Commit graph

1118 commits

Author SHA1 Message Date
Linus Torvalds
e317234975 Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
 - V4L2 API additions to better support JPEG compression control
 - media API additions to properly support MPEG decoders
 - V4L2 API additions for image crop/scaling
 - a few other V4L2 API DocBook fixes/improvements
 - two new DVB frontend drivers: m88rs2000 and rtl2830
 - two new DVB drivers: az6007 and rtl28xxu
 - a framework for ISA drivers, that removed lots of common code found
   at the ISA radio drivers
 - a new FM transmitter driver (radio-keene)
 - a GPIO-based IR receiver driver
 - a new sensor driver: mt9m032
 - some new video drivers: adv7183, blackfin, mx2_emmaprp, sii9234_drv,
   vs6624
 - several new board additions, driver fixes, improvements and cleanups.

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (295 commits)
  [media] update CARDLIST.em28xx
  [media] partially reverts changeset fa5527c
  [media] stb0899: fix the limits for signal strength values
  [media] em28xx: support for 2304:0242 PCTV QuatroStick (510e)
  [media] em28xx: support for 2013:0251 PCTV QuatroStick nano (520e)
  [media] -EINVAL -> -ENOTTY
  [media] gspca - sn9c20x: Cleanup source
  [media] gspca - sn9c20x: Simplify register write for capture start/stop
  [media] gspca - sn9c20x: Add automatic JPEG compression mechanism
  [media] gspca - sn9c20x: Greater delay in case of sensor no response
  [media] gspca - sn9c20x: Optimize the code of write sequences
  [media] gspca - sn9c20x: Add the JPEG compression quality control
  [media] gspca - sn9c20x: Add a delay after Omnivision sensor reset
  [media] gspca - sn9c20x: Propagate USB errors to higher level
  [media] gspca - sn9c20x: Use the new video control mechanism
  [media] gspca - sn9c20x: Fix loss of frame start
  [media] gspca - zc3xx: Lack of register 08 value for sensor cs2102k
  [media] gspca - ov534_9: Add brightness to OmniVision 5621 sensor
  [media] gspca - zc3xx: Add V4L2_CID_JPEG_COMPRESSION_QUALITY control support
  [media] pvrusb2: fix 7MHz & 8MHz DVB-T tuner support for HVR1900 rev D1F5
  ...
2012-03-23 14:39:09 -07:00
Linus Torvalds
7bfe0e66d5 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input subsystem updates from Dmitry Torokhov:
 "- we finally merged driver for USB version of Synaptics touchpads
    (I guess most commonly found in IBM/Lenovo keyboard/touchpad combo);

   - a bunch of new drivers for embedded platforms (Cypress
     touchscreens, DA9052 OnKey, MAX8997-haptic, Ilitek ILI210x
     touchscreens, TI touchscreen);

   - input core allows clients to specify desired clock source for
     timestamps on input events (EVIOCSCLOCKID ioctl);

   - input core allows querying state of all MT slots for given event
     code via EVIOCGMTSLOTS ioctl;

   - various driver fixes and improvements."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits)
  Input: ili210x - add support for Ilitek ILI210x based touchscreens
  Input: altera_ps2 - use of_match_ptr()
  Input: synaptics_usb - switch to module_usb_driver()
  Input: convert I2C drivers to use module_i2c_driver()
  Input: convert SPI drivers to use module_spi_driver()
  Input: omap4-keypad - move platform_data to <linux/platform_data>
  Input: kxtj9 - who_am_i check value and initial data rate fixes
  Input: add driver support for MAX8997-haptic
  Input: tegra-kbc - revise device tree support
  Input: of_keymap - add device tree bindings for simple key matrices
  Input: wacom - fix physical size calculation for 3rd-gen Bamboo
  Input: twl4030-vibra - really switch from #if to #ifdef
  Input: hp680_ts_input - ensure arguments to request_irq and free_irq are compatible
  Input: max8925_onkey - avoid accessing input device too early
  Input: max8925_onkey - allow to be used as a wakeup source
  Input: atmel-wm97xx - convert to dev_pm_ops
  Input: atmel-wm97xx - set driver owner
  Input: add cyttsp touchscreen maintainer entry
  Input: cyttsp - remove useless checks in cyttsp_probe()
  Input: usbtouchscreen - add support for Data Modul EasyTouch TP 72037
  ...
2012-03-22 20:20:18 -07:00
Linus Torvalds
d464c92b52 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID updates from Jiri Kosina:
 "It contains HID driver updates all over the place -- a lot of new
  hardware support especially in the multitouch area, including generic
  handling of all multitouch devices by the hid-multitiouch driver
  automatically."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (42 commits)
  HID: multitouch: add PID for Fructel product
  HID: wacom: Add reporting of wheel for Intuos4 WL
  HID: wacom: Replace __set_bit with input_set_capability
  HID: tivo: add support for BT-version (0x1200)
  HID: wacom: Reset stylus buttons - Intuos4 WL
  HID: multitouch: detect serial protocol
  HID: handle all multitouch devices through hid-multitouch
  HID: multitouch: fix handling of buggy reports descriptors for Dell ST2220T
  HID: make it possible to force hid-core claim the device
  HID: multitouch: add support for eGalax 0x722a
  HID: usbhid: add quirk no_get for quanta 3008 devices
  HID: multitouch: add more eGalax devices
  HID: multitouch: add new PID from Ideacom
  HID: multitouch: add support for Atmel maXTouch 03eb:2118
  HID: waltop: Add support for tablet with PID 0038
  HID: waltop: Replace original rdescs with links
  HID: uclogic: Replace original rdescs with links
  HID: wacom: Add pad buttons reporting on Intuos4 WL
  HID: wacom: report distance for Intuos4 WL
  HID: kye: Add support for 3 tablets
  ...
2012-03-20 21:11:42 -07:00
Linus Torvalds
4a52246302 driver core merge for 3.4-rc1
Here's the big driver core merge for 3.4-rc1.
 
 Lots of various things here, sysfs fixes/tweaks (with the nlink breakage
 reverted), dynamic debugging updates, w1 drivers, hyperv driver updates,
 and a variety of other bits and pieces, full information in the
 shortlog.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iEYEABECAAYFAk9neCsACgkQMUfUDdst+ylyQwCfY2eizvzw5HhjQs8gOiBRDADe
 yrgAnj1Zan2QkoCnQIFJNAoxqNX9yAhd
 =biH6
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core patches for 3.4-rc1 from Greg KH:
 "Here's the big driver core merge for 3.4-rc1.

  Lots of various things here, sysfs fixes/tweaks (with the nlink
  breakage reverted), dynamic debugging updates, w1 drivers, hyperv
  driver updates, and a variety of other bits and pieces, full
  information in the shortlog."

* tag 'driver-core-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (78 commits)
  Tools: hv: Support enumeration from all the pools
  Tools: hv: Fully support the new KVP verbs in the user level daemon
  Drivers: hv: Support the newly introduced KVP messages in the driver
  Drivers: hv: Add new message types to enhance KVP
  regulator: Support driver probe deferral
  Revert "sysfs: Kill nlink counting."
  uevent: send events in correct order according to seqnum (v3)
  driver core: minor comment formatting cleanups
  driver core: move the deferred probe pointer into the private area
  drivercore: Add driver probe deferral mechanism
  DS2781 Maxim Stand-Alone Fuel Gauge battery and w1 slave drivers
  w1_bq27000: Only one thread can access the bq27000 at a time.
  w1_bq27000 - remove w1_bq27000_write
  w1_bq27000: remove unnecessary NULL test.
  sysfs: Fix memory leak in sysfs_sd_setsecdata().
  intel_idle: Revert change of auto_demotion_disable_flags for Nehalem
  w1: Fix w1_bq27000
  driver-core: documentation: fix up Greg's email address
  powernow-k6: Really enable auto-loading
  powernow-k7: Fix CPU family number
  ...
2012-03-20 11:16:20 -07:00
Jiri Kosina
4a247a4119 Merge branch 'upstream' into for-linus
Conflicts:
	drivers/hid/Makefile
2012-03-20 13:18:05 +01:00
Andreas Nielsen
4d5df5d11e HID: multitouch: add PID for Fructel product
Adds multitouch support for the Gametel Android game controller.

The multitouch events are emulated by the Gametel device. Each physical button
is configured to generate a MT event on a specific coordinate. This seems to be
the only way for us to support Android games that doesn't support HID gamepads.
It is possible to inject MT events at Android level, but this requires root on
the phone.

Signed-off-by: Andreas Nielsen <eas@svep.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-20 13:17:22 +01:00
Jiri Kosina
77aa8e65f0 Merge branches 'roccat' and 'wacom' into for-linus 2012-03-20 13:05:18 +01:00
Jiri Kosina
3abee3526d Merge branches 'battery-scope', 'logitech' and 'multitouch' into for-linus 2012-03-20 13:04:25 +01:00
Mauro Carvalho Chehab
9ce28d827f Merge tag 'v3.3' into staging/for_v3.4
* tag 'v3.3': (1646 commits)
  Linux 3.3
  Don't limit non-nested epoll paths
  netfilter: ctnetlink: fix race between delete and timeout expiration
  ipv6: Don't dev_hold(dev) in ip6_mc_find_dev_rcu.
  nilfs2: fix NULL pointer dereference in nilfs_load_super_block()
  nilfs2: clamp ns_r_segments_percentage to [1, 99]
  afs: Remote abort can cause BUG in rxrpc code
  afs: Read of file returns EBADMSG
  C6X: remove dead code from entry.S
  wimax/i2400m: fix erroneous NETDEV_TX_BUSY use
  net/hyperv: fix erroneous NETDEV_TX_BUSY use
  net/usbnet: reserve headroom on rx skbs
  bnx2x: fix memory leak in bnx2x_init_firmware()
  bnx2x: fix a crash on corrupt firmware file
  sch_sfq: revert dont put new flow at the end of flows
  ipv6: fix icmp6_dst_alloc()
  MAINTAINERS: Add Serge as maintainer of capabilities
  drivers/video/backlight/s6e63m0.c: fix corruption storing gamma mode
  MAINTAINERS: add entry for exynos mipi display drivers
  MAINTAINERS: fix link to Gustavo Padovans tree
  ...
2012-03-19 13:41:24 -03:00
Przemo Firszt
7e503a37de HID: wacom: Add reporting of wheel for Intuos4 WL
This patch adds reporting of ABS_WHEEL event. Raported walues are 0..71
and are related to absolute location of the finger on the wheel.

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Reviewed-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-16 12:15:31 +01:00
Przemo Firszt
9a911da8d7 HID: wacom: Replace __set_bit with input_set_capability
It's a trivial patch. It's doesn't change the functionality as the helper
input_set_capability does the same thing.

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-16 12:14:54 +01:00
Jiri Kosina
740363fb75 HID: tivo: add support for BT-version (0x1200)
Add support for BT-driven configuration of the TiVo remote.

Reported-by: Joshua Dillon <jvdillon@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-13 09:36:05 +01:00
Przemo Firszt
693f45bb2d HID: wacom: Reset stylus buttons - Intuos4 WL
Stylus buttons have to be resetted when going out-of-prox.

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Reviewed-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-12 15:52:28 +01:00
Benjamin Tissoires
9e87f22ac6 HID: multitouch: detect serial protocol
Microsoft's documentation about multitouch protocols tells that
if a device presents one touch per report, then it should be treated
as a serial protocol.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-12 12:50:27 +01:00
Benjamin Tissoires
8d179a9ef2 HID: handle all multitouch devices through hid-multitouch
When the quirk HID_QUIRK_MULTITOUCH is present and when hid-multitouch
is loaded, let's pass the device to hid-multitouch even if it has
not been registered in hid-multitouch.

If any other driver wants to take precedence over hid-multitouch,
the usual way of adding it to hid_have_special_driver will work as
the quirk HID_QUIRK_MULTITOUCH won't be set by the generic hid layer.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-12 11:27:07 +01:00
Benjamin Tissoires
ed9d5c9614 HID: multitouch: fix handling of buggy reports descriptors for Dell ST2220T
LG multitouch panels, such as the one found in Dell ST2220T, has buggy
reports descriptors. With the previous implementation, it was impossible
to rely on the reports descriptors to determine how the different
touches are emitted from the device.

This patch changes the splitting of the different touches in the report
in a more robust way.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-12 11:23:55 +01:00
Greg Kroah-Hartman
263a5c8e16 Merge 3.3-rc6 into driver-core-next
This was done to resolve a conflict in the drivers/base/cpu.c file.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09 12:35:53 -08:00
Dmitry Torokhov
b675b3667f Merge commit 'v3.3-rc6' into next 2012-03-09 10:55:17 -08:00
Jiri Kosina
6b1968d5b6 HID: make it possible to force hid-core claim the device
Introduce 'hid_ignore_special_drivers' module parameter that makes hid-core
claim the device even if it's listed in hid_have_special_driver[]. This
is useful mostly for debugging purposes and specialized initrds, where
all the hid drivers are not avaiable.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-09 13:55:43 +01:00
Benjamin Tissoires
2ce09df47b HID: multitouch: add support for eGalax 0x722a
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-09 13:27:53 +01:00
Benjamin Tissoires
8d31321ca5 HID: usbhid: add quirk no_get for quanta 3008 devices
Some quanta devices do not like to be polled for reports
descriptors, thus this quirk.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-06 14:09:25 +01:00
Benjamin Tissoires
fd1d152583 HID: multitouch: add more eGalax devices
This is a list of devices that should be handled by hid-multitouch.  They all
present the HID usage "Contact ID" and won't be handled by hid-input.  Some of
them have _not_ been tested (though I have their report descriptors), but I've
been guaranted by eeti that they follow the same protocol.  The tested ones are
also blacklisted in hid-core.c.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-06 14:09:24 +01:00
Benjamin Tissoires
71078b0deb HID: multitouch: add new PID from Ideacom
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-06 14:09:24 +01:00
Benjamin Tissoires
841cb1570d HID: multitouch: add support for Atmel maXTouch 03eb:2118
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-06 14:09:24 +01:00
Nikolai Kondrashov
a786e83cb0 HID: waltop: Add support for tablet with PID 0038
Add support for unknown Waltop tablet with product ID 0x0038.
This tablet is sold as Genius G-Pen F509.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-06 11:20:55 +01:00
Nikolai Kondrashov
56d27dd6ec HID: waltop: Replace original rdescs with links
Replace original report descriptor dumps in the comments with links to tablet
descriptions in a wiki, to make code clearer.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-06 11:20:54 +01:00
Nikolai Kondrashov
51153a78df HID: uclogic: Replace original rdescs with links
Replace original report descriptor dumps in the comments with links to tablet
descriptions in a wiki, to make code clearer.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-06 11:20:54 +01:00
Nikolai Kondrashov
883e0e3662 HID: hid-input: allow array fields out of range
Allow array field values out of range as per HID 1.11 specification,
section 6.2.25:

	Rather than returning a single bit for each button in the group, an
	array returns an index in each field that corresponds to the pressed
	button (like keyboard scan codes). An out-of range value in and array
	field is considered no controls asserted.

Apparently, "and" above is a typo and should be "an".

This fixes at least Waltop tablet pen clicks - otherwise BTN_TOUCH is never
released.

The relevant part of Waltop tablet report descriptors is this:

	0x09, 0x42,         /*          Usage (Tip Switch),         */
	0x09, 0x44,         /*          Usage (Barrel Switch),      */
	0x09, 0x46,         /*          Usage (Tablet Pick),        */
	0x15, 0x01,         /*          Logical Minimum (1),        */
	0x25, 0x03,         /*          Logical Maximum (3),        */
	0x75, 0x04,         /*          Report Size (4),            */
	0x95, 0x01,         /*          Report Count (1),           */
	0x80,               /*          Input,                      */

This is a regression fix for commit b4b583d ("HID: be more strict when
ignoring out-of-range fields").

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-05 10:28:58 +01:00
Przemo Firszt
6245bde29d HID: wacom: Add pad buttons reporting on Intuos4 WL
This patch adds reporting of 1 wheel button and 8 strip buttons for Intuos4 WL.
The buttons are reported as BTN_0 to BTN_9. The change of type butstate variable
is required as the old type 'char' couldn't store state of 9 buttons. The change
is not affecting Graphire tablet as it only uses first 2 bits of 'butstate'.

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Acked-by:Ping Cheng <pinglinux@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-01 09:25:08 +01:00
Przemo Firszt
e0829e9c1e HID: wacom: report distance for Intuos4 WL
This patch adds reporting of distance of tool to the tablet surface. Maximum
reported value is 63 (0x3F).

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-01 09:24:29 +01:00
Nikolai Kondrashov
22ca20b250 HID: kye: Add support for 3 tablets
Add support for three KYE tablets: EasyPen i405X, MousePen i608X, EasyPen M610X.
Update Kconfig entry accordingly, remove EXPERT dependency.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-28 13:37:12 +01:00
Alan Stern
37891abc84 HID: usbhid: Add NOGET quirk for the AIREN Slim+ keyboard
This patch (as1531) adds a NOGET quirk for the Slim+ keyboard marketed
by AIREN.  This keyboard seems to have a lot of bugs; NOGET works
around only one of them.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: okias <d.okias@gmail.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-27 17:35:43 +01:00
Przemo Firszt
2470900b68 HID: wacom: Add serial and id reporting for Wacom Intuos4 WL
This patch implements reporting id and serial number of used tool.
Reported values are the same as for USB on of the driver for wacom Intuos4 WL

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-27 15:29:07 +01:00
Przemo Firszt
2c653e6bac HID: wacom: set ABS_MISC bit for Intuos4 WL
ABS_MISC has to be set for Intuos4 WL otherwise xorg driver won't use proper
protocol and the information about tool id and serial is lost.

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-27 15:29:07 +01:00
Jiri Kosina
c7fd7937ba HID: correct PID for saitek PS1000
Reported-by: Andreas Hübner <andreas@k4n.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-22 18:33:43 +01:00
Andreas Hübner
1e93674a8e HID: add new driver for non-compliant Saitek devices
The driver currently only supports the PS1000 controller.
It fixes the report descriptor by removing a non-existing axis and
clearing the constant bit on the d-pad and button input reports.

Signed-off-by: Andreas Hübner <andreas@k4n.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-22 11:30:17 +01:00
Konstantin Khlebnikov
0944e964b2 HID: use generic driver for Logitech Unifying receivers if !CONFIG_HID_LOGITECH_DJ
Before commit 534a7b8e1 ("HID: Add full support for Logitech Unifying
receivers") Logitech Unifying receiver can work as generic device
without special driver, after that commit these devices does not works
without special driver.

After this patch they will use generic driver if special driver is disabled.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-21 16:00:31 +01:00
Przemo Firszt
32db737fb2 HID: wacom: fix proximity tool release
Don't zero the current tool before reporting its release to the input
subsystem.

Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Tested-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-21 14:23:26 +01:00
Sean Young
42fc04e5f8 HID: sjoy: Add device ID for Super Joy Box 3
Also correct the quirks for the Super Joy Box 3 Pro and Super Dual Box.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-21 14:16:36 +01:00
Przemo Firszt
a72c5ddb67 HID: wacom: Force new name for Wacom Intuos4 WL PTK-540WL
The name reported by Inutos4 WL connected by bluetooth is "PTK-540WL" and
to make it consistent with other Wacom devices it has to be converted to
"Wacom Intuos4 WL". It also makes userland applications aware that it's
a Wacom device.

This aligns naming of device to same used when this device is plugged into USB
port and controlled by USB wacom driver; and thus helps align userland logic to
route to apps like xf86-input-wacom.

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-21 12:01:34 +01:00
Ville Ranki
724ed328a1 HID: Add quirk for CH Products Fighterstick
CH Fighterstick requires HID_QUIRK_NOGET as many other CH devices do. This
patch adds device id for Fighterstick and adds necessary line to HID quirk
list.

Signed-off-by: Ville Ranki <ville.ranki@iki.fi>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-21 11:58:29 +01:00
Denis Kovalev
2258e863b4 HID: multitouch: add support of Panasonic multitouch panels
While at it, also fix some minor codingstyle issues.

Signed-off-by: Denis Kovalev <Denis.Kovalev@dataart.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-21 11:55:45 +01:00
Chase Douglas
503f7d53b3 HID: hid-magicmouse: Add pointer and buttonpad properties for Magic Trackpad
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-21 11:52:20 +01:00
Hans Verkuil
65dd3b699f [media] hid-core: ignore the Keene FM transmitter
The Keene FM transmitter USB device has the same USB ID as
the Logitech AudioHub Speaker, but it should ignore the hid.
Check if the name is that of the Keene device.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-14 16:40:00 -02:00
Nikolai Kondrashov
4fdc18d151 HID: waltop: Add support for Waltop Q Pad
Add support for Waltop Q Pad by fixing its report descriptor.

This tablet is also sold as Aiptek HyperPen Mini. Other possible names
include: NGS Flexi Style, VisTablet PenPad, iVistaTablet Q Flex Pad, Bravod
Q-PD65-S.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-07 13:51:53 +01:00
Jiri Kosina
217c8b2b19 HID: wiimote: fix invalid power_supply_powers call
Analogically to d7cb3dbd1 ("HID: wacom: Fix invalid power_supply_powers
calls"), fix also the same occurence in wiimote driver.

Reported-by: przemo@firszt.eu
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-07 13:40:56 +01:00
Jiri Kosina
2701eaabd7 HID: tivo: fix broken build
Fix mismatch between Kconfig name and Makefile expectation.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-06 17:36:38 +01:00
Jarod Wilson
44ea35c138 HID: add support for tivo slide remote
This patch finishes off adding full support for the TiVo Slide remote,
which is a mostly pure HID device from the perspective of the kernel.
There are a few mappings that use a vendor-specific usage page, and a
few keys in the consumer usage page that I think make sense to remap
slightly, to better fit their key labels' intended use. Doing this in a
stand-alone hid-tivo.c makes the modifications only matter for this
specific device.

What's actually connected to the computer is a Broadcom-made usb dongle,
which has an embedded hub, bluetooth adapter, mouse and keyboard
devices. You pair with the dongle, then the remote sends data that its
converted into HID on the keyboard interface (the mouse interface
doesn't do anything interesting, so far as I can tell).

lsusb for this device:
Bus 004 Device 005: ID 0a5c:2190 Broadcom Corp.
Bus 004 Device 004: ID 0a5c:4503 Broadcom Corp.
Bus 004 Device 003: ID 150a:1201
Bus 004 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)

Speaking of the keyboard interface, the remote actually does contain a
keyboard as well. The top slides away, revealing a reasonably functional
qwerty keyboard (not unlike many slide cell phones), thus the product
name.

CC: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-06 17:35:03 +01:00
Przemo Firszt
d7cb3dbd10 HID: wacom: Fix invalid power_supply_powers calls
power_supply_powers calls added in 35b4c01e2 ("power_supply: add "powers" links
to self-powered HID devices") have to be called after power device is created.
This patch also fixes the second call - it has to be "ac" instead of "battery"

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-06 16:14:20 +01:00
Jiri Kosina
d4730ace0c Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into upstream-fixes
Sync with Linus' tree. This is necessary to have a base for
patch that fixes commit 35b4c01e29 ("power_supply: add "powers"
links to self-powered HID devices") which went in through Anton's
tree.
2012-02-06 16:12:16 +01:00