/* * This file is provided under a dual BSD/GPLv2 license. When using or * redistributing this file, you may do so under either license. * * GPL LICENSE SUMMARY * * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. * The full GNU General Public License is included in this distribution * in the file called LICENSE.GPL. * * BSD LICENSE * * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name of Intel Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include "isci.h" #include "host.h" #include "phy.h" #include "scu_event_codes.h" #include "timers.h" #include "probe_roms.h" /* Maximum arbitration wait time in micro-seconds */ #define SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME (700) enum sas_linkrate sci_phy_linkrate(struct scic_sds_phy *sci_phy) { return sci_phy->max_negotiated_speed; } /* * ***************************************************************************** * * SCIC SDS PHY Internal Methods * ***************************************************************************** */ /** * This method will initialize the phy transport layer registers * @sci_phy: * @transport_layer_registers * * enum sci_status */ static enum sci_status scic_sds_phy_transport_layer_initialization( struct scic_sds_phy *sci_phy, struct scu_transport_layer_registers __iomem *transport_layer_registers) { u32 tl_control; sci_phy->transport_layer_registers = transport_layer_registers; writel(SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX, &sci_phy->transport_layer_registers->stp_rni); /* * Hardware team recommends that we enable the STP prefetch for all * transports */ tl_control = readl(&sci_phy->transport_layer_registers->control); tl_control |= SCU_TLCR_GEN_BIT(STP_WRITE_DATA_PREFETCH); writel(tl_control, &sci_phy->transport_layer_registers->control); return SCI_SUCCESS; } /** * This method will initialize the phy link layer registers * @sci_phy: * @link_layer_registers: * * enum sci_status */ static enum sci_status scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, struct scu_link_layer_registers __iomem *link_layer_registers) { struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller; int phy_idx = sci_phy->phy_index; struct sci_phy_user_params *phy_user = &scic->user_parameters.sds1.phys[phy_idx]; struct sci_phy_oem_params *phy_oem = &scic->oem_parameters.sds1.phys[phy_idx]; u32 phy_configuration; struct scic_phy_cap phy_cap; u32 parity_check = 0; u32 parity_count = 0; u32 llctl, link_rate; u32 clksm_value = 0; sci_phy->link_layer_registers = link_layer_registers; /* Set our IDENTIFY frame data */ #define SCI_END_DEVICE 0x01 writel(SCU_SAS_TIID_GEN_BIT(SMP_INITIATOR) | SCU_SAS_TIID_GEN_BIT(SSP_INITIATOR) | SCU_SAS_TIID_GEN_BIT(STP_INITIATOR) | SCU_SAS_TIID_GEN_BIT(DA_SATA_HOST) | SCU_SAS_TIID_GEN_VAL(DEVICE_TYPE, SCI_END_DEVICE), &sci_phy->link_layer_registers->transmit_identification); /* Write the device SAS Address */ writel(0xFEDCBA98, &sci_phy->link_layer_registers->sas_device_name_high); writel(phy_idx, &sci_phy->link_layer_registers->sas_device_name_low); /* Write the source SAS Address */ writel(phy_oem->sas_address.high, &sci_phy->link_layer_registers->source_sas_address_high); writel(phy_oem->sas_address.low, &sci_phy->link_layer_registers->source_sas_address_low); /* Clear and Set the PHY Identifier */ writel(0, &sci_phy->link_layer_registers->identify_frame_phy_id); writel(SCU_SAS_TIPID_GEN_VALUE(ID, phy_idx), &sci_phy->link_layer_registers->identify_frame_phy_id); /* Change the initial state of the phy configuration register */ phy_configuration = readl(&sci_phy->link_layer_registers->phy_configuration); /* Hold OOB state machine in reset */ phy_configuration |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET); writel(phy_configuration, &sci_phy->link_layer_registers->phy_configuration); /* Configure the SNW capabilities */ phy_cap.all = 0; phy_cap.start = 1; phy_cap.gen3_no_ssc = 1; phy_cap.gen2_no_ssc = 1; phy_cap.gen1_no_ssc = 1; if (scic->oem_parameters.sds1.controller.do_enable_ssc == true) { phy_cap.gen3_ssc = 1; phy_cap.gen2_ssc = 1; phy_cap.gen1_ssc = 1; } /* * The SAS specification indicates that the phy_capabilities that * are transmitted shall have an even parity. Calculate the parity. */ parity_check = phy_cap.all; while (parity_check != 0) { if (parity_check & 0x1) parity_count++; parity_check >>= 1; } /* * If parity indicates there are an odd number of bits set, then * set the parity bit to 1 in the phy capabilities. */ if ((parity_count % 2) != 0) phy_cap.parity = 1; writel(phy_cap.all, &sci_phy->link_layer_registers->phy_capabilities); /* Set the enable spinup period but disable the ability to send * notify enable spinup */ writel(SCU_ENSPINUP_GEN_VAL(COUNT, phy_user->notify_enable_spin_up_insertion_frequency), &sci_phy->link_layer_registers->notify_enable_spinup_control); /* Write the ALIGN Insertion Ferequency for connected phy and * inpendent of connected state */ clksm_value = SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(CONNECTED, phy_user->in_connection_align_insertion_frequency); clksm_value |= SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(GENERAL, phy_user->align_insertion_frequency); writel(clksm_value, &sci_phy->link_layer_registers->clock_skew_management); /* @todo Provide a way to write this register correctly */ writel(0x02108421, &sci_phy->link_layer_registers->afe_lookup_table_control); llctl = SCU_SAS_LLCTL_GEN_VAL(NO_OUTBOUND_TASK_TIMEOUT, (u8)scic->user_parameters.sds1.no_outbound_task_timeout); switch(phy_user->max_speed_generation) { case SCIC_SDS_PARM_GEN3_SPEED: link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN3; break; case SCIC_SDS_PARM_GEN2_SPEED: link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN2; break; default: link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1; break; } llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate); writel(llctl, &sci_phy->link_layer_registers->link_layer_control); if (is_a0() || is_a2()) { /* Program the max ARB time for the PHY to 700us so we inter-operate with * the PMC expander which shuts down PHYs if the expander PHY generates too * many breaks. This time value will guarantee that the initiator PHY will * generate the break. */ writel(SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME, &sci_phy->link_layer_registers->maximum_arbitration_wait_timer_timeout); } /* * Set the link layer hang detection to 500ms (0x1F4) from its default * value of 128ms. Max value is 511 ms. */ writel(0x1F4, &sci_phy->link_layer_registers->link_layer_hang_detection_timeout); /* We can exit the initial state to the stopped state */ sci_base_state_machine_change_state(&sci_phy->state_machine, SCI_BASE_PHY_STATE_STOPPED); return SCI_SUCCESS; } /** * This function will handle the sata SIGNATURE FIS timeout condition. It will * restart the starting substate machine since we dont know what has actually * happening. */ static void scic_sds_phy_sata_timeout(void *phy) { struct scic_sds_phy *sci_phy = phy; dev_dbg(sciphy_to_dev(sci_phy), "%s: SCIC SDS Phy 0x%p did not receive signature fis before " "timeout.\n", __func__, sci_phy); sci_base_state_machine_change_state(&sci_phy->state_machine, SCI_BASE_PHY_STATE_STARTING); } /** * This method returns the port currently containing this phy. If the phy is * currently contained by the dummy port, then the phy is considered to not * be part of a port. * @sci_phy: This parameter specifies the phy for which to retrieve the * containing port. * * This method returns a handle to a port that contains the supplied phy. * NULL This value is returned if the phy is not part of a real * port (i.e. it's contained in the dummy port). !NULL All other * values indicate a handle/pointer to the port containing the phy. */ struct scic_sds_port *scic_sds_phy_get_port( struct scic_sds_phy *sci_phy) { if (scic_sds_port_get_index(sci_phy->owning_port) == SCIC_SDS_DUMMY_PORT) return NULL; return sci_phy->owning_port; } /** * This method will assign a port to the phy object. * @out]: sci_phy This parameter specifies the phy for which to assign a port * object. * * */ void scic_sds_phy_set_port( struct scic_sds_phy *sci_phy, struct scic_sds_port *sci_port) { sci_phy->owning_port = sci_port; if (sci_phy->bcn_received_while_port_unassigned) { sci_phy->bcn_received_while_port_unassigned = false; scic_sds_port_broadcast_change_received(sci_phy->owning_port, sci_phy); } } /** * This method will initialize the constructed phy * @sci_phy: * @link_layer_registers: * * enum sci_status */ enum sci_status scic_sds_phy_initialize( struct scic_sds_phy *sci_phy, struct scu_transport_layer_registers __iomem *transport_layer_registers, struct scu_link_layer_registers __iomem *link_layer_registers) { struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy); struct isci_host *ihost = scic_to_ihost(scic); /* Create the SIGNATURE FIS Timeout timer for this phy */ sci_phy->sata_timeout_timer = isci_timer_create( ihost, sci_phy, scic_sds_phy_sata_timeout); /* Perfrom the initialization of the TL hardware */ scic_sds_phy_transport_layer_initialization( sci_phy, transport_layer_registers); /* Perofrm the initialization of the PE hardware */ scic_sds_phy_link_layer_initialization(sci_phy, link_layer_registers); /* * There is nothing that needs to be done in this state just * transition to the stopped state. */ sci_base_state_machine_change_state(&sci_phy->state_machine, SCI_BASE_PHY_STATE_STOPPED); return SCI_SUCCESS; } /** * This method assigns the direct attached device ID for this phy. * * @sci_phy The phy for which the direct attached device id is to * be assigned. * @device_id The direct attached device ID to assign to the phy. * This will either be the RNi for the device or an invalid RNi if there * is no current device assigned to the phy. */ void scic_sds_phy_setup_transport( struct scic_sds_phy *sci_phy, u32 device_id) { u32 tl_control; writel(device_id, &sci_phy->transport_layer_registers->stp_rni); /* * The read should guarantee that the first write gets posted * before the next write */ tl_control = readl(&sci_phy->transport_layer_registers->control); tl_control |= SCU_TLCR_GEN_BIT(CLEAR_TCI_NCQ_MAPPING_TABLE); writel(tl_control, &sci_phy->transport_layer_registers->control); } /** * * @sci_phy: The phy object to be suspended. * * This function will perform the register reads/writes to suspend the SCU * hardware protocol engine. none */ static void scic_sds_phy_suspend( struct scic_sds_phy *sci_phy) { u32 scu_sas_pcfg_value; scu_sas_pcfg_value = readl(&sci_phy->link_layer_registers->phy_configuration); scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE); writel(scu_sas_pcfg_value, &sci_phy->link_layer_registers->phy_configuration); scic_sds_phy_setup_transport( sci_phy, SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX); } void scic_sds_phy_resume(struct scic_sds_phy *sci_phy) { u32 scu_sas_pcfg_value; scu_sas_pcfg_value = readl(&sci_phy->link_layer_registers->phy_configuration); scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE); writel(scu_sas_pcfg_value, &sci_phy->link_layer_registers->phy_configuration); } void scic_sds_phy_get_sas_address(struct scic_sds_phy *sci_phy, struct sci_sas_address *sas_address) { sas_address->high = readl(&sci_phy->link_layer_registers->source_sas_address_high); sas_address->low = readl(&sci_phy->link_layer_registers->source_sas_address_low); } void scic_sds_phy_get_attached_sas_address(struct scic_sds_phy *sci_phy, struct sci_sas_address *sas_address) { struct sas_identify_frame *iaf; struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); iaf = &iphy->frame_rcvd.iaf; memcpy(sas_address, iaf->sas_addr, SAS_ADDR_SIZE); } void scic_sds_phy_get_protocols(struct scic_sds_phy *sci_phy, struct scic_phy_proto *protocols) { protocols->all = (u16)(readl(&sci_phy-> link_layer_registers->transmit_identification) & 0x0000FFFF); } enum sci_status scic_sds_phy_start(struct scic_sds_phy *sci_phy) { struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller; enum scic_sds_phy_states state = sci_phy->state_machine.current_state_id; struct isci_host *ihost = scic_to_ihost(scic); if (state != SCI_BASE_PHY_STATE_STOPPED) { dev_dbg(sciphy_to_dev(sci_phy), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; } /* Create the SIGNATURE FIS Timeout timer for this phy */ sci_phy->sata_timeout_timer = isci_timer_create(ihost, sci_phy, scic_sds_phy_sata_timeout); if (sci_phy->sata_timeout_timer) sci_base_state_machine_change_state(&sci_phy->state_machine, SCI_BASE_PHY_STATE_STARTING); return SCI_SUCCESS; } /** * This method will attempt to stop the phy object. * @sci_phy: * * enum sci_status SCI_SUCCESS if the phy is going to stop SCI_INVALID_STATE * if the phy is not in a valid state to stop */ enum sci_status scic_sds_phy_stop(struct scic_sds_phy *sci_phy) { return sci_phy->state_handlers->stop_handler(sci_phy); } /** * This method will attempt to reset the phy. This request is only valid when * the phy is in an ready state * @sci_phy: * * enum sci_status */ enum sci_status scic_sds_phy_reset( struct scic_sds_phy *sci_phy) { return sci_phy->state_handlers->reset_handler(sci_phy); } /** * This method will process the event code received. * @sci_phy: * @event_code: * * enum sci_status */ enum sci_status scic_sds_phy_event_handler( struct scic_sds_phy *sci_phy, u32 event_code) { return sci_phy->state_handlers->event_handler(sci_phy, event_code); } /** * This method will process the frame index received. * @sci_phy: * @frame_index: * * enum sci_status */ enum sci_status scic_sds_phy_frame_handler( struct scic_sds_phy *sci_phy, u32 frame_index) { return sci_phy->state_handlers->frame_handler(sci_phy, frame_index); } /** * This method will give the phy permission to consume power * @sci_phy: * * enum sci_status */ enum sci_status scic_sds_phy_consume_power_handler( struct scic_sds_phy *sci_phy) { return sci_phy->state_handlers->consume_power_handler(sci_phy); } /* * ***************************************************************************** * * SCIC SDS PHY HELPER FUNCTIONS * ***************************************************************************** */ /** * * @sci_phy: The phy object that received SAS PHY DETECTED. * * This method continues the link training for the phy as if it were a SAS PHY * instead of a SATA PHY. This is done because the completion queue had a SAS * PHY DETECTED event when the state machine was expecting a SATA PHY event. * none */ static void scic_sds_phy_start_sas_link_training( struct scic_sds_phy *sci_phy) { u32 phy_control; phy_control = readl(&sci_phy->link_layer_registers->phy_configuration); phy_control |= SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD); writel(phy_control, &sci_phy->link_layer_registers->phy_configuration); sci_base_state_machine_change_state( &sci_phy->state_machine, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN ); sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SAS; } /** * * @sci_phy: The phy object that received a SATA SPINUP HOLD event * * This method continues the link training for the phy as if it were a SATA PHY * instead of a SAS PHY. This is done because the completion queue had a SATA * SPINUP HOLD event when the state machine was expecting a SAS PHY event. none */ static void scic_sds_phy_start_sata_link_training( struct scic_sds_phy *sci_phy) { sci_base_state_machine_change_state( &sci_phy->state_machine, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER ); sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA; } /** * scic_sds_phy_complete_link_training - perform processing common to * all protocols upon completion of link training. * @sci_phy: This parameter specifies the phy object for which link training * has completed. * @max_link_rate: This parameter specifies the maximum link rate to be * associated with this phy. * @next_state: This parameter specifies the next state for the phy's starting * sub-state machine. * */ static void scic_sds_phy_complete_link_training( struct scic_sds_phy *sci_phy, enum sas_linkrate max_link_rate, u32 next_state) { sci_phy->max_negotiated_speed = max_link_rate; sci_base_state_machine_change_state(&sci_phy->state_machine, next_state); } static void scic_sds_phy_restart_starting_state( struct scic_sds_phy *sci_phy) { /* Re-enter the base state machine starting state */ sci_base_state_machine_change_state(&sci_phy->state_machine, SCI_BASE_PHY_STATE_STARTING); } /* **************************************************************************** * SCIC SDS PHY general handlers ************************************************************************** */ static enum sci_status scic_sds_phy_starting_substate_general_stop_handler( struct scic_sds_phy *phy) { sci_base_state_machine_change_state(&phy->state_machine, SCI_BASE_PHY_STATE_STOPPED); return SCI_SUCCESS; } /* * ***************************************************************************** * * SCIC SDS PHY EVENT_HANDLERS * ***************************************************************************** */ /** * * @phy: This struct scic_sds_phy object which has received an event. * @event_code: This is the event code which the phy object is to decode. * * This method is called when an event notification is received for the phy * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SPEED_EN. - * decode the event - sas phy detected causes a state transition to the wait * for speed event notification. - any other events log a warning message and * set a failure status enum sci_status SCI_SUCCESS on any valid event notification * SCI_FAILURE on any unexpected event notifation */ static enum sci_status scic_sds_phy_starting_substate_await_ossp_event_handler( struct scic_sds_phy *sci_phy, u32 event_code) { u32 result = SCI_SUCCESS; switch (scu_get_event_code(event_code)) { case SCU_EVENT_SAS_PHY_DETECTED: scic_sds_phy_start_sas_link_training(sci_phy); sci_phy->is_in_link_training = true; break; case SCU_EVENT_SATA_SPINUP_HOLD: scic_sds_phy_start_sata_link_training(sci_phy); sci_phy->is_in_link_training = true; break; default: dev_dbg(sciphy_to_dev(sci_phy), "%s: PHY starting substate machine received " "unexpected event_code %x\n", __func__, event_code); result = SCI_FAILURE; break; } return result; } /** * * @phy: This struct scic_sds_phy object which has received an event. * @event_code: This is the event code which the phy object is to decode. * * This method is called when an event notification is received for the phy * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SPEED_EN. - * decode the event - sas phy detected returns us back to this state. - speed * event detected causes a state transition to the wait for iaf. - identify * timeout is an un-expected event and the state machine is restarted. - link * failure events restart the starting state machine - any other events log a * warning message and set a failure status enum sci_status SCI_SUCCESS on any valid * event notification SCI_FAILURE on any unexpected event notifation */ static enum sci_status scic_sds_phy_starting_substate_await_sas_phy_speed_event_handler( struct scic_sds_phy *sci_phy, u32 event_code) { u32 result = SCI_SUCCESS; switch (scu_get_event_code(event_code)) { case SCU_EVENT_SAS_PHY_DETECTED: /* * Why is this being reported again by the controller? * We would re-enter this state so just stay here */ break; case SCU_EVENT_SAS_15: case SCU_EVENT_SAS_15_SSC: scic_sds_phy_complete_link_training( sci_phy, SAS_LINK_RATE_1_5_GBPS, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF); break; case SCU_EVENT_SAS_30: case SCU_EVENT_SAS_30_SSC: scic_sds_phy_complete_link_training( sci_phy, SAS_LINK_RATE_3_0_GBPS, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF); break; case SCU_EVENT_SAS_60: case SCU_EVENT_SAS_60_SSC: scic_sds_phy_complete_link_training( sci_phy, SAS_LINK_RATE_6_0_GBPS, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF); break; case SCU_EVENT_SATA_SPINUP_HOLD: /* * We were doing SAS PHY link training and received a SATA PHY event * continue OOB/SN as if this were a SATA PHY */ scic_sds_phy_start_sata_link_training(sci_phy); break; case SCU_EVENT_LINK_FAILURE: /* Link failure change state back to the starting state */ scic_sds_phy_restart_starting_state(sci_phy); break; default: dev_warn(sciphy_to_dev(sci_phy), "%s: PHY starting substate machine received " "unexpected event_code %x\n", __func__, event_code); result = SCI_FAILURE; break; } return result; } /** * * @phy: This struct scic_sds_phy object which has received an event. * @event_code: This is the event code which the phy object is to decode. * * This method is called when an event notification is received for the phy * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF. - * decode the event - sas phy detected event backs up the state machine to the * await speed notification. - identify timeout is an un-expected event and the * state machine is restarted. - link failure events restart the starting state * machine - any other events log a warning message and set a failure status * enum sci_status SCI_SUCCESS on any valid event notification SCI_FAILURE on any * unexpected event notifation */ static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_event_handler( struct scic_sds_phy *sci_phy, u32 event_code) { u32 result = SCI_SUCCESS; switch (scu_get_event_code(event_code)) { case SCU_EVENT_SAS_PHY_DETECTED: /* Backup the state machine */ scic_sds_phy_start_sas_link_training(sci_phy); break; case SCU_EVENT_SATA_SPINUP_HOLD: /* * We were doing SAS PHY link training and received a SATA PHY event * continue OOB/SN as if this were a SATA PHY */ scic_sds_phy_start_sata_link_training(sci_phy); break; case SCU_EVENT_RECEIVED_IDENTIFY_TIMEOUT: case SCU_EVENT_LINK_FAILURE: case SCU_EVENT_HARD_RESET_RECEIVED: /* Start the oob/sn state machine over again */ scic_sds_phy_restart_starting_state(sci_phy); break; default: dev_warn(sciphy_to_dev(sci_phy), "%s: PHY starting substate machine received " "unexpected event_code %x\n", __func__, event_code); result = SCI_FAILURE; break; } return result; } /** * * @phy: This struct scic_sds_phy object which has received an event. * @event_code: This is the event code which the phy object is to decode. * * This method is called when an event notification is received for the phy * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_POWER. - * decode the event - link failure events restart the starting state machine - * any other events log a warning message and set a failure status enum sci_status * SCI_SUCCESS on a link failure event SCI_FAILURE on any unexpected event * notifation */ static enum sci_status scic_sds_phy_starting_substate_await_sas_power_event_handler( struct scic_sds_phy *sci_phy, u32 event_code) { u32 result = SCI_SUCCESS; switch (scu_get_event_code(event_code)) { case SCU_EVENT_LINK_FAILURE: /* Link failure change state back to the starting state */ scic_sds_phy_restart_starting_state(sci_phy); break; default: dev_warn(sciphy_to_dev(sci_phy), "%s: PHY starting substate machine received unexpected " "event_code %x\n", __func__, event_code); result = SCI_FAILURE; break; } return result; } /** * * @phy: This struct scic_sds_phy object which has received an event. * @event_code: This is the event code which the phy object is to decode. * * This method is called when an event notification is received for the phy * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. - * decode the event - link failure events restart the starting state machine - * sata spinup hold events are ignored since they are expected - any other * events log a warning message and set a failure status enum sci_status SCI_SUCCESS * on a link failure event SCI_FAILURE on any unexpected event notifation */ static enum sci_status scic_sds_phy_starting_substate_await_sata_power_event_handler( struct scic_sds_phy *sci_phy, u32 event_code) { u32 result = SCI_SUCCESS; switch (scu_get_event_code(event_code)) { case SCU_EVENT_LINK_FAILURE: /* Link failure change state back to the starting state */ scic_sds_phy_restart_starting_state(sci_phy); break; case SCU_EVENT_SATA_SPINUP_HOLD: /* These events are received every 10ms and are expected while in this state */ break; case SCU_EVENT_SAS_PHY_DETECTED: /* * There has been a change in the phy type before OOB/SN for the * SATA finished start down the SAS link traning path. */ scic_sds_phy_start_sas_link_training(sci_phy); break; default: dev_warn(sciphy_to_dev(sci_phy), "%s: PHY starting substate machine received " "unexpected event_code %x\n", __func__, event_code); result = SCI_FAILURE; break; } return result; } /** * scic_sds_phy_starting_substate_await_sata_phy_event_handler - * @phy: This struct scic_sds_phy object which has received an event. * @event_code: This is the event code which the phy object is to decode. * * This method is called when an event notification is received for the phy * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. - * decode the event - link failure events restart the starting state machine - * sata spinup hold events are ignored since they are expected - sata phy * detected event change to the wait speed event - any other events log a * warning message and set a failure status enum sci_status SCI_SUCCESS on a link * failure event SCI_FAILURE on any unexpected event notifation */ static enum sci_status scic_sds_phy_starting_substate_await_sata_phy_event_handler( struct scic_sds_phy *sci_phy, u32 event_code) { u32 result = SCI_SUCCESS; switch (scu_get_event_code(event_code)) { case SCU_EVENT_LINK_FAILURE: /* Link failure change state back to the starting state */ scic_sds_phy_restart_starting_state(sci_phy); break; case SCU_EVENT_SATA_SPINUP_HOLD: /* These events might be received since we dont know how many may be in * the completion queue while waiting for power */ break; case SCU_EVENT_SATA_PHY_DETECTED: sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA; /* We have received the SATA PHY notification change state */ sci_base_state_machine_change_state(&sci_phy->state_machine, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN); break; case SCU_EVENT_SAS_PHY_DETECTED: /* There has been a change in the phy type before OOB/SN for the * SATA finished start down the SAS link traning path. */ scic_sds_phy_start_sas_link_training(sci_phy); break; default: dev_warn(sciphy_to_dev(sci_phy), "%s: PHY starting substate machine received " "unexpected event_code %x\n", __func__, event_code); result = SCI_FAILURE; break; } return result; } /** * * @phy: This struct scic_sds_phy object which has received an event. * @event_code: This is the event code which the phy object is to decode. * * This method is called when an event notification is received for the phy * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. * - decode the event - sata phy detected returns us back to this state. - * speed event detected causes a state transition to the wait for signature. - * link failure events restart the starting state machine - any other events * log a warning message and set a failure status enum sci_status SCI_SUCCESS on any * valid event notification SCI_FAILURE on any unexpected event notifation */ static enum sci_status scic_sds_phy_starting_substate_await_sata_speed_event_handler( struct scic_sds_phy *sci_phy, u32 event_code) { u32 result = SCI_SUCCESS; switch (scu_get_event_code(event_code)) { case SCU_EVENT_SATA_PHY_DETECTED: /* * The hardware reports multiple SATA PHY detected events * ignore the extras */ break; case SCU_EVENT_SATA_15: case SCU_EVENT_SATA_15_SSC: scic_sds_phy_complete_link_training( sci_phy, SAS_LINK_RATE_1_5_GBPS, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF); break; case SCU_EVENT_SATA_30: case SCU_EVENT_SATA_30_SSC: scic_sds_phy_complete_link_training( sci_phy, SAS_LINK_RATE_3_0_GBPS, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF); break; case SCU_EVENT_SATA_60: case SCU_EVENT_SATA_60_SSC: scic_sds_phy_complete_link_training( sci_phy, SAS_LINK_RATE_6_0_GBPS, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF); break; case SCU_EVENT_LINK_FAILURE: /* Link failure change state back to the starting state */ scic_sds_phy_restart_starting_state(sci_phy); break; case SCU_EVENT_SAS_PHY_DETECTED: /* * There has been a change in the phy type before OOB/SN for the * SATA finished start down the SAS link traning path. */ scic_sds_phy_start_sas_link_training(sci_phy); break; default: dev_warn(sciphy_to_dev(sci_phy), "%s: PHY starting substate machine received " "unexpected event_code %x\n", __func__, event_code); result = SCI_FAILURE; break; } return result; } /** * scic_sds_phy_starting_substate_await_sig_fis_event_handler - * @phy: This struct scic_sds_phy object which has received an event. * @event_code: This is the event code which the phy object is to decode. * * This method is called when an event notification is received for the phy * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - * decode the event - sas phy detected event backs up the state machine to the * await speed notification. - identify timeout is an un-expected event and the * state machine is restarted. - link failure events restart the starting state * machine - any other events log a warning message and set a failure status * enum sci_status SCI_SUCCESS on any valid event notification SCI_FAILURE on any * unexpected event notifation */ static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_event_handler( struct scic_sds_phy *sci_phy, u32 event_code) { u32 result = SCI_SUCCESS; switch (scu_get_event_code(event_code)) { case SCU_EVENT_SATA_PHY_DETECTED: /* Backup the state machine */ sci_base_state_machine_change_state(&sci_phy->state_machine, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN); break; case SCU_EVENT_LINK_FAILURE: /* Link failure change state back to the starting state */ scic_sds_phy_restart_starting_state(sci_phy); break; default: dev_warn(sciphy_to_dev(sci_phy), "%s: PHY starting substate machine received " "unexpected event_code %x\n", __func__, event_code); result = SCI_FAILURE; break; } return result; } /* * ***************************************************************************** * * SCIC SDS PHY FRAME_HANDLERS * ***************************************************************************** */ /** * * @phy: This is struct scic_sds_phy object which is being requested to decode the * frame data. * @frame_index: This is the index of the unsolicited frame which was received * for this phy. * * This method decodes the unsolicited frame when the struct scic_sds_phy is in the * SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF. - Get the UF Header - If the UF * is an IAF - Copy IAF data to local phy object IAF data buffer. - Change * starting substate to wait power. - else - log warning message of unexpected * unsolicted frame - release frame buffer enum sci_status SCI_SUCCESS */ static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_frame_handler( struct scic_sds_phy *sci_phy, u32 frame_index) { enum sci_status result; u32 *frame_words; struct sas_identify_frame iaf; struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); result = scic_sds_unsolicited_frame_control_get_header( &(scic_sds_phy_get_controller(sci_phy)->uf_control), frame_index, (void **)&frame_words); if (result != SCI_SUCCESS) return result; sci_swab32_cpy(&iaf, frame_words, sizeof(iaf) / sizeof(u32)); if (iaf.frame_type == 0) { u32 state; memcpy(&iphy->frame_rcvd.iaf, &iaf, sizeof(iaf)); if (iaf.smp_tport) { /* We got the IAF for an expander PHY go to the final * state since there are no power requirements for * expander phys. */ state = SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL; } else { /* We got the IAF we can now go to the await spinup * semaphore state */ state = SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER; } sci_base_state_machine_change_state( &sci_phy->state_machine, state); result = SCI_SUCCESS; } else dev_warn(sciphy_to_dev(sci_phy), "%s: PHY starting substate machine received " "unexpected frame id %x\n", __func__, frame_index); scic_sds_controller_release_frame(scic_sds_phy_get_controller(sci_phy), frame_index); return result; } /** * * @phy: This is struct scic_sds_phy object which is being requested to decode the * frame data. * @frame_index: This is the index of the unsolicited frame which was received * for this phy. * * This method decodes the unsolicited frame when the struct scic_sds_phy is in the * SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Get the UF Header - If * the UF is an SIGNATURE FIS - Copy IAF data to local phy object SIGNATURE FIS * data buffer. - else - log warning message of unexpected unsolicted frame - * release frame buffer enum sci_status SCI_SUCCESS Must decode the SIGNATURE FIS * data */ static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_frame_handler( struct scic_sds_phy *sci_phy, u32 frame_index) { enum sci_status result; struct dev_to_host_fis *frame_header; u32 *fis_frame_data; struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); result = scic_sds_unsolicited_frame_control_get_header( &(scic_sds_phy_get_controller(sci_phy)->uf_control), frame_index, (void **)&frame_header); if (result != SCI_SUCCESS) return result; if ((frame_header->fis_type == FIS_REGD2H) && !(frame_header->status & ATA_BUSY)) { scic_sds_unsolicited_frame_control_get_buffer( &(scic_sds_phy_get_controller(sci_phy)->uf_control), frame_index, (void **)&fis_frame_data); scic_sds_controller_copy_sata_response(&iphy->frame_rcvd.fis, frame_header, fis_frame_data); /* got IAF we can now go to the await spinup semaphore state */ sci_base_state_machine_change_state(&sci_phy->state_machine, SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL); result = SCI_SUCCESS; } else dev_warn(sciphy_to_dev(sci_phy), "%s: PHY starting substate machine received " "unexpected frame id %x\n", __func__, frame_index); /* Regardless of the result we are done with this frame with it */ scic_sds_controller_release_frame(scic_sds_phy_get_controller(sci_phy), frame_index); return result; } /* * ***************************************************************************** * * SCIC SDS PHY POWER_HANDLERS * ***************************************************************************** */ /* * This method is called by the struct scic_sds_controller when the phy object is * granted power. - The notify enable spinups are turned on for this phy object * - The phy state machine is transitioned to the * SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL. enum sci_status SCI_SUCCESS */ static enum sci_status scic_sds_phy_starting_substate_await_sas_power_consume_power_handler( struct scic_sds_phy *sci_phy) { u32 enable_spinup; enable_spinup = readl(&sci_phy->link_layer_registers->notify_enable_spinup_control); enable_spinup |= SCU_ENSPINUP_GEN_BIT(ENABLE); writel(enable_spinup, &sci_phy->link_layer_registers->notify_enable_spinup_control); /* Change state to the final state this substate machine has run to completion */ sci_base_state_machine_change_state(&sci_phy->state_machine, SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL); return SCI_SUCCESS; } /* * This method is called by the struct scic_sds_controller when the phy object is * granted power. - The phy state machine is transitioned to the * SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. enum sci_status SCI_SUCCESS */ static enum sci_status scic_sds_phy_starting_substate_await_sata_power_consume_power_handler( struct scic_sds_phy *sci_phy) { u32 scu_sas_pcfg_value; /* Release the spinup hold state and reset the OOB state machine */ scu_sas_pcfg_value = readl(&sci_phy->link_layer_registers->phy_configuration); scu_sas_pcfg_value &= ~(SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD) | SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE)); scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET); writel(scu_sas_pcfg_value, &sci_phy->link_layer_registers->phy_configuration); /* Now restart the OOB operation */ scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET); scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); writel(scu_sas_pcfg_value, &sci_phy->link_layer_registers->phy_configuration); /* Change state to the final state this substate machine has run to completion */ sci_base_state_machine_change_state(&sci_phy->state_machine, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN); return SCI_SUCCESS; } static enum sci_status default_phy_handler(struct scic_sds_phy *sci_phy, const char *func) { dev_dbg(sciphy_to_dev(sci_phy), "%s: in wrong state: %d\n", func, sci_base_state_machine_get_state(&sci_phy->state_machine)); return SCI_FAILURE_INVALID_STATE; } static enum sci_status scic_sds_phy_default_stop_handler(struct scic_sds_phy *sci_phy) { return default_phy_handler(sci_phy, __func__); } static enum sci_status scic_sds_phy_default_reset_handler(struct scic_sds_phy *sci_phy) { return default_phy_handler(sci_phy, __func__); } static enum sci_status scic_sds_phy_default_destroy_handler(struct scic_sds_phy *sci_phy) { return default_phy_handler(sci_phy, __func__); } static enum sci_status scic_sds_phy_default_frame_handler(struct scic_sds_phy *sci_phy, u32 frame_index) { struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy); default_phy_handler(sci_phy, __func__); scic_sds_controller_release_frame(scic, frame_index); return SCI_FAILURE_INVALID_STATE; } static enum sci_status scic_sds_phy_default_event_handler(struct scic_sds_phy *sci_phy, u32 event_code) { return default_phy_handler(sci_phy, __func__); } static enum sci_status scic_sds_phy_default_consume_power_handler(struct scic_sds_phy *sci_phy) { return default_phy_handler(sci_phy, __func__); } static enum sci_status scic_sds_phy_stopped_state_destroy_handler(struct scic_sds_phy *sci_phy) { return SCI_SUCCESS; } static enum sci_status scic_sds_phy_ready_state_stop_handler(struct scic_sds_phy *sci_phy) { sci_base_state_machine_change_state(&sci_phy->state_machine, SCI_BASE_PHY_STATE_STOPPED); return SCI_SUCCESS; } static enum sci_status scic_sds_phy_ready_state_reset_handler(struct scic_sds_phy *sci_phy) { sci_base_state_machine_change_state(&sci_phy->state_machine, SCI_BASE_PHY_STATE_RESETTING); return SCI_SUCCESS; } /** * scic_sds_phy_ready_state_event_handler - * @phy: This is the struct scic_sds_phy object which has received the event. * * This method request the struct scic_sds_phy handle the received event. The only * event that we are interested in while in the ready state is the link failure * event. - decoded event is a link failure - transition the struct scic_sds_phy back * to the SCI_BASE_PHY_STATE_STARTING state. - any other event received will * report a warning message enum sci_status SCI_SUCCESS if the event received is a * link failure SCI_FAILURE_INVALID_STATE for any other event received. */ static enum sci_status scic_sds_phy_ready_state_event_handler(struct scic_sds_phy *sci_phy, u32 event_code) { enum sci_status result = SCI_FAILURE; switch (scu_get_event_code(event_code)) { case SCU_EVENT_LINK_FAILURE: /* Link failure change state back to the starting state */ sci_base_state_machine_change_state(&sci_phy->state_machine, SCI_BASE_PHY_STATE_STARTING); result = SCI_SUCCESS; break; case SCU_EVENT_BROADCAST_CHANGE: /* Broadcast change received. Notify the port. */ if (scic_sds_phy_get_port(sci_phy) != NULL) scic_sds_port_broadcast_change_received(sci_phy->owning_port, sci_phy); else sci_phy->bcn_received_while_port_unassigned = true; break; default: dev_warn(sciphy_to_dev(sci_phy), "%sP SCIC PHY 0x%p ready state machine received " "unexpected event_code %x\n", __func__, sci_phy, event_code); result = SCI_FAILURE_INVALID_STATE; break; } return result; } static enum sci_status scic_sds_phy_resetting_state_event_handler(struct scic_sds_phy *sci_phy, u32 event_code) { enum sci_status result = SCI_FAILURE; switch (scu_get_event_code(event_code)) { case SCU_EVENT_HARD_RESET_TRANSMITTED: /* Link failure change state back to the starting state */ sci_base_state_machine_change_state(&sci_phy->state_machine, SCI_BASE_PHY_STATE_STARTING); result = SCI_SUCCESS; break; default: dev_warn(sciphy_to_dev(sci_phy), "%s: SCIC PHY 0x%p resetting state machine received " "unexpected event_code %x\n", __func__, sci_phy, event_code); result = SCI_FAILURE_INVALID_STATE; break; } return result; } /* --------------------------------------------------------------------------- */ static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[] = { [SCI_BASE_PHY_STATE_INITIAL] = { .stop_handler = scic_sds_phy_default_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_default_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_STOPPED] = { .stop_handler = scic_sds_phy_default_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_stopped_state_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_default_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_STARTING] = { .stop_handler = scic_sds_phy_default_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_default_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = { .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_default_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = { .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_starting_substate_await_ossp_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = { .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_starting_substate_await_sas_phy_speed_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = { .stop_handler = scic_sds_phy_default_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_starting_substate_await_iaf_uf_frame_handler, .event_handler = scic_sds_phy_starting_substate_await_iaf_uf_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER] = { .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_starting_substate_await_sas_power_event_handler, .consume_power_handler = scic_sds_phy_starting_substate_await_sas_power_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER] = { .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_starting_substate_await_sata_power_event_handler, .consume_power_handler = scic_sds_phy_starting_substate_await_sata_power_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN] = { .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_starting_substate_await_sata_phy_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN] = { .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_starting_substate_await_sata_speed_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF] = { .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_starting_substate_await_sig_fis_frame_handler, .event_handler = scic_sds_phy_starting_substate_await_sig_fis_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL] = { .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_default_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_READY] = { .stop_handler = scic_sds_phy_ready_state_stop_handler, .reset_handler = scic_sds_phy_ready_state_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_ready_state_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_RESETTING] = { .stop_handler = scic_sds_phy_default_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_resetting_state_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_FINAL] = { .stop_handler = scic_sds_phy_default_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_default_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler } }; /* * **************************************************************************** * * PHY STARTING SUBSTATE METHODS * **************************************************************************** */ /** * scic_sds_phy_starting_initial_substate_enter - * @object: This is the object which is cast to a struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy on * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL. - The initial state * handlers are put in place for the struct scic_sds_phy object. - The state is * changed to the wait phy type event notification. none */ static void scic_sds_phy_starting_initial_substate_enter(void *object) { struct scic_sds_phy *sci_phy = object; scic_sds_phy_set_base_state_handlers( sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL); /* This is just an temporary state go off to the starting state */ sci_base_state_machine_change_state(&sci_phy->state_machine, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN); } /** * * @object: This is the object which is cast to a struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy on * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_PHY_TYPE_EN. - Set the * struct scic_sds_phy object state handlers for this state. none */ static void scic_sds_phy_starting_await_ossp_en_substate_enter(void *object) { struct scic_sds_phy *sci_phy = object; scic_sds_phy_set_base_state_handlers( sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN ); } /** * * @object: This is the object which is cast to a struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy on * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SPEED_EN. - Set the * struct scic_sds_phy object state handlers for this state. none */ static void scic_sds_phy_starting_await_sas_speed_en_substate_enter( void *object) { struct scic_sds_phy *sci_phy = object; scic_sds_phy_set_base_state_handlers( sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN ); } /** * * @object: This is the object which is cast to a struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy on * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF. - Set the * struct scic_sds_phy object state handlers for this state. none */ static void scic_sds_phy_starting_await_iaf_uf_substate_enter(void *object) { struct scic_sds_phy *sci_phy = object; scic_sds_phy_set_base_state_handlers( sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF ); } /** * * @object: This is the object which is cast to a struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy on * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER. - Set the * struct scic_sds_phy object state handlers for this state. - Add this phy object to * the power control queue none */ static void scic_sds_phy_starting_await_sas_power_substate_enter(void *object) { struct scic_sds_phy *sci_phy = object; scic_sds_phy_set_base_state_handlers( sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER ); scic_sds_controller_power_control_queue_insert( scic_sds_phy_get_controller(sci_phy), sci_phy ); } /** * * @object: This is the object which is cast to a struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy on exiting * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER. - Remove the * struct scic_sds_phy object from the power control queue. none */ static void scic_sds_phy_starting_await_sas_power_substate_exit(void *object) { struct scic_sds_phy *sci_phy = object; scic_sds_controller_power_control_queue_remove( scic_sds_phy_get_controller(sci_phy), sci_phy ); } /** * * @object: This is the object which is cast to a struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy on * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. - Set the * struct scic_sds_phy object state handlers for this state. - Add this phy object to * the power control queue none */ static void scic_sds_phy_starting_await_sata_power_substate_enter(void *object) { struct scic_sds_phy *sci_phy = object; scic_sds_phy_set_base_state_handlers( sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER ); scic_sds_controller_power_control_queue_insert( scic_sds_phy_get_controller(sci_phy), sci_phy ); } /** * * @object: This is the object which is cast to a struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy on exiting * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. - Remove the * struct scic_sds_phy object from the power control queue. none */ static void scic_sds_phy_starting_await_sata_power_substate_exit(void *object) { struct scic_sds_phy *sci_phy = object; scic_sds_controller_power_control_queue_remove( scic_sds_phy_get_controller(sci_phy), sci_phy ); } /** * * @object: This is the object which is cast to a struct scic_sds_phy object. * * This function will perform the actions required by the struct scic_sds_phy on * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. - Set the * struct scic_sds_phy object state handlers for this state. none */ static void scic_sds_phy_starting_await_sata_phy_substate_enter(void *object) { struct scic_sds_phy *sci_phy = object; scic_sds_phy_set_base_state_handlers( sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN); isci_timer_start(sci_phy->sata_timeout_timer, SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT); } /** * * @object: This is the object which is cast to a struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy * on exiting * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - stop the timer * that was started on entry to await sata phy event notification none */ static inline void scic_sds_phy_starting_await_sata_phy_substate_exit( void *object) { struct scic_sds_phy *sci_phy = object; isci_timer_stop(sci_phy->sata_timeout_timer); } /** * * @object: This is the object which is cast to a struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy on * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - Set the * struct scic_sds_phy object state handlers for this state. none */ static void scic_sds_phy_starting_await_sata_speed_substate_enter(void *object) { struct scic_sds_phy *sci_phy = object; scic_sds_phy_set_base_state_handlers( sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN); isci_timer_start(sci_phy->sata_timeout_timer, SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT); } /** * * @object: This is the object which is cast to a struct scic_sds_phy object. * * This function will perform the actions required by the * struct scic_sds_phy on exiting * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - stop the timer * that was started on entry to await sata phy event notification none */ static inline void scic_sds_phy_starting_await_sata_speed_substate_exit( void *object) { struct scic_sds_phy *sci_phy = object; isci_timer_stop(sci_phy->sata_timeout_timer); } /** * * @object: This is the object which is cast to a struct scic_sds_phy object. * * This function will perform the actions required by the struct scic_sds_phy on * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Set the * struct scic_sds_phy object state handlers for this state. * - Start the SIGNATURE FIS * timeout timer none */ static void scic_sds_phy_starting_await_sig_fis_uf_substate_enter(void *object) { bool continue_to_ready_state; struct scic_sds_phy *sci_phy = object; scic_sds_phy_set_base_state_handlers( sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF); continue_to_ready_state = scic_sds_port_link_detected( sci_phy->owning_port, sci_phy); if (continue_to_ready_state) { /* * Clear the PE suspend condition so we can actually * receive SIG FIS * The hardware will not respond to the XRDY until the PE * suspend condition is cleared. */ scic_sds_phy_resume(sci_phy); isci_timer_start(sci_phy->sata_timeout_timer, SCIC_SDS_SIGNATURE_FIS_TIMEOUT); } else sci_phy->is_in_link_training = false; } /** * * @object: This is the object which is cast to a struct scic_sds_phy object. * * This function will perform the actions required by the * struct scic_sds_phy on exiting * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Stop the SIGNATURE * FIS timeout timer. none */ static inline void scic_sds_phy_starting_await_sig_fis_uf_substate_exit( void *object) { struct scic_sds_phy *sci_phy = object; isci_timer_stop(sci_phy->sata_timeout_timer); } /** * * @object: This is the object which is cast to a struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy on * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL. - Set the struct scic_sds_phy * object state handlers for this state. - Change base state machine to the * ready state. none */ static void scic_sds_phy_starting_final_substate_enter(void *object) { struct scic_sds_phy *sci_phy = object; scic_sds_phy_set_base_state_handlers(sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL); /* State machine has run to completion so exit out and change * the base state machine to the ready state */ sci_base_state_machine_change_state(&sci_phy->state_machine, SCI_BASE_PHY_STATE_READY); } /* * **************************************************************************** * * PHY STATE PRIVATE METHODS * **************************************************************************** */ /** * * @sci_phy: This is the struct scic_sds_phy object to stop. * * This method will stop the struct scic_sds_phy object. This does not reset the * protocol engine it just suspends it and places it in a state where it will * not cause the end device to power up. none */ static void scu_link_layer_stop_protocol_engine( struct scic_sds_phy *sci_phy) { u32 scu_sas_pcfg_value; u32 enable_spinup_value; /* Suspend the protocol engine and place it in a sata spinup hold state */ scu_sas_pcfg_value = readl(&sci_phy->link_layer_registers->phy_configuration); scu_sas_pcfg_value |= (SCU_SAS_PCFG_GEN_BIT(OOB_RESET) | SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE) | SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD)); writel(scu_sas_pcfg_value, &sci_phy->link_layer_registers->phy_configuration); /* Disable the notify enable spinup primitives */ enable_spinup_value = readl(&sci_phy->link_layer_registers->notify_enable_spinup_control); enable_spinup_value &= ~SCU_ENSPINUP_GEN_BIT(ENABLE); writel(enable_spinup_value, &sci_phy->link_layer_registers->notify_enable_spinup_control); } /** * * * This method will start the OOB/SN state machine for this struct scic_sds_phy object. */ static void scu_link_layer_start_oob( struct scic_sds_phy *sci_phy) { u32 scu_sas_pcfg_value; scu_sas_pcfg_value = readl(&sci_phy->link_layer_registers->phy_configuration); scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); scu_sas_pcfg_value &= ~(SCU_SAS_PCFG_GEN_BIT(OOB_RESET) | SCU_SAS_PCFG_GEN_BIT(HARD_RESET)); writel(scu_sas_pcfg_value, &sci_phy->link_layer_registers->phy_configuration); } /** * * * This method will transmit a hard reset request on the specified phy. The SCU * hardware requires that we reset the OOB state machine and set the hard reset * bit in the phy configuration register. We then must start OOB over with the * hard reset bit set. */ static void scu_link_layer_tx_hard_reset( struct scic_sds_phy *sci_phy) { u32 phy_configuration_value; /* * SAS Phys must wait for the HARD_RESET_TX event notification to transition * to the starting state. */ phy_configuration_value = readl(&sci_phy->link_layer_registers->phy_configuration); phy_configuration_value |= (SCU_SAS_PCFG_GEN_BIT(HARD_RESET) | SCU_SAS_PCFG_GEN_BIT(OOB_RESET)); writel(phy_configuration_value, &sci_phy->link_layer_registers->phy_configuration); /* Now take the OOB state machine out of reset */ phy_configuration_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); phy_configuration_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET); writel(phy_configuration_value, &sci_phy->link_layer_registers->phy_configuration); } /* * **************************************************************************** * * PHY BASE STATE METHODS * **************************************************************************** */ /** * * @object: This is the object which is cast to a struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy on * entering the SCI_BASE_PHY_STATE_INITIAL. - This function sets the state * handlers for the phy object base state machine initial state. none */ static void scic_sds_phy_initial_state_enter(void *object) { struct scic_sds_phy *sci_phy = object; scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_INITIAL); } /** * * @object: This is the object which is cast to a struct scic_sds_phy object. * * This function will perform the actions required by the struct scic_sds_phy on * entering the SCI_BASE_PHY_STATE_INITIAL. - This function sets the state * handlers for the phy object base state machine initial state. - The SCU * hardware is requested to stop the protocol engine. none */ static void scic_sds_phy_stopped_state_enter(void *object) { struct scic_sds_phy *sci_phy = object; struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy); struct isci_host *ihost = scic_to_ihost(scic); /* * @todo We need to get to the controller to place this PE in a * reset state */ scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_STOPPED); if (sci_phy->sata_timeout_timer != NULL) { isci_del_timer(ihost, sci_phy->sata_timeout_timer); sci_phy->sata_timeout_timer = NULL; } scu_link_layer_stop_protocol_engine(sci_phy); if (sci_phy->state_machine.previous_state_id != SCI_BASE_PHY_STATE_INITIAL) scic_sds_controller_link_down( scic_sds_phy_get_controller(sci_phy), scic_sds_phy_get_port(sci_phy), sci_phy); } /** * * @object: This is the object which is cast to a struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy on * entering the SCI_BASE_PHY_STATE_STARTING. - This function sets the state * handlers for the phy object base state machine starting state. - The SCU * hardware is requested to start OOB/SN on this protocl engine. - The phy * starting substate machine is started. - If the previous state was the ready * state then the struct scic_sds_controller is informed that the phy has gone link * down. none */ static void scic_sds_phy_starting_state_enter(void *object) { struct scic_sds_phy *sci_phy = object; scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_STARTING); scu_link_layer_stop_protocol_engine(sci_phy); scu_link_layer_start_oob(sci_phy); /* We don't know what kind of phy we are going to be just yet */ sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN; sci_phy->bcn_received_while_port_unassigned = false; if (sci_phy->state_machine.previous_state_id == SCI_BASE_PHY_STATE_READY) { scic_sds_controller_link_down( scic_sds_phy_get_controller(sci_phy), scic_sds_phy_get_port(sci_phy), sci_phy ); } sci_base_state_machine_change_state(&sci_phy->state_machine, SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL); } /** * * @object: This is the object which is cast to a struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy on * entering the SCI_BASE_PHY_STATE_READY. - This function sets the state * handlers for the phy object base state machine ready state. - The SCU * hardware protocol engine is resumed. - The struct scic_sds_controller is informed * that the phy object has gone link up. none */ static void scic_sds_phy_ready_state_enter(void *object) { struct scic_sds_phy *sci_phy = object; scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_READY); scic_sds_controller_link_up( scic_sds_phy_get_controller(sci_phy), scic_sds_phy_get_port(sci_phy), sci_phy ); } /** * * @object: This is the object which is cast to a struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy on exiting * the SCI_BASE_PHY_STATE_INITIAL. This function suspends the SCU hardware * protocol engine represented by this struct scic_sds_phy object. none */ static void scic_sds_phy_ready_state_exit(void *object) { struct scic_sds_phy *sci_phy = object; scic_sds_phy_suspend(sci_phy); } /** * * @object: This is the object which is cast to a struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy on * entering the SCI_BASE_PHY_STATE_RESETTING. - This function sets the state * handlers for the phy object base state machine resetting state. none */ static void scic_sds_phy_resetting_state_enter(void *object) { struct scic_sds_phy *sci_phy = object; scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_RESETTING); /* * The phy is being reset, therefore deactivate it from the port. * In the resetting state we don't notify the user regarding * link up and link down notifications. */ scic_sds_port_deactivate_phy(sci_phy->owning_port, sci_phy, false); if (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) { scu_link_layer_tx_hard_reset(sci_phy); } else { /* * The SCU does not need to have a discrete reset state so * just go back to the starting state. */ sci_base_state_machine_change_state( &sci_phy->state_machine, SCI_BASE_PHY_STATE_STARTING); } } /** * * @object: This is the object which is cast to a struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy on * entering the SCI_BASE_PHY_STATE_FINAL. - This function sets the state * handlers for the phy object base state machine final state. none */ static void scic_sds_phy_final_state_enter(void *object) { struct scic_sds_phy *sci_phy = object; scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_FINAL); /* Nothing to do here */ } /* --------------------------------------------------------------------------- */ static const struct sci_base_state scic_sds_phy_state_table[] = { [SCI_BASE_PHY_STATE_INITIAL] = { .enter_state = scic_sds_phy_initial_state_enter, }, [SCI_BASE_PHY_STATE_STOPPED] = { .enter_state = scic_sds_phy_stopped_state_enter, }, [SCI_BASE_PHY_STATE_STARTING] = { .enter_state = scic_sds_phy_starting_state_enter, }, [SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = { .enter_state = scic_sds_phy_starting_initial_substate_enter, }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = { .enter_state = scic_sds_phy_starting_await_ossp_en_substate_enter, }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = { .enter_state = scic_sds_phy_starting_await_sas_speed_en_substate_enter, }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = { .enter_state = scic_sds_phy_starting_await_iaf_uf_substate_enter, }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER] = { .enter_state = scic_sds_phy_starting_await_sas_power_substate_enter, .exit_state = scic_sds_phy_starting_await_sas_power_substate_exit, }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER] = { .enter_state = scic_sds_phy_starting_await_sata_power_substate_enter, .exit_state = scic_sds_phy_starting_await_sata_power_substate_exit }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN] = { .enter_state = scic_sds_phy_starting_await_sata_phy_substate_enter, .exit_state = scic_sds_phy_starting_await_sata_phy_substate_exit }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN] = { .enter_state = scic_sds_phy_starting_await_sata_speed_substate_enter, .exit_state = scic_sds_phy_starting_await_sata_speed_substate_exit }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF] = { .enter_state = scic_sds_phy_starting_await_sig_fis_uf_substate_enter, .exit_state = scic_sds_phy_starting_await_sig_fis_uf_substate_exit }, [SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL] = { .enter_state = scic_sds_phy_starting_final_substate_enter, }, [SCI_BASE_PHY_STATE_READY] = { .enter_state = scic_sds_phy_ready_state_enter, .exit_state = scic_sds_phy_ready_state_exit, }, [SCI_BASE_PHY_STATE_RESETTING] = { .enter_state = scic_sds_phy_resetting_state_enter, }, [SCI_BASE_PHY_STATE_FINAL] = { .enter_state = scic_sds_phy_final_state_enter, }, }; void scic_sds_phy_construct(struct scic_sds_phy *sci_phy, struct scic_sds_port *owning_port, u8 phy_index) { sci_base_state_machine_construct(&sci_phy->state_machine, sci_phy, scic_sds_phy_state_table, SCI_BASE_PHY_STATE_INITIAL); sci_base_state_machine_start(&sci_phy->state_machine); /* Copy the rest of the input data to our locals */ sci_phy->owning_port = owning_port; sci_phy->phy_index = phy_index; sci_phy->bcn_received_while_port_unassigned = false; sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN; sci_phy->link_layer_registers = NULL; sci_phy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN; sci_phy->sata_timeout_timer = NULL; } void isci_phy_init(struct isci_phy *iphy, struct isci_host *ihost, int index) { union scic_oem_parameters oem; u64 sci_sas_addr; __be64 sas_addr; scic_oem_parameters_get(&ihost->sci, &oem); sci_sas_addr = oem.sds1.phys[index].sas_address.high; sci_sas_addr <<= 32; sci_sas_addr |= oem.sds1.phys[index].sas_address.low; sas_addr = cpu_to_be64(sci_sas_addr); memcpy(iphy->sas_addr, &sas_addr, sizeof(sas_addr)); iphy->isci_port = NULL; iphy->sas_phy.enabled = 0; iphy->sas_phy.id = index; iphy->sas_phy.sas_addr = &iphy->sas_addr[0]; iphy->sas_phy.frame_rcvd = (u8 *)&iphy->frame_rcvd; iphy->sas_phy.ha = &ihost->sas_ha; iphy->sas_phy.lldd_phy = iphy; iphy->sas_phy.enabled = 1; iphy->sas_phy.class = SAS; iphy->sas_phy.iproto = SAS_PROTOCOL_ALL; iphy->sas_phy.tproto = 0; iphy->sas_phy.type = PHY_TYPE_PHYSICAL; iphy->sas_phy.role = PHY_ROLE_INITIATOR; iphy->sas_phy.oob_mode = OOB_NOT_CONNECTED; iphy->sas_phy.linkrate = SAS_LINK_RATE_UNKNOWN; memset(&iphy->frame_rcvd, 0, sizeof(iphy->frame_rcvd)); } /** * isci_phy_control() - This function is one of the SAS Domain Template * functions. This is a phy management function. * @phy: This parameter specifies the sphy being controlled. * @func: This parameter specifies the phy control function being invoked. * @buf: This parameter is specific to the phy function being invoked. * * status, zero indicates success. */ int isci_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func, void *buf) { int ret = 0; struct isci_phy *iphy = sas_phy->lldd_phy; struct isci_port *iport = iphy->isci_port; struct isci_host *ihost = sas_phy->ha->lldd_ha; unsigned long flags; dev_dbg(&ihost->pdev->dev, "%s: phy %p; func %d; buf %p; isci phy %p, port %p\n", __func__, sas_phy, func, buf, iphy, iport); switch (func) { case PHY_FUNC_DISABLE: spin_lock_irqsave(&ihost->scic_lock, flags); scic_sds_phy_stop(&iphy->sci); spin_unlock_irqrestore(&ihost->scic_lock, flags); break; case PHY_FUNC_LINK_RESET: spin_lock_irqsave(&ihost->scic_lock, flags); scic_sds_phy_stop(&iphy->sci); scic_sds_phy_start(&iphy->sci); spin_unlock_irqrestore(&ihost->scic_lock, flags); break; case PHY_FUNC_HARD_RESET: if (!iport) return -ENODEV; /* Perform the port reset. */ ret = isci_port_perform_hard_reset(ihost, iport, iphy); break; default: dev_dbg(&ihost->pdev->dev, "%s: phy %p; func %d NOT IMPLEMENTED!\n", __func__, sas_phy, func); ret = -ENOSYS; break; } return ret; }