Commit graph

443 commits

Author SHA1 Message Date
Hans-Christian Egtvedt
30754acf29 avr32: use GPIO line PB15 on EVKLCD10x boards for backlight
The PB15 GPIO line is used to control the enable and disable signal for
the backlight regulator on EVKLCD10x boards. This patch hands the I/O
line over to the LCDC driver, which will control when to enable and
disable the backlight.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
[haavard.skinnemoen@atmel.com: reverted ac97c change]
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-03-26 14:58:28 +01:00
Hans-Christian Egtvedt
fe272b5bd1 avr32: configure MCI detect and write protect pins for EVKLCD10x boards
This patch removes the special handling of MCI platform data for
EVKLCD10x boards. This is now possible since the pin mask for the LCD
controller is no longer reserving the I/O lines used for MCI card
detection and write protect.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-03-26 14:49:40 +01:00
Hans-Christian Egtvedt
ecb1bd894e avr32: set pin mask to alternative 18 bpp for EVKLCD10x boards
This patch will set the pin mask to alternative 18 bits per pixel output
for EVKLCD10x boards.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-03-26 14:49:39 +01:00
Hans-Christian Egtvedt
2ae6d5d8f0 avr32: add pin mask for 18-bit color on the LCD controller
This patch adds two defines for setting a pin mask for 18-bit LCD panels
connected to the LCD controller. One mask for primary output and one
mask for alternative output.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-03-26 14:49:39 +01:00
Hans-Christian Egtvedt
ef41902190 avr32: fix 15-bit LCDC pin mask to use MSB lines
This patch corrects the 15-bit LCDC pin mask definitions to select the
five upper lines in each color byte from the LCDC data output. When
reducing the color depth the LCDC will start filling MSB and downwards.

Also only enable 5 bits per color as the define indicates.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-03-26 14:49:39 +01:00
Huang Weiyi
5201b0a47b avr32: remove duplicated #include
Remove duplicated #include in arch/avr32/boards/hammerhead/flash.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Acked-by: Alex Raimondi <mailinglist@miromico.ch>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-03-24 09:16:51 +01:00
Ingo Molnar
edb35028e4 Merge branches 'irq/genirq' and 'linus' into irq/core 2009-03-16 09:20:13 +01:00
Ingo Molnar
f0ef039851 Merge branch 'x86/core' into tracing/textedit
Conflicts:
	arch/x86/Kconfig
	block/blktrace.c
	kernel/irq/handle.c

Semantic conflict:
	kernel/trace/blktrace.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-06 16:45:01 +01:00
Uwe Kleine-Koenig
c79a61f557 tracing: make CALLER_ADDRx overwriteable
The current definition of CALLER_ADDRx isn't suitable for all platforms.
E.g. for ARM __builtin_return_address(N) doesn't work for N > 0 and
AFAIK for powerpc there are no frame pointers needed to have a working
__builtin_return_address.  This patch allows defining the CALLER_ADDRx
macros in <asm/ftrace.h> and let these take precedence.

Because now <asm/ftrace.h> is included unconditionally in
<linux/ftrace.h> all archs that don't already had this include get an
empty one for free.

Signed-off-by: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-02 16:49:37 -05:00
Ingo Molnar
0edcf8d692 Merge branch 'tj-percpu' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc into core/percpu
Conflicts:
	arch/x86/include/asm/pgtable.h
2009-02-24 21:52:45 +01:00
David S. Miller
e70049b9e7 Merge branch 'master' of /home/davem/src/GIT/linux-2.6/ 2009-02-24 03:50:29 -08:00
Tejun Heo
c132937556 bootmem: clean up arch-specific bootmem wrapping
Impact: cleaner and consistent bootmem wrapping

By setting CONFIG_HAVE_ARCH_BOOTMEM_NODE, archs can define
arch-specific wrappers for bootmem allocation.  However, this is done
a bit strangely in that only the high level convenience macros can be
changed while lower level, but still exported, interface functions
can't be wrapped.  This not only is messy but also leads to strange
situation where alloc_bootmem() does what the arch wants it to do but
the equivalent __alloc_bootmem() call doesn't although they should be
able to be used interchangeably.

This patch updates bootmem such that archs can override / wrap the
backend function - alloc_bootmem_core() instead of the highlevel
interface functions to allow simpler and consistent wrapping.  Also,
HAVE_ARCH_BOOTMEM_NODE is renamed to HAVE_ARCH_BOOTMEM.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@saeurebad.de>
2009-02-24 11:57:20 +09:00
Ingo Molnar
fc6fc7f1b1 Merge branch 'linus' into x86/apic
Conflicts:
	arch/x86/mach-default/setup.c

Semantic conflict resolution:
	arch/x86/kernel/setup.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-22 20:05:19 +01:00
Ingo Molnar
64b36ca7f4 Merge branches 'tracing/function-graph-tracer' and 'linus' into tracing/core 2009-02-20 11:35:57 +01:00
Gregory CLEMENT
744f659272 [ARM] 5400/1: Add support for inverted rdy_busy pin for Atmel nand device controller
Add support for inverted rdy_busy pin for Atmel nand device controller
It will fix building error on NeoCore926 board.

Acked-by: Andrew Victor <linux@maxim.org.za>
Acked-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gregory CLEMENT <gclement@adeneo.adetelgroup.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-16 21:40:39 +00:00
Patrick Ohly
cb9eff0978 net: new user space API for time stamping of incoming and outgoing packets
User space can request hardware and/or software time stamping.
Reporting of the result(s) via a new control message is enabled
separately for each field in the message because some of the
fields may require additional computation and thus cause overhead.
User space can tell the different kinds of time stamps apart
and choose what suits its needs.

When a TX timestamp operation is requested, the TX skb will be cloned
and the clone will be time stamped (in hardware or software) and added
to the socket error queue of the skb, if the skb has a socket
associated with it.

The actual TX timestamp will reach userspace as a RX timestamp on the
cloned packet. If timestamping is requested and no timestamping is
done in the device driver (potentially this may use hardware
timestamping), it will be done in software after the device's
start_hard_xmit routine.

Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 22:43:33 -08:00
Ingo Molnar
8f8573ae9f Merge branches 'irq/genirq', 'irq/sparseirq' and 'irq/urgent' into irq/core 2009-02-13 11:57:18 +01:00
Steven Rostedt
5a5fb7dbe8 preempt-count: force hardirq-count to max of 10
To add a bit in the preempt_count to be set when in NMI context, we
found that some archs did not have enough bits to spare. This is
due to the hardirq_count being a mask that can hold NR_IRQS.

Some archs allow for over 16000 IRQs, and that would require a mask
of 14 bits. The sofitrq mask is 8 bits and the preempt disable mask
is also 8 bits.  The PREEMP_ACTIVE bit is bit 30, and bit 31 would
make the preempt_count (which is type int) a negative number.
A negative preempt_count is a sign of failure.

Add them up 14+8+8+1+1 you get 32 bits. No room for the NMI bit.

But the hardirq_count is to track the number of nested IRQs, not
the number of total IRQs.  This originally took the paranoid approach
of setting the max nesting to NR_IRQS. But when we have archs with
over 1000 IRQs, it is not practical to think they will ever all
nest on a single CPU. Not to mention that this would most definitely
cause a stack overflow.

This patch sets a max of 10 bits to be used for IRQ nesting.
I did a 'git grep HARDIRQ' to examine all users of HARDIRQ_BITS and
HARDIRQ_MASK, and found that making it a max of 10 would not hurt
anyone. I did find that the m68k expected it to be 8 bits, so
I allow for the archs to set the number to be less than 10.

I removed the setting of HARDIRQ_BITS from the archs that set it
to more than 10. This includes ALPHA, ia64 and avr32.

This will always allow room for the NMI bit, and if we need to allow
for NMI nesting, we have 4 bits to play with.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-12 11:19:05 -05:00
Jaswinder Singh Rajput
1c6ce704f1 headers_check fix: avr32, swab.h
fix the following 'make headers_check' warnings:

  usr/include/asm-avr32/swab.h:7: include of <linux/types.h> is preferred over <asm/types.h>
  usr/include/asm-avr32/swab.h:22: found __[us]{8,16,32,64} type without #include <linux/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-02-01 11:01:23 +05:30
Jean Delvare
dd7f8dbe2b eeprom: More consistent symbol names
Now that all EEPROM drivers live in the same place, let's harmonize
their symbol names.

Also fix eeprom's dependencies, it definitely needs sysfs, and is no
longer experimental after many years in the kernel tree.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
2009-01-26 21:19:57 +01:00
Haavard Skinnemoen
61f3632fdc avr32: fix out-of-range rjmp instruction on large kernels
Use .subsection to place fixups closer to their jump targets. This
increases the maximum size of the kernel before we get link errors
significantly.

The problem here is that we don't have a "call"-ish pseudo-instruction
to use instead of rjmp...we could add one, but that means we'll have to
wait for a new toolchain release, wait until we're fairly sure most
people are using it, etc...

As an added bonus, it should decrease the RAM footprint slightly,
though it might pollute the icache a bit more.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-01-16 09:38:05 +01:00
Ben Nizette
8d29b7b9f8 avr32: Fix out-of-range rcalls in large kernels
Replace handcoded rcall instructions with the call pseudo-instruction.
For kernels too far over 1MB the rcall instruction can't reach and
linking will fail.  We already call the final linker with --relax which
converts call pseudo-instructions to the right things anyway.

This fixes

arch/avr32/kernel/built-in.o: In function `syscall_exit_work':
(.ex.text+0x198): relocation truncated to fit: R_AVR32_22H_PCREL against symbol `schedule' defined in .sched.text section in kernel/built-in.o
arch/avr32/kernel/built-in.o: In function `fault_exit_work':
(.ex.text+0x3b6): relocation truncated to fit: R_AVR32_22H_PCREL against symbol `schedule' defined in .sched.text section in kernel/built-in.o

But I'm still left with

arch/avr32/kernel/built-in.o:(.fixup+0x2): relocation truncated to fit: R_AVR32_22H_PCREL against `.text'+45a
arch/avr32/kernel/built-in.o:(.fixup+0x8): relocation truncated to fit: R_AVR32_22H_PCREL against `.text'+8ea
arch/avr32/kernel/built-in.o:(.fixup+0xe): relocation truncated to fit: R_AVR32_22H_PCREL against `.text'+abe
arch/avr32/kernel/built-in.o:(.fixup+0x14): relocation truncated to fit: R_AVR32_22H_PCREL against `.text'+ac8
arch/avr32/kernel/built-in.o:(.fixup+0x1a): relocation truncated to fit: R_AVR32_22H_PCREL against `.text'+ad2
arch/avr32/kernel/built-in.o:(.fixup+0x20): relocation truncated to fit: R_AVR32_22H_PCREL against `.text'+adc
arch/avr32/kernel/built-in.o:(.fixup+0x26): relocation truncated to fit: R_AVR32_22H_PCREL against `.text'+ae6
arch/avr32/kernel/built-in.o:(.fixup+0x2c): relocation truncated to fit: R_AVR32_22H_PCREL against `.text'+af0
arch/avr32/kernel/built-in.o:(.fixup+0x32): additional relocation overflows omitted from the output

These are caused by a similar problem with 'rjmp' instructions.
Unfortunately, there's no easy fix for these at the moment since we
don't have a arbitrary-range 'jmp' instruction similar to 'call'.

Signed-off-by: Ben Nizette <bn@niasdigital.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-01-16 09:31:57 +01:00
Harvey Harrison
74d96f0186 byteorder: make swab.h include asm/swab.h like a regular header
Add swab.h to kbuild.asm and remove the individual entries from
each arch, mark as unifdef as some arches have some kernel-only
bits inside.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-14 19:56:50 -08:00
Yinghai Lu
0b0f0b1c2c sparseirq: use kstat_irqs_cpu on non-x86 architectures too
so we could move kstat_irqs array to irq_desc struct.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-12 20:01:12 +01:00
Linus Torvalds
d9e8a3a5b8 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (22 commits)
  ioat: fix self test for multi-channel case
  dmaengine: bump initcall level to arch_initcall
  dmaengine: advertise all channels on a device to dma_filter_fn
  dmaengine: use idr for registering dma device numbers
  dmaengine: add a release for dma class devices and dependent infrastructure
  ioat: do not perform removal actions at shutdown
  iop-adma: enable module removal
  iop-adma: kill debug BUG_ON
  iop-adma: let devm do its job, don't duplicate free
  dmaengine: kill enum dma_state_client
  dmaengine: remove 'bigref' infrastructure
  dmaengine: kill struct dma_client and supporting infrastructure
  dmaengine: replace dma_async_client_register with dmaengine_get
  atmel-mci: convert to dma_request_channel and down-level dma_slave
  dmatest: convert to dma_request_channel
  dmaengine: introduce dma_request_channel and private channels
  net_dma: convert to dma_find_channel
  dmaengine: provide a common 'issue_pending_all' implementation
  dmaengine: centralize channel allocation, introduce dma_find_channel
  dmaengine: up-level reference counting to the module level
  ...
2009-01-09 11:52:14 -08:00
Haavard Skinnemoen
183b3af66e avr32: Move syscalls.h under arch/avr32/include/asm/
This file was added to the old include/asm-avr32/ directory by mistake.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-01-07 11:28:15 +01:00
Haavard Skinnemoen
52435bfc66 Merge branches 'fixes', 'cleanups' and 'boards' 2009-01-07 11:05:42 +01:00
Haavard Skinnemoen
d305d8d349 avr32: Define DIE_OOPS
Whatever the hell that is. Needed to make kernel/trace/trace.c compile
again.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-01-07 10:40:30 +01:00
Harvey Harrison
292b4d0978 avr32: introduce asm/swab.h
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 18:10:26 -08:00
Linus Torvalds
40d7ee5d16 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (60 commits)
  uio: make uio_info's name and version const
  UIO: Documentation for UIO ioport info handling
  UIO: Pass information about ioports to userspace (V2)
  UIO: uio_pdrv_genirq: allow custom irq_flags
  UIO: use pci_ioremap_bar() in drivers/uio
  arm: struct device - replace bus_id with dev_name(), dev_set_name()
  libata: struct device - replace bus_id with dev_name(), dev_set_name()
  avr: struct device - replace bus_id with dev_name(), dev_set_name()
  block: struct device - replace bus_id with dev_name(), dev_set_name()
  chris: struct device - replace bus_id with dev_name(), dev_set_name()
  dmi: struct device - replace bus_id with dev_name(), dev_set_name()
  gadget: struct device - replace bus_id with dev_name(), dev_set_name()
  gpio: struct device - replace bus_id with dev_name(), dev_set_name()
  gpu: struct device - replace bus_id with dev_name(), dev_set_name()
  hwmon: struct device - replace bus_id with dev_name(), dev_set_name()
  i2o: struct device - replace bus_id with dev_name(), dev_set_name()
  IA64: struct device - replace bus_id with dev_name(), dev_set_name()
  i7300_idle: struct device - replace bus_id with dev_name(), dev_set_name()
  infiniband: struct device - replace bus_id with dev_name(), dev_set_name()
  ISDN: struct device - replace bus_id with dev_name(), dev_set_name()
  ...
2009-01-06 17:02:07 -08:00
Russell King
ba84be2338 remove linux/hardirq.h from asm-generic/local.h
While looking at reducing the amount of architecture namespace pollution
in the generic kernel, I found that asm/irq.h is included in the vast
majority of compilations on ARM (around 650 files.)

Since asm/irq.h includes a sub-architecture include file on ARM, this
causes a negative impact on the ccache's ability to re-use the build
results from other sub-architectures, so we have a desire to reduce the
dependencies on asm/irq.h.

It turns out that a major cause of this is the needless include of
linux/hardirq.h into asm-generic/local.h.  The patch below removes this
include, resulting in some 250 to 300 files (around half) of the kernel
then omitting asm/irq.h.

My test builds still succeed, provided two ARM files are fixed
(arch/arm/kernel/traps.c and arch/arm/mm/fault.c) - so there may be
negative impacts for this on other architectures.

Note that x86 does not include asm/irq.h nor linux/hardirq.h in its
asm/local.h, so this patch can be viewed as bringing the generic version
into line with the x86 version.

[kosaki.motohiro@jp.fujitsu.com: add #include <linux/irqflags.h> to acpi/processor_idle.c]
[adobriyan@gmail.com: fix sparc64]
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:13 -08:00
Matthew Wilcox
ea43546750 atomic_t: unify all arch definitions
The atomic_t type cannot currently be used in some header files because it
would create an include loop with asm/atomic.h.  Move the type definition
to linux/types.h to break the loop.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:10 -08:00
Kay Sievers
169539c872 avr: struct device - replace bus_id with dev_name(), dev_set_name()
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-06 10:44:43 -08:00
Dan Williams
74465b4ff9 atmel-mci: convert to dma_request_channel and down-level dma_slave
dma_request_channel provides an exclusive channel, so we no longer need to
pass slave data through dmaengine.

Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-06 11:38:16 -07:00
Ben Nizette
30f8825c50 avr32: Remove DMATEST from defconfigs
In the defconfigs for ATNGW100 and ATSTK100[236] the DMA Test driver is
compiled as a module.  This means systems built with *_defconfig +
CONFIG_MODULES=n are unusable as the 3 dma test channels monopolise the
CPU.

I 'spose Haavard uses this module a lot but IMO it isn't really
something needed on all eval boards by default.

Signed-off-by: Ben Nizette <bn@niasdigital.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-01-06 14:42:33 +01:00
Julia Lawall
e24500193b arch/avr32: Eliminate NULL test and memset after alloc_bootmem
As noted by Akinobu Mita in patch b1fceac2b9,
alloc_bootmem and related functions never return NULL and always return a
zeroed region of memory.  Thus a NULL test or memset after calls to these
functions is unnecessary.

This was fixed using the following semantic patch.
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
expression E;
statement S;
@@

E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\|alloc_bootmem_node\|alloc_bootmem_low_pages_node\|alloc_bootmem_pages_node\)(...)
... when != E
(
- BUG_ON (E == NULL);
|
- if (E == NULL) S
)

@@
expression E,E1;
@@

E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\|alloc_bootmem_node\|alloc_bootmem_low_pages_node\|alloc_bootmem_pages_node\)(...)
... when != E
- memset(E,0,E1);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-01-06 12:39:25 +01:00
Haavard Skinnemoen
4209324a74 avr32: data param to at32_add_device_mci() must be non-NULL
at32_add_device_mci() will refuse to add the mci device if the data
parameter is NULL. Fix up the favr-32 and hammerhead boards so that this
doesn't happen.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: Alex Raimondi <mailinglist@miromico.ch>
Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2009-01-05 17:14:22 +01:00
Haavard Skinnemoen
0e49005090 Merge branch 'move-atmel-mci-h' into boards 2009-01-05 16:36:07 +01:00
Nicolas Ferre
c42aa775cc atmel-mci: move atmel-mci.h file to include/linux
Needed to use the atmel-mci driver in an architecture
independant maner.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-01-05 16:35:31 +01:00
Alex Raimondi
dd5e1339e5 avr32: Hammerhead board support
The Hammerhead platform is built around a AVR32 32-bit microcontroller
from Atmel.  It offers versatile peripherals, such as ethernet, usb
device, usb host etc.

The board also incooperates a power supply and is a Power over Ethernet
(PoE) Powered Device (PD).

Additonally, a Cyclone III FPGA from Altera is integrated on the board.
The FPGA is mapped into the 32-bit AVR memory bus. The FPGA offers two
DDR2 SDRAM interfaces, which will cover even the most exceptional need
of memory bandwidth. Together with the onboard video decoder the board
is ready for video processing.

This patch does include the basic support for the fpga device driver,
but not the device driver itself.

Signed-off-by: Alex Raimondi <mailinglist@miromico.ch>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-01-05 15:52:04 +01:00
Haavard Skinnemoen
bc08969fe6 Merge branch 'cleanups' into boards 2009-01-05 15:51:52 +01:00
Alex Raimondi
adde42b583 avr32: Allow reserving multiple pins at once
at32_reserve_pin now takes an u32 bitmask rather than a single pin.
This allows to reserve multiple pins at once.

Remove (undocumented) SDCS (pin PE26) from reservation in board
setup code.

Signed-off-by: Alex Raimondi <raimondi@miromico.ch>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-01-05 12:16:13 +01:00
Haavard Skinnemoen
45f926912f favr-32: Remove deprecated call
at32_add_system_devices() is deprecated, so remove the call to it.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-01-05 12:15:14 +01:00
Mark Jackson
8d3d3fb922 MIMC200: Remove deprecated call
This patch removes a call to the deprecated function
at32_add_system_devices().

Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-01-05 11:35:16 +01:00
Kay Sievers
5f6333bd6e avr: struct device - replace bus_id with dev_name(), dev_set_name()
(I did not compile or test it, please let me know, or help fixing
 it, if something is wrong with the conversion)

This patch is part of a larger patch series which will remove
the "char bus_id[20]" name string from struct device. The device
name is managed in the kobject anyway, and without any size
limitation, and just needlessly copied into "struct device".

To set and read the device name dev_name(dev) and dev_set_name(dev)
must be used. If your code uses static kobjects, which it shouldn't
do, "const char *init_name" can be used to statically provide the
name the registered device should have. At registration time, the
init_name field is cleared, to enforce the use of dev_name(dev) to
access the device name at a later time.

We need to get rid of all occurrences of bus_id in the entire tree
to be able to enable the new interface. Please apply this patch,
and possibly convert any remaining remaining occurrences of bus_id.

We want to submit a patch to -next, which will remove bus_id from
"struct device", to find the remaining pieces to convert, and finally
switch over to the new api, which will remove the 20 bytes array
and does no longer have a size limitation.

Thanks,
Kay

From: Kay Sievers <kay.sievers@vrfy.org>
Subject: avr: struct device - replace bus_id with dev_name(), dev_set_name()

Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-01-05 10:29:35 +01:00
Linus Torvalds
7d3b56ba37 Merge branch 'cpus4096-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'cpus4096-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (77 commits)
  x86: setup_per_cpu_areas() cleanup
  cpumask: fix compile error when CONFIG_NR_CPUS is not defined
  cpumask: use alloc_cpumask_var_node where appropriate
  cpumask: convert shared_cpu_map in acpi_processor* structs to cpumask_var_t
  x86: use cpumask_var_t in acpi/boot.c
  x86: cleanup some remaining usages of NR_CPUS where s/b nr_cpu_ids
  sched: put back some stack hog changes that were undone in kernel/sched.c
  x86: enable cpus display of kernel_max and offlined cpus
  ia64: cpumask fix for is_affinity_mask_valid()
  cpumask: convert RCU implementations, fix
  xtensa: define __fls
  mn10300: define __fls
  m32r: define __fls
  h8300: define __fls
  frv: define __fls
  cris: define __fls
  cpumask: CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS
  cpumask: zero extra bits in alloc_cpumask_var_node
  cpumask: replace for_each_cpu_mask_nr with for_each_cpu in kernel/time/
  cpumask: convert mm/
  ...
2009-01-03 12:04:39 -08:00
Linus Torvalds
b840d79631 Merge branch 'cpus4096-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'cpus4096-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (66 commits)
  x86: export vector_used_by_percpu_irq
  x86: use logical apicid in x2apic_cluster's x2apic_cpu_mask_to_apicid_and()
  sched: nominate preferred wakeup cpu, fix
  x86: fix lguest used_vectors breakage, -v2
  x86: fix warning in arch/x86/kernel/io_apic.c
  sched: fix warning in kernel/sched.c
  sched: move test_sd_parent() to an SMP section of sched.h
  sched: add SD_BALANCE_NEWIDLE at MC and CPU level for sched_mc>0
  sched: activate active load balancing in new idle cpus
  sched: bias task wakeups to preferred semi-idle packages
  sched: nominate preferred wakeup cpu
  sched: favour lower logical cpu number for sched_mc balance
  sched: framework for sched_mc/smt_power_savings=N
  sched: convert BALANCE_FOR_xx_POWER to inline functions
  x86: use possible_cpus=NUM to extend the possible cpus allowed
  x86: fix cpu_mask_to_apicid_and to include cpu_online_mask
  x86: update io_apic.c to the new cpumask code
  x86: Introduce topology_core_cpumask()/topology_thread_cpumask()
  x86: xen: use smp_call_function_many()
  x86: use work_on_cpu in x86/kernel/cpu/mcheck/mce_amd_64.c
  ...

Fixed up trivial conflict in kernel/time/tick-sched.c manually
2009-01-02 11:44:09 -08:00
Rusty Russell
96b8d4c19d avr32: define __fls
Like fls, but can't be handed 0 and returns the bit number.

(I broke this arch in linux-next by using __fls in generic code).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-01-01 10:12:16 +10:30
Al Viro
18d8fda7c3 take init_fs to saner place
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-12-31 18:07:42 -05:00
Rusty Russell
33edcf133b Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2008-12-30 08:02:35 +10:30
Haavard Skinnemoen
8983fdb508 avr32: favr-32 build fix
The favr-32 board code still refers to the old asm/arch header files
which were moved to mach/ some time ago.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-12-18 16:22:13 +01:00
Haavard Skinnemoen
de13d28e0c ATSTK1006: Fix boot from NAND flash
Enable JFFS2 write buffer support so that the kernel can access a root
filesystem in NAND flash.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-12-18 16:13:24 +01:00
Jaswinder Singh
c80ce2d52b avr32: Introducing asm/syscalls.h
Declaring arch-dependent syscalls for avr32 architecture

Signed-off-by: Jaswinder Singh <jaswinder@infradead.org>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-12-17 13:32:38 +01:00
Hans-Christian Egtvedt
c1892cb8d2 avr32: remove .note.gnu.build-id section when making vmlinux.bin
This patch will remove the section .note.gnu.build-id added in binutils
2.18 from the vmlinux.bin binary. Not removing this section results in a
huge multiple gigabyte binary and likewize large uImage.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-12-17 11:44:10 +01:00
Rusty Russell
320ab2b0b1 cpumask: convert struct clock_event_device to cpumask pointers.
Impact: change calling convention of existing clock_event APIs

struct clock_event_timer's cpumask field gets changed to take pointer,
as does the ->broadcast function.

Another single-patch change.  For safety, we BUG_ON() in
clockevents_register_device() if it's not set.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
2008-12-13 21:20:26 +10:30
Anders Blomdell
105462632c avr32: Enable pullup on USART TX lines
Make USART initialization conform to Section 24.6.1 in the AT32AP7000 manual,
i.e. "To prevent the TXD line from falling when the USART is disabled, the use
of an internal pull up is mandatory."

Signed-off-by: Anders Blomdell <anders.blomdell@control.lth.se>
[haavard.skinnemoen@atmel.com: enable pullup on RX as well]
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-24 15:45:48 +02:00
Haavard Skinnemoen
d9214556b1 Merge branches 'boards' and 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6 2008-10-23 15:24:10 +02:00
Haavard Skinnemoen
e82c6106b0 avr32: Fix GPIO initcall breakage
Add essential system devices, including GPIO controllers, automatically
at core_initcall time. This ensures that the devices are there when the
PIO driver gets initialized at postcore_initcall, fixing a bug exposed
by commit d6634db8fe "avr32: Use
platform_driver_probe for pio platform driver".

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-23 15:18:33 +02:00
Haavard Skinnemoen
e3f91ca481 avr32: Scale loops_per_jiffy when cpu frequency changes
The loops_per_jiffy variable isn't updated when cpufreq changes the CPU
frequency. This could cause udelay() and friends to produce wrong
delays.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-23 15:18:33 +02:00
Alex Raimondi
6090065663 avr32: Fix bug in LCD pin setup on port C
Bug was introduced with the new at32_select_periph function.

Signed-off-by: Alex Raimondi <mailinglist@miromico.ch>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-23 15:18:22 +02:00
Linus Torvalds
9301975ec2 Merge branch 'genirq-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
This merges branches irq/genirq, irq/sparseirq-v4, timers/hpet-percpu
and x86/uv.

The sparseirq branch is just preliminary groundwork: no sparse IRQs are
actually implemented by this tree anymore - just the new APIs are added
while keeping the old way intact as well (the new APIs map 1:1 to
irq_desc[]).  The 'real' sparse IRQ support will then be a relatively
small patch ontop of this - with a v2.6.29 merge target.

* 'genirq-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (178 commits)
  genirq: improve include files
  intr_remapping: fix typo
  io_apic: make irq_mis_count available on 64-bit too
  genirq: fix name space collisions of nr_irqs in arch/*
  genirq: fix name space collision of nr_irqs in autoprobe.c
  genirq: use iterators for irq_desc loops
  proc: fixup irq iterator
  genirq: add reverse iterator for irq_desc
  x86: move ack_bad_irq() to irq.c
  x86: unify show_interrupts() and proc helpers
  x86: cleanup show_interrupts
  genirq: cleanup the sparseirq modifications
  genirq: remove artifacts from sparseirq removal
  genirq: revert dynarray
  genirq: remove irq_to_desc_alloc
  genirq: remove sparse irq code
  genirq: use inline function for irq_to_desc
  genirq: consolidate nr_irqs and for_each_irq_desc()
  x86: remove sparse irq from Kconfig
  genirq: define nr_irqs for architectures with GENERIC_HARDIRQS=n
  ...
2008-10-20 13:23:01 -07:00
Matt Helsley
dc52ddc0e6 container freezer: implement freezer cgroup subsystem
This patch implements a new freezer subsystem in the control groups
framework.  It provides a way to stop and resume execution of all tasks in
a cgroup by writing in the cgroup filesystem.

The freezer subsystem in the container filesystem defines a file named
freezer.state.  Writing "FROZEN" to the state file will freeze all tasks
in the cgroup.  Subsequently writing "RUNNING" will unfreeze the tasks in
the cgroup.  Reading will return the current state.

* Examples of usage :

   # mkdir /containers/freezer
   # mount -t cgroup -ofreezer freezer  /containers
   # mkdir /containers/0
   # echo $some_pid > /containers/0/tasks

to get status of the freezer subsystem :

   # cat /containers/0/freezer.state
   RUNNING

to freeze all tasks in the container :

   # echo FROZEN > /containers/0/freezer.state
   # cat /containers/0/freezer.state
   FREEZING
   # cat /containers/0/freezer.state
   FROZEN

to unfreeze all tasks in the container :

   # echo RUNNING > /containers/0/freezer.state
   # cat /containers/0/freezer.state
   RUNNING

This is the basic mechanism which should do the right thing for user space
task in a simple scenario.

It's important to note that freezing can be incomplete.  In that case we
return EBUSY.  This means that some tasks in the cgroup are busy doing
something that prevents us from completely freezing the cgroup at this
time.  After EBUSY, the cgroup will remain partially frozen -- reflected
by freezer.state reporting "FREEZING" when read.  The state will remain
"FREEZING" until one of these things happens:

	1) Userspace cancels the freezing operation by writing "RUNNING" to
		the freezer.state file
	2) Userspace retries the freezing operation by writing "FROZEN" to
		the freezer.state file (writing "FREEZING" is not legal
		and returns EIO)
	3) The tasks that blocked the cgroup from entering the "FROZEN"
		state disappear from the cgroup's set of tasks.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: export thaw_process]
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Signed-off-by: Matt Helsley <matthltc@us.ibm.com>
Acked-by: Serge E. Hallyn <serue@us.ibm.com>
Tested-by: Matt Helsley <matthltc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:34 -07:00
Matt Helsley
83224b0837 container freezer: add TIF_FREEZE flag to all architectures
This patch series introduces a cgroup subsystem that utilizes the swsusp
freezer to freeze a group of tasks.  It's immediately useful for batch job
management scripts.  It should also be useful in the future for
implementing container checkpoint/restart.

The freezer subsystem in the container filesystem defines a cgroup file
named freezer.state.  Reading freezer.state will return the current state
of the cgroup.  Writing "FROZEN" to the state file will freeze all tasks
in the cgroup.  Subsequently writing "RUNNING" will unfreeze the tasks in
the cgroup.

* Examples of usage :

   # mkdir /containers/freezer
   # mount -t cgroup -ofreezer freezer  /containers
   # mkdir /containers/0
   # echo $some_pid > /containers/0/tasks

to get status of the freezer subsystem :

   # cat /containers/0/freezer.state
   RUNNING

to freeze all tasks in the container :

   # echo FROZEN > /containers/0/freezer.state
   # cat /containers/0/freezer.state
   FREEZING
   # cat /containers/0/freezer.state
   FROZEN

to unfreeze all tasks in the container :

   # echo RUNNING > /containers/0/freezer.state
   # cat /containers/0/freezer.state
   RUNNING

This patch:

The first step in making the refrigerator() available to all
architectures, even for those without power management.

The purpose of such a change is to be able to use the refrigerator() in a
new control group subsystem which will implement a control group freezer.

[akpm@linux-foundation.org: fix sparc]
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Signed-off-by: Matt Helsley <matthltc@us.ibm.com>
Acked-by: Pavel Machek <pavel@suse.cz>
Acked-by: Serge E. Hallyn <serue@us.ibm.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Nigel Cunningham <nigel@tuxonice.net>
Tested-by: Matt Helsley <matthltc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:33 -07:00
Linus Torvalds
e4856a70cf Merge branch 'personality' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
* 'personality' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [PATCH] remove unused ibcs2/PER_SVR4 in SET_PERSONALITY
2008-10-16 12:32:52 -07:00
Thomas Gleixner
4b1135a277 genirq: fix name space collisions of nr_irqs in arch/*
local shadows of global variables are _bad_

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-16 16:53:30 +02:00
Martin Schwidefsky
0b59268285 [PATCH] remove unused ibcs2/PER_SVR4 in SET_PERSONALITY
The SET_PERSONALITY macro is always called with a second argument of 0.
Remove the ibcs argument and the various tests to set the PER_SVR4
personality.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-16 15:40:05 +02:00
Dominik Brodowski
459fc208ab cpufreq: remove policy->governor setting in drivers initialization
As policy->governor is already set to CPUFREQ_DEFAULT_GOVERNOR in the
(always built-in) cpufreq core, we do not need to set it in the drivers.
This fixes the sparc64 allmodconfig build failure.

Also, remove a totally useles setting of ->policy in cpufreq-pxa3xx.c.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-15 16:42:47 -07:00
Haavard Skinnemoen
72a1419a9d avr32: Add defconfig for the favr-32 board
Taken from buildroot.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-14 13:22:19 +02:00
David Woodhouse
e758936e02 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	include/asm-x86/statfs.h
2008-10-13 17:13:56 +01:00
Haavard Skinnemoen
f040932fce avr32: Add defconfig for the mimc200 board
Provided by Mark Jackson.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-13 17:01:34 +02:00
Mark Jackson
5b50c166b7 avr32: Add MIMC200 board support
Please consider the following patch which adds support for a new AVR32
based board.

The board is closely based on Atmel's NGW100 reference board, but has an
extra 8MByte FLASH and 128KByte FRAM.

Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-13 16:36:25 +02:00
Mark Jackson
198f29358a avr32: Fix MIMC200 board use of SPD network pins
The MIMC200 board uses the SPD output pin from the Ethernet MACs for
other purposes.

One of these is as a board-reset, so I've had to #define off the SPD
output pin declaration.

This is probably not the best way of achieving this, but works in the
current framework.

Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-13 16:36:11 +02:00
Hans-Christian Egtvedt
45c349b58c avr32: add support for EarthLCD Favr-32 board
This patch adds support for the Favr-32 board made by EarthLCD.

This kit, which is also called ezLCD-101, has a 10.4" touch screen LCD panel,
16 MB 32-bit SDRAM, 8 MB parallel flash, Ethernet, audio out, USB device,
SD-card slot, USART and various other connectors for cennecting stuff to SPI,
I2C, GPIO, etc.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-13 16:01:18 +02:00
Hans-Christian Egtvedt
a3bee42f05 avr32: Add support for EVKLCD10X addon boards
This patch lets the user enable support for EVKLCD100 and EVKLCD101
(refered to by EVKLCD10X). By enabling EVKLCD10X support the LCD
controller and AC97 controller platform devices are added.

The user can also choose between the EVKLCD100 (QVGA display) and the
EVKLCD101 (VGA display), this is added to automagically select the
correct panel timing and resolution parameters.

Enabling support for EVKLCD10X addon board will cripple the MCI platform
device a bit since they share two GPIO lines (detect and write-protect).
These two lines are disabled when EVKLCD10X is enabled.

The default configurations are based upon ATNGW100, but with added AC97C
and LCDC driver. Virtual terminal is also enabled by default for
EVKLCD10X boards.

Verified on hardware with a NGW100 + EVKLCD100/101.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-13 12:56:24 +02:00
Haavard Skinnemoen
1d3ba686ed avr32: Kconfig: Remove pointless if around atstk1000 include
The contents of the ATSTK1000 Kconfig file itself is completely
conditional, so including it conditionally makes no sense and only adds
clutter.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-13 12:48:14 +02:00
Haavard Skinnemoen
6eb3ebe04d avr32: Fix build failures in board code
Fix a few instances of board code breakage introduced by the atmel-mci
platform interface changes.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-12 16:13:28 +02:00
Julien May
caf18f19ee avr32: Allow selecting multiple pins at once
at32_select_periph() now takes an u32 bitmask rather than a single pin.
This allows to set multiple pins at once.

Signed-off-by: Alex Raimondi <mailinglist@miromico.ch>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-12 15:54:00 +02:00
Haavard Skinnemoen
0d62950125 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/atmel-mci-2.6.28 2008-10-12 15:44:33 +02:00
Haavard Skinnemoen
b3bc2c5562 avr32: Minor pm_power_off cleanup
Include <linux/pm.h> to see the declaration of pm_power_off, and remove
unneeded NULL initializer.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-08 18:44:58 +02:00
Haavard Skinnemoen
520bab804e avr32: Implement {read,write}[bwl]_be
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-08 18:44:57 +02:00
Haavard Skinnemoen
65e8b083fc atmel-mci: Add experimental DMA support
This adds support for DMA transfers through the generic DMA engine
framework with the DMA slave extensions.

The driver has been tested using mmc-block and ext3fs on several SD,
SDHC and MMC+ cards. Reads and writes work fine, with read transfer
rates up to 7.5 MiB/s on fast cards with debugging disabled.

Unfortunately, the driver has been known to lock up from time to time
with DMA enabled, so DMA support is currently optional and marked
EXPERIMENTAL. However, I didn't see any problems while testing 13
different cards (MMC, SD and SDHC of different brands and sizes), so I
suspect the "Initialize BLKR before sending data transfer command" fix
that was posted earlier fixed this as well.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-05 20:39:21 +02:00
Haavard Skinnemoen
965ebf33ea atmel-mci: support multiple mmc slots
The Atmel MCI controller can drive multiple cards through separate sets
of pins, but only one at a time. This patch adds support for
multiplexing access to the controller so that multiple card slots can be
used as if they were hooked up to separate mmc controllers.

The atmel-mci driver registers each slot as a separate mmc_host. Both
access the same common controller state, but they also have some state
on their own for card detection/write protect handling, and separate
shadows of the MR and SDCR registers.

When one of the slots receives a request from the mmc core, the common
controller state is checked. If it's idle, the request is submitted
immediately. If not, the request is added to a queue. When a request is
done, the queue is checked and if there is a queued request, it is
submitted before the completion callback is called.

This patch also includes a few cleanups and fixes, including a locking
overhaul. I had to change the locking extensively in any case, so I
might as well try to get it right. The driver no longer takes any
irq-safe locks, which may or may not improve the overall system
performance.

This patch also adds a bit of documentation of the internal data
structures.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-05 20:39:21 +02:00
Haavard Skinnemoen
6b918657b7 atmel-mci: Platform code for supporting multiple mmc slots
Add the necessary platform infrastructure to support multiple mmc/sdcard
slots all at once through a single controller. Currently, the driver
will use the first valid slot it finds and stick with that, but later
patches will add support for switching between several slots on the fly.

Extend the platform data structure with per-slot information: MMC/SDcard
bus width and card detect/write protect pins. This will affect the pin
muxing as well as the capabilities announced to the mmc core.

Note that board code is now required to supply a mci_platform_data
struct to at32_add_device_mci().

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-05 20:39:21 +02:00
Alex Raimondi
300bb76251 avr32: Replace static clock list with dynamic linked list
This replaces the at32_clock_list array with a linked list.
Clocks can now be registered (added) to the list.

Signed-off-by: Alex Raimondi <raimondi@miromico.ch>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-05 19:33:48 +02:00
Uwe Kleine-König
787928e747 avr32: Use platform_driver_probe for pdc platform driver
The probe function of the pdc platform driver lives in the init section
and so a pdc device that is created after the init section is discarded
probably results in an oops.  Even if this cannot happen, using
platform_driver_probe is cleaner.  (If this can happen and should be
supported the probe function must live in the devinit section instead.)

Signed-off-by: Uwe Kleine-König <ukleinek@strlen.de>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-22 09:51:03 +02:00
Uwe Kleine-König
d6634db8fe avr32: Use platform_driver_probe for pio platform driver
The probe function of the pio platform driver lives in the init section
and so a pio device that is created after the init section is discarded
probably results in an oops.  Even if this cannot happen, using
platform_driver_probe is cleaner.  (If this can happen and should be
supported the probe function must live in the devinit section instead.)

Signed-off-by: Uwe Kleine-König <ukleinek@strlen.de>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-22 09:51:03 +02:00
Haavard Skinnemoen
ece2678c62 avr32: Provide a way to deselect pins in the portmux
Currently, setting up the portmux is completely one-shot: Once a pin is
muxed, the portmux driver will complain loudly and refuse to do anything
if you try to set up the same pin again.

Sometimes, it may be necessary to change the configuration of a pin
after it has been set up initially. This patch adds a way to undo the
previous configuration, allowing the pin to be reconfigured.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-22 09:51:02 +02:00
David Brownell
96706600de ngw100: export J15 through sysfs
The NGW100 board has jumper J15 (near the reset button) which
is unused.  This patch exports it through the GPIO sysfs support
(as /sys/class/gpio/gpio62/value) so that it's easily queried
by boot scripts or whatever might want to know if the jumper
has been installed (value = 0) or not (value = 1, "default").

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
[haavard.skinnemoen@atmel.com: add missing include]
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-22 09:51:01 +02:00
Julien May
7066412488 avr32: Allow fine-grained control over LCDC pins
This replaces the pin_config param with an u64 pin_mask in
at32_add_device_lcdc, allowing a board-maintainer to indivually select
specific lcdc pins.

Signed-off-by: Alex Raimondi <raimondi@miromico.ch>
Signed-off-by: Julien May <jmay@miromico.ch>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-22 09:51:01 +02:00
Marco Stornelli
48c1fd3882 avr32: added mem kernel command line option support
Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-22 09:51:01 +02:00
Nikolaus Voss
3d25615147 Add kernel support for oprofile callgraphs on AVR32
This patch adds backtracing capability to oprofile profiling in kernel
and user mode on AVR32. This is done by going through the frames on the
stack and adding oprofile traces for all return addresses. The code
being profiled has to be compiled with frame pointers to make this work.

Signed-off-by: Nikolaus Voss <n.voss@weinmann.de>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-22 09:51:01 +02:00
Harvey Harrison
f3c450be7b avr32: use the new byteorder headers
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
[haavard.skinnemoen@atmel.com: fix <mach/io.h> build breakage]
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-22 09:51:00 +02:00
Manfred Spraul
3d431a7427 avr32: nmi_enter() without nmi_exit()
While updating the rcu code, I noticed that do_nmi() for AVR32 is odd:
There is an nmi_enter() call without an nmi_exit().
This can't be correct, it breaks rcu (at least the preempt version) and
lockdep.

[haavard.skinnemoen@atmel.com: fixed another case that returned directly]
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-19 20:08:08 +02:00
Hans-Christian Egtvedt
73d4393d1d avr32: fix sys_sync_file_range() call convention
On AVR32, all parameters beyond the 5th are passed on the stack. System
calls don't use the stack -- they borrow a callee-saved register
instead. This means that syscalls that take 6 parameters must be called
through a stub that pushes the last parameter on the stack.

This patch adds a stub for sync_file_range syscall on AVR32
architecture.  Tested with uClibc snapshot.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-19 18:21:31 +02:00
Hans-Christian Egtvedt
e37925ebdb avr32: add generic_find_next_le_bit bit function
This patch implements the generic_find_next_le_bit bit function for AVR32
architecture. This is used by EXT4 file system.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-19 18:21:30 +02:00
Markus Heidelberg
1b771c12b5 avr32: add .gitignore files
Ignore Kernel binaries, kernel/vmlinux.lds and a log file.

Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-19 18:21:29 +02:00
Haavard Skinnemoen
7fb61a7b6f atstk1000: fix build breakage with BOARD_ATSTK100X_SW2_CUSTOM=y
The #ifdef surrounding the code adding the mmc controller had a typo,
causing it to be compiled even when mmc was supposed to be disabled.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-19 18:21:29 +02:00
Adrian Bunk
9d5a9e7465 Remove asm/a.out.h files for all architectures without a.out support.
This patch also includes the required removal of (unused) inclusion of
<asm/a.out.h> <linux/a.out.h>'s in the arch/ code for these
architectures.

[dwmw2: updated for 2.6.27-rc]
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-09-06 19:30:24 +01:00
Humphrey Bucknell
84c4f2f21a avr32: pm_standby low-power ram bug fix
The value stored into the SDRAMC LPR register should be the current
value of the register with the Self-refresh value set in the lower bit
field.

The bug involved only the Self-refresh value being written to the
register, thus over writing any low-power ram settings.

Signed-off-by: Humphrey Bucknell <hbucknell@saitek.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-01 13:04:09 +02:00
Haavard Skinnemoen
9e3f544d79 avr32: Fix lockup after Java stack underflow in user mode
When using the Java Extension Module hardware, a Java stack underflow or
overflow trap may cause the system to enter an infinite exception loop.
Although there's no kernel support for the Java hardware yet, we need to
be able to recover from this situation and keep the system running.

This patch adds code to detect and fixup this situation in the critical
exception handler and terminate the faulting process. We may have to
rethink how to handle this more gracefully when the necessary kernel
support for hardware-accelerated Java is added.

Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-01 13:04:04 +02:00