linux/arch/sparc/kernel/sun4c_irq.c
Sam Ravnborg bbdc2661ea sparc32: introduce sparc_irq_config
sparc_irq_config is used to hold the platform specific irq setup.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16 18:19:13 -07:00

234 lines
5.9 KiB
C

/*
* sun4c irq support
*
* djhr: Hacked out of irq.c into a CPU dependent version.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
* Copyright (C) 1995 Miguel de Icaza (miguel@nuclecu.unam.mx)
* Copyright (C) 1995 Pete A. Zaitcev (zaitcev@yahoo.com)
* Copyright (C) 1996 Dave Redman (djhr@tadpole.co.uk)
*/
#include <linux/init.h>
#include <asm/oplib.h>
#include <asm/timer.h>
#include <asm/irq.h>
#include <asm/io.h>
#include "irq.h"
/* Sun4c interrupts are typically laid out as follows:
*
* 1 - Software interrupt, SBUS level 1
* 2 - SBUS level 2
* 3 - ESP SCSI, SBUS level 3
* 4 - Software interrupt
* 5 - Lance ethernet, SBUS level 4
* 6 - Software interrupt
* 7 - Graphics card, SBUS level 5
* 8 - SBUS level 6
* 9 - SBUS level 7
* 10 - Counter timer
* 11 - Floppy
* 12 - Zilog uart
* 13 - CS4231 audio
* 14 - Profiling timer
* 15 - NMI
*
* The interrupt enable bits in the interrupt mask register are
* really only used to enable/disable the timer interrupts, and
* for signalling software interrupts. There is also a master
* interrupt enable bit in this register.
*
* Interrupts are enabled by setting the SUN4C_INT_* bits, they
* are disabled by clearing those bits.
*/
/*
* Bit field defines for the interrupt registers on various
* Sparc machines.
*/
/* The sun4c interrupt register. */
#define SUN4C_INT_ENABLE 0x01 /* Allow interrupts. */
#define SUN4C_INT_E14 0x80 /* Enable level 14 IRQ. */
#define SUN4C_INT_E10 0x20 /* Enable level 10 IRQ. */
#define SUN4C_INT_E8 0x10 /* Enable level 8 IRQ. */
#define SUN4C_INT_E6 0x08 /* Enable level 6 IRQ. */
#define SUN4C_INT_E4 0x04 /* Enable level 4 IRQ. */
#define SUN4C_INT_E1 0x02 /* Enable level 1 IRQ. */
/*
* Pointer to the interrupt enable byte
* Used by entry.S
*/
unsigned char __iomem *interrupt_enable;
static void sun4c_disable_irq(unsigned int irq_nr)
{
unsigned long flags;
unsigned char current_mask, new_mask;
local_irq_save(flags);
irq_nr &= (NR_IRQS - 1);
current_mask = sbus_readb(interrupt_enable);
switch (irq_nr) {
case 1:
new_mask = ((current_mask) & (~(SUN4C_INT_E1)));
break;
case 8:
new_mask = ((current_mask) & (~(SUN4C_INT_E8)));
break;
case 10:
new_mask = ((current_mask) & (~(SUN4C_INT_E10)));
break;
case 14:
new_mask = ((current_mask) & (~(SUN4C_INT_E14)));
break;
default:
local_irq_restore(flags);
return;
}
sbus_writeb(new_mask, interrupt_enable);
local_irq_restore(flags);
}
static void sun4c_enable_irq(unsigned int irq_nr)
{
unsigned long flags;
unsigned char current_mask, new_mask;
local_irq_save(flags);
irq_nr &= (NR_IRQS - 1);
current_mask = sbus_readb(interrupt_enable);
switch (irq_nr) {
case 1:
new_mask = ((current_mask) | SUN4C_INT_E1);
break;
case 8:
new_mask = ((current_mask) | SUN4C_INT_E8);
break;
case 10:
new_mask = ((current_mask) | SUN4C_INT_E10);
break;
case 14:
new_mask = ((current_mask) | SUN4C_INT_E14);
break;
default:
local_irq_restore(flags);
return;
}
sbus_writeb(new_mask, interrupt_enable);
local_irq_restore(flags);
}
struct sun4c_timer_info {
u32 l10_count;
u32 l10_limit;
u32 l14_count;
u32 l14_limit;
};
static struct sun4c_timer_info __iomem *sun4c_timers;
static void sun4c_clear_clock_irq(void)
{
sbus_readl(&sun4c_timers->l10_limit);
}
static void sun4c_load_profile_irq(int cpu, unsigned int limit)
{
/* Errm.. not sure how to do this.. */
}
static void __init sun4c_init_timers(irq_handler_t counter_fn)
{
const struct linux_prom_irqs *irq;
struct device_node *dp;
const u32 *addr;
int err;
dp = of_find_node_by_name(NULL, "counter-timer");
if (!dp) {
prom_printf("sun4c_init_timers: Unable to find counter-timer\n");
prom_halt();
}
addr = of_get_property(dp, "address", NULL);
if (!addr) {
prom_printf("sun4c_init_timers: No address property\n");
prom_halt();
}
sun4c_timers = (void __iomem *) (unsigned long) addr[0];
irq = of_get_property(dp, "intr", NULL);
of_node_put(dp);
if (!irq) {
prom_printf("sun4c_init_timers: No intr property\n");
prom_halt();
}
/* Have the level 10 timer tick at 100HZ. We don't touch the
* level 14 timer limit since we are letting the prom handle
* them until we have a real console driver so L1-A works.
*/
sbus_writel((((1000000/HZ) + 1) << 10), &sun4c_timers->l10_limit);
master_l10_counter = &sun4c_timers->l10_count;
err = request_irq(irq[0].pri, counter_fn,
(IRQF_DISABLED | SA_STATIC_ALLOC),
"timer", NULL);
if (err) {
prom_printf("sun4c_init_timers: request_irq() fails with %d\n", err);
prom_halt();
}
sun4c_disable_irq(irq[1].pri);
}
#ifdef CONFIG_SMP
static void sun4c_nop(void)
{
}
#endif
void __init sun4c_init_IRQ(void)
{
struct device_node *dp;
const u32 *addr;
dp = of_find_node_by_name(NULL, "interrupt-enable");
if (!dp) {
prom_printf("sun4c_init_IRQ: Unable to find interrupt-enable\n");
prom_halt();
}
addr = of_get_property(dp, "address", NULL);
of_node_put(dp);
if (!addr) {
prom_printf("sun4c_init_IRQ: No address property\n");
prom_halt();
}
interrupt_enable = (void __iomem *) (unsigned long) addr[0];
BTFIXUPSET_CALL(enable_irq, sun4c_enable_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(disable_irq, sun4c_disable_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(enable_pil_irq, sun4c_enable_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(disable_pil_irq, sun4c_disable_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(clear_clock_irq, sun4c_clear_clock_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(load_profile_irq, sun4c_load_profile_irq, BTFIXUPCALL_NOP);
sparc_irq_config.init_timers = sun4c_init_timers;
#ifdef CONFIG_SMP
BTFIXUPSET_CALL(set_cpu_int, sun4c_nop, BTFIXUPCALL_NOP);
BTFIXUPSET_CALL(clear_cpu_int, sun4c_nop, BTFIXUPCALL_NOP);
BTFIXUPSET_CALL(set_irq_udt, sun4c_nop, BTFIXUPCALL_NOP);
#endif
sbus_writeb(SUN4C_INT_ENABLE, interrupt_enable);
/* Cannot enable interrupts until OBP ticker is disabled. */
}