This patch cleanups registered devices on remove.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The led driver used OEM commands which are not part of the nvec protocol
definition. Therefore it is renamed to nvec_paz00 to reflect that it only
applies to PAZ00 board based devices.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simplify powermanagement initialization by using pm_ops macro.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch simplifies code by using the module_platform_driver
macro.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace a printk in nvec core driver with dev_warn.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch cleanups the nvec and its childs by replacing calls to
resource allocations by their devm_* equivalents.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The below patch fixes a typo I found while reading.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Cc: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
nvec modules do not require other stuff to be build in,
nor does nvec_ps2 require mouse support, only generic
serio support.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This saves us some calls and thus makes the code shorter
and nicer.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The constant I2C_SL_NEWL meant "new slave", but the
S was missing.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This changes the serio type of the nvec_ps2 mouse port to passthrough.
The old 8042 type seems appropiete for keyboards only.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This change makes the touchpad buttons work after suspend/resume.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This can print the mouse traffic which goes over the i2c bus. Make
mouse debugging messages configurable and disable them by default.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This packet size used on most modern touchpads. Ideally, this should
be configurable or autodetected.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Instead of executing these commands during open/close, the start/stop
event of the serio device seem to be more appropiete.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds suspend and resume functions to the nvec_ps2 mouse driver.
During suspend the nvec sends a "Cancel all mouse events" command. If
this is missed, there will be still some bytes in the received buffer
after resume which make the mouse go out of sync.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds device tree support to the nvec driver. By using this method
it is no longer necessary to specify platform data through a board
file.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Acked-by: Stephen Warren <swarren@nvidia.com>
Cc: Julian Andres Klode <jak@jak-linux.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes a compilation error in nvec.c due to the missing module.h include.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Cc: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The suspend commands need to be sent using the
synchronous method, otherwise the power gets
disabled before the messages are transferred.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
[jak@jak-linux.org: Rewrote commit message]
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As the comment indicates, adding that udelay seems to
improve the stability of the communication, although
it is not known why this is the case.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add the includes that are currently missing in nvec.h
and nvec.c and reorder them alphabetically.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The nvec_power system polls nvec for battery information. In some
cases, that part seems to be overloaded and unable to respond
fast in which case it sends an incomplete response. We need to
mark the transfer as completed, though, in order to prevent
endless retries which can kill nvec.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Get 4 bytes of data from nvec at once instead of just a single
byte. This makes the driver more similar to nvidias and might
improve reliability.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Return the return value of nvec_write_async() in the methods
returning an int.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Reject incomplete messages, causing the request to be
transmitted again. This should fix various problems
out there.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If no RX buffer is available in state 1, jump to state
0 again. This will produce an incredible amount of
warnings, but it is not supposed to happen anyway.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Allow TX buffers to be allocated only in the upper 75% of the pool
to avoid a completely filled buffer preventing the driver from
processing responses. This also improves performance, as RX
allocations do not require checking buffers allocated for TX
unless there are more than 16 incoming messages -- which is
highly unlikely.
An earlier version used the lower 75% for TX messages, but
that was considered to be not that effective due to the
overlaps of RX and TX buffers mentioned above.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Client code wishing to make use of nvec_write_sync() must
have a way to free the returned pointer, otherwise we run
out of poool memory fairly soon.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Those macros are needed only for implementation purposes and
do not have any use for other code wishing to use nvec.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add kernel-doc comments describing the functions
and structs we currently have.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Change nvec_write_async() to return an integer, 0 by default,
a negative error on failure. Change nvec_write_sync() to
check the return value and abort if it is negative.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When the caps lock key is pressed, toggle the associated
LED. According to Nvidia code, we should send 0x01 where
we sent 0x07, but this does not appear to work correctly
on the AC100.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Forgotten in the last commit(s) which contained the copyrightable
material, so let's add it now. I believe that only my nvec.c
contributions are copyrightable, nvec.h is just interface naming,
so does not deserve that yet.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The scratch area is not part of the pool and thus gets
no allocation message. Printing a free message would
be confusing, and the pointer subtraction would be
undefined behavior.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Rewrite the interrupt handler to use a state machine similar to
that found in the various kernels for the Advent Vega. This also
changes the code to use the new functions introduced in the
previous commits.
This also merges the rewrite sent in August 2011 by Marc
Dietrich, and thus also includes code by him. His original
patch can be found on the mailing list.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add functions nvec_msg_is_event() and nvec_msg_size() which
do just what the say: tell whether the message is an event,
and getting the size of the message.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Introduce nvec_gpio_set_value(), which works like
gpio_set_value(), but also creates a debugging
message, if that's enabled.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Introduce two new functions nvec_msg_alloc() and nvec_msg_free()
that allocate and free message buffers from the internal pool
of messages.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds config dependencies for the NVEC keyboard, mouse,
and power drivers.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mostly small stuff only. Hopefully completed during the next
release cycle.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
[jak@jak-linux.org: Removed some items no longer valid]
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds support for LEDs connect to a nvec. A single brightness
property is exported to sysfs. LEDs are selected via bitfields in the
brightness value. Also the blinking behavior is selected through this
method. Vendors may use different values for different HW designs.
Signed-off-by: Ilya Petrov <ilya.muromec@gmail.com>
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
[jak@jak-linux.org: Fixed checkpatch warnings]
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The ec command used was for muting, not unmuting.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Rework the tegra slave controller init to look more like in
tegra-i2c.c. This makes the nvec init reliable. Also add de-init of
the slave to be used during suspend.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Split of the previous patch and the next by Marc, as that
patch is not strictly a coding style fix only.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes coding style and adds copyright notices.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
[jak@jak-linux.org: Merge later cleanup into that patch]
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Those headers were apparently included by other headers
previously, but are not anymore.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch converts the nvec to use mfd cells and improves the
registration of the platform driver. The child drivers are also
converted to use mfd cells and platform registration.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patches nvec_kbd.c to the file that fixes up errors found by
the checkpath.pl tool.
Signed-off-by: Colin Brophy <colin@brophys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add a note about the abuse of the clk API to the nvec/TODO list.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Many stupid corrections of duplicated includes based on the output of
scripts/checkincludes.pl.
Signed-off-by: Vitaliy Ivanov <vitalivanov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
