/* * Universal Interface for Intel High Definition Audio Codec * * HD audio interface patch for ALC 260/880/882 codecs * * Copyright (c) 2004 Kailang Yang * PeiSen Hou * Takashi Iwai * Jonathan Woithe * * This driver is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This driver is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include #include #include #include #include #include #include "hda_codec.h" #include "hda_local.h" /* ALC880 board config type */ enum { ALC880_3ST, ALC880_3ST_DIG, ALC880_5ST, ALC880_5ST_DIG, ALC880_W810, ALC880_Z71V, ALC880_6ST, ALC880_6ST_DIG, ALC880_F1734, ALC880_ASUS, ALC880_ASUS_DIG, ALC880_ASUS_W1V, ALC880_ASUS_DIG2, ALC880_UNIWILL_DIG, ALC880_CLEVO, ALC880_TCL_S700, ALC880_LG, ALC880_LG_LW, #ifdef CONFIG_SND_DEBUG ALC880_TEST, #endif ALC880_AUTO, ALC880_MODEL_LAST /* last tag */ }; /* ALC260 models */ enum { ALC260_BASIC, ALC260_HP, ALC260_HP_3013, ALC260_FUJITSU_S702X, ALC260_ACER, #ifdef CONFIG_SND_DEBUG ALC260_TEST, #endif ALC260_AUTO, ALC260_MODEL_LAST /* last tag */ }; /* ALC262 models */ enum { ALC262_BASIC, ALC262_FUJITSU, ALC262_HP_BPC, ALC262_BENQ_ED8, ALC262_AUTO, ALC262_MODEL_LAST /* last tag */ }; /* ALC861 models */ enum { ALC861_3ST, ALC660_3ST, ALC861_3ST_DIG, ALC861_6ST_DIG, ALC861_AUTO, ALC861_MODEL_LAST, }; /* ALC882 models */ enum { ALC882_3ST_DIG, ALC882_6ST_DIG, ALC882_ARIMA, ALC882_AUTO, ALC882_MODEL_LAST, }; /* ALC883 models */ enum { ALC883_3ST_2ch_DIG, ALC883_3ST_6ch_DIG, ALC883_3ST_6ch, ALC883_6ST_DIG, ALC888_DEMO_BOARD, ALC883_AUTO, ALC883_MODEL_LAST, }; /* for GPIO Poll */ #define GPIO_MASK 0x03 struct alc_spec { /* codec parameterization */ struct snd_kcontrol_new *mixers[5]; /* mixer arrays */ unsigned int num_mixers; const struct hda_verb *init_verbs[5]; /* initialization verbs * don't forget NULL * termination! */ unsigned int num_init_verbs; char *stream_name_analog; /* analog PCM stream */ struct hda_pcm_stream *stream_analog_playback; struct hda_pcm_stream *stream_analog_capture; char *stream_name_digital; /* digital PCM stream */ struct hda_pcm_stream *stream_digital_playback; struct hda_pcm_stream *stream_digital_capture; /* playback */ struct hda_multi_out multiout; /* playback set-up * max_channels, dacs must be set * dig_out_nid and hp_nid are optional */ /* capture */ unsigned int num_adc_nids; hda_nid_t *adc_nids; hda_nid_t dig_in_nid; /* digital-in NID; optional */ /* capture source */ unsigned int num_mux_defs; const struct hda_input_mux *input_mux; unsigned int cur_mux[3]; /* channel model */ const struct hda_channel_mode *channel_mode; int num_channel_mode; int need_dac_fix; /* PCM information */ struct hda_pcm pcm_rec[3]; /* used in alc_build_pcms() */ /* dynamic controls, init_verbs and input_mux */ struct auto_pin_cfg autocfg; unsigned int num_kctl_alloc, num_kctl_used; struct snd_kcontrol_new *kctl_alloc; struct hda_input_mux private_imux; hda_nid_t private_dac_nids[5]; /* hooks */ void (*init_hook)(struct hda_codec *codec); void (*unsol_event)(struct hda_codec *codec, unsigned int res); /* for pin sensing */ unsigned int sense_updated: 1; unsigned int jack_present: 1; }; /* * configuration template - to be copied to the spec instance */ struct alc_config_preset { struct snd_kcontrol_new *mixers[5]; /* should be identical size * with spec */ const struct hda_verb *init_verbs[5]; unsigned int num_dacs; hda_nid_t *dac_nids; hda_nid_t dig_out_nid; /* optional */ hda_nid_t hp_nid; /* optional */ unsigned int num_adc_nids; hda_nid_t *adc_nids; hda_nid_t dig_in_nid; unsigned int num_channel_mode; const struct hda_channel_mode *channel_mode; int need_dac_fix; unsigned int num_mux_defs; const struct hda_input_mux *input_mux; void (*unsol_event)(struct hda_codec *, unsigned int); void (*init_hook)(struct hda_codec *); }; /* * input MUX handling */ static int alc_mux_enum_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); struct alc_spec *spec = codec->spec; unsigned int mux_idx = snd_ctl_get_ioffidx(kcontrol, &uinfo->id); if (mux_idx >= spec->num_mux_defs) mux_idx = 0; return snd_hda_input_mux_info(&spec->input_mux[mux_idx], uinfo); } static int alc_mux_enum_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); struct alc_spec *spec = codec->spec; unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id); ucontrol->value.enumerated.item[0] = spec->cur_mux[adc_idx]; return 0; } static int alc_mux_enum_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); struct alc_spec *spec = codec->spec; unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id); unsigned int mux_idx = adc_idx >= spec->num_mux_defs ? 0 : adc_idx; return snd_hda_input_mux_put(codec, &spec->input_mux[mux_idx], ucontrol, spec->adc_nids[adc_idx], &spec->cur_mux[adc_idx]); } /* * channel mode setting */ static int alc_ch_mode_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); struct alc_spec *spec = codec->spec; return snd_hda_ch_mode_info(codec, uinfo, spec->channel_mode, spec->num_channel_mode); } static int alc_ch_mode_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); struct alc_spec *spec = codec->spec; return snd_hda_ch_mode_get(codec, ucontrol, spec->channel_mode, spec->num_channel_mode, spec->multiout.max_channels); } static int alc_ch_mode_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); struct alc_spec *spec = codec->spec; int err = snd_hda_ch_mode_put(codec, ucontrol, spec->channel_mode, spec->num_channel_mode, &spec->multiout.max_channels); if (! err && spec->need_dac_fix) spec->multiout.num_dacs = spec->multiout.max_channels / 2; return err; } /* * Control the mode of pin widget settings via the mixer. "pc" is used * instead of "%" to avoid consequences of accidently treating the % as * being part of a format specifier. Maximum allowed length of a value is * 63 characters plus NULL terminator. * * Note: some retasking pin complexes seem to ignore requests for input * states other than HiZ (eg: PIN_VREFxx) and revert to HiZ if any of these * are requested. Therefore order this list so that this behaviour will not * cause problems when mixer clients move through the enum sequentially. * NIDs 0x0f and 0x10 have been observed to have this behaviour as of * March 2006. */ static char *alc_pin_mode_names[] = { "Mic 50pc bias", "Mic 80pc bias", "Line in", "Line out", "Headphone out", }; static unsigned char alc_pin_mode_values[] = { PIN_VREF50, PIN_VREF80, PIN_IN, PIN_OUT, PIN_HP, }; /* The control can present all 5 options, or it can limit the options based * in the pin being assumed to be exclusively an input or an output pin. In * addition, "input" pins may or may not process the mic bias option * depending on actual widget capability (NIDs 0x0f and 0x10 don't seem to * accept requests for bias as of chip versions up to March 2006) and/or * wiring in the computer. */ #define ALC_PIN_DIR_IN 0x00 #define ALC_PIN_DIR_OUT 0x01 #define ALC_PIN_DIR_INOUT 0x02 #define ALC_PIN_DIR_IN_NOMICBIAS 0x03 #define ALC_PIN_DIR_INOUT_NOMICBIAS 0x04 /* Info about the pin modes supported by the different pin direction modes. * For each direction the minimum and maximum values are given. */ static signed char alc_pin_mode_dir_info[5][2] = { { 0, 2 }, /* ALC_PIN_DIR_IN */ { 3, 4 }, /* ALC_PIN_DIR_OUT */ { 0, 4 }, /* ALC_PIN_DIR_INOUT */ { 2, 2 }, /* ALC_PIN_DIR_IN_NOMICBIAS */ { 2, 4 }, /* ALC_PIN_DIR_INOUT_NOMICBIAS */ }; #define alc_pin_mode_min(_dir) (alc_pin_mode_dir_info[_dir][0]) #define alc_pin_mode_max(_dir) (alc_pin_mode_dir_info[_dir][1]) #define alc_pin_mode_n_items(_dir) \ (alc_pin_mode_max(_dir)-alc_pin_mode_min(_dir)+1) static int alc_pin_mode_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) { unsigned int item_num = uinfo->value.enumerated.item; unsigned char dir = (kcontrol->private_value >> 16) & 0xff; uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; uinfo->count = 1; uinfo->value.enumerated.items = alc_pin_mode_n_items(dir); if (item_numalc_pin_mode_max(dir)) item_num = alc_pin_mode_min(dir); strcpy(uinfo->value.enumerated.name, alc_pin_mode_names[item_num]); return 0; } static int alc_pin_mode_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { unsigned int i; struct hda_codec *codec = snd_kcontrol_chip(kcontrol); hda_nid_t nid = kcontrol->private_value & 0xffff; unsigned char dir = (kcontrol->private_value >> 16) & 0xff; long *valp = ucontrol->value.integer.value; unsigned int pinctl = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_PIN_WIDGET_CONTROL, 0x00); /* Find enumerated value for current pinctl setting */ i = alc_pin_mode_min(dir); while (alc_pin_mode_values[i] != pinctl && i <= alc_pin_mode_max(dir)) i++; *valp = i <= alc_pin_mode_max(dir) ? i: alc_pin_mode_min(dir); return 0; } static int alc_pin_mode_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { signed int change; struct hda_codec *codec = snd_kcontrol_chip(kcontrol); hda_nid_t nid = kcontrol->private_value & 0xffff; unsigned char dir = (kcontrol->private_value >> 16) & 0xff; long val = *ucontrol->value.integer.value; unsigned int pinctl = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_PIN_WIDGET_CONTROL, 0x00); if (val < alc_pin_mode_min(dir) || val > alc_pin_mode_max(dir)) val = alc_pin_mode_min(dir); change = pinctl != alc_pin_mode_values[val]; if (change) { /* Set pin mode to that requested */ snd_hda_codec_write(codec,nid,0,AC_VERB_SET_PIN_WIDGET_CONTROL, alc_pin_mode_values[val]); /* Also enable the retasking pin's input/output as required * for the requested pin mode. Enum values of 2 or less are * input modes. * * Dynamically switching the input/output buffers probably * reduces noise slightly (particularly on input) so we'll * do it. However, having both input and output buffers * enabled simultaneously doesn't seem to be problematic if * this turns out to be necessary in the future. */ if (val <= 2) { snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE); snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)); } else { snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)); snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE); } } return change; } #define ALC_PIN_MODE(xname, nid, dir) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \ .info = alc_pin_mode_info, \ .get = alc_pin_mode_get, \ .put = alc_pin_mode_put, \ .private_value = nid | (dir<<16) } /* A switch control for ALC260 GPIO pins. Multiple GPIOs can be ganged * together using a mask with more than one bit set. This control is * currently used only by the ALC260 test model. At this stage they are not * needed for any "production" models. */ #ifdef CONFIG_SND_DEBUG static int alc_gpio_data_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) { uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; uinfo->count = 1; uinfo->value.integer.min = 0; uinfo->value.integer.max = 1; return 0; } static int alc_gpio_data_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); hda_nid_t nid = kcontrol->private_value & 0xffff; unsigned char mask = (kcontrol->private_value >> 16) & 0xff; long *valp = ucontrol->value.integer.value; unsigned int val = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_GPIO_DATA, 0x00); *valp = (val & mask) != 0; return 0; } static int alc_gpio_data_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { signed int change; struct hda_codec *codec = snd_kcontrol_chip(kcontrol); hda_nid_t nid = kcontrol->private_value & 0xffff; unsigned char mask = (kcontrol->private_value >> 16) & 0xff; long val = *ucontrol->value.integer.value; unsigned int gpio_data = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_GPIO_DATA, 0x00); /* Set/unset the masked GPIO bit(s) as needed */ change = (val == 0 ? 0 : mask) != (gpio_data & mask); if (val == 0) gpio_data &= ~mask; else gpio_data |= mask; snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_GPIO_DATA, gpio_data); return change; } #define ALC_GPIO_DATA_SWITCH(xname, nid, mask) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \ .info = alc_gpio_data_info, \ .get = alc_gpio_data_get, \ .put = alc_gpio_data_put, \ .private_value = nid | (mask<<16) } #endif /* CONFIG_SND_DEBUG */ /* A switch control to allow the enabling of the digital IO pins on the * ALC260. This is incredibly simplistic; the intention of this control is * to provide something in the test model allowing digital outputs to be * identified if present. If models are found which can utilise these * outputs a more complete mixer control can be devised for those models if * necessary. */ #ifdef CONFIG_SND_DEBUG static int alc_spdif_ctrl_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) { uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; uinfo->count = 1; uinfo->value.integer.min = 0; uinfo->value.integer.max = 1; return 0; } static int alc_spdif_ctrl_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); hda_nid_t nid = kcontrol->private_value & 0xffff; unsigned char mask = (kcontrol->private_value >> 16) & 0xff; long *valp = ucontrol->value.integer.value; unsigned int val = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_DIGI_CONVERT, 0x00); *valp = (val & mask) != 0; return 0; } static int alc_spdif_ctrl_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { signed int change; struct hda_codec *codec = snd_kcontrol_chip(kcontrol); hda_nid_t nid = kcontrol->private_value & 0xffff; unsigned char mask = (kcontrol->private_value >> 16) & 0xff; long val = *ucontrol->value.integer.value; unsigned int ctrl_data = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_DIGI_CONVERT, 0x00); /* Set/unset the masked control bit(s) as needed */ change = (val == 0 ? 0 : mask) != (ctrl_data & mask); if (val==0) ctrl_data &= ~mask; else ctrl_data |= mask; snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_DIGI_CONVERT_1, ctrl_data); return change; } #define ALC_SPDIF_CTRL_SWITCH(xname, nid, mask) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \ .info = alc_spdif_ctrl_info, \ .get = alc_spdif_ctrl_get, \ .put = alc_spdif_ctrl_put, \ .private_value = nid | (mask<<16) } #endif /* CONFIG_SND_DEBUG */ /* * set up from the preset table */ static void setup_preset(struct alc_spec *spec, const struct alc_config_preset *preset) { int i; for (i = 0; i < ARRAY_SIZE(preset->mixers) && preset->mixers[i]; i++) spec->mixers[spec->num_mixers++] = preset->mixers[i]; for (i = 0; i < ARRAY_SIZE(preset->init_verbs) && preset->init_verbs[i]; i++) spec->init_verbs[spec->num_init_verbs++] = preset->init_verbs[i]; spec->channel_mode = preset->channel_mode; spec->num_channel_mode = preset->num_channel_mode; spec->need_dac_fix = preset->need_dac_fix; spec->multiout.max_channels = spec->channel_mode[0].channels; spec->multiout.num_dacs = preset->num_dacs; spec->multiout.dac_nids = preset->dac_nids; spec->multiout.dig_out_nid = preset->dig_out_nid; spec->multiout.hp_nid = preset->hp_nid; spec->num_mux_defs = preset->num_mux_defs; if (! spec->num_mux_defs) spec->num_mux_defs = 1; spec->input_mux = preset->input_mux; spec->num_adc_nids = preset->num_adc_nids; spec->adc_nids = preset->adc_nids; spec->dig_in_nid = preset->dig_in_nid; spec->unsol_event = preset->unsol_event; spec->init_hook = preset->init_hook; } /* * ALC880 3-stack model * * DAC: Front = 0x02 (0x0c), Surr = 0x05 (0x0f), CLFE = 0x04 (0x0e) * Pin assignment: Front = 0x14, Line-In/Surr = 0x1a, Mic/CLFE = 0x18, * F-Mic = 0x1b, HP = 0x19 */ static hda_nid_t alc880_dac_nids[4] = { /* front, rear, clfe, rear_surr */ 0x02, 0x05, 0x04, 0x03 }; static hda_nid_t alc880_adc_nids[3] = { /* ADC0-2 */ 0x07, 0x08, 0x09, }; /* The datasheet says the node 0x07 is connected from inputs, * but it shows zero connection in the real implementation on some devices. * Note: this is a 915GAV bug, fixed on 915GLV */ static hda_nid_t alc880_adc_nids_alt[2] = { /* ADC1-2 */ 0x08, 0x09, }; #define ALC880_DIGOUT_NID 0x06 #define ALC880_DIGIN_NID 0x0a static struct hda_input_mux alc880_capture_source = { .num_items = 4, .items = { { "Mic", 0x0 }, { "Front Mic", 0x3 }, { "Line", 0x2 }, { "CD", 0x4 }, }, }; /* channel source setting (2/6 channel selection for 3-stack) */ /* 2ch mode */ static struct hda_verb alc880_threestack_ch2_init[] = { /* set line-in to input, mute it */ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN }, { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, /* set mic-in to input vref 80%, mute it */ { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, { } /* end */ }; /* 6ch mode */ static struct hda_verb alc880_threestack_ch6_init[] = { /* set line-in to output, unmute it */ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, /* set mic-in to output, unmute it */ { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, { } /* end */ }; static struct hda_channel_mode alc880_threestack_modes[2] = { { 2, alc880_threestack_ch2_init }, { 6, alc880_threestack_ch6_init }, }; static struct snd_kcontrol_new alc880_three_stack_mixer[] = { HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), HDA_CODEC_VOLUME("Surround Playback Volume", 0x0f, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Surround Playback Switch", 0x0f, 2, HDA_INPUT), HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT), HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT), HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT), HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x3, HDA_INPUT), HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x3, HDA_INPUT), HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT), HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT), HDA_CODEC_MUTE("Headphone Playback Switch", 0x19, 0x0, HDA_OUTPUT), { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Channel Mode", .info = alc_ch_mode_info, .get = alc_ch_mode_get, .put = alc_ch_mode_put, }, { } /* end */ }; /* capture mixer elements */ static struct snd_kcontrol_new alc880_capture_mixer[] = { HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT), HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT), HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT), HDA_CODEC_VOLUME_IDX("Capture Volume", 2, 0x09, 0x0, HDA_INPUT), HDA_CODEC_MUTE_IDX("Capture Switch", 2, 0x09, 0x0, HDA_INPUT), { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, /* The multiple "Capture Source" controls confuse alsamixer * So call somewhat different.. * FIXME: the controls appear in the "playback" view! */ /* .name = "Capture Source", */ .name = "Input Source", .count = 3, .info = alc_mux_enum_info, .get = alc_mux_enum_get, .put = alc_mux_enum_put, }, { } /* end */ }; /* capture mixer elements (in case NID 0x07 not available) */ static struct snd_kcontrol_new alc880_capture_alt_mixer[] = { HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT), HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT), HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT), { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, /* The multiple "Capture Source" controls confuse alsamixer * So call somewhat different.. * FIXME: the controls appear in the "playback" view! */ /* .name = "Capture Source", */ .name = "Input Source", .count = 2, .info = alc_mux_enum_info, .get = alc_mux_enum_get, .put = alc_mux_enum_put, }, { } /* end */ }; /* * ALC880 5-stack model * * DAC: Front = 0x02 (0x0c), Surr = 0x05 (0x0f), CLFE = 0x04 (0x0d), * Side = 0x02 (0xd) * Pin assignment: Front = 0x14, Surr = 0x17, CLFE = 0x16 * Line-In/Side = 0x1a, Mic = 0x18, F-Mic = 0x1b, HP = 0x19 */ /* additional mixers to alc880_three_stack_mixer */ static struct snd_kcontrol_new alc880_five_stack_mixer[] = { HDA_CODEC_VOLUME("Side Playback Volume", 0x0d, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Side Playback Switch", 0x0d, 2, HDA_INPUT), { } /* end */ }; /* channel source setting (6/8 channel selection for 5-stack) */ /* 6ch mode */ static struct hda_verb alc880_fivestack_ch6_init[] = { /* set line-in to input, mute it */ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN }, { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, { } /* end */ }; /* 8ch mode */ static struct hda_verb alc880_fivestack_ch8_init[] = { /* set line-in to output, unmute it */ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, { } /* end */ }; static struct hda_channel_mode alc880_fivestack_modes[2] = { { 6, alc880_fivestack_ch6_init }, { 8, alc880_fivestack_ch8_init }, }; /* * ALC880 6-stack model * * DAC: Front = 0x02 (0x0c), Surr = 0x03 (0x0d), CLFE = 0x04 (0x0e), * Side = 0x05 (0x0f) * Pin assignment: Front = 0x14, Surr = 0x15, CLFE = 0x16, Side = 0x17, * Mic = 0x18, F-Mic = 0x19, Line = 0x1a, HP = 0x1b */ static hda_nid_t alc880_6st_dac_nids[4] = { /* front, rear, clfe, rear_surr */ 0x02, 0x03, 0x04, 0x05 }; static struct hda_input_mux alc880_6stack_capture_source = { .num_items = 4, .items = { { "Mic", 0x0 }, { "Front Mic", 0x1 }, { "Line", 0x2 }, { "CD", 0x4 }, }, }; /* fixed 8-channels */ static struct hda_channel_mode alc880_sixstack_modes[1] = { { 8, NULL }, }; static struct snd_kcontrol_new alc880_six_stack_mixer[] = { HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT), HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT), HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT), HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT), HDA_CODEC_VOLUME("Side Playback Volume", 0x0f, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Side Playback Switch", 0x0f, 2, HDA_INPUT), HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT), HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT), HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT), HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT), { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Channel Mode", .info = alc_ch_mode_info, .get = alc_ch_mode_get, .put = alc_ch_mode_put, }, { } /* end */ }; /* * ALC880 W810 model * * W810 has rear IO for: * Front (DAC 02) * Surround (DAC 03) * Center/LFE (DAC 04) * Digital out (06) * * The system also has a pair of internal speakers, and a headphone jack. * These are both connected to Line2 on the codec, hence to DAC 02. * * There is a variable resistor to control the speaker or headphone * volume. This is a hardware-only device without a software API. * * Plugging headphones in will disable the internal speakers. This is * implemented in hardware, not via the driver using jack sense. In * a similar fashion, plugging into the rear socket marked "front" will * disable both the speakers and headphones. * * For input, there's a microphone jack, and an "audio in" jack. * These may not do anything useful with this driver yet, because I * haven't setup any initialization verbs for these yet... */ static hda_nid_t alc880_w810_dac_nids[3] = { /* front, rear/surround, clfe */ 0x02, 0x03, 0x04 }; /* fixed 6 channels */ static struct hda_channel_mode alc880_w810_modes[1] = { { 6, NULL } }; /* Pin assignment: Front = 0x14, Surr = 0x15, CLFE = 0x16, HP = 0x1b */ static struct snd_kcontrol_new alc880_w810_base_mixer[] = { HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT), HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT), HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT), HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT), HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT), { } /* end */ }; /* * Z710V model * * DAC: Front = 0x02 (0x0c), HP = 0x03 (0x0d) * Pin assignment: Front = 0x14, HP = 0x15, Mic = 0x18, Mic2 = 0x19(?), * Line = 0x1a */ static hda_nid_t alc880_z71v_dac_nids[1] = { 0x02 }; #define ALC880_Z71V_HP_DAC 0x03 /* fixed 2 channels */ static struct hda_channel_mode alc880_2_jack_modes[1] = { { 2, NULL } }; static struct snd_kcontrol_new alc880_z71v_mixer[] = { HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0d, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Headphone Playback Switch", 0x0d, 2, HDA_INPUT), HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), { } /* end */ }; /* FIXME! */ /* * ALC880 F1734 model * * DAC: HP = 0x02 (0x0c), Front = 0x03 (0x0d) * Pin assignment: HP = 0x14, Front = 0x15, Mic = 0x18 */ static hda_nid_t alc880_f1734_dac_nids[1] = { 0x03 }; #define ALC880_F1734_HP_DAC 0x02 static struct snd_kcontrol_new alc880_f1734_mixer[] = { HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0c, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Headphone Playback Switch", 0x0c, 2, HDA_INPUT), HDA_CODEC_VOLUME("Internal Speaker Playback Volume", 0x0d, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Internal Speaker Playback Switch", 0x0d, 2, HDA_INPUT), HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), { } /* end */ }; /* FIXME! */ /* * ALC880 ASUS model * * DAC: HP/Front = 0x02 (0x0c), Surr = 0x03 (0x0d), CLFE = 0x04 (0x0e) * Pin assignment: HP/Front = 0x14, Surr = 0x15, CLFE = 0x16, * Mic = 0x18, Line = 0x1a */ #define alc880_asus_dac_nids alc880_w810_dac_nids /* identical with w810 */ #define alc880_asus_modes alc880_threestack_modes /* 2/6 channel mode */ static struct snd_kcontrol_new alc880_asus_mixer[] = { HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT), HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT), HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT), HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT), HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Channel Mode", .info = alc_ch_mode_info, .get = alc_ch_mode_get, .put = alc_ch_mode_put, }, { } /* end */ }; /* FIXME! */ /* * ALC880 ASUS W1V model * * DAC: HP/Front = 0x02 (0x0c), Surr = 0x03 (0x0d), CLFE = 0x04 (0x0e) * Pin assignment: HP/Front = 0x14, Surr = 0x15, CLFE = 0x16, * Mic = 0x18, Line = 0x1a, Line2 = 0x1b */ /* additional mixers to alc880_asus_mixer */ static struct snd_kcontrol_new alc880_asus_w1v_mixer[] = { HDA_CODEC_VOLUME("Line2 Playback Volume", 0x0b, 0x03, HDA_INPUT), HDA_CODEC_MUTE("Line2 Playback Switch", 0x0b, 0x03, HDA_INPUT), { } /* end */ }; /* additional mixers to alc880_asus_mixer */ static struct snd_kcontrol_new alc880_pcbeep_mixer[] = { HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT), HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT), { } /* end */ }; /* TCL S700 */ static struct snd_kcontrol_new alc880_tcl_s700_mixer[] = { HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Front Playback Switch", 0x1b, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Headphone Playback Switch", 0x14, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("CD Playback Volume", 0x0B, 0x04, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x0B, 0x04, HDA_INPUT), HDA_CODEC_VOLUME("Mic Playback Volume", 0x0B, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Mic Playback Switch", 0x0B, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT), { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, /* The multiple "Capture Source" controls confuse alsamixer * So call somewhat different.. * FIXME: the controls appear in the "playback" view! */ /* .name = "Capture Source", */ .name = "Input Source", .count = 1, .info = alc_mux_enum_info, .get = alc_mux_enum_get, .put = alc_mux_enum_put, }, { } /* end */ }; /* * build control elements */ static int alc_build_controls(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; int err; int i; for (i = 0; i < spec->num_mixers; i++) { err = snd_hda_add_new_ctls(codec, spec->mixers[i]); if (err < 0) return err; } if (spec->multiout.dig_out_nid) { err = snd_hda_create_spdif_out_ctls(codec, spec->multiout.dig_out_nid); if (err < 0) return err; } if (spec->dig_in_nid) { err = snd_hda_create_spdif_in_ctls(codec, spec->dig_in_nid); if (err < 0) return err; } return 0; } /* * initialize the codec volumes, etc */ /* * generic initialization of ADC, input mixers and output mixers */ static struct hda_verb alc880_volume_init_verbs[] = { /* * Unmute ADC0-2 and set the default input to mic-in */ {0x07, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x08, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x09, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback * mixer widget * Note: PASD motherboards uses the Line In 2 as the input for front * panel mic (mic 2) */ /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)}, /* * Set up output mixers (0x0c - 0x0f) */ /* set vol=0 to output mixers */ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, /* set up input amps for analog loopback */ /* Amp Indices: DAC = 0, mixer = 1 */ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, { } }; /* * 3-stack pin configuration: * front = 0x14, mic/clfe = 0x18, HP = 0x19, line/surr = 0x1a, f-mic = 0x1b */ static struct hda_verb alc880_pin_3stack_init_verbs[] = { /* * preset connection lists of input pins * 0 = front, 1 = rear_surr, 2 = CLFE, 3 = surround */ {0x10, AC_VERB_SET_CONNECT_SEL, 0x02}, /* mic/clfe */ {0x11, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP */ {0x12, AC_VERB_SET_CONNECT_SEL, 0x03}, /* line/surround */ /* * Set pin mode and muting */ /* set front pin widgets 0x14 for output */ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Mic1 (rear panel) pin widget for input and vref at 80% */ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* Mic2 (as headphone out) for HP output */ {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Line In pin widget for input */ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* Line2 (as front mic) pin widget for input and vref at 80% */ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* CD pin widget for input */ {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, { } }; /* * 5-stack pin configuration: * front = 0x14, surround = 0x17, clfe = 0x16, mic = 0x18, HP = 0x19, * line-in/side = 0x1a, f-mic = 0x1b */ static struct hda_verb alc880_pin_5stack_init_verbs[] = { /* * preset connection lists of input pins * 0 = front, 1 = rear_surr, 2 = CLFE, 3 = surround */ {0x11, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP */ {0x12, AC_VERB_SET_CONNECT_SEL, 0x01}, /* line/side */ /* * Set pin mode and muting */ /* set pin widgets 0x14-0x17 for output */ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, /* unmute pins for output (no gain on this amp) */ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Mic1 (rear panel) pin widget for input and vref at 80% */ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* Mic2 (as headphone out) for HP output */ {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Line In pin widget for input */ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* Line2 (as front mic) pin widget for input and vref at 80% */ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* CD pin widget for input */ {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, { } }; /* * W810 pin configuration: * front = 0x14, surround = 0x15, clfe = 0x16, HP = 0x1b */ static struct hda_verb alc880_pin_w810_init_verbs[] = { /* hphone/speaker input selector: front DAC */ {0x13, AC_VERB_SET_CONNECT_SEL, 0x0}, {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, { } }; /* * Z71V pin configuration: * Speaker-out = 0x14, HP = 0x15, Mic = 0x18, Line-in = 0x1a, Mic2 = 0x1b (?) */ static struct hda_verb alc880_pin_z71v_init_verbs[] = { {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, { } }; /* * 6-stack pin configuration: * front = 0x14, surr = 0x15, clfe = 0x16, side = 0x17, mic = 0x18, * f-mic = 0x19, line = 0x1a, HP = 0x1b */ static struct hda_verb alc880_pin_6stack_init_verbs[] = { {0x13, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP */ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, { } }; /* FIXME! */ /* * F1734 pin configuration: * HP = 0x14, speaker-out = 0x15, mic = 0x18 */ static struct hda_verb alc880_pin_f1734_init_verbs[] = { {0x10, AC_VERB_SET_CONNECT_SEL, 0x02}, {0x11, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x12, AC_VERB_SET_CONNECT_SEL, 0x01}, {0x13, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, { } }; /* FIXME! */ /* * ASUS pin configuration: * HP/front = 0x14, surr = 0x15, clfe = 0x16, mic = 0x18, line = 0x1a */ static struct hda_verb alc880_pin_asus_init_verbs[] = { {0x10, AC_VERB_SET_CONNECT_SEL, 0x02}, {0x11, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x12, AC_VERB_SET_CONNECT_SEL, 0x01}, {0x13, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, { } }; /* Enable GPIO mask and set output */ static struct hda_verb alc880_gpio1_init_verbs[] = { {0x01, AC_VERB_SET_GPIO_MASK, 0x01}, {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01}, {0x01, AC_VERB_SET_GPIO_DATA, 0x01}, { } }; /* Enable GPIO mask and set output */ static struct hda_verb alc880_gpio2_init_verbs[] = { {0x01, AC_VERB_SET_GPIO_MASK, 0x02}, {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x02}, {0x01, AC_VERB_SET_GPIO_DATA, 0x02}, { } }; /* Clevo m520g init */ static struct hda_verb alc880_pin_clevo_init_verbs[] = { /* headphone output */ {0x11, AC_VERB_SET_CONNECT_SEL, 0x01}, /* line-out */ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Line-in */ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* CD */ {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, {0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Mic1 (rear panel) */ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Mic2 (front panel) */ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* headphone */ {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* change to EAPD mode */ {0x20, AC_VERB_SET_COEF_INDEX, 0x07}, {0x20, AC_VERB_SET_PROC_COEF, 0x3060}, { } }; static struct hda_verb alc880_pin_tcl_S700_init_verbs[] = { /* change to EAPD mode */ {0x20, AC_VERB_SET_COEF_INDEX, 0x07}, {0x20, AC_VERB_SET_PROC_COEF, 0x3060}, /* Headphone output */ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, /* Front output*/ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00}, /* Line In pin widget for input */ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, /* CD pin widget for input */ {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, /* Mic1 (rear panel) pin widget for input and vref at 80% */ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, /* change to EAPD mode */ {0x20, AC_VERB_SET_COEF_INDEX, 0x07}, {0x20, AC_VERB_SET_PROC_COEF, 0x3070}, { } }; /* * LG m1 express dual * * Pin assignment: * Rear Line-In/Out (blue): 0x14 * Build-in Mic-In: 0x15 * Speaker-out: 0x17 * HP-Out (green): 0x1b * Mic-In/Out (red): 0x19 * SPDIF-Out: 0x1e */ /* To make 5.1 output working (green=Front, blue=Surr, red=CLFE) */ static hda_nid_t alc880_lg_dac_nids[3] = { 0x05, 0x02, 0x03 }; /* seems analog CD is not working */ static struct hda_input_mux alc880_lg_capture_source = { .num_items = 3, .items = { { "Mic", 0x1 }, { "Line", 0x5 }, { "Internal Mic", 0x6 }, }, }; /* 2,4,6 channel modes */ static struct hda_verb alc880_lg_ch2_init[] = { /* set line-in and mic-in to input */ { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN }, { 0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, { } }; static struct hda_verb alc880_lg_ch4_init[] = { /* set line-in to out and mic-in to input */ { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP }, { 0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, { } }; static struct hda_verb alc880_lg_ch6_init[] = { /* set line-in and mic-in to output */ { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP }, { 0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP }, { } }; static struct hda_channel_mode alc880_lg_ch_modes[3] = { { 2, alc880_lg_ch2_init }, { 4, alc880_lg_ch4_init }, { 6, alc880_lg_ch6_init }, }; static struct snd_kcontrol_new alc880_lg_mixer[] = { /* FIXME: it's not really "master" but front channels */ HDA_CODEC_VOLUME("Master Playback Volume", 0x0f, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Master Playback Switch", 0x0f, 2, HDA_INPUT), HDA_CODEC_VOLUME("Surround Playback Volume", 0x0c, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Surround Playback Switch", 0x0c, 2, HDA_INPUT), HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0d, 1, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0d, 2, 0x0, HDA_OUTPUT), HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0d, 1, 2, HDA_INPUT), HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0d, 2, 2, HDA_INPUT), HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x1, HDA_INPUT), HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x1, HDA_INPUT), HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x06, HDA_INPUT), HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x06, HDA_INPUT), HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x0b, 0x07, HDA_INPUT), HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x0b, 0x07, HDA_INPUT), { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Channel Mode", .info = alc_ch_mode_info, .get = alc_ch_mode_get, .put = alc_ch_mode_put, }, { } /* end */ }; static struct hda_verb alc880_lg_init_verbs[] = { /* set capture source to mic-in */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, /* mute all amp mixer inputs */ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(5)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(6)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(7)}, /* line-in to input */ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* built-in mic */ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* speaker-out */ {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* mic-in to input */ {0x11, AC_VERB_SET_CONNECT_SEL, 0x01}, {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* HP-out */ {0x13, AC_VERB_SET_CONNECT_SEL, 0x03}, {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* jack sense */ {0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | 0x1}, { } }; /* toggle speaker-output according to the hp-jack state */ static void alc880_lg_automute(struct hda_codec *codec) { unsigned int present; present = snd_hda_codec_read(codec, 0x1b, 0, AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; snd_hda_codec_amp_update(codec, 0x17, 0, HDA_OUTPUT, 0, 0x80, present ? 0x80 : 0); snd_hda_codec_amp_update(codec, 0x17, 1, HDA_OUTPUT, 0, 0x80, present ? 0x80 : 0); } static void alc880_lg_unsol_event(struct hda_codec *codec, unsigned int res) { /* Looks like the unsol event is incompatible with the standard * definition. 4bit tag is placed at 28 bit! */ if ((res >> 28) == 0x01) alc880_lg_automute(codec); } /* * LG LW20 * * Pin assignment: * Speaker-out: 0x14 * Mic-In: 0x18 * Built-in Mic-In: 0x19 (?) * HP-Out: 0x1b * SPDIF-Out: 0x1e */ /* seems analog CD is not working */ static struct hda_input_mux alc880_lg_lw_capture_source = { .num_items = 2, .items = { { "Mic", 0x0 }, { "Internal Mic", 0x1 }, }, }; static struct snd_kcontrol_new alc880_lg_lw_mixer[] = { HDA_CODEC_VOLUME("Master Playback Volume", 0x0c, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Master Playback Switch", 0x0c, 2, HDA_INPUT), HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x0b, 0x01, HDA_INPUT), HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x0b, 0x01, HDA_INPUT), { } /* end */ }; static struct hda_verb alc880_lg_lw_init_verbs[] = { /* set capture source to mic-in */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(7)}, /* speaker-out */ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* HP-out */ {0x13, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* mic-in to input */ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* built-in mic */ {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* jack sense */ {0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | 0x1}, { } }; /* toggle speaker-output according to the hp-jack state */ static void alc880_lg_lw_automute(struct hda_codec *codec) { unsigned int present; present = snd_hda_codec_read(codec, 0x1b, 0, AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; snd_hda_codec_amp_update(codec, 0x14, 0, HDA_OUTPUT, 0, 0x80, present ? 0x80 : 0); snd_hda_codec_amp_update(codec, 0x14, 1, HDA_OUTPUT, 0, 0x80, present ? 0x80 : 0); } static void alc880_lg_lw_unsol_event(struct hda_codec *codec, unsigned int res) { /* Looks like the unsol event is incompatible with the standard * definition. 4bit tag is placed at 28 bit! */ if ((res >> 28) == 0x01) alc880_lg_lw_automute(codec); } /* * Common callbacks */ static int alc_init(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; unsigned int i; for (i = 0; i < spec->num_init_verbs; i++) snd_hda_sequence_write(codec, spec->init_verbs[i]); if (spec->init_hook) spec->init_hook(codec); return 0; } static void alc_unsol_event(struct hda_codec *codec, unsigned int res) { struct alc_spec *spec = codec->spec; if (spec->unsol_event) spec->unsol_event(codec, res); } #ifdef CONFIG_PM /* * resume */ static int alc_resume(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; int i; alc_init(codec); for (i = 0; i < spec->num_mixers; i++) snd_hda_resume_ctls(codec, spec->mixers[i]); if (spec->multiout.dig_out_nid) snd_hda_resume_spdif_out(codec); if (spec->dig_in_nid) snd_hda_resume_spdif_in(codec); return 0; } #endif /* * Analog playback callbacks */ static int alc880_playback_pcm_open(struct hda_pcm_stream *hinfo, struct hda_codec *codec, struct snd_pcm_substream *substream) { struct alc_spec *spec = codec->spec; return snd_hda_multi_out_analog_open(codec, &spec->multiout, substream); } static int alc880_playback_pcm_prepare(struct hda_pcm_stream *hinfo, struct hda_codec *codec, unsigned int stream_tag, unsigned int format, struct snd_pcm_substream *substream) { struct alc_spec *spec = codec->spec; return snd_hda_multi_out_analog_prepare(codec, &spec->multiout, stream_tag, format, substream); } static int alc880_playback_pcm_cleanup(struct hda_pcm_stream *hinfo, struct hda_codec *codec, struct snd_pcm_substream *substream) { struct alc_spec *spec = codec->spec; return snd_hda_multi_out_analog_cleanup(codec, &spec->multiout); } /* * Digital out */ static int alc880_dig_playback_pcm_open(struct hda_pcm_stream *hinfo, struct hda_codec *codec, struct snd_pcm_substream *substream) { struct alc_spec *spec = codec->spec; return snd_hda_multi_out_dig_open(codec, &spec->multiout); } static int alc880_dig_playback_pcm_close(struct hda_pcm_stream *hinfo, struct hda_codec *codec, struct snd_pcm_substream *substream) { struct alc_spec *spec = codec->spec; return snd_hda_multi_out_dig_close(codec, &spec->multiout); } /* * Analog capture */ static int alc880_capture_pcm_prepare(struct hda_pcm_stream *hinfo, struct hda_codec *codec, unsigned int stream_tag, unsigned int format, struct snd_pcm_substream *substream) { struct alc_spec *spec = codec->spec; snd_hda_codec_setup_stream(codec, spec->adc_nids[substream->number], stream_tag, 0, format); return 0; } static int alc880_capture_pcm_cleanup(struct hda_pcm_stream *hinfo, struct hda_codec *codec, struct snd_pcm_substream *substream) { struct alc_spec *spec = codec->spec; snd_hda_codec_setup_stream(codec, spec->adc_nids[substream->number], 0, 0, 0); return 0; } /* */ static struct hda_pcm_stream alc880_pcm_analog_playback = { .substreams = 1, .channels_min = 2, .channels_max = 8, /* NID is set in alc_build_pcms */ .ops = { .open = alc880_playback_pcm_open, .prepare = alc880_playback_pcm_prepare, .cleanup = alc880_playback_pcm_cleanup }, }; static struct hda_pcm_stream alc880_pcm_analog_capture = { .substreams = 2, .channels_min = 2, .channels_max = 2, /* NID is set in alc_build_pcms */ .ops = { .prepare = alc880_capture_pcm_prepare, .cleanup = alc880_capture_pcm_cleanup }, }; static struct hda_pcm_stream alc880_pcm_digital_playback = { .substreams = 1, .channels_min = 2, .channels_max = 2, /* NID is set in alc_build_pcms */ .ops = { .open = alc880_dig_playback_pcm_open, .close = alc880_dig_playback_pcm_close }, }; static struct hda_pcm_stream alc880_pcm_digital_capture = { .substreams = 1, .channels_min = 2, .channels_max = 2, /* NID is set in alc_build_pcms */ }; /* Used by alc_build_pcms to flag that a PCM has no playback stream */ static struct hda_pcm_stream alc_pcm_null_playback = { .substreams = 0, .channels_min = 0, .channels_max = 0, }; static int alc_build_pcms(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; struct hda_pcm *info = spec->pcm_rec; int i; codec->num_pcms = 1; codec->pcm_info = info; info->name = spec->stream_name_analog; if (spec->stream_analog_playback) { snd_assert(spec->multiout.dac_nids, return -EINVAL); info->stream[SNDRV_PCM_STREAM_PLAYBACK] = *(spec->stream_analog_playback); info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->multiout.dac_nids[0]; } if (spec->stream_analog_capture) { snd_assert(spec->adc_nids, return -EINVAL); info->stream[SNDRV_PCM_STREAM_CAPTURE] = *(spec->stream_analog_capture); info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adc_nids[0]; } if (spec->channel_mode) { info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max = 0; for (i = 0; i < spec->num_channel_mode; i++) { if (spec->channel_mode[i].channels > info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max) { info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max = spec->channel_mode[i].channels; } } } /* If the use of more than one ADC is requested for the current * model, configure a second analog capture-only PCM. */ if (spec->num_adc_nids > 1) { codec->num_pcms++; info++; info->name = spec->stream_name_analog; /* No playback stream for second PCM */ info->stream[SNDRV_PCM_STREAM_PLAYBACK] = alc_pcm_null_playback; info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = 0; if (spec->stream_analog_capture) { snd_assert(spec->adc_nids, return -EINVAL); info->stream[SNDRV_PCM_STREAM_CAPTURE] = *(spec->stream_analog_capture); info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adc_nids[1]; } } if (spec->multiout.dig_out_nid || spec->dig_in_nid) { codec->num_pcms++; info++; info->name = spec->stream_name_digital; if (spec->multiout.dig_out_nid && spec->stream_digital_playback) { info->stream[SNDRV_PCM_STREAM_PLAYBACK] = *(spec->stream_digital_playback); info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->multiout.dig_out_nid; } if (spec->dig_in_nid && spec->stream_digital_capture) { info->stream[SNDRV_PCM_STREAM_CAPTURE] = *(spec->stream_digital_capture); info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->dig_in_nid; } } return 0; } static void alc_free(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; unsigned int i; if (! spec) return; if (spec->kctl_alloc) { for (i = 0; i < spec->num_kctl_used; i++) kfree(spec->kctl_alloc[i].name); kfree(spec->kctl_alloc); } kfree(spec); } /* */ static struct hda_codec_ops alc_patch_ops = { .build_controls = alc_build_controls, .build_pcms = alc_build_pcms, .init = alc_init, .free = alc_free, .unsol_event = alc_unsol_event, #ifdef CONFIG_PM .resume = alc_resume, #endif }; /* * Test configuration for debugging * * Almost all inputs/outputs are enabled. I/O pins can be configured via * enum controls. */ #ifdef CONFIG_SND_DEBUG static hda_nid_t alc880_test_dac_nids[4] = { 0x02, 0x03, 0x04, 0x05 }; static struct hda_input_mux alc880_test_capture_source = { .num_items = 7, .items = { { "In-1", 0x0 }, { "In-2", 0x1 }, { "In-3", 0x2 }, { "In-4", 0x3 }, { "CD", 0x4 }, { "Front", 0x5 }, { "Surround", 0x6 }, }, }; static struct hda_channel_mode alc880_test_modes[4] = { { 2, NULL }, { 4, NULL }, { 6, NULL }, { 8, NULL }, }; static int alc_test_pin_ctl_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) { static char *texts[] = { "N/A", "Line Out", "HP Out", "In Hi-Z", "In 50%", "In Grd", "In 80%", "In 100%" }; uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; uinfo->count = 1; uinfo->value.enumerated.items = 8; if (uinfo->value.enumerated.item >= 8) uinfo->value.enumerated.item = 7; strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]); return 0; } static int alc_test_pin_ctl_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); hda_nid_t nid = (hda_nid_t)kcontrol->private_value; unsigned int pin_ctl, item = 0; pin_ctl = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_PIN_WIDGET_CONTROL, 0); if (pin_ctl & AC_PINCTL_OUT_EN) { if (pin_ctl & AC_PINCTL_HP_EN) item = 2; else item = 1; } else if (pin_ctl & AC_PINCTL_IN_EN) { switch (pin_ctl & AC_PINCTL_VREFEN) { case AC_PINCTL_VREF_HIZ: item = 3; break; case AC_PINCTL_VREF_50: item = 4; break; case AC_PINCTL_VREF_GRD: item = 5; break; case AC_PINCTL_VREF_80: item = 6; break; case AC_PINCTL_VREF_100: item = 7; break; } } ucontrol->value.enumerated.item[0] = item; return 0; } static int alc_test_pin_ctl_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); hda_nid_t nid = (hda_nid_t)kcontrol->private_value; static unsigned int ctls[] = { 0, AC_PINCTL_OUT_EN, AC_PINCTL_OUT_EN | AC_PINCTL_HP_EN, AC_PINCTL_IN_EN | AC_PINCTL_VREF_HIZ, AC_PINCTL_IN_EN | AC_PINCTL_VREF_50, AC_PINCTL_IN_EN | AC_PINCTL_VREF_GRD, AC_PINCTL_IN_EN | AC_PINCTL_VREF_80, AC_PINCTL_IN_EN | AC_PINCTL_VREF_100, }; unsigned int old_ctl, new_ctl; old_ctl = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_PIN_WIDGET_CONTROL, 0); new_ctl = ctls[ucontrol->value.enumerated.item[0]]; if (old_ctl != new_ctl) { snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, new_ctl); snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, (ucontrol->value.enumerated.item[0] >= 3 ? 0xb080 : 0xb000)); return 1; } return 0; } static int alc_test_pin_src_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) { static char *texts[] = { "Front", "Surround", "CLFE", "Side" }; uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; uinfo->count = 1; uinfo->value.enumerated.items = 4; if (uinfo->value.enumerated.item >= 4) uinfo->value.enumerated.item = 3; strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]); return 0; } static int alc_test_pin_src_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); hda_nid_t nid = (hda_nid_t)kcontrol->private_value; unsigned int sel; sel = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_CONNECT_SEL, 0); ucontrol->value.enumerated.item[0] = sel & 3; return 0; } static int alc_test_pin_src_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); hda_nid_t nid = (hda_nid_t)kcontrol->private_value; unsigned int sel; sel = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_CONNECT_SEL, 0) & 3; if (ucontrol->value.enumerated.item[0] != sel) { sel = ucontrol->value.enumerated.item[0] & 3; snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CONNECT_SEL, sel); return 1; } return 0; } #define PIN_CTL_TEST(xname,nid) { \ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .info = alc_test_pin_ctl_info, \ .get = alc_test_pin_ctl_get, \ .put = alc_test_pin_ctl_put, \ .private_value = nid \ } #define PIN_SRC_TEST(xname,nid) { \ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .info = alc_test_pin_src_info, \ .get = alc_test_pin_src_get, \ .put = alc_test_pin_src_put, \ .private_value = nid \ } static struct snd_kcontrol_new alc880_test_mixer[] = { HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("CLFE Playback Volume", 0x0e, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("Side Playback Volume", 0x0f, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT), HDA_BIND_MUTE("CLFE Playback Switch", 0x0e, 2, HDA_INPUT), HDA_BIND_MUTE("Side Playback Switch", 0x0f, 2, HDA_INPUT), PIN_CTL_TEST("Front Pin Mode", 0x14), PIN_CTL_TEST("Surround Pin Mode", 0x15), PIN_CTL_TEST("CLFE Pin Mode", 0x16), PIN_CTL_TEST("Side Pin Mode", 0x17), PIN_CTL_TEST("In-1 Pin Mode", 0x18), PIN_CTL_TEST("In-2 Pin Mode", 0x19), PIN_CTL_TEST("In-3 Pin Mode", 0x1a), PIN_CTL_TEST("In-4 Pin Mode", 0x1b), PIN_SRC_TEST("In-1 Pin Source", 0x18), PIN_SRC_TEST("In-2 Pin Source", 0x19), PIN_SRC_TEST("In-3 Pin Source", 0x1a), PIN_SRC_TEST("In-4 Pin Source", 0x1b), HDA_CODEC_VOLUME("In-1 Playback Volume", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_MUTE("In-1 Playback Switch", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("In-2 Playback Volume", 0x0b, 0x1, HDA_INPUT), HDA_CODEC_MUTE("In-2 Playback Switch", 0x0b, 0x1, HDA_INPUT), HDA_CODEC_VOLUME("In-3 Playback Volume", 0x0b, 0x2, HDA_INPUT), HDA_CODEC_MUTE("In-3 Playback Switch", 0x0b, 0x2, HDA_INPUT), HDA_CODEC_VOLUME("In-4 Playback Volume", 0x0b, 0x3, HDA_INPUT), HDA_CODEC_MUTE("In-4 Playback Switch", 0x0b, 0x3, HDA_INPUT), HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x4, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x4, HDA_INPUT), { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Channel Mode", .info = alc_ch_mode_info, .get = alc_ch_mode_get, .put = alc_ch_mode_put, }, { } /* end */ }; static struct hda_verb alc880_test_init_verbs[] = { /* Unmute inputs of 0x0c - 0x0f */ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, /* Vol output for 0x0c-0x0f */ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, /* Set output pins 0x14-0x17 */ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, /* Unmute output pins 0x14-0x17 */ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Set input pins 0x18-0x1c */ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, /* Mute input pins 0x18-0x1b */ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* ADC set up */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x07, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x08, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x09, AC_VERB_SET_CONNECT_SEL, 0x00}, /* Analog input/passthru */ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, { } }; #endif /* */ static struct hda_board_config alc880_cfg_tbl[] = { /* Back 3 jack, front 2 jack */ { .modelname = "3stack", .config = ALC880_3ST }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xe200, .config = ALC880_3ST }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xe201, .config = ALC880_3ST }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xe202, .config = ALC880_3ST }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xe203, .config = ALC880_3ST }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xe204, .config = ALC880_3ST }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xe205, .config = ALC880_3ST }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xe206, .config = ALC880_3ST }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xe207, .config = ALC880_3ST }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xe208, .config = ALC880_3ST }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xe209, .config = ALC880_3ST }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xe20a, .config = ALC880_3ST }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xe20b, .config = ALC880_3ST }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xe20c, .config = ALC880_3ST }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xe20d, .config = ALC880_3ST }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xe20e, .config = ALC880_3ST }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xe20f, .config = ALC880_3ST }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xe210, .config = ALC880_3ST }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xe211, .config = ALC880_3ST }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xe214, .config = ALC880_3ST }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xe302, .config = ALC880_3ST }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xe303, .config = ALC880_3ST }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xe304, .config = ALC880_3ST }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xe306, .config = ALC880_3ST }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xe307, .config = ALC880_3ST }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xe404, .config = ALC880_3ST }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xa101, .config = ALC880_3ST }, { .pci_subvendor = 0x107b, .pci_subdevice = 0x3031, .config = ALC880_3ST }, { .pci_subvendor = 0x107b, .pci_subdevice = 0x4036, .config = ALC880_3ST }, { .pci_subvendor = 0x107b, .pci_subdevice = 0x4037, .config = ALC880_3ST }, { .pci_subvendor = 0x107b, .pci_subdevice = 0x4038, .config = ALC880_3ST }, { .pci_subvendor = 0x107b, .pci_subdevice = 0x4040, .config = ALC880_3ST }, { .pci_subvendor = 0x107b, .pci_subdevice = 0x4041, .config = ALC880_3ST }, /* TCL S700 */ { .modelname = "tcl", .config = ALC880_TCL_S700 }, { .pci_subvendor = 0x19db, .pci_subdevice = 0x4188, .config = ALC880_TCL_S700 }, /* Back 3 jack, front 2 jack (Internal add Aux-In) */ { .pci_subvendor = 0x1025, .pci_subdevice = 0xe310, .config = ALC880_3ST }, { .pci_subvendor = 0x104d, .pci_subdevice = 0x81d6, .config = ALC880_3ST }, { .pci_subvendor = 0x104d, .pci_subdevice = 0x81a0, .config = ALC880_3ST }, /* Back 3 jack plus 1 SPDIF out jack, front 2 jack */ { .modelname = "3stack-digout", .config = ALC880_3ST_DIG }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xe308, .config = ALC880_3ST_DIG }, { .pci_subvendor = 0x1025, .pci_subdevice = 0x0070, .config = ALC880_3ST_DIG }, /* Clevo laptops */ { .modelname = "clevo", .config = ALC880_CLEVO }, { .pci_subvendor = 0x1558, .pci_subdevice = 0x0520, .config = ALC880_CLEVO }, /* Clevo m520G NB */ { .pci_subvendor = 0x1558, .pci_subdevice = 0x0660, .config = ALC880_CLEVO }, /* Clevo m665n */ /* Back 3 jack plus 1 SPDIF out jack, front 2 jack (Internal add Aux-In)*/ { .pci_subvendor = 0x8086, .pci_subdevice = 0xe305, .config = ALC880_3ST_DIG }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xd402, .config = ALC880_3ST_DIG }, { .pci_subvendor = 0x1025, .pci_subdevice = 0xe309, .config = ALC880_3ST_DIG }, /* Back 5 jack, front 2 jack */ { .modelname = "5stack", .config = ALC880_5ST }, { .pci_subvendor = 0x107b, .pci_subdevice = 0x3033, .config = ALC880_5ST }, { .pci_subvendor = 0x107b, .pci_subdevice = 0x4039, .config = ALC880_5ST }, { .pci_subvendor = 0x107b, .pci_subdevice = 0x3032, .config = ALC880_5ST }, { .pci_subvendor = 0x103c, .pci_subdevice = 0x2a09, .config = ALC880_5ST }, { .pci_subvendor = 0x1043, .pci_subdevice = 0x814e, .config = ALC880_5ST }, /* Back 5 jack plus 1 SPDIF out jack, front 2 jack */ { .modelname = "5stack-digout", .config = ALC880_5ST_DIG }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xe224, .config = ALC880_5ST_DIG }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xe400, .config = ALC880_5ST_DIG }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xe401, .config = ALC880_5ST_DIG }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xe402, .config = ALC880_5ST_DIG }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xd400, .config = ALC880_5ST_DIG }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xd401, .config = ALC880_5ST_DIG }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xa100, .config = ALC880_5ST_DIG }, { .pci_subvendor = 0x1565, .pci_subdevice = 0x8202, .config = ALC880_5ST_DIG }, { .pci_subvendor = 0x1019, .pci_subdevice = 0xa880, .config = ALC880_5ST_DIG }, { .pci_subvendor = 0xa0a0, .pci_subdevice = 0x0560, .config = ALC880_5ST_DIG }, /* Aopen i915GMm-HFS */ /* { .pci_subvendor = 0x1019, .pci_subdevice = 0xa884, .config = ALC880_5ST_DIG }, */ /* conflict with 6stack */ { .pci_subvendor = 0x1695, .pci_subdevice = 0x400d, .config = ALC880_5ST_DIG }, /* note subvendor = 0 below */ /* { .pci_subvendor = 0x0000, .pci_subdevice = 0x8086, .config = ALC880_5ST_DIG }, */ { .modelname = "w810", .config = ALC880_W810 }, { .pci_subvendor = 0x161f, .pci_subdevice = 0x203d, .config = ALC880_W810 }, { .modelname = "z71v", .config = ALC880_Z71V }, { .pci_subvendor = 0x1043, .pci_subdevice = 0x1964, .config = ALC880_Z71V }, { .modelname = "6stack", .config = ALC880_6ST }, { .pci_subvendor = 0x1043, .pci_subdevice = 0x8196, .config = ALC880_6ST }, /* ASUS P5GD1-HVM */ { .pci_subvendor = 0x1043, .pci_subdevice = 0x81b4, .config = ALC880_6ST }, { .pci_subvendor = 0x1019, .pci_subdevice = 0xa884, .config = ALC880_6ST }, /* Acer APFV */ { .pci_subvendor = 0x1458, .pci_subdevice = 0xa102, .config = ALC880_6ST }, /* Gigabyte K8N51 */ { .modelname = "6stack-digout", .config = ALC880_6ST_DIG }, { .pci_subvendor = 0x2668, .pci_subdevice = 0x8086, .config = ALC880_6ST_DIG }, { .pci_subvendor = 0x8086, .pci_subdevice = 0x2668, .config = ALC880_6ST_DIG }, { .pci_subvendor = 0x1462, .pci_subdevice = 0x1150, .config = ALC880_6ST_DIG }, { .pci_subvendor = 0xe803, .pci_subdevice = 0x1019, .config = ALC880_6ST_DIG }, { .pci_subvendor = 0x1039, .pci_subdevice = 0x1234, .config = ALC880_6ST_DIG }, { .pci_subvendor = 0x1025, .pci_subdevice = 0x0077, .config = ALC880_6ST_DIG }, { .pci_subvendor = 0x1025, .pci_subdevice = 0x0078, .config = ALC880_6ST_DIG }, { .pci_subvendor = 0x1025, .pci_subdevice = 0x0087, .config = ALC880_6ST_DIG }, { .pci_subvendor = 0x1297, .pci_subdevice = 0xc790, .config = ALC880_6ST_DIG }, /* Shuttle ST20G5 */ { .pci_subvendor = 0x1509, .pci_subdevice = 0x925d, .config = ALC880_6ST_DIG }, /* FIC P4M-915GD1 */ { .pci_subvendor = 0x1695, .pci_subdevice = 0x4012, .config = ALC880_5ST_DIG }, /* Epox EP-5LDA+ GLi */ { .modelname = "asus", .config = ALC880_ASUS }, { .pci_subvendor = 0x1043, .pci_subdevice = 0x1964, .config = ALC880_ASUS_DIG }, { .pci_subvendor = 0x1043, .pci_subdevice = 0x1973, .config = ALC880_ASUS_DIG }, { .pci_subvendor = 0x1043, .pci_subdevice = 0x19b3, .config = ALC880_ASUS_DIG }, { .pci_subvendor = 0x1043, .pci_subdevice = 0x1113, .config = ALC880_ASUS_DIG }, { .pci_subvendor = 0x1043, .pci_subdevice = 0x1173, .config = ALC880_ASUS_DIG }, { .pci_subvendor = 0x1043, .pci_subdevice = 0x1993, .config = ALC880_ASUS }, { .pci_subvendor = 0x1043, .pci_subdevice = 0x10c3, .config = ALC880_ASUS_DIG }, { .pci_subvendor = 0x1043, .pci_subdevice = 0x1133, .config = ALC880_ASUS }, { .pci_subvendor = 0x1043, .pci_subdevice = 0x1123, .config = ALC880_ASUS_DIG }, { .pci_subvendor = 0x1043, .pci_subdevice = 0x1143, .config = ALC880_ASUS }, { .modelname = "asus-w1v", .config = ALC880_ASUS_W1V }, { .pci_subvendor = 0x1043, .pci_subdevice = 0x10b3, .config = ALC880_ASUS_W1V }, { .modelname = "asus-dig", .config = ALC880_ASUS_DIG }, { .pci_subvendor = 0x1043, .pci_subdevice = 0x8181, .config = ALC880_ASUS_DIG }, /* ASUS P4GPL-X */ { .modelname = "asus-dig2", .config = ALC880_ASUS_DIG2 }, { .pci_subvendor = 0x1558, .pci_subdevice = 0x5401, .config = ALC880_ASUS_DIG2 }, { .modelname = "uniwill", .config = ALC880_UNIWILL_DIG }, { .pci_subvendor = 0x1584, .pci_subdevice = 0x9050, .config = ALC880_UNIWILL_DIG }, { .modelname = "F1734", .config = ALC880_F1734 }, { .pci_subvendor = 0x1734, .pci_subdevice = 0x107c, .config = ALC880_F1734 }, { .pci_subvendor = 0x1584, .pci_subdevice = 0x9054, .config = ALC880_F1734 }, { .modelname = "lg", .config = ALC880_LG }, { .pci_subvendor = 0x1854, .pci_subdevice = 0x003b, .config = ALC880_LG }, { .pci_subvendor = 0x1854, .pci_subdevice = 0x0068, .config = ALC880_LG }, { .modelname = "lg-lw", .config = ALC880_LG_LW }, { .pci_subvendor = 0x1854, .pci_subdevice = 0x0018, .config = ALC880_LG_LW }, #ifdef CONFIG_SND_DEBUG { .modelname = "test", .config = ALC880_TEST }, #endif { .modelname = "auto", .config = ALC880_AUTO }, {} }; /* * ALC880 codec presets */ static struct alc_config_preset alc880_presets[] = { [ALC880_3ST] = { .mixers = { alc880_three_stack_mixer }, .init_verbs = { alc880_volume_init_verbs, alc880_pin_3stack_init_verbs }, .num_dacs = ARRAY_SIZE(alc880_dac_nids), .dac_nids = alc880_dac_nids, .num_channel_mode = ARRAY_SIZE(alc880_threestack_modes), .channel_mode = alc880_threestack_modes, .need_dac_fix = 1, .input_mux = &alc880_capture_source, }, [ALC880_3ST_DIG] = { .mixers = { alc880_three_stack_mixer }, .init_verbs = { alc880_volume_init_verbs, alc880_pin_3stack_init_verbs }, .num_dacs = ARRAY_SIZE(alc880_dac_nids), .dac_nids = alc880_dac_nids, .dig_out_nid = ALC880_DIGOUT_NID, .num_channel_mode = ARRAY_SIZE(alc880_threestack_modes), .channel_mode = alc880_threestack_modes, .need_dac_fix = 1, .input_mux = &alc880_capture_source, }, [ALC880_TCL_S700] = { .mixers = { alc880_tcl_s700_mixer }, .init_verbs = { alc880_volume_init_verbs, alc880_pin_tcl_S700_init_verbs, alc880_gpio2_init_verbs }, .num_dacs = ARRAY_SIZE(alc880_dac_nids), .dac_nids = alc880_dac_nids, .hp_nid = 0x03, .num_channel_mode = ARRAY_SIZE(alc880_2_jack_modes), .channel_mode = alc880_2_jack_modes, .input_mux = &alc880_capture_source, }, [ALC880_5ST] = { .mixers = { alc880_three_stack_mixer, alc880_five_stack_mixer}, .init_verbs = { alc880_volume_init_verbs, alc880_pin_5stack_init_verbs }, .num_dacs = ARRAY_SIZE(alc880_dac_nids), .dac_nids = alc880_dac_nids, .num_channel_mode = ARRAY_SIZE(alc880_fivestack_modes), .channel_mode = alc880_fivestack_modes, .input_mux = &alc880_capture_source, }, [ALC880_5ST_DIG] = { .mixers = { alc880_three_stack_mixer, alc880_five_stack_mixer }, .init_verbs = { alc880_volume_init_verbs, alc880_pin_5stack_init_verbs }, .num_dacs = ARRAY_SIZE(alc880_dac_nids), .dac_nids = alc880_dac_nids, .dig_out_nid = ALC880_DIGOUT_NID, .num_channel_mode = ARRAY_SIZE(alc880_fivestack_modes), .channel_mode = alc880_fivestack_modes, .input_mux = &alc880_capture_source, }, [ALC880_6ST] = { .mixers = { alc880_six_stack_mixer }, .init_verbs = { alc880_volume_init_verbs, alc880_pin_6stack_init_verbs }, .num_dacs = ARRAY_SIZE(alc880_6st_dac_nids), .dac_nids = alc880_6st_dac_nids, .num_channel_mode = ARRAY_SIZE(alc880_sixstack_modes), .channel_mode = alc880_sixstack_modes, .input_mux = &alc880_6stack_capture_source, }, [ALC880_6ST_DIG] = { .mixers = { alc880_six_stack_mixer }, .init_verbs = { alc880_volume_init_verbs, alc880_pin_6stack_init_verbs }, .num_dacs = ARRAY_SIZE(alc880_6st_dac_nids), .dac_nids = alc880_6st_dac_nids, .dig_out_nid = ALC880_DIGOUT_NID, .num_channel_mode = ARRAY_SIZE(alc880_sixstack_modes), .channel_mode = alc880_sixstack_modes, .input_mux = &alc880_6stack_capture_source, }, [ALC880_W810] = { .mixers = { alc880_w810_base_mixer }, .init_verbs = { alc880_volume_init_verbs, alc880_pin_w810_init_verbs, alc880_gpio2_init_verbs }, .num_dacs = ARRAY_SIZE(alc880_w810_dac_nids), .dac_nids = alc880_w810_dac_nids, .dig_out_nid = ALC880_DIGOUT_NID, .num_channel_mode = ARRAY_SIZE(alc880_w810_modes), .channel_mode = alc880_w810_modes, .input_mux = &alc880_capture_source, }, [ALC880_Z71V] = { .mixers = { alc880_z71v_mixer }, .init_verbs = { alc880_volume_init_verbs, alc880_pin_z71v_init_verbs }, .num_dacs = ARRAY_SIZE(alc880_z71v_dac_nids), .dac_nids = alc880_z71v_dac_nids, .dig_out_nid = ALC880_DIGOUT_NID, .hp_nid = 0x03, .num_channel_mode = ARRAY_SIZE(alc880_2_jack_modes), .channel_mode = alc880_2_jack_modes, .input_mux = &alc880_capture_source, }, [ALC880_F1734] = { .mixers = { alc880_f1734_mixer }, .init_verbs = { alc880_volume_init_verbs, alc880_pin_f1734_init_verbs }, .num_dacs = ARRAY_SIZE(alc880_f1734_dac_nids), .dac_nids = alc880_f1734_dac_nids, .hp_nid = 0x02, .num_channel_mode = ARRAY_SIZE(alc880_2_jack_modes), .channel_mode = alc880_2_jack_modes, .input_mux = &alc880_capture_source, }, [ALC880_ASUS] = { .mixers = { alc880_asus_mixer }, .init_verbs = { alc880_volume_init_verbs, alc880_pin_asus_init_verbs, alc880_gpio1_init_verbs }, .num_dacs = ARRAY_SIZE(alc880_asus_dac_nids), .dac_nids = alc880_asus_dac_nids, .num_channel_mode = ARRAY_SIZE(alc880_asus_modes), .channel_mode = alc880_asus_modes, .need_dac_fix = 1, .input_mux = &alc880_capture_source, }, [ALC880_ASUS_DIG] = { .mixers = { alc880_asus_mixer }, .init_verbs = { alc880_volume_init_verbs, alc880_pin_asus_init_verbs, alc880_gpio1_init_verbs }, .num_dacs = ARRAY_SIZE(alc880_asus_dac_nids), .dac_nids = alc880_asus_dac_nids, .dig_out_nid = ALC880_DIGOUT_NID, .num_channel_mode = ARRAY_SIZE(alc880_asus_modes), .channel_mode = alc880_asus_modes, .need_dac_fix = 1, .input_mux = &alc880_capture_source, }, [ALC880_ASUS_DIG2] = { .mixers = { alc880_asus_mixer }, .init_verbs = { alc880_volume_init_verbs, alc880_pin_asus_init_verbs, alc880_gpio2_init_verbs }, /* use GPIO2 */ .num_dacs = ARRAY_SIZE(alc880_asus_dac_nids), .dac_nids = alc880_asus_dac_nids, .dig_out_nid = ALC880_DIGOUT_NID, .num_channel_mode = ARRAY_SIZE(alc880_asus_modes), .channel_mode = alc880_asus_modes, .need_dac_fix = 1, .input_mux = &alc880_capture_source, }, [ALC880_ASUS_W1V] = { .mixers = { alc880_asus_mixer, alc880_asus_w1v_mixer }, .init_verbs = { alc880_volume_init_verbs, alc880_pin_asus_init_verbs, alc880_gpio1_init_verbs }, .num_dacs = ARRAY_SIZE(alc880_asus_dac_nids), .dac_nids = alc880_asus_dac_nids, .dig_out_nid = ALC880_DIGOUT_NID, .num_channel_mode = ARRAY_SIZE(alc880_asus_modes), .channel_mode = alc880_asus_modes, .need_dac_fix = 1, .input_mux = &alc880_capture_source, }, [ALC880_UNIWILL_DIG] = { .mixers = { alc880_asus_mixer, alc880_pcbeep_mixer }, .init_verbs = { alc880_volume_init_verbs, alc880_pin_asus_init_verbs }, .num_dacs = ARRAY_SIZE(alc880_asus_dac_nids), .dac_nids = alc880_asus_dac_nids, .dig_out_nid = ALC880_DIGOUT_NID, .num_channel_mode = ARRAY_SIZE(alc880_asus_modes), .channel_mode = alc880_asus_modes, .need_dac_fix = 1, .input_mux = &alc880_capture_source, }, [ALC880_CLEVO] = { .mixers = { alc880_three_stack_mixer }, .init_verbs = { alc880_volume_init_verbs, alc880_pin_clevo_init_verbs }, .num_dacs = ARRAY_SIZE(alc880_dac_nids), .dac_nids = alc880_dac_nids, .hp_nid = 0x03, .num_channel_mode = ARRAY_SIZE(alc880_threestack_modes), .channel_mode = alc880_threestack_modes, .need_dac_fix = 1, .input_mux = &alc880_capture_source, }, [ALC880_LG] = { .mixers = { alc880_lg_mixer }, .init_verbs = { alc880_volume_init_verbs, alc880_lg_init_verbs }, .num_dacs = ARRAY_SIZE(alc880_lg_dac_nids), .dac_nids = alc880_lg_dac_nids, .dig_out_nid = ALC880_DIGOUT_NID, .num_channel_mode = ARRAY_SIZE(alc880_lg_ch_modes), .channel_mode = alc880_lg_ch_modes, .need_dac_fix = 1, .input_mux = &alc880_lg_capture_source, .unsol_event = alc880_lg_unsol_event, .init_hook = alc880_lg_automute, }, [ALC880_LG_LW] = { .mixers = { alc880_lg_lw_mixer }, .init_verbs = { alc880_volume_init_verbs, alc880_lg_lw_init_verbs }, .num_dacs = 1, .dac_nids = alc880_dac_nids, .dig_out_nid = ALC880_DIGOUT_NID, .num_channel_mode = ARRAY_SIZE(alc880_2_jack_modes), .channel_mode = alc880_2_jack_modes, .input_mux = &alc880_lg_lw_capture_source, .unsol_event = alc880_lg_lw_unsol_event, .init_hook = alc880_lg_lw_automute, }, #ifdef CONFIG_SND_DEBUG [ALC880_TEST] = { .mixers = { alc880_test_mixer }, .init_verbs = { alc880_test_init_verbs }, .num_dacs = ARRAY_SIZE(alc880_test_dac_nids), .dac_nids = alc880_test_dac_nids, .dig_out_nid = ALC880_DIGOUT_NID, .num_channel_mode = ARRAY_SIZE(alc880_test_modes), .channel_mode = alc880_test_modes, .input_mux = &alc880_test_capture_source, }, #endif }; /* * Automatic parse of I/O pins from the BIOS configuration */ #define NUM_CONTROL_ALLOC 32 #define NUM_VERB_ALLOC 32 enum { ALC_CTL_WIDGET_VOL, ALC_CTL_WIDGET_MUTE, ALC_CTL_BIND_MUTE, }; static struct snd_kcontrol_new alc880_control_templates[] = { HDA_CODEC_VOLUME(NULL, 0, 0, 0), HDA_CODEC_MUTE(NULL, 0, 0, 0), HDA_BIND_MUTE(NULL, 0, 0, 0), }; /* add dynamic controls */ static int add_control(struct alc_spec *spec, int type, const char *name, unsigned long val) { struct snd_kcontrol_new *knew; if (spec->num_kctl_used >= spec->num_kctl_alloc) { int num = spec->num_kctl_alloc + NUM_CONTROL_ALLOC; knew = kcalloc(num + 1, sizeof(*knew), GFP_KERNEL); /* array + terminator */ if (! knew) return -ENOMEM; if (spec->kctl_alloc) { memcpy(knew, spec->kctl_alloc, sizeof(*knew) * spec->num_kctl_alloc); kfree(spec->kctl_alloc); } spec->kctl_alloc = knew; spec->num_kctl_alloc = num; } knew = &spec->kctl_alloc[spec->num_kctl_used]; *knew = alc880_control_templates[type]; knew->name = kstrdup(name, GFP_KERNEL); if (! knew->name) return -ENOMEM; knew->private_value = val; spec->num_kctl_used++; return 0; } #define alc880_is_fixed_pin(nid) ((nid) >= 0x14 && (nid) <= 0x17) #define alc880_fixed_pin_idx(nid) ((nid) - 0x14) #define alc880_is_multi_pin(nid) ((nid) >= 0x18) #define alc880_multi_pin_idx(nid) ((nid) - 0x18) #define alc880_is_input_pin(nid) ((nid) >= 0x18) #define alc880_input_pin_idx(nid) ((nid) - 0x18) #define alc880_idx_to_dac(nid) ((nid) + 0x02) #define alc880_dac_to_idx(nid) ((nid) - 0x02) #define alc880_idx_to_mixer(nid) ((nid) + 0x0c) #define alc880_idx_to_selector(nid) ((nid) + 0x10) #define ALC880_PIN_CD_NID 0x1c /* fill in the dac_nids table from the parsed pin configuration */ static int alc880_auto_fill_dac_nids(struct alc_spec *spec, const struct auto_pin_cfg *cfg) { hda_nid_t nid; int assigned[4]; int i, j; memset(assigned, 0, sizeof(assigned)); spec->multiout.dac_nids = spec->private_dac_nids; /* check the pins hardwired to audio widget */ for (i = 0; i < cfg->line_outs; i++) { nid = cfg->line_out_pins[i]; if (alc880_is_fixed_pin(nid)) { int idx = alc880_fixed_pin_idx(nid); spec->multiout.dac_nids[i] = alc880_idx_to_dac(idx); assigned[idx] = 1; } } /* left pins can be connect to any audio widget */ for (i = 0; i < cfg->line_outs; i++) { nid = cfg->line_out_pins[i]; if (alc880_is_fixed_pin(nid)) continue; /* search for an empty channel */ for (j = 0; j < cfg->line_outs; j++) { if (! assigned[j]) { spec->multiout.dac_nids[i] = alc880_idx_to_dac(j); assigned[j] = 1; break; } } } spec->multiout.num_dacs = cfg->line_outs; return 0; } /* add playback controls from the parsed DAC table */ static int alc880_auto_create_multi_out_ctls(struct alc_spec *spec, const struct auto_pin_cfg *cfg) { char name[32]; static const char *chname[4] = { "Front", "Surround", NULL /*CLFE*/, "Side" }; hda_nid_t nid; int i, err; for (i = 0; i < cfg->line_outs; i++) { if (! spec->multiout.dac_nids[i]) continue; nid = alc880_idx_to_mixer(alc880_dac_to_idx(spec->multiout.dac_nids[i])); if (i == 2) { /* Center/LFE */ if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "Center Playback Volume", HDA_COMPOSE_AMP_VAL(nid, 1, 0, HDA_OUTPUT))) < 0) return err; if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "LFE Playback Volume", HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT))) < 0) return err; if ((err = add_control(spec, ALC_CTL_BIND_MUTE, "Center Playback Switch", HDA_COMPOSE_AMP_VAL(nid, 1, 2, HDA_INPUT))) < 0) return err; if ((err = add_control(spec, ALC_CTL_BIND_MUTE, "LFE Playback Switch", HDA_COMPOSE_AMP_VAL(nid, 2, 2, HDA_INPUT))) < 0) return err; } else { sprintf(name, "%s Playback Volume", chname[i]); if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, name, HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0) return err; sprintf(name, "%s Playback Switch", chname[i]); if ((err = add_control(spec, ALC_CTL_BIND_MUTE, name, HDA_COMPOSE_AMP_VAL(nid, 3, 2, HDA_INPUT))) < 0) return err; } } return 0; } /* add playback controls for speaker and HP outputs */ static int alc880_auto_create_extra_out(struct alc_spec *spec, hda_nid_t pin, const char *pfx) { hda_nid_t nid; int err; char name[32]; if (! pin) return 0; if (alc880_is_fixed_pin(pin)) { nid = alc880_idx_to_dac(alc880_fixed_pin_idx(pin)); /* specify the DAC as the extra output */ if (! spec->multiout.hp_nid) spec->multiout.hp_nid = nid; else spec->multiout.extra_out_nid[0] = nid; /* control HP volume/switch on the output mixer amp */ nid = alc880_idx_to_mixer(alc880_fixed_pin_idx(pin)); sprintf(name, "%s Playback Volume", pfx); if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, name, HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0) return err; sprintf(name, "%s Playback Switch", pfx); if ((err = add_control(spec, ALC_CTL_BIND_MUTE, name, HDA_COMPOSE_AMP_VAL(nid, 3, 2, HDA_INPUT))) < 0) return err; } else if (alc880_is_multi_pin(pin)) { /* set manual connection */ /* we have only a switch on HP-out PIN */ sprintf(name, "%s Playback Switch", pfx); if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, name, HDA_COMPOSE_AMP_VAL(pin, 3, 0, HDA_OUTPUT))) < 0) return err; } return 0; } /* create input playback/capture controls for the given pin */ static int new_analog_input(struct alc_spec *spec, hda_nid_t pin, const char *ctlname, int idx, hda_nid_t mix_nid) { char name[32]; int err; sprintf(name, "%s Playback Volume", ctlname); if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, name, HDA_COMPOSE_AMP_VAL(mix_nid, 3, idx, HDA_INPUT))) < 0) return err; sprintf(name, "%s Playback Switch", ctlname); if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, name, HDA_COMPOSE_AMP_VAL(mix_nid, 3, idx, HDA_INPUT))) < 0) return err; return 0; } /* create playback/capture controls for input pins */ static int alc880_auto_create_analog_input_ctls(struct alc_spec *spec, const struct auto_pin_cfg *cfg) { struct hda_input_mux *imux = &spec->private_imux; int i, err, idx; for (i = 0; i < AUTO_PIN_LAST; i++) { if (alc880_is_input_pin(cfg->input_pins[i])) { idx = alc880_input_pin_idx(cfg->input_pins[i]); err = new_analog_input(spec, cfg->input_pins[i], auto_pin_cfg_labels[i], idx, 0x0b); if (err < 0) return err; imux->items[imux->num_items].label = auto_pin_cfg_labels[i]; imux->items[imux->num_items].index = alc880_input_pin_idx(cfg->input_pins[i]); imux->num_items++; } } return 0; } static void alc880_auto_set_output_and_unmute(struct hda_codec *codec, hda_nid_t nid, int pin_type, int dac_idx) { /* set as output */ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, pin_type); snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE); /* need the manual connection? */ if (alc880_is_multi_pin(nid)) { struct alc_spec *spec = codec->spec; int idx = alc880_multi_pin_idx(nid); snd_hda_codec_write(codec, alc880_idx_to_selector(idx), 0, AC_VERB_SET_CONNECT_SEL, alc880_dac_to_idx(spec->multiout.dac_nids[dac_idx])); } } static void alc880_auto_init_multi_out(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; int i; for (i = 0; i < spec->autocfg.line_outs; i++) { hda_nid_t nid = spec->autocfg.line_out_pins[i]; alc880_auto_set_output_and_unmute(codec, nid, PIN_OUT, i); } } static void alc880_auto_init_extra_out(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; hda_nid_t pin; pin = spec->autocfg.speaker_pins[0]; if (pin) /* connect to front */ alc880_auto_set_output_and_unmute(codec, pin, PIN_OUT, 0); pin = spec->autocfg.hp_pin; if (pin) /* connect to front */ alc880_auto_set_output_and_unmute(codec, pin, PIN_HP, 0); } static void alc880_auto_init_analog_input(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; int i; for (i = 0; i < AUTO_PIN_LAST; i++) { hda_nid_t nid = spec->autocfg.input_pins[i]; if (alc880_is_input_pin(nid)) { snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, i <= AUTO_PIN_FRONT_MIC ? PIN_VREF80 : PIN_IN); if (nid != ALC880_PIN_CD_NID) snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE); } } } /* parse the BIOS configuration and set up the alc_spec */ /* return 1 if successful, 0 if the proper config is not found, or a negative error code */ static int alc880_parse_auto_config(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; int err; static hda_nid_t alc880_ignore[] = { 0x1d, 0 }; if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, alc880_ignore)) < 0) return err; if (! spec->autocfg.line_outs) return 0; /* can't find valid BIOS pin config */ if ((err = alc880_auto_fill_dac_nids(spec, &spec->autocfg)) < 0 || (err = alc880_auto_create_multi_out_ctls(spec, &spec->autocfg)) < 0 || (err = alc880_auto_create_extra_out(spec, spec->autocfg.speaker_pins[0], "Speaker")) < 0 || (err = alc880_auto_create_extra_out(spec, spec->autocfg.hp_pin, "Headphone")) < 0 || (err = alc880_auto_create_analog_input_ctls(spec, &spec->autocfg)) < 0) return err; spec->multiout.max_channels = spec->multiout.num_dacs * 2; if (spec->autocfg.dig_out_pin) spec->multiout.dig_out_nid = ALC880_DIGOUT_NID; if (spec->autocfg.dig_in_pin) spec->dig_in_nid = ALC880_DIGIN_NID; if (spec->kctl_alloc) spec->mixers[spec->num_mixers++] = spec->kctl_alloc; spec->init_verbs[spec->num_init_verbs++] = alc880_volume_init_verbs; spec->num_mux_defs = 1; spec->input_mux = &spec->private_imux; return 1; } /* additional initialization for auto-configuration model */ static void alc880_auto_init(struct hda_codec *codec) { alc880_auto_init_multi_out(codec); alc880_auto_init_extra_out(codec); alc880_auto_init_analog_input(codec); } /* * OK, here we have finally the patch for ALC880 */ static int patch_alc880(struct hda_codec *codec) { struct alc_spec *spec; int board_config; int err; spec = kzalloc(sizeof(*spec), GFP_KERNEL); if (spec == NULL) return -ENOMEM; codec->spec = spec; board_config = snd_hda_check_board_config(codec, alc880_cfg_tbl); if (board_config < 0 || board_config >= ALC880_MODEL_LAST) { printk(KERN_INFO "hda_codec: Unknown model for ALC880, " "trying auto-probe from BIOS...\n"); board_config = ALC880_AUTO; } if (board_config == ALC880_AUTO) { /* automatic parse from the BIOS config */ err = alc880_parse_auto_config(codec); if (err < 0) { alc_free(codec); return err; } else if (! err) { printk(KERN_INFO "hda_codec: Cannot set up configuration " "from BIOS. Using 3-stack mode...\n"); board_config = ALC880_3ST; } } if (board_config != ALC880_AUTO) setup_preset(spec, &alc880_presets[board_config]); spec->stream_name_analog = "ALC880 Analog"; spec->stream_analog_playback = &alc880_pcm_analog_playback; spec->stream_analog_capture = &alc880_pcm_analog_capture; spec->stream_name_digital = "ALC880 Digital"; spec->stream_digital_playback = &alc880_pcm_digital_playback; spec->stream_digital_capture = &alc880_pcm_digital_capture; if (! spec->adc_nids && spec->input_mux) { /* check whether NID 0x07 is valid */ unsigned int wcap = get_wcaps(codec, alc880_adc_nids[0]); wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT; /* get type */ if (wcap != AC_WID_AUD_IN) { spec->adc_nids = alc880_adc_nids_alt; spec->num_adc_nids = ARRAY_SIZE(alc880_adc_nids_alt); spec->mixers[spec->num_mixers] = alc880_capture_alt_mixer; spec->num_mixers++; } else { spec->adc_nids = alc880_adc_nids; spec->num_adc_nids = ARRAY_SIZE(alc880_adc_nids); spec->mixers[spec->num_mixers] = alc880_capture_mixer; spec->num_mixers++; } } codec->patch_ops = alc_patch_ops; if (board_config == ALC880_AUTO) spec->init_hook = alc880_auto_init; return 0; } /* * ALC260 support */ static hda_nid_t alc260_dac_nids[1] = { /* front */ 0x02, }; static hda_nid_t alc260_adc_nids[1] = { /* ADC0 */ 0x04, }; static hda_nid_t alc260_adc_nids_alt[1] = { /* ADC1 */ 0x05, }; static hda_nid_t alc260_hp_adc_nids[2] = { /* ADC1, 0 */ 0x05, 0x04 }; /* NIDs used when simultaneous access to both ADCs makes sense. Note that * alc260_capture_mixer assumes ADC0 (nid 0x04) is the first ADC. */ static hda_nid_t alc260_dual_adc_nids[2] = { /* ADC0, ADC1 */ 0x04, 0x05 }; #define ALC260_DIGOUT_NID 0x03 #define ALC260_DIGIN_NID 0x06 static struct hda_input_mux alc260_capture_source = { .num_items = 4, .items = { { "Mic", 0x0 }, { "Front Mic", 0x1 }, { "Line", 0x2 }, { "CD", 0x4 }, }, }; /* On Fujitsu S702x laptops capture only makes sense from Mic/LineIn jack, * headphone jack and the internal CD lines since these are the only pins at * which audio can appear. For flexibility, also allow the option of * recording the mixer output on the second ADC (ADC0 doesn't have a * connection to the mixer output). */ static struct hda_input_mux alc260_fujitsu_capture_sources[2] = { { .num_items = 3, .items = { { "Mic/Line", 0x0 }, { "CD", 0x4 }, { "Headphone", 0x2 }, }, }, { .num_items = 4, .items = { { "Mic/Line", 0x0 }, { "CD", 0x4 }, { "Headphone", 0x2 }, { "Mixer", 0x5 }, }, }, }; /* Acer TravelMate(/Extensa/Aspire) notebooks have similar configuration to * the Fujitsu S702x, but jacks are marked differently. */ static struct hda_input_mux alc260_acer_capture_sources[2] = { { .num_items = 4, .items = { { "Mic", 0x0 }, { "Line", 0x2 }, { "CD", 0x4 }, { "Headphone", 0x5 }, }, }, { .num_items = 5, .items = { { "Mic", 0x0 }, { "Line", 0x2 }, { "CD", 0x4 }, { "Headphone", 0x6 }, { "Mixer", 0x5 }, }, }, }; /* * This is just place-holder, so there's something for alc_build_pcms to look * at when it calculates the maximum number of channels. ALC260 has no mixer * element which allows changing the channel mode, so the verb list is * never used. */ static struct hda_channel_mode alc260_modes[1] = { { 2, NULL }, }; /* Mixer combinations * * basic: base_output + input + pc_beep + capture * HP: base_output + input + capture_alt * HP_3013: hp_3013 + input + capture * fujitsu: fujitsu + capture * acer: acer + capture */ static struct snd_kcontrol_new alc260_base_output_mixer[] = { HDA_CODEC_VOLUME("Front Playback Volume", 0x08, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Front Playback Switch", 0x08, 2, HDA_INPUT), HDA_CODEC_VOLUME("Headphone Playback Volume", 0x09, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Headphone Playback Switch", 0x09, 2, HDA_INPUT), HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT), HDA_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT), { } /* end */ }; static struct snd_kcontrol_new alc260_input_mixer[] = { HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT), HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT), HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT), HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x07, 0x01, HDA_INPUT), HDA_CODEC_MUTE("Front Mic Playback Switch", 0x07, 0x01, HDA_INPUT), { } /* end */ }; static struct snd_kcontrol_new alc260_pc_beep_mixer[] = { HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x07, 0x05, HDA_INPUT), HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x07, 0x05, HDA_INPUT), { } /* end */ }; static struct snd_kcontrol_new alc260_hp_3013_mixer[] = { HDA_CODEC_VOLUME("Front Playback Volume", 0x09, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Front Playback Switch", 0x10, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("Aux-In Playback Volume", 0x07, 0x06, HDA_INPUT), HDA_CODEC_MUTE("Aux-In Playback Switch", 0x07, 0x06, HDA_INPUT), HDA_CODEC_VOLUME("Headphone Playback Volume", 0x08, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME_MONO("iSpeaker Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE_MONO("iSpeaker Playback Switch", 0x11, 1, 0x0, HDA_OUTPUT), { } /* end */ }; /* Fujitsu S702x series laptops. ALC260 pin usage: Mic/Line jack = 0x12, * HP jack = 0x14, CD audio = 0x16, internal speaker = 0x10. */ static struct snd_kcontrol_new alc260_fujitsu_mixer[] = { HDA_CODEC_VOLUME("Headphone Playback Volume", 0x08, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Headphone Playback Switch", 0x08, 2, HDA_INPUT), ALC_PIN_MODE("Headphone Jack Mode", 0x14, ALC_PIN_DIR_INOUT), HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT), HDA_CODEC_VOLUME("Mic/Line Playback Volume", 0x07, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Mic/Line Playback Switch", 0x07, 0x0, HDA_INPUT), ALC_PIN_MODE("Mic/Line Jack Mode", 0x12, ALC_PIN_DIR_IN), HDA_CODEC_VOLUME("Beep Playback Volume", 0x07, 0x05, HDA_INPUT), HDA_CODEC_MUTE("Beep Playback Switch", 0x07, 0x05, HDA_INPUT), HDA_CODEC_VOLUME("Internal Speaker Playback Volume", 0x09, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Internal Speaker Playback Switch", 0x09, 2, HDA_INPUT), { } /* end */ }; /* Mixer for Acer TravelMate(/Extensa/Aspire) notebooks. Note that current * versions of the ALC260 don't act on requests to enable mic bias from NID * 0x0f (used to drive the headphone jack in these laptops). The ALC260 * datasheet doesn't mention this restriction. At this stage it's not clear * whether this behaviour is intentional or is a hardware bug in chip * revisions available in early 2006. Therefore for now allow the * "Headphone Jack Mode" control to span all choices, but if it turns out * that the lack of mic bias for this NID is intentional we could change the * mode from ALC_PIN_DIR_INOUT to ALC_PIN_DIR_INOUT_NOMICBIAS. * * In addition, Acer TravelMate(/Extensa/Aspire) notebooks in early 2006 * don't appear to make the mic bias available from the "line" jack, even * though the NID used for this jack (0x14) can supply it. The theory is * that perhaps Acer have included blocking capacitors between the ALC260 * and the output jack. If this turns out to be the case for all such * models the "Line Jack Mode" mode could be changed from ALC_PIN_DIR_INOUT * to ALC_PIN_DIR_INOUT_NOMICBIAS. */ static struct snd_kcontrol_new alc260_acer_mixer[] = { HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Master Playback Switch", 0x08, 2, HDA_INPUT), ALC_PIN_MODE("Headphone Jack Mode", 0x0f, ALC_PIN_DIR_INOUT), HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT), HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT), ALC_PIN_MODE("Mic Jack Mode", 0x12, ALC_PIN_DIR_IN), HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT), HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT), ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT), HDA_CODEC_VOLUME("Beep Playback Volume", 0x07, 0x05, HDA_INPUT), HDA_CODEC_MUTE("Beep Playback Switch", 0x07, 0x05, HDA_INPUT), { } /* end */ }; /* capture mixer elements */ static struct snd_kcontrol_new alc260_capture_mixer[] = { HDA_CODEC_VOLUME("Capture Volume", 0x04, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Capture Switch", 0x04, 0x0, HDA_INPUT), HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x05, 0x0, HDA_INPUT), HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x05, 0x0, HDA_INPUT), { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, /* The multiple "Capture Source" controls confuse alsamixer * So call somewhat different.. * FIXME: the controls appear in the "playback" view! */ /* .name = "Capture Source", */ .name = "Input Source", .count = 2, .info = alc_mux_enum_info, .get = alc_mux_enum_get, .put = alc_mux_enum_put, }, { } /* end */ }; static struct snd_kcontrol_new alc260_capture_alt_mixer[] = { HDA_CODEC_VOLUME("Capture Volume", 0x05, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Capture Switch", 0x05, 0x0, HDA_INPUT), { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, /* The multiple "Capture Source" controls confuse alsamixer * So call somewhat different.. * FIXME: the controls appear in the "playback" view! */ /* .name = "Capture Source", */ .name = "Input Source", .count = 1, .info = alc_mux_enum_info, .get = alc_mux_enum_get, .put = alc_mux_enum_put, }, { } /* end */ }; /* * initialization verbs */ static struct hda_verb alc260_init_verbs[] = { /* Line In pin widget for input */ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, /* CD pin widget for input */ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, /* Mic1 (rear panel) pin widget for input and vref at 80% */ {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, /* Mic2 (front panel) pin widget for input and vref at 80% */ {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, /* LINE-2 is used for line-out in rear */ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, /* select line-out */ {0x0e, AC_VERB_SET_CONNECT_SEL, 0x00}, /* LINE-OUT pin */ {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, /* enable HP */ {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, /* enable Mono */ {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, /* mute capture amp left and right */ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, /* set connection select to line in (default select for this ADC) */ {0x04, AC_VERB_SET_CONNECT_SEL, 0x02}, /* mute capture amp left and right */ {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, /* set connection select to line in (default select for this ADC) */ {0x05, AC_VERB_SET_CONNECT_SEL, 0x02}, /* set vol=0 Line-Out mixer amp left and right */ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, /* unmute pin widget amp left and right (no gain on this amp) */ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* set vol=0 HP mixer amp left and right */ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, /* unmute pin widget amp left and right (no gain on this amp) */ {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* set vol=0 Mono mixer amp left and right */ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, /* unmute pin widget amp left and right (no gain on this amp) */ {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* unmute LINE-2 out pin */ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & Line In 2 = 0x03 */ /* mute CD */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)}, /* mute Line In */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)}, /* mute Mic */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, /* Amp Indexes: DAC = 0x01 & mixer = 0x00 */ /* mute Front out path */ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mute Headphone out path */ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mute Mono out path */ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, { } }; #if 0 /* should be identical with alc260_init_verbs? */ static struct hda_verb alc260_hp_init_verbs[] = { /* Headphone and output */ {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0}, /* mono output */ {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, /* Mic1 (rear panel) pin widget for input and vref at 80% */ {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24}, /* Mic2 (front panel) pin widget for input and vref at 80% */ {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24}, /* Line In pin widget for input */ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20}, /* Line-2 pin widget for output */ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, /* CD pin widget for input */ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20}, /* unmute amp left and right */ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000}, /* set connection select to line in (default select for this ADC) */ {0x04, AC_VERB_SET_CONNECT_SEL, 0x02}, /* unmute Line-Out mixer amp left and right (volume = 0) */ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, /* mute pin widget amp left and right (no gain on this amp) */ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000}, /* unmute HP mixer amp left and right (volume = 0) */ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, /* mute pin widget amp left and right (no gain on this amp) */ {0x10, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000}, /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & Line In 2 = 0x03 */ /* unmute CD */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))}, /* unmute Line In */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))}, /* unmute Mic */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, /* Amp Indexes: DAC = 0x01 & mixer = 0x00 */ /* Unmute Front out path */ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, {0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))}, /* Unmute Headphone out path */ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, {0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))}, /* Unmute Mono out path */ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))}, { } }; #endif static struct hda_verb alc260_hp_3013_init_verbs[] = { /* Line out and output */ {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, /* mono output */ {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, /* Mic1 (rear panel) pin widget for input and vref at 80% */ {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24}, /* Mic2 (front panel) pin widget for input and vref at 80% */ {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24}, /* Line In pin widget for input */ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20}, /* Headphone pin widget for output */ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0}, /* CD pin widget for input */ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20}, /* unmute amp left and right */ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000}, /* set connection select to line in (default select for this ADC) */ {0x04, AC_VERB_SET_CONNECT_SEL, 0x02}, /* unmute Line-Out mixer amp left and right (volume = 0) */ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, /* mute pin widget amp left and right (no gain on this amp) */ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000}, /* unmute HP mixer amp left and right (volume = 0) */ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, /* mute pin widget amp left and right (no gain on this amp) */ {0x10, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000}, /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & Line In 2 = 0x03 */ /* unmute CD */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))}, /* unmute Line In */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))}, /* unmute Mic */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, /* Amp Indexes: DAC = 0x01 & mixer = 0x00 */ /* Unmute Front out path */ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, {0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))}, /* Unmute Headphone out path */ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, {0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))}, /* Unmute Mono out path */ {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))}, { } }; /* Initialisation sequence for ALC260 as configured in Fujitsu S702x * laptops. ALC260 pin usage: Mic/Line jack = 0x12, HP jack = 0x14, CD * audio = 0x16, internal speaker = 0x10. */ static struct hda_verb alc260_fujitsu_init_verbs[] = { /* Disable all GPIOs */ {0x01, AC_VERB_SET_GPIO_MASK, 0}, /* Internal speaker is connected to headphone pin */ {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, /* Headphone/Line-out jack connects to Line1 pin; make it an output */ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, /* Mic/Line-in jack is connected to mic1 pin, so make it an input */ {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, /* Ensure all other unused pins are disabled and muted. */ {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* Disable digital (SPDIF) pins */ {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0}, {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0}, /* Ensure Line1 pin widget takes its input from the OUT1 sum bus * when acting as an output. */ {0x0d, AC_VERB_SET_CONNECT_SEL, 0}, /* Start with output sum widgets muted and their output gains at min */ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, /* Unmute HP pin widget amp left and right (no equiv mixer ctrl) */ {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Unmute Line1 pin widget output buffer since it starts as an output. * If the pin mode is changed by the user the pin mode control will * take care of enabling the pin's input/output buffers as needed. * Therefore there's no need to enable the input buffer at this * stage. */ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Unmute input buffer of pin widget used for Line-in (no equiv * mixer ctrl) */ {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, /* Mute capture amp left and right */ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* Set ADC connection select to match default mixer setting - line * in (on mic1 pin) */ {0x04, AC_VERB_SET_CONNECT_SEL, 0x00}, /* Do the same for the second ADC: mute capture input amp and * set ADC connection to line in (on mic1 pin) */ {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x05, AC_VERB_SET_CONNECT_SEL, 0x00}, /* Mute all inputs to mixer widget (even unconnected ones) */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */ { } }; /* Initialisation sequence for ALC260 as configured in Acer TravelMate and * similar laptops (adapted from Fujitsu init verbs). */ static struct hda_verb alc260_acer_init_verbs[] = { /* On TravelMate laptops, GPIO 0 enables the internal speaker and * the headphone jack. Turn this on and rely on the standard mute * methods whenever the user wants to turn these outputs off. */ {0x01, AC_VERB_SET_GPIO_MASK, 0x01}, {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01}, {0x01, AC_VERB_SET_GPIO_DATA, 0x01}, /* Internal speaker/Headphone jack is connected to Line-out pin */ {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, /* Internal microphone/Mic jack is connected to Mic1 pin */ {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50}, /* Line In jack is connected to Line1 pin */ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, /* Ensure all other unused pins are disabled and muted. */ {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* Disable digital (SPDIF) pins */ {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0}, {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0}, /* Ensure Mic1 and Line1 pin widgets take input from the OUT1 sum * bus when acting as outputs. */ {0x0b, AC_VERB_SET_CONNECT_SEL, 0}, {0x0d, AC_VERB_SET_CONNECT_SEL, 0}, /* Start with output sum widgets muted and their output gains at min */ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, /* Unmute Line-out pin widget amp left and right (no equiv mixer ctrl) */ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Unmute Mic1 and Line1 pin widget input buffers since they start as * inputs. If the pin mode is changed by the user the pin mode control * will take care of enabling the pin's input/output buffers as needed. * Therefore there's no need to enable the input buffer at this * stage. */ {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, /* Mute capture amp left and right */ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* Set ADC connection select to match default mixer setting - mic * (on mic1 pin) */ {0x04, AC_VERB_SET_CONNECT_SEL, 0x00}, /* Do similar with the second ADC: mute capture input amp and * set ADC connection to mic to match ALSA's default state. */ {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x05, AC_VERB_SET_CONNECT_SEL, 0x00}, /* Mute all inputs to mixer widget (even unconnected ones) */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */ { } }; /* Test configuration for debugging, modelled after the ALC880 test * configuration. */ #ifdef CONFIG_SND_DEBUG static hda_nid_t alc260_test_dac_nids[1] = { 0x02, }; static hda_nid_t alc260_test_adc_nids[2] = { 0x04, 0x05, }; /* For testing the ALC260, each input MUX needs its own definition since * the signal assignments are different. This assumes that the first ADC * is NID 0x04. */ static struct hda_input_mux alc260_test_capture_sources[2] = { { .num_items = 7, .items = { { "MIC1 pin", 0x0 }, { "MIC2 pin", 0x1 }, { "LINE1 pin", 0x2 }, { "LINE2 pin", 0x3 }, { "CD pin", 0x4 }, { "LINE-OUT pin", 0x5 }, { "HP-OUT pin", 0x6 }, }, }, { .num_items = 8, .items = { { "MIC1 pin", 0x0 }, { "MIC2 pin", 0x1 }, { "LINE1 pin", 0x2 }, { "LINE2 pin", 0x3 }, { "CD pin", 0x4 }, { "Mixer", 0x5 }, { "LINE-OUT pin", 0x6 }, { "HP-OUT pin", 0x7 }, }, }, }; static struct snd_kcontrol_new alc260_test_mixer[] = { /* Output driver widgets */ HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT), HDA_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT), HDA_CODEC_VOLUME("LOUT2 Playback Volume", 0x09, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("LOUT2 Playback Switch", 0x09, 2, HDA_INPUT), HDA_CODEC_VOLUME("LOUT1 Playback Volume", 0x08, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("LOUT1 Playback Switch", 0x08, 2, HDA_INPUT), /* Modes for retasking pin widgets * Note: the ALC260 doesn't seem to act on requests to enable mic * bias from NIDs 0x0f and 0x10. The ALC260 datasheet doesn't * mention this restriction. At this stage it's not clear whether * this behaviour is intentional or is a hardware bug in chip * revisions available at least up until early 2006. Therefore for * now allow the "HP-OUT" and "LINE-OUT" Mode controls to span all * choices, but if it turns out that the lack of mic bias for these * NIDs is intentional we could change their modes from * ALC_PIN_DIR_INOUT to ALC_PIN_DIR_INOUT_NOMICBIAS. */ ALC_PIN_MODE("HP-OUT pin mode", 0x10, ALC_PIN_DIR_INOUT), ALC_PIN_MODE("LINE-OUT pin mode", 0x0f, ALC_PIN_DIR_INOUT), ALC_PIN_MODE("LINE2 pin mode", 0x15, ALC_PIN_DIR_INOUT), ALC_PIN_MODE("LINE1 pin mode", 0x14, ALC_PIN_DIR_INOUT), ALC_PIN_MODE("MIC2 pin mode", 0x13, ALC_PIN_DIR_INOUT), ALC_PIN_MODE("MIC1 pin mode", 0x12, ALC_PIN_DIR_INOUT), /* Loopback mixer controls */ HDA_CODEC_VOLUME("MIC1 Playback Volume", 0x07, 0x00, HDA_INPUT), HDA_CODEC_MUTE("MIC1 Playback Switch", 0x07, 0x00, HDA_INPUT), HDA_CODEC_VOLUME("MIC2 Playback Volume", 0x07, 0x01, HDA_INPUT), HDA_CODEC_MUTE("MIC2 Playback Switch", 0x07, 0x01, HDA_INPUT), HDA_CODEC_VOLUME("LINE1 Playback Volume", 0x07, 0x02, HDA_INPUT), HDA_CODEC_MUTE("LINE1 Playback Switch", 0x07, 0x02, HDA_INPUT), HDA_CODEC_VOLUME("LINE2 Playback Volume", 0x07, 0x03, HDA_INPUT), HDA_CODEC_MUTE("LINE2 Playback Switch", 0x07, 0x03, HDA_INPUT), HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT), HDA_CODEC_VOLUME("Beep Playback Volume", 0x07, 0x05, HDA_INPUT), HDA_CODEC_MUTE("Beep Playback Switch", 0x07, 0x05, HDA_INPUT), HDA_CODEC_VOLUME("LINE-OUT loopback Playback Volume", 0x07, 0x06, HDA_INPUT), HDA_CODEC_MUTE("LINE-OUT loopback Playback Switch", 0x07, 0x06, HDA_INPUT), HDA_CODEC_VOLUME("HP-OUT loopback Playback Volume", 0x07, 0x7, HDA_INPUT), HDA_CODEC_MUTE("HP-OUT loopback Playback Switch", 0x07, 0x7, HDA_INPUT), /* Controls for GPIO pins, assuming they are configured as outputs */ ALC_GPIO_DATA_SWITCH("GPIO pin 0", 0x01, 0x01), ALC_GPIO_DATA_SWITCH("GPIO pin 1", 0x01, 0x02), ALC_GPIO_DATA_SWITCH("GPIO pin 2", 0x01, 0x04), ALC_GPIO_DATA_SWITCH("GPIO pin 3", 0x01, 0x08), /* Switches to allow the digital IO pins to be enabled. The datasheet * is ambigious as to which NID is which; testing on laptops which * make this output available should provide clarification. */ ALC_SPDIF_CTRL_SWITCH("SPDIF Playback Switch", 0x03, 0x01), ALC_SPDIF_CTRL_SWITCH("SPDIF Capture Switch", 0x06, 0x01), { } /* end */ }; static struct hda_verb alc260_test_init_verbs[] = { /* Enable all GPIOs as outputs with an initial value of 0 */ {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x0f}, {0x01, AC_VERB_SET_GPIO_DATA, 0x00}, {0x01, AC_VERB_SET_GPIO_MASK, 0x0f}, /* Enable retasking pins as output, initially without power amp */ {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, /* Disable digital (SPDIF) pins initially, but users can enable * them via a mixer switch. In the case of SPDIF-out, this initverb * payload also sets the generation to 0, output to be in "consumer" * PCM format, copyright asserted, no pre-emphasis and no validity * control. */ {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0}, {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0}, /* Ensure mic1, mic2, line1 and line2 pin widgets take input from the * OUT1 sum bus when acting as an output. */ {0x0b, AC_VERB_SET_CONNECT_SEL, 0}, {0x0c, AC_VERB_SET_CONNECT_SEL, 0}, {0x0d, AC_VERB_SET_CONNECT_SEL, 0}, {0x0e, AC_VERB_SET_CONNECT_SEL, 0}, /* Start with output sum widgets muted and their output gains at min */ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, /* Unmute retasking pin widget output buffers since the default * state appears to be output. As the pin mode is changed by the * user the pin mode control will take care of enabling the pin's * input/output buffers as needed. */ {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Also unmute the mono-out pin widget */ {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Mute capture amp left and right */ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* Set ADC connection select to match default mixer setting (mic1 * pin) */ {0x04, AC_VERB_SET_CONNECT_SEL, 0x00}, /* Do the same for the second ADC: mute capture input amp and * set ADC connection to mic1 pin */ {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x05, AC_VERB_SET_CONNECT_SEL, 0x00}, /* Mute all inputs to mixer widget (even unconnected ones) */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */ { } }; #endif static struct hda_pcm_stream alc260_pcm_analog_playback = { .substreams = 1, .channels_min = 2, .channels_max = 2, }; static struct hda_pcm_stream alc260_pcm_analog_capture = { .substreams = 1, .channels_min = 2, .channels_max = 2, }; #define alc260_pcm_digital_playback alc880_pcm_digital_playback #define alc260_pcm_digital_capture alc880_pcm_digital_capture /* * for BIOS auto-configuration */ static int alc260_add_playback_controls(struct alc_spec *spec, hda_nid_t nid, const char *pfx) { hda_nid_t nid_vol; unsigned long vol_val, sw_val; char name[32]; int err; if (nid >= 0x0f && nid < 0x11) { nid_vol = nid - 0x7; vol_val = HDA_COMPOSE_AMP_VAL(nid_vol, 3, 0, HDA_OUTPUT); sw_val = HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT); } else if (nid == 0x11) { nid_vol = nid - 0x7; vol_val = HDA_COMPOSE_AMP_VAL(nid_vol, 2, 0, HDA_OUTPUT); sw_val = HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT); } else if (nid >= 0x12 && nid <= 0x15) { nid_vol = 0x08; vol_val = HDA_COMPOSE_AMP_VAL(nid_vol, 3, 0, HDA_OUTPUT); sw_val = HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT); } else return 0; /* N/A */ snprintf(name, sizeof(name), "%s Playback Volume", pfx); if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, name, vol_val)) < 0) return err; snprintf(name, sizeof(name), "%s Playback Switch", pfx); if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, name, sw_val)) < 0) return err; return 1; } /* add playback controls from the parsed DAC table */ static int alc260_auto_create_multi_out_ctls(struct alc_spec *spec, const struct auto_pin_cfg *cfg) { hda_nid_t nid; int err; spec->multiout.num_dacs = 1; spec->multiout.dac_nids = spec->private_dac_nids; spec->multiout.dac_nids[0] = 0x02; nid = cfg->line_out_pins[0]; if (nid) { err = alc260_add_playback_controls(spec, nid, "Front"); if (err < 0) return err; } nid = cfg->speaker_pins[0]; if (nid) { err = alc260_add_playback_controls(spec, nid, "Speaker"); if (err < 0) return err; } nid = cfg->hp_pin; if (nid) { err = alc260_add_playback_controls(spec, nid, "Headphone"); if (err < 0) return err; } return 0; } /* create playback/capture controls for input pins */ static int alc260_auto_create_analog_input_ctls(struct alc_spec *spec, const struct auto_pin_cfg *cfg) { struct hda_input_mux *imux = &spec->private_imux; int i, err, idx; for (i = 0; i < AUTO_PIN_LAST; i++) { if (cfg->input_pins[i] >= 0x12) { idx = cfg->input_pins[i] - 0x12; err = new_analog_input(spec, cfg->input_pins[i], auto_pin_cfg_labels[i], idx, 0x07); if (err < 0) return err; imux->items[imux->num_items].label = auto_pin_cfg_labels[i]; imux->items[imux->num_items].index = idx; imux->num_items++; } if ((cfg->input_pins[i] >= 0x0f) && (cfg->input_pins[i] <= 0x10)){ idx = cfg->input_pins[i] - 0x09; err = new_analog_input(spec, cfg->input_pins[i], auto_pin_cfg_labels[i], idx, 0x07); if (err < 0) return err; imux->items[imux->num_items].label = auto_pin_cfg_labels[i]; imux->items[imux->num_items].index = idx; imux->num_items++; } } return 0; } static void alc260_auto_set_output_and_unmute(struct hda_codec *codec, hda_nid_t nid, int pin_type, int sel_idx) { /* set as output */ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, pin_type); snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE); /* need the manual connection? */ if (nid >= 0x12) { int idx = nid - 0x12; snd_hda_codec_write(codec, idx + 0x0b, 0, AC_VERB_SET_CONNECT_SEL, sel_idx); } } static void alc260_auto_init_multi_out(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; hda_nid_t nid; nid = spec->autocfg.line_out_pins[0]; if (nid) alc260_auto_set_output_and_unmute(codec, nid, PIN_OUT, 0); nid = spec->autocfg.speaker_pins[0]; if (nid) alc260_auto_set_output_and_unmute(codec, nid, PIN_OUT, 0); nid = spec->autocfg.hp_pin; if (nid) alc260_auto_set_output_and_unmute(codec, nid, PIN_OUT, 0); } #define ALC260_PIN_CD_NID 0x16 static void alc260_auto_init_analog_input(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; int i; for (i = 0; i < AUTO_PIN_LAST; i++) { hda_nid_t nid = spec->autocfg.input_pins[i]; if (nid >= 0x12) { snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, i <= AUTO_PIN_FRONT_MIC ? PIN_VREF80 : PIN_IN); if (nid != ALC260_PIN_CD_NID) snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE); } } } /* * generic initialization of ADC, input mixers and output mixers */ static struct hda_verb alc260_volume_init_verbs[] = { /* * Unmute ADC0-1 and set the default input to mic-in */ {0x04, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x05, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback * mixer widget * Note: PASD motherboards uses the Line In 2 as the input for front panel * mic (mic 2) */ /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)}, {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)}, /* * Set up output mixers (0x08 - 0x0a) */ /* set vol=0 to output mixers */ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, /* set up input amps for analog loopback */ /* Amp Indices: DAC = 0, mixer = 1 */ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, { } }; static int alc260_parse_auto_config(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; unsigned int wcap; int err; static hda_nid_t alc260_ignore[] = { 0x17, 0 }; if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, alc260_ignore)) < 0) return err; if ((err = alc260_auto_create_multi_out_ctls(spec, &spec->autocfg)) < 0) return err; if (! spec->kctl_alloc) return 0; /* can't find valid BIOS pin config */ if ((err = alc260_auto_create_analog_input_ctls(spec, &spec->autocfg)) < 0) return err; spec->multiout.max_channels = 2; if (spec->autocfg.dig_out_pin) spec->multiout.dig_out_nid = ALC260_DIGOUT_NID; if (spec->kctl_alloc) spec->mixers[spec->num_mixers++] = spec->kctl_alloc; spec->init_verbs[spec->num_init_verbs++] = alc260_volume_init_verbs; spec->num_mux_defs = 1; spec->input_mux = &spec->private_imux; /* check whether NID 0x04 is valid */ wcap = get_wcaps(codec, 0x04); wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT; /* get type */ if (wcap != AC_WID_AUD_IN) { spec->adc_nids = alc260_adc_nids_alt; spec->num_adc_nids = ARRAY_SIZE(alc260_adc_nids_alt); spec->mixers[spec->num_mixers] = alc260_capture_alt_mixer; } else { spec->adc_nids = alc260_adc_nids; spec->num_adc_nids = ARRAY_SIZE(alc260_adc_nids); spec->mixers[spec->num_mixers] = alc260_capture_mixer; } spec->num_mixers++; return 1; } /* additional initialization for auto-configuration model */ static void alc260_auto_init(struct hda_codec *codec) { alc260_auto_init_multi_out(codec); alc260_auto_init_analog_input(codec); } /* * ALC260 configurations */ static struct hda_board_config alc260_cfg_tbl[] = { { .modelname = "basic", .config = ALC260_BASIC }, { .pci_subvendor = 0x104d, .pci_subdevice = 0x81bb, .config = ALC260_BASIC }, /* Sony VAIO */ { .pci_subvendor = 0x104d, .pci_subdevice = 0x81cc, .config = ALC260_BASIC }, /* Sony VAIO VGN-S3HP */ { .pci_subvendor = 0x104d, .pci_subdevice = 0x81cd, .config = ALC260_BASIC }, /* Sony VAIO */ { .pci_subvendor = 0x152d, .pci_subdevice = 0x0729, .config = ALC260_BASIC }, /* CTL Travel Master U553W */ { .modelname = "hp", .config = ALC260_HP }, { .modelname = "hp-3013", .config = ALC260_HP_3013 }, { .pci_subvendor = 0x103c, .pci_subdevice = 0x3010, .config = ALC260_HP }, { .pci_subvendor = 0x103c, .pci_subdevice = 0x3011, .config = ALC260_HP }, { .pci_subvendor = 0x103c, .pci_subdevice = 0x3012, .config = ALC260_HP_3013 }, { .pci_subvendor = 0x103c, .pci_subdevice = 0x3013, .config = ALC260_HP_3013 }, { .pci_subvendor = 0x103c, .pci_subdevice = 0x3014, .config = ALC260_HP }, { .pci_subvendor = 0x103c, .pci_subdevice = 0x3015, .config = ALC260_HP }, { .pci_subvendor = 0x103c, .pci_subdevice = 0x3016, .config = ALC260_HP }, { .modelname = "fujitsu", .config = ALC260_FUJITSU_S702X }, { .pci_subvendor = 0x10cf, .pci_subdevice = 0x1326, .config = ALC260_FUJITSU_S702X }, { .modelname = "acer", .config = ALC260_ACER }, { .pci_subvendor = 0x1025, .pci_subdevice = 0x008f, .config = ALC260_ACER }, #ifdef CONFIG_SND_DEBUG { .modelname = "test", .config = ALC260_TEST }, #endif { .modelname = "auto", .config = ALC260_AUTO }, {} }; static struct alc_config_preset alc260_presets[] = { [ALC260_BASIC] = { .mixers = { alc260_base_output_mixer, alc260_input_mixer, alc260_pc_beep_mixer, alc260_capture_mixer }, .init_verbs = { alc260_init_verbs }, .num_dacs = ARRAY_SIZE(alc260_dac_nids), .dac_nids = alc260_dac_nids, .num_adc_nids = ARRAY_SIZE(alc260_adc_nids), .adc_nids = alc260_adc_nids, .num_channel_mode = ARRAY_SIZE(alc260_modes), .channel_mode = alc260_modes, .input_mux = &alc260_capture_source, }, [ALC260_HP] = { .mixers = { alc260_base_output_mixer, alc260_input_mixer, alc260_capture_alt_mixer }, .init_verbs = { alc260_init_verbs }, .num_dacs = ARRAY_SIZE(alc260_dac_nids), .dac_nids = alc260_dac_nids, .num_adc_nids = ARRAY_SIZE(alc260_hp_adc_nids), .adc_nids = alc260_hp_adc_nids, .num_channel_mode = ARRAY_SIZE(alc260_modes), .channel_mode = alc260_modes, .input_mux = &alc260_capture_source, }, [ALC260_HP_3013] = { .mixers = { alc260_hp_3013_mixer, alc260_input_mixer, alc260_capture_alt_mixer }, .init_verbs = { alc260_hp_3013_init_verbs }, .num_dacs = ARRAY_SIZE(alc260_dac_nids), .dac_nids = alc260_dac_nids, .num_adc_nids = ARRAY_SIZE(alc260_hp_adc_nids), .adc_nids = alc260_hp_adc_nids, .num_channel_mode = ARRAY_SIZE(alc260_modes), .channel_mode = alc260_modes, .input_mux = &alc260_capture_source, }, [ALC260_FUJITSU_S702X] = { .mixers = { alc260_fujitsu_mixer, alc260_capture_mixer }, .init_verbs = { alc260_fujitsu_init_verbs }, .num_dacs = ARRAY_SIZE(alc260_dac_nids), .dac_nids = alc260_dac_nids, .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids), .adc_nids = alc260_dual_adc_nids, .num_channel_mode = ARRAY_SIZE(alc260_modes), .channel_mode = alc260_modes, .num_mux_defs = ARRAY_SIZE(alc260_fujitsu_capture_sources), .input_mux = alc260_fujitsu_capture_sources, }, [ALC260_ACER] = { .mixers = { alc260_acer_mixer, alc260_capture_mixer }, .init_verbs = { alc260_acer_init_verbs }, .num_dacs = ARRAY_SIZE(alc260_dac_nids), .dac_nids = alc260_dac_nids, .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids), .adc_nids = alc260_dual_adc_nids, .num_channel_mode = ARRAY_SIZE(alc260_modes), .channel_mode = alc260_modes, .num_mux_defs = ARRAY_SIZE(alc260_acer_capture_sources), .input_mux = alc260_acer_capture_sources, }, #ifdef CONFIG_SND_DEBUG [ALC260_TEST] = { .mixers = { alc260_test_mixer, alc260_capture_mixer }, .init_verbs = { alc260_test_init_verbs }, .num_dacs = ARRAY_SIZE(alc260_test_dac_nids), .dac_nids = alc260_test_dac_nids, .num_adc_nids = ARRAY_SIZE(alc260_test_adc_nids), .adc_nids = alc260_test_adc_nids, .num_channel_mode = ARRAY_SIZE(alc260_modes), .channel_mode = alc260_modes, .num_mux_defs = ARRAY_SIZE(alc260_test_capture_sources), .input_mux = alc260_test_capture_sources, }, #endif }; static int patch_alc260(struct hda_codec *codec) { struct alc_spec *spec; int err, board_config; spec = kzalloc(sizeof(*spec), GFP_KERNEL); if (spec == NULL) return -ENOMEM; codec->spec = spec; board_config = snd_hda_check_board_config(codec, alc260_cfg_tbl); if (board_config < 0 || board_config >= ALC260_MODEL_LAST) { snd_printd(KERN_INFO "hda_codec: Unknown model for ALC260, " "trying auto-probe from BIOS...\n"); board_config = ALC260_AUTO; } if (board_config == ALC260_AUTO) { /* automatic parse from the BIOS config */ err = alc260_parse_auto_config(codec); if (err < 0) { alc_free(codec); return err; } else if (! err) { printk(KERN_INFO "hda_codec: Cannot set up configuration " "from BIOS. Using base mode...\n"); board_config = ALC260_BASIC; } } if (board_config != ALC260_AUTO) setup_preset(spec, &alc260_presets[board_config]); spec->stream_name_analog = "ALC260 Analog"; spec->stream_analog_playback = &alc260_pcm_analog_playback; spec->stream_analog_capture = &alc260_pcm_analog_capture; spec->stream_name_digital = "ALC260 Digital"; spec->stream_digital_playback = &alc260_pcm_digital_playback; spec->stream_digital_capture = &alc260_pcm_digital_capture; codec->patch_ops = alc_patch_ops; if (board_config == ALC260_AUTO) spec->init_hook = alc260_auto_init; return 0; } /* * ALC882 support * * ALC882 is almost identical with ALC880 but has cleaner and more flexible * configuration. Each pin widget can choose any input DACs and a mixer. * Each ADC is connected from a mixer of all inputs. This makes possible * 6-channel independent captures. * * In addition, an independent DAC for the multi-playback (not used in this * driver yet). */ #define ALC882_DIGOUT_NID 0x06 #define ALC882_DIGIN_NID 0x0a static struct hda_channel_mode alc882_ch_modes[1] = { { 8, NULL } }; static hda_nid_t alc882_dac_nids[4] = { /* front, rear, clfe, rear_surr */ 0x02, 0x03, 0x04, 0x05 }; /* identical with ALC880 */ #define alc882_adc_nids alc880_adc_nids #define alc882_adc_nids_alt alc880_adc_nids_alt /* input MUX */ /* FIXME: should be a matrix-type input source selection */ static struct hda_input_mux alc882_capture_source = { .num_items = 4, .items = { { "Mic", 0x0 }, { "Front Mic", 0x1 }, { "Line", 0x2 }, { "CD", 0x4 }, }, }; #define alc882_mux_enum_info alc_mux_enum_info #define alc882_mux_enum_get alc_mux_enum_get static int alc882_mux_enum_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); struct alc_spec *spec = codec->spec; const struct hda_input_mux *imux = spec->input_mux; unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id); static hda_nid_t capture_mixers[3] = { 0x24, 0x23, 0x22 }; hda_nid_t nid = capture_mixers[adc_idx]; unsigned int *cur_val = &spec->cur_mux[adc_idx]; unsigned int i, idx; idx = ucontrol->value.enumerated.item[0]; if (idx >= imux->num_items) idx = imux->num_items - 1; if (*cur_val == idx && ! codec->in_resume) return 0; for (i = 0; i < imux->num_items; i++) { unsigned int v = (i == idx) ? 0x7000 : 0x7080; snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, v | (imux->items[i].index << 8)); } *cur_val = idx; return 1; } /* * 6ch mode */ static struct hda_verb alc882_sixstack_ch6_init[] = { { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 }, { 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, { } /* end */ }; /* * 8ch mode */ static struct hda_verb alc882_sixstack_ch8_init[] = { { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, { 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, { } /* end */ }; static struct hda_channel_mode alc882_sixstack_modes[2] = { { 6, alc882_sixstack_ch6_init }, { 8, alc882_sixstack_ch8_init }, }; /* Pin assignment: Front=0x14, Rear=0x15, CLFE=0x16, Side=0x17 * Mic=0x18, Front Mic=0x19, Line-In=0x1a, HP=0x1b */ static struct snd_kcontrol_new alc882_base_mixer[] = { HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT), HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT), HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT), HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT), HDA_CODEC_VOLUME("Side Playback Volume", 0x0f, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Side Playback Switch", 0x0f, 2, HDA_INPUT), HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT), HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT), HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT), HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT), { } /* end */ }; static struct snd_kcontrol_new alc882_chmode_mixer[] = { { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Channel Mode", .info = alc_ch_mode_info, .get = alc_ch_mode_get, .put = alc_ch_mode_put, }, { } /* end */ }; static struct hda_verb alc882_init_verbs[] = { /* Front mixer: unmute input/output amp left and right (volume = 0) */ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* Rear mixer */ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* CLFE mixer */ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* Side mixer */ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* Front Pin: output 0 (0x0c) */ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x14, AC_VERB_SET_CONNECT_SEL, 0x00}, /* Rear Pin: output 1 (0x0d) */ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x15, AC_VERB_SET_CONNECT_SEL, 0x01}, /* CLFE Pin: output 2 (0x0e) */ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x16, AC_VERB_SET_CONNECT_SEL, 0x02}, /* Side Pin: output 3 (0x0f) */ {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x17, AC_VERB_SET_CONNECT_SEL, 0x03}, /* Mic (rear) pin: input vref at 80% */ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* Front Mic pin: input vref at 80% */ {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* Line In pin: input */ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* Line-2 In: Headphone output (output 0 - 0x0c) */ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00}, /* CD pin widget for input */ {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, /* FIXME: use matrix-type input source selection */ /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */ /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* Input mixer2 */ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* Input mixer3 */ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* ADC1: mute amp left and right */ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x07, AC_VERB_SET_CONNECT_SEL, 0x00}, /* ADC2: mute amp left and right */ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x08, AC_VERB_SET_CONNECT_SEL, 0x00}, /* ADC3: mute amp left and right */ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x09, AC_VERB_SET_CONNECT_SEL, 0x00}, { } }; static struct hda_verb alc882_eapd_verbs[] = { /* change to EAPD mode */ {0x20, AC_VERB_SET_COEF_INDEX, 0x07}, {0x20, AC_VERB_SET_PROC_COEF, 0x3060}, { } }; /* * generic initialization of ADC, input mixers and output mixers */ static struct hda_verb alc882_auto_init_verbs[] = { /* * Unmute ADC0-2 and set the default input to mic-in */ {0x07, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x08, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x09, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback * mixer widget * Note: PASD motherboards uses the Line In 2 as the input for front panel * mic (mic 2) */ /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)}, /* * Set up output mixers (0x0c - 0x0f) */ /* set vol=0 to output mixers */ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, /* set up input amps for analog loopback */ /* Amp Indices: DAC = 0, mixer = 1 */ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x26, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x26, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, /* FIXME: use matrix-type input source selection */ /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */ /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))}, {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))}, {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))}, /* Input mixer2 */ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))}, {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))}, {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))}, /* Input mixer3 */ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))}, {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))}, {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))}, { } }; /* capture mixer elements */ static struct snd_kcontrol_new alc882_capture_alt_mixer[] = { HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT), HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT), HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT), { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, /* The multiple "Capture Source" controls confuse alsamixer * So call somewhat different.. * FIXME: the controls appear in the "playback" view! */ /* .name = "Capture Source", */ .name = "Input Source", .count = 2, .info = alc882_mux_enum_info, .get = alc882_mux_enum_get, .put = alc882_mux_enum_put, }, { } /* end */ }; static struct snd_kcontrol_new alc882_capture_mixer[] = { HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT), HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT), HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT), HDA_CODEC_VOLUME_IDX("Capture Volume", 2, 0x09, 0x0, HDA_INPUT), HDA_CODEC_MUTE_IDX("Capture Switch", 2, 0x09, 0x0, HDA_INPUT), { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, /* The multiple "Capture Source" controls confuse alsamixer * So call somewhat different.. * FIXME: the controls appear in the "playback" view! */ /* .name = "Capture Source", */ .name = "Input Source", .count = 3, .info = alc882_mux_enum_info, .get = alc882_mux_enum_get, .put = alc882_mux_enum_put, }, { } /* end */ }; /* pcm configuration: identiacal with ALC880 */ #define alc882_pcm_analog_playback alc880_pcm_analog_playback #define alc882_pcm_analog_capture alc880_pcm_analog_capture #define alc882_pcm_digital_playback alc880_pcm_digital_playback #define alc882_pcm_digital_capture alc880_pcm_digital_capture /* * configuration and preset */ static struct hda_board_config alc882_cfg_tbl[] = { { .modelname = "3stack-dig", .config = ALC882_3ST_DIG }, { .modelname = "6stack-dig", .config = ALC882_6ST_DIG }, { .pci_subvendor = 0x1462, .pci_subdevice = 0x6668, .config = ALC882_6ST_DIG }, /* MSI */ { .pci_subvendor = 0x105b, .pci_subdevice = 0x6668, .config = ALC882_6ST_DIG }, /* Foxconn */ { .pci_subvendor = 0x1019, .pci_subdevice = 0x6668, .config = ALC882_6ST_DIG }, /* ECS to Intel*/ { .modelname = "arima", .config = ALC882_ARIMA }, { .pci_subvendor = 0x161f, .pci_subdevice = 0x2054, .config = ALC882_ARIMA }, /* Arima W820Di1 */ { .modelname = "auto", .config = ALC882_AUTO }, {} }; static struct alc_config_preset alc882_presets[] = { [ALC882_3ST_DIG] = { .mixers = { alc882_base_mixer }, .init_verbs = { alc882_init_verbs }, .num_dacs = ARRAY_SIZE(alc882_dac_nids), .dac_nids = alc882_dac_nids, .dig_out_nid = ALC882_DIGOUT_NID, .dig_in_nid = ALC882_DIGIN_NID, .num_channel_mode = ARRAY_SIZE(alc882_ch_modes), .channel_mode = alc882_ch_modes, .need_dac_fix = 1, .input_mux = &alc882_capture_source, }, [ALC882_6ST_DIG] = { .mixers = { alc882_base_mixer, alc882_chmode_mixer }, .init_verbs = { alc882_init_verbs }, .num_dacs = ARRAY_SIZE(alc882_dac_nids), .dac_nids = alc882_dac_nids, .dig_out_nid = ALC882_DIGOUT_NID, .dig_in_nid = ALC882_DIGIN_NID, .num_channel_mode = ARRAY_SIZE(alc882_sixstack_modes), .channel_mode = alc882_sixstack_modes, .input_mux = &alc882_capture_source, }, [ALC882_ARIMA] = { .mixers = { alc882_base_mixer, alc882_chmode_mixer }, .init_verbs = { alc882_init_verbs, alc882_eapd_verbs }, .num_dacs = ARRAY_SIZE(alc882_dac_nids), .dac_nids = alc882_dac_nids, .num_channel_mode = ARRAY_SIZE(alc882_sixstack_modes), .channel_mode = alc882_sixstack_modes, .input_mux = &alc882_capture_source, }, }; /* * BIOS auto configuration */ static void alc882_auto_set_output_and_unmute(struct hda_codec *codec, hda_nid_t nid, int pin_type, int dac_idx) { /* set as output */ struct alc_spec *spec = codec->spec; int idx; if (spec->multiout.dac_nids[dac_idx] == 0x25) idx = 4; else idx = spec->multiout.dac_nids[dac_idx] - 2; snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, pin_type); snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE); snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CONNECT_SEL, idx); } static void alc882_auto_init_multi_out(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; int i; for (i = 0; i <= HDA_SIDE; i++) { hda_nid_t nid = spec->autocfg.line_out_pins[i]; if (nid) alc882_auto_set_output_and_unmute(codec, nid, PIN_OUT, i); } } static void alc882_auto_init_hp_out(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; hda_nid_t pin; pin = spec->autocfg.hp_pin; if (pin) /* connect to front */ alc882_auto_set_output_and_unmute(codec, pin, PIN_HP, 0); /* use dac 0 */ } #define alc882_is_input_pin(nid) alc880_is_input_pin(nid) #define ALC882_PIN_CD_NID ALC880_PIN_CD_NID static void alc882_auto_init_analog_input(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; int i; for (i = 0; i < AUTO_PIN_LAST; i++) { hda_nid_t nid = spec->autocfg.input_pins[i]; if (alc882_is_input_pin(nid)) { snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, i <= AUTO_PIN_FRONT_MIC ? PIN_VREF80 : PIN_IN); if (nid != ALC882_PIN_CD_NID) snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE); } } } /* almost identical with ALC880 parser... */ static int alc882_parse_auto_config(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; int err = alc880_parse_auto_config(codec); if (err < 0) return err; else if (err > 0) /* hack - override the init verbs */ spec->init_verbs[0] = alc882_auto_init_verbs; return err; } /* additional initialization for auto-configuration model */ static void alc882_auto_init(struct hda_codec *codec) { alc882_auto_init_multi_out(codec); alc882_auto_init_hp_out(codec); alc882_auto_init_analog_input(codec); } static int patch_alc882(struct hda_codec *codec) { struct alc_spec *spec; int err, board_config; spec = kzalloc(sizeof(*spec), GFP_KERNEL); if (spec == NULL) return -ENOMEM; codec->spec = spec; board_config = snd_hda_check_board_config(codec, alc882_cfg_tbl); if (board_config < 0 || board_config >= ALC882_MODEL_LAST) { printk(KERN_INFO "hda_codec: Unknown model for ALC882, " "trying auto-probe from BIOS...\n"); board_config = ALC882_AUTO; } if (board_config == ALC882_AUTO) { /* automatic parse from the BIOS config */ err = alc882_parse_auto_config(codec); if (err < 0) { alc_free(codec); return err; } else if (! err) { printk(KERN_INFO "hda_codec: Cannot set up configuration " "from BIOS. Using base mode...\n"); board_config = ALC882_3ST_DIG; } } if (board_config != ALC882_AUTO) setup_preset(spec, &alc882_presets[board_config]); spec->stream_name_analog = "ALC882 Analog"; spec->stream_analog_playback = &alc882_pcm_analog_playback; spec->stream_analog_capture = &alc882_pcm_analog_capture; spec->stream_name_digital = "ALC882 Digital"; spec->stream_digital_playback = &alc882_pcm_digital_playback; spec->stream_digital_capture = &alc882_pcm_digital_capture; if (! spec->adc_nids && spec->input_mux) { /* check whether NID 0x07 is valid */ unsigned int wcap = get_wcaps(codec, 0x07); wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT; /* get type */ if (wcap != AC_WID_AUD_IN) { spec->adc_nids = alc882_adc_nids_alt; spec->num_adc_nids = ARRAY_SIZE(alc882_adc_nids_alt); spec->mixers[spec->num_mixers] = alc882_capture_alt_mixer; spec->num_mixers++; } else { spec->adc_nids = alc882_adc_nids; spec->num_adc_nids = ARRAY_SIZE(alc882_adc_nids); spec->mixers[spec->num_mixers] = alc882_capture_mixer; spec->num_mixers++; } } codec->patch_ops = alc_patch_ops; if (board_config == ALC882_AUTO) spec->init_hook = alc882_auto_init; return 0; } /* * ALC883 support * * ALC883 is almost identical with ALC880 but has cleaner and more flexible * configuration. Each pin widget can choose any input DACs and a mixer. * Each ADC is connected from a mixer of all inputs. This makes possible * 6-channel independent captures. * * In addition, an independent DAC for the multi-playback (not used in this * driver yet). */ #define ALC883_DIGOUT_NID 0x06 #define ALC883_DIGIN_NID 0x0a static hda_nid_t alc883_dac_nids[4] = { /* front, rear, clfe, rear_surr */ 0x02, 0x04, 0x03, 0x05 }; static hda_nid_t alc883_adc_nids[2] = { /* ADC1-2 */ 0x08, 0x09, }; /* input MUX */ /* FIXME: should be a matrix-type input source selection */ static struct hda_input_mux alc883_capture_source = { .num_items = 4, .items = { { "Mic", 0x0 }, { "Front Mic", 0x1 }, { "Line", 0x2 }, { "CD", 0x4 }, }, }; #define alc883_mux_enum_info alc_mux_enum_info #define alc883_mux_enum_get alc_mux_enum_get static int alc883_mux_enum_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); struct alc_spec *spec = codec->spec; const struct hda_input_mux *imux = spec->input_mux; unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id); static hda_nid_t capture_mixers[3] = { 0x24, 0x23, 0x22 }; hda_nid_t nid = capture_mixers[adc_idx]; unsigned int *cur_val = &spec->cur_mux[adc_idx]; unsigned int i, idx; idx = ucontrol->value.enumerated.item[0]; if (idx >= imux->num_items) idx = imux->num_items - 1; if (*cur_val == idx && ! codec->in_resume) return 0; for (i = 0; i < imux->num_items; i++) { unsigned int v = (i == idx) ? 0x7000 : 0x7080; snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, v | (imux->items[i].index << 8)); } *cur_val = idx; return 1; } /* * 2ch mode */ static struct hda_channel_mode alc883_3ST_2ch_modes[1] = { { 2, NULL } }; /* * 2ch mode */ static struct hda_verb alc883_3ST_ch2_init[] = { { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN }, { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, { } /* end */ }; /* * 6ch mode */ static struct hda_verb alc883_3ST_ch6_init[] = { { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, { 0x18, AC_VERB_SET_CONNECT_SEL, 0x02 }, { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 }, { } /* end */ }; static struct hda_channel_mode alc883_3ST_6ch_modes[2] = { { 2, alc883_3ST_ch2_init }, { 6, alc883_3ST_ch6_init }, }; /* * 6ch mode */ static struct hda_verb alc883_sixstack_ch6_init[] = { { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 }, { 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, { } /* end */ }; /* * 8ch mode */ static struct hda_verb alc883_sixstack_ch8_init[] = { { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, { 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, { } /* end */ }; static struct hda_channel_mode alc883_sixstack_modes[2] = { { 6, alc883_sixstack_ch6_init }, { 8, alc883_sixstack_ch8_init }, }; /* Pin assignment: Front=0x14, Rear=0x15, CLFE=0x16, Side=0x17 * Mic=0x18, Front Mic=0x19, Line-In=0x1a, HP=0x1b */ static struct snd_kcontrol_new alc883_base_mixer[] = { HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT), HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT), HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT), HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT), HDA_CODEC_VOLUME("Side Playback Volume", 0x0f, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Side Playback Switch", 0x0f, 2, HDA_INPUT), HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT), HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT), HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT), HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT), HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT), HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT), HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT), { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, /* .name = "Capture Source", */ .name = "Input Source", .count = 2, .info = alc883_mux_enum_info, .get = alc883_mux_enum_get, .put = alc883_mux_enum_put, }, { } /* end */ }; static struct snd_kcontrol_new alc883_3ST_2ch_mixer[] = { HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT), HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT), HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT), HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT), HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT), HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT), HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT), { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, /* .name = "Capture Source", */ .name = "Input Source", .count = 2, .info = alc883_mux_enum_info, .get = alc883_mux_enum_get, .put = alc883_mux_enum_put, }, { } /* end */ }; static struct snd_kcontrol_new alc883_3ST_6ch_mixer[] = { HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT), HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT), HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT), HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT), HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT), HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT), HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT), HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT), HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT), HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT), HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT), { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, /* .name = "Capture Source", */ .name = "Input Source", .count = 2, .info = alc883_mux_enum_info, .get = alc883_mux_enum_get, .put = alc883_mux_enum_put, }, { } /* end */ }; static struct snd_kcontrol_new alc883_chmode_mixer[] = { { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Channel Mode", .info = alc_ch_mode_info, .get = alc_ch_mode_get, .put = alc_ch_mode_put, }, { } /* end */ }; static struct hda_verb alc883_init_verbs[] = { /* ADC1: mute amp left and right */ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x08, AC_VERB_SET_CONNECT_SEL, 0x00}, /* ADC2: mute amp left and right */ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x09, AC_VERB_SET_CONNECT_SEL, 0x00}, /* Front mixer: unmute input/output amp left and right (volume = 0) */ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* Rear mixer */ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* CLFE mixer */ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* Side mixer */ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)}, /* Front Pin: output 0 (0x0c) */ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x14, AC_VERB_SET_CONNECT_SEL, 0x00}, /* Rear Pin: output 1 (0x0d) */ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x15, AC_VERB_SET_CONNECT_SEL, 0x01}, /* CLFE Pin: output 2 (0x0e) */ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x16, AC_VERB_SET_CONNECT_SEL, 0x02}, /* Side Pin: output 3 (0x0f) */ {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x17, AC_VERB_SET_CONNECT_SEL, 0x03}, /* Mic (rear) pin: input vref at 80% */ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* Front Mic pin: input vref at 80% */ {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* Line In pin: input */ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* Line-2 In: Headphone output (output 0 - 0x0c) */ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00}, /* CD pin widget for input */ {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, /* FIXME: use matrix-type input source selection */ /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */ /* Input mixer2 */ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)}, {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)}, /* Input mixer3 */ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)}, {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)}, { } }; /* * generic initialization of ADC, input mixers and output mixers */ static struct hda_verb alc883_auto_init_verbs[] = { /* * Unmute ADC0-2 and set the default input to mic-in */ {0x08, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x09, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback * mixer widget * Note: PASD motherboards uses the Line In 2 as the input for front panel * mic (mic 2) */ /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)}, /* * Set up output mixers (0x0c - 0x0f) */ /* set vol=0 to output mixers */ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, /* set up input amps for analog loopback */ /* Amp Indices: DAC = 0, mixer = 1 */ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x26, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x26, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, /* FIXME: use matrix-type input source selection */ /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */ /* Input mixer1 */ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)}, //{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)}, /* Input mixer2 */ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)}, //{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)}, { } }; /* capture mixer elements */ static struct snd_kcontrol_new alc883_capture_mixer[] = { HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT), HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT), HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT), { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, /* The multiple "Capture Source" controls confuse alsamixer * So call somewhat different.. * FIXME: the controls appear in the "playback" view! */ /* .name = "Capture Source", */ .name = "Input Source", .count = 2, .info = alc882_mux_enum_info, .get = alc882_mux_enum_get, .put = alc882_mux_enum_put, }, { } /* end */ }; /* pcm configuration: identiacal with ALC880 */ #define alc883_pcm_analog_playback alc880_pcm_analog_playback #define alc883_pcm_analog_capture alc880_pcm_analog_capture #define alc883_pcm_digital_playback alc880_pcm_digital_playback #define alc883_pcm_digital_capture alc880_pcm_digital_capture /* * configuration and preset */ static struct hda_board_config alc883_cfg_tbl[] = { { .modelname = "3stack-dig", .config = ALC883_3ST_2ch_DIG }, { .modelname = "3stack-6ch-dig", .config = ALC883_3ST_6ch_DIG }, { .pci_subvendor = 0x1019, .pci_subdevice = 0x6668, .config = ALC883_3ST_6ch_DIG }, /* ECS to Intel*/ { .modelname = "3stack-6ch", .config = ALC883_3ST_6ch }, { .pci_subvendor = 0x108e, .pci_subdevice = 0x534d, .config = ALC883_3ST_6ch }, { .modelname = "6stack-dig", .config = ALC883_6ST_DIG }, { .pci_subvendor = 0x1462, .pci_subdevice = 0x6668, .config = ALC883_6ST_DIG }, /* MSI */ { .pci_subvendor = 0x105b, .pci_subdevice = 0x6668, .config = ALC883_6ST_DIG }, /* Foxconn */ { .modelname = "6stack-dig-demo", .config = ALC888_DEMO_BOARD }, { .modelname = "auto", .config = ALC883_AUTO }, {} }; static struct alc_config_preset alc883_presets[] = { [ALC883_3ST_2ch_DIG] = { .mixers = { alc883_3ST_2ch_mixer }, .init_verbs = { alc883_init_verbs }, .num_dacs = ARRAY_SIZE(alc883_dac_nids), .dac_nids = alc883_dac_nids, .dig_out_nid = ALC883_DIGOUT_NID, .num_adc_nids = ARRAY_SIZE(alc883_adc_nids), .adc_nids = alc883_adc_nids, .dig_in_nid = ALC883_DIGIN_NID, .num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes), .channel_mode = alc883_3ST_2ch_modes, .input_mux = &alc883_capture_source, }, [ALC883_3ST_6ch_DIG] = { .mixers = { alc883_3ST_6ch_mixer, alc883_chmode_mixer }, .init_verbs = { alc883_init_verbs }, .num_dacs = ARRAY_SIZE(alc883_dac_nids), .dac_nids = alc883_dac_nids, .dig_out_nid = ALC883_DIGOUT_NID, .num_adc_nids = ARRAY_SIZE(alc883_adc_nids), .adc_nids = alc883_adc_nids, .dig_in_nid = ALC883_DIGIN_NID, .num_channel_mode = ARRAY_SIZE(alc883_3ST_6ch_modes), .channel_mode = alc883_3ST_6ch_modes, .need_dac_fix = 1, .input_mux = &alc883_capture_source, }, [ALC883_3ST_6ch] = { .mixers = { alc883_3ST_6ch_mixer, alc883_chmode_mixer }, .init_verbs = { alc883_init_verbs }, .num_dacs = ARRAY_SIZE(alc883_dac_nids), .dac_nids = alc883_dac_nids, .num_adc_nids = ARRAY_SIZE(alc883_adc_nids), .adc_nids = alc883_adc_nids, .num_channel_mode = ARRAY_SIZE(alc883_3ST_6ch_modes), .channel_mode = alc883_3ST_6ch_modes, .need_dac_fix = 1, .input_mux = &alc883_capture_source, }, [ALC883_6ST_DIG] = { .mixers = { alc883_base_mixer, alc883_chmode_mixer }, .init_verbs = { alc883_init_verbs }, .num_dacs = ARRAY_SIZE(alc883_dac_nids), .dac_nids = alc883_dac_nids, .dig_out_nid = ALC883_DIGOUT_NID, .num_adc_nids = ARRAY_SIZE(alc883_adc_nids), .adc_nids = alc883_adc_nids, .dig_in_nid = ALC883_DIGIN_NID, .num_channel_mode = ARRAY_SIZE(alc883_sixstack_modes), .channel_mode = alc883_sixstack_modes, .input_mux = &alc883_capture_source, }, [ALC888_DEMO_BOARD] = { .mixers = { alc883_base_mixer, alc883_chmode_mixer }, .init_verbs = { alc883_init_verbs }, .num_dacs = ARRAY_SIZE(alc883_dac_nids), .dac_nids = alc883_dac_nids, .dig_out_nid = ALC883_DIGOUT_NID, .num_adc_nids = ARRAY_SIZE(alc883_adc_nids), .adc_nids = alc883_adc_nids, .dig_in_nid = ALC883_DIGIN_NID, .num_channel_mode = ARRAY_SIZE(alc883_sixstack_modes), .channel_mode = alc883_sixstack_modes, .input_mux = &alc883_capture_source, }, }; /* * BIOS auto configuration */ static void alc883_auto_set_output_and_unmute(struct hda_codec *codec, hda_nid_t nid, int pin_type, int dac_idx) { /* set as output */ struct alc_spec *spec = codec->spec; int idx; if (spec->multiout.dac_nids[dac_idx] == 0x25) idx = 4; else idx = spec->multiout.dac_nids[dac_idx] - 2; snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, pin_type); snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE); snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CONNECT_SEL, idx); } static void alc883_auto_init_multi_out(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; int i; for (i = 0; i <= HDA_SIDE; i++) { hda_nid_t nid = spec->autocfg.line_out_pins[i]; if (nid) alc883_auto_set_output_and_unmute(codec, nid, PIN_OUT, i); } } static void alc883_auto_init_hp_out(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; hda_nid_t pin; pin = spec->autocfg.hp_pin; if (pin) /* connect to front */ /* use dac 0 */ alc883_auto_set_output_and_unmute(codec, pin, PIN_HP, 0); } #define alc883_is_input_pin(nid) alc880_is_input_pin(nid) #define ALC883_PIN_CD_NID ALC880_PIN_CD_NID static void alc883_auto_init_analog_input(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; int i; for (i = 0; i < AUTO_PIN_LAST; i++) { hda_nid_t nid = spec->autocfg.input_pins[i]; if (alc883_is_input_pin(nid)) { snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, (i <= AUTO_PIN_FRONT_MIC ? PIN_VREF80 : PIN_IN)); if (nid != ALC883_PIN_CD_NID) snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE); } } } /* almost identical with ALC880 parser... */ static int alc883_parse_auto_config(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; int err = alc880_parse_auto_config(codec); if (err < 0) return err; else if (err > 0) /* hack - override the init verbs */ spec->init_verbs[0] = alc883_auto_init_verbs; spec->mixers[spec->num_mixers] = alc883_capture_mixer; spec->num_mixers++; return err; } /* additional initialization for auto-configuration model */ static void alc883_auto_init(struct hda_codec *codec) { alc883_auto_init_multi_out(codec); alc883_auto_init_hp_out(codec); alc883_auto_init_analog_input(codec); } static int patch_alc883(struct hda_codec *codec) { struct alc_spec *spec; int err, board_config; spec = kzalloc(sizeof(*spec), GFP_KERNEL); if (spec == NULL) return -ENOMEM; codec->spec = spec; board_config = snd_hda_check_board_config(codec, alc883_cfg_tbl); if (board_config < 0 || board_config >= ALC883_MODEL_LAST) { printk(KERN_INFO "hda_codec: Unknown model for ALC883, " "trying auto-probe from BIOS...\n"); board_config = ALC883_AUTO; } if (board_config == ALC883_AUTO) { /* automatic parse from the BIOS config */ err = alc883_parse_auto_config(codec); if (err < 0) { alc_free(codec); return err; } else if (! err) { printk(KERN_INFO "hda_codec: Cannot set up configuration " "from BIOS. Using base mode...\n"); board_config = ALC883_3ST_2ch_DIG; } } if (board_config != ALC883_AUTO) setup_preset(spec, &alc883_presets[board_config]); spec->stream_name_analog = "ALC883 Analog"; spec->stream_analog_playback = &alc883_pcm_analog_playback; spec->stream_analog_capture = &alc883_pcm_analog_capture; spec->stream_name_digital = "ALC883 Digital"; spec->stream_digital_playback = &alc883_pcm_digital_playback; spec->stream_digital_capture = &alc883_pcm_digital_capture; if (! spec->adc_nids && spec->input_mux) { spec->adc_nids = alc883_adc_nids; spec->num_adc_nids = ARRAY_SIZE(alc883_adc_nids); } codec->patch_ops = alc_patch_ops; if (board_config == ALC883_AUTO) spec->init_hook = alc883_auto_init; return 0; } /* * ALC262 support */ #define ALC262_DIGOUT_NID ALC880_DIGOUT_NID #define ALC262_DIGIN_NID ALC880_DIGIN_NID #define alc262_dac_nids alc260_dac_nids #define alc262_adc_nids alc882_adc_nids #define alc262_adc_nids_alt alc882_adc_nids_alt #define alc262_modes alc260_modes #define alc262_capture_source alc882_capture_source static struct snd_kcontrol_new alc262_base_mixer[] = { HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x01, HDA_INPUT), HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT), /* HDA_CODEC_VOLUME("PC Beep Playback Volume", 0x0b, 0x05, HDA_INPUT), HDA_CODEC_MUTE("PC Beelp Playback Switch", 0x0b, 0x05, HDA_INPUT), */ HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0D, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE_MONO("Mono Playback Switch", 0x16, 2, 0x0, HDA_OUTPUT), { } /* end */ }; static struct snd_kcontrol_new alc262_HP_BPC_mixer[] = { HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Front Playback Switch", 0x15, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE_MONO("Mono Playback Switch", 0x16, 2, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x01, HDA_INPUT), HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT), HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_VOLUME("PC Beep Playback Volume", 0x0b, 0x05, HDA_INPUT), HDA_CODEC_MUTE("PC Beep Playback Switch", 0x0b, 0x05, HDA_INPUT), HDA_CODEC_VOLUME("AUX IN Playback Volume", 0x0b, 0x06, HDA_INPUT), HDA_CODEC_MUTE("AUX IN Playback Switch", 0x0b, 0x06, HDA_INPUT), { } /* end */ }; #define alc262_capture_mixer alc882_capture_mixer #define alc262_capture_alt_mixer alc882_capture_alt_mixer /* * generic initialization of ADC, input mixers and output mixers */ static struct hda_verb alc262_init_verbs[] = { /* * Unmute ADC0-2 and set the default input to mic-in */ {0x07, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x08, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x09, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback * mixer widget * Note: PASD motherboards uses the Line In 2 as the input for front panel * mic (mic 2) */ /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)}, /* * Set up output mixers (0x0c - 0x0e) */ /* set vol=0 to output mixers */ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, /* set up input amps for analog loopback */ /* Amp Indices: DAC = 0, mixer = 1 */ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0}, {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24}, {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20}, {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20}, {0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000}, {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000}, {0x16, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000}, {0x18, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000}, {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000}, {0x14, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x15, AC_VERB_SET_CONNECT_SEL, 0x01}, /* FIXME: use matrix-type input source selection */ /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */ /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))}, {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))}, {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))}, /* Input mixer2 */ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))}, {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))}, {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))}, /* Input mixer3 */ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))}, {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))}, {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))}, { } }; /* * fujitsu model * 0x14 = headphone/spdif-out, 0x15 = internal speaker */ #define ALC_HP_EVENT 0x37 static struct hda_verb alc262_fujitsu_unsol_verbs[] = { {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT}, {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, {} }; static struct hda_input_mux alc262_fujitsu_capture_source = { .num_items = 2, .items = { { "Mic", 0x0 }, { "CD", 0x4 }, }, }; static struct hda_input_mux alc262_HP_capture_source = { .num_items = 5, .items = { { "Mic", 0x0 }, { "Front Mic", 0x3 }, { "Line", 0x2 }, { "CD", 0x4 }, { "AUX IN", 0x6 }, }, }; /* mute/unmute internal speaker according to the hp jack and mute state */ static void alc262_fujitsu_automute(struct hda_codec *codec, int force) { struct alc_spec *spec = codec->spec; unsigned int mute; if (force || ! spec->sense_updated) { unsigned int present; /* need to execute and sync at first */ snd_hda_codec_read(codec, 0x14, 0, AC_VERB_SET_PIN_SENSE, 0); present = snd_hda_codec_read(codec, 0x14, 0, AC_VERB_GET_PIN_SENSE, 0); spec->jack_present = (present & 0x80000000) != 0; spec->sense_updated = 1; } if (spec->jack_present) { /* mute internal speaker */ snd_hda_codec_amp_update(codec, 0x15, 0, HDA_OUTPUT, 0, 0x80, 0x80); snd_hda_codec_amp_update(codec, 0x15, 1, HDA_OUTPUT, 0, 0x80, 0x80); } else { /* unmute internal speaker if necessary */ mute = snd_hda_codec_amp_read(codec, 0x14, 0, HDA_OUTPUT, 0); snd_hda_codec_amp_update(codec, 0x15, 0, HDA_OUTPUT, 0, 0x80, mute & 0x80); mute = snd_hda_codec_amp_read(codec, 0x14, 1, HDA_OUTPUT, 0); snd_hda_codec_amp_update(codec, 0x15, 1, HDA_OUTPUT, 0, 0x80, mute & 0x80); } } /* unsolicited event for HP jack sensing */ static void alc262_fujitsu_unsol_event(struct hda_codec *codec, unsigned int res) { if ((res >> 26) != ALC_HP_EVENT) return; alc262_fujitsu_automute(codec, 1); } /* bind volumes of both NID 0x0c and 0x0d */ static int alc262_fujitsu_master_vol_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); long *valp = ucontrol->value.integer.value; int change; change = snd_hda_codec_amp_update(codec, 0x0c, 0, HDA_OUTPUT, 0, 0x7f, valp[0] & 0x7f); change |= snd_hda_codec_amp_update(codec, 0x0c, 1, HDA_OUTPUT, 0, 0x7f, valp[1] & 0x7f); snd_hda_codec_amp_update(codec, 0x0d, 0, HDA_OUTPUT, 0, 0x7f, valp[0] & 0x7f); snd_hda_codec_amp_update(codec, 0x0d, 1, HDA_OUTPUT, 0, 0x7f, valp[1] & 0x7f); return change; } /* bind hp and internal speaker mute (with plug check) */ static int alc262_fujitsu_master_sw_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); long *valp = ucontrol->value.integer.value; int change; change = snd_hda_codec_amp_update(codec, 0x14, 0, HDA_OUTPUT, 0, 0x80, valp[0] ? 0 : 0x80); change |= snd_hda_codec_amp_update(codec, 0x14, 1, HDA_OUTPUT, 0, 0x80, valp[1] ? 0 : 0x80); if (change || codec->in_resume) alc262_fujitsu_automute(codec, codec->in_resume); return change; } static struct snd_kcontrol_new alc262_fujitsu_mixer[] = { { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Master Playback Volume", .info = snd_hda_mixer_amp_volume_info, .get = snd_hda_mixer_amp_volume_get, .put = alc262_fujitsu_master_vol_put, .private_value = HDA_COMPOSE_AMP_VAL(0x0c, 3, 0, HDA_OUTPUT), }, { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Master Playback Switch", .info = snd_hda_mixer_amp_switch_info, .get = snd_hda_mixer_amp_switch_get, .put = alc262_fujitsu_master_sw_put, .private_value = HDA_COMPOSE_AMP_VAL(0x14, 3, 0, HDA_OUTPUT), }, HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT), HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), { } /* end */ }; /* additional init verbs for Benq laptops */ static struct hda_verb alc262_EAPD_verbs[] = { {0x20, AC_VERB_SET_COEF_INDEX, 0x07}, {0x20, AC_VERB_SET_PROC_COEF, 0x3070}, {} }; /* add playback controls from the parsed DAC table */ static int alc262_auto_create_multi_out_ctls(struct alc_spec *spec, const struct auto_pin_cfg *cfg) { hda_nid_t nid; int err; spec->multiout.num_dacs = 1; /* only use one dac */ spec->multiout.dac_nids = spec->private_dac_nids; spec->multiout.dac_nids[0] = 2; nid = cfg->line_out_pins[0]; if (nid) { if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "Front Playback Volume", HDA_COMPOSE_AMP_VAL(0x0c, 3, 0, HDA_OUTPUT))) < 0) return err; if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Front Playback Switch", HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0) return err; } nid = cfg->speaker_pins[0]; if (nid) { if (nid == 0x16) { if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "Speaker Playback Volume", HDA_COMPOSE_AMP_VAL(0x0e, 2, 0, HDA_OUTPUT))) < 0) return err; if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Speaker Playback Switch", HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT))) < 0) return err; } else { if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Speaker Playback Switch", HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0) return err; } } nid = cfg->hp_pin; if (nid) { /* spec->multiout.hp_nid = 2; */ if (nid == 0x16) { if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "Headphone Playback Volume", HDA_COMPOSE_AMP_VAL(0x0e, 2, 0, HDA_OUTPUT))) < 0) return err; if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Headphone Playback Switch", HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT))) < 0) return err; } else { if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Headphone Playback Switch", HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0) return err; } } return 0; } /* identical with ALC880 */ #define alc262_auto_create_analog_input_ctls alc880_auto_create_analog_input_ctls /* * generic initialization of ADC, input mixers and output mixers */ static struct hda_verb alc262_volume_init_verbs[] = { /* * Unmute ADC0-2 and set the default input to mic-in */ {0x07, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x08, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x09, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback * mixer widget * Note: PASD motherboards uses the Line In 2 as the input for front panel * mic (mic 2) */ /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)}, /* * Set up output mixers (0x0c - 0x0f) */ /* set vol=0 to output mixers */ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, /* set up input amps for analog loopback */ /* Amp Indices: DAC = 0, mixer = 1 */ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, /* FIXME: use matrix-type input source selection */ /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */ /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))}, {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))}, {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))}, /* Input mixer2 */ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))}, {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))}, {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))}, /* Input mixer3 */ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))}, {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))}, {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))}, { } }; static struct hda_verb alc262_HP_BPC_init_verbs[] = { /* * Unmute ADC0-2 and set the default input to mic-in */ {0x07, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x08, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x09, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback * mixer widget * Note: PASD motherboards uses the Line In 2 as the input for front panel * mic (mic 2) */ /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(5)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(6)}, /* * Set up output mixers (0x0c - 0x0e) */ /* set vol=0 to output mixers */ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, /* set up input amps for analog loopback */ /* Amp Indices: DAC = 0, mixer = 1 */ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0}, {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x15, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20}, {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24}, {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24}, {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20}, {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20}, {0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x7023 }, {0x18, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 }, {0x19, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 }, {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0x7023 }, {0x1c, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 }, {0x1d, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000 }, /* FIXME: use matrix-type input source selection */ /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */ /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x03 << 8))}, {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))}, {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))}, /* Input mixer2 */ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x03 << 8))}, {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))}, {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))}, /* Input mixer3 */ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x03 << 8))}, {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))}, {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))}, { } }; /* pcm configuration: identiacal with ALC880 */ #define alc262_pcm_analog_playback alc880_pcm_analog_playback #define alc262_pcm_analog_capture alc880_pcm_analog_capture #define alc262_pcm_digital_playback alc880_pcm_digital_playback #define alc262_pcm_digital_capture alc880_pcm_digital_capture /* * BIOS auto configuration */ static int alc262_parse_auto_config(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; int err; static hda_nid_t alc262_ignore[] = { 0x1d, 0 }; if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, alc262_ignore)) < 0) return err; if (! spec->autocfg.line_outs) return 0; /* can't find valid BIOS pin config */ if ((err = alc262_auto_create_multi_out_ctls(spec, &spec->autocfg)) < 0 || (err = alc262_auto_create_analog_input_ctls(spec, &spec->autocfg)) < 0) return err; spec->multiout.max_channels = spec->multiout.num_dacs * 2; if (spec->autocfg.dig_out_pin) spec->multiout.dig_out_nid = ALC262_DIGOUT_NID; if (spec->autocfg.dig_in_pin) spec->dig_in_nid = ALC262_DIGIN_NID; if (spec->kctl_alloc) spec->mixers[spec->num_mixers++] = spec->kctl_alloc; spec->init_verbs[spec->num_init_verbs++] = alc262_volume_init_verbs; spec->num_mux_defs = 1; spec->input_mux = &spec->private_imux; return 1; } #define alc262_auto_init_multi_out alc882_auto_init_multi_out #define alc262_auto_init_hp_out alc882_auto_init_hp_out #define alc262_auto_init_analog_input alc882_auto_init_analog_input /* init callback for auto-configuration model -- overriding the default init */ static void alc262_auto_init(struct hda_codec *codec) { alc262_auto_init_multi_out(codec); alc262_auto_init_hp_out(codec); alc262_auto_init_analog_input(codec); } /* * configuration and preset */ static struct hda_board_config alc262_cfg_tbl[] = { { .modelname = "basic", .config = ALC262_BASIC }, { .modelname = "fujitsu", .config = ALC262_FUJITSU }, { .pci_subvendor = 0x10cf, .pci_subdevice = 0x1397, .config = ALC262_FUJITSU }, { .modelname = "hp-bpc", .config = ALC262_HP_BPC }, { .pci_subvendor = 0x103c, .pci_subdevice = 0x208c, .config = ALC262_HP_BPC }, /* xw4400 */ { .pci_subvendor = 0x103c, .pci_subdevice = 0x3014, .config = ALC262_HP_BPC }, /* xw6400 */ { .pci_subvendor = 0x103c, .pci_subdevice = 0x3015, .config = ALC262_HP_BPC }, /* xw8400 */ { .pci_subvendor = 0x103c, .pci_subdevice = 0x12fe, .config = ALC262_HP_BPC }, /* xw9400 */ { .modelname = "benq", .config = ALC262_BENQ_ED8 }, { .pci_subvendor = 0x17ff, .pci_subdevice = 0x0560, .config = ALC262_BENQ_ED8 }, { .modelname = "auto", .config = ALC262_AUTO }, {} }; static struct alc_config_preset alc262_presets[] = { [ALC262_BASIC] = { .mixers = { alc262_base_mixer }, .init_verbs = { alc262_init_verbs }, .num_dacs = ARRAY_SIZE(alc262_dac_nids), .dac_nids = alc262_dac_nids, .hp_nid = 0x03, .num_channel_mode = ARRAY_SIZE(alc262_modes), .channel_mode = alc262_modes, .input_mux = &alc262_capture_source, }, [ALC262_FUJITSU] = { .mixers = { alc262_fujitsu_mixer }, .init_verbs = { alc262_init_verbs, alc262_fujitsu_unsol_verbs }, .num_dacs = ARRAY_SIZE(alc262_dac_nids), .dac_nids = alc262_dac_nids, .hp_nid = 0x03, .dig_out_nid = ALC262_DIGOUT_NID, .num_channel_mode = ARRAY_SIZE(alc262_modes), .channel_mode = alc262_modes, .input_mux = &alc262_fujitsu_capture_source, .unsol_event = alc262_fujitsu_unsol_event, }, [ALC262_HP_BPC] = { .mixers = { alc262_HP_BPC_mixer }, .init_verbs = { alc262_HP_BPC_init_verbs }, .num_dacs = ARRAY_SIZE(alc262_dac_nids), .dac_nids = alc262_dac_nids, .hp_nid = 0x03, .num_channel_mode = ARRAY_SIZE(alc262_modes), .channel_mode = alc262_modes, .input_mux = &alc262_HP_capture_source, }, [ALC262_BENQ_ED8] = { .mixers = { alc262_base_mixer }, .init_verbs = { alc262_init_verbs, alc262_EAPD_verbs }, .num_dacs = ARRAY_SIZE(alc262_dac_nids), .dac_nids = alc262_dac_nids, .hp_nid = 0x03, .num_channel_mode = ARRAY_SIZE(alc262_modes), .channel_mode = alc262_modes, .input_mux = &alc262_capture_source, }, }; static int patch_alc262(struct hda_codec *codec) { struct alc_spec *spec; int board_config; int err; spec = kcalloc(1, sizeof(*spec), GFP_KERNEL); if (spec == NULL) return -ENOMEM; codec->spec = spec; #if 0 /* pshou 07/11/05 set a zero PCM sample to DAC when FIFO is under-run */ { int tmp; snd_hda_codec_write(codec, 0x1a, 0, AC_VERB_SET_COEF_INDEX, 7); tmp = snd_hda_codec_read(codec, 0x20, 0, AC_VERB_GET_PROC_COEF, 0); snd_hda_codec_write(codec, 0x1a, 0, AC_VERB_SET_COEF_INDEX, 7); snd_hda_codec_write(codec, 0x1a, 0, AC_VERB_SET_PROC_COEF, tmp | 0x80); } #endif board_config = snd_hda_check_board_config(codec, alc262_cfg_tbl); if (board_config < 0 || board_config >= ALC262_MODEL_LAST) { printk(KERN_INFO "hda_codec: Unknown model for ALC262, " "trying auto-probe from BIOS...\n"); board_config = ALC262_AUTO; } if (board_config == ALC262_AUTO) { /* automatic parse from the BIOS config */ err = alc262_parse_auto_config(codec); if (err < 0) { alc_free(codec); return err; } else if (! err) { printk(KERN_INFO "hda_codec: Cannot set up configuration " "from BIOS. Using base mode...\n"); board_config = ALC262_BASIC; } } if (board_config != ALC262_AUTO) setup_preset(spec, &alc262_presets[board_config]); spec->stream_name_analog = "ALC262 Analog"; spec->stream_analog_playback = &alc262_pcm_analog_playback; spec->stream_analog_capture = &alc262_pcm_analog_capture; spec->stream_name_digital = "ALC262 Digital"; spec->stream_digital_playback = &alc262_pcm_digital_playback; spec->stream_digital_capture = &alc262_pcm_digital_capture; if (! spec->adc_nids && spec->input_mux) { /* check whether NID 0x07 is valid */ unsigned int wcap = get_wcaps(codec, 0x07); wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT; /* get type */ if (wcap != AC_WID_AUD_IN) { spec->adc_nids = alc262_adc_nids_alt; spec->num_adc_nids = ARRAY_SIZE(alc262_adc_nids_alt); spec->mixers[spec->num_mixers] = alc262_capture_alt_mixer; spec->num_mixers++; } else { spec->adc_nids = alc262_adc_nids; spec->num_adc_nids = ARRAY_SIZE(alc262_adc_nids); spec->mixers[spec->num_mixers] = alc262_capture_mixer; spec->num_mixers++; } } codec->patch_ops = alc_patch_ops; if (board_config == ALC262_AUTO) spec->init_hook = alc262_auto_init; return 0; } /* * ALC861 channel source setting (2/6 channel selection for 3-stack) */ /* * set the path ways for 2 channel output * need to set the codec line out and mic 1 pin widgets to inputs */ static struct hda_verb alc861_threestack_ch2_init[] = { /* set pin widget 1Ah (line in) for input */ { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 }, /* set pin widget 18h (mic1/2) for input, for mic also enable the vref */ { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 }, { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c }, #if 0 { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8)) }, /*mic*/ { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8)) }, /*line-in*/ #endif { } /* end */ }; /* * 6ch mode * need to set the codec line out and mic 1 pin widgets to outputs */ static struct hda_verb alc861_threestack_ch6_init[] = { /* set pin widget 1Ah (line in) for output (Back Surround)*/ { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 }, /* set pin widget 18h (mic1) for output (CLFE)*/ { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 }, { 0x0c, AC_VERB_SET_CONNECT_SEL, 0x00 }, { 0x0d, AC_VERB_SET_CONNECT_SEL, 0x00 }, { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080 }, #if 0 { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8)) }, /*mic*/ { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8)) }, /*line in*/ #endif { } /* end */ }; static struct hda_channel_mode alc861_threestack_modes[2] = { { 2, alc861_threestack_ch2_init }, { 6, alc861_threestack_ch6_init }, }; /* patch-ALC861 */ static struct snd_kcontrol_new alc861_base_mixer[] = { /* output mixer control */ HDA_CODEC_MUTE("Front Playback Switch", 0x03, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Surround Playback Switch", 0x06, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x05, 1, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x05, 2, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Side Playback Switch", 0x04, 0x0, HDA_OUTPUT), /*Input mixer control */ /* HDA_CODEC_VOLUME("Input Playback Volume", 0x15, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Input Playback Switch", 0x15, 0x0, HDA_OUTPUT), */ HDA_CODEC_VOLUME("CD Playback Volume", 0x15, 0x0, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x15, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Line Playback Volume", 0x15, 0x02, HDA_INPUT), HDA_CODEC_MUTE("Line Playback Switch", 0x15, 0x02, HDA_INPUT), HDA_CODEC_VOLUME("Mic Playback Volume", 0x15, 0x01, HDA_INPUT), HDA_CODEC_MUTE("Mic Playback Switch", 0x15, 0x01, HDA_INPUT), HDA_CODEC_MUTE("Front Mic Playback Switch", 0x10, 0x01, HDA_OUTPUT), HDA_CODEC_MUTE("Headphone Playback Switch", 0x1a, 0x03, HDA_INPUT), /* Capture mixer control */ HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT), { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Capture Source", .count = 1, .info = alc_mux_enum_info, .get = alc_mux_enum_get, .put = alc_mux_enum_put, }, { } /* end */ }; static struct snd_kcontrol_new alc861_3ST_mixer[] = { /* output mixer control */ HDA_CODEC_MUTE("Front Playback Switch", 0x03, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Surround Playback Switch", 0x06, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x05, 1, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x05, 2, 0x0, HDA_OUTPUT), /*HDA_CODEC_MUTE("Side Playback Switch", 0x04, 0x0, HDA_OUTPUT), */ /* Input mixer control */ /* HDA_CODEC_VOLUME("Input Playback Volume", 0x15, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Input Playback Switch", 0x15, 0x0, HDA_OUTPUT), */ HDA_CODEC_VOLUME("CD Playback Volume", 0x15, 0x0, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x15, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Line Playback Volume", 0x15, 0x02, HDA_INPUT), HDA_CODEC_MUTE("Line Playback Switch", 0x15, 0x02, HDA_INPUT), HDA_CODEC_VOLUME("Mic Playback Volume", 0x15, 0x01, HDA_INPUT), HDA_CODEC_MUTE("Mic Playback Switch", 0x15, 0x01, HDA_INPUT), HDA_CODEC_MUTE("Front Mic Playback Switch", 0x10, 0x01, HDA_OUTPUT), HDA_CODEC_MUTE("Headphone Playback Switch", 0x1a, 0x03, HDA_INPUT), /* Capture mixer control */ HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT), { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Capture Source", .count = 1, .info = alc_mux_enum_info, .get = alc_mux_enum_get, .put = alc_mux_enum_put, }, { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Channel Mode", .info = alc_ch_mode_info, .get = alc_ch_mode_get, .put = alc_ch_mode_put, .private_value = ARRAY_SIZE(alc861_threestack_modes), }, { } /* end */ }; /* * generic initialization of ADC, input mixers and output mixers */ static struct hda_verb alc861_base_init_verbs[] = { /* * Unmute ADC0 and set the default input to mic-in */ /* port-A for surround (rear panel) */ { 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 }, { 0x0e, AC_VERB_SET_CONNECT_SEL, 0x00 }, /* port-B for mic-in (rear panel) with vref */ { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 }, /* port-C for line-in (rear panel) */ { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 }, /* port-D for Front */ { 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 }, { 0x0b, AC_VERB_SET_CONNECT_SEL, 0x00 }, /* port-E for HP out (front panel) */ { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 }, /* route front PCM to HP */ { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x01 }, /* port-F for mic-in (front panel) with vref */ { 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 }, /* port-G for CLFE (rear panel) */ { 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 }, { 0x1f, AC_VERB_SET_CONNECT_SEL, 0x00 }, /* port-H for side (rear panel) */ { 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 }, { 0x20, AC_VERB_SET_CONNECT_SEL, 0x00 }, /* CD-in */ { 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 }, /* route front mic to ADC1*/ {0x08, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, /* Unmute DAC0~3 & spdif out*/ {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x06, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Unmute Mixer 14 (mic) 1c (Line in)*/ {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, /* Unmute Stereo Mixer 15 */ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)}, {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c }, //Output 0~12 step {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, // hp used DAC 3 (Front) {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)}, { } }; static struct hda_verb alc861_threestack_init_verbs[] = { /* * Unmute ADC0 and set the default input to mic-in */ /* port-A for surround (rear panel) */ { 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 }, /* port-B for mic-in (rear panel) with vref */ { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 }, /* port-C for line-in (rear panel) */ { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 }, /* port-D for Front */ { 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 }, { 0x0b, AC_VERB_SET_CONNECT_SEL, 0x00 }, /* port-E for HP out (front panel) */ { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 }, /* route front PCM to HP */ { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x01 }, /* port-F for mic-in (front panel) with vref */ { 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 }, /* port-G for CLFE (rear panel) */ { 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 }, /* port-H for side (rear panel) */ { 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 }, /* CD-in */ { 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 }, /* route front mic to ADC1*/ {0x08, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, /* Unmute DAC0~3 & spdif out*/ {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x06, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Unmute Mixer 14 (mic) 1c (Line in)*/ {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, /* Unmute Stereo Mixer 15 */ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)}, {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c }, //Output 0~12 step {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, // hp used DAC 3 (Front) {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)}, { } }; /* * generic initialization of ADC, input mixers and output mixers */ static struct hda_verb alc861_auto_init_verbs[] = { /* * Unmute ADC0 and set the default input to mic-in */ // {0x08, AC_VERB_SET_CONNECT_SEL, 0x00}, {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, /* Unmute DAC0~3 & spdif out*/ {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, {0x06, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Unmute Mixer 14 (mic) 1c (Line in)*/ {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, /* Unmute Stereo Mixer 15 */ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)}, {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c}, {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)}, {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)}, {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, {0x08, AC_VERB_SET_CONNECT_SEL, 0x00}, // set Mic 1 { } }; /* pcm configuration: identiacal with ALC880 */ #define alc861_pcm_analog_playback alc880_pcm_analog_playback #define alc861_pcm_analog_capture alc880_pcm_analog_capture #define alc861_pcm_digital_playback alc880_pcm_digital_playback #define alc861_pcm_digital_capture alc880_pcm_digital_capture #define ALC861_DIGOUT_NID 0x07 static struct hda_channel_mode alc861_8ch_modes[1] = { { 8, NULL } }; static hda_nid_t alc861_dac_nids[4] = { /* front, surround, clfe, side */ 0x03, 0x06, 0x05, 0x04 }; static hda_nid_t alc660_dac_nids[3] = { /* front, clfe, surround */ 0x03, 0x05, 0x06 }; static hda_nid_t alc861_adc_nids[1] = { /* ADC0-2 */ 0x08, }; static struct hda_input_mux alc861_capture_source = { .num_items = 5, .items = { { "Mic", 0x0 }, { "Front Mic", 0x3 }, { "Line", 0x1 }, { "CD", 0x4 }, { "Mixer", 0x5 }, }, }; /* fill in the dac_nids table from the parsed pin configuration */ static int alc861_auto_fill_dac_nids(struct alc_spec *spec, const struct auto_pin_cfg *cfg) { int i; hda_nid_t nid; spec->multiout.dac_nids = spec->private_dac_nids; for (i = 0; i < cfg->line_outs; i++) { nid = cfg->line_out_pins[i]; if (nid) { if (i >= ARRAY_SIZE(alc861_dac_nids)) continue; spec->multiout.dac_nids[i] = alc861_dac_nids[i]; } } spec->multiout.num_dacs = cfg->line_outs; return 0; } /* add playback controls from the parsed DAC table */ static int alc861_auto_create_multi_out_ctls(struct alc_spec *spec, const struct auto_pin_cfg *cfg) { char name[32]; static const char *chname[4] = { "Front", "Surround", NULL /*CLFE*/, "Side" }; hda_nid_t nid; int i, idx, err; for (i = 0; i < cfg->line_outs; i++) { nid = spec->multiout.dac_nids[i]; if (! nid) continue; if (nid == 0x05) { /* Center/LFE */ if ((err = add_control(spec, ALC_CTL_BIND_MUTE, "Center Playback Switch", HDA_COMPOSE_AMP_VAL(nid, 1, 0, HDA_OUTPUT))) < 0) return err; if ((err = add_control(spec, ALC_CTL_BIND_MUTE, "LFE Playback Switch", HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT))) < 0) return err; } else { for (idx = 0; idx < ARRAY_SIZE(alc861_dac_nids) - 1; idx++) if (nid == alc861_dac_nids[idx]) break; sprintf(name, "%s Playback Switch", chname[idx]); if ((err = add_control(spec, ALC_CTL_BIND_MUTE, name, HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0) return err; } } return 0; } static int alc861_auto_create_hp_ctls(struct alc_spec *spec, hda_nid_t pin) { int err; hda_nid_t nid; if (! pin) return 0; if ((pin >= 0x0b && pin <= 0x10) || pin == 0x1f || pin == 0x20) { nid = 0x03; if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Headphone Playback Switch", HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0) return err; spec->multiout.hp_nid = nid; } return 0; } /* create playback/capture controls for input pins */ static int alc861_auto_create_analog_input_ctls(struct alc_spec *spec, const struct auto_pin_cfg *cfg) { struct hda_input_mux *imux = &spec->private_imux; int i, err, idx, idx1; for (i = 0; i < AUTO_PIN_LAST; i++) { switch(cfg->input_pins[i]) { case 0x0c: idx1 = 1; idx = 2; // Line In break; case 0x0f: idx1 = 2; idx = 2; // Line In break; case 0x0d: idx1 = 0; idx = 1; // Mic In break; case 0x10: idx1 = 3; idx = 1; // Mic In break; case 0x11: idx1 = 4; idx = 0; // CD break; default: continue; } err = new_analog_input(spec, cfg->input_pins[i], auto_pin_cfg_labels[i], idx, 0x15); if (err < 0) return err; imux->items[imux->num_items].label = auto_pin_cfg_labels[i]; imux->items[imux->num_items].index = idx1; imux->num_items++; } return 0; } static struct snd_kcontrol_new alc861_capture_mixer[] = { HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT), { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, /* The multiple "Capture Source" controls confuse alsamixer * So call somewhat different.. *FIXME: the controls appear in the "playback" view! */ /* .name = "Capture Source", */ .name = "Input Source", .count = 1, .info = alc_mux_enum_info, .get = alc_mux_enum_get, .put = alc_mux_enum_put, }, { } /* end */ }; static void alc861_auto_set_output_and_unmute(struct hda_codec *codec, hda_nid_t nid, int pin_type, int dac_idx) { /* set as output */ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, pin_type); snd_hda_codec_write(codec, dac_idx, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE); } static void alc861_auto_init_multi_out(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; int i; for (i = 0; i < spec->autocfg.line_outs; i++) { hda_nid_t nid = spec->autocfg.line_out_pins[i]; if (nid) alc861_auto_set_output_and_unmute(codec, nid, PIN_OUT, spec->multiout.dac_nids[i]); } } static void alc861_auto_init_hp_out(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; hda_nid_t pin; pin = spec->autocfg.hp_pin; if (pin) /* connect to front */ alc861_auto_set_output_and_unmute(codec, pin, PIN_HP, spec->multiout.dac_nids[0]); } static void alc861_auto_init_analog_input(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; int i; for (i = 0; i < AUTO_PIN_LAST; i++) { hda_nid_t nid = spec->autocfg.input_pins[i]; if ((nid>=0x0c) && (nid <=0x11)) { snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, i <= AUTO_PIN_FRONT_MIC ? PIN_VREF80 : PIN_IN); } } } /* parse the BIOS configuration and set up the alc_spec */ /* return 1 if successful, 0 if the proper config is not found, or a negative error code */ static int alc861_parse_auto_config(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; int err; static hda_nid_t alc861_ignore[] = { 0x1d, 0 }; if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, alc861_ignore)) < 0) return err; if (! spec->autocfg.line_outs) return 0; /* can't find valid BIOS pin config */ if ((err = alc861_auto_fill_dac_nids(spec, &spec->autocfg)) < 0 || (err = alc861_auto_create_multi_out_ctls(spec, &spec->autocfg)) < 0 || (err = alc861_auto_create_hp_ctls(spec, spec->autocfg.hp_pin)) < 0 || (err = alc861_auto_create_analog_input_ctls(spec, &spec->autocfg)) < 0) return err; spec->multiout.max_channels = spec->multiout.num_dacs * 2; if (spec->autocfg.dig_out_pin) spec->multiout.dig_out_nid = ALC861_DIGOUT_NID; if (spec->kctl_alloc) spec->mixers[spec->num_mixers++] = spec->kctl_alloc; spec->init_verbs[spec->num_init_verbs++] = alc861_auto_init_verbs; spec->num_mux_defs = 1; spec->input_mux = &spec->private_imux; spec->adc_nids = alc861_adc_nids; spec->num_adc_nids = ARRAY_SIZE(alc861_adc_nids); spec->mixers[spec->num_mixers] = alc861_capture_mixer; spec->num_mixers++; return 1; } /* additional initialization for auto-configuration model */ static void alc861_auto_init(struct hda_codec *codec) { alc861_auto_init_multi_out(codec); alc861_auto_init_hp_out(codec); alc861_auto_init_analog_input(codec); } /* * configuration and preset */ static struct hda_board_config alc861_cfg_tbl[] = { { .modelname = "3stack", .config = ALC861_3ST }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xd600, .config = ALC861_3ST }, { .modelname = "3stack-660", .config = ALC660_3ST }, { .pci_subvendor = 0x1043, .pci_subdevice = 0x81e7, .config = ALC660_3ST }, { .modelname = "3stack-dig", .config = ALC861_3ST_DIG }, { .modelname = "6stack-dig", .config = ALC861_6ST_DIG }, { .modelname = "auto", .config = ALC861_AUTO }, {} }; static struct alc_config_preset alc861_presets[] = { [ALC861_3ST] = { .mixers = { alc861_3ST_mixer }, .init_verbs = { alc861_threestack_init_verbs }, .num_dacs = ARRAY_SIZE(alc861_dac_nids), .dac_nids = alc861_dac_nids, .num_channel_mode = ARRAY_SIZE(alc861_threestack_modes), .channel_mode = alc861_threestack_modes, .need_dac_fix = 1, .num_adc_nids = ARRAY_SIZE(alc861_adc_nids), .adc_nids = alc861_adc_nids, .input_mux = &alc861_capture_source, }, [ALC861_3ST_DIG] = { .mixers = { alc861_base_mixer }, .init_verbs = { alc861_threestack_init_verbs }, .num_dacs = ARRAY_SIZE(alc861_dac_nids), .dac_nids = alc861_dac_nids, .dig_out_nid = ALC861_DIGOUT_NID, .num_channel_mode = ARRAY_SIZE(alc861_threestack_modes), .channel_mode = alc861_threestack_modes, .need_dac_fix = 1, .num_adc_nids = ARRAY_SIZE(alc861_adc_nids), .adc_nids = alc861_adc_nids, .input_mux = &alc861_capture_source, }, [ALC861_6ST_DIG] = { .mixers = { alc861_base_mixer }, .init_verbs = { alc861_base_init_verbs }, .num_dacs = ARRAY_SIZE(alc861_dac_nids), .dac_nids = alc861_dac_nids, .dig_out_nid = ALC861_DIGOUT_NID, .num_channel_mode = ARRAY_SIZE(alc861_8ch_modes), .channel_mode = alc861_8ch_modes, .num_adc_nids = ARRAY_SIZE(alc861_adc_nids), .adc_nids = alc861_adc_nids, .input_mux = &alc861_capture_source, }, [ALC660_3ST] = { .mixers = { alc861_3ST_mixer }, .init_verbs = { alc861_threestack_init_verbs }, .num_dacs = ARRAY_SIZE(alc660_dac_nids), .dac_nids = alc660_dac_nids, .num_channel_mode = ARRAY_SIZE(alc861_threestack_modes), .channel_mode = alc861_threestack_modes, .need_dac_fix = 1, .num_adc_nids = ARRAY_SIZE(alc861_adc_nids), .adc_nids = alc861_adc_nids, .input_mux = &alc861_capture_source, }, }; static int patch_alc861(struct hda_codec *codec) { struct alc_spec *spec; int board_config; int err; spec = kcalloc(1, sizeof(*spec), GFP_KERNEL); if (spec == NULL) return -ENOMEM; codec->spec = spec; board_config = snd_hda_check_board_config(codec, alc861_cfg_tbl); if (board_config < 0 || board_config >= ALC861_MODEL_LAST) { printk(KERN_INFO "hda_codec: Unknown model for ALC861, " "trying auto-probe from BIOS...\n"); board_config = ALC861_AUTO; } if (board_config == ALC861_AUTO) { /* automatic parse from the BIOS config */ err = alc861_parse_auto_config(codec); if (err < 0) { alc_free(codec); return err; } else if (! err) { printk(KERN_INFO "hda_codec: Cannot set up configuration " "from BIOS. Using base mode...\n"); board_config = ALC861_3ST_DIG; } } if (board_config != ALC861_AUTO) setup_preset(spec, &alc861_presets[board_config]); spec->stream_name_analog = "ALC861 Analog"; spec->stream_analog_playback = &alc861_pcm_analog_playback; spec->stream_analog_capture = &alc861_pcm_analog_capture; spec->stream_name_digital = "ALC861 Digital"; spec->stream_digital_playback = &alc861_pcm_digital_playback; spec->stream_digital_capture = &alc861_pcm_digital_capture; codec->patch_ops = alc_patch_ops; if (board_config == ALC861_AUTO) spec->init_hook = alc861_auto_init; return 0; } /* * patch entries */ struct hda_codec_preset snd_hda_preset_realtek[] = { { .id = 0x10ec0260, .name = "ALC260", .patch = patch_alc260 }, { .id = 0x10ec0262, .name = "ALC262", .patch = patch_alc262 }, { .id = 0x10ec0880, .name = "ALC880", .patch = patch_alc880 }, { .id = 0x10ec0882, .name = "ALC882", .patch = patch_alc882 }, { .id = 0x10ec0883, .name = "ALC883", .patch = patch_alc883 }, { .id = 0x10ec0885, .name = "ALC885", .patch = patch_alc882 }, { .id = 0x10ec0888, .name = "ALC888", .patch = patch_alc883 }, { .id = 0x10ec0861, .rev = 0x100300, .name = "ALC861", .patch = patch_alc861 }, { .id = 0x10ec0861, .rev = 0x100340, .name = "ALC660", .patch = patch_alc861 }, {} /* terminator */ };