bfe0658b40
Several UDC drivers had a gadget driver's speed sanity check of the form of: driver->speed != USB_SPEED_HIGH or: driver->speed != USB_SPEED_HIGH && driver->speed != USB_SPEED_FULL As more and more gadget drivers support USB SuperSpeed, driver->speed may be set to USB_SPEED_SUPER and UDC driver should handle such gadget correctly. The above checks however fail to recognise USB_SPEED_SUPER as a valid speed. This commit changes the two checks to: driver->speed < USB_SPEED_HIGH or: driver->speed < USB_SPEED_FULL respectively. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Reported-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
3486 lines
90 KiB
C
3486 lines
90 KiB
C
/* linux/drivers/usb/gadget/s3c-hsotg.c
|
|
*
|
|
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
*
|
|
* Copyright 2008 Openmoko, Inc.
|
|
* Copyright 2008 Simtec Electronics
|
|
* Ben Dooks <ben@simtec.co.uk>
|
|
* http://armlinux.simtec.co.uk/
|
|
*
|
|
* S3C USB2.0 High-speed / OtG driver
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/clk.h>
|
|
|
|
#include <linux/usb/ch9.h>
|
|
#include <linux/usb/gadget.h>
|
|
|
|
#include <mach/map.h>
|
|
|
|
#include <plat/regs-usb-hsotg-phy.h>
|
|
#include <plat/regs-usb-hsotg.h>
|
|
#include <mach/regs-sys.h>
|
|
#include <plat/udc-hs.h>
|
|
#include <plat/cpu.h>
|
|
|
|
#define DMA_ADDR_INVALID (~((dma_addr_t)0))
|
|
|
|
/* EP0_MPS_LIMIT
|
|
*
|
|
* Unfortunately there seems to be a limit of the amount of data that can
|
|
* be transferred by IN transactions on EP0. This is either 127 bytes or 3
|
|
* packets (which practically means 1 packet and 63 bytes of data) when the
|
|
* MPS is set to 64.
|
|
*
|
|
* This means if we are wanting to move >127 bytes of data, we need to
|
|
* split the transactions up, but just doing one packet at a time does
|
|
* not work (this may be an implicit DATA0 PID on first packet of the
|
|
* transaction) and doing 2 packets is outside the controller's limits.
|
|
*
|
|
* If we try to lower the MPS size for EP0, then no transfers work properly
|
|
* for EP0, and the system will fail basic enumeration. As no cause for this
|
|
* has currently been found, we cannot support any large IN transfers for
|
|
* EP0.
|
|
*/
|
|
#define EP0_MPS_LIMIT 64
|
|
|
|
struct s3c_hsotg;
|
|
struct s3c_hsotg_req;
|
|
|
|
/**
|
|
* struct s3c_hsotg_ep - driver endpoint definition.
|
|
* @ep: The gadget layer representation of the endpoint.
|
|
* @name: The driver generated name for the endpoint.
|
|
* @queue: Queue of requests for this endpoint.
|
|
* @parent: Reference back to the parent device structure.
|
|
* @req: The current request that the endpoint is processing. This is
|
|
* used to indicate an request has been loaded onto the endpoint
|
|
* and has yet to be completed (maybe due to data move, or simply
|
|
* awaiting an ack from the core all the data has been completed).
|
|
* @debugfs: File entry for debugfs file for this endpoint.
|
|
* @lock: State lock to protect contents of endpoint.
|
|
* @dir_in: Set to true if this endpoint is of the IN direction, which
|
|
* means that it is sending data to the Host.
|
|
* @index: The index for the endpoint registers.
|
|
* @name: The name array passed to the USB core.
|
|
* @halted: Set if the endpoint has been halted.
|
|
* @periodic: Set if this is a periodic ep, such as Interrupt
|
|
* @sent_zlp: Set if we've sent a zero-length packet.
|
|
* @total_data: The total number of data bytes done.
|
|
* @fifo_size: The size of the FIFO (for periodic IN endpoints)
|
|
* @fifo_load: The amount of data loaded into the FIFO (periodic IN)
|
|
* @last_load: The offset of data for the last start of request.
|
|
* @size_loaded: The last loaded size for DxEPTSIZE for periodic IN
|
|
*
|
|
* This is the driver's state for each registered enpoint, allowing it
|
|
* to keep track of transactions that need doing. Each endpoint has a
|
|
* lock to protect the state, to try and avoid using an overall lock
|
|
* for the host controller as much as possible.
|
|
*
|
|
* For periodic IN endpoints, we have fifo_size and fifo_load to try
|
|
* and keep track of the amount of data in the periodic FIFO for each
|
|
* of these as we don't have a status register that tells us how much
|
|
* is in each of them. (note, this may actually be useless information
|
|
* as in shared-fifo mode periodic in acts like a single-frame packet
|
|
* buffer than a fifo)
|
|
*/
|
|
struct s3c_hsotg_ep {
|
|
struct usb_ep ep;
|
|
struct list_head queue;
|
|
struct s3c_hsotg *parent;
|
|
struct s3c_hsotg_req *req;
|
|
struct dentry *debugfs;
|
|
|
|
spinlock_t lock;
|
|
|
|
unsigned long total_data;
|
|
unsigned int size_loaded;
|
|
unsigned int last_load;
|
|
unsigned int fifo_load;
|
|
unsigned short fifo_size;
|
|
|
|
unsigned char dir_in;
|
|
unsigned char index;
|
|
|
|
unsigned int halted:1;
|
|
unsigned int periodic:1;
|
|
unsigned int sent_zlp:1;
|
|
|
|
char name[10];
|
|
};
|
|
|
|
#define S3C_HSOTG_EPS (8+1) /* limit to 9 for the moment */
|
|
|
|
/**
|
|
* struct s3c_hsotg - driver state.
|
|
* @dev: The parent device supplied to the probe function
|
|
* @driver: USB gadget driver
|
|
* @plat: The platform specific configuration data.
|
|
* @regs: The memory area mapped for accessing registers.
|
|
* @regs_res: The resource that was allocated when claiming register space.
|
|
* @irq: The IRQ number we are using
|
|
* @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos.
|
|
* @debug_root: root directrory for debugfs.
|
|
* @debug_file: main status file for debugfs.
|
|
* @debug_fifo: FIFO status file for debugfs.
|
|
* @ep0_reply: Request used for ep0 reply.
|
|
* @ep0_buff: Buffer for EP0 reply data, if needed.
|
|
* @ctrl_buff: Buffer for EP0 control requests.
|
|
* @ctrl_req: Request for EP0 control packets.
|
|
* @eps: The endpoints being supplied to the gadget framework
|
|
*/
|
|
struct s3c_hsotg {
|
|
struct device *dev;
|
|
struct usb_gadget_driver *driver;
|
|
struct s3c_hsotg_plat *plat;
|
|
|
|
void __iomem *regs;
|
|
struct resource *regs_res;
|
|
int irq;
|
|
struct clk *clk;
|
|
|
|
unsigned int dedicated_fifos:1;
|
|
|
|
struct dentry *debug_root;
|
|
struct dentry *debug_file;
|
|
struct dentry *debug_fifo;
|
|
|
|
struct usb_request *ep0_reply;
|
|
struct usb_request *ctrl_req;
|
|
u8 ep0_buff[8];
|
|
u8 ctrl_buff[8];
|
|
|
|
struct usb_gadget gadget;
|
|
struct s3c_hsotg_ep eps[];
|
|
};
|
|
|
|
/**
|
|
* struct s3c_hsotg_req - data transfer request
|
|
* @req: The USB gadget request
|
|
* @queue: The list of requests for the endpoint this is queued for.
|
|
* @in_progress: Has already had size/packets written to core
|
|
* @mapped: DMA buffer for this request has been mapped via dma_map_single().
|
|
*/
|
|
struct s3c_hsotg_req {
|
|
struct usb_request req;
|
|
struct list_head queue;
|
|
unsigned char in_progress;
|
|
unsigned char mapped;
|
|
};
|
|
|
|
/* conversion functions */
|
|
static inline struct s3c_hsotg_req *our_req(struct usb_request *req)
|
|
{
|
|
return container_of(req, struct s3c_hsotg_req, req);
|
|
}
|
|
|
|
static inline struct s3c_hsotg_ep *our_ep(struct usb_ep *ep)
|
|
{
|
|
return container_of(ep, struct s3c_hsotg_ep, ep);
|
|
}
|
|
|
|
static inline struct s3c_hsotg *to_hsotg(struct usb_gadget *gadget)
|
|
{
|
|
return container_of(gadget, struct s3c_hsotg, gadget);
|
|
}
|
|
|
|
static inline void __orr32(void __iomem *ptr, u32 val)
|
|
{
|
|
writel(readl(ptr) | val, ptr);
|
|
}
|
|
|
|
static inline void __bic32(void __iomem *ptr, u32 val)
|
|
{
|
|
writel(readl(ptr) & ~val, ptr);
|
|
}
|
|
|
|
/* forward decleration of functions */
|
|
static void s3c_hsotg_dump(struct s3c_hsotg *hsotg);
|
|
|
|
/**
|
|
* using_dma - return the DMA status of the driver.
|
|
* @hsotg: The driver state.
|
|
*
|
|
* Return true if we're using DMA.
|
|
*
|
|
* Currently, we have the DMA support code worked into everywhere
|
|
* that needs it, but the AMBA DMA implementation in the hardware can
|
|
* only DMA from 32bit aligned addresses. This means that gadgets such
|
|
* as the CDC Ethernet cannot work as they often pass packets which are
|
|
* not 32bit aligned.
|
|
*
|
|
* Unfortunately the choice to use DMA or not is global to the controller
|
|
* and seems to be only settable when the controller is being put through
|
|
* a core reset. This means we either need to fix the gadgets to take
|
|
* account of DMA alignment, or add bounce buffers (yuerk).
|
|
*
|
|
* Until this issue is sorted out, we always return 'false'.
|
|
*/
|
|
static inline bool using_dma(struct s3c_hsotg *hsotg)
|
|
{
|
|
return false; /* support is not complete */
|
|
}
|
|
|
|
/**
|
|
* s3c_hsotg_en_gsint - enable one or more of the general interrupt
|
|
* @hsotg: The device state
|
|
* @ints: A bitmask of the interrupts to enable
|
|
*/
|
|
static void s3c_hsotg_en_gsint(struct s3c_hsotg *hsotg, u32 ints)
|
|
{
|
|
u32 gsintmsk = readl(hsotg->regs + S3C_GINTMSK);
|
|
u32 new_gsintmsk;
|
|
|
|
new_gsintmsk = gsintmsk | ints;
|
|
|
|
if (new_gsintmsk != gsintmsk) {
|
|
dev_dbg(hsotg->dev, "gsintmsk now 0x%08x\n", new_gsintmsk);
|
|
writel(new_gsintmsk, hsotg->regs + S3C_GINTMSK);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* s3c_hsotg_disable_gsint - disable one or more of the general interrupt
|
|
* @hsotg: The device state
|
|
* @ints: A bitmask of the interrupts to enable
|
|
*/
|
|
static void s3c_hsotg_disable_gsint(struct s3c_hsotg *hsotg, u32 ints)
|
|
{
|
|
u32 gsintmsk = readl(hsotg->regs + S3C_GINTMSK);
|
|
u32 new_gsintmsk;
|
|
|
|
new_gsintmsk = gsintmsk & ~ints;
|
|
|
|
if (new_gsintmsk != gsintmsk)
|
|
writel(new_gsintmsk, hsotg->regs + S3C_GINTMSK);
|
|
}
|
|
|
|
/**
|
|
* s3c_hsotg_ctrl_epint - enable/disable an endpoint irq
|
|
* @hsotg: The device state
|
|
* @ep: The endpoint index
|
|
* @dir_in: True if direction is in.
|
|
* @en: The enable value, true to enable
|
|
*
|
|
* Set or clear the mask for an individual endpoint's interrupt
|
|
* request.
|
|
*/
|
|
static void s3c_hsotg_ctrl_epint(struct s3c_hsotg *hsotg,
|
|
unsigned int ep, unsigned int dir_in,
|
|
unsigned int en)
|
|
{
|
|
unsigned long flags;
|
|
u32 bit = 1 << ep;
|
|
u32 daint;
|
|
|
|
if (!dir_in)
|
|
bit <<= 16;
|
|
|
|
local_irq_save(flags);
|
|
daint = readl(hsotg->regs + S3C_DAINTMSK);
|
|
if (en)
|
|
daint |= bit;
|
|
else
|
|
daint &= ~bit;
|
|
writel(daint, hsotg->regs + S3C_DAINTMSK);
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
/**
|
|
* s3c_hsotg_init_fifo - initialise non-periodic FIFOs
|
|
* @hsotg: The device instance.
|
|
*/
|
|
static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg)
|
|
{
|
|
unsigned int ep;
|
|
unsigned int addr;
|
|
unsigned int size;
|
|
int timeout;
|
|
u32 val;
|
|
|
|
/* the ryu 2.6.24 release ahs
|
|
writel(0x1C0, hsotg->regs + S3C_GRXFSIZ);
|
|
writel(S3C_GNPTXFSIZ_NPTxFStAddr(0x200) |
|
|
S3C_GNPTXFSIZ_NPTxFDep(0x1C0),
|
|
hsotg->regs + S3C_GNPTXFSIZ);
|
|
*/
|
|
|
|
/* set FIFO sizes to 2048/1024 */
|
|
|
|
writel(2048, hsotg->regs + S3C_GRXFSIZ);
|
|
writel(S3C_GNPTXFSIZ_NPTxFStAddr(2048) |
|
|
S3C_GNPTXFSIZ_NPTxFDep(1024),
|
|
hsotg->regs + S3C_GNPTXFSIZ);
|
|
|
|
/* arange all the rest of the TX FIFOs, as some versions of this
|
|
* block have overlapping default addresses. This also ensures
|
|
* that if the settings have been changed, then they are set to
|
|
* known values. */
|
|
|
|
/* start at the end of the GNPTXFSIZ, rounded up */
|
|
addr = 2048 + 1024;
|
|
size = 768;
|
|
|
|
/* currently we allocate TX FIFOs for all possible endpoints,
|
|
* and assume that they are all the same size. */
|
|
|
|
for (ep = 0; ep <= 15; ep++) {
|
|
val = addr;
|
|
val |= size << S3C_DPTXFSIZn_DPTxFSize_SHIFT;
|
|
addr += size;
|
|
|
|
writel(val, hsotg->regs + S3C_DPTXFSIZn(ep));
|
|
}
|
|
|
|
/* according to p428 of the design guide, we need to ensure that
|
|
* all fifos are flushed before continuing */
|
|
|
|
writel(S3C_GRSTCTL_TxFNum(0x10) | S3C_GRSTCTL_TxFFlsh |
|
|
S3C_GRSTCTL_RxFFlsh, hsotg->regs + S3C_GRSTCTL);
|
|
|
|
/* wait until the fifos are both flushed */
|
|
timeout = 100;
|
|
while (1) {
|
|
val = readl(hsotg->regs + S3C_GRSTCTL);
|
|
|
|
if ((val & (S3C_GRSTCTL_TxFFlsh | S3C_GRSTCTL_RxFFlsh)) == 0)
|
|
break;
|
|
|
|
if (--timeout == 0) {
|
|
dev_err(hsotg->dev,
|
|
"%s: timeout flushing fifos (GRSTCTL=%08x)\n",
|
|
__func__, val);
|
|
}
|
|
|
|
udelay(1);
|
|
}
|
|
|
|
dev_dbg(hsotg->dev, "FIFOs reset, timeout at %d\n", timeout);
|
|
}
|
|
|
|
/**
|
|
* @ep: USB endpoint to allocate request for.
|
|
* @flags: Allocation flags
|
|
*
|
|
* Allocate a new USB request structure appropriate for the specified endpoint
|
|
*/
|
|
static struct usb_request *s3c_hsotg_ep_alloc_request(struct usb_ep *ep,
|
|
gfp_t flags)
|
|
{
|
|
struct s3c_hsotg_req *req;
|
|
|
|
req = kzalloc(sizeof(struct s3c_hsotg_req), flags);
|
|
if (!req)
|
|
return NULL;
|
|
|
|
INIT_LIST_HEAD(&req->queue);
|
|
|
|
req->req.dma = DMA_ADDR_INVALID;
|
|
return &req->req;
|
|
}
|
|
|
|
/**
|
|
* is_ep_periodic - return true if the endpoint is in periodic mode.
|
|
* @hs_ep: The endpoint to query.
|
|
*
|
|
* Returns true if the endpoint is in periodic mode, meaning it is being
|
|
* used for an Interrupt or ISO transfer.
|
|
*/
|
|
static inline int is_ep_periodic(struct s3c_hsotg_ep *hs_ep)
|
|
{
|
|
return hs_ep->periodic;
|
|
}
|
|
|
|
/**
|
|
* s3c_hsotg_unmap_dma - unmap the DMA memory being used for the request
|
|
* @hsotg: The device state.
|
|
* @hs_ep: The endpoint for the request
|
|
* @hs_req: The request being processed.
|
|
*
|
|
* This is the reverse of s3c_hsotg_map_dma(), called for the completion
|
|
* of a request to ensure the buffer is ready for access by the caller.
|
|
*/
|
|
static void s3c_hsotg_unmap_dma(struct s3c_hsotg *hsotg,
|
|
struct s3c_hsotg_ep *hs_ep,
|
|
struct s3c_hsotg_req *hs_req)
|
|
{
|
|
struct usb_request *req = &hs_req->req;
|
|
enum dma_data_direction dir;
|
|
|
|
dir = hs_ep->dir_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
|
|
|
|
/* ignore this if we're not moving any data */
|
|
if (hs_req->req.length == 0)
|
|
return;
|
|
|
|
if (hs_req->mapped) {
|
|
/* we mapped this, so unmap and remove the dma */
|
|
|
|
dma_unmap_single(hsotg->dev, req->dma, req->length, dir);
|
|
|
|
req->dma = DMA_ADDR_INVALID;
|
|
hs_req->mapped = 0;
|
|
} else {
|
|
dma_sync_single_for_cpu(hsotg->dev, req->dma, req->length, dir);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* s3c_hsotg_write_fifo - write packet Data to the TxFIFO
|
|
* @hsotg: The controller state.
|
|
* @hs_ep: The endpoint we're going to write for.
|
|
* @hs_req: The request to write data for.
|
|
*
|
|
* This is called when the TxFIFO has some space in it to hold a new
|
|
* transmission and we have something to give it. The actual setup of
|
|
* the data size is done elsewhere, so all we have to do is to actually
|
|
* write the data.
|
|
*
|
|
* The return value is zero if there is more space (or nothing was done)
|
|
* otherwise -ENOSPC is returned if the FIFO space was used up.
|
|
*
|
|
* This routine is only needed for PIO
|
|
*/
|
|
static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg,
|
|
struct s3c_hsotg_ep *hs_ep,
|
|
struct s3c_hsotg_req *hs_req)
|
|
{
|
|
bool periodic = is_ep_periodic(hs_ep);
|
|
u32 gnptxsts = readl(hsotg->regs + S3C_GNPTXSTS);
|
|
int buf_pos = hs_req->req.actual;
|
|
int to_write = hs_ep->size_loaded;
|
|
void *data;
|
|
int can_write;
|
|
int pkt_round;
|
|
|
|
to_write -= (buf_pos - hs_ep->last_load);
|
|
|
|
/* if there's nothing to write, get out early */
|
|
if (to_write == 0)
|
|
return 0;
|
|
|
|
if (periodic && !hsotg->dedicated_fifos) {
|
|
u32 epsize = readl(hsotg->regs + S3C_DIEPTSIZ(hs_ep->index));
|
|
int size_left;
|
|
int size_done;
|
|
|
|
/* work out how much data was loaded so we can calculate
|
|
* how much data is left in the fifo. */
|
|
|
|
size_left = S3C_DxEPTSIZ_XferSize_GET(epsize);
|
|
|
|
/* if shared fifo, we cannot write anything until the
|
|
* previous data has been completely sent.
|
|
*/
|
|
if (hs_ep->fifo_load != 0) {
|
|
s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_PTxFEmp);
|
|
return -ENOSPC;
|
|
}
|
|
|
|
dev_dbg(hsotg->dev, "%s: left=%d, load=%d, fifo=%d, size %d\n",
|
|
__func__, size_left,
|
|
hs_ep->size_loaded, hs_ep->fifo_load, hs_ep->fifo_size);
|
|
|
|
/* how much of the data has moved */
|
|
size_done = hs_ep->size_loaded - size_left;
|
|
|
|
/* how much data is left in the fifo */
|
|
can_write = hs_ep->fifo_load - size_done;
|
|
dev_dbg(hsotg->dev, "%s: => can_write1=%d\n",
|
|
__func__, can_write);
|
|
|
|
can_write = hs_ep->fifo_size - can_write;
|
|
dev_dbg(hsotg->dev, "%s: => can_write2=%d\n",
|
|
__func__, can_write);
|
|
|
|
if (can_write <= 0) {
|
|
s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_PTxFEmp);
|
|
return -ENOSPC;
|
|
}
|
|
} else if (hsotg->dedicated_fifos && hs_ep->index != 0) {
|
|
can_write = readl(hsotg->regs + S3C_DTXFSTS(hs_ep->index));
|
|
|
|
can_write &= 0xffff;
|
|
can_write *= 4;
|
|
} else {
|
|
if (S3C_GNPTXSTS_NPTxQSpcAvail_GET(gnptxsts) == 0) {
|
|
dev_dbg(hsotg->dev,
|
|
"%s: no queue slots available (0x%08x)\n",
|
|
__func__, gnptxsts);
|
|
|
|
s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_NPTxFEmp);
|
|
return -ENOSPC;
|
|
}
|
|
|
|
can_write = S3C_GNPTXSTS_NPTxFSpcAvail_GET(gnptxsts);
|
|
can_write *= 4; /* fifo size is in 32bit quantities. */
|
|
}
|
|
|
|
dev_dbg(hsotg->dev, "%s: GNPTXSTS=%08x, can=%d, to=%d, mps %d\n",
|
|
__func__, gnptxsts, can_write, to_write, hs_ep->ep.maxpacket);
|
|
|
|
/* limit to 512 bytes of data, it seems at least on the non-periodic
|
|
* FIFO, requests of >512 cause the endpoint to get stuck with a
|
|
* fragment of the end of the transfer in it.
|
|
*/
|
|
if (can_write > 512)
|
|
can_write = 512;
|
|
|
|
/* limit the write to one max-packet size worth of data, but allow
|
|
* the transfer to return that it did not run out of fifo space
|
|
* doing it. */
|
|
if (to_write > hs_ep->ep.maxpacket) {
|
|
to_write = hs_ep->ep.maxpacket;
|
|
|
|
s3c_hsotg_en_gsint(hsotg,
|
|
periodic ? S3C_GINTSTS_PTxFEmp :
|
|
S3C_GINTSTS_NPTxFEmp);
|
|
}
|
|
|
|
/* see if we can write data */
|
|
|
|
if (to_write > can_write) {
|
|
to_write = can_write;
|
|
pkt_round = to_write % hs_ep->ep.maxpacket;
|
|
|
|
/* Not sure, but we probably shouldn't be writing partial
|
|
* packets into the FIFO, so round the write down to an
|
|
* exact number of packets.
|
|
*
|
|
* Note, we do not currently check to see if we can ever
|
|
* write a full packet or not to the FIFO.
|
|
*/
|
|
|
|
if (pkt_round)
|
|
to_write -= pkt_round;
|
|
|
|
/* enable correct FIFO interrupt to alert us when there
|
|
* is more room left. */
|
|
|
|
s3c_hsotg_en_gsint(hsotg,
|
|
periodic ? S3C_GINTSTS_PTxFEmp :
|
|
S3C_GINTSTS_NPTxFEmp);
|
|
}
|
|
|
|
dev_dbg(hsotg->dev, "write %d/%d, can_write %d, done %d\n",
|
|
to_write, hs_req->req.length, can_write, buf_pos);
|
|
|
|
if (to_write <= 0)
|
|
return -ENOSPC;
|
|
|
|
hs_req->req.actual = buf_pos + to_write;
|
|
hs_ep->total_data += to_write;
|
|
|
|
if (periodic)
|
|
hs_ep->fifo_load += to_write;
|
|
|
|
to_write = DIV_ROUND_UP(to_write, 4);
|
|
data = hs_req->req.buf + buf_pos;
|
|
|
|
writesl(hsotg->regs + S3C_EPFIFO(hs_ep->index), data, to_write);
|
|
|
|
return (to_write >= can_write) ? -ENOSPC : 0;
|
|
}
|
|
|
|
/**
|
|
* get_ep_limit - get the maximum data legnth for this endpoint
|
|
* @hs_ep: The endpoint
|
|
*
|
|
* Return the maximum data that can be queued in one go on a given endpoint
|
|
* so that transfers that are too long can be split.
|
|
*/
|
|
static unsigned get_ep_limit(struct s3c_hsotg_ep *hs_ep)
|
|
{
|
|
int index = hs_ep->index;
|
|
unsigned maxsize;
|
|
unsigned maxpkt;
|
|
|
|
if (index != 0) {
|
|
maxsize = S3C_DxEPTSIZ_XferSize_LIMIT + 1;
|
|
maxpkt = S3C_DxEPTSIZ_PktCnt_LIMIT + 1;
|
|
} else {
|
|
maxsize = 64+64;
|
|
if (hs_ep->dir_in)
|
|
maxpkt = S3C_DIEPTSIZ0_PktCnt_LIMIT + 1;
|
|
else
|
|
maxpkt = 2;
|
|
}
|
|
|
|
/* we made the constant loading easier above by using +1 */
|
|
maxpkt--;
|
|
maxsize--;
|
|
|
|
/* constrain by packet count if maxpkts*pktsize is greater
|
|
* than the length register size. */
|
|
|
|
if ((maxpkt * hs_ep->ep.maxpacket) < maxsize)
|
|
maxsize = maxpkt * hs_ep->ep.maxpacket;
|
|
|
|
return maxsize;
|
|
}
|
|
|
|
/**
|
|
* s3c_hsotg_start_req - start a USB request from an endpoint's queue
|
|
* @hsotg: The controller state.
|
|
* @hs_ep: The endpoint to process a request for
|
|
* @hs_req: The request to start.
|
|
* @continuing: True if we are doing more for the current request.
|
|
*
|
|
* Start the given request running by setting the endpoint registers
|
|
* appropriately, and writing any data to the FIFOs.
|
|
*/
|
|
static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg,
|
|
struct s3c_hsotg_ep *hs_ep,
|
|
struct s3c_hsotg_req *hs_req,
|
|
bool continuing)
|
|
{
|
|
struct usb_request *ureq = &hs_req->req;
|
|
int index = hs_ep->index;
|
|
int dir_in = hs_ep->dir_in;
|
|
u32 epctrl_reg;
|
|
u32 epsize_reg;
|
|
u32 epsize;
|
|
u32 ctrl;
|
|
unsigned length;
|
|
unsigned packets;
|
|
unsigned maxreq;
|
|
|
|
if (index != 0) {
|
|
if (hs_ep->req && !continuing) {
|
|
dev_err(hsotg->dev, "%s: active request\n", __func__);
|
|
WARN_ON(1);
|
|
return;
|
|
} else if (hs_ep->req != hs_req && continuing) {
|
|
dev_err(hsotg->dev,
|
|
"%s: continue different req\n", __func__);
|
|
WARN_ON(1);
|
|
return;
|
|
}
|
|
}
|
|
|
|
epctrl_reg = dir_in ? S3C_DIEPCTL(index) : S3C_DOEPCTL(index);
|
|
epsize_reg = dir_in ? S3C_DIEPTSIZ(index) : S3C_DOEPTSIZ(index);
|
|
|
|
dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x, ep %d, dir %s\n",
|
|
__func__, readl(hsotg->regs + epctrl_reg), index,
|
|
hs_ep->dir_in ? "in" : "out");
|
|
|
|
/* If endpoint is stalled, we will restart request later */
|
|
ctrl = readl(hsotg->regs + epctrl_reg);
|
|
|
|
if (ctrl & S3C_DxEPCTL_Stall) {
|
|
dev_warn(hsotg->dev, "%s: ep%d is stalled\n", __func__, index);
|
|
return;
|
|
}
|
|
|
|
length = ureq->length - ureq->actual;
|
|
|
|
if (0)
|
|
dev_dbg(hsotg->dev,
|
|
"REQ buf %p len %d dma 0x%08x noi=%d zp=%d snok=%d\n",
|
|
ureq->buf, length, ureq->dma,
|
|
ureq->no_interrupt, ureq->zero, ureq->short_not_ok);
|
|
|
|
maxreq = get_ep_limit(hs_ep);
|
|
if (length > maxreq) {
|
|
int round = maxreq % hs_ep->ep.maxpacket;
|
|
|
|
dev_dbg(hsotg->dev, "%s: length %d, max-req %d, r %d\n",
|
|
__func__, length, maxreq, round);
|
|
|
|
/* round down to multiple of packets */
|
|
if (round)
|
|
maxreq -= round;
|
|
|
|
length = maxreq;
|
|
}
|
|
|
|
if (length)
|
|
packets = DIV_ROUND_UP(length, hs_ep->ep.maxpacket);
|
|
else
|
|
packets = 1; /* send one packet if length is zero. */
|
|
|
|
if (dir_in && index != 0)
|
|
epsize = S3C_DxEPTSIZ_MC(1);
|
|
else
|
|
epsize = 0;
|
|
|
|
if (index != 0 && ureq->zero) {
|
|
/* test for the packets being exactly right for the
|
|
* transfer */
|
|
|
|
if (length == (packets * hs_ep->ep.maxpacket))
|
|
packets++;
|
|
}
|
|
|
|
epsize |= S3C_DxEPTSIZ_PktCnt(packets);
|
|
epsize |= S3C_DxEPTSIZ_XferSize(length);
|
|
|
|
dev_dbg(hsotg->dev, "%s: %d@%d/%d, 0x%08x => 0x%08x\n",
|
|
__func__, packets, length, ureq->length, epsize, epsize_reg);
|
|
|
|
/* store the request as the current one we're doing */
|
|
hs_ep->req = hs_req;
|
|
|
|
/* write size / packets */
|
|
writel(epsize, hsotg->regs + epsize_reg);
|
|
|
|
if (using_dma(hsotg)) {
|
|
unsigned int dma_reg;
|
|
|
|
/* write DMA address to control register, buffer already
|
|
* synced by s3c_hsotg_ep_queue(). */
|
|
|
|
dma_reg = dir_in ? S3C_DIEPDMA(index) : S3C_DOEPDMA(index);
|
|
writel(ureq->dma, hsotg->regs + dma_reg);
|
|
|
|
dev_dbg(hsotg->dev, "%s: 0x%08x => 0x%08x\n",
|
|
__func__, ureq->dma, dma_reg);
|
|
}
|
|
|
|
ctrl |= S3C_DxEPCTL_EPEna; /* ensure ep enabled */
|
|
ctrl |= S3C_DxEPCTL_USBActEp;
|
|
ctrl |= S3C_DxEPCTL_CNAK; /* clear NAK set by core */
|
|
|
|
dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl);
|
|
writel(ctrl, hsotg->regs + epctrl_reg);
|
|
|
|
/* set these, it seems that DMA support increments past the end
|
|
* of the packet buffer so we need to calculate the length from
|
|
* this information. */
|
|
hs_ep->size_loaded = length;
|
|
hs_ep->last_load = ureq->actual;
|
|
|
|
if (dir_in && !using_dma(hsotg)) {
|
|
/* set these anyway, we may need them for non-periodic in */
|
|
hs_ep->fifo_load = 0;
|
|
|
|
s3c_hsotg_write_fifo(hsotg, hs_ep, hs_req);
|
|
}
|
|
|
|
/* clear the INTknTXFEmpMsk when we start request, more as a aide
|
|
* to debugging to see what is going on. */
|
|
if (dir_in)
|
|
writel(S3C_DIEPMSK_INTknTXFEmpMsk,
|
|
hsotg->regs + S3C_DIEPINT(index));
|
|
|
|
/* Note, trying to clear the NAK here causes problems with transmit
|
|
* on the S3C6400 ending up with the TXFIFO becoming full. */
|
|
|
|
/* check ep is enabled */
|
|
if (!(readl(hsotg->regs + epctrl_reg) & S3C_DxEPCTL_EPEna))
|
|
dev_warn(hsotg->dev,
|
|
"ep%d: failed to become enabled (DxEPCTL=0x%08x)?\n",
|
|
index, readl(hsotg->regs + epctrl_reg));
|
|
|
|
dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n",
|
|
__func__, readl(hsotg->regs + epctrl_reg));
|
|
}
|
|
|
|
/**
|
|
* s3c_hsotg_map_dma - map the DMA memory being used for the request
|
|
* @hsotg: The device state.
|
|
* @hs_ep: The endpoint the request is on.
|
|
* @req: The request being processed.
|
|
*
|
|
* We've been asked to queue a request, so ensure that the memory buffer
|
|
* is correctly setup for DMA. If we've been passed an extant DMA address
|
|
* then ensure the buffer has been synced to memory. If our buffer has no
|
|
* DMA memory, then we map the memory and mark our request to allow us to
|
|
* cleanup on completion.
|
|
*/
|
|
static int s3c_hsotg_map_dma(struct s3c_hsotg *hsotg,
|
|
struct s3c_hsotg_ep *hs_ep,
|
|
struct usb_request *req)
|
|
{
|
|
enum dma_data_direction dir;
|
|
struct s3c_hsotg_req *hs_req = our_req(req);
|
|
|
|
dir = hs_ep->dir_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
|
|
|
|
/* if the length is zero, ignore the DMA data */
|
|
if (hs_req->req.length == 0)
|
|
return 0;
|
|
|
|
if (req->dma == DMA_ADDR_INVALID) {
|
|
dma_addr_t dma;
|
|
|
|
dma = dma_map_single(hsotg->dev, req->buf, req->length, dir);
|
|
|
|
if (unlikely(dma_mapping_error(hsotg->dev, dma)))
|
|
goto dma_error;
|
|
|
|
if (dma & 3) {
|
|
dev_err(hsotg->dev, "%s: unaligned dma buffer\n",
|
|
__func__);
|
|
|
|
dma_unmap_single(hsotg->dev, dma, req->length, dir);
|
|
return -EINVAL;
|
|
}
|
|
|
|
hs_req->mapped = 1;
|
|
req->dma = dma;
|
|
} else {
|
|
dma_sync_single_for_cpu(hsotg->dev, req->dma, req->length, dir);
|
|
hs_req->mapped = 0;
|
|
}
|
|
|
|
return 0;
|
|
|
|
dma_error:
|
|
dev_err(hsotg->dev, "%s: failed to map buffer %p, %d bytes\n",
|
|
__func__, req->buf, req->length);
|
|
|
|
return -EIO;
|
|
}
|
|
|
|
static int s3c_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req,
|
|
gfp_t gfp_flags)
|
|
{
|
|
struct s3c_hsotg_req *hs_req = our_req(req);
|
|
struct s3c_hsotg_ep *hs_ep = our_ep(ep);
|
|
struct s3c_hsotg *hs = hs_ep->parent;
|
|
unsigned long irqflags;
|
|
bool first;
|
|
|
|
dev_dbg(hs->dev, "%s: req %p: %d@%p, noi=%d, zero=%d, snok=%d\n",
|
|
ep->name, req, req->length, req->buf, req->no_interrupt,
|
|
req->zero, req->short_not_ok);
|
|
|
|
/* initialise status of the request */
|
|
INIT_LIST_HEAD(&hs_req->queue);
|
|
req->actual = 0;
|
|
req->status = -EINPROGRESS;
|
|
|
|
/* if we're using DMA, sync the buffers as necessary */
|
|
if (using_dma(hs)) {
|
|
int ret = s3c_hsotg_map_dma(hs, hs_ep, req);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
spin_lock_irqsave(&hs_ep->lock, irqflags);
|
|
|
|
first = list_empty(&hs_ep->queue);
|
|
list_add_tail(&hs_req->queue, &hs_ep->queue);
|
|
|
|
if (first)
|
|
s3c_hsotg_start_req(hs, hs_ep, hs_req, false);
|
|
|
|
spin_unlock_irqrestore(&hs_ep->lock, irqflags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void s3c_hsotg_ep_free_request(struct usb_ep *ep,
|
|
struct usb_request *req)
|
|
{
|
|
struct s3c_hsotg_req *hs_req = our_req(req);
|
|
|
|
kfree(hs_req);
|
|
}
|
|
|
|
/**
|
|
* s3c_hsotg_complete_oursetup - setup completion callback
|
|
* @ep: The endpoint the request was on.
|
|
* @req: The request completed.
|
|
*
|
|
* Called on completion of any requests the driver itself
|
|
* submitted that need cleaning up.
|
|
*/
|
|
static void s3c_hsotg_complete_oursetup(struct usb_ep *ep,
|
|
struct usb_request *req)
|
|
{
|
|
struct s3c_hsotg_ep *hs_ep = our_ep(ep);
|
|
struct s3c_hsotg *hsotg = hs_ep->parent;
|
|
|
|
dev_dbg(hsotg->dev, "%s: ep %p, req %p\n", __func__, ep, req);
|
|
|
|
s3c_hsotg_ep_free_request(ep, req);
|
|
}
|
|
|
|
/**
|
|
* ep_from_windex - convert control wIndex value to endpoint
|
|
* @hsotg: The driver state.
|
|
* @windex: The control request wIndex field (in host order).
|
|
*
|
|
* Convert the given wIndex into a pointer to an driver endpoint
|
|
* structure, or return NULL if it is not a valid endpoint.
|
|
*/
|
|
static struct s3c_hsotg_ep *ep_from_windex(struct s3c_hsotg *hsotg,
|
|
u32 windex)
|
|
{
|
|
struct s3c_hsotg_ep *ep = &hsotg->eps[windex & 0x7F];
|
|
int dir = (windex & USB_DIR_IN) ? 1 : 0;
|
|
int idx = windex & 0x7F;
|
|
|
|
if (windex >= 0x100)
|
|
return NULL;
|
|
|
|
if (idx > S3C_HSOTG_EPS)
|
|
return NULL;
|
|
|
|
if (idx && ep->dir_in != dir)
|
|
return NULL;
|
|
|
|
return ep;
|
|
}
|
|
|
|
/**
|
|
* s3c_hsotg_send_reply - send reply to control request
|
|
* @hsotg: The device state
|
|
* @ep: Endpoint 0
|
|
* @buff: Buffer for request
|
|
* @length: Length of reply.
|
|
*
|
|
* Create a request and queue it on the given endpoint. This is useful as
|
|
* an internal method of sending replies to certain control requests, etc.
|
|
*/
|
|
static int s3c_hsotg_send_reply(struct s3c_hsotg *hsotg,
|
|
struct s3c_hsotg_ep *ep,
|
|
void *buff,
|
|
int length)
|
|
{
|
|
struct usb_request *req;
|
|
int ret;
|
|
|
|
dev_dbg(hsotg->dev, "%s: buff %p, len %d\n", __func__, buff, length);
|
|
|
|
req = s3c_hsotg_ep_alloc_request(&ep->ep, GFP_ATOMIC);
|
|
hsotg->ep0_reply = req;
|
|
if (!req) {
|
|
dev_warn(hsotg->dev, "%s: cannot alloc req\n", __func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
req->buf = hsotg->ep0_buff;
|
|
req->length = length;
|
|
req->zero = 1; /* always do zero-length final transfer */
|
|
req->complete = s3c_hsotg_complete_oursetup;
|
|
|
|
if (length)
|
|
memcpy(req->buf, buff, length);
|
|
else
|
|
ep->sent_zlp = 1;
|
|
|
|
ret = s3c_hsotg_ep_queue(&ep->ep, req, GFP_ATOMIC);
|
|
if (ret) {
|
|
dev_warn(hsotg->dev, "%s: cannot queue req\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* s3c_hsotg_process_req_status - process request GET_STATUS
|
|
* @hsotg: The device state
|
|
* @ctrl: USB control request
|
|
*/
|
|
static int s3c_hsotg_process_req_status(struct s3c_hsotg *hsotg,
|
|
struct usb_ctrlrequest *ctrl)
|
|
{
|
|
struct s3c_hsotg_ep *ep0 = &hsotg->eps[0];
|
|
struct s3c_hsotg_ep *ep;
|
|
__le16 reply;
|
|
int ret;
|
|
|
|
dev_dbg(hsotg->dev, "%s: USB_REQ_GET_STATUS\n", __func__);
|
|
|
|
if (!ep0->dir_in) {
|
|
dev_warn(hsotg->dev, "%s: direction out?\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (ctrl->bRequestType & USB_RECIP_MASK) {
|
|
case USB_RECIP_DEVICE:
|
|
reply = cpu_to_le16(0); /* bit 0 => self powered,
|
|
* bit 1 => remote wakeup */
|
|
break;
|
|
|
|
case USB_RECIP_INTERFACE:
|
|
/* currently, the data result should be zero */
|
|
reply = cpu_to_le16(0);
|
|
break;
|
|
|
|
case USB_RECIP_ENDPOINT:
|
|
ep = ep_from_windex(hsotg, le16_to_cpu(ctrl->wIndex));
|
|
if (!ep)
|
|
return -ENOENT;
|
|
|
|
reply = cpu_to_le16(ep->halted ? 1 : 0);
|
|
break;
|
|
|
|
default:
|
|
return 0;
|
|
}
|
|
|
|
if (le16_to_cpu(ctrl->wLength) != 2)
|
|
return -EINVAL;
|
|
|
|
ret = s3c_hsotg_send_reply(hsotg, ep0, &reply, 2);
|
|
if (ret) {
|
|
dev_err(hsotg->dev, "%s: failed to send reply\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value);
|
|
|
|
/**
|
|
* get_ep_head - return the first request on the endpoint
|
|
* @hs_ep: The controller endpoint to get
|
|
*
|
|
* Get the first request on the endpoint.
|
|
*/
|
|
static struct s3c_hsotg_req *get_ep_head(struct s3c_hsotg_ep *hs_ep)
|
|
{
|
|
if (list_empty(&hs_ep->queue))
|
|
return NULL;
|
|
|
|
return list_first_entry(&hs_ep->queue, struct s3c_hsotg_req, queue);
|
|
}
|
|
|
|
/**
|
|
* s3c_hsotg_process_req_featire - process request {SET,CLEAR}_FEATURE
|
|
* @hsotg: The device state
|
|
* @ctrl: USB control request
|
|
*/
|
|
static int s3c_hsotg_process_req_feature(struct s3c_hsotg *hsotg,
|
|
struct usb_ctrlrequest *ctrl)
|
|
{
|
|
struct s3c_hsotg_ep *ep0 = &hsotg->eps[0];
|
|
struct s3c_hsotg_req *hs_req;
|
|
bool restart;
|
|
bool set = (ctrl->bRequest == USB_REQ_SET_FEATURE);
|
|
struct s3c_hsotg_ep *ep;
|
|
int ret;
|
|
|
|
dev_dbg(hsotg->dev, "%s: %s_FEATURE\n",
|
|
__func__, set ? "SET" : "CLEAR");
|
|
|
|
if (ctrl->bRequestType == USB_RECIP_ENDPOINT) {
|
|
ep = ep_from_windex(hsotg, le16_to_cpu(ctrl->wIndex));
|
|
if (!ep) {
|
|
dev_dbg(hsotg->dev, "%s: no endpoint for 0x%04x\n",
|
|
__func__, le16_to_cpu(ctrl->wIndex));
|
|
return -ENOENT;
|
|
}
|
|
|
|
switch (le16_to_cpu(ctrl->wValue)) {
|
|
case USB_ENDPOINT_HALT:
|
|
s3c_hsotg_ep_sethalt(&ep->ep, set);
|
|
|
|
ret = s3c_hsotg_send_reply(hsotg, ep0, NULL, 0);
|
|
if (ret) {
|
|
dev_err(hsotg->dev,
|
|
"%s: failed to send reply\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
if (!set) {
|
|
/*
|
|
* If we have request in progress,
|
|
* then complete it
|
|
*/
|
|
if (ep->req) {
|
|
hs_req = ep->req;
|
|
ep->req = NULL;
|
|
list_del_init(&hs_req->queue);
|
|
hs_req->req.complete(&ep->ep,
|
|
&hs_req->req);
|
|
}
|
|
|
|
/* If we have pending request, then start it */
|
|
restart = !list_empty(&ep->queue);
|
|
if (restart) {
|
|
hs_req = get_ep_head(ep);
|
|
s3c_hsotg_start_req(hsotg, ep,
|
|
hs_req, false);
|
|
}
|
|
}
|
|
|
|
break;
|
|
|
|
default:
|
|
return -ENOENT;
|
|
}
|
|
} else
|
|
return -ENOENT; /* currently only deal with endpoint */
|
|
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
* s3c_hsotg_process_control - process a control request
|
|
* @hsotg: The device state
|
|
* @ctrl: The control request received
|
|
*
|
|
* The controller has received the SETUP phase of a control request, and
|
|
* needs to work out what to do next (and whether to pass it on to the
|
|
* gadget driver).
|
|
*/
|
|
static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg,
|
|
struct usb_ctrlrequest *ctrl)
|
|
{
|
|
struct s3c_hsotg_ep *ep0 = &hsotg->eps[0];
|
|
int ret = 0;
|
|
u32 dcfg;
|
|
|
|
ep0->sent_zlp = 0;
|
|
|
|
dev_dbg(hsotg->dev, "ctrl Req=%02x, Type=%02x, V=%04x, L=%04x\n",
|
|
ctrl->bRequest, ctrl->bRequestType,
|
|
ctrl->wValue, ctrl->wLength);
|
|
|
|
/* record the direction of the request, for later use when enquing
|
|
* packets onto EP0. */
|
|
|
|
ep0->dir_in = (ctrl->bRequestType & USB_DIR_IN) ? 1 : 0;
|
|
dev_dbg(hsotg->dev, "ctrl: dir_in=%d\n", ep0->dir_in);
|
|
|
|
/* if we've no data with this request, then the last part of the
|
|
* transaction is going to implicitly be IN. */
|
|
if (ctrl->wLength == 0)
|
|
ep0->dir_in = 1;
|
|
|
|
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
|
|
switch (ctrl->bRequest) {
|
|
case USB_REQ_SET_ADDRESS:
|
|
dcfg = readl(hsotg->regs + S3C_DCFG);
|
|
dcfg &= ~S3C_DCFG_DevAddr_MASK;
|
|
dcfg |= ctrl->wValue << S3C_DCFG_DevAddr_SHIFT;
|
|
writel(dcfg, hsotg->regs + S3C_DCFG);
|
|
|
|
dev_info(hsotg->dev, "new address %d\n", ctrl->wValue);
|
|
|
|
ret = s3c_hsotg_send_reply(hsotg, ep0, NULL, 0);
|
|
return;
|
|
|
|
case USB_REQ_GET_STATUS:
|
|
ret = s3c_hsotg_process_req_status(hsotg, ctrl);
|
|
break;
|
|
|
|
case USB_REQ_CLEAR_FEATURE:
|
|
case USB_REQ_SET_FEATURE:
|
|
ret = s3c_hsotg_process_req_feature(hsotg, ctrl);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* as a fallback, try delivering it to the driver to deal with */
|
|
|
|
if (ret == 0 && hsotg->driver) {
|
|
ret = hsotg->driver->setup(&hsotg->gadget, ctrl);
|
|
if (ret < 0)
|
|
dev_dbg(hsotg->dev, "driver->setup() ret %d\n", ret);
|
|
}
|
|
|
|
/* the request is either unhandlable, or is not formatted correctly
|
|
* so respond with a STALL for the status stage to indicate failure.
|
|
*/
|
|
|
|
if (ret < 0) {
|
|
u32 reg;
|
|
u32 ctrl;
|
|
|
|
dev_dbg(hsotg->dev, "ep0 stall (dir=%d)\n", ep0->dir_in);
|
|
reg = (ep0->dir_in) ? S3C_DIEPCTL0 : S3C_DOEPCTL0;
|
|
|
|
/* S3C_DxEPCTL_Stall will be cleared by EP once it has
|
|
* taken effect, so no need to clear later. */
|
|
|
|
ctrl = readl(hsotg->regs + reg);
|
|
ctrl |= S3C_DxEPCTL_Stall;
|
|
ctrl |= S3C_DxEPCTL_CNAK;
|
|
writel(ctrl, hsotg->regs + reg);
|
|
|
|
dev_dbg(hsotg->dev,
|
|
"written DxEPCTL=0x%08x to %08x (DxEPCTL=0x%08x)\n",
|
|
ctrl, reg, readl(hsotg->regs + reg));
|
|
|
|
/* don't believe we need to anything more to get the EP
|
|
* to reply with a STALL packet */
|
|
}
|
|
}
|
|
|
|
static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg);
|
|
|
|
/**
|
|
* s3c_hsotg_complete_setup - completion of a setup transfer
|
|
* @ep: The endpoint the request was on.
|
|
* @req: The request completed.
|
|
*
|
|
* Called on completion of any requests the driver itself submitted for
|
|
* EP0 setup packets
|
|
*/
|
|
static void s3c_hsotg_complete_setup(struct usb_ep *ep,
|
|
struct usb_request *req)
|
|
{
|
|
struct s3c_hsotg_ep *hs_ep = our_ep(ep);
|
|
struct s3c_hsotg *hsotg = hs_ep->parent;
|
|
|
|
if (req->status < 0) {
|
|
dev_dbg(hsotg->dev, "%s: failed %d\n", __func__, req->status);
|
|
return;
|
|
}
|
|
|
|
if (req->actual == 0)
|
|
s3c_hsotg_enqueue_setup(hsotg);
|
|
else
|
|
s3c_hsotg_process_control(hsotg, req->buf);
|
|
}
|
|
|
|
/**
|
|
* s3c_hsotg_enqueue_setup - start a request for EP0 packets
|
|
* @hsotg: The device state.
|
|
*
|
|
* Enqueue a request on EP0 if necessary to received any SETUP packets
|
|
* received from the host.
|
|
*/
|
|
static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg)
|
|
{
|
|
struct usb_request *req = hsotg->ctrl_req;
|
|
struct s3c_hsotg_req *hs_req = our_req(req);
|
|
int ret;
|
|
|
|
dev_dbg(hsotg->dev, "%s: queueing setup request\n", __func__);
|
|
|
|
req->zero = 0;
|
|
req->length = 8;
|
|
req->buf = hsotg->ctrl_buff;
|
|
req->complete = s3c_hsotg_complete_setup;
|
|
|
|
if (!list_empty(&hs_req->queue)) {
|
|
dev_dbg(hsotg->dev, "%s already queued???\n", __func__);
|
|
return;
|
|
}
|
|
|
|
hsotg->eps[0].dir_in = 0;
|
|
|
|
ret = s3c_hsotg_ep_queue(&hsotg->eps[0].ep, req, GFP_ATOMIC);
|
|
if (ret < 0) {
|
|
dev_err(hsotg->dev, "%s: failed queue (%d)\n", __func__, ret);
|
|
/* Don't think there's much we can do other than watch the
|
|
* driver fail. */
|
|
}
|
|
}
|
|
|
|
/**
|
|
* s3c_hsotg_complete_request - complete a request given to us
|
|
* @hsotg: The device state.
|
|
* @hs_ep: The endpoint the request was on.
|
|
* @hs_req: The request to complete.
|
|
* @result: The result code (0 => Ok, otherwise errno)
|
|
*
|
|
* The given request has finished, so call the necessary completion
|
|
* if it has one and then look to see if we can start a new request
|
|
* on the endpoint.
|
|
*
|
|
* Note, expects the ep to already be locked as appropriate.
|
|
*/
|
|
static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg,
|
|
struct s3c_hsotg_ep *hs_ep,
|
|
struct s3c_hsotg_req *hs_req,
|
|
int result)
|
|
{
|
|
bool restart;
|
|
|
|
if (!hs_req) {
|
|
dev_dbg(hsotg->dev, "%s: nothing to complete?\n", __func__);
|
|
return;
|
|
}
|
|
|
|
dev_dbg(hsotg->dev, "complete: ep %p %s, req %p, %d => %p\n",
|
|
hs_ep, hs_ep->ep.name, hs_req, result, hs_req->req.complete);
|
|
|
|
/* only replace the status if we've not already set an error
|
|
* from a previous transaction */
|
|
|
|
if (hs_req->req.status == -EINPROGRESS)
|
|
hs_req->req.status = result;
|
|
|
|
hs_ep->req = NULL;
|
|
list_del_init(&hs_req->queue);
|
|
|
|
if (using_dma(hsotg))
|
|
s3c_hsotg_unmap_dma(hsotg, hs_ep, hs_req);
|
|
|
|
/* call the complete request with the locks off, just in case the
|
|
* request tries to queue more work for this endpoint. */
|
|
|
|
if (hs_req->req.complete) {
|
|
spin_unlock(&hs_ep->lock);
|
|
hs_req->req.complete(&hs_ep->ep, &hs_req->req);
|
|
spin_lock(&hs_ep->lock);
|
|
}
|
|
|
|
/* Look to see if there is anything else to do. Note, the completion
|
|
* of the previous request may have caused a new request to be started
|
|
* so be careful when doing this. */
|
|
|
|
if (!hs_ep->req && result >= 0) {
|
|
restart = !list_empty(&hs_ep->queue);
|
|
if (restart) {
|
|
hs_req = get_ep_head(hs_ep);
|
|
s3c_hsotg_start_req(hsotg, hs_ep, hs_req, false);
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* s3c_hsotg_complete_request_lock - complete a request given to us (locked)
|
|
* @hsotg: The device state.
|
|
* @hs_ep: The endpoint the request was on.
|
|
* @hs_req: The request to complete.
|
|
* @result: The result code (0 => Ok, otherwise errno)
|
|
*
|
|
* See s3c_hsotg_complete_request(), but called with the endpoint's
|
|
* lock held.
|
|
*/
|
|
static void s3c_hsotg_complete_request_lock(struct s3c_hsotg *hsotg,
|
|
struct s3c_hsotg_ep *hs_ep,
|
|
struct s3c_hsotg_req *hs_req,
|
|
int result)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&hs_ep->lock, flags);
|
|
s3c_hsotg_complete_request(hsotg, hs_ep, hs_req, result);
|
|
spin_unlock_irqrestore(&hs_ep->lock, flags);
|
|
}
|
|
|
|
/**
|
|
* s3c_hsotg_rx_data - receive data from the FIFO for an endpoint
|
|
* @hsotg: The device state.
|
|
* @ep_idx: The endpoint index for the data
|
|
* @size: The size of data in the fifo, in bytes
|
|
*
|
|
* The FIFO status shows there is data to read from the FIFO for a given
|
|
* endpoint, so sort out whether we need to read the data into a request
|
|
* that has been made for that endpoint.
|
|
*/
|
|
static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size)
|
|
{
|
|
struct s3c_hsotg_ep *hs_ep = &hsotg->eps[ep_idx];
|
|
struct s3c_hsotg_req *hs_req = hs_ep->req;
|
|
void __iomem *fifo = hsotg->regs + S3C_EPFIFO(ep_idx);
|
|
int to_read;
|
|
int max_req;
|
|
int read_ptr;
|
|
|
|
if (!hs_req) {
|
|
u32 epctl = readl(hsotg->regs + S3C_DOEPCTL(ep_idx));
|
|
int ptr;
|
|
|
|
dev_warn(hsotg->dev,
|
|
"%s: FIFO %d bytes on ep%d but no req (DxEPCTl=0x%08x)\n",
|
|
__func__, size, ep_idx, epctl);
|
|
|
|
/* dump the data from the FIFO, we've nothing we can do */
|
|
for (ptr = 0; ptr < size; ptr += 4)
|
|
(void)readl(fifo);
|
|
|
|
return;
|
|
}
|
|
|
|
spin_lock(&hs_ep->lock);
|
|
|
|
to_read = size;
|
|
read_ptr = hs_req->req.actual;
|
|
max_req = hs_req->req.length - read_ptr;
|
|
|
|
dev_dbg(hsotg->dev, "%s: read %d/%d, done %d/%d\n",
|
|
__func__, to_read, max_req, read_ptr, hs_req->req.length);
|
|
|
|
if (to_read > max_req) {
|
|
/* more data appeared than we where willing
|
|
* to deal with in this request.
|
|
*/
|
|
|
|
/* currently we don't deal this */
|
|
WARN_ON_ONCE(1);
|
|
}
|
|
|
|
hs_ep->total_data += to_read;
|
|
hs_req->req.actual += to_read;
|
|
to_read = DIV_ROUND_UP(to_read, 4);
|
|
|
|
/* note, we might over-write the buffer end by 3 bytes depending on
|
|
* alignment of the data. */
|
|
readsl(fifo, hs_req->req.buf + read_ptr, to_read);
|
|
|
|
spin_unlock(&hs_ep->lock);
|
|
}
|
|
|
|
/**
|
|
* s3c_hsotg_send_zlp - send zero-length packet on control endpoint
|
|
* @hsotg: The device instance
|
|
* @req: The request currently on this endpoint
|
|
*
|
|
* Generate a zero-length IN packet request for terminating a SETUP
|
|
* transaction.
|
|
*
|
|
* Note, since we don't write any data to the TxFIFO, then it is
|
|
* currently believed that we do not need to wait for any space in
|
|
* the TxFIFO.
|
|
*/
|
|
static void s3c_hsotg_send_zlp(struct s3c_hsotg *hsotg,
|
|
struct s3c_hsotg_req *req)
|
|
{
|
|
u32 ctrl;
|
|
|
|
if (!req) {
|
|
dev_warn(hsotg->dev, "%s: no request?\n", __func__);
|
|
return;
|
|
}
|
|
|
|
if (req->req.length == 0) {
|
|
hsotg->eps[0].sent_zlp = 1;
|
|
s3c_hsotg_enqueue_setup(hsotg);
|
|
return;
|
|
}
|
|
|
|
hsotg->eps[0].dir_in = 1;
|
|
hsotg->eps[0].sent_zlp = 1;
|
|
|
|
dev_dbg(hsotg->dev, "sending zero-length packet\n");
|
|
|
|
/* issue a zero-sized packet to terminate this */
|
|
writel(S3C_DxEPTSIZ_MC(1) | S3C_DxEPTSIZ_PktCnt(1) |
|
|
S3C_DxEPTSIZ_XferSize(0), hsotg->regs + S3C_DIEPTSIZ(0));
|
|
|
|
ctrl = readl(hsotg->regs + S3C_DIEPCTL0);
|
|
ctrl |= S3C_DxEPCTL_CNAK; /* clear NAK set by core */
|
|
ctrl |= S3C_DxEPCTL_EPEna; /* ensure ep enabled */
|
|
ctrl |= S3C_DxEPCTL_USBActEp;
|
|
writel(ctrl, hsotg->regs + S3C_DIEPCTL0);
|
|
}
|
|
|
|
/**
|
|
* s3c_hsotg_handle_outdone - handle receiving OutDone/SetupDone from RXFIFO
|
|
* @hsotg: The device instance
|
|
* @epnum: The endpoint received from
|
|
* @was_setup: Set if processing a SetupDone event.
|
|
*
|
|
* The RXFIFO has delivered an OutDone event, which means that the data
|
|
* transfer for an OUT endpoint has been completed, either by a short
|
|
* packet or by the finish of a transfer.
|
|
*/
|
|
static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg,
|
|
int epnum, bool was_setup)
|
|
{
|
|
u32 epsize = readl(hsotg->regs + S3C_DOEPTSIZ(epnum));
|
|
struct s3c_hsotg_ep *hs_ep = &hsotg->eps[epnum];
|
|
struct s3c_hsotg_req *hs_req = hs_ep->req;
|
|
struct usb_request *req = &hs_req->req;
|
|
unsigned size_left = S3C_DxEPTSIZ_XferSize_GET(epsize);
|
|
int result = 0;
|
|
|
|
if (!hs_req) {
|
|
dev_dbg(hsotg->dev, "%s: no request active\n", __func__);
|
|
return;
|
|
}
|
|
|
|
if (using_dma(hsotg)) {
|
|
unsigned size_done;
|
|
|
|
/* Calculate the size of the transfer by checking how much
|
|
* is left in the endpoint size register and then working it
|
|
* out from the amount we loaded for the transfer.
|
|
*
|
|
* We need to do this as DMA pointers are always 32bit aligned
|
|
* so may overshoot/undershoot the transfer.
|
|
*/
|
|
|
|
size_done = hs_ep->size_loaded - size_left;
|
|
size_done += hs_ep->last_load;
|
|
|
|
req->actual = size_done;
|
|
}
|
|
|
|
/* if there is more request to do, schedule new transfer */
|
|
if (req->actual < req->length && size_left == 0) {
|
|
s3c_hsotg_start_req(hsotg, hs_ep, hs_req, true);
|
|
return;
|
|
}
|
|
|
|
if (req->actual < req->length && req->short_not_ok) {
|
|
dev_dbg(hsotg->dev, "%s: got %d/%d (short not ok) => error\n",
|
|
__func__, req->actual, req->length);
|
|
|
|
/* todo - what should we return here? there's no one else
|
|
* even bothering to check the status. */
|
|
}
|
|
|
|
if (epnum == 0) {
|
|
if (!was_setup && req->complete != s3c_hsotg_complete_setup)
|
|
s3c_hsotg_send_zlp(hsotg, hs_req);
|
|
}
|
|
|
|
s3c_hsotg_complete_request_lock(hsotg, hs_ep, hs_req, result);
|
|
}
|
|
|
|
/**
|
|
* s3c_hsotg_read_frameno - read current frame number
|
|
* @hsotg: The device instance
|
|
*
|
|
* Return the current frame number
|
|
*/
|
|
static u32 s3c_hsotg_read_frameno(struct s3c_hsotg *hsotg)
|
|
{
|
|
u32 dsts;
|
|
|
|
dsts = readl(hsotg->regs + S3C_DSTS);
|
|
dsts &= S3C_DSTS_SOFFN_MASK;
|
|
dsts >>= S3C_DSTS_SOFFN_SHIFT;
|
|
|
|
return dsts;
|
|
}
|
|
|
|
/**
|
|
* s3c_hsotg_handle_rx - RX FIFO has data
|
|
* @hsotg: The device instance
|
|
*
|
|
* The IRQ handler has detected that the RX FIFO has some data in it
|
|
* that requires processing, so find out what is in there and do the
|
|
* appropriate read.
|
|
*
|
|
* The RXFIFO is a true FIFO, the packets coming out are still in packet
|
|
* chunks, so if you have x packets received on an endpoint you'll get x
|
|
* FIFO events delivered, each with a packet's worth of data in it.
|
|
*
|
|
* When using DMA, we should not be processing events from the RXFIFO
|
|
* as the actual data should be sent to the memory directly and we turn
|
|
* on the completion interrupts to get notifications of transfer completion.
|
|
*/
|
|
static void s3c_hsotg_handle_rx(struct s3c_hsotg *hsotg)
|
|
{
|
|
u32 grxstsr = readl(hsotg->regs + S3C_GRXSTSP);
|
|
u32 epnum, status, size;
|
|
|
|
WARN_ON(using_dma(hsotg));
|
|
|
|
epnum = grxstsr & S3C_GRXSTS_EPNum_MASK;
|
|
status = grxstsr & S3C_GRXSTS_PktSts_MASK;
|
|
|
|
size = grxstsr & S3C_GRXSTS_ByteCnt_MASK;
|
|
size >>= S3C_GRXSTS_ByteCnt_SHIFT;
|
|
|
|
if (1)
|
|
dev_dbg(hsotg->dev, "%s: GRXSTSP=0x%08x (%d@%d)\n",
|
|
__func__, grxstsr, size, epnum);
|
|
|
|
#define __status(x) ((x) >> S3C_GRXSTS_PktSts_SHIFT)
|
|
|
|
switch (status >> S3C_GRXSTS_PktSts_SHIFT) {
|
|
case __status(S3C_GRXSTS_PktSts_GlobalOutNAK):
|
|
dev_dbg(hsotg->dev, "GlobalOutNAK\n");
|
|
break;
|
|
|
|
case __status(S3C_GRXSTS_PktSts_OutDone):
|
|
dev_dbg(hsotg->dev, "OutDone (Frame=0x%08x)\n",
|
|
s3c_hsotg_read_frameno(hsotg));
|
|
|
|
if (!using_dma(hsotg))
|
|
s3c_hsotg_handle_outdone(hsotg, epnum, false);
|
|
break;
|
|
|
|
case __status(S3C_GRXSTS_PktSts_SetupDone):
|
|
dev_dbg(hsotg->dev,
|
|
"SetupDone (Frame=0x%08x, DOPEPCTL=0x%08x)\n",
|
|
s3c_hsotg_read_frameno(hsotg),
|
|
readl(hsotg->regs + S3C_DOEPCTL(0)));
|
|
|
|
s3c_hsotg_handle_outdone(hsotg, epnum, true);
|
|
break;
|
|
|
|
case __status(S3C_GRXSTS_PktSts_OutRX):
|
|
s3c_hsotg_rx_data(hsotg, epnum, size);
|
|
break;
|
|
|
|
case __status(S3C_GRXSTS_PktSts_SetupRX):
|
|
dev_dbg(hsotg->dev,
|
|
"SetupRX (Frame=0x%08x, DOPEPCTL=0x%08x)\n",
|
|
s3c_hsotg_read_frameno(hsotg),
|
|
readl(hsotg->regs + S3C_DOEPCTL(0)));
|
|
|
|
s3c_hsotg_rx_data(hsotg, epnum, size);
|
|
break;
|
|
|
|
default:
|
|
dev_warn(hsotg->dev, "%s: unknown status %08x\n",
|
|
__func__, grxstsr);
|
|
|
|
s3c_hsotg_dump(hsotg);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* s3c_hsotg_ep0_mps - turn max packet size into register setting
|
|
* @mps: The maximum packet size in bytes.
|
|
*/
|
|
static u32 s3c_hsotg_ep0_mps(unsigned int mps)
|
|
{
|
|
switch (mps) {
|
|
case 64:
|
|
return S3C_D0EPCTL_MPS_64;
|
|
case 32:
|
|
return S3C_D0EPCTL_MPS_32;
|
|
case 16:
|
|
return S3C_D0EPCTL_MPS_16;
|
|
case 8:
|
|
return S3C_D0EPCTL_MPS_8;
|
|
}
|
|
|
|
/* bad max packet size, warn and return invalid result */
|
|
WARN_ON(1);
|
|
return (u32)-1;
|
|
}
|
|
|
|
/**
|
|
* s3c_hsotg_set_ep_maxpacket - set endpoint's max-packet field
|
|
* @hsotg: The driver state.
|
|
* @ep: The index number of the endpoint
|
|
* @mps: The maximum packet size in bytes
|
|
*
|
|
* Configure the maximum packet size for the given endpoint, updating
|
|
* the hardware control registers to reflect this.
|
|
*/
|
|
static void s3c_hsotg_set_ep_maxpacket(struct s3c_hsotg *hsotg,
|
|
unsigned int ep, unsigned int mps)
|
|
{
|
|
struct s3c_hsotg_ep *hs_ep = &hsotg->eps[ep];
|
|
void __iomem *regs = hsotg->regs;
|
|
u32 mpsval;
|
|
u32 reg;
|
|
|
|
if (ep == 0) {
|
|
/* EP0 is a special case */
|
|
mpsval = s3c_hsotg_ep0_mps(mps);
|
|
if (mpsval > 3)
|
|
goto bad_mps;
|
|
} else {
|
|
if (mps >= S3C_DxEPCTL_MPS_LIMIT+1)
|
|
goto bad_mps;
|
|
|
|
mpsval = mps;
|
|
}
|
|
|
|
hs_ep->ep.maxpacket = mps;
|
|
|
|
/* update both the in and out endpoint controldir_ registers, even
|
|
* if one of the directions may not be in use. */
|
|
|
|
reg = readl(regs + S3C_DIEPCTL(ep));
|
|
reg &= ~S3C_DxEPCTL_MPS_MASK;
|
|
reg |= mpsval;
|
|
writel(reg, regs + S3C_DIEPCTL(ep));
|
|
|
|
reg = readl(regs + S3C_DOEPCTL(ep));
|
|
reg &= ~S3C_DxEPCTL_MPS_MASK;
|
|
reg |= mpsval;
|
|
writel(reg, regs + S3C_DOEPCTL(ep));
|
|
|
|
return;
|
|
|
|
bad_mps:
|
|
dev_err(hsotg->dev, "ep%d: bad mps of %d\n", ep, mps);
|
|
}
|
|
|
|
/**
|
|
* s3c_hsotg_txfifo_flush - flush Tx FIFO
|
|
* @hsotg: The driver state
|
|
* @idx: The index for the endpoint (0..15)
|
|
*/
|
|
static void s3c_hsotg_txfifo_flush(struct s3c_hsotg *hsotg, unsigned int idx)
|
|
{
|
|
int timeout;
|
|
int val;
|
|
|
|
writel(S3C_GRSTCTL_TxFNum(idx) | S3C_GRSTCTL_TxFFlsh,
|
|
hsotg->regs + S3C_GRSTCTL);
|
|
|
|
/* wait until the fifo is flushed */
|
|
timeout = 100;
|
|
|
|
while (1) {
|
|
val = readl(hsotg->regs + S3C_GRSTCTL);
|
|
|
|
if ((val & (S3C_GRSTCTL_TxFFlsh)) == 0)
|
|
break;
|
|
|
|
if (--timeout == 0) {
|
|
dev_err(hsotg->dev,
|
|
"%s: timeout flushing fifo (GRSTCTL=%08x)\n",
|
|
__func__, val);
|
|
}
|
|
|
|
udelay(1);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* s3c_hsotg_trytx - check to see if anything needs transmitting
|
|
* @hsotg: The driver state
|
|
* @hs_ep: The driver endpoint to check.
|
|
*
|
|
* Check to see if there is a request that has data to send, and if so
|
|
* make an attempt to write data into the FIFO.
|
|
*/
|
|
static int s3c_hsotg_trytx(struct s3c_hsotg *hsotg,
|
|
struct s3c_hsotg_ep *hs_ep)
|
|
{
|
|
struct s3c_hsotg_req *hs_req = hs_ep->req;
|
|
|
|
if (!hs_ep->dir_in || !hs_req)
|
|
return 0;
|
|
|
|
if (hs_req->req.actual < hs_req->req.length) {
|
|
dev_dbg(hsotg->dev, "trying to write more for ep%d\n",
|
|
hs_ep->index);
|
|
return s3c_hsotg_write_fifo(hsotg, hs_ep, hs_req);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* s3c_hsotg_complete_in - complete IN transfer
|
|
* @hsotg: The device state.
|
|
* @hs_ep: The endpoint that has just completed.
|
|
*
|
|
* An IN transfer has been completed, update the transfer's state and then
|
|
* call the relevant completion routines.
|
|
*/
|
|
static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg,
|
|
struct s3c_hsotg_ep *hs_ep)
|
|
{
|
|
struct s3c_hsotg_req *hs_req = hs_ep->req;
|
|
u32 epsize = readl(hsotg->regs + S3C_DIEPTSIZ(hs_ep->index));
|
|
int size_left, size_done;
|
|
|
|
if (!hs_req) {
|
|
dev_dbg(hsotg->dev, "XferCompl but no req\n");
|
|
return;
|
|
}
|
|
|
|
/* Calculate the size of the transfer by checking how much is left
|
|
* in the endpoint size register and then working it out from
|
|
* the amount we loaded for the transfer.
|
|
*
|
|
* We do this even for DMA, as the transfer may have incremented
|
|
* past the end of the buffer (DMA transfers are always 32bit
|
|
* aligned).
|
|
*/
|
|
|
|
size_left = S3C_DxEPTSIZ_XferSize_GET(epsize);
|
|
|
|
size_done = hs_ep->size_loaded - size_left;
|
|
size_done += hs_ep->last_load;
|
|
|
|
if (hs_req->req.actual != size_done)
|
|
dev_dbg(hsotg->dev, "%s: adjusting size done %d => %d\n",
|
|
__func__, hs_req->req.actual, size_done);
|
|
|
|
hs_req->req.actual = size_done;
|
|
|
|
/* if we did all of the transfer, and there is more data left
|
|
* around, then try restarting the rest of the request */
|
|
|
|
if (!size_left && hs_req->req.actual < hs_req->req.length) {
|
|
dev_dbg(hsotg->dev, "%s trying more for req...\n", __func__);
|
|
s3c_hsotg_start_req(hsotg, hs_ep, hs_req, true);
|
|
} else
|
|
s3c_hsotg_complete_request_lock(hsotg, hs_ep, hs_req, 0);
|
|
}
|
|
|
|
/**
|
|
* s3c_hsotg_epint - handle an in/out endpoint interrupt
|
|
* @hsotg: The driver state
|
|
* @idx: The index for the endpoint (0..15)
|
|
* @dir_in: Set if this is an IN endpoint
|
|
*
|
|
* Process and clear any interrupt pending for an individual endpoint
|
|
*/
|
|
static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx,
|
|
int dir_in)
|
|
{
|
|
struct s3c_hsotg_ep *hs_ep = &hsotg->eps[idx];
|
|
u32 epint_reg = dir_in ? S3C_DIEPINT(idx) : S3C_DOEPINT(idx);
|
|
u32 epctl_reg = dir_in ? S3C_DIEPCTL(idx) : S3C_DOEPCTL(idx);
|
|
u32 epsiz_reg = dir_in ? S3C_DIEPTSIZ(idx) : S3C_DOEPTSIZ(idx);
|
|
u32 ints;
|
|
|
|
ints = readl(hsotg->regs + epint_reg);
|
|
|
|
/* Clear endpoint interrupts */
|
|
writel(ints, hsotg->regs + epint_reg);
|
|
|
|
dev_dbg(hsotg->dev, "%s: ep%d(%s) DxEPINT=0x%08x\n",
|
|
__func__, idx, dir_in ? "in" : "out", ints);
|
|
|
|
if (ints & S3C_DxEPINT_XferCompl) {
|
|
dev_dbg(hsotg->dev,
|
|
"%s: XferCompl: DxEPCTL=0x%08x, DxEPTSIZ=%08x\n",
|
|
__func__, readl(hsotg->regs + epctl_reg),
|
|
readl(hsotg->regs + epsiz_reg));
|
|
|
|
/* we get OutDone from the FIFO, so we only need to look
|
|
* at completing IN requests here */
|
|
if (dir_in) {
|
|
s3c_hsotg_complete_in(hsotg, hs_ep);
|
|
|
|
if (idx == 0 && !hs_ep->req)
|
|
s3c_hsotg_enqueue_setup(hsotg);
|
|
} else if (using_dma(hsotg)) {
|
|
/* We're using DMA, we need to fire an OutDone here
|
|
* as we ignore the RXFIFO. */
|
|
|
|
s3c_hsotg_handle_outdone(hsotg, idx, false);
|
|
}
|
|
}
|
|
|
|
if (ints & S3C_DxEPINT_EPDisbld) {
|
|
dev_dbg(hsotg->dev, "%s: EPDisbld\n", __func__);
|
|
|
|
if (dir_in) {
|
|
int epctl = readl(hsotg->regs + epctl_reg);
|
|
|
|
s3c_hsotg_txfifo_flush(hsotg, idx);
|
|
|
|
if ((epctl & S3C_DxEPCTL_Stall) &&
|
|
(epctl & S3C_DxEPCTL_EPType_Bulk)) {
|
|
int dctl = readl(hsotg->regs + S3C_DCTL);
|
|
|
|
dctl |= S3C_DCTL_CGNPInNAK;
|
|
writel(dctl, hsotg->regs + S3C_DCTL);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (ints & S3C_DxEPINT_AHBErr)
|
|
dev_dbg(hsotg->dev, "%s: AHBErr\n", __func__);
|
|
|
|
if (ints & S3C_DxEPINT_Setup) { /* Setup or Timeout */
|
|
dev_dbg(hsotg->dev, "%s: Setup/Timeout\n", __func__);
|
|
|
|
if (using_dma(hsotg) && idx == 0) {
|
|
/* this is the notification we've received a
|
|
* setup packet. In non-DMA mode we'd get this
|
|
* from the RXFIFO, instead we need to process
|
|
* the setup here. */
|
|
|
|
if (dir_in)
|
|
WARN_ON_ONCE(1);
|
|
else
|
|
s3c_hsotg_handle_outdone(hsotg, 0, true);
|
|
}
|
|
}
|
|
|
|
if (ints & S3C_DxEPINT_Back2BackSetup)
|
|
dev_dbg(hsotg->dev, "%s: B2BSetup/INEPNakEff\n", __func__);
|
|
|
|
if (dir_in) {
|
|
/* not sure if this is important, but we'll clear it anyway
|
|
*/
|
|
if (ints & S3C_DIEPMSK_INTknTXFEmpMsk) {
|
|
dev_dbg(hsotg->dev, "%s: ep%d: INTknTXFEmpMsk\n",
|
|
__func__, idx);
|
|
}
|
|
|
|
/* this probably means something bad is happening */
|
|
if (ints & S3C_DIEPMSK_INTknEPMisMsk) {
|
|
dev_warn(hsotg->dev, "%s: ep%d: INTknEP\n",
|
|
__func__, idx);
|
|
}
|
|
|
|
/* FIFO has space or is empty (see GAHBCFG) */
|
|
if (hsotg->dedicated_fifos &&
|
|
ints & S3C_DIEPMSK_TxFIFOEmpty) {
|
|
dev_dbg(hsotg->dev, "%s: ep%d: TxFIFOEmpty\n",
|
|
__func__, idx);
|
|
s3c_hsotg_trytx(hsotg, hs_ep);
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* s3c_hsotg_irq_enumdone - Handle EnumDone interrupt (enumeration done)
|
|
* @hsotg: The device state.
|
|
*
|
|
* Handle updating the device settings after the enumeration phase has
|
|
* been completed.
|
|
*/
|
|
static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg)
|
|
{
|
|
u32 dsts = readl(hsotg->regs + S3C_DSTS);
|
|
int ep0_mps = 0, ep_mps;
|
|
|
|
/* This should signal the finish of the enumeration phase
|
|
* of the USB handshaking, so we should now know what rate
|
|
* we connected at. */
|
|
|
|
dev_dbg(hsotg->dev, "EnumDone (DSTS=0x%08x)\n", dsts);
|
|
|
|
/* note, since we're limited by the size of transfer on EP0, and
|
|
* it seems IN transfers must be a even number of packets we do
|
|
* not advertise a 64byte MPS on EP0. */
|
|
|
|
/* catch both EnumSpd_FS and EnumSpd_FS48 */
|
|
switch (dsts & S3C_DSTS_EnumSpd_MASK) {
|
|
case S3C_DSTS_EnumSpd_FS:
|
|
case S3C_DSTS_EnumSpd_FS48:
|
|
hsotg->gadget.speed = USB_SPEED_FULL;
|
|
ep0_mps = EP0_MPS_LIMIT;
|
|
ep_mps = 64;
|
|
break;
|
|
|
|
case S3C_DSTS_EnumSpd_HS:
|
|
hsotg->gadget.speed = USB_SPEED_HIGH;
|
|
ep0_mps = EP0_MPS_LIMIT;
|
|
ep_mps = 512;
|
|
break;
|
|
|
|
case S3C_DSTS_EnumSpd_LS:
|
|
hsotg->gadget.speed = USB_SPEED_LOW;
|
|
/* note, we don't actually support LS in this driver at the
|
|
* moment, and the documentation seems to imply that it isn't
|
|
* supported by the PHYs on some of the devices.
|
|
*/
|
|
break;
|
|
}
|
|
dev_info(hsotg->dev, "new device is %s\n",
|
|
usb_speed_string(hsotg->gadget.speed));
|
|
|
|
/* we should now know the maximum packet size for an
|
|
* endpoint, so set the endpoints to a default value. */
|
|
|
|
if (ep0_mps) {
|
|
int i;
|
|
s3c_hsotg_set_ep_maxpacket(hsotg, 0, ep0_mps);
|
|
for (i = 1; i < S3C_HSOTG_EPS; i++)
|
|
s3c_hsotg_set_ep_maxpacket(hsotg, i, ep_mps);
|
|
}
|
|
|
|
/* ensure after enumeration our EP0 is active */
|
|
|
|
s3c_hsotg_enqueue_setup(hsotg);
|
|
|
|
dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
|
|
readl(hsotg->regs + S3C_DIEPCTL0),
|
|
readl(hsotg->regs + S3C_DOEPCTL0));
|
|
}
|
|
|
|
/**
|
|
* kill_all_requests - remove all requests from the endpoint's queue
|
|
* @hsotg: The device state.
|
|
* @ep: The endpoint the requests may be on.
|
|
* @result: The result code to use.
|
|
* @force: Force removal of any current requests
|
|
*
|
|
* Go through the requests on the given endpoint and mark them
|
|
* completed with the given result code.
|
|
*/
|
|
static void kill_all_requests(struct s3c_hsotg *hsotg,
|
|
struct s3c_hsotg_ep *ep,
|
|
int result, bool force)
|
|
{
|
|
struct s3c_hsotg_req *req, *treq;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&ep->lock, flags);
|
|
|
|
list_for_each_entry_safe(req, treq, &ep->queue, queue) {
|
|
/* currently, we can't do much about an already
|
|
* running request on an in endpoint */
|
|
|
|
if (ep->req == req && ep->dir_in && !force)
|
|
continue;
|
|
|
|
s3c_hsotg_complete_request(hsotg, ep, req,
|
|
result);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&ep->lock, flags);
|
|
}
|
|
|
|
#define call_gadget(_hs, _entry) \
|
|
if ((_hs)->gadget.speed != USB_SPEED_UNKNOWN && \
|
|
(_hs)->driver && (_hs)->driver->_entry) \
|
|
(_hs)->driver->_entry(&(_hs)->gadget);
|
|
|
|
/**
|
|
* s3c_hsotg_disconnect_irq - disconnect irq service
|
|
* @hsotg: The device state.
|
|
*
|
|
* A disconnect IRQ has been received, meaning that the host has
|
|
* lost contact with the bus. Remove all current transactions
|
|
* and signal the gadget driver that this has happened.
|
|
*/
|
|
static void s3c_hsotg_disconnect_irq(struct s3c_hsotg *hsotg)
|
|
{
|
|
unsigned ep;
|
|
|
|
for (ep = 0; ep < S3C_HSOTG_EPS; ep++)
|
|
kill_all_requests(hsotg, &hsotg->eps[ep], -ESHUTDOWN, true);
|
|
|
|
call_gadget(hsotg, disconnect);
|
|
}
|
|
|
|
/**
|
|
* s3c_hsotg_irq_fifoempty - TX FIFO empty interrupt handler
|
|
* @hsotg: The device state:
|
|
* @periodic: True if this is a periodic FIFO interrupt
|
|
*/
|
|
static void s3c_hsotg_irq_fifoempty(struct s3c_hsotg *hsotg, bool periodic)
|
|
{
|
|
struct s3c_hsotg_ep *ep;
|
|
int epno, ret;
|
|
|
|
/* look through for any more data to transmit */
|
|
|
|
for (epno = 0; epno < S3C_HSOTG_EPS; epno++) {
|
|
ep = &hsotg->eps[epno];
|
|
|
|
if (!ep->dir_in)
|
|
continue;
|
|
|
|
if ((periodic && !ep->periodic) ||
|
|
(!periodic && ep->periodic))
|
|
continue;
|
|
|
|
ret = s3c_hsotg_trytx(hsotg, ep);
|
|
if (ret < 0)
|
|
break;
|
|
}
|
|
}
|
|
|
|
static struct s3c_hsotg *our_hsotg;
|
|
|
|
/* IRQ flags which will trigger a retry around the IRQ loop */
|
|
#define IRQ_RETRY_MASK (S3C_GINTSTS_NPTxFEmp | \
|
|
S3C_GINTSTS_PTxFEmp | \
|
|
S3C_GINTSTS_RxFLvl)
|
|
|
|
/**
|
|
* s3c_hsotg_irq - handle device interrupt
|
|
* @irq: The IRQ number triggered
|
|
* @pw: The pw value when registered the handler.
|
|
*/
|
|
static irqreturn_t s3c_hsotg_irq(int irq, void *pw)
|
|
{
|
|
struct s3c_hsotg *hsotg = pw;
|
|
int retry_count = 8;
|
|
u32 gintsts;
|
|
u32 gintmsk;
|
|
|
|
irq_retry:
|
|
gintsts = readl(hsotg->regs + S3C_GINTSTS);
|
|
gintmsk = readl(hsotg->regs + S3C_GINTMSK);
|
|
|
|
dev_dbg(hsotg->dev, "%s: %08x %08x (%08x) retry %d\n",
|
|
__func__, gintsts, gintsts & gintmsk, gintmsk, retry_count);
|
|
|
|
gintsts &= gintmsk;
|
|
|
|
if (gintsts & S3C_GINTSTS_OTGInt) {
|
|
u32 otgint = readl(hsotg->regs + S3C_GOTGINT);
|
|
|
|
dev_info(hsotg->dev, "OTGInt: %08x\n", otgint);
|
|
|
|
writel(otgint, hsotg->regs + S3C_GOTGINT);
|
|
}
|
|
|
|
if (gintsts & S3C_GINTSTS_DisconnInt) {
|
|
dev_dbg(hsotg->dev, "%s: DisconnInt\n", __func__);
|
|
writel(S3C_GINTSTS_DisconnInt, hsotg->regs + S3C_GINTSTS);
|
|
|
|
s3c_hsotg_disconnect_irq(hsotg);
|
|
}
|
|
|
|
if (gintsts & S3C_GINTSTS_SessReqInt) {
|
|
dev_dbg(hsotg->dev, "%s: SessReqInt\n", __func__);
|
|
writel(S3C_GINTSTS_SessReqInt, hsotg->regs + S3C_GINTSTS);
|
|
}
|
|
|
|
if (gintsts & S3C_GINTSTS_EnumDone) {
|
|
writel(S3C_GINTSTS_EnumDone, hsotg->regs + S3C_GINTSTS);
|
|
|
|
s3c_hsotg_irq_enumdone(hsotg);
|
|
}
|
|
|
|
if (gintsts & S3C_GINTSTS_ConIDStsChng) {
|
|
dev_dbg(hsotg->dev, "ConIDStsChg (DSTS=0x%08x, GOTCTL=%08x)\n",
|
|
readl(hsotg->regs + S3C_DSTS),
|
|
readl(hsotg->regs + S3C_GOTGCTL));
|
|
|
|
writel(S3C_GINTSTS_ConIDStsChng, hsotg->regs + S3C_GINTSTS);
|
|
}
|
|
|
|
if (gintsts & (S3C_GINTSTS_OEPInt | S3C_GINTSTS_IEPInt)) {
|
|
u32 daint = readl(hsotg->regs + S3C_DAINT);
|
|
u32 daint_out = daint >> S3C_DAINT_OutEP_SHIFT;
|
|
u32 daint_in = daint & ~(daint_out << S3C_DAINT_OutEP_SHIFT);
|
|
int ep;
|
|
|
|
dev_dbg(hsotg->dev, "%s: daint=%08x\n", __func__, daint);
|
|
|
|
for (ep = 0; ep < 15 && daint_out; ep++, daint_out >>= 1) {
|
|
if (daint_out & 1)
|
|
s3c_hsotg_epint(hsotg, ep, 0);
|
|
}
|
|
|
|
for (ep = 0; ep < 15 && daint_in; ep++, daint_in >>= 1) {
|
|
if (daint_in & 1)
|
|
s3c_hsotg_epint(hsotg, ep, 1);
|
|
}
|
|
}
|
|
|
|
if (gintsts & S3C_GINTSTS_USBRst) {
|
|
dev_info(hsotg->dev, "%s: USBRst\n", __func__);
|
|
dev_dbg(hsotg->dev, "GNPTXSTS=%08x\n",
|
|
readl(hsotg->regs + S3C_GNPTXSTS));
|
|
|
|
writel(S3C_GINTSTS_USBRst, hsotg->regs + S3C_GINTSTS);
|
|
|
|
kill_all_requests(hsotg, &hsotg->eps[0], -ECONNRESET, true);
|
|
|
|
/* it seems after a reset we can end up with a situation
|
|
* where the TXFIFO still has data in it... the docs
|
|
* suggest resetting all the fifos, so use the init_fifo
|
|
* code to relayout and flush the fifos.
|
|
*/
|
|
|
|
s3c_hsotg_init_fifo(hsotg);
|
|
|
|
s3c_hsotg_enqueue_setup(hsotg);
|
|
}
|
|
|
|
/* check both FIFOs */
|
|
|
|
if (gintsts & S3C_GINTSTS_NPTxFEmp) {
|
|
dev_dbg(hsotg->dev, "NPTxFEmp\n");
|
|
|
|
/* Disable the interrupt to stop it happening again
|
|
* unless one of these endpoint routines decides that
|
|
* it needs re-enabling */
|
|
|
|
s3c_hsotg_disable_gsint(hsotg, S3C_GINTSTS_NPTxFEmp);
|
|
s3c_hsotg_irq_fifoempty(hsotg, false);
|
|
}
|
|
|
|
if (gintsts & S3C_GINTSTS_PTxFEmp) {
|
|
dev_dbg(hsotg->dev, "PTxFEmp\n");
|
|
|
|
/* See note in S3C_GINTSTS_NPTxFEmp */
|
|
|
|
s3c_hsotg_disable_gsint(hsotg, S3C_GINTSTS_PTxFEmp);
|
|
s3c_hsotg_irq_fifoempty(hsotg, true);
|
|
}
|
|
|
|
if (gintsts & S3C_GINTSTS_RxFLvl) {
|
|
/* note, since GINTSTS_RxFLvl doubles as FIFO-not-empty,
|
|
* we need to retry s3c_hsotg_handle_rx if this is still
|
|
* set. */
|
|
|
|
s3c_hsotg_handle_rx(hsotg);
|
|
}
|
|
|
|
if (gintsts & S3C_GINTSTS_ModeMis) {
|
|
dev_warn(hsotg->dev, "warning, mode mismatch triggered\n");
|
|
writel(S3C_GINTSTS_ModeMis, hsotg->regs + S3C_GINTSTS);
|
|
}
|
|
|
|
if (gintsts & S3C_GINTSTS_USBSusp) {
|
|
dev_info(hsotg->dev, "S3C_GINTSTS_USBSusp\n");
|
|
writel(S3C_GINTSTS_USBSusp, hsotg->regs + S3C_GINTSTS);
|
|
|
|
call_gadget(hsotg, suspend);
|
|
}
|
|
|
|
if (gintsts & S3C_GINTSTS_WkUpInt) {
|
|
dev_info(hsotg->dev, "S3C_GINTSTS_WkUpIn\n");
|
|
writel(S3C_GINTSTS_WkUpInt, hsotg->regs + S3C_GINTSTS);
|
|
|
|
call_gadget(hsotg, resume);
|
|
}
|
|
|
|
if (gintsts & S3C_GINTSTS_ErlySusp) {
|
|
dev_dbg(hsotg->dev, "S3C_GINTSTS_ErlySusp\n");
|
|
writel(S3C_GINTSTS_ErlySusp, hsotg->regs + S3C_GINTSTS);
|
|
}
|
|
|
|
/* these next two seem to crop-up occasionally causing the core
|
|
* to shutdown the USB transfer, so try clearing them and logging
|
|
* the occurrence. */
|
|
|
|
if (gintsts & S3C_GINTSTS_GOUTNakEff) {
|
|
dev_info(hsotg->dev, "GOUTNakEff triggered\n");
|
|
|
|
writel(S3C_DCTL_CGOUTNak, hsotg->regs + S3C_DCTL);
|
|
|
|
s3c_hsotg_dump(hsotg);
|
|
}
|
|
|
|
if (gintsts & S3C_GINTSTS_GINNakEff) {
|
|
dev_info(hsotg->dev, "GINNakEff triggered\n");
|
|
|
|
writel(S3C_DCTL_CGNPInNAK, hsotg->regs + S3C_DCTL);
|
|
|
|
s3c_hsotg_dump(hsotg);
|
|
}
|
|
|
|
/* if we've had fifo events, we should try and go around the
|
|
* loop again to see if there's any point in returning yet. */
|
|
|
|
if (gintsts & IRQ_RETRY_MASK && --retry_count > 0)
|
|
goto irq_retry;
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/**
|
|
* s3c_hsotg_ep_enable - enable the given endpoint
|
|
* @ep: The USB endpint to configure
|
|
* @desc: The USB endpoint descriptor to configure with.
|
|
*
|
|
* This is called from the USB gadget code's usb_ep_enable().
|
|
*/
|
|
static int s3c_hsotg_ep_enable(struct usb_ep *ep,
|
|
const struct usb_endpoint_descriptor *desc)
|
|
{
|
|
struct s3c_hsotg_ep *hs_ep = our_ep(ep);
|
|
struct s3c_hsotg *hsotg = hs_ep->parent;
|
|
unsigned long flags;
|
|
int index = hs_ep->index;
|
|
u32 epctrl_reg;
|
|
u32 epctrl;
|
|
u32 mps;
|
|
int dir_in;
|
|
int ret = 0;
|
|
|
|
dev_dbg(hsotg->dev,
|
|
"%s: ep %s: a 0x%02x, attr 0x%02x, mps 0x%04x, intr %d\n",
|
|
__func__, ep->name, desc->bEndpointAddress, desc->bmAttributes,
|
|
desc->wMaxPacketSize, desc->bInterval);
|
|
|
|
/* not to be called for EP0 */
|
|
WARN_ON(index == 0);
|
|
|
|
dir_in = (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ? 1 : 0;
|
|
if (dir_in != hs_ep->dir_in) {
|
|
dev_err(hsotg->dev, "%s: direction mismatch!\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
mps = usb_endpoint_maxp(desc);
|
|
|
|
/* note, we handle this here instead of s3c_hsotg_set_ep_maxpacket */
|
|
|
|
epctrl_reg = dir_in ? S3C_DIEPCTL(index) : S3C_DOEPCTL(index);
|
|
epctrl = readl(hsotg->regs + epctrl_reg);
|
|
|
|
dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x from 0x%08x\n",
|
|
__func__, epctrl, epctrl_reg);
|
|
|
|
spin_lock_irqsave(&hs_ep->lock, flags);
|
|
|
|
epctrl &= ~(S3C_DxEPCTL_EPType_MASK | S3C_DxEPCTL_MPS_MASK);
|
|
epctrl |= S3C_DxEPCTL_MPS(mps);
|
|
|
|
/* mark the endpoint as active, otherwise the core may ignore
|
|
* transactions entirely for this endpoint */
|
|
epctrl |= S3C_DxEPCTL_USBActEp;
|
|
|
|
/* set the NAK status on the endpoint, otherwise we might try and
|
|
* do something with data that we've yet got a request to process
|
|
* since the RXFIFO will take data for an endpoint even if the
|
|
* size register hasn't been set.
|
|
*/
|
|
|
|
epctrl |= S3C_DxEPCTL_SNAK;
|
|
|
|
/* update the endpoint state */
|
|
hs_ep->ep.maxpacket = mps;
|
|
|
|
/* default, set to non-periodic */
|
|
hs_ep->periodic = 0;
|
|
|
|
switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
|
|
case USB_ENDPOINT_XFER_ISOC:
|
|
dev_err(hsotg->dev, "no current ISOC support\n");
|
|
ret = -EINVAL;
|
|
goto out;
|
|
|
|
case USB_ENDPOINT_XFER_BULK:
|
|
epctrl |= S3C_DxEPCTL_EPType_Bulk;
|
|
break;
|
|
|
|
case USB_ENDPOINT_XFER_INT:
|
|
if (dir_in) {
|
|
/* Allocate our TxFNum by simply using the index
|
|
* of the endpoint for the moment. We could do
|
|
* something better if the host indicates how
|
|
* many FIFOs we are expecting to use. */
|
|
|
|
hs_ep->periodic = 1;
|
|
epctrl |= S3C_DxEPCTL_TxFNum(index);
|
|
}
|
|
|
|
epctrl |= S3C_DxEPCTL_EPType_Intterupt;
|
|
break;
|
|
|
|
case USB_ENDPOINT_XFER_CONTROL:
|
|
epctrl |= S3C_DxEPCTL_EPType_Control;
|
|
break;
|
|
}
|
|
|
|
/* if the hardware has dedicated fifos, we must give each IN EP
|
|
* a unique tx-fifo even if it is non-periodic.
|
|
*/
|
|
if (dir_in && hsotg->dedicated_fifos)
|
|
epctrl |= S3C_DxEPCTL_TxFNum(index);
|
|
|
|
/* for non control endpoints, set PID to D0 */
|
|
if (index)
|
|
epctrl |= S3C_DxEPCTL_SetD0PID;
|
|
|
|
dev_dbg(hsotg->dev, "%s: write DxEPCTL=0x%08x\n",
|
|
__func__, epctrl);
|
|
|
|
writel(epctrl, hsotg->regs + epctrl_reg);
|
|
dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x\n",
|
|
__func__, readl(hsotg->regs + epctrl_reg));
|
|
|
|
/* enable the endpoint interrupt */
|
|
s3c_hsotg_ctrl_epint(hsotg, index, dir_in, 1);
|
|
|
|
out:
|
|
spin_unlock_irqrestore(&hs_ep->lock, flags);
|
|
return ret;
|
|
}
|
|
|
|
static int s3c_hsotg_ep_disable(struct usb_ep *ep)
|
|
{
|
|
struct s3c_hsotg_ep *hs_ep = our_ep(ep);
|
|
struct s3c_hsotg *hsotg = hs_ep->parent;
|
|
int dir_in = hs_ep->dir_in;
|
|
int index = hs_ep->index;
|
|
unsigned long flags;
|
|
u32 epctrl_reg;
|
|
u32 ctrl;
|
|
|
|
dev_info(hsotg->dev, "%s(ep %p)\n", __func__, ep);
|
|
|
|
if (ep == &hsotg->eps[0].ep) {
|
|
dev_err(hsotg->dev, "%s: called for ep0\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
epctrl_reg = dir_in ? S3C_DIEPCTL(index) : S3C_DOEPCTL(index);
|
|
|
|
/* terminate all requests with shutdown */
|
|
kill_all_requests(hsotg, hs_ep, -ESHUTDOWN, false);
|
|
|
|
spin_lock_irqsave(&hs_ep->lock, flags);
|
|
|
|
ctrl = readl(hsotg->regs + epctrl_reg);
|
|
ctrl &= ~S3C_DxEPCTL_EPEna;
|
|
ctrl &= ~S3C_DxEPCTL_USBActEp;
|
|
ctrl |= S3C_DxEPCTL_SNAK;
|
|
|
|
dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl);
|
|
writel(ctrl, hsotg->regs + epctrl_reg);
|
|
|
|
/* disable endpoint interrupts */
|
|
s3c_hsotg_ctrl_epint(hsotg, hs_ep->index, hs_ep->dir_in, 0);
|
|
|
|
spin_unlock_irqrestore(&hs_ep->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* on_list - check request is on the given endpoint
|
|
* @ep: The endpoint to check.
|
|
* @test: The request to test if it is on the endpoint.
|
|
*/
|
|
static bool on_list(struct s3c_hsotg_ep *ep, struct s3c_hsotg_req *test)
|
|
{
|
|
struct s3c_hsotg_req *req, *treq;
|
|
|
|
list_for_each_entry_safe(req, treq, &ep->queue, queue) {
|
|
if (req == test)
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static int s3c_hsotg_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
|
|
{
|
|
struct s3c_hsotg_req *hs_req = our_req(req);
|
|
struct s3c_hsotg_ep *hs_ep = our_ep(ep);
|
|
struct s3c_hsotg *hs = hs_ep->parent;
|
|
unsigned long flags;
|
|
|
|
dev_info(hs->dev, "ep_dequeue(%p,%p)\n", ep, req);
|
|
|
|
spin_lock_irqsave(&hs_ep->lock, flags);
|
|
|
|
if (!on_list(hs_ep, hs_req)) {
|
|
spin_unlock_irqrestore(&hs_ep->lock, flags);
|
|
return -EINVAL;
|
|
}
|
|
|
|
s3c_hsotg_complete_request(hs, hs_ep, hs_req, -ECONNRESET);
|
|
spin_unlock_irqrestore(&hs_ep->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value)
|
|
{
|
|
struct s3c_hsotg_ep *hs_ep = our_ep(ep);
|
|
struct s3c_hsotg *hs = hs_ep->parent;
|
|
int index = hs_ep->index;
|
|
unsigned long irqflags;
|
|
u32 epreg;
|
|
u32 epctl;
|
|
u32 xfertype;
|
|
|
|
dev_info(hs->dev, "%s(ep %p %s, %d)\n", __func__, ep, ep->name, value);
|
|
|
|
spin_lock_irqsave(&hs_ep->lock, irqflags);
|
|
|
|
/* write both IN and OUT control registers */
|
|
|
|
epreg = S3C_DIEPCTL(index);
|
|
epctl = readl(hs->regs + epreg);
|
|
|
|
if (value) {
|
|
epctl |= S3C_DxEPCTL_Stall + S3C_DxEPCTL_SNAK;
|
|
if (epctl & S3C_DxEPCTL_EPEna)
|
|
epctl |= S3C_DxEPCTL_EPDis;
|
|
} else {
|
|
epctl &= ~S3C_DxEPCTL_Stall;
|
|
xfertype = epctl & S3C_DxEPCTL_EPType_MASK;
|
|
if (xfertype == S3C_DxEPCTL_EPType_Bulk ||
|
|
xfertype == S3C_DxEPCTL_EPType_Intterupt)
|
|
epctl |= S3C_DxEPCTL_SetD0PID;
|
|
}
|
|
|
|
writel(epctl, hs->regs + epreg);
|
|
|
|
epreg = S3C_DOEPCTL(index);
|
|
epctl = readl(hs->regs + epreg);
|
|
|
|
if (value)
|
|
epctl |= S3C_DxEPCTL_Stall;
|
|
else {
|
|
epctl &= ~S3C_DxEPCTL_Stall;
|
|
xfertype = epctl & S3C_DxEPCTL_EPType_MASK;
|
|
if (xfertype == S3C_DxEPCTL_EPType_Bulk ||
|
|
xfertype == S3C_DxEPCTL_EPType_Intterupt)
|
|
epctl |= S3C_DxEPCTL_SetD0PID;
|
|
}
|
|
|
|
writel(epctl, hs->regs + epreg);
|
|
|
|
spin_unlock_irqrestore(&hs_ep->lock, irqflags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct usb_ep_ops s3c_hsotg_ep_ops = {
|
|
.enable = s3c_hsotg_ep_enable,
|
|
.disable = s3c_hsotg_ep_disable,
|
|
.alloc_request = s3c_hsotg_ep_alloc_request,
|
|
.free_request = s3c_hsotg_ep_free_request,
|
|
.queue = s3c_hsotg_ep_queue,
|
|
.dequeue = s3c_hsotg_ep_dequeue,
|
|
.set_halt = s3c_hsotg_ep_sethalt,
|
|
/* note, don't believe we have any call for the fifo routines */
|
|
};
|
|
|
|
/**
|
|
* s3c_hsotg_corereset - issue softreset to the core
|
|
* @hsotg: The device state
|
|
*
|
|
* Issue a soft reset to the core, and await the core finishing it.
|
|
*/
|
|
static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg)
|
|
{
|
|
int timeout;
|
|
u32 grstctl;
|
|
|
|
dev_dbg(hsotg->dev, "resetting core\n");
|
|
|
|
/* issue soft reset */
|
|
writel(S3C_GRSTCTL_CSftRst, hsotg->regs + S3C_GRSTCTL);
|
|
|
|
timeout = 1000;
|
|
do {
|
|
grstctl = readl(hsotg->regs + S3C_GRSTCTL);
|
|
} while ((grstctl & S3C_GRSTCTL_CSftRst) && timeout-- > 0);
|
|
|
|
if (grstctl & S3C_GRSTCTL_CSftRst) {
|
|
dev_err(hsotg->dev, "Failed to get CSftRst asserted\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
timeout = 1000;
|
|
|
|
while (1) {
|
|
u32 grstctl = readl(hsotg->regs + S3C_GRSTCTL);
|
|
|
|
if (timeout-- < 0) {
|
|
dev_info(hsotg->dev,
|
|
"%s: reset failed, GRSTCTL=%08x\n",
|
|
__func__, grstctl);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
if (!(grstctl & S3C_GRSTCTL_AHBIdle))
|
|
continue;
|
|
|
|
break; /* reset done */
|
|
}
|
|
|
|
dev_dbg(hsotg->dev, "reset successful\n");
|
|
return 0;
|
|
}
|
|
|
|
static int s3c_hsotg_start(struct usb_gadget_driver *driver,
|
|
int (*bind)(struct usb_gadget *))
|
|
{
|
|
struct s3c_hsotg *hsotg = our_hsotg;
|
|
int ret;
|
|
|
|
if (!hsotg) {
|
|
printk(KERN_ERR "%s: called with no device\n", __func__);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (!driver) {
|
|
dev_err(hsotg->dev, "%s: no driver\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (driver->speed < USB_SPEED_FULL)
|
|
dev_err(hsotg->dev, "%s: bad speed\n", __func__);
|
|
|
|
if (!bind || !driver->setup) {
|
|
dev_err(hsotg->dev, "%s: missing entry points\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
WARN_ON(hsotg->driver);
|
|
|
|
driver->driver.bus = NULL;
|
|
hsotg->driver = driver;
|
|
hsotg->gadget.dev.driver = &driver->driver;
|
|
hsotg->gadget.dev.dma_mask = hsotg->dev->dma_mask;
|
|
hsotg->gadget.speed = USB_SPEED_UNKNOWN;
|
|
|
|
ret = device_add(&hsotg->gadget.dev);
|
|
if (ret) {
|
|
dev_err(hsotg->dev, "failed to register gadget device\n");
|
|
goto err;
|
|
}
|
|
|
|
ret = bind(&hsotg->gadget);
|
|
if (ret) {
|
|
dev_err(hsotg->dev, "failed bind %s\n", driver->driver.name);
|
|
|
|
hsotg->gadget.dev.driver = NULL;
|
|
hsotg->driver = NULL;
|
|
goto err;
|
|
}
|
|
|
|
/* we must now enable ep0 ready for host detection and then
|
|
* set configuration. */
|
|
|
|
s3c_hsotg_corereset(hsotg);
|
|
|
|
/* set the PLL on, remove the HNP/SRP and set the PHY */
|
|
writel(S3C_GUSBCFG_PHYIf16 | S3C_GUSBCFG_TOutCal(7) |
|
|
(0x5 << 10), hsotg->regs + S3C_GUSBCFG);
|
|
|
|
/* looks like soft-reset changes state of FIFOs */
|
|
s3c_hsotg_init_fifo(hsotg);
|
|
|
|
__orr32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon);
|
|
|
|
writel(1 << 18 | S3C_DCFG_DevSpd_HS, hsotg->regs + S3C_DCFG);
|
|
|
|
/* Clear any pending OTG interrupts */
|
|
writel(0xffffffff, hsotg->regs + S3C_GOTGINT);
|
|
|
|
/* Clear any pending interrupts */
|
|
writel(0xffffffff, hsotg->regs + S3C_GINTSTS);
|
|
|
|
writel(S3C_GINTSTS_DisconnInt | S3C_GINTSTS_SessReqInt |
|
|
S3C_GINTSTS_ConIDStsChng | S3C_GINTSTS_USBRst |
|
|
S3C_GINTSTS_EnumDone | S3C_GINTSTS_OTGInt |
|
|
S3C_GINTSTS_USBSusp | S3C_GINTSTS_WkUpInt |
|
|
S3C_GINTSTS_GOUTNakEff | S3C_GINTSTS_GINNakEff |
|
|
S3C_GINTSTS_ErlySusp,
|
|
hsotg->regs + S3C_GINTMSK);
|
|
|
|
if (using_dma(hsotg))
|
|
writel(S3C_GAHBCFG_GlblIntrEn | S3C_GAHBCFG_DMAEn |
|
|
S3C_GAHBCFG_HBstLen_Incr4,
|
|
hsotg->regs + S3C_GAHBCFG);
|
|
else
|
|
writel(S3C_GAHBCFG_GlblIntrEn, hsotg->regs + S3C_GAHBCFG);
|
|
|
|
/* Enabling INTknTXFEmpMsk here seems to be a big mistake, we end
|
|
* up being flooded with interrupts if the host is polling the
|
|
* endpoint to try and read data. */
|
|
|
|
writel(S3C_DIEPMSK_TimeOUTMsk | S3C_DIEPMSK_AHBErrMsk |
|
|
S3C_DIEPMSK_INTknEPMisMsk |
|
|
S3C_DIEPMSK_EPDisbldMsk | S3C_DIEPMSK_XferComplMsk |
|
|
((hsotg->dedicated_fifos) ? S3C_DIEPMSK_TxFIFOEmpty : 0),
|
|
hsotg->regs + S3C_DIEPMSK);
|
|
|
|
/* don't need XferCompl, we get that from RXFIFO in slave mode. In
|
|
* DMA mode we may need this. */
|
|
writel(S3C_DOEPMSK_SetupMsk | S3C_DOEPMSK_AHBErrMsk |
|
|
S3C_DOEPMSK_EPDisbldMsk |
|
|
(using_dma(hsotg) ? (S3C_DIEPMSK_XferComplMsk |
|
|
S3C_DIEPMSK_TimeOUTMsk) : 0),
|
|
hsotg->regs + S3C_DOEPMSK);
|
|
|
|
writel(0, hsotg->regs + S3C_DAINTMSK);
|
|
|
|
dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
|
|
readl(hsotg->regs + S3C_DIEPCTL0),
|
|
readl(hsotg->regs + S3C_DOEPCTL0));
|
|
|
|
/* enable in and out endpoint interrupts */
|
|
s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_OEPInt | S3C_GINTSTS_IEPInt);
|
|
|
|
/* Enable the RXFIFO when in slave mode, as this is how we collect
|
|
* the data. In DMA mode, we get events from the FIFO but also
|
|
* things we cannot process, so do not use it. */
|
|
if (!using_dma(hsotg))
|
|
s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_RxFLvl);
|
|
|
|
/* Enable interrupts for EP0 in and out */
|
|
s3c_hsotg_ctrl_epint(hsotg, 0, 0, 1);
|
|
s3c_hsotg_ctrl_epint(hsotg, 0, 1, 1);
|
|
|
|
__orr32(hsotg->regs + S3C_DCTL, S3C_DCTL_PWROnPrgDone);
|
|
udelay(10); /* see openiboot */
|
|
__bic32(hsotg->regs + S3C_DCTL, S3C_DCTL_PWROnPrgDone);
|
|
|
|
dev_dbg(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + S3C_DCTL));
|
|
|
|
/* S3C_DxEPCTL_USBActEp says RO in manual, but seems to be set by
|
|
writing to the EPCTL register.. */
|
|
|
|
/* set to read 1 8byte packet */
|
|
writel(S3C_DxEPTSIZ_MC(1) | S3C_DxEPTSIZ_PktCnt(1) |
|
|
S3C_DxEPTSIZ_XferSize(8), hsotg->regs + DOEPTSIZ0);
|
|
|
|
writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) |
|
|
S3C_DxEPCTL_CNAK | S3C_DxEPCTL_EPEna |
|
|
S3C_DxEPCTL_USBActEp,
|
|
hsotg->regs + S3C_DOEPCTL0);
|
|
|
|
/* enable, but don't activate EP0in */
|
|
writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) |
|
|
S3C_DxEPCTL_USBActEp, hsotg->regs + S3C_DIEPCTL0);
|
|
|
|
s3c_hsotg_enqueue_setup(hsotg);
|
|
|
|
dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
|
|
readl(hsotg->regs + S3C_DIEPCTL0),
|
|
readl(hsotg->regs + S3C_DOEPCTL0));
|
|
|
|
/* clear global NAKs */
|
|
writel(S3C_DCTL_CGOUTNak | S3C_DCTL_CGNPInNAK,
|
|
hsotg->regs + S3C_DCTL);
|
|
|
|
/* must be at-least 3ms to allow bus to see disconnect */
|
|
msleep(3);
|
|
|
|
/* remove the soft-disconnect and let's go */
|
|
__bic32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon);
|
|
|
|
/* report to the user, and return */
|
|
|
|
dev_info(hsotg->dev, "bound driver %s\n", driver->driver.name);
|
|
return 0;
|
|
|
|
err:
|
|
hsotg->driver = NULL;
|
|
hsotg->gadget.dev.driver = NULL;
|
|
return ret;
|
|
}
|
|
|
|
static int s3c_hsotg_stop(struct usb_gadget_driver *driver)
|
|
{
|
|
struct s3c_hsotg *hsotg = our_hsotg;
|
|
int ep;
|
|
|
|
if (!hsotg)
|
|
return -ENODEV;
|
|
|
|
if (!driver || driver != hsotg->driver || !driver->unbind)
|
|
return -EINVAL;
|
|
|
|
/* all endpoints should be shutdown */
|
|
for (ep = 0; ep < S3C_HSOTG_EPS; ep++)
|
|
s3c_hsotg_ep_disable(&hsotg->eps[ep].ep);
|
|
|
|
call_gadget(hsotg, disconnect);
|
|
|
|
driver->unbind(&hsotg->gadget);
|
|
hsotg->driver = NULL;
|
|
hsotg->gadget.speed = USB_SPEED_UNKNOWN;
|
|
|
|
device_del(&hsotg->gadget.dev);
|
|
|
|
dev_info(hsotg->dev, "unregistered gadget driver '%s'\n",
|
|
driver->driver.name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s3c_hsotg_gadget_getframe(struct usb_gadget *gadget)
|
|
{
|
|
return s3c_hsotg_read_frameno(to_hsotg(gadget));
|
|
}
|
|
|
|
static struct usb_gadget_ops s3c_hsotg_gadget_ops = {
|
|
.get_frame = s3c_hsotg_gadget_getframe,
|
|
.start = s3c_hsotg_start,
|
|
.stop = s3c_hsotg_stop,
|
|
};
|
|
|
|
/**
|
|
* s3c_hsotg_initep - initialise a single endpoint
|
|
* @hsotg: The device state.
|
|
* @hs_ep: The endpoint to be initialised.
|
|
* @epnum: The endpoint number
|
|
*
|
|
* Initialise the given endpoint (as part of the probe and device state
|
|
* creation) to give to the gadget driver. Setup the endpoint name, any
|
|
* direction information and other state that may be required.
|
|
*/
|
|
static void __devinit s3c_hsotg_initep(struct s3c_hsotg *hsotg,
|
|
struct s3c_hsotg_ep *hs_ep,
|
|
int epnum)
|
|
{
|
|
u32 ptxfifo;
|
|
char *dir;
|
|
|
|
if (epnum == 0)
|
|
dir = "";
|
|
else if ((epnum % 2) == 0) {
|
|
dir = "out";
|
|
} else {
|
|
dir = "in";
|
|
hs_ep->dir_in = 1;
|
|
}
|
|
|
|
hs_ep->index = epnum;
|
|
|
|
snprintf(hs_ep->name, sizeof(hs_ep->name), "ep%d%s", epnum, dir);
|
|
|
|
INIT_LIST_HEAD(&hs_ep->queue);
|
|
INIT_LIST_HEAD(&hs_ep->ep.ep_list);
|
|
|
|
spin_lock_init(&hs_ep->lock);
|
|
|
|
/* add to the list of endpoints known by the gadget driver */
|
|
if (epnum)
|
|
list_add_tail(&hs_ep->ep.ep_list, &hsotg->gadget.ep_list);
|
|
|
|
hs_ep->parent = hsotg;
|
|
hs_ep->ep.name = hs_ep->name;
|
|
hs_ep->ep.maxpacket = epnum ? 512 : EP0_MPS_LIMIT;
|
|
hs_ep->ep.ops = &s3c_hsotg_ep_ops;
|
|
|
|
/* Read the FIFO size for the Periodic TX FIFO, even if we're
|
|
* an OUT endpoint, we may as well do this if in future the
|
|
* code is changed to make each endpoint's direction changeable.
|
|
*/
|
|
|
|
ptxfifo = readl(hsotg->regs + S3C_DPTXFSIZn(epnum));
|
|
hs_ep->fifo_size = S3C_DPTXFSIZn_DPTxFSize_GET(ptxfifo) * 4;
|
|
|
|
/* if we're using dma, we need to set the next-endpoint pointer
|
|
* to be something valid.
|
|
*/
|
|
|
|
if (using_dma(hsotg)) {
|
|
u32 next = S3C_DxEPCTL_NextEp((epnum + 1) % 15);
|
|
writel(next, hsotg->regs + S3C_DIEPCTL(epnum));
|
|
writel(next, hsotg->regs + S3C_DOEPCTL(epnum));
|
|
}
|
|
}
|
|
|
|
/**
|
|
* s3c_hsotg_otgreset - reset the OtG phy block
|
|
* @hsotg: The host state.
|
|
*
|
|
* Power up the phy, set the basic configuration and start the PHY.
|
|
*/
|
|
static void s3c_hsotg_otgreset(struct s3c_hsotg *hsotg)
|
|
{
|
|
struct clk *xusbxti;
|
|
u32 pwr, osc;
|
|
|
|
pwr = readl(S3C_PHYPWR);
|
|
pwr &= ~0x19;
|
|
writel(pwr, S3C_PHYPWR);
|
|
mdelay(1);
|
|
|
|
osc = hsotg->plat->is_osc ? S3C_PHYCLK_EXT_OSC : 0;
|
|
|
|
xusbxti = clk_get(hsotg->dev, "xusbxti");
|
|
if (xusbxti && !IS_ERR(xusbxti)) {
|
|
switch (clk_get_rate(xusbxti)) {
|
|
case 12*MHZ:
|
|
osc |= S3C_PHYCLK_CLKSEL_12M;
|
|
break;
|
|
case 24*MHZ:
|
|
osc |= S3C_PHYCLK_CLKSEL_24M;
|
|
break;
|
|
default:
|
|
case 48*MHZ:
|
|
/* default reference clock */
|
|
break;
|
|
}
|
|
clk_put(xusbxti);
|
|
}
|
|
|
|
writel(osc | 0x10, S3C_PHYCLK);
|
|
|
|
/* issue a full set of resets to the otg and core */
|
|
|
|
writel(S3C_RSTCON_PHY, S3C_RSTCON);
|
|
udelay(20); /* at-least 10uS */
|
|
writel(0, S3C_RSTCON);
|
|
}
|
|
|
|
|
|
static void s3c_hsotg_init(struct s3c_hsotg *hsotg)
|
|
{
|
|
u32 cfg4;
|
|
|
|
/* unmask subset of endpoint interrupts */
|
|
|
|
writel(S3C_DIEPMSK_TimeOUTMsk | S3C_DIEPMSK_AHBErrMsk |
|
|
S3C_DIEPMSK_EPDisbldMsk | S3C_DIEPMSK_XferComplMsk,
|
|
hsotg->regs + S3C_DIEPMSK);
|
|
|
|
writel(S3C_DOEPMSK_SetupMsk | S3C_DOEPMSK_AHBErrMsk |
|
|
S3C_DOEPMSK_EPDisbldMsk | S3C_DOEPMSK_XferComplMsk,
|
|
hsotg->regs + S3C_DOEPMSK);
|
|
|
|
writel(0, hsotg->regs + S3C_DAINTMSK);
|
|
|
|
/* Be in disconnected state until gadget is registered */
|
|
__orr32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon);
|
|
|
|
if (0) {
|
|
/* post global nak until we're ready */
|
|
writel(S3C_DCTL_SGNPInNAK | S3C_DCTL_SGOUTNak,
|
|
hsotg->regs + S3C_DCTL);
|
|
}
|
|
|
|
/* setup fifos */
|
|
|
|
dev_dbg(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n",
|
|
readl(hsotg->regs + S3C_GRXFSIZ),
|
|
readl(hsotg->regs + S3C_GNPTXFSIZ));
|
|
|
|
s3c_hsotg_init_fifo(hsotg);
|
|
|
|
/* set the PLL on, remove the HNP/SRP and set the PHY */
|
|
writel(S3C_GUSBCFG_PHYIf16 | S3C_GUSBCFG_TOutCal(7) | (0x5 << 10),
|
|
hsotg->regs + S3C_GUSBCFG);
|
|
|
|
writel(using_dma(hsotg) ? S3C_GAHBCFG_DMAEn : 0x0,
|
|
hsotg->regs + S3C_GAHBCFG);
|
|
|
|
/* check hardware configuration */
|
|
|
|
cfg4 = readl(hsotg->regs + 0x50);
|
|
hsotg->dedicated_fifos = (cfg4 >> 25) & 1;
|
|
|
|
dev_info(hsotg->dev, "%s fifos\n",
|
|
hsotg->dedicated_fifos ? "dedicated" : "shared");
|
|
}
|
|
|
|
static void s3c_hsotg_dump(struct s3c_hsotg *hsotg)
|
|
{
|
|
#ifdef DEBUG
|
|
struct device *dev = hsotg->dev;
|
|
void __iomem *regs = hsotg->regs;
|
|
u32 val;
|
|
int idx;
|
|
|
|
dev_info(dev, "DCFG=0x%08x, DCTL=0x%08x, DIEPMSK=%08x\n",
|
|
readl(regs + S3C_DCFG), readl(regs + S3C_DCTL),
|
|
readl(regs + S3C_DIEPMSK));
|
|
|
|
dev_info(dev, "GAHBCFG=0x%08x, 0x44=0x%08x\n",
|
|
readl(regs + S3C_GAHBCFG), readl(regs + 0x44));
|
|
|
|
dev_info(dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n",
|
|
readl(regs + S3C_GRXFSIZ), readl(regs + S3C_GNPTXFSIZ));
|
|
|
|
/* show periodic fifo settings */
|
|
|
|
for (idx = 1; idx <= 15; idx++) {
|
|
val = readl(regs + S3C_DPTXFSIZn(idx));
|
|
dev_info(dev, "DPTx[%d] FSize=%d, StAddr=0x%08x\n", idx,
|
|
val >> S3C_DPTXFSIZn_DPTxFSize_SHIFT,
|
|
val & S3C_DPTXFSIZn_DPTxFStAddr_MASK);
|
|
}
|
|
|
|
for (idx = 0; idx < 15; idx++) {
|
|
dev_info(dev,
|
|
"ep%d-in: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n", idx,
|
|
readl(regs + S3C_DIEPCTL(idx)),
|
|
readl(regs + S3C_DIEPTSIZ(idx)),
|
|
readl(regs + S3C_DIEPDMA(idx)));
|
|
|
|
val = readl(regs + S3C_DOEPCTL(idx));
|
|
dev_info(dev,
|
|
"ep%d-out: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n",
|
|
idx, readl(regs + S3C_DOEPCTL(idx)),
|
|
readl(regs + S3C_DOEPTSIZ(idx)),
|
|
readl(regs + S3C_DOEPDMA(idx)));
|
|
|
|
}
|
|
|
|
dev_info(dev, "DVBUSDIS=0x%08x, DVBUSPULSE=%08x\n",
|
|
readl(regs + S3C_DVBUSDIS), readl(regs + S3C_DVBUSPULSE));
|
|
#endif
|
|
}
|
|
|
|
|
|
/**
|
|
* state_show - debugfs: show overall driver and device state.
|
|
* @seq: The seq file to write to.
|
|
* @v: Unused parameter.
|
|
*
|
|
* This debugfs entry shows the overall state of the hardware and
|
|
* some general information about each of the endpoints available
|
|
* to the system.
|
|
*/
|
|
static int state_show(struct seq_file *seq, void *v)
|
|
{
|
|
struct s3c_hsotg *hsotg = seq->private;
|
|
void __iomem *regs = hsotg->regs;
|
|
int idx;
|
|
|
|
seq_printf(seq, "DCFG=0x%08x, DCTL=0x%08x, DSTS=0x%08x\n",
|
|
readl(regs + S3C_DCFG),
|
|
readl(regs + S3C_DCTL),
|
|
readl(regs + S3C_DSTS));
|
|
|
|
seq_printf(seq, "DIEPMSK=0x%08x, DOEPMASK=0x%08x\n",
|
|
readl(regs + S3C_DIEPMSK), readl(regs + S3C_DOEPMSK));
|
|
|
|
seq_printf(seq, "GINTMSK=0x%08x, GINTSTS=0x%08x\n",
|
|
readl(regs + S3C_GINTMSK),
|
|
readl(regs + S3C_GINTSTS));
|
|
|
|
seq_printf(seq, "DAINTMSK=0x%08x, DAINT=0x%08x\n",
|
|
readl(regs + S3C_DAINTMSK),
|
|
readl(regs + S3C_DAINT));
|
|
|
|
seq_printf(seq, "GNPTXSTS=0x%08x, GRXSTSR=%08x\n",
|
|
readl(regs + S3C_GNPTXSTS),
|
|
readl(regs + S3C_GRXSTSR));
|
|
|
|
seq_printf(seq, "\nEndpoint status:\n");
|
|
|
|
for (idx = 0; idx < 15; idx++) {
|
|
u32 in, out;
|
|
|
|
in = readl(regs + S3C_DIEPCTL(idx));
|
|
out = readl(regs + S3C_DOEPCTL(idx));
|
|
|
|
seq_printf(seq, "ep%d: DIEPCTL=0x%08x, DOEPCTL=0x%08x",
|
|
idx, in, out);
|
|
|
|
in = readl(regs + S3C_DIEPTSIZ(idx));
|
|
out = readl(regs + S3C_DOEPTSIZ(idx));
|
|
|
|
seq_printf(seq, ", DIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x",
|
|
in, out);
|
|
|
|
seq_printf(seq, "\n");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int state_open(struct inode *inode, struct file *file)
|
|
{
|
|
return single_open(file, state_show, inode->i_private);
|
|
}
|
|
|
|
static const struct file_operations state_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = state_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
};
|
|
|
|
/**
|
|
* fifo_show - debugfs: show the fifo information
|
|
* @seq: The seq_file to write data to.
|
|
* @v: Unused parameter.
|
|
*
|
|
* Show the FIFO information for the overall fifo and all the
|
|
* periodic transmission FIFOs.
|
|
*/
|
|
static int fifo_show(struct seq_file *seq, void *v)
|
|
{
|
|
struct s3c_hsotg *hsotg = seq->private;
|
|
void __iomem *regs = hsotg->regs;
|
|
u32 val;
|
|
int idx;
|
|
|
|
seq_printf(seq, "Non-periodic FIFOs:\n");
|
|
seq_printf(seq, "RXFIFO: Size %d\n", readl(regs + S3C_GRXFSIZ));
|
|
|
|
val = readl(regs + S3C_GNPTXFSIZ);
|
|
seq_printf(seq, "NPTXFIFO: Size %d, Start 0x%08x\n",
|
|
val >> S3C_GNPTXFSIZ_NPTxFDep_SHIFT,
|
|
val & S3C_GNPTXFSIZ_NPTxFStAddr_MASK);
|
|
|
|
seq_printf(seq, "\nPeriodic TXFIFOs:\n");
|
|
|
|
for (idx = 1; idx <= 15; idx++) {
|
|
val = readl(regs + S3C_DPTXFSIZn(idx));
|
|
|
|
seq_printf(seq, "\tDPTXFIFO%2d: Size %d, Start 0x%08x\n", idx,
|
|
val >> S3C_DPTXFSIZn_DPTxFSize_SHIFT,
|
|
val & S3C_DPTXFSIZn_DPTxFStAddr_MASK);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fifo_open(struct inode *inode, struct file *file)
|
|
{
|
|
return single_open(file, fifo_show, inode->i_private);
|
|
}
|
|
|
|
static const struct file_operations fifo_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = fifo_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
};
|
|
|
|
|
|
static const char *decode_direction(int is_in)
|
|
{
|
|
return is_in ? "in" : "out";
|
|
}
|
|
|
|
/**
|
|
* ep_show - debugfs: show the state of an endpoint.
|
|
* @seq: The seq_file to write data to.
|
|
* @v: Unused parameter.
|
|
*
|
|
* This debugfs entry shows the state of the given endpoint (one is
|
|
* registered for each available).
|
|
*/
|
|
static int ep_show(struct seq_file *seq, void *v)
|
|
{
|
|
struct s3c_hsotg_ep *ep = seq->private;
|
|
struct s3c_hsotg *hsotg = ep->parent;
|
|
struct s3c_hsotg_req *req;
|
|
void __iomem *regs = hsotg->regs;
|
|
int index = ep->index;
|
|
int show_limit = 15;
|
|
unsigned long flags;
|
|
|
|
seq_printf(seq, "Endpoint index %d, named %s, dir %s:\n",
|
|
ep->index, ep->ep.name, decode_direction(ep->dir_in));
|
|
|
|
/* first show the register state */
|
|
|
|
seq_printf(seq, "\tDIEPCTL=0x%08x, DOEPCTL=0x%08x\n",
|
|
readl(regs + S3C_DIEPCTL(index)),
|
|
readl(regs + S3C_DOEPCTL(index)));
|
|
|
|
seq_printf(seq, "\tDIEPDMA=0x%08x, DOEPDMA=0x%08x\n",
|
|
readl(regs + S3C_DIEPDMA(index)),
|
|
readl(regs + S3C_DOEPDMA(index)));
|
|
|
|
seq_printf(seq, "\tDIEPINT=0x%08x, DOEPINT=0x%08x\n",
|
|
readl(regs + S3C_DIEPINT(index)),
|
|
readl(regs + S3C_DOEPINT(index)));
|
|
|
|
seq_printf(seq, "\tDIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x\n",
|
|
readl(regs + S3C_DIEPTSIZ(index)),
|
|
readl(regs + S3C_DOEPTSIZ(index)));
|
|
|
|
seq_printf(seq, "\n");
|
|
seq_printf(seq, "mps %d\n", ep->ep.maxpacket);
|
|
seq_printf(seq, "total_data=%ld\n", ep->total_data);
|
|
|
|
seq_printf(seq, "request list (%p,%p):\n",
|
|
ep->queue.next, ep->queue.prev);
|
|
|
|
spin_lock_irqsave(&ep->lock, flags);
|
|
|
|
list_for_each_entry(req, &ep->queue, queue) {
|
|
if (--show_limit < 0) {
|
|
seq_printf(seq, "not showing more requests...\n");
|
|
break;
|
|
}
|
|
|
|
seq_printf(seq, "%c req %p: %d bytes @%p, ",
|
|
req == ep->req ? '*' : ' ',
|
|
req, req->req.length, req->req.buf);
|
|
seq_printf(seq, "%d done, res %d\n",
|
|
req->req.actual, req->req.status);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&ep->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ep_open(struct inode *inode, struct file *file)
|
|
{
|
|
return single_open(file, ep_show, inode->i_private);
|
|
}
|
|
|
|
static const struct file_operations ep_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = ep_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
};
|
|
|
|
/**
|
|
* s3c_hsotg_create_debug - create debugfs directory and files
|
|
* @hsotg: The driver state
|
|
*
|
|
* Create the debugfs files to allow the user to get information
|
|
* about the state of the system. The directory name is created
|
|
* with the same name as the device itself, in case we end up
|
|
* with multiple blocks in future systems.
|
|
*/
|
|
static void __devinit s3c_hsotg_create_debug(struct s3c_hsotg *hsotg)
|
|
{
|
|
struct dentry *root;
|
|
unsigned epidx;
|
|
|
|
root = debugfs_create_dir(dev_name(hsotg->dev), NULL);
|
|
hsotg->debug_root = root;
|
|
if (IS_ERR(root)) {
|
|
dev_err(hsotg->dev, "cannot create debug root\n");
|
|
return;
|
|
}
|
|
|
|
/* create general state file */
|
|
|
|
hsotg->debug_file = debugfs_create_file("state", 0444, root,
|
|
hsotg, &state_fops);
|
|
|
|
if (IS_ERR(hsotg->debug_file))
|
|
dev_err(hsotg->dev, "%s: failed to create state\n", __func__);
|
|
|
|
hsotg->debug_fifo = debugfs_create_file("fifo", 0444, root,
|
|
hsotg, &fifo_fops);
|
|
|
|
if (IS_ERR(hsotg->debug_fifo))
|
|
dev_err(hsotg->dev, "%s: failed to create fifo\n", __func__);
|
|
|
|
/* create one file for each endpoint */
|
|
|
|
for (epidx = 0; epidx < S3C_HSOTG_EPS; epidx++) {
|
|
struct s3c_hsotg_ep *ep = &hsotg->eps[epidx];
|
|
|
|
ep->debugfs = debugfs_create_file(ep->name, 0444,
|
|
root, ep, &ep_fops);
|
|
|
|
if (IS_ERR(ep->debugfs))
|
|
dev_err(hsotg->dev, "failed to create %s debug file\n",
|
|
ep->name);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* s3c_hsotg_delete_debug - cleanup debugfs entries
|
|
* @hsotg: The driver state
|
|
*
|
|
* Cleanup (remove) the debugfs files for use on module exit.
|
|
*/
|
|
static void __devexit s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg)
|
|
{
|
|
unsigned epidx;
|
|
|
|
for (epidx = 0; epidx < S3C_HSOTG_EPS; epidx++) {
|
|
struct s3c_hsotg_ep *ep = &hsotg->eps[epidx];
|
|
debugfs_remove(ep->debugfs);
|
|
}
|
|
|
|
debugfs_remove(hsotg->debug_file);
|
|
debugfs_remove(hsotg->debug_fifo);
|
|
debugfs_remove(hsotg->debug_root);
|
|
}
|
|
|
|
/**
|
|
* s3c_hsotg_gate - set the hardware gate for the block
|
|
* @pdev: The device we bound to
|
|
* @on: On or off.
|
|
*
|
|
* Set the hardware gate setting into the block. If we end up on
|
|
* something other than an S3C64XX, then we might need to change this
|
|
* to using a platform data callback, or some other mechanism.
|
|
*/
|
|
static void s3c_hsotg_gate(struct platform_device *pdev, bool on)
|
|
{
|
|
unsigned long flags;
|
|
u32 others;
|
|
|
|
local_irq_save(flags);
|
|
|
|
others = __raw_readl(S3C64XX_OTHERS);
|
|
if (on)
|
|
others |= S3C64XX_OTHERS_USBMASK;
|
|
else
|
|
others &= ~S3C64XX_OTHERS_USBMASK;
|
|
__raw_writel(others, S3C64XX_OTHERS);
|
|
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
static struct s3c_hsotg_plat s3c_hsotg_default_pdata;
|
|
|
|
static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
|
|
{
|
|
struct s3c_hsotg_plat *plat = pdev->dev.platform_data;
|
|
struct device *dev = &pdev->dev;
|
|
struct s3c_hsotg *hsotg;
|
|
struct resource *res;
|
|
int epnum;
|
|
int ret;
|
|
|
|
if (!plat)
|
|
plat = &s3c_hsotg_default_pdata;
|
|
|
|
hsotg = kzalloc(sizeof(struct s3c_hsotg) +
|
|
sizeof(struct s3c_hsotg_ep) * S3C_HSOTG_EPS,
|
|
GFP_KERNEL);
|
|
if (!hsotg) {
|
|
dev_err(dev, "cannot get memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
hsotg->dev = dev;
|
|
hsotg->plat = plat;
|
|
|
|
hsotg->clk = clk_get(&pdev->dev, "otg");
|
|
if (IS_ERR(hsotg->clk)) {
|
|
dev_err(dev, "cannot get otg clock\n");
|
|
ret = PTR_ERR(hsotg->clk);
|
|
goto err_mem;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, hsotg);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res) {
|
|
dev_err(dev, "cannot find register resource 0\n");
|
|
ret = -EINVAL;
|
|
goto err_clk;
|
|
}
|
|
|
|
hsotg->regs_res = request_mem_region(res->start, resource_size(res),
|
|
dev_name(dev));
|
|
if (!hsotg->regs_res) {
|
|
dev_err(dev, "cannot reserve registers\n");
|
|
ret = -ENOENT;
|
|
goto err_clk;
|
|
}
|
|
|
|
hsotg->regs = ioremap(res->start, resource_size(res));
|
|
if (!hsotg->regs) {
|
|
dev_err(dev, "cannot map registers\n");
|
|
ret = -ENXIO;
|
|
goto err_regs_res;
|
|
}
|
|
|
|
ret = platform_get_irq(pdev, 0);
|
|
if (ret < 0) {
|
|
dev_err(dev, "cannot find IRQ\n");
|
|
goto err_regs;
|
|
}
|
|
|
|
hsotg->irq = ret;
|
|
|
|
ret = request_irq(ret, s3c_hsotg_irq, 0, dev_name(dev), hsotg);
|
|
if (ret < 0) {
|
|
dev_err(dev, "cannot claim IRQ\n");
|
|
goto err_regs;
|
|
}
|
|
|
|
dev_info(dev, "regs %p, irq %d\n", hsotg->regs, hsotg->irq);
|
|
|
|
device_initialize(&hsotg->gadget.dev);
|
|
|
|
dev_set_name(&hsotg->gadget.dev, "gadget");
|
|
|
|
hsotg->gadget.is_dualspeed = 1;
|
|
hsotg->gadget.ops = &s3c_hsotg_gadget_ops;
|
|
hsotg->gadget.name = dev_name(dev);
|
|
|
|
hsotg->gadget.dev.parent = dev;
|
|
hsotg->gadget.dev.dma_mask = dev->dma_mask;
|
|
|
|
/* setup endpoint information */
|
|
|
|
INIT_LIST_HEAD(&hsotg->gadget.ep_list);
|
|
hsotg->gadget.ep0 = &hsotg->eps[0].ep;
|
|
|
|
/* allocate EP0 request */
|
|
|
|
hsotg->ctrl_req = s3c_hsotg_ep_alloc_request(&hsotg->eps[0].ep,
|
|
GFP_KERNEL);
|
|
if (!hsotg->ctrl_req) {
|
|
dev_err(dev, "failed to allocate ctrl req\n");
|
|
goto err_regs;
|
|
}
|
|
|
|
/* reset the system */
|
|
|
|
clk_enable(hsotg->clk);
|
|
|
|
s3c_hsotg_gate(pdev, true);
|
|
|
|
s3c_hsotg_otgreset(hsotg);
|
|
s3c_hsotg_corereset(hsotg);
|
|
s3c_hsotg_init(hsotg);
|
|
|
|
/* initialise the endpoints now the core has been initialised */
|
|
for (epnum = 0; epnum < S3C_HSOTG_EPS; epnum++)
|
|
s3c_hsotg_initep(hsotg, &hsotg->eps[epnum], epnum);
|
|
|
|
ret = usb_add_gadget_udc(&pdev->dev, &hsotg->gadget);
|
|
if (ret)
|
|
goto err_add_udc;
|
|
|
|
s3c_hsotg_create_debug(hsotg);
|
|
|
|
s3c_hsotg_dump(hsotg);
|
|
|
|
our_hsotg = hsotg;
|
|
return 0;
|
|
|
|
err_add_udc:
|
|
s3c_hsotg_gate(pdev, false);
|
|
clk_disable(hsotg->clk);
|
|
clk_put(hsotg->clk);
|
|
|
|
err_regs:
|
|
iounmap(hsotg->regs);
|
|
|
|
err_regs_res:
|
|
release_resource(hsotg->regs_res);
|
|
kfree(hsotg->regs_res);
|
|
err_clk:
|
|
clk_put(hsotg->clk);
|
|
err_mem:
|
|
kfree(hsotg);
|
|
return ret;
|
|
}
|
|
|
|
static int __devexit s3c_hsotg_remove(struct platform_device *pdev)
|
|
{
|
|
struct s3c_hsotg *hsotg = platform_get_drvdata(pdev);
|
|
|
|
usb_del_gadget_udc(&hsotg->gadget);
|
|
|
|
s3c_hsotg_delete_debug(hsotg);
|
|
|
|
usb_gadget_unregister_driver(hsotg->driver);
|
|
|
|
free_irq(hsotg->irq, hsotg);
|
|
iounmap(hsotg->regs);
|
|
|
|
release_resource(hsotg->regs_res);
|
|
kfree(hsotg->regs_res);
|
|
|
|
s3c_hsotg_gate(pdev, false);
|
|
|
|
clk_disable(hsotg->clk);
|
|
clk_put(hsotg->clk);
|
|
|
|
kfree(hsotg);
|
|
return 0;
|
|
}
|
|
|
|
#if 1
|
|
#define s3c_hsotg_suspend NULL
|
|
#define s3c_hsotg_resume NULL
|
|
#endif
|
|
|
|
static struct platform_driver s3c_hsotg_driver = {
|
|
.driver = {
|
|
.name = "s3c-hsotg",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = s3c_hsotg_probe,
|
|
.remove = __devexit_p(s3c_hsotg_remove),
|
|
.suspend = s3c_hsotg_suspend,
|
|
.resume = s3c_hsotg_resume,
|
|
};
|
|
|
|
static int __init s3c_hsotg_modinit(void)
|
|
{
|
|
return platform_driver_register(&s3c_hsotg_driver);
|
|
}
|
|
|
|
static void __exit s3c_hsotg_modexit(void)
|
|
{
|
|
platform_driver_unregister(&s3c_hsotg_driver);
|
|
}
|
|
|
|
module_init(s3c_hsotg_modinit);
|
|
module_exit(s3c_hsotg_modexit);
|
|
|
|
MODULE_DESCRIPTION("Samsung S3C USB High-speed/OtG device");
|
|
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:s3c-hsotg");
|