Commit graph

3280 commits

Author SHA1 Message Date
Mel Gorman
1fc28b70fe page-allocator: allow too high-order warning messages to be suppressed with __GFP_NOWARN
The page allocator warns once when an order >= MAX_ORDER is specified.
This is to catch callers of the allocator that are always falling back to
their worst-case when it was not expected.  However, there are cases where
the caller is behaving correctly but cannot suppress the warning.  This
patch allows the warning to be suppressed by the callers by specifying
__GFP_NOWARN.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-29 19:10:35 -07:00
KAMEZAWA Hiroyuki
887032670d cgroup avoid permanent sleep at rmdir
After commit ec64f51545 ("cgroup: fix
frequent -EBUSY at rmdir"), cgroup's rmdir (especially against memcg)
doesn't return -EBUSY by temporary ref counts.  That commit expects all
refs after pre_destroy() is temporary but...it wasn't.  Then, rmdir can
wait permanently.  This patch tries to fix that and change followings.

 - set CGRP_WAIT_ON_RMDIR flag before pre_destroy().
 - clear CGRP_WAIT_ON_RMDIR flag when the subsys finds racy case.
   if there are sleeping ones, wakes them up.
 - rmdir() sleeps only when CGRP_WAIT_ON_RMDIR flag is set.

Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reported-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reviewed-by: Paul Menage <menage@google.com>
Acked-by: Balbir Sigh <balbir@linux.vnet.ibm.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-29 19:10:35 -07:00
Eric Sandeen
e4c6f8bed0 hugetlbfs: fix i_blocks accounting
As reported in Red Hat bz #509671, i_blocks for files on hugetlbfs get
accounting wrong when doing something like:

   $ > foo
   $ date  > foo
   date: write error: Invalid argument
   $ /usr/bin/stat foo
     File: `foo'
     Size: 0          Blocks: 18446744073709547520 IO Block: 2097152 regular
...

This is because hugetlb_unreserve_pages() is unconditionally removing
blocks_per_huge_page(h) on each call rather than using the freed amount.
If there were 0 blocks, it goes negative, resulting in the above.

This is a regression from commit a551643895
("hugetlb: modular state for hugetlb page size")

which did:

-	inode->i_blocks -= BLOCKS_PER_HUGEPAGE * freed;
+	inode->i_blocks -= blocks_per_huge_page(h);

so just put back the freed multiplier, and it's all happy again.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: Andi Kleen <andi@firstfloor.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-29 19:10:35 -07:00
David Rientjes
6583bb64fc mm: avoid endless looping for oom killed tasks
If a task is oom killed and still cannot find memory when trying with
no watermarks, it's better to fail the allocation attempt than to loop
endlessly.  Direct reclaim has already failed and the oom killer will
be a no-op since current has yet to die, so there is no other
alternative for allocations that are not __GFP_NOFAIL.

Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-29 19:10:34 -07:00
Mel Gorman
e084b2d95e page-allocator: preserve PFN ordering when __GFP_COLD is set
Fix a post-2.6.24 performace regression caused by
3dfa5721f1 ("page-allocator: preserve PFN
ordering when __GFP_COLD is set").

Narayanan reports "The regression is around 15%.  There is no disk controller
as our setup is based on Samsung OneNAND used as a memory mapped device on a
OMAP2430 based board."

The page allocator tries to preserve contiguous PFN ordering when returning
pages such that repeated callers to the allocator have a strong chance of
getting physically contiguous pages, particularly when external fragmentation
is low.  However, of the bulk of the allocations have __GFP_COLD set as they
are due to aio_read() for example, then the PFNs are in reverse PFN order.
This can cause performance degration when used with IO controllers that could
have merged the requests.

This patch attempts to preserve the contiguous ordering of PFNs for users of
__GFP_COLD.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Reported-by: Narayananu Gopalakrishnan <narayanan.g@samsung.com>
Tested-by: Narayanan Gopalakrishnan <narayanan.g@samsung.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-29 19:10:34 -07:00
Catalin Marinas
f5886c7f96 kmemleak: Protect the seq start/next/stop sequence by rcu_read_lock()
Objects passed to kmemleak_seq_next() have an incremented reference
count (hence not freed) but they may point via object_list.next to
other freed objects. To avoid this, the whole start/next/stop sequence
must be protected by rcu_read_lock().

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-29 12:34:58 -07:00
Benjamin Herrenschmidt
9e1b32caa5 mm: Pass virtual address to [__]p{te,ud,md}_free_tlb()
mm: Pass virtual address to [__]p{te,ud,md}_free_tlb()

Upcoming paches to support the new 64-bit "BookE" powerpc architecture
will need to have the virtual address corresponding to PTE page when
freeing it, due to the way the HW table walker works.

Basically, the TLB can be loaded with "large" pages that cover the whole
virtual space (well, sort-of, half of it actually) represented by a PTE
page, and which contain an "indirect" bit indicating that this TLB entry
RPN points to an array of PTEs from which the TLB can then create direct
entries. Thus, in order to invalidate those when PTE pages are deleted,
we need the virtual address to pass to tlbilx or tlbivax instructions.

The old trick of sticking it somewhere in the PTE page struct page sucks
too much, the address is almost readily available in all call sites and
almost everybody implemets these as macros, so we may as well add the
argument everywhere. I added it to the pmd and pud variants for consistency.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: David Howells <dhowells@redhat.com> [MN10300 & FRV]
Acked-by: Nick Piggin <npiggin@suse.de>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-27 12:10:38 -07:00
Linus Torvalds
7638d5322b Merge branch 'kmemleak' of git://linux-arm.org/linux-2.6
* 'kmemleak' of git://linux-arm.org/linux-2.6:
  kmemleak: Remove alloc_bootmem annotations introduced in the past
  kmemleak: Add callbacks to the bootmem allocator
  kmemleak: Allow partial freeing of memory blocks
  kmemleak: Trace the kmalloc_large* functions in slub
  kmemleak: Scan objects allocated during a scanning episode
  kmemleak: Do not acquire scan_mutex in kmemleak_open()
  kmemleak: Remove the reported leaks number limitation
  kmemleak: Add more cond_resched() calls in the scanning thread
  kmemleak: Renice the scanning thread to +10
2009-07-12 12:24:35 -07:00
Jens Axboe
8aa7e847d8 Fix congestion_wait() sync/async vs read/write confusion
Commit 1faa16d228 accidentally broke
the bdi congestion wait queue logic, causing us to wait on congestion
for WRITE (== 1) when we really wanted BLK_RW_ASYNC (== 0) instead.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-10 20:31:53 +02:00
Catalin Marinas
264ef8a904 kmemleak: Remove alloc_bootmem annotations introduced in the past
kmemleak_alloc() calls were added in some places where alloc_bootmem was
called. Since now kmemleak tracks bootmem allocations, these explicit
calls should be run.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-07-09 17:07:02 +01:00
Catalin Marinas
ec3a354bd4 kmemleak: Add callbacks to the bootmem allocator
This patch adds kmemleak_alloc/free callbacks to the bootmem allocator.
This would allow scanning of such blocks and help avoiding a whole class
of false positives and more kmemleak annotations.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
2009-07-08 14:25:14 +01:00
Catalin Marinas
53238a60dd kmemleak: Allow partial freeing of memory blocks
Functions like free_bootmem() are allowed to free only part of a memory
block. This patch adds support for this via the kmemleak_free_part()
callback which removes the original object and creates one or two
additional objects as a result of the memory block split.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-07-08 14:25:14 +01:00
Catalin Marinas
e4f7c0b44a kmemleak: Trace the kmalloc_large* functions in slub
The kmalloc_large() and kmalloc_large_node() functions were missed when
adding the kmemleak hooks to the slub allocator. However, they should be
traced to avoid false positives.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-07-08 14:25:14 +01:00
Catalin Marinas
2587362eaf kmemleak: Scan objects allocated during a scanning episode
Many of the false positives in kmemleak happen on busy systems where
objects are allocated during a kmemleak scanning episode. These objects
aren't scanned by default until the next memory scan. When such object
is added, for example, at the head of a list, it is possible that all
the other objects in the list become unreferenced until the next scan.

This patch adds checking for newly allocated objects at the end of the
scan and repeats the scanning on these objects. If Linux allocates
new objects at a higher rate than their scanning, it stops after a
predefined number of passes.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-08 14:25:13 +01:00
Catalin Marinas
b87324d082 kmemleak: Do not acquire scan_mutex in kmemleak_open()
Initially, the scan_mutex was acquired in kmemleak_open() and released
in kmemleak_release() (corresponding to /sys/kernel/debug/kmemleak
operations). This was causing some lockdep reports when the file was
closed from a different task than the one opening it. This patch moves
the scan_mutex acquiring in kmemleak_write() or kmemleak_seq_start()
with releasing in kmemleak_seq_stop().

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-08 14:25:13 +01:00
Catalin Marinas
288c857d66 kmemleak: Remove the reported leaks number limitation
Since the leaks are no longer printed to the syslog, there is no point
in keeping this limitation. All the suspected leaks are shown on
/sys/kernel/debug/kmemleak file.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-08 14:25:12 +01:00
Catalin Marinas
4b8a96744c kmemleak: Add more cond_resched() calls in the scanning thread
Following recent fix to no longer reschedule in the scan_block()
function, the system may become unresponsive with !PREEMPT. This patch
re-adds the cond_resched() call to scan_block() but conditioned by the
allow_resched parameter.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
2009-07-07 10:32:56 +01:00
Catalin Marinas
bf2a76b317 kmemleak: Renice the scanning thread to +10
This is a long-running thread but not high-priority. So it makes sense
to renice it to +10.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-07 10:32:55 +01:00
Linus Torvalds
9861df15f4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  SLAB: Fix lockdep annotations
  fix RCU-callback-after-kmem_cache_destroy problem in sl[aou]b
2009-07-06 14:05:09 -07:00
Kevin Cernekee
5bfd756097 Fix virt_to_phys() warnings
These warnings were observed on MIPS32 using 2.6.31-rc1 and gcc-4.2.0:

mm/page_alloc.c: In function 'alloc_pages_exact':
mm/page_alloc.c:1986: warning: passing argument 1 of 'virt_to_phys' makes pointer from integer without a cast

drivers/usb/mon/mon_bin.c: In function 'mon_alloc_buff':
drivers/usb/mon/mon_bin.c:1264: warning: passing argument 1 of 'virt_to_phys' makes pointer from integer without a cast

[akpm@linux-foundation.org: fix kernel/perf_counter.c too]
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-06 13:57:03 -07:00
Josef Bacik
c8236db9cd mm: mark page accessed before we write_end()
In testing a backport of the write_begin/write_end AOPs, a 10% re-read
regression was noticed when running iozone.  This regression was
introduced because the old AOPs would always do a mark_page_accessed(page)
after the commit_write, but when the new AOPs where introduced, the only
place this was kept was in pagecache_write_end().

This patch does the same thing in the generic case as what is done in
pagecache_write_end(), which is just to mark the page accessed before we
do write_end().

Signed-off-by: Josef Bacik <jbacik@redhat.com>
Acked-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-06 13:57:03 -07:00
Pekka Enberg
67fc25ef34 Merge branch 'slab/urgent' into for-linus 2009-07-06 10:51:54 +03:00
Linus Torvalds
5a475ce469 Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: LCDC dcache flush for deferred io
  sh: Fix compiler error and include the definition of IS_ERR_VALUE
  sh: re-add LCDC fbdev support to the Migo-R defconfig
  sh: fix se7724 ceu names
  sh: ms7724se: Enable sh_eth in defconfig.
  arch/sh/boards/mach-se/7206/io.c: Remove unnecessary semicolons
  sh: ms7724se: Add sh_eth support
  nommu: provide follow_pfn().
  sh: Kill off unused DEBUG_BOOTMEM symbol.
  perf_counter tools: add cpu_relax()/rmb() definitions for sh.
  sh64: Hook up page fault events for software perf counters.
  sh: Hook up page fault events for software perf counters.
  sh: make set_perf_counter_pending() static inline.
  clocksource: sh_tmu: Make undefined TCOR behaviour less undefined.
2009-07-01 11:46:30 -07:00
Ingo Molnar
57d81f6f39 kmemleak: Fix scheduling-while-atomic bug
One of the kmemleak changes caused the following
scheduling-while-holding-the-tasklist-lock regression on x86:

BUG: sleeping function called from invalid context at mm/kmemleak.c:795
in_atomic(): 1, irqs_disabled(): 0, pid: 1737, name: kmemleak
2 locks held by kmemleak/1737:
 #0:  (scan_mutex){......}, at: [<c10c4376>] kmemleak_scan_thread+0x45/0x86
 #1:  (tasklist_lock){......}, at: [<c10c3bb4>] kmemleak_scan+0x1a9/0x39c
Pid: 1737, comm: kmemleak Not tainted 2.6.31-rc1-tip #59266
Call Trace:
 [<c105ac0f>] ? __debug_show_held_locks+0x1e/0x20
 [<c102e490>] __might_sleep+0x10a/0x111
 [<c10c38d5>] scan_yield+0x17/0x3b
 [<c10c3970>] scan_block+0x39/0xd4
 [<c10c3bc6>] kmemleak_scan+0x1bb/0x39c
 [<c10c4331>] ? kmemleak_scan_thread+0x0/0x86
 [<c10c437b>] kmemleak_scan_thread+0x4a/0x86
 [<c104d73e>] kthread+0x6e/0x73
 [<c104d6d0>] ? kthread+0x0/0x73
 [<c100959f>] kernel_thread_helper+0x7/0x10
kmemleak: 834 new suspected memory leaks (see /sys/kernel/debug/kmemleak)

The bit causing it is highly dubious:

static void scan_yield(void)
{
        might_sleep();

        if (time_is_before_eq_jiffies(next_scan_yield)) {
                schedule();
                next_scan_yield = jiffies + jiffies_scan_yield;
        }
}

It called deep inside the codepath and in a conditional way,
and that is what crapped up when one of the new scan_block()
uses grew a tasklist_lock dependency.

This minimal patch removes that yielding stuff and adds the
proper cond_resched().

The background scanning thread could probably also be reniced
to +10.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-01 10:26:23 -07:00
Linus Torvalds
e83c2b0ff3 Merge branch 'kmemleak' of git://linux-arm.org/linux-2.6
* 'kmemleak' of git://linux-arm.org/linux-2.6:
  kmemleak: Inform kmemleak about pid_hash
  kmemleak: Do not warn if an unknown object is freed
  kmemleak: Do not report new leaked objects if the scanning was stopped
  kmemleak: Slightly change the policy on newly allocated objects
  kmemleak: Do not trigger a scan when reading the debug/kmemleak file
  kmemleak: Simplify the reports logged by the scanning thread
  kmemleak: Enable task stacks scanning by default
  kmemleak: Allow the early log buffer to be configurable.
2009-06-30 19:04:53 -07:00
Yinghai Lu
66918dcdf9 x86: only clear node_states for 64bit
Nathan reported that

| commit 73d60b7f74
| Author: Yinghai Lu <yinghai@kernel.org>
| Date:   Tue Jun 16 15:33:00 2009 -0700
|
|    page-allocator: clear N_HIGH_MEMORY map before we set it again
|
|    SRAT tables may contains nodes of very small size.  The arch code may
|    decide to not activate such a node.  However, currently the early boot
|    code sets N_HIGH_MEMORY for such nodes.  These nodes therefore seem to be
|    active although these nodes have no present pages.
|
|    For 64bit N_HIGH_MEMORY == N_NORMAL_MEMORY, so that works for 64 bit too

unintentionally and incorrectly clears the cpuset.mems cgroup attribute on
an i386 kvm guest, meaning that cpuset.mems can not be used.

Fix this by only clearing node_states[N_NORMAL_MEMORY] for 64bit only.
and need to do save/restore for that in find_zone_movable_pfn

Reported-by: Nathan Lynch <ntl@pobox.com>
Tested-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>,
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-30 18:56:01 -07:00
Richard Kennedy
d7831a0bdf mm: prevent balance_dirty_pages() from doing too much work
balance_dirty_pages can overreact and move all of the dirty pages to
writeback unnecessarily.

balance_dirty_pages makes its decision to throttle based on the number of
dirty plus writeback pages that are over the calculated limit,so it will
continue to move pages even when there are plenty of pages in writeback
and less than the threshold still dirty.

This allows it to overshoot its limits and move all the dirty pages to
writeback while waiting for the drives to catch up and empty the writeback
list.

A simple fio test easily demonstrates this problem.

fio --name=f1 --directory=/disk1 --size=2G -rw=write --name=f2 --directory=/disk2 --size=1G --rw=write --startdelay=10

This is the simplest fix I could find, but I'm not entirely sure that it
alone will be enough for all cases.  But it certainly is an improvement on
my desktop machine writing to 2 disks.

Do we need something more for machines with large arrays where
bdi_threshold * number_of_drives is greater than the dirty_ratio ?

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-30 18:56:01 -07:00
Thomas Gleixner
c49568235d dmapools: protect page_list walk in show_pools()
show_pools() walks the page_list of a pool w/o protection against the list
modifications in alloc/free.  Take pool->lock to avoid stomping into
nirvana.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-30 18:56:00 -07:00
Catalin Marinas
b6e687221e kmemleak: Do not warn if an unknown object is freed
vmap'ed memory blocks are not tracked by kmemleak (yet) but they may be
released with vfree() which is tracked. The corresponding kmemleak
warning is only enabled in debug mode. Future patch will add support for
ioremap and vmap.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-06-29 17:14:14 +01:00
Catalin Marinas
17bb9e0d90 kmemleak: Do not report new leaked objects if the scanning was stopped
If the scanning was stopped with a signal, it is possible that some
objects are left with a white colour (potential leaks) and reported. Add
a check to avoid reporting such objects.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-06-29 17:14:13 +01:00
Pekka Enberg
ec5a36f94e SLAB: Fix lockdep annotations
Commit 8429db5... ("slab: setup cpu caches later on when interrupts are
enabled") broke mm/slab.c lockdep annotations:

  [   11.554715] =============================================
  [   11.555249] [ INFO: possible recursive locking detected ]
  [   11.555560] 2.6.31-rc1 #896
  [   11.555861] ---------------------------------------------
  [   11.556127] udevd/1899 is trying to acquire lock:
  [   11.556436]  (&nc->lock){-.-...}, at: [<ffffffff810c337f>] kmem_cache_free+0xcd/0x25b
  [   11.557101]
  [   11.557102] but task is already holding lock:
  [   11.557706]  (&nc->lock){-.-...}, at: [<ffffffff810c3cd0>] kfree+0x137/0x292
  [   11.558109]
  [   11.558109] other info that might help us debug this:
  [   11.558720] 2 locks held by udevd/1899:
  [   11.558983]  #0:  (&nc->lock){-.-...}, at: [<ffffffff810c3cd0>] kfree+0x137/0x292
  [   11.559734]  #1:  (&parent->list_lock){-.-...}, at: [<ffffffff810c36c7>] __drain_alien_cache+0x3b/0xbd
  [   11.560442]
  [   11.560443] stack backtrace:
  [   11.561009] Pid: 1899, comm: udevd Not tainted 2.6.31-rc1 #896
  [   11.561276] Call Trace:
  [   11.561632]  [<ffffffff81065ed6>] __lock_acquire+0x15ec/0x168f
  [   11.561901]  [<ffffffff81065f60>] ? __lock_acquire+0x1676/0x168f
  [   11.562171]  [<ffffffff81063c52>] ? trace_hardirqs_on_caller+0x113/0x13e
  [   11.562490]  [<ffffffff8150c337>] ? trace_hardirqs_on_thunk+0x3a/0x3f
  [   11.562807]  [<ffffffff8106603a>] lock_acquire+0xc1/0xe5
  [   11.563073]  [<ffffffff810c337f>] ? kmem_cache_free+0xcd/0x25b
  [   11.563385]  [<ffffffff8150c8fc>] _spin_lock+0x31/0x66
  [   11.563696]  [<ffffffff810c337f>] ? kmem_cache_free+0xcd/0x25b
  [   11.563964]  [<ffffffff810c337f>] kmem_cache_free+0xcd/0x25b
  [   11.564235]  [<ffffffff8109bf8c>] ? __free_pages+0x1b/0x24
  [   11.564551]  [<ffffffff810c3564>] slab_destroy+0x57/0x5c
  [   11.564860]  [<ffffffff810c3641>] free_block+0xd8/0x123
  [   11.565126]  [<ffffffff810c372e>] __drain_alien_cache+0xa2/0xbd
  [   11.565441]  [<ffffffff810c3ce5>] kfree+0x14c/0x292
  [   11.565752]  [<ffffffff8144a007>] skb_release_data+0xc6/0xcb
  [   11.566020]  [<ffffffff81449cf0>] __kfree_skb+0x19/0x86
  [   11.566286]  [<ffffffff81449d88>] consume_skb+0x2b/0x2d
  [   11.566631]  [<ffffffff8144cbe0>] skb_free_datagram+0x14/0x3a
  [   11.566901]  [<ffffffff81462eef>] netlink_recvmsg+0x164/0x258
  [   11.567170]  [<ffffffff81443461>] sock_recvmsg+0xe5/0xfe
  [   11.567486]  [<ffffffff810ab063>] ? might_fault+0xaf/0xb1
  [   11.567802]  [<ffffffff81053a78>] ? autoremove_wake_function+0x0/0x38
  [   11.568073]  [<ffffffff810d84ca>] ? core_sys_select+0x3d/0x2b4
  [   11.568378]  [<ffffffff81065f60>] ? __lock_acquire+0x1676/0x168f
  [   11.568693]  [<ffffffff81442dc1>] ? sockfd_lookup_light+0x1b/0x54
  [   11.568961]  [<ffffffff81444416>] sys_recvfrom+0xa3/0xf8
  [   11.569228]  [<ffffffff81063c8a>] ? trace_hardirqs_on+0xd/0xf
  [   11.569546]  [<ffffffff8100af2b>] system_call_fastpath+0x16/0x1b#

Fix that up.

Closes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=13654
Tested-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-06-29 09:57:10 +03:00
Linus Torvalds
8326e284f8 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, delay: tsc based udelay should have rdtsc_barrier
  x86, setup: correct include file in <asm/boot.h>
  x86, setup: Fix typo "CONFIG_x86_64" in <asm/boot.h>
  x86, mce: percpu mcheck_timer should be pinned
  x86: Add sysctl to allow panic on IOCK NMI error
  x86: Fix uv bau sending buffer initialization
  x86, mce: Fix mce resume on 32bit
  x86: Move init_gbpages() to setup_arch()
  x86: ensure percpu lpage doesn't consume too much vmalloc space
  x86: implement percpu_alloc kernel parameter
  x86: fix pageattr handling for lpage percpu allocator and re-enable it
  x86: reorganize cpa_process_alias()
  x86: prepare setup_pcpu_lpage() for pageattr fix
  x86: rename remap percpu first chunk allocator to lpage
  x86: fix duplicate free in setup_pcpu_remap() failure path
  percpu: fix too lazy vunmap cache flushing
  x86: Set cpu_llc_id on AMD CPUs
2009-06-28 11:05:28 -07:00
Catalin Marinas
acf4968ec9 kmemleak: Slightly change the policy on newly allocated objects
Newly allocated objects are more likely to be reported as false
positives. Kmemleak ignores the reporting of objects younger than 5
seconds. However, this age was calculated after the memory scanning
completed which usually takes longer than 5 seconds. This patch
make the minimum object age calculation in relation to the start of the
memory scanning.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-06-26 17:38:29 +01:00
Catalin Marinas
4698c1f2bb kmemleak: Do not trigger a scan when reading the debug/kmemleak file
Since there is a kernel thread for automatically scanning the memory, it
makes sense for the debug/kmemleak file to only show its findings. This
patch also adds support for "echo scan > debug/kmemleak" to trigger an
intermediate memory scan and eliminates the kmemleak_mutex (scan_mutex
covers all the cases now).

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-06-26 17:38:27 +01:00
Catalin Marinas
bab4a34afc kmemleak: Simplify the reports logged by the scanning thread
Because of false positives, the memory scanning thread may print too
much information. This patch changes the scanning thread to only print
the number of newly suspected leaks. Further information can be read
from the /sys/kernel/debug/kmemleak file.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-06-26 17:38:26 +01:00
Catalin Marinas
e0a2a1601b kmemleak: Enable task stacks scanning by default
This is to reduce the number of false positives reported.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-06-26 17:38:25 +01:00
Paul E. McKenney
7ed9f7e5db fix RCU-callback-after-kmem_cache_destroy problem in sl[aou]b
Jesper noted that kmem_cache_destroy() invokes synchronize_rcu() rather than
rcu_barrier() in the SLAB_DESTROY_BY_RCU case, which could result in RCU
callbacks accessing a kmem_cache after it had been destroyed.

Cc: <stable@kernel.org>
Acked-by: Matt Mackall <mpm@selenic.com>
Reported-by: Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-06-26 12:10:47 +03:00
Paul Mundt
dfc2f91ac2 nommu: provide follow_pfn().
With the introduction of follow_pfn() as an exported symbol, modules have
begun making use of it. Unfortunately this was not reflected on nommu at
the time, so the in-tree users have subsequently all blown up with link
errors there.

This provides a simple follow_pfn() that just returns addr >> PAGE_SHIFT,
which will do the right thing on nommu. There is no need to do range
checking within the vma, as the find_vma() case will already take care of
this.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-26 04:31:57 +09:00
Peter Zijlstra
9d73777e50 clarify get_user_pages() prototype
Currently the 4th parameter of get_user_pages() is called len, but its
in pages, not bytes. Rename the thing to nr_pages to avoid future
confusion.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-25 11:22:13 -07:00
Catalin Marinas
a9d9058aba kmemleak: Allow the early log buffer to be configurable.
(feature suggested by Sergey Senozhatsky)

Kmemleak needs to track all the memory allocations but some of these
happen before kmemleak is initialised. These are stored in an internal
buffer which may be exceeded in some kernel configurations. This patch
adds a configuration option with a default value of 400 and also removes
the stack dump when the early log buffer is exceeded.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@mail.by>
2009-06-25 10:16:13 +01:00
Linus Torvalds
c622304825 Merge branches 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/{vfs-2.6,audit-current}
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  another race fix in jfs_check_acl()
  Get "no acls for this inode" right, fix shmem breakage
  inline functions left without protection of ifdef (acl)

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
  audit: inode watches depend on CONFIG_AUDIT not CONFIG_AUDIT_SYSCALL
2009-06-24 14:17:14 -07:00
Al Viro
72c04902d1 Get "no acls for this inode" right, fix shmem breakage
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-24 16:58:48 -04:00
Pekka Enberg
ba52270d18 SLUB: Don't pass __GFP_FAIL for the initial allocation
SLUB uses higher order allocations by default but falls back to small
orders under memory pressure. Make sure the GFP mask used in the initial
allocation doesn't include __GFP_NOFAIL.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-24 12:20:14 -07:00
Linus Torvalds
4923abf9f1 Don't warn about order-1 allocations with __GFP_NOFAIL
Traditionally, we never failed small orders (even regardless of any
__GFP_NOFAIL flags), and slab will allocate order-1 allocations even for
small allocations that could fit in a single page (in order to avoid
excessive fragmentation).

Maybe we should remove this warning entirely, but before making that
judgement, at least limit it to bigger allocations.

Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-24 12:16:49 -07:00
Al Viro
06b16e9f68 switch shmem to inode->i_acl
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-24 08:17:06 -04:00
Dimitri Sivanich
364df0ebfb mm: fix handling of pagesets for downed cpus
After downing/upping a cpu, an attempt to set
/proc/sys/vm/percpu_pagelist_fraction results in an oops in
percpu_pagelist_fraction_sysctl_handler().

If a processor is downed then we need to set the pageset pointer back to
the boot pageset.

Updates of the high water marks should not access pagesets of unpopulated
zones (those pointer go to the boot pagesets which would be no longer
functional if their size would be increased beyond zero).

Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Christoph Lameter <cl@linux-foundation.org>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-23 12:50:05 -07:00
Hugh Dickins
a5c9b696ec mm: pass mm to grab_swap_token
If a kthread happens to use get_user_pages() on an mm (as KSM does),
there's a chance that it will end up trying to read in a swap page, then
oops in grab_swap_token() because the kthread has no mm: GUP passes down
the right mm, so grab_swap_token() ought to be using it.

We have not identified a stronger case than KSM's daemon (not yet in
mainline), but the issue must have come up before, since RHEL has included
a fix for this for years (though a different fix, they just back out of
grab_swap_token if current->mm is unset: which is what we first proposed,
but using the right mm here seems more correct).

Reported-by: Izik Eidus <ieidus@redhat.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-23 12:50:05 -07:00
Linus Torvalds
95b3692d9c Merge branch 'kmemleak' of git://linux-arm.org/linux-2.6
* 'kmemleak' of git://linux-arm.org/linux-2.6:
  kmemleak: Do not force the slab debugging Kconfig options
  kmemleak: use pr_fmt
2009-06-23 11:25:04 -07:00
Hugh Dickins
d26ed650d9 mm: don't rely on flags coincidence
Indeed FOLL_WRITE matches FAULT_FLAG_WRITE, matches GUP_FLAGS_WRITE,
and it's tempting to devise a set of Grand Unified Paging flags;
but not today.  So until then, let's rely upon the compiler to spot
the coincidence, "rather than have that subtle dependency and a
comment for it" - as you remarked in another context yesterday.

Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-23 11:23:33 -07:00
Hugh Dickins
788c7df451 hugetlb: fault flags instead of write_access
handle_mm_fault() is now passing fault flags rather than write_access
down to hugetlb_fault(), so better recognize that in hugetlb_fault(),
and in hugetlb_no_page().

Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-23 11:23:33 -07:00