Commit graph

86 commits

Author SHA1 Message Date
Yang Hongyang
284901a90a dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:11 -07:00
Yang Hongyang
6a35528a83 dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)
Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:10 -07:00
Huang Weiyi
6c8ad3b07f glge: remove unused #include <version.h>
Remove unused #include <version.h> in drivers/net/qlge/qlge_ethtool.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-02 16:31:46 -07:00
David S. Miller
2d6a5e9500 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/igb/igb_main.c
	drivers/net/qlge/qlge_main.c
	drivers/net/wireless/ath9k/ath9k.h
	drivers/net/wireless/ath9k/core.h
	drivers/net/wireless/ath9k/hw.c
2009-03-17 15:01:30 -07:00
Ron Mercer
855b0993f2 qlge: bugfix: Pad outbound frames smaller than 60 bytes.
With some asic configurations xmit of frames smaller than 60 bytes may
fail.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 11:27:25 -07:00
Ron Mercer
6612a6344a qlge: bugfix: Move netif_napi_del() to common call point.
Moving netif_napi_del() up the call chain so it will get called from all
exit points.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 11:27:24 -07:00
Ron Mercer
a7a655f22c qlge: bugfix: Tell hw to strip vlan header.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 11:27:24 -07:00
Ron Mercer
c3c6496dc3 qlge: bugfix: Increase filter on inbound csum.
Chip does not do UDP checksum when fragmentation occurs.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 11:27:23 -07:00
Ron Mercer
d4a4aba617 qlge: bugfix: Fix endian issue related to rx buffers.
This was introduced in an earlier net-next patch.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10 04:43:58 -07:00
Ron Mercer
74c50b4bae qlge: bugfix: Pad outbound frames smaller than 60 bytes.
With some asic configurations xmit of frames smaller than 60 bytes may
fail.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10 04:43:58 -07:00
Ron Mercer
6b318cb368 qlge: bugfix: Move netif_napi_del() to common call point.
Moving netif_napi_del() up the call chain so it will get called from all
exit points.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10 04:43:56 -07:00
Ron Mercer
39a28bc480 qlge: Remove spinlock from asic init path.
There is nothing to contend with it.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10 04:43:56 -07:00
Ron Mercer
b25215d043 qlge: Clear shadow registers before use.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10 04:43:55 -07:00
Ron Mercer
08b1bc8f4a qlge: Get rid of irqsave/restore in intr disable.
The completion interrupt disable routine is only called from the ISR, so
there is no need for irqsave/restore.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10 04:43:54 -07:00
Ron Mercer
c9cf0a04a0 qlge: bugfix: Tell hw to strip vlan header.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10 04:43:54 -07:00
Ron Mercer
1e213303d8 qlge: Add tx multiqueue support.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10 04:43:53 -07:00
Ron Mercer
22bdd4f599 qlge: Add support for GRO.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10 04:43:53 -07:00
Ron Mercer
d555f5921f qlge: Increase filtering for inbound csum settings.
Chip does not do UDP checksum when fragmentation occurs.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10 04:43:51 -07:00
Ron Mercer
a75ee7f1cc qlge: Remove debug junk from asic reset logic.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10 04:43:49 -07:00
Ron Mercer
db98812f6b qlge: Move reset logic into asic_reset_worker func.
Get rid of extraneous ql_cycle_adapter.  It's only called from the one
place.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10 04:43:48 -07:00
Ron Mercer
fc1f9ea51d qlge: Add support for lost firmware events.
When the firmware is issuing events to the driver the events
must be removed from the queue.  If the queue overflows, the
firmware will build and special event that captures those that
are lost.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03 23:50:49 -08:00
Ron Mercer
bb6676705e qlge: Save status from firmware crash (system err).
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03 23:50:49 -08:00
Ron Mercer
7c92191cb4 qlge: Improve handling for firmware init failure.
This event will arrive at boot time or after an
MPI processor reset if the firmware failed to initialize.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03 23:50:48 -08:00
Ron Mercer
f56b54f542 qlge: Clean up event handler for firmware init.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03 23:50:48 -08:00
Ron Mercer
2ee1e272d1 qlge: Add worker-handler for firmware events.
This worker and it's supporting routines are used for
IDC 'inter-device-communication' events that require
an ACK mailbox command be sent to allow completion
of the request. These requests are originated by
another function wanting to change some common
port paramters. Typical example would be:

1) Change max TX/RX frame size allowed.
2) Change pause parameters.
3) Change loopback mode.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03 23:50:47 -08:00
Ron Mercer
5700abe947 qlge: Clean up link up processing.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03 23:50:46 -08:00
Ron Mercer
11d9fe68ac qlge: Clean up link down processing.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03 23:50:46 -08:00
Ron Mercer
eae6b58fb2 qlge: Add firmware support for insert/remove SFP.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03 23:50:45 -08:00
Ron Mercer
bcc2cb3b97 qlge: Add support for getting/setting port config.
This patch adds functionality to get and set port parameters.
Currently it is used to set maximum TX/RX frame sizes. This process is
also capable of setting:
1) Pause type: Standard or Priority based.
2) Loop back mode.
3) Enable Jumbo frame mode (included here...)

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:45:24 -08:00
Ron Mercer
cdca8d02ea qlge: Add support for device ID 8000.
This device has more firmware support for link management, setting
TX and RX maximum frame sizes.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:45:24 -08:00
Ron Mercer
ca0413b66a qlge: Add support for firmware mailbox commands.
This interface will be used for setting things like maximum
frame size, setting WOL, and ACKing changes requested by the FCOE
function.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:45:23 -08:00
Ron Mercer
4974097a97 qlge: Reduce debug print output.
Get rid of some noise that is for debug only.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-26 22:28:10 -08:00
Ron Mercer
b0c2aadfa4 qlge: Prepare to add new device.
This organizes a few calls into a function table to enable adding new
devices.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-26 22:28:09 -08:00
Ron Mercer
125844eaff qlge: Move firmware event handler.
This is not a logical change but rather a move of the inbound firmware event
handler into it's own function as it will later be called by the outbound
path.
The addition of the mutex is to create exclusive access to the mailbox
commands between inbound and outbound handling.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-26 22:28:08 -08:00
Ron Mercer
a2e809bb1b qlge: Clean up firmware reset path.
Add function for performing the reset rather than in-line. This function
may later be called by a core dump process.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-26 22:28:07 -08:00
Ron Mercer
b82808b759 qlge: Add defines for firmware support.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-26 22:28:06 -08:00
Ron Mercer
4545a3f276 qlge: Use one path to (re)fill rx buffers.
Currently there are two paths for filling rx buffer queues. One is
used during initialization and the other during runtime.  This patch
removes ql_alloc_sbq_buffers() and ql_alloc_lbq_buffers() and replaces
them with a call to the runtime functions ql_update_lbq() and
ql_update_sbq().

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-24 23:50:02 -08:00
Ron Mercer
49f2186d36 qlge: Optimize rx buffer refill process.
RX Buffers are refilled in chunks of 16 at a time before notifying the
hardware with a register write.  This can cause several writes to take
place in a given napi poll call.  This change causes the write to take place
only once at the end of the call.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-24 23:50:01 -08:00
Ron Mercer
8587ea35ca qlge: Change frame route hw semaphore granularity.
Instead of taking/giving the hw semaphore repeatedly when iterating over
several frame to queue route settings, we have the caller hold it until
all are done.
This reduces PCI bus chatter and possible waits.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-24 23:50:01 -08:00
Ron Mercer
cc288f54bb qlge: Increase MAC addr hw sem granularity.
Instead of taking/giving the semaphore repeatedly when iterating over
several adderesses, we have the caller hold it until all are done.  This
reduces PCI bus chatter and possible waits.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-24 23:50:00 -08:00
Ron Mercer
bb58b5b67c qlge: Clean up mac address and frame route settings.
Setting MAC addresses and routing frames to various queues will need to
be done in response to firmware events as well as during initialization.
This change encapsulates the facilities into a single call that can
later me made from other places.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-24 23:50:00 -08:00
David S. Miller
5e30589521 Merge branch 'master' of /home/davem/src/GIT/linux-2.6/
Conflicts:
	drivers/net/wireless/iwlwifi/iwl-agn.c
	drivers/net/wireless/iwlwifi/iwl3945-base.c
2009-02-14 23:12:00 -08:00
Ron Mercer
79d2b29e8a qlge: bugfix: Add missing rx buf clean index on early exit.
The large receive buffer queue is not properly tracking the current
index in the case where an early exit occurs.  This can happen when a
page alloc or dma mapping fails.  If this occurs the queue will get
out of sync and invalid indexes can be written to the hardware.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12 16:38:34 -08:00
Ron Mercer
def48b6e32 qlge: bugfix: Fix RX scaling values.
Receive packets were only scaling across 2 of the receive queues. The
value was hardcoded to 2 instead of being based on how many rx queues
were running.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12 16:38:18 -08:00
Ron Mercer
0d979f74a9 qlge: bugfix: Fix TSO breakage.
Moved the buffer mapping to a point after TSO logic has modified the
iph->check field. We were seeing stale data on the PCIe bus.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12 16:38:03 -08:00
Ron Mercer
06a3d510fa qlge: bugfix: Add missing dev_kfree_skb_any() call.
We put the skb back if we can't get mapping for it.  We don't
want unmapped buffers on our receive buffer queue.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12 16:37:48 -08:00
Ron Mercer
f2603c2c57 qlge: bugfix: Add missing put_page() call.
We put the page back if we can't get mapping for it.  We don't
want unmapped buffers on our receive buffer queue.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12 16:37:32 -08:00
Ron Mercer
6497b607fb qlge: bugfix: Fix fatal error recovery hang.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12 16:37:13 -08:00
Ron Mercer
7a9deb661f qlge: bugfix: Use netif_receive_skb() and vlan_hwaccel_receive_skb().
Replace calls to vlan_hwaccel_rx() and netif_rx().
Thanks to Dave Miller for pointing out the the driver was making
the wrong upcall for passing packets into the stack.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12 16:36:50 -08:00
David S. Miller
b3ff29d2cc Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/Kconfig
2009-02-03 00:15:35 -08:00