf("The timeout was is %d seconds\n", timeout);
|
|
|
|
Envinronmental monitoring:
|
|
|
|
All watchdog drivers are required return more information about the system,
|
|
some do temperature, fan and power level monitoring, some can tell you
|
|
the reason for the last reboot of the system. The GETSUPPORT ioctl is
|
|
available to ask what the device can do:
|
|
|
|
struct watchdog_info ident;
|
|
ioctl(fd, WDIOC_GETSUPPORT, &ident);
|
|
|
|
the fields returned in the ident struct are:
|
|
|
|
identity a string identifying the watchdog driver
|
|
firmware_version the firmware version of the card if available
|
|
options a flags describing what the device supports
|
|
|
|
the options field can have the following bits set, and describes what
|
|
kind of information that the GET_STATUS and GET_BOOT_STATUS ioctls can
|
|
return. [FIXME -- Is this correct?]
|
|
|
|
WDIOF_OVERHEAT Reset due to CPU overheat
|
|
|
|
The machine was last rebooted by the watchdog because the thermal limit was
|
|
exceeded
|
|
|
|
WDIOF_FANFAULT Fan failed
|
|
|
|
A system fan monitored by the watchdog card has failed
|
|
|
|
WDIOF_EXTERN1 External relay 1
|
|
|
|
External monitoring relay/source 1 was triggered. Controllers intended for
|
|
real world applications include external monitoring pins that will trigger
|
|
a reset.
|
|
|
|
WDIOF_EXTERN2 External relay 2
|
|
|
|
External monitoring relay/source 2 was triggered
|
|
|
|
WDIOF_POWERUNDER Power bad/power fault
|
|
|
|
The machine is showing an undervoltage status
|
|
|
|
WDIOF_CARDRESET Card previously reset the CPU
|
|
|
|
The last reboot was caused by the watchdog card
|
|
|
|
WDIOF_POWEROVER Power over voltage
|
|
|
|
The machine is showing an overvoltage status. Note that if one level is
|
|
under and one over both bits will be set - this may seem odd but makes
|
|
sense.
|
|
|
|
WDIOF_KEEPALIVEPING Keep alive ping reply
|
|
|
|
The watchdog saw a keepalive ping since it was last queried.
|
|
|
|
WDIOF_SETTIMEOUT Can set/get the timeout
|
|
|
|
|
|
For those drivers that return any bits set in the option field, the
|
|
GETSTATUS and GETBOOTSTATUS ioctls can be used to ask for the current
|
|
status, and the status at the last reboot, respectively.
|
|
|
|
int flags;
|
|
ioctl(fd, WDIOC_GETSTATUS, &flags);
|
|
|
|
or
|
|
|
|
ioctl(fd, WDIOC_GETBOOTSTATUS, &flags);
|
|
|
|
Note that not all devices support these two calls, and some only
|
|
support the GETBOOTSTATUS call.
|
|
|
|
Some drivers can measure the temperature using the GETTEMP ioctl. The
|
|
returned value is the temperature in degrees farenheit.
|
|
|
|
int temperature;
|
|
ioctl(fd, WDIOC_GETTEMP, &temperature);
|
|
|
|
Finally the SETOPTIONS ioctl can be used to control some aspects of
|
|
the cards operation; right now the pcwd driver is the only one
|
|
supporting thiss ioctl.
|
|
|
|
int options = 0;
|
|
ioctl(fd, WDIOC_SETOPTIONS, options);
|
|
|
|
The following options are available:
|
|
|
|
WDIOS_DISABLECARD Turn off the watchdog timer
|
|
WDIOS_ENABLECARD Turn on the watchdog timer
|
|
WDIOS_TEMPPANIC Kernel panic on temperature trip
|
|
|
|
[FIXME -- better explanations]
|
|
|
|
Implementations in the current drivers in the kernel tree:
|
|
|
|
Here I have tried to summarize what the different drivers support and
|
|
where they do strange things compared to the other drivers.
|
|
|
|
acquirewdt.c -- Acquire Single Board Computer
|
|
|
|
This driver has a hardcoded timeout of 1 minute
|
|
|
|
Supports CONFIG_WATCHDOG_NOWAYOUT
|
|
|
|
GETSUPPORT returns KEEPALIVEPING. GETSTATUS will return 1 if
|
|
the device is open, 0 if not. [FIXME -- isn't this rather
|
|
silly? To be able to use the ioctl, the device must be open
|
|
and so GETSTATUS will always return 1].
|
|
|
|
advantechwdt.c -- Advantech Single Board Computer
|
|
|
|
Timeout that defaults to 60 seconds, supports SETTIMEOUT.
|
|
|
|
Supports CONFIG_WATCHDOG_NOWAYOUT
|
|
|
|
GETSUPPORT returns WDIOF_KEEPALIVEPING and WDIOF_SETTIMEOUT.
|
|
The GETSTATUS call returns if the device is open or not.
|
|
[FIXME -- silliness again?]
|
|
|
|
eurotechwdt.c -- Eurotech CPU-1220/1410
|
|
|
|
The timeout can be set using the SETTIMEOUT ioctl and defaults
|
|
to 60 seconds.
|
|
|
|
Also has a module parameter "ev", event type which controls
|
|
what should happen on a timeout, the string "int" or anything
|
|
else that causes a reboot. [FIXME -- better description]
|
|
|
|
Supports CONFIG_WATCHDOG_NOWAYOUT
|
|
|
|
GETSUPPORT returns CARDRESET and WDIOF_SETTIMEOUT but
|
|
GETSTATUS is not supported and GETBOOTSTATUS just returns 0.
|
|
|
|
i810-tco.c -- Intel 810 chipset
|
|
|
|
Also has support for a lot of other i8x0 stuff, but the
|
|
watchdog is one of the things.
|
|
|
|
The timeout is set using the module parameter "i810_margin",
|
|
which is in steps of 0.6 seconds where 2<i810_margin<64. The
|
|
driver supports the SETTIMEOUT ioctl.
|
|
|
|
Supports CONFIG_WATCHDOG_NOWAYOUT.
|
|
|
|
GETSUPPORT returns WDIOF_SETTIMEOUT. The GETSTATUS call
|
|
returns some kind of timer value which ist not compatible with
|
|
the other drivers. GETBOOT status returns some kind of
|
|
hardware specific boot status. [FIXME -- describe this]
|
|
|
|
ib700wdt.c -- IB700 Single Board Computer
|
|
|
|
Default timeout of 30 seconds and the timeout is settable
|
|
using the SETTIMEOUT ioctl. Note that only a few timeout
|
|
values are supported.
|
|
|
|
Supports CONFIG_WATCHDOG_NOWAYOUT
|
|
|
|
GETSUPPORT returns WDIOF_KEEPALIVEPING and WDIOF_SETTIMEOUT.
|
|
The GETSTATUS call returns if the device is open or not.
|
|
[FIXME -- silliness again?]
|
|
|
|
machzwd.c -- MachZ ZF-Logic
|
|
|
|
Hardcoded timeout of 10 seconds
|
|
|
|
Has a module parameter "action" that controls what happens
|
|
when the timeout runs out which can be 0 = RESET (default),
|
|
1 = SMI, 2 = NMI, 3 = SCI.
|
|
|
|
Supports CONFIG_WATCHDOG_NOWAYOUT and the magic character
|
|
'V' close handling.
|
|
|
|
GETSUPPORT returns WDIOF_KEEPALIVEPING, and the GETSTATUS call
|
|
returns if the device is open or not. [FIXME -- silliness
|
|
again?]
|
|
|
|
mixcomwd.c -- MixCom Watchdog
|
|
|
|
[FIXME -- I'm unable to tell what the timeout is]
|
|
|
|
Supports CONFIG_WATCHDOG_NOWAYOUT
|
|
|
|
GETSUPPORT returns WDIOF_KEEPALIVEPING, GETSTATUS returns if
|
|
the device is opened or not [FIXME -- I'm not really sure how
|
|
this works, there seems to be some magic connected to
|
|
CONFIG_WATCHDOG_NOWAYOUT]
|
|
|
|
pcwd.c -- Berkshire PC Watchdog
|
|
|
|
Hardcoded timeout of 1.5 seconds
|
|
|
|
Supports CONFIG_WATCHDOG_NOWAYOUT
|
|
|
|
GETSUPPORT returns WDIOF_OVERHEAT|WDIOF_CARDRESET and both
|
|
GETSTATUS and GETBOOTSTATUS return something useful.
|
|
|
|
The SETOPTIONS call can be used to enable and disable the card
|
|
and to ask the driver to call panic if the system overheats.
|
|
|
|
sbc60xxwdt.c -- 60xx Single Board Computer
|
|
|
|
Hardcoded timeout of 10 seconds
|
|
|
|
Does not support CONFIG_WATCHDOG_NOWAYOUT, but has the magic
|
|
character 'V' close handling.
|
|
|
|
No bits set in GETSUPPORT
|
|
|
|
scx200.c -- National SCx200 CPUs
|
|
|
|
Not in the kernel yet.
|
|
|
|
The timeout is set using a module parameter "margin" which
|
|
defaults to 60 seconds. The timeout can also be set using
|
|
SETTIMEOUT and read using GETTIMEOUT.
|
|
|
|
Supports a module parameter "nowayout" that is initialized
|
|
with the value of CONFIG_WATCHDOG_NOWAYOUT. Also supports the
|
|
magic character 'V' handling.
|
|
|
|
shwdt.c -- SuperH 3/4 processors
|
|
|
|
[FIXME -- I'm unable to tell what the timeout is]
|
|
|
|
Supports CONFIG_WATCHDOG_NOWAYOUT
|
|
|
|
GETSUPPORT returns WDIOF_KEEPALIVEPING, and the GETSTATUS call
|
|
returns if the device is open or not. [FIXME -- silliness
|
|
again?]
|
|
|
|
softdog.c -- Software watchdog
|
|
|
|
The timeout is set with the module parameter "soft_margin"
|
|
which defaults to 60 seconds, the timeout is also settable
|
|
using the SETTIMEOUT ioctl.
|
|
|
|
Supports CONFIG_WATCHDOG_NOWAYOUT
|
|
|
|
WDIOF_SETTIMEOUT bit set in GETSUPPORT
|
|
|
|
w83877f_wdt.c -- W83877F Computer
|
|
|
|
Hardcoded timeout of 30 seconds
|
|
|
|
Does not support CONFIG_WATCHDOG_NOWAYOUT, but has the magic
|
|
character 'V' close handling.
|
|
|
|
No bits set in GETSUPPORT
|
|
|
|
w83627hf_wdt.c -- w83627hf watchdog
|
|
|
|
Timeout that defaults to 60 seconds, supports SETTIMEOUT.
|
|
|
|
Supports CONFIG_WATCHDOG_NOWAYOUT
|
|
|
|
GETSUPPORT returns WDIOF_KEEPALIVEPING and WDIOF_SETTIMEOUT.
|
|
The GETSTATUS call returns if the device is open or not.
|
|
|
|
wdt.c -- ICS WDT500/501 ISA and
|
|
wdt_pci.c -- ICS WDT500/501 PCI
|
|
|
|
Default timeout of 60 seconds. The timeout is also settable
|
|
using the SETTIMEOUT ioctl.
|
|
|
|
Supports CONFIG_WATCHDOG_NOWAYOUT
|
|
|
|
GETSUPPORT returns with bits set depending on the actual
|
|
card. The WDT501 supports a lot of external monitoring, the
|
|
WDT500 much less.
|
|
|
|
wdt285.c -- Footbridge watchdog
|
|
|
|
The timeout is set with the module parameter "soft_margin"
|
|
which defaults to 60 seconds. The timeout is also settable
|
|
using the SETTIMEOUT ioctl.
|
|
|
|
Does not support CONFIG_WATCHDOG_NOWAYOUT
|
|
|
|
WDIOF_SETTIMEOUT bit set in GETSUPPORT
|
|
|
|
wdt977.c -- Netwinder W83977AF chip
|
|
|
|
Hardcoded timeout of 3 minutes
|
|
|
|
Supports CONFIG_WATCHDOG_NOWAYOUT
|
|
|
|
Does not support any ioctls at all.
|
|
|