* 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (741 commits)
staging:iio:meter:ade7753 should be 16 bit read not 8 bit for mode register.
staging:iio:kfifo_buf fix double initialization of the ring device structure.
staging:iio:accel:lis3l02dq: fix incorrect pointer passed to spi_set_drvdata.
staging:iio:imu fix missing register table index for some channels
spectra: enable device before poking it
staging: rts_pstor: Fix a miswriting
staging/lirc_bt829: Return -ENODEV when no hardware is found.
staging/lirc_parallel: remove pointless prototypes.
staging/lirc_parallel: fix panic on rmmod
staging:iio:adc:ad7476: Incorrect pointer into spi_set_drvdata.
Staging: zram: Fix kunmapping order
Revert "gma500: Fix dependencies"
gma500: Add medfield header
gma500: wire up the mrst i2c bus from chip_info
gma500: Fix DPU build
gma500: Clean up the DPU config and make it runtime
gma500: resync with Medfield progress
gma500: Use the mrst helpers and power control for mode commit
gma500@ Fix backlight range error
gma500: More Moorestown muddle meddling means MM maybe might modeset
...
Fix up fairly trivial conflicts all over, mostly due to header file
cleanup conflicts, but some deleted files and some just context changes:
- Documentation/feature-removal-schedule.txt
- drivers/staging/bcm/headers.h
- drivers/staging/brcm80211/brcmfmac/dhd_linux.c
- drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
- drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h
- drivers/staging/brcm80211/brcmfmac/wl_iw.c
- drivers/staging/et131x/et131x_netdev.c
- drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
- drivers/staging/rtl8192e/r8192E.h
- drivers/staging/usbip/userspace/src/utils.h
When compiling the rtl8187se driver from staging on a big-endian
architecture, the following warning results:
CC [M] drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.o
drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c: In function 'ieee80211_probe_resp':
drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c:824: warning: value computed is not used
The warning is due to misuse of cpu_to_le16().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It was pointed out by 'make versioncheck' that some includes of
linux/version.h are not needed in drivers/staging/rtl8187se/,
drivers/staging/rtl8192e/, drivers/staging/rtl8192u/ &
drivers/staging/rtl8712/.
This patch removes them.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove the use of obsolete create_workqueue(name, 0) in
ieee80211_softmac.c, since the create_workqueue interface has changed.
Signed-off-by: Wanlong Gao <wanlong.gao@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Made necessary by commit a6b7a40786 ("net: remove
interrupt.h inclusion from netdevice.h").
Fixes these build errors:
drivers/staging/brcm80211/brcmfmac/dhd_linux.c:1212:3: error: implicit declaration of function 'in_interrupt'
drivers/staging/brcm80211/brcmfmac/dhd_linux.c:1390:4: error: implicit declaration of function 'tasklet_schedule'
drivers/staging/brcm80211/brcmfmac/dhd_linux.c:1988:3: error: implicit declaration of function 'tasklet_init'
drivers/staging/brcm80211/brcmfmac/dhd_linux.c:2288:5: error: implicit declaration of function 'tasklet_kill'
drivers/staging/brcm80211/brcmfmac/dhd_linux.c:232:24: error: field 'tasklet' has incomplete type
drivers/staging/brcm80211/brcmfmac/wl_iw.c:3670:2: error: implicit declaration of function 'in_interrupt'
drivers/staging/brcm80211/brcmsmac/wl_mac80211.c:1349:3: error: implicit declaration of function 'free_irq'
drivers/staging/brcm80211/brcmsmac/wl_mac80211.c:1352:2: error: implicit declaration of function 'tasklet_kill'
drivers/staging/brcm80211/brcmsmac/wl_mac80211.c:1538:4: error: implicit declaration of function 'tasklet_schedule'
drivers/staging/brcm80211/brcmsmac/wl_mac80211.c:765:2: error: implicit declaration of function 'tasklet_init'
drivers/staging/brcm80211/brcmsmac/wl_mac80211.c:817:2: error: implicit declaration of function 'request_irq'
drivers/staging/brcm80211/brcmsmac/wl_mac80211.c:817:31: error: 'IRQF_SHARED' undeclared (first use in this function)
drivers/staging/brcm80211/brcmsmac/wl_mac80211.h:65:24: error: field 'tasklet' has incomplete type
drivers/staging/rtl8187se/ieee80211/ieee80211.h:994:24: error: field 'ps_task' has incomplete type
drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c:1790:3: error: implicit declaration of function 'tasklet_schedule'
drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c:2590:2: error: implicit declaration of function 'tasklet_init'
drivers/staging/rtl8187se/r8180.h:461:24: error: field 'irq_rx_tasklet' has incomplete type
drivers/staging/rtl8187se/r8180_core.c:2764:2: error: implicit declaration of function 'tasklet_init'
drivers/staging/rtl8187se/r8180_core.c:2954:2: error: implicit declaration of function 'request_irq'
drivers/staging/rtl8187se/r8180_core.c:2954:55: error: 'IRQF_SHARED' undeclared (first use in this function)
drivers/staging/rtl8187se/r8180_core.c:3641:4: error: implicit declaration of function 'free_irq'
drivers/staging/rtl8187se/r8180_core.c:4026:3: error: implicit declaration of function 'tasklet_schedule'
drivers/staging/rtl8192e/ieee80211/ieee80211.h:2000:24: error: field 'ps_task' has incomplete type
drivers/staging/rtl8192e/r8192E.h:909:24: error: field 'irq_rx_tasklet' has incomplete type
drivers/staging/rtl8192e/r8192E.h:910:24: error: field 'irq_tx_tasklet' has incomplete type
drivers/staging/rtl8192e/r8192E.h:911:31: error: field 'irq_prepare_beacon_tasklet' has incomplete type
drivers/staging/rtl8192e/r8192E_core.c:2008:2: error: implicit declaration of function 'tasklet_init'
drivers/staging/rtl8192e/r8192E_core.c:2412:54: error: 'IRQF_SHARED' undeclared (first use in this function)
drivers/staging/rtl8192e/r8192E_core.c:2412:9: error: implicit declaration of function 'request_irq'
drivers/staging/rtl8192e/r8192E_core.c:4640:4: error: implicit declaration of function 'free_irq'
drivers/staging/rtl8192e/r8192E_core.c:620:2: error: implicit declaration of function 'synchronize_irq'
drivers/staging/rtl8192e/r8192E_core.c:913:3: error: implicit declaration of function 'tasklet_schedule'
drivers/staging/rtl8192u/ieee80211/ieee80211.h:1993:24: error: field 'ps_task' has incomplete type
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch was generated by the following semantic patch:
// <smpl>
@@ expression E; @@
- if (E != NULL) { kfree(E); }
+ kfree(E);
@@ expression E; @@
- if (E != NULL) { kfree(E); E = NULL; }
+ kfree(E);
+ E = NULL;
// </smpl>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes a duplicate include directive in
drivers/staging/rtl8187se/ieee80211/ieee80211.h.
Signed-off-by: Andre Nogueira <andre.neo.net@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Obviously the wrong spelling was copied a lot of times.
A similar patch for the non-staging part of linux
is committed by Jiri Kosina.
Cc: devel@driverdev.osuosl.org
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use kmemdup when some other buffer is immediately copied into the
allocated region.
A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression from,to,size,flag;
statement S;
@@
- to = \(kmalloc\|kzalloc\)(size,flag);
+ to = kmemdup(from,size,flag);
if (to==NULL || ...) S
- memcpy(to, from, size);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use kcalloc or kzalloc rather than the combination of kmalloc and memset.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x,y,flags;
statement S;
type T;
@@
x =
- kmalloc
+ kcalloc
(
- y * sizeof(T),
+ y, sizeof(T),
flags);
if (x == NULL) S
-memset(x, 0, y * sizeof(T));
@@
expression x,size,flags;
statement S;
@@
-x = kmalloc(size,flags);
+x = kzalloc(size,flags);
if (x == NULL) S
-memset(x, 0, size);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Drop cast on the result of kmalloc and similar functions.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
type T;
@@
- (T *)
(\(kmalloc\|kzalloc\|kcalloc\|kmem_cache_alloc\|kmem_cache_zalloc\|
kmem_cache_alloc_node\|kmalloc_node\|kzalloc_node\)(...))
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Toggling the link carrier is a non sense and is the grossest locking I can
think of. Moreover, it's giving a completely inaccurate status to userspace
who could for example decide to turn the interface down on carrier off
detection.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If we're not associated, we should not send wireless events to let userspace
know that we just left an ESSID, simply because we havent yet joined it.
If we keep on doing that, wpa_supplicant could receive such events while
actually trying to join an ESSID, and thus decide to stop trying. This leads
to a lot of connection failures as this driver seems to be sending GIWAP
events quite a lot.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Getting a probe response after sending a probe request to a specific SSID
doesnt mean we're trying to associate with this SSID.
wpa_supplicant should be the only one deciding when to join an SSID, not the
kernel.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
There were a number of patches that went into Linus's
tree already that conflicted with other changes in the
staging branch. This merge resolves those merge conflicts.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
rtl8187se needs to include semaphore.h to prevent build errors:
drivers/staging/rtl8187se/ieee80211/ieee80211.h:1004: error: field 'wx_sem' has incomplete type
drivers/staging/rtl8187se/ieee80211/ieee80211.h:1005: error: field 'scan_sem' has incomplete type
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
String constants that are continued on subsequent lines with \
are not good.
Fixed a "is tryied" / tried typo
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Uncompiled. Doesn't currently build anyway.
Converted MAC_FMT to %pM
Converted some %02x%02x%02x%02x%02x%02x to %pm
Converted MAC_ARG to direct use
Removed MAC_FMT and MAC_ARG macros
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In wireless-testing, commit 7044cc56 added struct ieee80211_hdr_3addr
to include/linux/ieee80211.h. This definition collides with one that is
in the r8187se driver in staging.
The conflict is resolved by changing r8187se to use the definition from
include/linuc/ieee80211.h.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This patch fixes compilation problems that were caused by function
naming conflicts between the rtl8187se driver and the mac80211 stack.
Signed-off-by: George Kadianakis <desnacked at gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
On rtl81* additions, they had its wireless stack made builtin instead of
separated modules. But try_module_get/module_put in stack were kept,
they are uneeded with the stack builtin and makes rtl81* modules
impossible to remove on a system with an rtl81* card. request_module
calls are also uneeded with stack builtin, so remove them too.
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Reorder the code in ieee80211.h for easier comparisions with
rtl8192su's version of the file.
While at it:
* use IEEE80211_4ADDR_LEN for IEEE80211_LEN definition
* remove unused country_code_type_t typedef
* make some minor coding style fixes
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
While at it:
* remove some commented out code
* remove some unused definitions
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Rename struct ieee80211_hdr_QOS to struct ieee80211_hdr_4addrqos
and QOS_ctl field to qos_ctl (to match the naming used by rtl8192su).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Rename struct ieee80211_hdr_3addr_QOS to struct ieee80211_hdr_3addrqos
and QOS_ctl field to qos_ctl (to match the naming used by rtl8192su).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ieee80211_hdr name is too generic so use ieee80211_hdr_4addr one instead
(which matches the naming used by rtl8192su driver).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>