linux/drivers/virtio/virtio.c
Nicholas Bellinger 59057fbc37 [SCSI] virtio-scsi: Add vdrv->scan for post VIRTIO_CONFIG_S_DRIVER_OK LUN scanning
This patch changes virtio-scsi to use a new virtio_driver->scan() callback
so that scsi_scan_host() can be properly invoked once virtio_dev_probe() has
set add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK) to signal active virtio-ring
operation, instead of from within virtscsi_probe().

This fixes a bug where SCSI LUN scanning for both virtio-scsi-raw and
virtio-scsi/tcm_vhost setups was happening before VIRTIO_CONFIG_S_DRIVER_OK
had been set, causing VIRTIO_SCSI_S_BAD_TARGET to occur.  This fixes a bug
with virtio-scsi/tcm_vhost where LUN scan was not detecting LUNs.

Tested with virtio-scsi-raw + virtio-scsi/tcm_vhost w/ IBLOCK on 3.5-rc2 code.

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20 08:59:03 +01:00

247 lines
6.7 KiB
C

#include <linux/virtio.h>
#include <linux/spinlock.h>
#include <linux/virtio_config.h>
#include <linux/module.h>
#include <linux/idr.h>
/* Unique numbering for virtio devices. */
static DEFINE_IDA(virtio_index_ida);
static ssize_t device_show(struct device *_d,
struct device_attribute *attr, char *buf)
{
struct virtio_device *dev = container_of(_d,struct virtio_device,dev);
return sprintf(buf, "0x%04x\n", dev->id.device);
}
static ssize_t vendor_show(struct device *_d,
struct device_attribute *attr, char *buf)
{
struct virtio_device *dev = container_of(_d,struct virtio_device,dev);
return sprintf(buf, "0x%04x\n", dev->id.vendor);
}
static ssize_t status_show(struct device *_d,
struct device_attribute *attr, char *buf)
{
struct virtio_device *dev = container_of(_d,struct virtio_device,dev);
return sprintf(buf, "0x%08x\n", dev->config->get_status(dev));
}
static ssize_t modalias_show(struct device *_d,
struct device_attribute *attr, char *buf)
{
struct virtio_device *dev = container_of(_d,struct virtio_device,dev);
return sprintf(buf, "virtio:d%08Xv%08X\n",
dev->id.device, dev->id.vendor);
}
static ssize_t features_show(struct device *_d,
struct device_attribute *attr, char *buf)
{
struct virtio_device *dev = container_of(_d, struct virtio_device, dev);
unsigned int i;
ssize_t len = 0;
/* We actually represent this as a bitstring, as it could be
* arbitrary length in future. */
for (i = 0; i < ARRAY_SIZE(dev->features)*BITS_PER_LONG; i++)
len += sprintf(buf+len, "%c",
test_bit(i, dev->features) ? '1' : '0');
len += sprintf(buf+len, "\n");
return len;
}
static struct device_attribute virtio_dev_attrs[] = {
__ATTR_RO(device),
__ATTR_RO(vendor),
__ATTR_RO(status),
__ATTR_RO(modalias),
__ATTR_RO(features),
__ATTR_NULL
};
static inline int virtio_id_match(const struct virtio_device *dev,
const struct virtio_device_id *id)
{
if (id->device != dev->id.device && id->device != VIRTIO_DEV_ANY_ID)
return 0;
return id->vendor == VIRTIO_DEV_ANY_ID || id->vendor == dev->id.vendor;
}
/* This looks through all the IDs a driver claims to support. If any of them
* match, we return 1 and the kernel will call virtio_dev_probe(). */
static int virtio_dev_match(struct device *_dv, struct device_driver *_dr)
{
unsigned int i;
struct virtio_device *dev = container_of(_dv,struct virtio_device,dev);
const struct virtio_device_id *ids;
ids = container_of(_dr, struct virtio_driver, driver)->id_table;
for (i = 0; ids[i].device; i++)
if (virtio_id_match(dev, &ids[i]))
return 1;
return 0;
}
static int virtio_uevent(struct device *_dv, struct kobj_uevent_env *env)
{
struct virtio_device *dev = container_of(_dv,struct virtio_device,dev);
return add_uevent_var(env, "MODALIAS=virtio:d%08Xv%08X",
dev->id.device, dev->id.vendor);
}
static void add_status(struct virtio_device *dev, unsigned status)
{
dev->config->set_status(dev, dev->config->get_status(dev) | status);
}
void virtio_check_driver_offered_feature(const struct virtio_device *vdev,
unsigned int fbit)
{
unsigned int i;
struct virtio_driver *drv = container_of(vdev->dev.driver,
struct virtio_driver, driver);
for (i = 0; i < drv->feature_table_size; i++)
if (drv->feature_table[i] == fbit)
return;
BUG();
}
EXPORT_SYMBOL_GPL(virtio_check_driver_offered_feature);
static int virtio_dev_probe(struct device *_d)
{
int err, i;
struct virtio_device *dev = container_of(_d,struct virtio_device,dev);
struct virtio_driver *drv = container_of(dev->dev.driver,
struct virtio_driver, driver);
u32 device_features;
/* We have a driver! */
add_status(dev, VIRTIO_CONFIG_S_DRIVER);
/* Figure out what features the device supports. */
device_features = dev->config->get_features(dev);
/* Features supported by both device and driver into dev->features. */
memset(dev->features, 0, sizeof(dev->features));
for (i = 0; i < drv->feature_table_size; i++) {
unsigned int f = drv->feature_table[i];
BUG_ON(f >= 32);
if (device_features & (1 << f))
set_bit(f, dev->features);
}
/* Transport features always preserved to pass to finalize_features. */
for (i = VIRTIO_TRANSPORT_F_START; i < VIRTIO_TRANSPORT_F_END; i++)
if (device_features & (1 << i))
set_bit(i, dev->features);
dev->config->finalize_features(dev);
err = drv->probe(dev);
if (err)
add_status(dev, VIRTIO_CONFIG_S_FAILED);
else {
add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK);
if (drv->scan)
drv->scan(dev);
}
return err;
}
static int virtio_dev_remove(struct device *_d)
{
struct virtio_device *dev = container_of(_d,struct virtio_device,dev);
struct virtio_driver *drv = container_of(dev->dev.driver,
struct virtio_driver, driver);
drv->remove(dev);
/* Driver should have reset device. */
BUG_ON(dev->config->get_status(dev));
/* Acknowledge the device's existence again. */
add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE);
return 0;
}
static struct bus_type virtio_bus = {
.name = "virtio",
.match = virtio_dev_match,
.dev_attrs = virtio_dev_attrs,
.uevent = virtio_uevent,
.probe = virtio_dev_probe,
.remove = virtio_dev_remove,
};
int register_virtio_driver(struct virtio_driver *driver)
{
/* Catch this early. */
BUG_ON(driver->feature_table_size && !driver->feature_table);
driver->driver.bus = &virtio_bus;
return driver_register(&driver->driver);
}
EXPORT_SYMBOL_GPL(register_virtio_driver);
void unregister_virtio_driver(struct virtio_driver *driver)
{
driver_unregister(&driver->driver);
}
EXPORT_SYMBOL_GPL(unregister_virtio_driver);
int register_virtio_device(struct virtio_device *dev)
{
int err;
dev->dev.bus = &virtio_bus;
/* Assign a unique device index and hence name. */
err = ida_simple_get(&virtio_index_ida, 0, 0, GFP_KERNEL);
if (err < 0)
goto out;
dev->index = err;
dev_set_name(&dev->dev, "virtio%u", dev->index);
/* We always start by resetting the device, in case a previous
* driver messed it up. This also tests that code path a little. */
dev->config->reset(dev);
/* Acknowledge that we've seen the device. */
add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE);
INIT_LIST_HEAD(&dev->vqs);
/* device_register() causes the bus infrastructure to look for a
* matching driver. */
err = device_register(&dev->dev);
out:
if (err)
add_status(dev, VIRTIO_CONFIG_S_FAILED);
return err;
}
EXPORT_SYMBOL_GPL(register_virtio_device);
void unregister_virtio_device(struct virtio_device *dev)
{
device_unregister(&dev->dev);
ida_simple_remove(&virtio_index_ida, dev->index);
}
EXPORT_SYMBOL_GPL(unregister_virtio_device);
static int virtio_init(void)
{
if (bus_register(&virtio_bus) != 0)
panic("virtio bus registration failed");
return 0;
}
static void __exit virtio_exit(void)
{
bus_unregister(&virtio_bus);
}
core_initcall(virtio_init);
module_exit(virtio_exit);
MODULE_LICENSE("GPL");