linux/drivers/usb
Alan Stern 16032c4f5b USB: EHCI: fix controller wakeup flag settings during suspend
This patch (as1380) fixes a bug in the wakeup settings for EHCI host
controllers.  When the controller is suspended, if it isn't enabled
for remote wakeup then we have to turn off all the port wakeup flags.
Disabling PCI PME# isn't good enough, because some systems (Intel)
evidently use alternate wakeup signalling paths.

In addition, the patch improves the handling of the Intel Moorestown
hardware by performing various power-up and power-down delays just
once instead of once for each port (i.e., the delays are moved outside
of the port loops).  This requires extra code, but the total delay
time is reduced.

There are also a few additional minor cleanups.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Ondrej Zary <linux@rainbow-software.org>
CC: Alek Du <alek.du@intel.com>
CC: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20 13:21:45 -07:00
..
atm USB: ueagle: fix Coding Styles 2010-05-20 13:21:38 -07:00
c67x00 USB: make hcd.h public (drivers dependency) 2010-05-20 13:21:30 -07:00
class USB: rename usb_buffer_alloc() and usb_buffer_free() users 2010-05-20 13:21:38 -07:00
core USB: remove usb_find_device 2010-05-20 13:21:45 -07:00
early USB: ehci-dbgp: split PID register updates for IN and OUT pipes 2010-03-02 14:54:58 -08:00
gadget USB: fix functionfs for CONFIG_NET disabled 2010-05-20 13:21:45 -07:00
host USB: EHCI: fix controller wakeup flag settings during suspend 2010-05-20 13:21:45 -07:00
image USB: BKL removal: mdc800 2010-03-02 14:54:27 -08:00
misc usb: sisusb_con.c: fix shadows sparse warning 2010-05-20 13:21:41 -07:00
mon USB: Change the scatterlist type in struct urb 2010-05-20 13:21:41 -07:00
musb usb: musb: add ulpi access operations 2010-05-20 13:21:36 -07:00
otg USB: omap: switch to subsys_initcall for isp1301 transceiver 2010-05-20 13:21:38 -07:00
serial USB: ftdi_sio: clean up line-status handling 2010-05-20 13:21:44 -07:00
storage USB: unusual-dev: Add bad sense flag for Appotech ax203 based picture frames 2010-05-20 13:21:41 -07:00
wusbcore USB: remove uses of URB_NO_SETUP_DMA_MAP 2010-05-20 13:21:31 -07:00
Kconfig Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 2010-03-03 08:48:58 -08:00
Makefile USB: MXC: Add i.MX21 specific USB host controller driver. 2010-03-02 14:52:55 -08:00
README
usb-skeleton.c USB: rename usb_buffer_alloc() and usb_buffer_free() users 2010-05-20 13:21:38 -07:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.