Commit graph

2444 commits

Author SHA1 Message Date
Sergei Shtylyov
ecf3a31d2a ide: turn set_irq() method into write_devctl() method
Turn set_irq() method with its software reset hack into write_devctl() method
(for just writing a value into the device control register) at last...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:30 +02:00
Sergei Shtylyov
4d74c3fcf2 ide: use ATA_HOB
Make use of ATA_HOB instead of hard-coded value in the tf_read() method.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:29 +02:00
Sergei Shtylyov
47ab834854 ide-disk: use ATA_ERR
Make use of ATA_ERR instead of hard-coded value in idedisk_set_max_address()
and idedisk_read_native_max_address().

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:29 +02:00
Sergei Shtylyov
74638c8482 ide: add support for CFA specified transfer modes (take 3)
Add support for the CompactFlash specific PIO modes 5/6 and MWDMA modes 3/4.

Since there were no PIO5 capable hard drives produced and one would also need
66 MHz IDE clock to actually get the difference WRT the address setup timings
programmed, I decided to simply replace the old non-standard PIO mode 5 timings
with the CFA specified ones.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: stf_xl@wp.pl
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:28 +02:00
Sergei Shtylyov
c4199930b1 ide-iops: only clear DMA words on setting DMA mode
The bytes indicating current DMA mode in the identify data words 62, 63, and 88
should only change on setting a DMA mode, so stop clearing them  on setting PIO
mode in ide_config_drive_speed().  While at it, correct SW/MW DMA mode masks...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:27 +02:00
Sergei Shtylyov
8d64fcd935 ide: identify data word 53 bit 1 doesn't cover words 62 and 63 (take 3)
The IDE code assumed for years that the bit 1 of the identify data word 53 also
covers the validity of the SW/MW DMA information in words 62 and 63, but it has
always covered only words 64 thru 70, with words 62 and 63 being defined in the
original ATA spec, not in ATA-2...

This fix however should only concern *very* old hard disks and rather old CF
cards...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:27 +02:00
Sergei Shtylyov
985232e388 au1xxx-ide: auide_{in|out}sw() should be static
Make auide_{insw|outsw}() 'static' and mark them 'inline' as there's only one
call site for each: in the driver's {in|out}put_data() methods respectively...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:27 +02:00
Bartlomiej Zolnierkiewicz
349d12a1fe ide-floppy: use ide_pio_bytes()
* Fix ide_init_sg_cmd() setup for non-fs requests.

* Convert ide_pc_intr() to use ide_pio_bytes() for floppy media.

* Remove no longer needed ide_io_buffers() and sg/sg_cnt fields
  from struct ide_atapi_pc.

* Remove partial completions; kill idefloppy_update_buffers(), as a
  result.

* Add some more debugging statements.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:26 +02:00
Bartlomiej Zolnierkiewicz
d93bc4521c ide-{floppy,tape}: fix padding for PIO transfers
* Return number of bytes left to transfer from idetape_{in,out}put_buffers()
  and number of bytes done from ide_tape_io_buffers().

* Fix padding for PIO transfers in ide_pc_intr() so read/write buffers are
  always completely processed and then the transfer is padded if necessary.

* Remove invalid error messages.

* Remove now superfluous padding from ide{_io_buffers,tape_input_buffers}().

While at it:

* Set pc->bh to NULL in idetape_input_buffers() after all bh-s are done.

* Cache !!(pc->flags & PC_FLAG_WRITING) in local variable in ide_pc_intr().

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:26 +02:00
Bartlomiej Zolnierkiewicz
9f5af4d667 ide: remove CONFIG_BLK_DEV_IDEDOUBLER config option
Nowadays it is not worth having a separate config option for
Amiga IDE Doubler support so always include it (it still needs
to be explicitly enabled by module parameter).

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:26 +02:00
Bartlomiej Zolnierkiewicz
41fa9f863b ide: decrease size of ->pc_buf field in struct ide_atapi_pc
struct ide_atapi_pc is often allocated on the stack and size of ->pc_buf
size is 256 bytes.  However since only ide_floppy_create_read_capacity_cmd()
and idetape_create_inquiry_cmd() require such size allocate buffers for
these pc-s explicitely and decrease ->pc_buf size to 64 bytes.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:25 +02:00
Bartlomiej Zolnierkiewicz
b5479167f4 ide: fix locking in drive_release_dev()
* Request queue cleanup should happen before freeing drive->id
  and marking device as non-present.  Fix it.

* Remove superfluous hwif->lock acquiring/releasing.

Cc: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:25 +02:00
Bartlomiej Zolnierkiewicz
4465461ece ide: merge ide_arm and ide_generic host drivers
There is no need for a separate ide_arm host driver nowadays
so merge it into ide_generic one.

While at it:
- return -EBUSY from ide_generic_init() if I/O resources are busy
- scale down ide_generic_check_pci_legacy_iobases() for CONFIG_PCI=n

Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Alexander Schulz <alex@shark-linux.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:24 +02:00
Bartlomiej Zolnierkiewicz
52913ab2c6 ide-generic: remove no longer needed sysfs interface
Nowadays we have "ide_generic.probe_mask=" module parameter
and ide_platform host driver so sysfs interface for adding
IDE interfaces is no longer needed.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:24 +02:00
Bartlomiej Zolnierkiewicz
f094d4d83b ide: sanitize ide_build_sglist() and ide_destroy_dmatable()
* Move ide_map_sg() calls out from ide_build_sglist()
  to ide_dma_prepare().

* Pass command to ide_destroy_dmatable().

* Rename ide_build_sglist() to ide_dma_map_sg()
  and ide_destroy_dmatable() to ide_dma_unmap_sg().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:24 +02:00
Bartlomiej Zolnierkiewicz
88b4132e10 ide: set/clear drive->waiting_for_dma flag in the core code
Set/clear drive->waiting_for_dma flag in the core code
instead of in ->dma_setup and ->dma_end methods.

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:22 +02:00
Bartlomiej Zolnierkiewicz
11998b3161 ide: move ide_map_sg() call out of ->dma_setup method (take 2)
Move ide_map_sg() call from ->dma_setup implementations and
ide_destroy_dmatable() one from *_build_dmatable() to ide_dma_prepare().

There should be no functional changes caused by this patch.

Sergei:
Removed 'use_pio_instead' labels and replaced 'goto' with 'return 0' --
that required no changes to the follow-up patches...

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:21 +02:00
Bartlomiej Zolnierkiewicz
8a4a5738ba ide: add ->dma_check method
* Add (an optional) ->dma_check method for checking if DMA can be
  used for a given command and fail DMA setup in ide_dma_prepare()
  if necessary.

* Convert alim15x3 and trm290 host drivers to use ->dma_check.

* Rename ali15x3_dma_setup() to ali_dma_check() while at it.

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:21 +02:00
Bartlomiej Zolnierkiewicz
7526efaafd trm290: use custom ->dma_{start,end} to handle trm290_prepare_drive()
Use custom ->dma_{start,end} methods to handle trm290_prepare_drive()
there instead of in ->dma_setup method.

There should be no functional changes caused by this patch
(DMA support is disabled currently in trm290.c).

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:21 +02:00
Bartlomiej Zolnierkiewicz
a6d67ffa7d ns87415: use custom ->dma_{start,end} to handle ns87415_prepare_drive()
Use custom ->dma_{start,end} methods to handle ns87415_prepare_drive()
there instead of in ->dma_setup method.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:20 +02:00
Bartlomiej Zolnierkiewicz
5ae5412d9a ide: add ide_dma_prepare() helper
* Add ide_dma_prepare() helper.

* Convert ide_issue_pc() and do_rw_taskfile() to use it.

* Make ide_build_sglist() static.

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:20 +02:00
Bartlomiej Zolnierkiewicz
4453011f95 ide: destroy DMA mappings after ending DMA (v2)
Move ide_destroy_dmatable() call out from ->dma_end method to
{ide_pc,cdrom_newpc,ide_dma}_intr(), ide_dma_timeout_retry()
and sgiioc4_resetproc().

This causes minor/safe behavior changes w.r.t.:
* cmd64x.c::cmd64{8,x}_dma_end()
* cs5536.c::cs5536_dma_end()
* icside.c::icside_dma_end()
* it821x.c::it821x_dma_end()
* scc_pata.c::__scc_dma_end()
* sl82c105.c::sl82c105_dma_end()
* tx4939ide.c::tx4939ide_dma_end()

v2:
* Fix build for CONFIG_BLK_DEV_IDEDMA=n (reported by Randy Dunlap).

Cc: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:20 +02:00
Bartlomiej Zolnierkiewicz
1cee52de28 ide: inline ide_dma_timeout() into ide_dma_timeout_retry()
Since ide_dma_timeout() is only used by ide_dma_timeout_retry()
inline it there.

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:19 +02:00
Bartlomiej Zolnierkiewicz
35c9b4daf4 ide: add ->dma_clear method and remove ->dma_timeout one
All custom ->dma_timeout implementations call the generic one thus it is
possible to have only an optional method for resetting DMA engine instead:

* Add ->dma_clear method and convert hpt366, pdc202xx_old and sl82c105
  host drivers to use it.

* Always use ide_dma_timeout() in ide_dma_timeout_retry() and remove
 ->dma_timeout method.

* Make ide_dma_timeout() static.

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:19 +02:00
Bartlomiej Zolnierkiewicz
e698ea83a8 ide-cd: minor ide_cdrom_setup() cleanup
Cache drive->queue in local variable and use max().

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:16 +02:00
Bartlomiej Zolnierkiewicz
14fa91ccba ide-cd: unify transfer padding in cdrom_newpc_intr()
* 'thislen' is always <= cmd->nleft for non-fs requests so the transfer
  padding inside the 'while (thislen > 0)' loop can happen only for fs
  requests -- then move it out of the loop and unify with the transfer
  padding for non-fs requests ('thislen' == 'len' for fs requests).

* blk_dump_rq_flags() dumps all request flags so it is enough to pass
  only the function name to it.

* Update my Copyrights while at it.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:16 +02:00
Bartlomiej Zolnierkiewicz
4a3d8cf48c ide-cd: use common completion path for DMA requests in cdrom_newpc_intr()
Use the following facts:

- rq->nr_sectors should now be always equal to (non-zero)
  rq->hard_nr_sectors for fs requests

- REQ_TYPE_ATA_PC requests have never bio attached to them

- rq->hard_nr_sectors == 0 for REQ_TYPE_ATA_PC requests

- DMA is used only for fs, pc and REQ_TYPE_ATA_PC requests

- 'uptodate' is ignored for pc requests ('rc == 0' case)

and use the common completion path also for DMA requests.

There should be no functional changes caused by this patch

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:15 +02:00
Bartlomiej Zolnierkiewicz
c7ec89994f ide-cd: use scatterlists for PIO transfers (non-fs requests) (v2)
Convert ide-cd to use scatterlists for PIO transfers and get rid of
partial completions (except on error) also for non-fs requests.

v2:
Do not map dataless commands to an sg since it oopses on the virt_to_page()
translation check when DEBUG_VIRTUAL is enabled.  (from Borislav Petkov,
reported/bisected-by Tetsuo Handa).

Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:15 +02:00
Bartlomiej Zolnierkiewicz
8652b31ab2 ide-cd: merge ide_cd_prepare_rw_request() into cdrom_start_rw()
There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:14 +02:00
Bartlomiej Zolnierkiewicz
06a449e301 ide-cd: fix non-SECTOR_SIZE-multiples PIO transfers for fs requests
We now support arbitrary number of bytes per-IRQ also for fs requests
so remove ide_cd_check_transfer_size() and IDE_AFLAG_LIMIT_NFRAMES.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:13 +02:00
Bartlomiej Zolnierkiewicz
a08915ba59 ide-cd: use scatterlists for PIO transfers (fs requests)
* Export ide_pio_bytes().

* Add ->last_xfer_len field to struct ide_cmd.

* Add ide_cd_error_cmd() helper to ide-cd.

* Convert ide-cd to use scatterlists also for PIO transfers (fs requests
  only for now) and get rid of partial completions (except when the error
  happens -- which is still subject to change later because looking at
  ATAPI spec it seems that the device is free to error the whole transfer
  with setting the Error bit only on the last transfer chunk).

* Update ide_cd_{prepare_rw,restore_request,do_request}() accordingly.

* Inline ide_cd_restore_request() into cdrom_start_rw().

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:13 +02:00
Bartlomiej Zolnierkiewicz
5ed57ad705 ide-cd: cleanup ide_cd_do_request()
There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:05 +02:00
Bartlomiej Zolnierkiewicz
c4c69e21b5 ide-cd: kill whole failed request in ide_cd_do_request()
Untangling cdrom_end_request() uncovered an error in completing
failed requests in ide_cd_do_request().  Fix it.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:04 +02:00
Bartlomiej Zolnierkiewicz
f63174e7a7 ide-cd: remove cdrom_end_request()
Inline cdrom_end_request() into cdrom_newpc_intr()
and ide_cd_do_request().

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:04 +02:00
Bartlomiej Zolnierkiewicz
8a11697485 ide-cd: unify cdrom_newpc_intr() exit paths
* Move cdrom_end_request() calls from cdrom_decode_status()
  and ide_cd_check_ireason() to cdrom_newpc_intr().

* Unify cdrom_newpc_intr() exit paths.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:03 +02:00
Bartlomiej Zolnierkiewicz
984c5e5974 ide-cd: move setting REQ_FAILED flag out from 'end_request' exit path
Move setting REQ_FAILED flag out from 'end_request' exit path in
cdrom_newpc_intr() and also rename 'end_request' to 'out_end'.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:03 +02:00
Bartlomiej Zolnierkiewicz
e0458ccb06 ide-cd: unify ide_cd_do_request() exit paths
* Move cdrom_end_request() calls from cdrom_start_rw()
  and ide_cd_prepare_rw_request() to ide_cd_do_request().

* Unify ide_cd_do_request() exit paths.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:02 +02:00
Bartlomiej Zolnierkiewicz
299c4852fc ide-cd: factor out failed request completion from cdrom_end_request()
There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:01 +02:00
Bartlomiej Zolnierkiewicz
6041e8fba8 ide-cd: remove no longer needed 'ignore' module parameter
ide-scsi is gone...

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:01 +02:00
Bartlomiej Zolnierkiewicz
1ab6d74516 ide-cd: remove needless ide_dump_status_no_sense() wrapper
It makes no sense to check for BSY bit being set as earlier OK_STAT()
check in cdrom_end_request() makes sure that BSY bit is cleared.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:00 +02:00
Bartlomiej Zolnierkiewicz
13eae6a48f ide-cd: remove dead code from cdrom_decode_status()
There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:00 +02:00
Bartlomiej Zolnierkiewicz
bf12a9c1c9 ide-cd: use ide_end_rq() also for failed non-fs requests
Use ide_end_rq() also for failed non-fs requests on completion
of REQUEST SENSE requests + use blk_rq_bytes() while at it.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:00 +02:00
Bartlomiej Zolnierkiewicz
116e690f4e ide-cd: remove dead URLs
Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:14:59 +02:00
Bartlomiej Zolnierkiewicz
f2bc316736 ide: use PageHighMem() instead of ifdefs in ide_pio_bytes()
Use PageHighMem() instead of ifdefs in ide_pio_bytes()
(=> local IRQs won't be disabled when not necessary).

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:14:59 +02:00
Bartlomiej Zolnierkiewicz
7a00798b1a ide: add support for arbitrary transfer lengths to ide_pio_bytes()
Add support for arbitrary transfer lengths to ide_pio_bytes()
and then inline ide_pio_multi() into ide_pio_datablock().

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:14:59 +02:00
Borislav Petkov
2eba082709 ide-atapi: start DMA after issuing a packet command
Apparently¹, some ATAPI devices want to see the packet command first
before enabling DMA otherwise they simply hang indefinitely. Reorder the
two steps and start DMA only after having issued the command first.

[1] http://marc.info/?l=linux-kernel&m=123835520317235&w=2

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Reported-by: Michael Roth <mroth@nessie.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:14:58 +02:00
Bartlomiej Zolnierkiewicz
da19620d99 at91_ide: fix ->ftf_flags handling
Fix some incorrect IDE_FTFLAG_* changes which slipped in commit
"ide: add "flagged" taskfile flags to struct ide_taskfile (v2)"
(commit 19710d25d5) few days ago.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:14:57 +02:00
Geert Uytterhoeven
479edf0655 ide: drivers/ide/ide-atapi.c needs <linux/scatterlist.h>
On m68k:
| drivers/ide/ide-atapi.c: In function 'ide_io_buffers':
| drivers/ide/ide-atapi.c:87: error: implicit declaration of function 'sg_page'
| drivers/ide/ide-atapi.c:87: warning: passing argument 1 of 'PageHighMem' makes pointer from integer without a cast
| drivers/ide/ide-atapi.c:91: warning: passing argument 1 of 'kmap_atomic' makes pointer from integer without a cast
| drivers/ide/ide-atapi.c:96: error: implicit declaration of function 'sg_virt'
| drivers/ide/ide-atapi.c:96: warning: assignment makes pointer from integer without a cast
| drivers/ide/ide-atapi.c:107: error: implicit declaration of function 'sg_next'
| drivers/ide/ide-atapi.c:107: warning: assignment makes pointer from integer without a cast

[bart: Dmitri Vorobiev submitted similar patch fixing MIPS]

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Dmitri Vorobiev <dmitri.vorobiev@movial.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:14:57 +02:00
Elias Oltmanns
9010941c54 ide: Fix code dealing with sleeping devices in do_ide_request()
Unfortunately, I missed a catch when reviewing the patch committed as
201bffa4. Here is the fix to the currently broken handling of sleeping
devices. In particular, this is required to get the disk shock
protection code working again.

Reported-by: Christian Thaeter <ct@pipapo.org>
Cc: stable@kernel.org
Signed-off-by: Elias Oltmanns <eo@nebensachen.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:14:56 +02:00
Bartlomiej Zolnierkiewicz
bf717c0a2e ide: keep track of number of bytes instead of sectors in struct ide_cmd
* Pass number of bytes instead of sectors to ide_init_sg_cmd().

* Pass number of bytes to process to ide_pio_sector() and rename
  it to ide_pio_bytes().

* Rename ->nsect field to ->nbytes in struct ide_cmd and use
  ->nbytes, ->nleft and ->cursg_ofs to keep track of number of
  bytes instead of sectors.

There should be no functional changes caused by this patch.

Acked-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27 12:46:47 +01:00