Rename rtl_debug.h to rtllib_debug.h. Source files should include
rtllib.h if they are generic and rtl_core.h if they are r8192e
specific. Files should never include both.
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The RTL_DEBUG enum is used for rt_global_debug_component global
variable and RT_TRACE. It should be in rtl_debug.h and not rtl_core.h.
The rtl8192_proc_* functions are r8192 specific and should not be in
rtl_debug.h. Move them to rtl_core.h.
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch cleans up rtl_debug.h by removing all the unused defines and
stub functions.
The changes to rtl_core.c are just to remove the deleted stub function
calls.
The changes to rtl_debug.c are functions that are never called.
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The lis3l02dq_read_event_config() function returned an ssize_t up to
now, which lead to a compiler warning in line 660 (initialization from
incompatible pointer type). The iio_info struct is defined to accept an
int-returning function as the read_event_config parameter.
Also it seems odd to have the check for (ret < 0) and return ret in
this case, when the return type is signed.
Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The loop used to reset the interrupt masks has faulty logic. There are 4
banks of 8 I/O, however each mask is comprised of 2 bits and thus there are
8 sets of registers to clear. Driver was wrongly equating this with 8 banks
leading to a us writing past the end of the "bank" array (used to store mask
configuration as these registers are write only) and thus causing memory
corruption. Clear both registers of masks for each bank and half iterations.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The function ad7280_store_balance_timer() parses data from a char*
buffer into a long variable, but uses the the function strict_strtoul
which expects a pointer to an unsigned long variable as its third
parameter.
As Dan Carpenter mentioned, the values are capped a few lines later,
but a check if val is negative is missing.
Now this function will return -ERANGE if there is a representation of
a negative number in buf.
Additionally the checkpatch.pl considers strict_strtoul as obsolete.
I replaced its call with the suggested kstrtoul.
Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The advantage of kcalloc is, that will prevent integer overflows which could
result from the multiplication of number of elements and size and it is also
a bit nicer to read.
The semantic patch that makes this change is available
in https://lkml.org/lkml/2011/11/25/107
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There are two potential integer overflows in private_ioctl() if
userspace passes in a large sList.uItem / sNodeList.uItem. The
subsequent call to kmalloc() would allocate a small buffer, leading
to a memory corruption.
Reported-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There are two potential integer overflows in private_ioctl() if
userspace passes in a large sList.uItem / sNodeList.uItem. The
subsequent call to kmalloc() would allocate a small buffer, leading
to a memory corruption.
Reported-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In all locations that call this function ignore your returna, so remove
it.
Signed-off-by: Marcos Paulo de Souza <marcos.mage@gmail.com>
Cc: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes a lot of commented code, and some return calls of
void functions.
Signed-off-by: Marcos Paulo de Souza <marcos.mage@gmail.com>
Cc: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remved some commented code, and fixed some style issues. was removed too
a redundant if statement.
Signed-off-by: Marcos Paulo de Souza <marcos.mage@gmail.com>
Cc: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed return call of void functions. Removed some code style issues.
Signed-off-by: Marcos Paulo de Souza <marcos.mage@gmail.com>
Cc: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Marcos Paulo de Souza <marcos.mage@gmail.com>
Cc: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed the function iwctl_giwnwid, that just return a error code.
Changes v1 to v2:
Removed same functions of vt6655 and vt6656.
Signed-off-by: Marcos Paulo de Souza <marcos.mage@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
hv_netvsc has been reviewed on netdev mailing list on 6/09/2011.
All recommended changes have been made. We are requesting to move
it out of staging area.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: KY Srinivasan <kys@microsoft.com>
Signed-off-by: Mike Sterling <Mike.Sterling@microsoft.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The code in sca3000_store_measurement_mode() uses the variable val to
do bitwise operations with an int mask and or-s it into st->rx[0] which
is an entry in a u8 array (see sca3000.h).
This means up to now values larger than a u8 were silently ignored and
just the lower 8 bits counted into the value that was written into
st->rx[0]. This code will return -ERANGE if the value in buf was too
large to fit into a u8.
Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In lis3102dq_write_frequency() we used a long variable to store the
value parsed from the char* buffer buf, as there only was a
strict_strtol() function to parse values.
Now we have got kstrto* which allows us to convert to the right data
type in most cases.
In this particular function we want to write a frequency value, and it
doesn't make sense to allow negative values here (as Dan Carpenter
pointed out in a previous email).
This means we can now parse the value into an unsigned long and get an
error for invalid (e.g. negative) values.
Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In the adis16220_write_16bit() function we used a long value to store
parsed data from the char* buffer buf.
The called function to actually write the data,
adis16220_spi_write_reg_16(), takes a u16 value as a parameter, so up
to now a value larger than u16 was silently ignored as it was only
truncated when passing the parameter.
Now this function will only accept values fitting into a u16.
Additionally the parsing function was changed to overcome the now
obsolete strict_strtol() function.
Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch reorders the semaphore locking.
It makes better sense to first evaluate
fw_download_sema semaphore then
NVMRdmWrmLocl semaphore. The
fw_download_sema is suppose to be
acquired in the START ioctl. If this is
not true, then it does not make sense
to continue.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a cleanup patch. I've shuffled the code around to
move the error handling closer to the calls. I've removed
some indent levels. I've replaced break statements with
direct returns.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch evaluates/calls the down_trylock locking
function directly, instead of storing the results
in a variable and evaluating the variable. These
changes were made in:
IOCTL_BCM_BUFFER_DOWNLOAD_STOP and
IOCTL_BCM_BUFFER_DOWNLOAD_START.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Implement the LTTng probe callbacks. One notable file here is
lttng-events.h, which is the core implementation of the LTTng
TRACE_EVENT macros for generation of probes and tracepoint decription
from the TRACE_EVENT declarations.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add the "lttng" virtual file to debugfs and procfs. All operations are
performed through ioctls (LTTng ioctl range is already reserved
upstream) on this virtual file and on anonymous file descriptors
returned by these ioctls. Each file descriptor is associated with a
tracer "object" (session, channel, stream, event, context).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This calibration feature is fairly limited for now, but provides an
example of how this can be performed.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Events can be augmented with context information. This is dynamically
configurable from the command line.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
x86-32 and x86-64 system call instrumentation, along with the
lttng-syscalls-generate-headers.sh script that generates the headers
from the system call list. See README for details.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Modifications to the in-kernel TRACE_EVENT are needed to generate the
compact event descriptions and the probe code LTTng generates. These
changes could apply to upstream TRACE_EVENT, but requires changing the
in-kernel API.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Implement wrappers for compatibility with older kernel versions and
kernels with had the libringbuffer (old) patchset applied.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
1. No need to check if a list is empty before list_for_each_ looping as
this is already checked by loop stopping conditional.
The side effect is reduced indentation depth
from:
if (!list_empty)
list_for_each()
to:
list_for_each()
2. drop cb_ prefix from cl_pos, cl_next variables used in list_for_each
loops. The code is more compact and readable
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We can remove BUG_ON in mei_irq_thread_read_client_message()
as the testing for response buffer size overflow has already
graceful handling in place.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Eliminate unnecessary nesting levels by rearranging code and conditions.
The resulting code should be still identical.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Eliminate unnecessary nesting levels by rearranging code and conditions.
The resulting code should be still identical.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
