1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
365 lines
8.7 KiB
C
365 lines
8.7 KiB
C
/*
|
|
* arch/m68k/q40/config.c
|
|
*
|
|
* Copyright (C) 1999 Richard Zidlicky
|
|
*
|
|
* originally based on:
|
|
*
|
|
* linux/bvme/config.c
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file README.legal in the main directory of this archive
|
|
* for more details.
|
|
*/
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/console.h>
|
|
#include <linux/linkage.h>
|
|
#include <linux/init.h>
|
|
#include <linux/major.h>
|
|
#include <linux/serial_reg.h>
|
|
#include <linux/rtc.h>
|
|
#include <linux/vt_kern.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/rtc.h>
|
|
#include <asm/bootinfo.h>
|
|
#include <asm/system.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/setup.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/traps.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/q40_master.h>
|
|
|
|
extern void floppy_setup(char *str, int *ints);
|
|
|
|
extern irqreturn_t q40_process_int (int level, struct pt_regs *regs);
|
|
extern irqreturn_t (*q40_default_handler[]) (int, void *, struct pt_regs *); /* added just for debugging */
|
|
extern void q40_init_IRQ (void);
|
|
extern void q40_free_irq (unsigned int, void *);
|
|
extern int show_q40_interrupts (struct seq_file *, void *);
|
|
extern void q40_enable_irq (unsigned int);
|
|
extern void q40_disable_irq (unsigned int);
|
|
static void q40_get_model(char *model);
|
|
static int q40_get_hardware_list(char *buffer);
|
|
extern int q40_request_irq(unsigned int irq, irqreturn_t (*handler)(int, void *, struct pt_regs *), unsigned long flags, const char *devname, void *dev_id);
|
|
extern void q40_sched_init(irqreturn_t (*handler)(int, void *, struct pt_regs *));
|
|
|
|
extern unsigned long q40_gettimeoffset (void);
|
|
extern int q40_hwclk (int, struct rtc_time *);
|
|
extern unsigned int q40_get_ss (void);
|
|
extern int q40_set_clock_mmss (unsigned long);
|
|
static int q40_get_rtc_pll(struct rtc_pll_info *pll);
|
|
static int q40_set_rtc_pll(struct rtc_pll_info *pll);
|
|
extern void q40_reset (void);
|
|
void q40_halt(void);
|
|
extern void q40_waitbut(void);
|
|
void q40_set_vectors (void);
|
|
|
|
extern void q40_mksound(unsigned int /*freq*/, unsigned int /*ticks*/ );
|
|
|
|
extern char m68k_debug_device[];
|
|
static void q40_mem_console_write(struct console *co, const char *b,
|
|
unsigned int count);
|
|
|
|
extern int ql_ticks;
|
|
|
|
static struct console q40_console_driver = {
|
|
.name = "debug",
|
|
.flags = CON_PRINTBUFFER,
|
|
.index = -1,
|
|
};
|
|
|
|
|
|
/* early debugging function:*/
|
|
extern char *q40_mem_cptr; /*=(char *)0xff020000;*/
|
|
static int _cpleft;
|
|
|
|
static void q40_mem_console_write(struct console *co, const char *s,
|
|
unsigned int count)
|
|
{
|
|
char *p=(char *)s;
|
|
|
|
if (count<_cpleft)
|
|
while (count-- >0){
|
|
*q40_mem_cptr=*p++;
|
|
q40_mem_cptr+=4;
|
|
_cpleft--;
|
|
}
|
|
}
|
|
#if 0
|
|
void printq40(char *str)
|
|
{
|
|
int l=strlen(str);
|
|
char *p=q40_mem_cptr;
|
|
|
|
while (l-- >0 && _cpleft-- >0)
|
|
{
|
|
*p=*str++;
|
|
p+=4;
|
|
}
|
|
q40_mem_cptr=p;
|
|
}
|
|
#endif
|
|
|
|
static int halted=0;
|
|
|
|
#ifdef CONFIG_HEARTBEAT
|
|
static void q40_heartbeat(int on)
|
|
{
|
|
if (halted) return;
|
|
|
|
if (on)
|
|
Q40_LED_ON();
|
|
else
|
|
Q40_LED_OFF();
|
|
}
|
|
#endif
|
|
|
|
void q40_reset(void)
|
|
{
|
|
halted=1;
|
|
printk ("\n\n*******************************************\n"
|
|
"Called q40_reset : press the RESET button!! \n"
|
|
"*******************************************\n");
|
|
Q40_LED_ON();
|
|
while(1) ;
|
|
}
|
|
void q40_halt(void)
|
|
{
|
|
halted=1;
|
|
printk ("\n\n*******************\n"
|
|
" Called q40_halt\n"
|
|
"*******************\n");
|
|
Q40_LED_ON();
|
|
while(1) ;
|
|
}
|
|
|
|
static void q40_get_model(char *model)
|
|
{
|
|
sprintf(model, "Q40");
|
|
}
|
|
|
|
/* No hardware options on Q40? */
|
|
|
|
static int q40_get_hardware_list(char *buffer)
|
|
{
|
|
*buffer = '\0';
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int serports[]={0x3f8,0x2f8,0x3e8,0x2e8,0};
|
|
void q40_disable_irqs(void)
|
|
{
|
|
unsigned i,j;
|
|
|
|
j=0;
|
|
while((i=serports[j++])) outb(0,i+UART_IER);
|
|
master_outb(0,EXT_ENABLE_REG);
|
|
master_outb(0,KEY_IRQ_ENABLE_REG);
|
|
}
|
|
|
|
void __init config_q40(void)
|
|
{
|
|
mach_sched_init = q40_sched_init;
|
|
|
|
mach_init_IRQ = q40_init_IRQ;
|
|
mach_gettimeoffset = q40_gettimeoffset;
|
|
mach_hwclk = q40_hwclk;
|
|
mach_get_ss = q40_get_ss;
|
|
mach_get_rtc_pll = q40_get_rtc_pll;
|
|
mach_set_rtc_pll = q40_set_rtc_pll;
|
|
mach_set_clock_mmss = q40_set_clock_mmss;
|
|
|
|
mach_reset = q40_reset;
|
|
mach_free_irq = q40_free_irq;
|
|
mach_process_int = q40_process_int;
|
|
mach_get_irq_list = show_q40_interrupts;
|
|
mach_request_irq = q40_request_irq;
|
|
enable_irq = q40_enable_irq;
|
|
disable_irq = q40_disable_irq;
|
|
mach_default_handler = &q40_default_handler;
|
|
mach_get_model = q40_get_model;
|
|
mach_get_hardware_list = q40_get_hardware_list;
|
|
|
|
#if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
|
|
mach_beep = q40_mksound;
|
|
#endif
|
|
#ifdef CONFIG_HEARTBEAT
|
|
mach_heartbeat = q40_heartbeat;
|
|
#endif
|
|
mach_halt = q40_halt;
|
|
#ifdef CONFIG_DUMMY_CONSOLE
|
|
conswitchp = &dummy_con;
|
|
#endif
|
|
|
|
/* disable a few things that SMSQ might have left enabled */
|
|
q40_disable_irqs();
|
|
|
|
/* no DMA at all, but ide-scsi requires it.. make sure
|
|
* all physical RAM fits into the boundary - otherwise
|
|
* allocator may play costly and useless tricks */
|
|
mach_max_dma_address = 1024*1024*1024;
|
|
|
|
/* useful for early debugging stages - writes kernel messages into SRAM */
|
|
if (!strncmp( m68k_debug_device,"mem",3 ))
|
|
{
|
|
/*printk("using NVRAM debug, q40_mem_cptr=%p\n",q40_mem_cptr);*/
|
|
_cpleft=2000-((long)q40_mem_cptr-0xff020000)/4;
|
|
q40_console_driver.write = q40_mem_console_write;
|
|
register_console(&q40_console_driver);
|
|
}
|
|
}
|
|
|
|
|
|
int q40_parse_bootinfo(const struct bi_record *rec)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
|
|
static inline unsigned char bcd2bin (unsigned char b)
|
|
{
|
|
return ((b>>4)*10 + (b&15));
|
|
}
|
|
|
|
static inline unsigned char bin2bcd (unsigned char b)
|
|
{
|
|
return (((b/10)*16) + (b%10));
|
|
}
|
|
|
|
|
|
unsigned long q40_gettimeoffset (void)
|
|
{
|
|
return 5000*(ql_ticks!=0);
|
|
}
|
|
|
|
|
|
/*
|
|
* Looks like op is non-zero for setting the clock, and zero for
|
|
* reading the clock.
|
|
*
|
|
* struct hwclk_time {
|
|
* unsigned sec; 0..59
|
|
* unsigned min; 0..59
|
|
* unsigned hour; 0..23
|
|
* unsigned day; 1..31
|
|
* unsigned mon; 0..11
|
|
* unsigned year; 00...
|
|
* int wday; 0..6, 0 is Sunday, -1 means unknown/don't set
|
|
* };
|
|
*/
|
|
|
|
int q40_hwclk(int op, struct rtc_time *t)
|
|
{
|
|
if (op)
|
|
{ /* Write.... */
|
|
Q40_RTC_CTRL |= Q40_RTC_WRITE;
|
|
|
|
Q40_RTC_SECS = bin2bcd(t->tm_sec);
|
|
Q40_RTC_MINS = bin2bcd(t->tm_min);
|
|
Q40_RTC_HOUR = bin2bcd(t->tm_hour);
|
|
Q40_RTC_DATE = bin2bcd(t->tm_mday);
|
|
Q40_RTC_MNTH = bin2bcd(t->tm_mon + 1);
|
|
Q40_RTC_YEAR = bin2bcd(t->tm_year%100);
|
|
if (t->tm_wday >= 0)
|
|
Q40_RTC_DOW = bin2bcd(t->tm_wday+1);
|
|
|
|
Q40_RTC_CTRL &= ~(Q40_RTC_WRITE);
|
|
}
|
|
else
|
|
{ /* Read.... */
|
|
Q40_RTC_CTRL |= Q40_RTC_READ;
|
|
|
|
t->tm_year = bcd2bin (Q40_RTC_YEAR);
|
|
t->tm_mon = bcd2bin (Q40_RTC_MNTH)-1;
|
|
t->tm_mday = bcd2bin (Q40_RTC_DATE);
|
|
t->tm_hour = bcd2bin (Q40_RTC_HOUR);
|
|
t->tm_min = bcd2bin (Q40_RTC_MINS);
|
|
t->tm_sec = bcd2bin (Q40_RTC_SECS);
|
|
|
|
Q40_RTC_CTRL &= ~(Q40_RTC_READ);
|
|
|
|
if (t->tm_year < 70)
|
|
t->tm_year += 100;
|
|
t->tm_wday = bcd2bin(Q40_RTC_DOW)-1;
|
|
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
unsigned int q40_get_ss(void)
|
|
{
|
|
return bcd2bin(Q40_RTC_SECS);
|
|
}
|
|
|
|
/*
|
|
* Set the minutes and seconds from seconds value 'nowtime'. Fail if
|
|
* clock is out by > 30 minutes. Logic lifted from atari code.
|
|
*/
|
|
|
|
int q40_set_clock_mmss (unsigned long nowtime)
|
|
{
|
|
int retval = 0;
|
|
short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
|
|
|
|
int rtc_minutes;
|
|
|
|
|
|
rtc_minutes = bcd2bin (Q40_RTC_MINS);
|
|
|
|
if ((rtc_minutes < real_minutes
|
|
? real_minutes - rtc_minutes
|
|
: rtc_minutes - real_minutes) < 30)
|
|
{
|
|
Q40_RTC_CTRL |= Q40_RTC_WRITE;
|
|
Q40_RTC_MINS = bin2bcd(real_minutes);
|
|
Q40_RTC_SECS = bin2bcd(real_seconds);
|
|
Q40_RTC_CTRL &= ~(Q40_RTC_WRITE);
|
|
}
|
|
else
|
|
retval = -1;
|
|
|
|
|
|
return retval;
|
|
}
|
|
|
|
|
|
/* get and set PLL calibration of RTC clock */
|
|
#define Q40_RTC_PLL_MASK ((1<<5)-1)
|
|
#define Q40_RTC_PLL_SIGN (1<<5)
|
|
|
|
static int q40_get_rtc_pll(struct rtc_pll_info *pll)
|
|
{
|
|
int tmp=Q40_RTC_CTRL;
|
|
pll->pll_value = tmp & Q40_RTC_PLL_MASK;
|
|
if (tmp & Q40_RTC_PLL_SIGN)
|
|
pll->pll_value = -pll->pll_value;
|
|
pll->pll_max=31;
|
|
pll->pll_min=-31;
|
|
pll->pll_posmult=512;
|
|
pll->pll_negmult=256;
|
|
pll->pll_clock=125829120;
|
|
return 0;
|
|
}
|
|
|
|
static int q40_set_rtc_pll(struct rtc_pll_info *pll)
|
|
{
|
|
if (!pll->pll_ctrl){
|
|
/* the docs are a bit unclear so I am doublesetting */
|
|
/* RTC_WRITE here ... */
|
|
int tmp = (pll->pll_value & 31) | (pll->pll_value<0 ? 32 : 0) |
|
|
Q40_RTC_WRITE;
|
|
Q40_RTC_CTRL |= Q40_RTC_WRITE;
|
|
Q40_RTC_CTRL = tmp;
|
|
Q40_RTC_CTRL &= ~(Q40_RTC_WRITE);
|
|
return 0;
|
|
} else
|
|
return -EINVAL;
|
|
}
|