q3k
/
linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
linux/drivers/net/wireless/ath/ath9k
History
Felix Fietkau 0bda652300 ath9k: remove the noise floor value in the ani struct 
common->ani.noise_floor is now only used for a similar redundant debug
message similar to the one that was removed from ath9k_htc in an earlier
patch. Remove it from ath9k as well now.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
 		2010-10-05 13:35:22 -04:00
..
Kconfig ath9k: make the driver specific rate control module optional 2010-09-21 11:05:35 -04:00
Makefile ath9k: make the driver specific rate control module optional 2010-09-21 11:05:35 -04:00
ahb.c drivers/net/wireless: Use wiphy_<level> 2010-07-27 15:14:13 -04:00
ani.c drivers/net/wireless/ath/ath9k: use ARRAY_SIZE macro in ani.c 2010-09-14 16:05:57 -04:00
ani.h
…
ar5008_initvals.h ath9k_hw: reformat the ar5008, ar9001 and ar9002 initvals to match ar9003 2010-07-02 13:44:34 -04:00
ar5008_phy.c ath9k_hw: simplify revision checks for AR9287 2010-09-27 15:57:42 -04:00
ar9001_initvals.h ath9k_hw: sync initvals for ar9001 and ar9002 with Atheros 2010-07-02 13:44:35 -04:00
ar9002_calib.c ath9k_hw: simplify revision checks for AR9287 2010-09-27 15:57:42 -04:00
ar9002_hw.c ath9k_hw: simplify revision checks for AR9280 2010-09-27 15:57:39 -04:00
ar9002_initvals.h ath9k_hw: remove initvals for hardware which was never sold 2010-07-14 13:52:46 -04:00
ar9002_mac.c ath9k_hw: report the TID in the tx status on AR5008-AR9002 2010-07-12 16:05:38 -04:00
ar9002_phy.c ath9k_hw: Add functions to get/set antenna diversity configuration 2010-09-07 13:54:33 -04:00
ar9002_phy.h ath9k_hw: Add functions to get/set antenna diversity configuration 2010-09-07 13:54:33 -04:00
ar9003_2p0_initvals.h
…
ar9003_2p2_initvals.h
…
ar9003_calib.c ath9k_hw: clean up per-channel calibration data 2010-08-04 15:27:37 -04:00
ar9003_eeprom.c Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 2010-09-24 15:52:34 -04:00
ar9003_eeprom.h ath9k_hw: add support for parsing PA predistortion related EEPROM fields 2010-06-14 15:39:32 -04:00
ar9003_hw.c ath9k_hw: dynamically choose the SERDES array for low power 2010-06-23 15:14:03 -04:00
ar9003_mac.c ath9k_hw: handle rx key miss 2010-09-14 16:14:27 -04:00
ar9003_mac.h ath9k_hw: report the TID in the tx status on AR5008-AR9002 2010-07-12 16:05:38 -04:00
ar9003_paprd.c ath9k_hw: clean up per-channel calibration data 2010-08-04 15:27:37 -04:00
ar9003_phy.c ath9k_hw: fix analog shift register writes on AR9003 2010-08-04 15:27:37 -04:00
ar9003_phy.h ath9k_hw: add register definitions related to PA predistortion 2010-06-14 15:39:32 -04:00
ath9k.h ath9k: move ath_tx_aggr_check() to the rate control module 2010-09-21 11:05:34 -04:00
beacon.c ath9k: use AP beacon miss as a trigger for fast recalibration 2010-08-16 15:26:39 -04:00
btcoex.c ath9k_htc: Add support for bluetooth coexistence. 2010-08-24 16:32:05 -04:00
btcoex.h
…
calib.c ath9k_hw: keep calibrated noise floor values per channel 2010-10-05 13:35:21 -04:00
calib.h ath9k: use AP beacon miss as a trigger for fast recalibration 2010-08-16 15:26:39 -04:00
common.c ath9k: Use common ath key management functions 2010-09-16 15:22:10 -04:00
common.h ath9k: Use common ath key management functions 2010-09-16 15:22:10 -04:00
debug.c ath9k: Print rxfilter in debugfs. 2010-09-16 15:45:50 -04:00
debug.h
…
eeprom.c
…
eeprom.h ath9k_hw: simplify revision checks for AR9287 2010-09-27 15:57:42 -04:00
eeprom_4k.c ath9k_hw: simplify revision checks for AR9285 2010-09-27 15:57:41 -04:00
eeprom_9287.c ath9k_hw: simplify revision checks for AR9280 2010-09-27 15:57:39 -04:00
eeprom_def.c ath9k_hw: simplify revision checks for AR9280 2010-09-27 15:57:39 -04:00
gpio.c ath9k_common: Move bt_stomp to common for sharing with ath9k_htc. 2010-08-24 16:32:05 -04:00
hif_usb.c ath9k_htc: Fix register read through bulk pipe 2010-09-16 15:46:08 -04:00
hif_usb.h
…
htc.h ath9k_htc: Add support for bluetooth coexistence. 2010-08-24 16:32:05 -04:00
htc_drv_beacon.c ath9k_htc: Fix beacon distribution in IBSS mode 2010-09-24 15:54:32 -04:00
htc_drv_gpio.c ath9k_htc: Add support for bluetooth coexistence. 2010-08-24 16:32:05 -04:00
htc_drv_init.c ath9k_htc: Fix TKIP disconnect failure with HTC drivers 2010-09-27 15:57:56 -04:00
htc_drv_main.c ath9k_htc: remove use of common->ani.noise_floor 2010-10-05 13:35:21 -04:00
htc_drv_txrx.c ath9k_hw: remove useless hw capability flags 2010-09-14 16:14:27 -04:00
htc_hst.c ath9k_htc: Add support for bluetooth coexistence. 2010-08-24 16:32:05 -04:00
htc_hst.h ath9k_htc: Add support for bluetooth coexistence. 2010-08-24 16:32:05 -04:00
hw-ops.h ath9k: merge noisefloor load implementations 2010-07-12 16:05:39 -04:00
hw.c ath9k_hw: keep calibrated noise floor values per channel 2010-10-05 13:35:21 -04:00
hw.h ath9k_hw: keep calibrated noise floor values per channel 2010-10-05 13:35:21 -04:00
init.c ath9k: remove the noise floor value in the ani struct 2010-10-05 13:35:22 -04:00
mac.c ath9k_hw: handle rx key miss 2010-09-14 16:14:27 -04:00
mac.h ath9k: Use common ath key management functions 2010-09-16 15:22:10 -04:00
main.c ath9k: remove the noise floor value in the ani struct 2010-10-05 13:35:22 -04:00
pci.c drivers/net/wireless: Use wiphy_<level> 2010-07-27 15:14:13 -04:00
phy.h ath9k: Use common ath key management functions 2010-09-16 15:22:10 -04:00
rc.c ath9k: move ath_tx_aggr_check() to the rate control module 2010-09-21 11:05:34 -04:00
rc.h ath9k: make the driver specific rate control module optional 2010-09-21 11:05:35 -04:00
recv.c mac80211/ath9k: Support AMPDU with multiple VIFs. 2010-09-27 15:57:45 -04:00
reg.h ath9k_hw: simplify revision checks for AR9287 2010-09-27 15:57:42 -04:00
virtual.c ath9k: fix BSSID mask calculation 2010-09-14 16:14:26 -04:00
wmi.c ath9k_htc: Fix memory leak on WMI event handler 2010-09-14 16:14:26 -04:00
wmi.h ath9k_htc: Fix memory leak on WMI event handler 2010-09-14 16:14:26 -04:00
xmit.c mac80211/ath9k: Support AMPDU with multiple VIFs. 2010-09-27 15:57:45 -04:00