linux/drivers/dma/amba-pl08x.c
Linus Torvalds 57f2685c16 Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma
* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (53 commits)
  ARM: mach-shmobile: specify CHCLR registers on SH7372
  dma: shdma: fix runtime PM: clear channel buffers on reset
  dma/imx-sdma: save irq flags when use spin_lock in sdma_tx_submit
  dmaengine/ste_dma40: clear LNK on channel startup
  dmaengine: intel_mid_dma: remove legacy pm interface
  ASoC: mxs: correct 'direction' of device_prep_dma_cyclic
  dmaengine: intel_mid_dma: error path fix
  dmaengine: intel_mid_dma: locking and freeing fixes
  mtd: gpmi-nand: move to dma_transfer_direction
  mtd: fix compile error for gpmi-nand
  mmc: mxs-mmc: fix the dma_transfer_direction migration
  dmaengine: add DMA_TRANS_NONE to dma_transfer_direction
  dma: mxs-dma: Don't use CLKGATE bits in CTRL0 to disable DMA channels
  dma: mxs-dma: make mxs_dma_prep_slave_sg() multi user safe
  dma: mxs-dma: Always leave mxs_dma_init() with the clock disabled.
  dma: mxs-dma: fix a typo in comment
  DMA: PL330: Remove pm_runtime_xxx calls from pl330 probe/remove
  video i.MX IPU: Fix display connections
  i.MX IPU DMA: Fix wrong burstsize settings
  dmaengine/ste_dma40: allow fixed physical channel
  ...

Fix up conflicts in drivers/dma/{Kconfig,mxs-dma.c,pl330.c}

The conflicts looked pretty trivial, but I'll ask people to verify them.
2012-01-17 18:40:24 -08:00

2078 lines
54 KiB
C

/*
* Copyright (c) 2006 ARM Ltd.
* Copyright (c) 2010 ST-Ericsson SA
*
* Author: Peter Pearse <peter.pearse@arm.com>
* Author: Linus Walleij <linus.walleij@stericsson.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc., 59
* Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* The full GNU General Public License is in this distribution in the file
* called COPYING.
*
* Documentation: ARM DDI 0196G == PL080
* Documentation: ARM DDI 0218E == PL081
*
* PL080 & PL081 both have 16 sets of DMA signals that can be routed to any
* channel.
*
* The PL080 has 8 channels available for simultaneous use, and the PL081
* has only two channels. So on these DMA controllers the number of channels
* and the number of incoming DMA signals are two totally different things.
* It is usually not possible to theoretically handle all physical signals,
* so a multiplexing scheme with possible denial of use is necessary.
*
* The PL080 has a dual bus master, PL081 has a single master.
*
* Memory to peripheral transfer may be visualized as
* Get data from memory to DMAC
* Until no data left
* On burst request from peripheral
* Destination burst from DMAC to peripheral
* Clear burst request
* Raise terminal count interrupt
*
* For peripherals with a FIFO:
* Source burst size == half the depth of the peripheral FIFO
* Destination burst size == the depth of the peripheral FIFO
*
* (Bursts are irrelevant for mem to mem transfers - there are no burst
* signals, the DMA controller will simply facilitate its AHB master.)
*
* ASSUMES default (little) endianness for DMA transfers
*
* The PL08x has two flow control settings:
* - DMAC flow control: the transfer size defines the number of transfers
* which occur for the current LLI entry, and the DMAC raises TC at the
* end of every LLI entry. Observed behaviour shows the DMAC listening
* to both the BREQ and SREQ signals (contrary to documented),
* transferring data if either is active. The LBREQ and LSREQ signals
* are ignored.
*
* - Peripheral flow control: the transfer size is ignored (and should be
* zero). The data is transferred from the current LLI entry, until
* after the final transfer signalled by LBREQ or LSREQ. The DMAC
* will then move to the next LLI entry.
*
* Global TODO:
* - Break out common code from arch/arm/mach-s3c64xx and share
*/
#include <linux/amba/bus.h>
#include <linux/amba/pl08x.h>
#include <linux/debugfs.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/dmaengine.h>
#include <linux/dmapool.h>
#include <linux/dma-mapping.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/pm_runtime.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
#include <asm/hardware/pl080.h>
#define DRIVER_NAME "pl08xdmac"
static struct amba_driver pl08x_amba_driver;
/**
* struct vendor_data - vendor-specific config parameters for PL08x derivatives
* @channels: the number of channels available in this variant
* @dualmaster: whether this version supports dual AHB masters or not.
*/
struct vendor_data {
u8 channels;
bool dualmaster;
};
/*
* PL08X private data structures
* An LLI struct - see PL08x TRM. Note that next uses bit[0] as a bus bit,
* start & end do not - their bus bit info is in cctl. Also note that these
* are fixed 32-bit quantities.
*/
struct pl08x_lli {
u32 src;
u32 dst;
u32 lli;
u32 cctl;
};
/**
* struct pl08x_driver_data - the local state holder for the PL08x
* @slave: slave engine for this instance
* @memcpy: memcpy engine for this instance
* @base: virtual memory base (remapped) for the PL08x
* @adev: the corresponding AMBA (PrimeCell) bus entry
* @vd: vendor data for this PL08x variant
* @pd: platform data passed in from the platform/machine
* @phy_chans: array of data for the physical channels
* @pool: a pool for the LLI descriptors
* @pool_ctr: counter of LLIs in the pool
* @lli_buses: bitmask to or in to LLI pointer selecting AHB port for LLI
* fetches
* @mem_buses: set to indicate memory transfers on AHB2.
* @lock: a spinlock for this struct
*/
struct pl08x_driver_data {
struct dma_device slave;
struct dma_device memcpy;
void __iomem *base;
struct amba_device *adev;
const struct vendor_data *vd;
struct pl08x_platform_data *pd;
struct pl08x_phy_chan *phy_chans;
struct dma_pool *pool;
int pool_ctr;
u8 lli_buses;
u8 mem_buses;
spinlock_t lock;
};
/*
* PL08X specific defines
*/
/* Size (bytes) of each LLI buffer allocated for one transfer */
# define PL08X_LLI_TSFR_SIZE 0x2000
/* Maximum times we call dma_pool_alloc on this pool without freeing */
#define MAX_NUM_TSFR_LLIS (PL08X_LLI_TSFR_SIZE/sizeof(struct pl08x_lli))
#define PL08X_ALIGN 8
static inline struct pl08x_dma_chan *to_pl08x_chan(struct dma_chan *chan)
{
return container_of(chan, struct pl08x_dma_chan, chan);
}
static inline struct pl08x_txd *to_pl08x_txd(struct dma_async_tx_descriptor *tx)
{
return container_of(tx, struct pl08x_txd, tx);
}
/*
* Physical channel handling
*/
/* Whether a certain channel is busy or not */
static int pl08x_phy_channel_busy(struct pl08x_phy_chan *ch)
{
unsigned int val;
val = readl(ch->base + PL080_CH_CONFIG);
return val & PL080_CONFIG_ACTIVE;
}
/*
* Set the initial DMA register values i.e. those for the first LLI
* The next LLI pointer and the configuration interrupt bit have
* been set when the LLIs were constructed. Poke them into the hardware
* and start the transfer.
*/
static void pl08x_start_txd(struct pl08x_dma_chan *plchan,
struct pl08x_txd *txd)
{
struct pl08x_driver_data *pl08x = plchan->host;
struct pl08x_phy_chan *phychan = plchan->phychan;
struct pl08x_lli *lli = &txd->llis_va[0];
u32 val;
plchan->at = txd;
/* Wait for channel inactive */
while (pl08x_phy_channel_busy(phychan))
cpu_relax();
dev_vdbg(&pl08x->adev->dev,
"WRITE channel %d: csrc=0x%08x, cdst=0x%08x, "
"clli=0x%08x, cctl=0x%08x, ccfg=0x%08x\n",
phychan->id, lli->src, lli->dst, lli->lli, lli->cctl,
txd->ccfg);
writel(lli->src, phychan->base + PL080_CH_SRC_ADDR);
writel(lli->dst, phychan->base + PL080_CH_DST_ADDR);
writel(lli->lli, phychan->base + PL080_CH_LLI);
writel(lli->cctl, phychan->base + PL080_CH_CONTROL);
writel(txd->ccfg, phychan->base + PL080_CH_CONFIG);
/* Enable the DMA channel */
/* Do not access config register until channel shows as disabled */
while (readl(pl08x->base + PL080_EN_CHAN) & (1 << phychan->id))
cpu_relax();
/* Do not access config register until channel shows as inactive */
val = readl(phychan->base + PL080_CH_CONFIG);
while ((val & PL080_CONFIG_ACTIVE) || (val & PL080_CONFIG_ENABLE))
val = readl(phychan->base + PL080_CH_CONFIG);
writel(val | PL080_CONFIG_ENABLE, phychan->base + PL080_CH_CONFIG);
}
/*
* Pause the channel by setting the HALT bit.
*
* For M->P transfers, pause the DMAC first and then stop the peripheral -
* the FIFO can only drain if the peripheral is still requesting data.
* (note: this can still timeout if the DMAC FIFO never drains of data.)
*
* For P->M transfers, disable the peripheral first to stop it filling
* the DMAC FIFO, and then pause the DMAC.
*/
static void pl08x_pause_phy_chan(struct pl08x_phy_chan *ch)
{
u32 val;
int timeout;
/* Set the HALT bit and wait for the FIFO to drain */
val = readl(ch->base + PL080_CH_CONFIG);
val |= PL080_CONFIG_HALT;
writel(val, ch->base + PL080_CH_CONFIG);
/* Wait for channel inactive */
for (timeout = 1000; timeout; timeout--) {
if (!pl08x_phy_channel_busy(ch))
break;
udelay(1);
}
if (pl08x_phy_channel_busy(ch))
pr_err("pl08x: channel%u timeout waiting for pause\n", ch->id);
}
static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch)
{
u32 val;
/* Clear the HALT bit */
val = readl(ch->base + PL080_CH_CONFIG);
val &= ~PL080_CONFIG_HALT;
writel(val, ch->base + PL080_CH_CONFIG);
}
/*
* pl08x_terminate_phy_chan() stops the channel, clears the FIFO and
* clears any pending interrupt status. This should not be used for
* an on-going transfer, but as a method of shutting down a channel
* (eg, when it's no longer used) or terminating a transfer.
*/
static void pl08x_terminate_phy_chan(struct pl08x_driver_data *pl08x,
struct pl08x_phy_chan *ch)
{
u32 val = readl(ch->base + PL080_CH_CONFIG);
val &= ~(PL080_CONFIG_ENABLE | PL080_CONFIG_ERR_IRQ_MASK |
PL080_CONFIG_TC_IRQ_MASK);
writel(val, ch->base + PL080_CH_CONFIG);
writel(1 << ch->id, pl08x->base + PL080_ERR_CLEAR);
writel(1 << ch->id, pl08x->base + PL080_TC_CLEAR);
}
static inline u32 get_bytes_in_cctl(u32 cctl)
{
/* The source width defines the number of bytes */
u32 bytes = cctl & PL080_CONTROL_TRANSFER_SIZE_MASK;
switch (cctl >> PL080_CONTROL_SWIDTH_SHIFT) {
case PL080_WIDTH_8BIT:
break;
case PL080_WIDTH_16BIT:
bytes *= 2;
break;
case PL080_WIDTH_32BIT:
bytes *= 4;
break;
}
return bytes;
}
/* The channel should be paused when calling this */
static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan)
{
struct pl08x_phy_chan *ch;
struct pl08x_txd *txd;
unsigned long flags;
size_t bytes = 0;
spin_lock_irqsave(&plchan->lock, flags);
ch = plchan->phychan;
txd = plchan->at;
/*
* Follow the LLIs to get the number of remaining
* bytes in the currently active transaction.
*/
if (ch && txd) {
u32 clli = readl(ch->base + PL080_CH_LLI) & ~PL080_LLI_LM_AHB2;
/* First get the remaining bytes in the active transfer */
bytes = get_bytes_in_cctl(readl(ch->base + PL080_CH_CONTROL));
if (clli) {
struct pl08x_lli *llis_va = txd->llis_va;
dma_addr_t llis_bus = txd->llis_bus;
int index;
BUG_ON(clli < llis_bus || clli >= llis_bus +
sizeof(struct pl08x_lli) * MAX_NUM_TSFR_LLIS);
/*
* Locate the next LLI - as this is an array,
* it's simple maths to find.
*/
index = (clli - llis_bus) / sizeof(struct pl08x_lli);
for (; index < MAX_NUM_TSFR_LLIS; index++) {
bytes += get_bytes_in_cctl(llis_va[index].cctl);
/*
* A LLI pointer of 0 terminates the LLI list
*/
if (!llis_va[index].lli)
break;
}
}
}
/* Sum up all queued transactions */
if (!list_empty(&plchan->pend_list)) {
struct pl08x_txd *txdi;
list_for_each_entry(txdi, &plchan->pend_list, node) {
struct pl08x_sg *dsg;
list_for_each_entry(dsg, &txd->dsg_list, node)
bytes += dsg->len;
}
}
spin_unlock_irqrestore(&plchan->lock, flags);
return bytes;
}
/*
* Allocate a physical channel for a virtual channel
*
* Try to locate a physical channel to be used for this transfer. If all
* are taken return NULL and the requester will have to cope by using
* some fallback PIO mode or retrying later.
*/
static struct pl08x_phy_chan *
pl08x_get_phy_channel(struct pl08x_driver_data *pl08x,
struct pl08x_dma_chan *virt_chan)
{
struct pl08x_phy_chan *ch = NULL;
unsigned long flags;
int i;
for (i = 0; i < pl08x->vd->channels; i++) {
ch = &pl08x->phy_chans[i];
spin_lock_irqsave(&ch->lock, flags);
if (!ch->serving) {
ch->serving = virt_chan;
ch->signal = -1;
spin_unlock_irqrestore(&ch->lock, flags);
break;
}
spin_unlock_irqrestore(&ch->lock, flags);
}
if (i == pl08x->vd->channels) {
/* No physical channel available, cope with it */
return NULL;
}
pm_runtime_get_sync(&pl08x->adev->dev);
return ch;
}
static inline void pl08x_put_phy_channel(struct pl08x_driver_data *pl08x,
struct pl08x_phy_chan *ch)
{
unsigned long flags;
spin_lock_irqsave(&ch->lock, flags);
/* Stop the channel and clear its interrupts */
pl08x_terminate_phy_chan(pl08x, ch);
pm_runtime_put(&pl08x->adev->dev);
/* Mark it as free */
ch->serving = NULL;
spin_unlock_irqrestore(&ch->lock, flags);
}
/*
* LLI handling
*/
static inline unsigned int pl08x_get_bytes_for_cctl(unsigned int coded)
{
switch (coded) {
case PL080_WIDTH_8BIT:
return 1;
case PL080_WIDTH_16BIT:
return 2;
case PL080_WIDTH_32BIT:
return 4;
default:
break;
}
BUG();
return 0;
}
static inline u32 pl08x_cctl_bits(u32 cctl, u8 srcwidth, u8 dstwidth,
size_t tsize)
{
u32 retbits = cctl;
/* Remove all src, dst and transfer size bits */
retbits &= ~PL080_CONTROL_DWIDTH_MASK;
retbits &= ~PL080_CONTROL_SWIDTH_MASK;
retbits &= ~PL080_CONTROL_TRANSFER_SIZE_MASK;
/* Then set the bits according to the parameters */
switch (srcwidth) {
case 1:
retbits |= PL080_WIDTH_8BIT << PL080_CONTROL_SWIDTH_SHIFT;
break;
case 2:
retbits |= PL080_WIDTH_16BIT << PL080_CONTROL_SWIDTH_SHIFT;
break;
case 4:
retbits |= PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT;
break;
default:
BUG();
break;
}
switch (dstwidth) {
case 1:
retbits |= PL080_WIDTH_8BIT << PL080_CONTROL_DWIDTH_SHIFT;
break;
case 2:
retbits |= PL080_WIDTH_16BIT << PL080_CONTROL_DWIDTH_SHIFT;
break;
case 4:
retbits |= PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT;
break;
default:
BUG();
break;
}
retbits |= tsize << PL080_CONTROL_TRANSFER_SIZE_SHIFT;
return retbits;
}
struct pl08x_lli_build_data {
struct pl08x_txd *txd;
struct pl08x_bus_data srcbus;
struct pl08x_bus_data dstbus;
size_t remainder;
u32 lli_bus;
};
/*
* Autoselect a master bus to use for the transfer. Slave will be the chosen as
* victim in case src & dest are not similarly aligned. i.e. If after aligning
* masters address with width requirements of transfer (by sending few byte by
* byte data), slave is still not aligned, then its width will be reduced to
* BYTE.
* - prefers the destination bus if both available
* - prefers bus with fixed address (i.e. peripheral)
*/
static void pl08x_choose_master_bus(struct pl08x_lli_build_data *bd,
struct pl08x_bus_data **mbus, struct pl08x_bus_data **sbus, u32 cctl)
{
if (!(cctl & PL080_CONTROL_DST_INCR)) {
*mbus = &bd->dstbus;
*sbus = &bd->srcbus;
} else if (!(cctl & PL080_CONTROL_SRC_INCR)) {
*mbus = &bd->srcbus;
*sbus = &bd->dstbus;
} else {
if (bd->dstbus.buswidth >= bd->srcbus.buswidth) {
*mbus = &bd->dstbus;
*sbus = &bd->srcbus;
} else {
*mbus = &bd->srcbus;
*sbus = &bd->dstbus;
}
}
}
/*
* Fills in one LLI for a certain transfer descriptor and advance the counter
*/
static void pl08x_fill_lli_for_desc(struct pl08x_lli_build_data *bd,
int num_llis, int len, u32 cctl)
{
struct pl08x_lli *llis_va = bd->txd->llis_va;
dma_addr_t llis_bus = bd->txd->llis_bus;
BUG_ON(num_llis >= MAX_NUM_TSFR_LLIS);
llis_va[num_llis].cctl = cctl;
llis_va[num_llis].src = bd->srcbus.addr;
llis_va[num_llis].dst = bd->dstbus.addr;
llis_va[num_llis].lli = llis_bus + (num_llis + 1) *
sizeof(struct pl08x_lli);
llis_va[num_llis].lli |= bd->lli_bus;
if (cctl & PL080_CONTROL_SRC_INCR)
bd->srcbus.addr += len;
if (cctl & PL080_CONTROL_DST_INCR)
bd->dstbus.addr += len;
BUG_ON(bd->remainder < len);
bd->remainder -= len;
}
static inline void prep_byte_width_lli(struct pl08x_lli_build_data *bd,
u32 *cctl, u32 len, int num_llis, size_t *total_bytes)
{
*cctl = pl08x_cctl_bits(*cctl, 1, 1, len);
pl08x_fill_lli_for_desc(bd, num_llis, len, *cctl);
(*total_bytes) += len;
}
/*
* This fills in the table of LLIs for the transfer descriptor
* Note that we assume we never have to change the burst sizes
* Return 0 for error
*/
static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
struct pl08x_txd *txd)
{
struct pl08x_bus_data *mbus, *sbus;
struct pl08x_lli_build_data bd;
int num_llis = 0;
u32 cctl, early_bytes = 0;
size_t max_bytes_per_lli, total_bytes;
struct pl08x_lli *llis_va;
struct pl08x_sg *dsg;
txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT, &txd->llis_bus);
if (!txd->llis_va) {
dev_err(&pl08x->adev->dev, "%s no memory for llis\n", __func__);
return 0;
}
pl08x->pool_ctr++;
bd.txd = txd;
bd.lli_bus = (pl08x->lli_buses & PL08X_AHB2) ? PL080_LLI_LM_AHB2 : 0;
cctl = txd->cctl;
/* Find maximum width of the source bus */
bd.srcbus.maxwidth =
pl08x_get_bytes_for_cctl((cctl & PL080_CONTROL_SWIDTH_MASK) >>
PL080_CONTROL_SWIDTH_SHIFT);
/* Find maximum width of the destination bus */
bd.dstbus.maxwidth =
pl08x_get_bytes_for_cctl((cctl & PL080_CONTROL_DWIDTH_MASK) >>
PL080_CONTROL_DWIDTH_SHIFT);
list_for_each_entry(dsg, &txd->dsg_list, node) {
total_bytes = 0;
cctl = txd->cctl;
bd.srcbus.addr = dsg->src_addr;
bd.dstbus.addr = dsg->dst_addr;
bd.remainder = dsg->len;
bd.srcbus.buswidth = bd.srcbus.maxwidth;
bd.dstbus.buswidth = bd.dstbus.maxwidth;
pl08x_choose_master_bus(&bd, &mbus, &sbus, cctl);
dev_vdbg(&pl08x->adev->dev, "src=0x%08x%s/%u dst=0x%08x%s/%u len=%zu\n",
bd.srcbus.addr, cctl & PL080_CONTROL_SRC_INCR ? "+" : "",
bd.srcbus.buswidth,
bd.dstbus.addr, cctl & PL080_CONTROL_DST_INCR ? "+" : "",
bd.dstbus.buswidth,
bd.remainder);
dev_vdbg(&pl08x->adev->dev, "mbus=%s sbus=%s\n",
mbus == &bd.srcbus ? "src" : "dst",
sbus == &bd.srcbus ? "src" : "dst");
/*
* Zero length is only allowed if all these requirements are
* met:
* - flow controller is peripheral.
* - src.addr is aligned to src.width
* - dst.addr is aligned to dst.width
*
* sg_len == 1 should be true, as there can be two cases here:
*
* - Memory addresses are contiguous and are not scattered.
* Here, Only one sg will be passed by user driver, with
* memory address and zero length. We pass this to controller
* and after the transfer it will receive the last burst
* request from peripheral and so transfer finishes.
*
* - Memory addresses are scattered and are not contiguous.
* Here, Obviously as DMA controller doesn't know when a lli's
* transfer gets over, it can't load next lli. So in this
* case, there has to be an assumption that only one lli is
* supported. Thus, we can't have scattered addresses.
*/
if (!bd.remainder) {
u32 fc = (txd->ccfg & PL080_CONFIG_FLOW_CONTROL_MASK) >>
PL080_CONFIG_FLOW_CONTROL_SHIFT;
if (!((fc >= PL080_FLOW_SRC2DST_DST) &&
(fc <= PL080_FLOW_SRC2DST_SRC))) {
dev_err(&pl08x->adev->dev, "%s sg len can't be zero",
__func__);
return 0;
}
if ((bd.srcbus.addr % bd.srcbus.buswidth) ||
(bd.srcbus.addr % bd.srcbus.buswidth)) {
dev_err(&pl08x->adev->dev,
"%s src & dst address must be aligned to src"
" & dst width if peripheral is flow controller",
__func__);
return 0;
}
cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth,
bd.dstbus.buswidth, 0);
pl08x_fill_lli_for_desc(&bd, num_llis++, 0, cctl);
break;
}
/*
* Send byte by byte for following cases
* - Less than a bus width available
* - until master bus is aligned
*/
if (bd.remainder < mbus->buswidth)
early_bytes = bd.remainder;
else if ((mbus->addr) % (mbus->buswidth)) {
early_bytes = mbus->buswidth - (mbus->addr) %
(mbus->buswidth);
if ((bd.remainder - early_bytes) < mbus->buswidth)
early_bytes = bd.remainder;
}
if (early_bytes) {
dev_vdbg(&pl08x->adev->dev,
"%s byte width LLIs (remain 0x%08x)\n",
__func__, bd.remainder);
prep_byte_width_lli(&bd, &cctl, early_bytes, num_llis++,
&total_bytes);
}
if (bd.remainder) {
/*
* Master now aligned
* - if slave is not then we must set its width down
*/
if (sbus->addr % sbus->buswidth) {
dev_dbg(&pl08x->adev->dev,
"%s set down bus width to one byte\n",
__func__);
sbus->buswidth = 1;
}
/*
* Bytes transferred = tsize * src width, not
* MIN(buswidths)
*/
max_bytes_per_lli = bd.srcbus.buswidth *
PL080_CONTROL_TRANSFER_SIZE_MASK;
dev_vdbg(&pl08x->adev->dev,
"%s max bytes per lli = %zu\n",
__func__, max_bytes_per_lli);
/*
* Make largest possible LLIs until less than one bus
* width left
*/
while (bd.remainder > (mbus->buswidth - 1)) {
size_t lli_len, tsize, width;
/*
* If enough left try to send max possible,
* otherwise try to send the remainder
*/
lli_len = min(bd.remainder, max_bytes_per_lli);
/*
* Check against maximum bus alignment:
* Calculate actual transfer size in relation to
* bus width an get a maximum remainder of the
* highest bus width - 1
*/
width = max(mbus->buswidth, sbus->buswidth);
lli_len = (lli_len / width) * width;
tsize = lli_len / bd.srcbus.buswidth;
dev_vdbg(&pl08x->adev->dev,
"%s fill lli with single lli chunk of "
"size 0x%08zx (remainder 0x%08zx)\n",
__func__, lli_len, bd.remainder);
cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth,
bd.dstbus.buswidth, tsize);
pl08x_fill_lli_for_desc(&bd, num_llis++,
lli_len, cctl);
total_bytes += lli_len;
}
/*
* Send any odd bytes
*/
if (bd.remainder) {
dev_vdbg(&pl08x->adev->dev,
"%s align with boundary, send odd bytes (remain %zu)\n",
__func__, bd.remainder);
prep_byte_width_lli(&bd, &cctl, bd.remainder,
num_llis++, &total_bytes);
}
}
if (total_bytes != dsg->len) {
dev_err(&pl08x->adev->dev,
"%s size of encoded lli:s don't match total txd, transferred 0x%08zx from size 0x%08zx\n",
__func__, total_bytes, dsg->len);
return 0;
}
if (num_llis >= MAX_NUM_TSFR_LLIS) {
dev_err(&pl08x->adev->dev,
"%s need to increase MAX_NUM_TSFR_LLIS from 0x%08x\n",
__func__, (u32) MAX_NUM_TSFR_LLIS);
return 0;
}
}
llis_va = txd->llis_va;
/* The final LLI terminates the LLI. */
llis_va[num_llis - 1].lli = 0;
/* The final LLI element shall also fire an interrupt. */
llis_va[num_llis - 1].cctl |= PL080_CONTROL_TC_IRQ_EN;
#ifdef VERBOSE_DEBUG
{
int i;
dev_vdbg(&pl08x->adev->dev,
"%-3s %-9s %-10s %-10s %-10s %s\n",
"lli", "", "csrc", "cdst", "clli", "cctl");
for (i = 0; i < num_llis; i++) {
dev_vdbg(&pl08x->adev->dev,
"%3d @%p: 0x%08x 0x%08x 0x%08x 0x%08x\n",
i, &llis_va[i], llis_va[i].src,
llis_va[i].dst, llis_va[i].lli, llis_va[i].cctl
);
}
}
#endif
return num_llis;
}
/* You should call this with the struct pl08x lock held */
static void pl08x_free_txd(struct pl08x_driver_data *pl08x,
struct pl08x_txd *txd)
{
struct pl08x_sg *dsg, *_dsg;
/* Free the LLI */
if (txd->llis_va)
dma_pool_free(pl08x->pool, txd->llis_va, txd->llis_bus);
pl08x->pool_ctr--;
list_for_each_entry_safe(dsg, _dsg, &txd->dsg_list, node) {
list_del(&dsg->node);
kfree(dsg);
}
kfree(txd);
}
static void pl08x_free_txd_list(struct pl08x_driver_data *pl08x,
struct pl08x_dma_chan *plchan)
{
struct pl08x_txd *txdi = NULL;
struct pl08x_txd *next;
if (!list_empty(&plchan->pend_list)) {
list_for_each_entry_safe(txdi,
next, &plchan->pend_list, node) {
list_del(&txdi->node);
pl08x_free_txd(pl08x, txdi);
}
}
}
/*
* The DMA ENGINE API
*/
static int pl08x_alloc_chan_resources(struct dma_chan *chan)
{
return 0;
}
static void pl08x_free_chan_resources(struct dma_chan *chan)
{
}
/*
* This should be called with the channel plchan->lock held
*/
static int prep_phy_channel(struct pl08x_dma_chan *plchan,
struct pl08x_txd *txd)
{
struct pl08x_driver_data *pl08x = plchan->host;
struct pl08x_phy_chan *ch;
int ret;
/* Check if we already have a channel */
if (plchan->phychan) {
ch = plchan->phychan;
goto got_channel;
}
ch = pl08x_get_phy_channel(pl08x, plchan);
if (!ch) {
/* No physical channel available, cope with it */
dev_dbg(&pl08x->adev->dev, "no physical channel available for xfer on %s\n", plchan->name);
return -EBUSY;
}
/*
* OK we have a physical channel: for memcpy() this is all we
* need, but for slaves the physical signals may be muxed!
* Can the platform allow us to use this channel?
*/
if (plchan->slave && pl08x->pd->get_signal) {
ret = pl08x->pd->get_signal(plchan);
if (ret < 0) {
dev_dbg(&pl08x->adev->dev,
"unable to use physical channel %d for transfer on %s due to platform restrictions\n",
ch->id, plchan->name);
/* Release physical channel & return */
pl08x_put_phy_channel(pl08x, ch);
return -EBUSY;
}
ch->signal = ret;
}
plchan->phychan = ch;
dev_dbg(&pl08x->adev->dev, "allocated physical channel %d and signal %d for xfer on %s\n",
ch->id,
ch->signal,
plchan->name);
got_channel:
/* Assign the flow control signal to this channel */
if (txd->direction == DMA_MEM_TO_DEV)
txd->ccfg |= ch->signal << PL080_CONFIG_DST_SEL_SHIFT;
else if (txd->direction == DMA_DEV_TO_MEM)
txd->ccfg |= ch->signal << PL080_CONFIG_SRC_SEL_SHIFT;
plchan->phychan_hold++;
return 0;
}
static void release_phy_channel(struct pl08x_dma_chan *plchan)
{
struct pl08x_driver_data *pl08x = plchan->host;
if ((plchan->phychan->signal >= 0) && pl08x->pd->put_signal) {
pl08x->pd->put_signal(plchan);
plchan->phychan->signal = -1;
}
pl08x_put_phy_channel(pl08x, plchan->phychan);
plchan->phychan = NULL;
}
static dma_cookie_t pl08x_tx_submit(struct dma_async_tx_descriptor *tx)
{
struct pl08x_dma_chan *plchan = to_pl08x_chan(tx->chan);
struct pl08x_txd *txd = to_pl08x_txd(tx);
unsigned long flags;
spin_lock_irqsave(&plchan->lock, flags);
plchan->chan.cookie += 1;
if (plchan->chan.cookie < 0)
plchan->chan.cookie = 1;
tx->cookie = plchan->chan.cookie;
/* Put this onto the pending list */
list_add_tail(&txd->node, &plchan->pend_list);
/*
* If there was no physical channel available for this memcpy,
* stack the request up and indicate that the channel is waiting
* for a free physical channel.
*/
if (!plchan->slave && !plchan->phychan) {
/* Do this memcpy whenever there is a channel ready */
plchan->state = PL08X_CHAN_WAITING;
plchan->waiting = txd;
} else {
plchan->phychan_hold--;
}
spin_unlock_irqrestore(&plchan->lock, flags);
return tx->cookie;
}
static struct dma_async_tx_descriptor *pl08x_prep_dma_interrupt(
struct dma_chan *chan, unsigned long flags)
{
struct dma_async_tx_descriptor *retval = NULL;
return retval;
}
/*
* Code accessing dma_async_is_complete() in a tight loop may give problems.
* If slaves are relying on interrupts to signal completion this function
* must not be called with interrupts disabled.
*/
static enum dma_status pl08x_dma_tx_status(struct dma_chan *chan,
dma_cookie_t cookie, struct dma_tx_state *txstate)
{
struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
dma_cookie_t last_used;
dma_cookie_t last_complete;
enum dma_status ret;
u32 bytesleft = 0;
last_used = plchan->chan.cookie;
last_complete = plchan->lc;
ret = dma_async_is_complete(cookie, last_complete, last_used);
if (ret == DMA_SUCCESS) {
dma_set_tx_state(txstate, last_complete, last_used, 0);
return ret;
}
/*
* This cookie not complete yet
*/
last_used = plchan->chan.cookie;
last_complete = plchan->lc;
/* Get number of bytes left in the active transactions and queue */
bytesleft = pl08x_getbytes_chan(plchan);
dma_set_tx_state(txstate, last_complete, last_used,
bytesleft);
if (plchan->state == PL08X_CHAN_PAUSED)
return DMA_PAUSED;
/* Whether waiting or running, we're in progress */
return DMA_IN_PROGRESS;
}
/* PrimeCell DMA extension */
struct burst_table {
u32 burstwords;
u32 reg;
};
static const struct burst_table burst_sizes[] = {
{
.burstwords = 256,
.reg = PL080_BSIZE_256,
},
{
.burstwords = 128,
.reg = PL080_BSIZE_128,
},
{
.burstwords = 64,
.reg = PL080_BSIZE_64,
},
{
.burstwords = 32,
.reg = PL080_BSIZE_32,
},
{
.burstwords = 16,
.reg = PL080_BSIZE_16,
},
{
.burstwords = 8,
.reg = PL080_BSIZE_8,
},
{
.burstwords = 4,
.reg = PL080_BSIZE_4,
},
{
.burstwords = 0,
.reg = PL080_BSIZE_1,
},
};
/*
* Given the source and destination available bus masks, select which
* will be routed to each port. We try to have source and destination
* on separate ports, but always respect the allowable settings.
*/
static u32 pl08x_select_bus(u8 src, u8 dst)
{
u32 cctl = 0;
if (!(dst & PL08X_AHB1) || ((dst & PL08X_AHB2) && (src & PL08X_AHB1)))
cctl |= PL080_CONTROL_DST_AHB2;
if (!(src & PL08X_AHB1) || ((src & PL08X_AHB2) && !(dst & PL08X_AHB2)))
cctl |= PL080_CONTROL_SRC_AHB2;
return cctl;
}
static u32 pl08x_cctl(u32 cctl)
{
cctl &= ~(PL080_CONTROL_SRC_AHB2 | PL080_CONTROL_DST_AHB2 |
PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR |
PL080_CONTROL_PROT_MASK);
/* Access the cell in privileged mode, non-bufferable, non-cacheable */
return cctl | PL080_CONTROL_PROT_SYS;
}
static u32 pl08x_width(enum dma_slave_buswidth width)
{
switch (width) {
case DMA_SLAVE_BUSWIDTH_1_BYTE:
return PL080_WIDTH_8BIT;
case DMA_SLAVE_BUSWIDTH_2_BYTES:
return PL080_WIDTH_16BIT;
case DMA_SLAVE_BUSWIDTH_4_BYTES:
return PL080_WIDTH_32BIT;
default:
return ~0;
}
}
static u32 pl08x_burst(u32 maxburst)
{
int i;
for (i = 0; i < ARRAY_SIZE(burst_sizes); i++)
if (burst_sizes[i].burstwords <= maxburst)
break;
return burst_sizes[i].reg;
}
static int dma_set_runtime_config(struct dma_chan *chan,
struct dma_slave_config *config)
{
struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
struct pl08x_driver_data *pl08x = plchan->host;
enum dma_slave_buswidth addr_width;
u32 width, burst, maxburst;
u32 cctl = 0;
if (!plchan->slave)
return -EINVAL;
/* Transfer direction */
plchan->runtime_direction = config->direction;
if (config->direction == DMA_MEM_TO_DEV) {
addr_width = config->dst_addr_width;
maxburst = config->dst_maxburst;
} else if (config->direction == DMA_DEV_TO_MEM) {
addr_width = config->src_addr_width;
maxburst = config->src_maxburst;
} else {
dev_err(&pl08x->adev->dev,
"bad runtime_config: alien transfer direction\n");
return -EINVAL;
}
width = pl08x_width(addr_width);
if (width == ~0) {
dev_err(&pl08x->adev->dev,
"bad runtime_config: alien address width\n");
return -EINVAL;
}
cctl |= width << PL080_CONTROL_SWIDTH_SHIFT;
cctl |= width << PL080_CONTROL_DWIDTH_SHIFT;
/*
* If this channel will only request single transfers, set this
* down to ONE element. Also select one element if no maxburst
* is specified.
*/
if (plchan->cd->single)
maxburst = 1;
burst = pl08x_burst(maxburst);
cctl |= burst << PL080_CONTROL_SB_SIZE_SHIFT;
cctl |= burst << PL080_CONTROL_DB_SIZE_SHIFT;
if (plchan->runtime_direction == DMA_DEV_TO_MEM) {
plchan->src_addr = config->src_addr;
plchan->src_cctl = pl08x_cctl(cctl) | PL080_CONTROL_DST_INCR |
pl08x_select_bus(plchan->cd->periph_buses,
pl08x->mem_buses);
} else {
plchan->dst_addr = config->dst_addr;
plchan->dst_cctl = pl08x_cctl(cctl) | PL080_CONTROL_SRC_INCR |
pl08x_select_bus(pl08x->mem_buses,
plchan->cd->periph_buses);
}
dev_dbg(&pl08x->adev->dev,
"configured channel %s (%s) for %s, data width %d, "
"maxburst %d words, LE, CCTL=0x%08x\n",
dma_chan_name(chan), plchan->name,
(config->direction == DMA_DEV_TO_MEM) ? "RX" : "TX",
addr_width,
maxburst,
cctl);
return 0;
}
/*
* Slave transactions callback to the slave device to allow
* synchronization of slave DMA signals with the DMAC enable
*/
static void pl08x_issue_pending(struct dma_chan *chan)
{
struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
unsigned long flags;
spin_lock_irqsave(&plchan->lock, flags);
/* Something is already active, or we're waiting for a channel... */
if (plchan->at || plchan->state == PL08X_CHAN_WAITING) {
spin_unlock_irqrestore(&plchan->lock, flags);
return;
}
/* Take the first element in the queue and execute it */
if (!list_empty(&plchan->pend_list)) {
struct pl08x_txd *next;
next = list_first_entry(&plchan->pend_list,
struct pl08x_txd,
node);
list_del(&next->node);
plchan->state = PL08X_CHAN_RUNNING;
pl08x_start_txd(plchan, next);
}
spin_unlock_irqrestore(&plchan->lock, flags);
}
static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan,
struct pl08x_txd *txd)
{
struct pl08x_driver_data *pl08x = plchan->host;
unsigned long flags;
int num_llis, ret;
num_llis = pl08x_fill_llis_for_desc(pl08x, txd);
if (!num_llis) {
spin_lock_irqsave(&plchan->lock, flags);
pl08x_free_txd(pl08x, txd);
spin_unlock_irqrestore(&plchan->lock, flags);
return -EINVAL;
}
spin_lock_irqsave(&plchan->lock, flags);
/*
* See if we already have a physical channel allocated,
* else this is the time to try to get one.
*/
ret = prep_phy_channel(plchan, txd);
if (ret) {
/*
* No physical channel was available.
*
* memcpy transfers can be sorted out at submission time.
*
* Slave transfers may have been denied due to platform
* channel muxing restrictions. Since there is no guarantee
* that this will ever be resolved, and the signal must be
* acquired AFTER acquiring the physical channel, we will let
* them be NACK:ed with -EBUSY here. The drivers can retry
* the prep() call if they are eager on doing this using DMA.
*/
if (plchan->slave) {
pl08x_free_txd_list(pl08x, plchan);
pl08x_free_txd(pl08x, txd);
spin_unlock_irqrestore(&plchan->lock, flags);
return -EBUSY;
}
} else
/*
* Else we're all set, paused and ready to roll, status
* will switch to PL08X_CHAN_RUNNING when we call
* issue_pending(). If there is something running on the
* channel already we don't change its state.
*/
if (plchan->state == PL08X_CHAN_IDLE)
plchan->state = PL08X_CHAN_PAUSED;
spin_unlock_irqrestore(&plchan->lock, flags);
return 0;
}
static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan,
unsigned long flags)
{
struct pl08x_txd *txd = kzalloc(sizeof(*txd), GFP_NOWAIT);
if (txd) {
dma_async_tx_descriptor_init(&txd->tx, &plchan->chan);
txd->tx.flags = flags;
txd->tx.tx_submit = pl08x_tx_submit;
INIT_LIST_HEAD(&txd->node);
INIT_LIST_HEAD(&txd->dsg_list);
/* Always enable error and terminal interrupts */
txd->ccfg = PL080_CONFIG_ERR_IRQ_MASK |
PL080_CONFIG_TC_IRQ_MASK;
}
return txd;
}
/*
* Initialize a descriptor to be used by memcpy submit
*/
static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy(
struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
size_t len, unsigned long flags)
{
struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
struct pl08x_driver_data *pl08x = plchan->host;
struct pl08x_txd *txd;
struct pl08x_sg *dsg;
int ret;
txd = pl08x_get_txd(plchan, flags);
if (!txd) {
dev_err(&pl08x->adev->dev,
"%s no memory for descriptor\n", __func__);
return NULL;
}
dsg = kzalloc(sizeof(struct pl08x_sg), GFP_NOWAIT);
if (!dsg) {
pl08x_free_txd(pl08x, txd);
dev_err(&pl08x->adev->dev, "%s no memory for pl080 sg\n",
__func__);
return NULL;
}
list_add_tail(&dsg->node, &txd->dsg_list);
txd->direction = DMA_NONE;
dsg->src_addr = src;
dsg->dst_addr = dest;
dsg->len = len;
/* Set platform data for m2m */
txd->ccfg |= PL080_FLOW_MEM2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT;
txd->cctl = pl08x->pd->memcpy_channel.cctl &
~(PL080_CONTROL_DST_AHB2 | PL080_CONTROL_SRC_AHB2);
/* Both to be incremented or the code will break */
txd->cctl |= PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR;
if (pl08x->vd->dualmaster)
txd->cctl |= pl08x_select_bus(pl08x->mem_buses,
pl08x->mem_buses);
ret = pl08x_prep_channel_resources(plchan, txd);
if (ret)
return NULL;
return &txd->tx;
}
static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
struct dma_chan *chan, struct scatterlist *sgl,
unsigned int sg_len, enum dma_transfer_direction direction,
unsigned long flags)
{
struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
struct pl08x_driver_data *pl08x = plchan->host;
struct pl08x_txd *txd;
struct pl08x_sg *dsg;
struct scatterlist *sg;
dma_addr_t slave_addr;
int ret, tmp;
dev_dbg(&pl08x->adev->dev, "%s prepare transaction of %d bytes from %s\n",
__func__, sgl->length, plchan->name);
txd = pl08x_get_txd(plchan, flags);
if (!txd) {
dev_err(&pl08x->adev->dev, "%s no txd\n", __func__);
return NULL;
}
if (direction != plchan->runtime_direction)
dev_err(&pl08x->adev->dev, "%s DMA setup does not match "
"the direction configured for the PrimeCell\n",
__func__);
/*
* Set up addresses, the PrimeCell configured address
* will take precedence since this may configure the
* channel target address dynamically at runtime.
*/
txd->direction = direction;
if (direction == DMA_MEM_TO_DEV) {
txd->cctl = plchan->dst_cctl;
slave_addr = plchan->dst_addr;
} else if (direction == DMA_DEV_TO_MEM) {
txd->cctl = plchan->src_cctl;
slave_addr = plchan->src_addr;
} else {
pl08x_free_txd(pl08x, txd);
dev_err(&pl08x->adev->dev,
"%s direction unsupported\n", __func__);
return NULL;
}
if (plchan->cd->device_fc)
tmp = (direction == DMA_MEM_TO_DEV) ? PL080_FLOW_MEM2PER_PER :
PL080_FLOW_PER2MEM_PER;
else
tmp = (direction == DMA_MEM_TO_DEV) ? PL080_FLOW_MEM2PER :
PL080_FLOW_PER2MEM;
txd->ccfg |= tmp << PL080_CONFIG_FLOW_CONTROL_SHIFT;
for_each_sg(sgl, sg, sg_len, tmp) {
dsg = kzalloc(sizeof(struct pl08x_sg), GFP_NOWAIT);
if (!dsg) {
pl08x_free_txd(pl08x, txd);
dev_err(&pl08x->adev->dev, "%s no mem for pl080 sg\n",
__func__);
return NULL;
}
list_add_tail(&dsg->node, &txd->dsg_list);
dsg->len = sg_dma_len(sg);
if (direction == DMA_MEM_TO_DEV) {
dsg->src_addr = sg_phys(sg);
dsg->dst_addr = slave_addr;
} else {
dsg->src_addr = slave_addr;
dsg->dst_addr = sg_phys(sg);
}
}
ret = pl08x_prep_channel_resources(plchan, txd);
if (ret)
return NULL;
return &txd->tx;
}
static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
unsigned long arg)
{
struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
struct pl08x_driver_data *pl08x = plchan->host;
unsigned long flags;
int ret = 0;
/* Controls applicable to inactive channels */
if (cmd == DMA_SLAVE_CONFIG) {
return dma_set_runtime_config(chan,
(struct dma_slave_config *)arg);
}
/*
* Anything succeeds on channels with no physical allocation and
* no queued transfers.
*/
spin_lock_irqsave(&plchan->lock, flags);
if (!plchan->phychan && !plchan->at) {
spin_unlock_irqrestore(&plchan->lock, flags);
return 0;
}
switch (cmd) {
case DMA_TERMINATE_ALL:
plchan->state = PL08X_CHAN_IDLE;
if (plchan->phychan) {
pl08x_terminate_phy_chan(pl08x, plchan->phychan);
/*
* Mark physical channel as free and free any slave
* signal
*/
release_phy_channel(plchan);
}
/* Dequeue jobs and free LLIs */
if (plchan->at) {
pl08x_free_txd(pl08x, plchan->at);
plchan->at = NULL;
}
/* Dequeue jobs not yet fired as well */
pl08x_free_txd_list(pl08x, plchan);
break;
case DMA_PAUSE:
pl08x_pause_phy_chan(plchan->phychan);
plchan->state = PL08X_CHAN_PAUSED;
break;
case DMA_RESUME:
pl08x_resume_phy_chan(plchan->phychan);
plchan->state = PL08X_CHAN_RUNNING;
break;
default:
/* Unknown command */
ret = -ENXIO;
break;
}
spin_unlock_irqrestore(&plchan->lock, flags);
return ret;
}
bool pl08x_filter_id(struct dma_chan *chan, void *chan_id)
{
struct pl08x_dma_chan *plchan;
char *name = chan_id;
/* Reject channels for devices not bound to this driver */
if (chan->device->dev->driver != &pl08x_amba_driver.drv)
return false;
plchan = to_pl08x_chan(chan);
/* Check that the channel is not taken! */
if (!strcmp(plchan->name, name))
return true;
return false;
}
/*
* Just check that the device is there and active
* TODO: turn this bit on/off depending on the number of physical channels
* actually used, if it is zero... well shut it off. That will save some
* power. Cut the clock at the same time.
*/
static void pl08x_ensure_on(struct pl08x_driver_data *pl08x)
{
writel(PL080_CONFIG_ENABLE, pl08x->base + PL080_CONFIG);
}
static void pl08x_unmap_buffers(struct pl08x_txd *txd)
{
struct device *dev = txd->tx.chan->device->dev;
struct pl08x_sg *dsg;
if (!(txd->tx.flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
if (txd->tx.flags & DMA_COMPL_SRC_UNMAP_SINGLE)
list_for_each_entry(dsg, &txd->dsg_list, node)
dma_unmap_single(dev, dsg->src_addr, dsg->len,
DMA_TO_DEVICE);
else {
list_for_each_entry(dsg, &txd->dsg_list, node)
dma_unmap_page(dev, dsg->src_addr, dsg->len,
DMA_TO_DEVICE);
}
}
if (!(txd->tx.flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
if (txd->tx.flags & DMA_COMPL_DEST_UNMAP_SINGLE)
list_for_each_entry(dsg, &txd->dsg_list, node)
dma_unmap_single(dev, dsg->dst_addr, dsg->len,
DMA_FROM_DEVICE);
else
list_for_each_entry(dsg, &txd->dsg_list, node)
dma_unmap_page(dev, dsg->dst_addr, dsg->len,
DMA_FROM_DEVICE);
}
}
static void pl08x_tasklet(unsigned long data)
{
struct pl08x_dma_chan *plchan = (struct pl08x_dma_chan *) data;
struct pl08x_driver_data *pl08x = plchan->host;
struct pl08x_txd *txd;
unsigned long flags;
spin_lock_irqsave(&plchan->lock, flags);
txd = plchan->at;
plchan->at = NULL;
if (txd) {
/* Update last completed */
plchan->lc = txd->tx.cookie;
}
/* If a new descriptor is queued, set it up plchan->at is NULL here */
if (!list_empty(&plchan->pend_list)) {
struct pl08x_txd *next;
next = list_first_entry(&plchan->pend_list,
struct pl08x_txd,
node);
list_del(&next->node);
pl08x_start_txd(plchan, next);
} else if (plchan->phychan_hold) {
/*
* This channel is still in use - we have a new txd being
* prepared and will soon be queued. Don't give up the
* physical channel.
*/
} else {
struct pl08x_dma_chan *waiting = NULL;
/*
* No more jobs, so free up the physical channel
* Free any allocated signal on slave transfers too
*/
release_phy_channel(plchan);
plchan->state = PL08X_CHAN_IDLE;
/*
* And NOW before anyone else can grab that free:d up
* physical channel, see if there is some memcpy pending
* that seriously needs to start because of being stacked
* up while we were choking the physical channels with data.
*/
list_for_each_entry(waiting, &pl08x->memcpy.channels,
chan.device_node) {
if (waiting->state == PL08X_CHAN_WAITING &&
waiting->waiting != NULL) {
int ret;
/* This should REALLY not fail now */
ret = prep_phy_channel(waiting,
waiting->waiting);
BUG_ON(ret);
waiting->phychan_hold--;
waiting->state = PL08X_CHAN_RUNNING;
waiting->waiting = NULL;
pl08x_issue_pending(&waiting->chan);
break;
}
}
}
spin_unlock_irqrestore(&plchan->lock, flags);
if (txd) {
dma_async_tx_callback callback = txd->tx.callback;
void *callback_param = txd->tx.callback_param;
/* Don't try to unmap buffers on slave channels */
if (!plchan->slave)
pl08x_unmap_buffers(txd);
/* Free the descriptor */
spin_lock_irqsave(&plchan->lock, flags);
pl08x_free_txd(pl08x, txd);
spin_unlock_irqrestore(&plchan->lock, flags);
/* Callback to signal completion */
if (callback)
callback(callback_param);
}
}
static irqreturn_t pl08x_irq(int irq, void *dev)
{
struct pl08x_driver_data *pl08x = dev;
u32 mask = 0, err, tc, i;
/* check & clear - ERR & TC interrupts */
err = readl(pl08x->base + PL080_ERR_STATUS);
if (err) {
dev_err(&pl08x->adev->dev, "%s error interrupt, register value 0x%08x\n",
__func__, err);
writel(err, pl08x->base + PL080_ERR_CLEAR);
}
tc = readl(pl08x->base + PL080_INT_STATUS);
if (tc)
writel(tc, pl08x->base + PL080_TC_CLEAR);
if (!err && !tc)
return IRQ_NONE;
for (i = 0; i < pl08x->vd->channels; i++) {
if (((1 << i) & err) || ((1 << i) & tc)) {
/* Locate physical channel */
struct pl08x_phy_chan *phychan = &pl08x->phy_chans[i];
struct pl08x_dma_chan *plchan = phychan->serving;
if (!plchan) {
dev_err(&pl08x->adev->dev,
"%s Error TC interrupt on unused channel: 0x%08x\n",
__func__, i);
continue;
}
/* Schedule tasklet on this channel */
tasklet_schedule(&plchan->tasklet);
mask |= (1 << i);
}
}
return mask ? IRQ_HANDLED : IRQ_NONE;
}
static void pl08x_dma_slave_init(struct pl08x_dma_chan *chan)
{
u32 cctl = pl08x_cctl(chan->cd->cctl);
chan->slave = true;
chan->name = chan->cd->bus_id;
chan->src_addr = chan->cd->addr;
chan->dst_addr = chan->cd->addr;
chan->src_cctl = cctl | PL080_CONTROL_DST_INCR |
pl08x_select_bus(chan->cd->periph_buses, chan->host->mem_buses);
chan->dst_cctl = cctl | PL080_CONTROL_SRC_INCR |
pl08x_select_bus(chan->host->mem_buses, chan->cd->periph_buses);
}
/*
* Initialise the DMAC memcpy/slave channels.
* Make a local wrapper to hold required data
*/
static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x,
struct dma_device *dmadev, unsigned int channels, bool slave)
{
struct pl08x_dma_chan *chan;
int i;
INIT_LIST_HEAD(&dmadev->channels);
/*
* Register as many many memcpy as we have physical channels,
* we won't always be able to use all but the code will have
* to cope with that situation.
*/
for (i = 0; i < channels; i++) {
chan = kzalloc(sizeof(*chan), GFP_KERNEL);
if (!chan) {
dev_err(&pl08x->adev->dev,
"%s no memory for channel\n", __func__);
return -ENOMEM;
}
chan->host = pl08x;
chan->state = PL08X_CHAN_IDLE;
if (slave) {
chan->cd = &pl08x->pd->slave_channels[i];
pl08x_dma_slave_init(chan);
} else {
chan->cd = &pl08x->pd->memcpy_channel;
chan->name = kasprintf(GFP_KERNEL, "memcpy%d", i);
if (!chan->name) {
kfree(chan);
return -ENOMEM;
}
}
if (chan->cd->circular_buffer) {
dev_err(&pl08x->adev->dev,
"channel %s: circular buffers not supported\n",
chan->name);
kfree(chan);
continue;
}
dev_dbg(&pl08x->adev->dev,
"initialize virtual channel \"%s\"\n",
chan->name);
chan->chan.device = dmadev;
chan->chan.cookie = 0;
chan->lc = 0;
spin_lock_init(&chan->lock);
INIT_LIST_HEAD(&chan->pend_list);
tasklet_init(&chan->tasklet, pl08x_tasklet,
(unsigned long) chan);
list_add_tail(&chan->chan.device_node, &dmadev->channels);
}
dev_info(&pl08x->adev->dev, "initialized %d virtual %s channels\n",
i, slave ? "slave" : "memcpy");
return i;
}
static void pl08x_free_virtual_channels(struct dma_device *dmadev)
{
struct pl08x_dma_chan *chan = NULL;
struct pl08x_dma_chan *next;
list_for_each_entry_safe(chan,
next, &dmadev->channels, chan.device_node) {
list_del(&chan->chan.device_node);
kfree(chan);
}
}
#ifdef CONFIG_DEBUG_FS
static const char *pl08x_state_str(enum pl08x_dma_chan_state state)
{
switch (state) {
case PL08X_CHAN_IDLE:
return "idle";
case PL08X_CHAN_RUNNING:
return "running";
case PL08X_CHAN_PAUSED:
return "paused";
case PL08X_CHAN_WAITING:
return "waiting";
default:
break;
}
return "UNKNOWN STATE";
}
static int pl08x_debugfs_show(struct seq_file *s, void *data)
{
struct pl08x_driver_data *pl08x = s->private;
struct pl08x_dma_chan *chan;
struct pl08x_phy_chan *ch;
unsigned long flags;
int i;
seq_printf(s, "PL08x physical channels:\n");
seq_printf(s, "CHANNEL:\tUSER:\n");
seq_printf(s, "--------\t-----\n");
for (i = 0; i < pl08x->vd->channels; i++) {
struct pl08x_dma_chan *virt_chan;
ch = &pl08x->phy_chans[i];
spin_lock_irqsave(&ch->lock, flags);
virt_chan = ch->serving;
seq_printf(s, "%d\t\t%s\n",
ch->id, virt_chan ? virt_chan->name : "(none)");
spin_unlock_irqrestore(&ch->lock, flags);
}
seq_printf(s, "\nPL08x virtual memcpy channels:\n");
seq_printf(s, "CHANNEL:\tSTATE:\n");
seq_printf(s, "--------\t------\n");
list_for_each_entry(chan, &pl08x->memcpy.channels, chan.device_node) {
seq_printf(s, "%s\t\t%s\n", chan->name,
pl08x_state_str(chan->state));
}
seq_printf(s, "\nPL08x virtual slave channels:\n");
seq_printf(s, "CHANNEL:\tSTATE:\n");
seq_printf(s, "--------\t------\n");
list_for_each_entry(chan, &pl08x->slave.channels, chan.device_node) {
seq_printf(s, "%s\t\t%s\n", chan->name,
pl08x_state_str(chan->state));
}
return 0;
}
static int pl08x_debugfs_open(struct inode *inode, struct file *file)
{
return single_open(file, pl08x_debugfs_show, inode->i_private);
}
static const struct file_operations pl08x_debugfs_operations = {
.open = pl08x_debugfs_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static void init_pl08x_debugfs(struct pl08x_driver_data *pl08x)
{
/* Expose a simple debugfs interface to view all clocks */
(void) debugfs_create_file(dev_name(&pl08x->adev->dev),
S_IFREG | S_IRUGO, NULL, pl08x,
&pl08x_debugfs_operations);
}
#else
static inline void init_pl08x_debugfs(struct pl08x_driver_data *pl08x)
{
}
#endif
static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
{
struct pl08x_driver_data *pl08x;
const struct vendor_data *vd = id->data;
int ret = 0;
int i;
ret = amba_request_regions(adev, NULL);
if (ret)
return ret;
/* Create the driver state holder */
pl08x = kzalloc(sizeof(*pl08x), GFP_KERNEL);
if (!pl08x) {
ret = -ENOMEM;
goto out_no_pl08x;
}
pm_runtime_set_active(&adev->dev);
pm_runtime_enable(&adev->dev);
/* Initialize memcpy engine */
dma_cap_set(DMA_MEMCPY, pl08x->memcpy.cap_mask);
pl08x->memcpy.dev = &adev->dev;
pl08x->memcpy.device_alloc_chan_resources = pl08x_alloc_chan_resources;
pl08x->memcpy.device_free_chan_resources = pl08x_free_chan_resources;
pl08x->memcpy.device_prep_dma_memcpy = pl08x_prep_dma_memcpy;
pl08x->memcpy.device_prep_dma_interrupt = pl08x_prep_dma_interrupt;
pl08x->memcpy.device_tx_status = pl08x_dma_tx_status;
pl08x->memcpy.device_issue_pending = pl08x_issue_pending;
pl08x->memcpy.device_control = pl08x_control;
/* Initialize slave engine */
dma_cap_set(DMA_SLAVE, pl08x->slave.cap_mask);
pl08x->slave.dev = &adev->dev;
pl08x->slave.device_alloc_chan_resources = pl08x_alloc_chan_resources;
pl08x->slave.device_free_chan_resources = pl08x_free_chan_resources;
pl08x->slave.device_prep_dma_interrupt = pl08x_prep_dma_interrupt;
pl08x->slave.device_tx_status = pl08x_dma_tx_status;
pl08x->slave.device_issue_pending = pl08x_issue_pending;
pl08x->slave.device_prep_slave_sg = pl08x_prep_slave_sg;
pl08x->slave.device_control = pl08x_control;
/* Get the platform data */
pl08x->pd = dev_get_platdata(&adev->dev);
if (!pl08x->pd) {
dev_err(&adev->dev, "no platform data supplied\n");
goto out_no_platdata;
}
/* Assign useful pointers to the driver state */
pl08x->adev = adev;
pl08x->vd = vd;
/* By default, AHB1 only. If dualmaster, from platform */
pl08x->lli_buses = PL08X_AHB1;
pl08x->mem_buses = PL08X_AHB1;
if (pl08x->vd->dualmaster) {
pl08x->lli_buses = pl08x->pd->lli_buses;
pl08x->mem_buses = pl08x->pd->mem_buses;
}
/* A DMA memory pool for LLIs, align on 1-byte boundary */
pl08x->pool = dma_pool_create(DRIVER_NAME, &pl08x->adev->dev,
PL08X_LLI_TSFR_SIZE, PL08X_ALIGN, 0);
if (!pl08x->pool) {
ret = -ENOMEM;
goto out_no_lli_pool;
}
spin_lock_init(&pl08x->lock);
pl08x->base = ioremap(adev->res.start, resource_size(&adev->res));
if (!pl08x->base) {
ret = -ENOMEM;
goto out_no_ioremap;
}
/* Turn on the PL08x */
pl08x_ensure_on(pl08x);
/* Attach the interrupt handler */
writel(0x000000FF, pl08x->base + PL080_ERR_CLEAR);
writel(0x000000FF, pl08x->base + PL080_TC_CLEAR);
ret = request_irq(adev->irq[0], pl08x_irq, IRQF_DISABLED,
DRIVER_NAME, pl08x);
if (ret) {
dev_err(&adev->dev, "%s failed to request interrupt %d\n",
__func__, adev->irq[0]);
goto out_no_irq;
}
/* Initialize physical channels */
pl08x->phy_chans = kmalloc((vd->channels * sizeof(*pl08x->phy_chans)),
GFP_KERNEL);
if (!pl08x->phy_chans) {
dev_err(&adev->dev, "%s failed to allocate "
"physical channel holders\n",
__func__);
goto out_no_phychans;
}
for (i = 0; i < vd->channels; i++) {
struct pl08x_phy_chan *ch = &pl08x->phy_chans[i];
ch->id = i;
ch->base = pl08x->base + PL080_Cx_BASE(i);
spin_lock_init(&ch->lock);
ch->serving = NULL;
ch->signal = -1;
dev_dbg(&adev->dev, "physical channel %d is %s\n",
i, pl08x_phy_channel_busy(ch) ? "BUSY" : "FREE");
}
/* Register as many memcpy channels as there are physical channels */
ret = pl08x_dma_init_virtual_channels(pl08x, &pl08x->memcpy,
pl08x->vd->channels, false);
if (ret <= 0) {
dev_warn(&pl08x->adev->dev,
"%s failed to enumerate memcpy channels - %d\n",
__func__, ret);
goto out_no_memcpy;
}
pl08x->memcpy.chancnt = ret;
/* Register slave channels */
ret = pl08x_dma_init_virtual_channels(pl08x, &pl08x->slave,
pl08x->pd->num_slave_channels, true);
if (ret <= 0) {
dev_warn(&pl08x->adev->dev,
"%s failed to enumerate slave channels - %d\n",
__func__, ret);
goto out_no_slave;
}
pl08x->slave.chancnt = ret;
ret = dma_async_device_register(&pl08x->memcpy);
if (ret) {
dev_warn(&pl08x->adev->dev,
"%s failed to register memcpy as an async device - %d\n",
__func__, ret);
goto out_no_memcpy_reg;
}
ret = dma_async_device_register(&pl08x->slave);
if (ret) {
dev_warn(&pl08x->adev->dev,
"%s failed to register slave as an async device - %d\n",
__func__, ret);
goto out_no_slave_reg;
}
amba_set_drvdata(adev, pl08x);
init_pl08x_debugfs(pl08x);
dev_info(&pl08x->adev->dev, "DMA: PL%03x rev%u at 0x%08llx irq %d\n",
amba_part(adev), amba_rev(adev),
(unsigned long long)adev->res.start, adev->irq[0]);
pm_runtime_put(&adev->dev);
return 0;
out_no_slave_reg:
dma_async_device_unregister(&pl08x->memcpy);
out_no_memcpy_reg:
pl08x_free_virtual_channels(&pl08x->slave);
out_no_slave:
pl08x_free_virtual_channels(&pl08x->memcpy);
out_no_memcpy:
kfree(pl08x->phy_chans);
out_no_phychans:
free_irq(adev->irq[0], pl08x);
out_no_irq:
iounmap(pl08x->base);
out_no_ioremap:
dma_pool_destroy(pl08x->pool);
out_no_lli_pool:
out_no_platdata:
pm_runtime_put(&adev->dev);
pm_runtime_disable(&adev->dev);
kfree(pl08x);
out_no_pl08x:
amba_release_regions(adev);
return ret;
}
/* PL080 has 8 channels and the PL080 have just 2 */
static struct vendor_data vendor_pl080 = {
.channels = 8,
.dualmaster = true,
};
static struct vendor_data vendor_pl081 = {
.channels = 2,
.dualmaster = false,
};
static struct amba_id pl08x_ids[] = {
/* PL080 */
{
.id = 0x00041080,
.mask = 0x000fffff,
.data = &vendor_pl080,
},
/* PL081 */
{
.id = 0x00041081,
.mask = 0x000fffff,
.data = &vendor_pl081,
},
/* Nomadik 8815 PL080 variant */
{
.id = 0x00280880,
.mask = 0x00ffffff,
.data = &vendor_pl080,
},
{ 0, 0 },
};
MODULE_DEVICE_TABLE(amba, pl08x_ids);
static struct amba_driver pl08x_amba_driver = {
.drv.name = DRIVER_NAME,
.id_table = pl08x_ids,
.probe = pl08x_probe,
};
static int __init pl08x_init(void)
{
int retval;
retval = amba_driver_register(&pl08x_amba_driver);
if (retval)
printk(KERN_WARNING DRIVER_NAME
"failed to register as an AMBA device (%d)\n",
retval);
return retval;
}
subsys_initcall(pl08x_init);