Commit graph

1489 commits

Author SHA1 Message Date
Linus Torvalds
1193755ac6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs changes from Al Viro.
 "A lot of misc stuff.  The obvious groups:
   * Miklos' atomic_open series; kills the damn abuse of
     ->d_revalidate() by NFS, which was the major stumbling block for
     all work in that area.
   * ripping security_file_mmap() and dealing with deadlocks in the
     area; sanitizing the neighborhood of vm_mmap()/vm_munmap() in
     general.
   * ->encode_fh() switched to saner API; insane fake dentry in
     mm/cleancache.c gone.
   * assorted annotations in fs (endianness, __user)
   * parts of Artem's ->s_dirty work (jff2 and reiserfs parts)
   * ->update_time() work from Josef.
   * other bits and pieces all over the place.

  Normally it would've been in two or three pull requests, but
  signal.git stuff had eaten a lot of time during this cycle ;-/"

Fix up trivial conflicts in Documentation/filesystems/vfs.txt (the
'truncate_range' inode method was removed by the VM changes, the VFS
update adds an 'update_time()' method), and in fs/btrfs/ulist.[ch] (due
to sparse fix added twice, with other changes nearby).

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (95 commits)
  nfs: don't open in ->d_revalidate
  vfs: retry last component if opening stale dentry
  vfs: nameidata_to_filp(): don't throw away file on error
  vfs: nameidata_to_filp(): inline __dentry_open()
  vfs: do_dentry_open(): don't put filp
  vfs: split __dentry_open()
  vfs: do_last() common post lookup
  vfs: do_last(): add audit_inode before open
  vfs: do_last(): only return EISDIR for O_CREAT
  vfs: do_last(): check LOOKUP_DIRECTORY
  vfs: do_last(): make ENOENT exit RCU safe
  vfs: make follow_link check RCU safe
  vfs: do_last(): use inode variable
  vfs: do_last(): inline walk_component()
  vfs: do_last(): make exit RCU safe
  vfs: split do_lookup()
  Btrfs: move over to use ->update_time
  fs: introduce inode operation ->update_time
  reiserfs: get rid of resierfs_sync_super
  reiserfs: mark the superblock as dirty a bit later
  ...
2012-06-01 10:34:35 -07:00
Mark Brown
14674e7011 i2c: Split I2C_M_NOSTART support out of I2C_FUNC_PROTOCOL_MANGLING
Since there are uses for I2C_M_NOSTART which are much more sensible and
standard than most of the protocol mangling functionality (the main one
being gather writes to devices where something like a register address
needs to be inserted before a block of data) create a new I2C_FUNC_NOSTART
for this feature and update all the users to use it.

Also strengthen the disrecommendation of the protocol mangling while we're
at it.

In the case of regmap-i2c we remove the requirement for mangling as
I2C_M_NOSTART is the only mangling feature which is being used.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-05-30 10:55:34 +02:00
Al Viro
726592a9be mode_t whack-a-mole: ->is_visible() returns umode_t...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-29 23:28:42 -04:00
Ryota Ozaki
f623881872 mm: fix off-by-one bug in print_nodes_state()
/sys/devices/system/node/{online,possible} outputs a garbage byte
because print_nodes_state() returns content size + 1.  To fix the bug,
the patch changes the use of cpuset_sprintf_cpulist to follow the use at
other places, which is clearer and safer.

This bug was introduced in v2.6.24 (commit bde631a518: "mm: add node
states sysfs class attributeS").

Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29 16:22:19 -07:00
Linus Torvalds
da89fb165e dma-buf updates for 3.5
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJPvzQCAAoJEFErWKtxJpJdpNEIAI1sKDywvfuJK0Ik76ICj1Yt
 P//4/ZvROmT8w9u/Jw3BAG7K3u7NLtfht6RcrUFqMULjMUUQ/aymlY9uTbwFZ+so
 WCsVh5tHCULa1oUnAUv8fGMgvGoufD4ZqI/9qbuYLmBtUwPAatul51cEmQyWVvLa
 lJN8PzJ7whfYqNoXpR4SCp8eHY4iJ3DZFDhypdQfZbTgOTrzsoVIJnTdHUXsiRQQ
 E3gB2dRvyihzOD/UFac47af5wVUwtvo1N6NdQ5tJxOX9ZhVGdHaxAqF5FTlWpm6F
 uK100uqFHPbm/TZGtSrGD1ai8L7Hbl//LuzaODjLH9usCiYe6KzSSwf8Alg59Ws=
 =hsWu
 -----END PGP SIGNATURE-----

Merge tag 'tag-for-linus-3.5' of git://git.linaro.org/people/sumitsemwal/linux-dma-buf

Pull dma-buf updates from Sumit Semwal:
 "Here's the first signed-tag pull request for dma-buf framework.  It
  includes the following key items:
   - mmap support
   - vmap support
   - related documentation updates

  These are needed by various drivers to allow mmap/vmap of dma-buf
  shared buffers.  Dave Airlie has some prime patches dependent on the
  vmap pull as well."

* tag 'tag-for-linus-3.5' of git://git.linaro.org/people/sumitsemwal/linux-dma-buf:
  dma-buf: add initial vmap documentation
  dma-buf: minor documentation fixes.
  dma-buf: add vmap interface
  dma-buf: mmap support
2012-05-25 09:37:26 -07:00
Linus Torvalds
d484864dd9 Merge branch 'for-linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping
Pull CMA and ARM DMA-mapping updates from Marek Szyprowski:
 "These patches contain two major updates for DMA mapping subsystem
  (mainly for ARM architecture).  First one is Contiguous Memory
  Allocator (CMA) which makes it possible for device drivers to allocate
  big contiguous chunks of memory after the system has booted.

  The main difference from the similar frameworks is the fact that CMA
  allows to transparently reuse the memory region reserved for the big
  chunk allocation as a system memory, so no memory is wasted when no
  big chunk is allocated.  Once the alloc request is issued, the
  framework migrates system pages to create space for the required big
  chunk of physically contiguous memory.

  For more information one can refer to nice LWN articles:

   - 'A reworked contiguous memory allocator':
		http://lwn.net/Articles/447405/

   - 'CMA and ARM':
		http://lwn.net/Articles/450286/

   - 'A deep dive into CMA':
		http://lwn.net/Articles/486301/

   - and the following thread with the patches and links to all previous
     versions:
		https://lkml.org/lkml/2012/4/3/204

  The main client for this new framework is ARM DMA-mapping subsystem.

  The second part provides a complete redesign in ARM DMA-mapping
  subsystem.  The core implementation has been changed to use common
  struct dma_map_ops based infrastructure with the recent updates for
  new dma attributes merged in v3.4-rc2.  This allows to use more than
  one implementation of dma-mapping calls and change/select them on the
  struct device basis.  The first client of this new infractructure is
  dmabounce implementation which has been completely cut out of the
  core, common code.

  The last patch of this redesign update introduces a new, experimental
  implementation of dma-mapping calls on top of generic IOMMU framework.
  This lets ARM sub-platform to transparently use IOMMU for DMA-mapping
  calls if one provides required IOMMU hardware.

  For more information please refer to the following thread:
		http://www.spinics.net/lists/arm-kernel/msg175729.html

  The last patch merges changes from both updates and provides a
  resolution for the conflicts which cannot be avoided when patches have
  been applied on the same files (mainly arch/arm/mm/dma-mapping.c)."

Acked by Andrew Morton <akpm@linux-foundation.org>:
 "Yup, this one please.  It's had much work, plenty of review and I
  think even Russell is happy with it."

* 'for-linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: (28 commits)
  ARM: dma-mapping: use PMD size for section unmap
  cma: fix migration mode
  ARM: integrate CMA with DMA-mapping subsystem
  X86: integrate CMA with DMA-mapping subsystem
  drivers: add Contiguous Memory Allocator
  mm: trigger page reclaim in alloc_contig_range() to stabilise watermarks
  mm: extract reclaim code from __alloc_pages_direct_reclaim()
  mm: Serialize access to min_free_kbytes
  mm: page_isolation: MIGRATE_CMA isolation functions added
  mm: mmzone: MIGRATE_CMA migration type added
  mm: page_alloc: change fallbacks array handling
  mm: page_alloc: introduce alloc_contig_range()
  mm: compaction: export some of the functions
  mm: compaction: introduce isolate_freepages_range()
  mm: compaction: introduce map_pages()
  mm: compaction: introduce isolate_migratepages_range()
  mm: page_alloc: remove trailing whitespace
  ARM: dma-mapping: add support for IOMMU mapper
  ARM: dma-mapping: use alloc, mmap, free from dma_ops
  ARM: dma-mapping: remove redundant code and do the cleanup
  ...

Conflicts:
	arch/x86/include/asm/dma-mapping.h
2012-05-25 09:18:59 -07:00
Sumit Semwal
12c4727e1d dma-buf: minor documentation fixes.
Some minor inline documentation fixes for gaps resulting from new patches.

Signed-off-by: Sumit Semwal <sumit.semwal@ti.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2012-05-25 12:46:23 +05:30
Dave Airlie
98f86c9e4a dma-buf: add vmap interface
The main requirement I have for this interface is for scanning out
using the USB gpu devices. Since these devices have to read the
framebuffer on updates and linearly compress it, using kmaps
is a major overhead for every update.

v2: fix warn issues pointed out by Sylwester Nawrocki.

v3: fix compile !CONFIG_DMA_SHARED_BUFFER and add _GPL for now

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Rob Clark <rob.clark@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2012-05-25 12:35:24 +05:30
Daniel Vetter
4c78513e45 dma-buf: mmap support
Compared to Rob Clark's RFC I've ditched the prepare/finish hooks
and corresponding ioctls on the dma_buf file. The major reason for
that is that many people seem to be under the impression that this is
also for synchronization with outstanding asynchronous processsing.
I'm pretty massively opposed to this because:

- It boils down reinventing a new rather general-purpose userspace
  synchronization interface. If we look at things like futexes, this
  is hard to get right.
- Furthermore a lot of kernel code has to interact with this
  synchronization primitive. This smells a look like the dri1 hw_lock,
  a horror show I prefer not to reinvent.
- Even more fun is that multiple different subsystems would interact
  here, so we have plenty of opportunities to create funny deadlock
  scenarios.

I think synchronization is a wholesale different problem from data
sharing and should be tackled as an orthogonal problem.

Now we could demand that prepare/finish may only ensure cache
coherency (as Rob intended), but that runs up into the next problem:
We not only need mmap support to facilitate sw-only processing nodes
in a pipeline (without jumping through hoops by importing the dma_buf
into some sw-access only importer), which allows for a nicer
ION->dma-buf upgrade path for existing Android userspace. We also need
mmap support for existing importing subsystems to support existing
userspace libraries. And a loot of these subsystems are expected to
export coherent userspace mappings.

So prepare/finish can only ever be optional and the exporter /needs/
to support coherent mappings. Given that mmap access is always
somewhat fallback-y in nature I've decided to drop this optimization,
instead of just making it optional. If we demonstrate a clear need for
this, supported by benchmark results, we can always add it in again
later as an optional extension.

Other differences compared to Rob's RFC is the above mentioned support
for mapping a dma-buf through facilities provided by the importer.
Which results in mmap support no longer being optional.

Note that this dma-buf mmap patch does _not_ support every possible
insanity an existing subsystem could pull of with mmap: Because it
does not allow to intercept pagefaults and shoot down ptes importing
subsystems can't add some magic of their own at these points (e.g. to
automatically synchronize with outstanding rendering or set up some
special resources). I've done a cursory read through a few mmap
implementions of various subsytems and I'm hopeful that we can avoid
this (and the complexity it'd bring with it).

Additonally I've extended the documentation a bit to explain the hows
and whys of this mmap extension.

In case we ever want to add support for explicitly cache maneged
userspace mmap with a prepare/finish ioctl pair, we could specify that
userspace needs to mmap a different part of the dma_buf, e.g. the
range starting at dma_buf->size up to dma_buf->size*2. This works
because the size of a dma_buf is invariant over it's lifetime. The
exporter would obviously need to fall back to coherent mappings for
both ranges if a legacy clients maps the coherent range and the
architecture cannot suppor conflicting caching policies. Also, this
would obviously be optional and userspace needs to be able to fall
back to coherent mappings.

v2:
- Spelling fixes from Rob Clark.
- Compile fix for !DMA_BUF from Rob Clark.
- Extend commit message to explain how explicitly cache managed mmap
  support could be added later.
- Extend the documentation with implementations notes for exporters
  that need to manually fake coherency.

v3:
- dma_buf pointer initialization goof-up noticed by Rebecca Schultz
  Zavin.

Cc: Rob Clark <rob.clark@linaro.org>
Cc: Rebecca Schultz Zavin <rebecca@android.com>
Acked-by: Rob Clark <rob.clark@linaro.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2012-05-25 12:35:24 +05:30
Linus Torvalds
468f4d1a85 Power management updates for 3.5
* Implementation of opportunistic suspend (autosleep) and user space interface
   for manipulating wakeup sources.
 
 * Hibernate updates from Bojan Smojver and Minho Ban.
 
 * Updates of the runtime PM core and generic PM domains framework related to
   PM QoS.
 
 * Assorted fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQIcBAABAgAGBQJPu+jwAAoJEKhOf7ml8uNsOw0P/0w1FqXD64a1laE43JIlBe9w
 yHEcLHc9MXN+8lS0XQ6jFiL/VC3U5Sj7Ro+DFKcL2MWX//dfDcZcwA9ep/qh4tHV
 tJ987IijdWqJV14pde3xQafhp/9i12rArLxns7S5fzkdfVk0iDjhZZaZy4afFJYM
 SuCsDhCwWefZh89+oLikByiFPnhW+f2ZC9YQeokBM/XvZLtxmOiVfL6duloT/Cr+
 58jkrJ8xz/5kmmN4bXM4Wlpf9ZIYFXbvtbKrq3GZOXc+LpNKlWQyFgg/pIuxBewC
 uSgsNXXV0LFDi5JfER/8l9MMLtJwwc4VHzpLvMnRv+GtwO2/FKIIr9Fcv000IL2N
 0/Ppr52M7XpRruM/k+YroUQ4F1oBX6HB4e3rwqC+XG6n5bwn/Jc7kdy7aUojqNLG
 Nlr5f0vBjLTSF66Jnel71Bn+gbA1ogER7E+esSTMpyX+RgGJAUVt5oX9IjbXl3PI
 bk8xW1csSRxBI2NkFOd9EM3vMzdGc5uu+iOoy7iBvcAK0AEfo2Ml9YuSVFQeqAu0
 A96MUW155A+GKMC7I/LK8pTgMvYDedWhVW9uyXpMRjwdFC5/ywZU1aM00tL9HMpG
 pzHOFJgsYrf/6VCV8BwqgudRYd0K5EPSGeITCg973os/XzJIOCfJuy+Pn5V/F0ew
 lTbi8ipQD0Hh8A/Xt0QB
 =Q2vo
 -----END PGP SIGNATURE-----

Merge tag 'pm-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:

 - Implementation of opportunistic suspend (autosleep) and user space
   interface for manipulating wakeup sources.

 - Hibernate updates from Bojan Smojver and Minho Ban.

 - Updates of the runtime PM core and generic PM domains framework
   related to PM QoS.

 - Assorted fixes.

* tag 'pm-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (25 commits)
  epoll: Fix user space breakage related to EPOLLWAKEUP
  PM / Domains: Make it possible to add devices to inactive domains
  PM / Hibernate: Use get_gendisk to verify partition if resume_file is integer format
  PM / Domains: Fix computation of maximum domain off time
  PM / Domains: Fix link checking when add subdomain
  PM / Sleep: User space wakeup sources garbage collector Kconfig option
  PM / Sleep: Make the limit of user space wakeup sources configurable
  PM / Documentation: suspend-and-cpuhotplug.txt: Fix typo
  PM / Domains: Cache device stop and domain power off governor results, v3
  PM / Domains: Make device removal more straightforward
  PM / Sleep: Fix a mistake in a conditional in autosleep_store()
  epoll: Add a flag, EPOLLWAKEUP, to prevent suspend while epoll events are ready
  PM / QoS: Create device constraints objects on notifier registration
  PM / Runtime: Remove device fields related to suspend time, v2
  PM / Domains: Rework default domain power off governor function, v2
  PM / Domains: Rework default device stop governor function, v2
  PM / Sleep: Add user space interface for manipulating wakeup sources, v3
  PM / Sleep: Add "prevent autosleep time" statistics to wakeup sources
  PM / Sleep: Implement opportunistic sleep, v2
  PM / Sleep: Add wakeup_source_activate and wakeup_source_deactivate tracepoints
  ...
2012-05-23 14:07:06 -07:00
Linus Torvalds
eb2689e06b regmap: Fix the dependency on IRQ_DOMAIN for REGMAP_IRQ in the core
Fixes a missing select from the Palmas driver a bit more throoughly.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJPvK0PAAoJEBus8iNuMP3d370QAJ4UcCCB0qba+py+4ZC/P2CL
 LPTXV0OMv0FJVJtnE2VGVe/QKxxE62unIC1wSRE/g1WamcEsCPBmKRZPdL4P67r1
 TEZ4aSiyS71KVezfgXqBvNZxMmYglBtq1y8YR+v6RkZSJ1jdpSBDtbHA0uPj/cpG
 S7nzcpJLbmR/R+Qd3AJt2gAGszQgfM8YH+2uLqjnNUUoKpW4mmxoX3V8ddo9D6/O
 D4nfk9VTGlGtZBUkHYbF+C+GLCqWDQp3nSUvW01vqQF4pBve5ErXKkQL495srTDr
 0p94CMaxq0byQZdiVnxij5e82amDzjphflNwynC+ht09FFCYKgiFgbFsICiQvS+H
 xhO6G10cRS+sFpKX0Ex4Y8EofisrzHxT1gHiaCwpCT86jpaKU6IATA0m9cH3xaFA
 yiFtgBgRD1KDrfSUfYA9XyvidDah4Y1ZUE5+09G2vYbQyQaa+o+lEYnO3R9pyr5H
 3Tn0AH8lGAug8M2V/5l48DtCEs4r03OJ7Wrfvak6tWWXiIsjRo6zaKZKnXTkVpTn
 bFDx4tgSA/3nF46SHMBBZclAhmF/c3skLMqwoH84iicIfW6x2boXHGP60o5UDdPc
 ED4RYvNDEtvqxsJBlJUxPSJRIaXl9kEMleyIflcoKPv22UohStyNalsT7tjopC49
 RW8bbnCOEP8vYE5ORgYu
 =kkX0
 -----END PGP SIGNATURE-----

Merge tag 'regmap-domain-deps' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

Pull a regmap kconfig dependency fix from Mark Brown:
 "Fix the dependency on IRQ_DOMAIN for REGMAP_IRQ in the core

  Fixes a missing select from the Palmas driver a bit more throoughly."

* tag 'regmap-domain-deps' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: Use select .. if to get IRQ_DOMAIN enabled
2012-05-23 13:11:07 -07:00
Mark Brown
18d5eacb52 regmap: Use select .. if to get IRQ_DOMAIN enabled
Ensure that we can't get randconfig breakage by doing the IRQ_DOMAIN
select automatically. Don't just do the select from REGMAP_IRQ to ensure
that the select actually gets noticed.

Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-23 10:15:51 +01:00
Linus Torvalds
d79ee93de9 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler changes from Ingo Molnar:
 "The biggest change is the cleanup/simplification of the load-balancer:
  instead of the current practice of architectures twiddling scheduler
  internal data structures and providing the scheduler domains in
  colorfully inconsistent ways, we now have generic scheduler code in
  kernel/sched/core.c:sched_init_numa() that looks at the architecture's
  node_distance() parameters and (while not fully trusting it) deducts a
  NUMA topology from it.

  This inevitably changes balancing behavior - hopefully for the better.

  There are various smaller optimizations, cleanups and fixlets as well"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Taint kernel with TAINT_WARN after sleep-in-atomic bug
  sched: Remove stale power aware scheduling remnants and dysfunctional knobs
  sched/debug: Fix printing large integers on 32-bit platforms
  sched/fair: Improve the ->group_imb logic
  sched/nohz: Fix rq->cpu_load[] calculations
  sched/numa: Don't scale the imbalance
  sched/fair: Revert sched-domain iteration breakage
  sched/x86: Rewrite set_cpu_sibling_map()
  sched/numa: Fix the new NUMA topology bits
  sched/numa: Rewrite the CONFIG_NUMA sched domain support
  sched/fair: Propagate 'struct lb_env' usage into find_busiest_group
  sched/fair: Add some serialization to the sched_domain load-balance walk
  sched/fair: Let minimally loaded cpu balance the group
  sched: Change rq->nr_running to unsigned int
  x86/numa: Check for nonsensical topologies on real hw as well
  x86/numa: Hard partition cpu topology masks on node boundaries
  x86/numa: Allow specifying node_distance() for numa=fake
  x86/sched: Make mwait_usable() heed to "idle=" kernel parameters properly
  sched: Update documentation and comments
  sched_rt: Avoid unnecessary dequeue and enqueue of pushable tasks in set_cpus_allowed_rt()
2012-05-22 18:27:32 -07:00
Linus Torvalds
5d4e2d08e7 Driver core pull for 3.5-rc1
Here's the driver core, and other driver subsystems, pull request for
 the 3.5-rc1 merge window.
 
 Outside of a few minor driver core changes, we ended up with the
 following different subsystem and core changes as well, due to
 interdependancies on the driver core:
  - hyperv driver updates
  - drivers/memory being created and some drivers moved into it
  - extcon driver subsystem created out of the old Android staging switch
    driver code
  - dynamic debug updates
  - printk rework, and /dev/kmsg changes
 
 All of this has been tested in the linux-next releases for a few weeks
 with no reported problems.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iEYEABECAAYFAk+7q28ACgkQMUfUDdst+ykXmwCfcPASzC+/bDkuqdWsqzxlWZ7+
 VOQAnAriySv397St36J6Hz5bMQZwB1Yq
 =SQc+
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg Kroah-Hartman:
 "Here's the driver core, and other driver subsystems, pull request for
  the 3.5-rc1 merge window.

  Outside of a few minor driver core changes, we ended up with the
  following different subsystem and core changes as well, due to
  interdependancies on the driver core:
   - hyperv driver updates
   - drivers/memory being created and some drivers moved into it
   - extcon driver subsystem created out of the old Android staging
     switch driver code
   - dynamic debug updates
   - printk rework, and /dev/kmsg changes

  All of this has been tested in the linux-next releases for a few weeks
  with no reported problems.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up conflicts in drivers/extcon/extcon-max8997.c where git noticed
that a patch to the deleted drivers/misc/max8997-muic.c driver needs to
be applied to this one.

* tag 'driver-core-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (90 commits)
  uio_pdrv_genirq: get irq through platform resource if not set otherwise
  memory: tegra{20,30}-mc: Remove empty *_remove()
  printk() - isolate KERN_CONT users from ordinary complete lines
  sysfs: get rid of some lockdep false positives
  Drivers: hv: util: Properly handle version negotiations.
  Drivers: hv: Get rid of an unnecessary check in vmbus_prep_negotiate_resp()
  memory: tegra{20,30}-mc: Use dev_err_ratelimited()
  driver core: Add dev_*_ratelimited() family
  Driver Core: don't oops with unregistered driver in driver_find_device()
  printk() - restore prefix/timestamp printing for multi-newline strings
  printk: add stub for prepend_timestamp()
  ARM: tegra30: Make MC optional in Kconfig
  ARM: tegra20: Make MC optional in Kconfig
  ARM: tegra30: MC: Remove unnecessary BUG*()
  ARM: tegra20: MC: Remove unnecessary BUG*()
  printk: correctly align __log_buf
  ARM: tegra30: Add Tegra Memory Controller(MC) driver
  ARM: tegra20: Add Tegra Memory Controller(MC) driver
  printk() - restore timestamp printing at console output
  printk() - do not merge continuation lines of different threads
  ...
2012-05-22 16:02:13 -07:00
Marek Szyprowski
0f51596bd3 Merge branch 'for-next-arm-dma' into for-linus
Conflicts:
	arch/arm/Kconfig
	arch/arm/mm/dma-mapping.c

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-05-22 08:55:43 +02:00
Marek Szyprowski
c64be2bb1c drivers: add Contiguous Memory Allocator
The Contiguous Memory Allocator is a set of helper functions for DMA
mapping framework that improves allocations of contiguous memory chunks.

CMA grabs memory on system boot, marks it with MIGRATE_CMA migrate type
and gives back to the system. Kernel is allowed to allocate only movable
pages within CMA's managed memory so that it can be used for example for
page cache when DMA mapping do not use it. On
dma_alloc_from_contiguous() request such pages are migrated out of CMA
area to free required contiguous block and fulfill the request. This
allows to allocate large contiguous chunks of memory at any time
assuming that there is enough free memory available in the system.

This code is heavily based on earlier works by Michal Nazarewicz.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Rob Clark <rob.clark@linaro.org>
Tested-by: Ohad Ben-Cohen <ohad@wizery.com>
Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Tested-by: Barry Song <Baohua.Song@csr.com>
2012-05-21 15:09:37 +02:00
Marek Szyprowski
bca0fa5f12 common: add dma_mmap_from_coherent() function
Add a common helper for dma-mapping core for mapping a coherent buffer
to userspace.

Reported-by: Subash Patel <subashrp@gmail.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Tested-By: Subash Patel <subash.ramaswamy@linaro.org>
2012-05-21 15:06:09 +02:00
Rafael J. Wysocki
06132ee903 Merge branch 'pm-domains'
* pm-domains:
  PM / Domains: Make it possible to add devices to inactive domains
2012-05-18 20:46:17 +02:00
Rafael J. Wysocki
ca1d72f033 PM / Domains: Make it possible to add devices to inactive domains
The generic PM domains core code currently requires domains to be in
the "power on" state for adding devices to them, but this limitation
turns out to be inconvenient in some situations, so remove it.

For this purpose, make __pm_genpd_add_device() set the device's
need_restore flag if the domain is in the "power off" state, so that
the device's "restore state" (usually .runtime_resume()) callback
is executed when it is resumed after the domain has been turned on.
If the domain is in the "power on" state, the device's need_restore
flag will be cleared by __pm_genpd_add_device(), so that its "save
state" (usually .runtime_suspend()) callback is executed when the
domain is about to be turned off.  However, since that default
behavior need not be always desirable, add a helper function
pm_genpd_dev_need_restore() allowing a device's need_restore flag
to be set/unset at any time.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-18 20:45:26 +02:00
Mark Brown
38e7f5d1b7 regmap: Fix typo in IRQ register striding
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-17 22:59:24 +01:00
Peter Zijlstra
8e7fbcbc22 sched: Remove stale power aware scheduling remnants and dysfunctional knobs
It's been broken forever (i.e. it's not scheduling in a power
aware fashion), as reported by Suresh and others sending
patches, and nobody cares enough to fix it properly ...
so remove it to make space free for something better.

There's various problems with the code as it stands today, first
and foremost the user interface which is bound to topology
levels and has multiple values per level. This results in a
state explosion which the administrator or distro needs to
master and almost nobody does.

Furthermore large configuration state spaces aren't good, it
means the thing doesn't just work right because it's either
under so many impossibe to meet constraints, or even if
there's an achievable state workloads have to be aware of
it precisely and can never meet it for dynamic workloads.

So pushing this kind of decision to user-space was a bad idea
even with a single knob - it's exponentially worse with knobs
on every node of the topology.

There is a proposal to replace the user interface with a single
3 state knob:

 sched_balance_policy := { performance, power, auto }

where 'auto' would be the preferred default which looks at things
like Battery/AC mode and possible cpufreq state or whatever the hw
exposes to show us power use expectations - but there's been no
progress on it in the past many months.

Aside from that, the actual implementation of the various knobs
is known to be broken. There have been sporadic attempts at
fixing things but these always stop short of reaching a mergable
state.

Therefore this wholesale removal with the hopes of spurring
people who care to come forward once again and work on a
coherent replacement.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1326104915.2442.53.camel@twins
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-17 13:48:56 +02:00
Graeme Gregory
022f926a24 regmap: add support for non contiguous status to regmap-irq
In some chips the IRQ status registers are not contiguous in the register
map but spaced at even spaces. This is an easy case to handle with minor
changes. It is assume for this purpose that the stride for status is
equal to the stride for mask/ack registers as well.

Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14 17:40:05 +01:00
Hiroshi DOYU
094e47e9fa Driver Core: don't oops with unregistered driver in driver_find_device()
driver_find_device() can be called with an unregistered driver. Need
to check driver_private to see if it's populated or not, especially
under deferrable probe.

In the case that there are 2 drivers, one depends on the other. With
-EPROBE_DEFER, two drivers can use deferred probe to ensure that their
relative probe order doesn't matter. If dependee driver is probed
first, then the dependant's driver_find_device('dependee')
succeeds. If the dependant is probed first, then the dependant's
driver_find_device('dependee') should return NULL, and the dependant
should get -EPROBE_DEFER. driver_find_device() needs to return NULL if
it's not populated.

In [PATCHv5 2/3] ARM: tegra: Add SMMU enabler in AHB:
  http://article.gmane.org/gmane.linux.ports.tegra/4658

"tegra_ahb_driver" may not be populated when it's called.

For more SMMU/AHB specific discussion, refer to the following thread:
  https://lkml.org/lkml/2012/5/10/21

Signed-off-by: Hiroshi DOYU <hdoyu@nvidia.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 08:46:01 -07:00
Mark Brown
4af8be67fd regmap: Convert regmap_irq to use irq_domain
This gets us up to date with the recommended current kernel infrastructure
and should transparently give us device tree interrupt bindings for any
devices using the framework. If an explicit IRQ mapping is passed in then
a legacy interrupt range is created, otherwise a simple linear mapping is
used. Previously a mapping was mandatory so existing drivers should not
be affected.

A function regmap_irq_get_virq() is provided to allow drivers to map
individual IRQs which should be used in preference to the existing
regmap_irq_chip_get_base() which is only valid if a legacy IRQ range is
provided.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13 19:25:59 +01:00
Mark Brown
06e65cb322 Merge branches 'regmap-core', 'regmap-stride', 'regmap-mmio' and 'regmap-irq' into regmap-next 2012-05-13 19:20:47 +01:00
Mark Brown
2431d0a1d6 regmap: Pass back the allocated regmap IRQ controller data
It's needed for freeing and for obtaining the IRQ base later on.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13 19:16:13 +01:00
Mark Brown
25061d2857 regmap: Last minute bug fix for 3.4
This is a last minute bug fix that was only just noticed since the code
 path that's being exercised here is one that is fairly rarely used.  The
 changelog for the change itself is extremely clear and the code itself
 is obvious to inspection so should be pretty safe.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJPqoQhAAoJEBus8iNuMP3dj1kP/0Z1yIk1ME0KzSy42/qbGKsp
 +2mrAASkh7DbbWU2hSmwTpEgAAiY2ws0A/Uyj/Al4f/gJW6bZvlxK4mbf1i+P1LG
 ab3ohhUOqexHVaIKMTnYKhnHWuzU25mnf2vW8IOr6jccu6h7X4orDmw1uEPVgsbs
 P7fThQa0BPRkiLIUWGmg0oMY6IXJlzsStDK2Npw47EypY4FZCZucJgXkmYZLt0Nk
 mhLPsznD5GqHNSmCqrUI3j/s3R0sd/Xc63pvznBU9D8RAbSRgi2vGL8UenEtIQgt
 bVXOKe5H8ZzXYNYpzpGeJm3dTE2pZWmT1hfRSf0kBOkLhEpt/Oy9WBj1kfoTg9n9
 fNH6OJYn12uG0qQomiAT96Qm3qrslF5y9S64ZyHT6BAkJT87wnEqTmaQkoAevDEr
 hldzT+dTPAk2Pspge8m910+kQA72YyE1z6/PikvkEepYDFrqffZcBFWqjW8aQjGj
 /5r7F5fLC7zJku0FjYUMRYDgYc9z0lk6tDt8QL7E7j+55ntrhYR8IuTQA7g2asal
 yeQSTqa/NkJcch+aULgyOU0W9U1z2i04mdGI74iJnf3DSGGmvJ95IYLJA4tfnIOw
 63xo2BhmHVGyRqTN5l7o5Zlgf5FdcUt+5EBLudSqqZynB/tMZNgb0PEzfIRFBuRq
 GSIm5dwIqKgtymCEOUmp
 =xcal
 -----END PGP SIGNATURE-----

Merge tag 'regmap-3.4' into regmap-stride

regmap: Last minute bug fix for 3.4

This is a last minute bug fix that was only just noticed since the code
path that's being exercised here is one that is fairly rarely used.  The
changelog for the change itself is extremely clear and the code itself
is obvious to inspection so should be pretty safe.

Conflicts:
	drivers/base/regmap/regmap.c (overlap between the fix and stride code)
2012-05-12 13:06:08 +01:00
Rafael J. Wysocki
351520a9eb Merge branch 'pm-sleep'
* pm-sleep:
  PM / Sleep: User space wakeup sources garbage collector Kconfig option
  PM / Sleep: Make the limit of user space wakeup sources configurable
  PM / Documentation: suspend-and-cpuhotplug.txt: Fix typo
  PM / Sleep: Fix a mistake in a conditional in autosleep_store()
  epoll: Add a flag, EPOLLWAKEUP, to prevent suspend while epoll events are ready
  PM / Sleep: Add user space interface for manipulating wakeup sources, v3
  PM / Sleep: Add "prevent autosleep time" statistics to wakeup sources
  PM / Sleep: Implement opportunistic sleep, v2
  PM / Sleep: Add wakeup_source_activate and wakeup_source_deactivate tracepoints
  PM / Sleep: Change wakeup source statistics to follow Android
  PM / Sleep: Use wait queue to signal "no wakeup events in progress"
  PM / Sleep: Look for wakeup events in later stages of device suspend
  PM / Hibernate: Hibernate/thaw fixes/improvements
2012-05-11 21:15:09 +02:00
Rafael J. Wysocki
b723b0eb91 PM / Domains: Fix computation of maximum domain off time
The default domain power off governor function for generic PM
domains, default_power_down_ok(), may violate subdomain maximum
off time limit by allowing the master domain to be off for too
long.  Namely, it only finds the minium of all device maximum
off times over the domain's devices and uses that to compute the
domain's maximum off time, but it should do the same for the
subdomains.

Fix this problem by modifying default_power_down_ok() to compute
the given domain's maximum off time as the difference between the
minimum off time over all devices and subdomains in the domain and
its power on latency.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-11 21:11:44 +02:00
Huang Ying
4fcac10d28 PM / Domains: Fix link checking when add subdomain
Current pm_genpd_add_subdomain() will allow duplicated link between
master and slave domain.  This patch fixed it.

Because when current pm_genpd_add_subdomain() checks whether the link
between the master and slave generic PM domain already exists,
slave_links instead of master_links of master domain is used.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-11 21:11:37 +02:00
Laxman Dewangan
6560ffd1cc regmap: fix possible memory corruption in regmap_bulk_read()
The function regmap_bulk_read() calls the regmap_read() for
each register if set of register has volatile and cache is
enabled. In this case, last few register read makes the memory
corruption if the register size is not the size of unsigned int.
The regam_read() takes argument as unsigned int for returning
value and it update the value as
	*val = map->format.parse_val(map->work_buf);
This causes complete 4 bytes (size of unsigned int) to get written.
Now if client pass the memory pointer for value which is equal to the
required size of register count in regmap_bulk_read() then last few
register read actually update the memory beyond passed pointer size.

Avoid this by using local variable for read and then do memcpy()
for actual byte copy to passed pointer based on register size.

I allocated one pointer ptr and take first 16 bytes dump of that
pointer then call regmap_bulk_read() with pointer which is just
on top of this allocated pointer and register count of 128. Here
register size is 1 byte.
The memory trace of last 5 register read are as follows:

[    5.438589] regmap_bulk_read after regamp_read() for register 122
[    5.447421] 0xef993c20 0xef993c00 0x00000000 0x00000001
[    5.467535] regmap_bulk_read after regamp_read() for register 123
[    5.476374] 0xef993c20 0xef993c00 0x00000000 0x00000001
[    5.496425] regmap_bulk_read after regamp_read() for register 124
[    5.505260] 0xef993c20 0xef993c00 0x00000000 0x00000001
[    5.525372] regmap_bulk_read after regamp_read() for register 125
[    5.534205] 0xef993c00 0xef993c00 0x00000000 0x00000001
[    5.554258] regmap_bulk_read after regamp_read() for register 126
[    5.563100] 0xef990000 0xef993c00 0x00000000 0x00000001
[    5.554258] regmap_bulk_read after regamp_read() for register 127
[    5.587108] 0xef000000 0xef993c00 0x00000000 0x00000001

Here it is observed that the memory content at first word started changing
on last 3 regmap_read() and so corruption happened.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-09 15:44:11 +01:00
Mark Brown
72b39f6f2b regmap: Implement dev_get_regmap()
Use devres to implement dev_get_regmap(). This should mean that in almost
all cases devices wishing to take advantage of framework features based on
regmap shouldn't need to explicitly pass the regmap into the framework.
This simplifies device setup a bit.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-08 18:19:15 +01:00
Kay Sievers
c4e00daaa9 driver-core: extend dev_printk() to pass structured data
Extends dev_printk() to attach a dictionary with a device identifier
and the driver core subsystem name to logged messages, which makes
dev_prink() reliable machine-readable. In addition to the printed
plain text message, it creates these properties:
    SUBSYSTEM=     - the driver-core subsytem name
    DEVICE=
      b12:8        - block dev_t
      c127:3       - char dev_t
      n8           - netdev ifindex
      +sound:card0 - subsystem:devname

Tested-by: William Douglas <william.douglas@intel.com>
Signed-off-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-07 17:12:03 -07:00
Rafael J. Wysocki
6ff7bb0d02 PM / Domains: Cache device stop and domain power off governor results, v3
The results of the default device stop and domain power off governor
functions for generic PM domains, default_stop_ok() and
default_power_down_ok(), depend only on the timing data of devices,
which are static, and on their PM QoS constraints.  Thus, in theory,
these functions only need to carry out their computations, which may
be time consuming in general, when it is known that the PM QoS
constraint of at least one of the devices in question has changed.

Use the PM QoS notifiers of devices to implement that.  First,
introduce new fields, constraint_changed and max_off_time_changed,
into struct gpd_timing_data and struct generic_pm_domain,
respectively, and register a PM QoS notifier function when adding
a device into a domain that will set those fields to 'true' whenever
the device's PM QoS constraint is modified.  Second, make
default_stop_ok() and default_power_down_ok() use those fields to
decide whether or not to carry out their computations from scratch.

The device and PM domain hierarchies are taken into account in that
and the expense is that the changes of PM QoS constraints of
suspended devices will not be taken into account immediately, which
isn't guaranteed anyway in general.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-05 21:51:58 +02:00
Rafael J. Wysocki
efa6902501 PM / Domains: Make device removal more straightforward
The removal of a device from a PM domain doesn't have to browse
the domain's device list, because it can check directly if the
device belongs to the given domain.  Moreover, it should clear
the domain_data pointer in dev->power.subsys_data, because
dev_pm_put_subsys_data(dev) may not remove dev->power.subsys_data
and the stale domain data pointer may cause problems to happen.

Rework pm_genpd_remove_device() taking the above observations into
account.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-05 21:51:50 +02:00
Mark Brown
d926d0e4c7 devres: Add devres_release()
APIs using devres frequently want to implement a "remove and free the
resource" operation so it seems sensible that they should be able to
just have devres do the freeing for them since that's a big part of what
devres is all about.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04 16:33:16 -07:00
Mark Brown
698cd2ddd8 devres: Clarify documentation for devres_destroy()
It's not massively obvious (at least to me) that removing and freeing a
resource does not involve calling the release function for the resource
but rather only removes the management of it. Make the documentation more
explicit.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04 16:33:16 -07:00
Greg Kroah-Hartman
eb1574270a Merge 3.4-rc5 into driver-core-next
This was done to resolve a merge issue with the init/main.c file.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-02 14:33:37 -07:00
Rafael J. Wysocki
23e0fc5ae6 PM / QoS: Create device constraints objects on notifier registration
The current behavior of dev_pm_qos_add_notifier() makes device PM QoS
notifiers less than useful.  Namely, it silently returns success when
called before any PM QoS constraints are added for the device, so the
caller will assume that the notifier has been registered, but when
someone actually adds some nontrivial constraints for the device
eventually, the previous callers of dev_pm_qos_add_notifier()
will not know about that and their notifier routines will not be
executed (contrary to their expectations).

To address this problem make dev_pm_qos_add_notifier() create the
constraints object for the device if it is not present when the
routine is called.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by : markgross <markgross@thegnar.org>
2012-05-01 21:28:43 +02:00
Rafael J. Wysocki
76e267d822 PM / Runtime: Remove device fields related to suspend time, v2
After the previous changes in default_stop_ok() and
default_power_down_ok() for PM domains, there are two fields in
struct dev_pm_info that aren't necessary any more,  suspend_time
and max_time_suspended_ns.

Remove those fields along with all of the code that accesses them,
which simplifies the runtime PM framework quite a bit.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-01 21:28:38 +02:00
Rafael J. Wysocki
dd8683e97f PM / Domains: Rework default domain power off governor function, v2
The existing default domain power down governor function for PM
domains, default_power_down_ok(), is supposed to check whether or not
the PM QoS latency constraints of the devices in the domain will be
violated if the domain is turned off by pm_genpd_poweroff().
However, the computations carried out by it don't reflect the
definition of the PM QoS latency constrait in
Documentation/ABI/testing/sysfs-devices-power.

Make default_power_down_ok() follow the definition of the PM QoS
latency constrait.  In particular, make it only take latencies into
account, because it doesn't matter how much time has elapsed since
the domain's devices were suspended for the computation.

Remove the break_even_ns and power_off_time fields from
struct generic_pm_domain, because they are not necessary any more.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-01 21:28:15 +02:00
Rafael J. Wysocki
a5bef810ad PM / Domains: Rework default device stop governor function, v2
The existing default device stop governor function for PM domains,
default_stop_ok(), is supposed to check whether or not the device's
PM QoS latency constraint will be violated if the device is stopped
by pm_genpd_runtime_suspend().  However, the computations carried out
by it don't reflect the definition of the PM QoS latency constrait in
Documentation/ABI/testing/sysfs-devices-power.

Make default_stop_ok() follow the definition of the PM QoS latency
constrait.  In particular, make it take the device's start and stop
latencies correctly.

Add a new field, effective_constraint_ns, to struct gpd_timing_data
and use it to store the difference between the device's PM QoS
constraint and its resume latency for use by the device's parent
(the effective_constraint_ns values for the children are used for
computing the parent's one along with its PM QoS constraint).

Remove the break_even_ns field from struct gpd_timing_data, because
it's not used any more.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-01 21:28:03 +02:00
Rafael J. Wysocki
b86ff9820f PM / Sleep: Add user space interface for manipulating wakeup sources, v3
Android allows user space to manipulate wakelocks using two
sysfs file located in /sys/power/, wake_lock and wake_unlock.
Writing a wakelock name and optionally a timeout to the wake_lock
file causes the wakelock whose name was written to be acquired (it
is created before is necessary), optionally with the given timeout.
Writing the name of a wakelock to wake_unlock causes that wakelock
to be released.

Implement an analogous interface for user space using wakeup sources.
Add the /sys/power/wake_lock and /sys/power/wake_unlock files
allowing user space to create, activate and deactivate wakeup
sources, such that writing a name and optionally a timeout to
wake_lock causes the wakeup source of that name to be activated,
optionally with the given timeout.  If that wakeup source doesn't
exist, it will be created and then activated.  Writing a name to
wake_unlock causes the wakeup source of that name, if there is one,
to be deactivated.  Wakeup sources created with the help of
wake_lock that haven't been used for more than 5 minutes are garbage
collected and destroyed.  Moreover, there can be only WL_NUMBER_LIMIT
wakeup sources created with the help of wake_lock present at a time.

The data type used to track wakeup sources created by user space is
called "struct wakelock" to indicate the origins of this feature.

This version of the patch includes an rbtree manipulation fix from John Stultz.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: NeilBrown <neilb@suse.de>
2012-05-01 21:26:05 +02:00
Rafael J. Wysocki
55850945e8 PM / Sleep: Add "prevent autosleep time" statistics to wakeup sources
Android uses one wakelock statistics that is only necessary for
opportunistic sleep.  Namely, the prevent_suspend_time field
accumulates the total time the given wakelock has been locked
while "automatic suspend" was enabled.  Add an analogous field,
prevent_sleep_time, to wakeup sources and make it behave in a similar
way.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01 21:25:49 +02:00
Rafael J. Wysocki
7483b4a4d9 PM / Sleep: Implement opportunistic sleep, v2
Introduce a mechanism by which the kernel can trigger global
transitions to a sleep state chosen by user space if there are no
active wakeup sources.

It consists of a new sysfs attribute, /sys/power/autosleep, that
can be written one of the strings returned by reads from
/sys/power/state, an ordered workqueue and a work item carrying out
the "suspend" operations.  If a string representing the system's
sleep state is written to /sys/power/autosleep, the work item
triggering transitions to that state is queued up and it requeues
itself after every execution until user space writes "off" to
/sys/power/autosleep.

That work item enables the detection of wakeup events using the
functions already defined in drivers/base/power/wakeup.c (with one
small modification) and calls either pm_suspend(), or hibernate() to
put the system into a sleep state.  If a wakeup event is reported
while the transition is in progress, it will abort the transition and
the "system suspend" work item will be queued up again.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: NeilBrown <neilb@suse.de>
2012-05-01 21:25:38 +02:00
Arve Hjønnevåg
6791e36c4a PM / Sleep: Add wakeup_source_activate and wakeup_source_deactivate tracepoints
Add tracepoints to wakeup_source_activate and wakeup_source_deactivate.
Useful for checking that specific wakeup sources overlap as expected.

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-01 21:25:25 +02:00
Rafael J. Wysocki
30e3ce6dcb PM / Sleep: Change wakeup source statistics to follow Android
Wakeup statistics used by Android are slightly different from what we
have in wakeup sources at the moment and there aren't any known
users of those statistics other than Android, so modify them to make
it easier for Android to switch to wakeup sources.

This removes the struct wakeup_source's hit_cout field, which is very
rough and therefore not very useful, and adds two new fields,
wakeup_count and expire_count.  The first one tracks how many times
the wakeup source is activated with events_check_enabled set (which
roughly corresponds to the situations when a system power transition
to a sleep state is in progress and would be aborted by this wakeup
source if it were the only active one at that time) and the second
one is the number of times the wakeup source has been activated with
a timeout that expired.

Additionally, the last_time field is now updated when the wakeup
source is deactivated too (previously it was only updated during
the wakeup source's activation), which seems to be what Android does
with the analogous counter for wakelocks.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01 21:25:11 +02:00
Rafael J. Wysocki
60af106691 PM / Sleep: Use wait queue to signal "no wakeup events in progress"
The current wakeup source deactivation code doesn't do anything when
the counter of wakeup events in progress goes down to zero, which
requires pm_get_wakeup_count() to poll that counter periodically.
Although this reduces the average time it takes to deactivate a
wakeup source, it also may lead to a substantial amount of unnecessary
polling if there are extended periods of wakeup activity.  Thus it
seems reasonable to use a wait queue for signaling the "no wakeup
events in progress" condition and remove the polling.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: mark gross <markgross@thegnar.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01 21:24:59 +02:00
Rafael J. Wysocki
52d136cc2c PM / Sleep: Look for wakeup events in later stages of device suspend
Currently, the device suspend code in drivers/base/power/main.c
only checks if there have been any wakeup events, and therefore the
ongoing system transition to a sleep state should be aborted, during
the first (i.e. "suspend") device suspend phase.  However, wakeup
events may be reported later as well, so it's reasonable to look for
them in the in the subsequent (i.e. "late suspend" and "suspend
noirq") phases.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01 21:24:50 +02:00
Mark Brown
7a64761432 regmap: Devices using format_write don't support bulk operations
Set the use_single_rw flag for devices that use format_write() since
format_write() doesn't support any form of block operation.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-30 23:30:15 +01:00