linux/drivers/hwmon/ucd9200.c
Guenter Roeck 84fc4585c1 hwmon: (pmbus) Add support for TI UCD9200 series of PWM System Controllers
This patch adds hardware monitoring support for TI UCD9220, UCD9222, UCD9224,
UCD9240, UCD9244, UCD9246, and UCD9248 Digital PWM System Controllers.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
2011-05-19 08:19:39 -07:00

210 lines
5.6 KiB
C

/*
* Hardware monitoring driver for ucd9200 series Digital PWM System Controllers
*
* Copyright (C) 2011 Ericsson AB.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/i2c/pmbus.h>
#include "pmbus.h"
#define UCD9200_PHASE_INFO 0xd2
#define UCD9200_DEVICE_ID 0xfd
enum chips { ucd9200, ucd9220, ucd9222, ucd9224, ucd9240, ucd9244, ucd9246,
ucd9248 };
static const struct i2c_device_id ucd9200_id[] = {
{"ucd9200", ucd9200},
{"ucd9220", ucd9220},
{"ucd9222", ucd9222},
{"ucd9224", ucd9224},
{"ucd9240", ucd9240},
{"ucd9244", ucd9244},
{"ucd9246", ucd9246},
{"ucd9248", ucd9248},
{}
};
MODULE_DEVICE_TABLE(i2c, ucd9200_id);
static int ucd9200_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1];
struct pmbus_driver_info *info;
const struct i2c_device_id *mid;
int i, j, ret;
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_BLOCK_DATA))
return -ENODEV;
ret = i2c_smbus_read_block_data(client, UCD9200_DEVICE_ID,
block_buffer);
if (ret < 0) {
dev_err(&client->dev, "Failed to read device ID\n");
return ret;
}
block_buffer[ret] = '\0';
dev_info(&client->dev, "Device ID %s\n", block_buffer);
mid = NULL;
for (i = 0; i < ARRAY_SIZE(ucd9200_id); i++) {
mid = &ucd9200_id[i];
if (!strncasecmp(mid->name, block_buffer, strlen(mid->name)))
break;
}
if (!mid || !strlen(mid->name)) {
dev_err(&client->dev, "Unsupported device\n");
return -ENODEV;
}
if (id->driver_data != ucd9200 && id->driver_data != mid->driver_data)
dev_notice(&client->dev,
"Device mismatch: Configured %s, detected %s\n",
id->name, mid->name);
info = kzalloc(sizeof(struct pmbus_driver_info), GFP_KERNEL);
if (!info)
return -ENOMEM;
ret = i2c_smbus_read_block_data(client, UCD9200_PHASE_INFO,
block_buffer);
if (ret < 0) {
dev_err(&client->dev, "Failed to read phase information\n");
goto out;
}
/*
* Calculate number of configured pages (rails) from PHASE_INFO
* register.
* Rails have to be sequential, so we can abort after finding
* the first unconfigured rail.
*/
info->pages = 0;
for (i = 0; i < ret; i++) {
if (!block_buffer[i])
break;
info->pages++;
}
if (!info->pages) {
dev_err(&client->dev, "No rails configured\n");
ret = -ENODEV;
goto out;
}
dev_info(&client->dev, "%d rails configured\n", info->pages);
/*
* Set PHASE registers on all pages to 0xff to ensure that phase
* specific commands will apply to all phases of a given page (rail).
* This only affects the READ_IOUT and READ_TEMPERATURE2 registers.
* READ_IOUT will return the sum of currents of all phases of a rail,
* and READ_TEMPERATURE2 will return the maximum temperature detected
* for the the phases of the rail.
*/
for (i = 0; i < info->pages; i++) {
/*
* Setting PAGE & PHASE fails once in a while for no obvious
* reason, so we need to retry a couple of times.
*/
for (j = 0; j < 3; j++) {
ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, i);
if (ret < 0)
continue;
ret = i2c_smbus_write_byte_data(client, PMBUS_PHASE,
0xff);
if (ret < 0)
continue;
break;
}
if (ret < 0) {
dev_err(&client->dev,
"Failed to initialize PHASE registers\n");
goto out;
}
}
if (info->pages > 1)
i2c_smbus_write_byte_data(client, PMBUS_PAGE, 0);
info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT |
PMBUS_HAVE_IIN | PMBUS_HAVE_PIN |
PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP |
PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
for (i = 1; i < info->pages; i++)
info->func[i] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
PMBUS_HAVE_POUT |
PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
/* ucd9240 supports a single fan */
if (mid->driver_data == ucd9240)
info->func[0] |= PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12;
ret = pmbus_do_probe(client, mid, info);
if (ret < 0)
goto out;
return 0;
out:
kfree(info);
return ret;
}
static int ucd9200_remove(struct i2c_client *client)
{
int ret;
const struct pmbus_driver_info *info;
info = pmbus_get_driver_info(client);
ret = pmbus_do_remove(client);
kfree(info);
return ret;
}
/* This is the driver that will be inserted */
static struct i2c_driver ucd9200_driver = {
.driver = {
.name = "ucd9200",
},
.probe = ucd9200_probe,
.remove = ucd9200_remove,
.id_table = ucd9200_id,
};
static int __init ucd9200_init(void)
{
return i2c_add_driver(&ucd9200_driver);
}
static void __exit ucd9200_exit(void)
{
i2c_del_driver(&ucd9200_driver);
}
MODULE_AUTHOR("Guenter Roeck");
MODULE_DESCRIPTION("PMBus driver for TI UCD922x, UCD924x");
MODULE_LICENSE("GPL");
module_init(ucd9200_init);
module_exit(ucd9200_exit);