Grazvydas Ignotas a02a295680 wl1251: add support for dedicated IRQ line ... wl1251 has WLAN_IRQ pin for generating interrupts to host processor, which is mandatory in SPI mode and optional in SDIO mode (which can use SDIO interrupts instead). However TI recommends using deditated IRQ line for SDIO too. Add support for using dedicated interrupt line with SDIO, but also leave ability to switch to SDIO interrupts in case it's needed. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Reviewed-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>		2010-04-16 15:47:14 -04:00
..
Kconfig	wl1271: Changed wl1271_sdio to be selectable only on ARM	2010-03-10 17:44:43 -05:00
Makefile	wl1271: Initial SDIO implementation	2010-03-09 15:02:59 -05:00
wl12xx_80211.h
wl1251.h	wl1251: fix ELP_CTRL register accesses when using SDIO	2010-03-15 15:32:03 -04:00
wl1251_acx.c
wl1251_acx.h
wl1251_boot.c	wl1251: reduce eeprom read wait time	2010-03-15 15:32:04 -04:00
wl1251_boot.h
wl1251_cmd.c
wl1251_cmd.h
wl1251_debugfs.c	wl1251: fix potential crash	2010-03-16 15:20:25 -04:00
wl1251_debugfs.h
wl1251_event.c
wl1251_event.h
wl1251_init.c
wl1251_init.h
wl1251_io.c
wl1251_io.h	wl1251: fix ELP_CTRL register accesses when using SDIO	2010-03-15 15:32:03 -04:00
wl1251_main.c	wl1251: read default MAC address from EEPROM when available	2010-04-16 15:32:00 -04:00
wl1251_ps.c	wl1251: fix ELP_CTRL register accesses when using SDIO	2010-03-15 15:32:03 -04:00
wl1251_ps.h
wl1251_reg.h	wl1251: read default MAC address from EEPROM when available	2010-04-16 15:32:00 -04:00
wl1251_rx.c
wl1251_rx.h
wl1251_sdio.c	wl1251: add support for dedicated IRQ line	2010-04-16 15:47:14 -04:00
wl1251_spi.c	wl1251: use DRIVER_NAME macro in wl1251_spi_driver	2010-04-07 14:37:54 -04:00
wl1251_spi.h
wl1251_tx.c
wl1251_tx.h
wl1271.h	wl1271: Add support for connection quality monitoring	2010-04-09 13:43:11 -04:00
wl1271_acx.c	wl1271: Add support for connection quality monitoring	2010-04-09 13:43:11 -04:00
wl1271_acx.h	wl1271: Add support for connection quality monitoring	2010-04-09 13:43:11 -04:00
wl1271_boot.c	wl1271: Add support for connection quality monitoring	2010-04-09 13:43:11 -04:00
wl1271_boot.h	wl1271: Configure clock-request drive mode to open-drain	2010-03-31 14:39:12 -04:00
wl1271_cmd.c	wl1271: Configure rates for templates	2010-04-06 16:55:13 -04:00
wl1271_cmd.h	wl1271: Configure rates for templates	2010-04-06 16:55:13 -04:00
wl1271_conf.h	wl1271: Add support for connection quality monitoring	2010-04-09 13:43:11 -04:00
wl1271_debugfs.c	wl1271: Cleaned up wlan power on/off functions	2010-03-23 16:50:18 -04:00
wl1271_debugfs.h
wl1271_event.c	wl1271: Add support for connection quality monitoring	2010-04-09 13:43:11 -04:00
wl1271_event.h	wl1271: Add support for connection quality monitoring	2010-04-09 13:43:11 -04:00
wl1271_init.c	wl1271: Add support for connection quality monitoring	2010-04-09 13:43:11 -04:00
wl1271_init.h
wl1271_io.c	wl1271: Removed wl1271_spi.h and made some functions static	2010-03-09 15:02:58 -05:00
wl1271_io.h	wl1271: Changed platform_device to be dynamically allocated	2010-03-23 16:50:25 -04:00
wl1271_main.c	wl1271: Add support for connection quality monitoring	2010-04-09 13:43:11 -04:00
wl1271_ps.c	wl1271: Go to ELP in idle	2010-04-09 13:43:10 -04:00
wl1271_ps.h
wl1271_reg.h
wl1271_rx.c	wl1271: remove deprecated usage of RX status noise	2010-03-31 14:39:14 -04:00
wl1271_rx.h	wl1271: Clean up RX rate reporting	2010-03-31 14:39:11 -04:00
wl1271_sdio.c	wl1271: fix sdio driver name in wl1271_sdio_driver	2010-04-06 16:55:11 -04:00
wl1271_spi.c	wl1271: Update busyword checking mechanism	2010-03-31 14:39:13 -04:00
wl1271_testmode.c	wl1271: Removed wl1271_spi.h and made some functions static	2010-03-09 15:02:58 -05:00
wl1271_testmode.h	wl1271: add testmode support	2010-02-19 15:52:47 -05:00
wl1271_tx.c	wl1271: Fix tx queue flushing	2010-04-06 16:55:14 -04:00
wl1271_tx.h	wl1271: Use minimum rate for each band for control messages	2010-04-06 16:55:12 -04:00