q3k/linux
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
linux/arch/arm/mach-ep93xx/edb93xx.c
Hartley Sweeten 1305519281 ARM: 6643/1: ep93xx: add framebuffer support to edb93xx boards 
The ep9307, ep9312, and ep9315 variants of the ep93xx processor include
the raster engine needed for framebuffer support.

This allows the EDB93xx boards with those processors to use the
framebuffer driver.

Tested on an EDB9307A with the following kernel parameters:
	video=640x480-16@60
	video=1024x768-16@60

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-05 09:49:40 +00:00

243 lines
6.9 KiB
C
Raw Blame History

/*
* arch/arm/mach-ep93xx/edb93xx.c
* Cirrus Logic EDB93xx Development Board support.
*
* EDB93XX, EDB9301, EDB9307A
* Copyright (C) 2008-2009 H Hartley Sweeten <hsweeten@visionengravers.com>
*
* EDB9302
* Copyright (C) 2006 George Kashperko <george@chas.com.ua>
*
* EDB9302A, EDB9315, EDB9315A
* Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
*
* EDB9307
* Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
*
* EDB9312
* Copyright (C) 2006 Infosys Technologies Limited
* Toufeeq Hussain <toufeeq_hussain@infosys.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
#include <mach/hardware.h>
#include <mach/fb.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
static void __init edb93xx_register_flash(void)
{
if (machine_is_edb9307() || machine_is_edb9312() ||
machine_is_edb9315()) {
ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
} else {
ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
}
}
static struct ep93xx_eth_data __initdata edb93xx_eth_data = {
.phy_id = 1,
};
/*************************************************************************
* EDB93xx i2c peripheral handling
*************************************************************************/
static struct i2c_gpio_platform_data __initdata edb93xx_i2c_gpio_data = {
.sda_pin = EP93XX_GPIO_LINE_EEDAT,
.sda_is_open_drain = 0,
.scl_pin = EP93XX_GPIO_LINE_EECLK,
.scl_is_open_drain = 0,
.udelay = 0, /* default to 100 kHz */
.timeout = 0, /* default to 100 ms */
};
static struct i2c_board_info __initdata edb93xxa_i2c_board_info[] = {
{
I2C_BOARD_INFO("isl1208", 0x6f),
},
};
static struct i2c_board_info __initdata edb93xx_i2c_board_info[] = {
{
I2C_BOARD_INFO("ds1337", 0x68),
},
};
static void __init edb93xx_register_i2c(void)
{
if (machine_is_edb9302a() || machine_is_edb9307a() ||
machine_is_edb9315a()) {
ep93xx_register_i2c(&edb93xx_i2c_gpio_data,
edb93xxa_i2c_board_info,
ARRAY_SIZE(edb93xxa_i2c_board_info));
} else if (machine_is_edb9307() || machine_is_edb9312() ||
machine_is_edb9315()) {
ep93xx_register_i2c(&edb93xx_i2c_gpio_data,
edb93xx_i2c_board_info,
ARRAY_SIZE(edb93xx_i2c_board_info));
}
}
/*************************************************************************
* EDB93xx pwm
*************************************************************************/
static void __init edb93xx_register_pwm(void)
{
if (machine_is_edb9301() ||
machine_is_edb9302() || machine_is_edb9302a()) {
/* EP9301 and EP9302 only have pwm.1 (EGPIO14) */
ep93xx_register_pwm(0, 1);
} else if (machine_is_edb9307() || machine_is_edb9307a()) {
/* EP9307 only has pwm.0 (PWMOUT) */
ep93xx_register_pwm(1, 0);
} else {
/* EP9312 and EP9315 have both */
ep93xx_register_pwm(1, 1);
}
}
/*************************************************************************
* EDB93xx framebuffer
*************************************************************************/
static struct ep93xxfb_mach_info __initdata edb93xxfb_info = {
.num_modes = EP93XXFB_USE_MODEDB,
.bpp = 16,
.flags = 0,
};
static int __init edb93xx_has_fb(void)
{
/* These platforms have an ep93xx with video capability */
return machine_is_edb9307() || machine_is_edb9307a() ||
machine_is_edb9312() || machine_is_edb9315() ||
machine_is_edb9315a();
}
static void __init edb93xx_register_fb(void)
{
if (!edb93xx_has_fb())
return;
if (machine_is_edb9307a() || machine_is_edb9315a())
edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN0;
else
edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN3;
ep93xx_register_fb(&edb93xxfb_info);
}
static void __init edb93xx_init_machine(void)
{
ep93xx_init_devices();
edb93xx_register_flash();
ep93xx_register_eth(&edb93xx_eth_data, 1);
edb93xx_register_i2c();
edb93xx_register_pwm();
edb93xx_register_fb();
}
#ifdef CONFIG_MACH_EDB9301
MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
.boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
MACHINE_END
#endif
#ifdef CONFIG_MACH_EDB9302
MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
/* Maintainer: George Kashperko <george@chas.com.ua> */
.boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
MACHINE_END
#endif
#ifdef CONFIG_MACH_EDB9302A
MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
.boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
MACHINE_END
#endif
#ifdef CONFIG_MACH_EDB9307
MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
.boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
MACHINE_END
#endif
#ifdef CONFIG_MACH_EDB9307A
MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
.boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
MACHINE_END
#endif
#ifdef CONFIG_MACH_EDB9312
MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
/* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
.boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
MACHINE_END
#endif
#ifdef CONFIG_MACH_EDB9315
MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
.boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
MACHINE_END
#endif
#ifdef CONFIG_MACH_EDB9315A
MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
.boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
MACHINE_END
#endif
Reference in a new issue View git blame Copy permalink