Commit graph

209 commits

Author SHA1 Message Date
Michael Chan
c73b1d1f26 [BNX2]: Update version to 1.7.4.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-23 19:49:48 -08:00
Michael Chan
38ea3686f6 [BNX2]: Disable parallel detect on an HP blade.
Because of some board issues, we need to disable parallel detect on
an HP blade.  Without this patch, the link state can become stuck
when it goes into parallel detect mode.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-23 19:48:57 -08:00
Michael Chan
a2724e2559 [BNX2]: More 5706S link down workaround.
The previous patches to workaround the 5706S on an HP blade were not
sufficient.  The link state still does not change properly in some
cases.  This patch adds polling to make it completely reliable.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-23 19:47:44 -08:00
Andrew Morton
fefa864530 bnx2: section fix
gcc-3.4.4 on powerpc:

drivers/net/bnx2.c:67: error: version causes a section type conflict

Cc: Jeff Garzik <jeff@garzik.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-09 23:17:15 -08:00
Michael Chan
c26736ec17 [BNX2]: Fix ASYM PAUSE advertisement for remote PHY.
We were checking for the ASYM_PAUSE bit for 1000Base-X twice instead
checking for both the 1000Base-X bit and the 10/100/1000Base-T bit.
The purpose of the logic is to tell the firmware that ASYM_PAUSE is
set on either the Serdes or Copper interface.

Problem was discovered by Roel Kluin <12o3l@tiscali.nl>

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:28:28 -08:00
Michael Chan
18c0226e3c [BNX2]: Update version to 1.7.3.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:17 -08:00
Michael Chan
83e3fc89bb [BNX2]: Fine-tune flow control on 5709.
Make use of the programmable high/low water marks in 5709 for
802.3 flow control.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:16 -08:00
Michael Chan
62a8313cdd [BNX2]: Remove CTX_WR macro.
The CTX_WR macro is unnecessary and obfuscates the code.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:15 -08:00
Michael Chan
2726d6e126 [BNX2]: Remove REG_WR_IND/REG_RD_IND macros.
The REG_WR_IND/REG_RD_IND macros are unnecessary and obfuscate the
code.  Many callers to these macros read and write shared memory from
the bp->shmem_base, so we add 2 similar functions that automatically
add the shared memory base.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:14 -08:00
Michael Chan
6f743ca052 [BNX2]: Refine tx coalescing setup.
Make the tx coalescing setup code independent of the MSIX vector.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:13 -08:00
Michael Chan
f3014c0cb6 [BNX2]: Fix 5706 serdes link down bug.
1. Correct the MII expansion serdes control register definition.
2. Check an additional RUDI_INVALID bit when determining 5706S link.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:12 -08:00
Al Viro
b491edd581 bnx2 annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:10:32 -08:00
Michael Chan
583c28e564 [BNX2]: Fix driver phy_flags name space.
Prefix "bp->phy_flags" names with BNX2_PHY_FLAG_* for consistency.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:10:23 -08:00
David S. Miller
f86e82fb54 [BNX2]: Fix driver software flag namespace.
Prefix "bnx2->flags" names with BNX2_* for consistency.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:10:16 -08:00
Michael Chan
feebb33183 [BNX2] Update version to 1.7.2.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:10:16 -08:00
Michael Chan
b2fadeae13 [BNX2]: Add link-down workaround on 5706 serdes.
In some blade systems using the 5706 serdes, the hardware sometimes
does not properly generate link down interrupts.  We add a workaround
in the driver's timer to force a link-down when some PHY registers
report loss of SYNC.

The parallel detect logic is cleaned up slightly to better integrate
the workaround.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:10:15 -08:00
Michael Chan
1097f5e921 [BNX2]: Fix minor bug in bnx2_has_work().
It is more correct to get the status block from the bnx2_napi struct
instead of the bnx2 struct.  It happens that they are the same in this
case because we are using the first MSIX vector.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:10:14 -08:00
Michael Chan
2dd201d7b7 [BNX2]: Disable jumbo rx paging on 5709 Ax.
The chip has problem running in this mode and needs to be disabled.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:10:13 -08:00
Al Viro
79ea13ce07 NULL noise in drivers/net
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:07:12 -08:00
Michael Chan
2ba582b782 [BNX2]: Fix compiler warning.
Change bnx2_init_napi() to void.

Warning was noted by DaveM.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:57:40 -08:00
Michael Chan
f13561cb2f [BNX2]: Update version to 1.7.1.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:57:40 -08:00
Michael Chan
57851d8453 [BNX2]: Enable new tx ring.
Enable new tx ring and add new MSIX handler and NAPI poll function
for the new tx ring.  Enable MSIX when the hardware supports it.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:57:39 -08:00
Michael Chan
c76c04758b [BNX2]: Add support for a new tx ring.
To separate TX IRQs into a different MSIX vector, we need to
support a new tx ring.  The original tx ring will still be used
when not using MSIX.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:57:38 -08:00
Michael Chan
b4b360420d [BNX2]: Support multiple MSIX IRQs.
Change bnx2_napi struct into an array and add code to manage multiple
IRQs.  MSIX hardware structures and new registers are also added.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:57:37 -08:00
Michael Chan
a1f6019090 [BNX2]: Move rx indexes into bnx2_napi struct.
Rx related fields used in NAPI polling are moved from the main
bnx2 struct to the bnx2_napi struct.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:57:37 -08:00
Michael Chan
a550c99bc3 [BNX2]: Move tx indexes into bnx2_napi struct.
Tx related fields used in NAPI polling are moved from the main
bnx2 struct to the bnx2_napi struct.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:57:36 -08:00
Michael Chan
35efa7c1f4 [BNX2]: Introduce new bnx2_napi structure.
Introduce a bnx2_napi structure that will hold a napi_struct and
other fields to handle NAPI polling for the napi_struct.  Various tx
and rx indexes and status block pointers will be moved from the main
bnx2 structure to this bnx2_napi structure.

Most NAPI path functions are modified to be passed this bnx2_napi
struct pointer.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:57:35 -08:00
Michael Chan
6d866ffc69 [BNX2]: Restructure IRQ datastructures.
Add a table to keep track of multiple IRQs and restructure the IRQ
request and free functions so that they can be easily expanded to
handle multiple IRQs.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:57:34 -08:00
Michael Chan
ead7270b99 [BNX2]: Add function to fetch hardware tx index.
This makes the code cleaner and easier to support different tx rings.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:57:33 -08:00
Michael Chan
a0d142c628 [BNX2]: Update version to 1.6.9.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:57:33 -08:00
Michael Chan
84eaa18771 [BNX2]: Enable S/G for jumbo RX.
If the MTU requires more than 1 page for the SKB, enable the page ring
and calculate the size of the page ring.  This will guarantee order-0
allocation regardless of the MTU size.

Fixup loopback test packet size so that we don't deal with the pages
during loopback test.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:57:32 -08:00
Michael Chan
1db82f2aec [BNX2]: Add fast path code to handle RX pages.
Add function to reuse a page in case of allocation or other errors.
Add code to construct the completed SKB with the additional data in
the pages.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:57:31 -08:00
Michael Chan
47bf4246a3 [BNX2]: Add init. code to handle RX pages.
Add new fields to keep track of the pages and the page rings.
Add functions to allocate and free pages.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:57:30 -08:00
Michael Chan
110d0ef990 [BNX2]: Update firmware to support S/G RX buffers.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:57:30 -08:00
Michael Chan
5d5d001504 [BNX2]: Restructure RX ring init. code.
Factor out the common functions that will be used to initialize the
normal RX rings and the page rings.

Change the copybreak constant RX_COPY_THRESH to 128.  This same
constant will be used for the max. size of the linear SKB when pages
are used.  Copybreak will be turned off when pages are used.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:57:29 -08:00
Michael Chan
85833c6269 [BNX2]: Restructure RX fast path handling.
Add a new function to handle new SKB allocation and to prepare the
completed SKB.  This makes it easier to add support for non-linear
SKB.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:57:28 -08:00
Michael Chan
e343d55c0a [BNX2]: Add ring constants.
Define the various ring constants to make the code cleaner.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:57:27 -08:00
Michael Chan
bbe4297421 [BNX2]: Update version to 1.6.9.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11 02:45:31 -08:00
Michael Chan
c09c262783 [BNX2]: Fix RX packet rot.
Packets can be left in the RX ring if the NAPI budget is reached.
This is caused by storing the latest rx index at the beginning of
bnx2_rx_int().  We may not process all the work up to this index
if the budget is reached and so some packets in the RX ring may rot
when we later check for more work using this stored rx index.

The fix is to not store this latest hw index and only store the
processed rx index.  We use a new function bnx2_get_hw_rx_cons()
to fetch the latest hw rx index.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11 02:45:30 -08:00
Michael Chan
fb0c18bd1f [BNX2]: Add PHY_DIS_EARLY_DAC workaround.
5709 Ax and Bx chips all need this workaround.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11 02:45:29 -08:00
Jiri Slaby
1977f03272 remove asm/bitops.h includes
remove asm/bitops.h includes

including asm/bitops directly may cause compile errors. don't include it
and include linux/bitops instead. next patch will deny including asm header
directly.

Cc: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:41 -07:00
Linus Torvalds
a57793651f Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (51 commits)
  [IPV6]: Fix again the fl6_sock_lookup() fixed locking
  [NETFILTER]: nf_conntrack_tcp: fix connection reopening fix
  [IPV6]: Fix race in ipv6_flowlabel_opt() when inserting two labels
  [IPV6]: Lost locking in fl6_sock_lookup
  [IPV6]: Lost locking when inserting a flowlabel in ipv6_fl_list
  [NETFILTER]: xt_sctp: fix mistake to pass a pointer where array is required
  [NET]: Fix OOPS due to missing check in dev_parse_header().
  [TCP]: Remove lost_retrans zero seqno special cases
  [NET]: fix carrier-on bug?
  [NET]: Fix uninitialised variable in ip_frag_reasm()
  [IPSEC]: Rename mode to outer_mode and add inner_mode
  [IPSEC]: Disallow combinations of RO and AH/ESP/IPCOMP
  [IPSEC]: Use the top IPv4 route's peer instead of the bottom
  [IPSEC]: Store afinfo pointer in xfrm_mode
  [IPSEC]: Add missing BEET checks
  [IPSEC]: Move type and mode map into xfrm_state.c
  [IPSEC]: Fix length check in xfrm_parse_spi
  [IPSEC]: Move ip_summed zapping out of xfrm6_rcv_spi
  [IPSEC]: Get nexthdr from caller in xfrm6_rcv_spi
  [IPSEC]: Move tunnel parsing for IPv4 out of xfrm4_input
  ...
2007-10-18 14:40:30 -07:00
Joe Perches
898eb71cb1 Add missing newlines to some uses of dev_<level> messages
Found these while looking at printk uses.

Add missing newlines to dev_<level> uses
Add missing KERN_<level> prefixes to multiline dev_<level>s
Fixed a wierd->weird spelling typo
Added a newline to a printk

Signed-off-by: Joe Perches <joe@perches.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Tilman Schmidt <tilman@imap.cc>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Greg KH <greg@kroah.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: James Smart <James.Smart@Emulex.Com>
Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:28 -07:00
Michael Chan
0c2bef4976 [BNX2]: Update version to 1.6.8.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-17 19:26:28 -07:00
Michael Chan
239cd34327 [BNX2]: Fix Serdes WoL bug.
The bug is in the code in bnx2_set_power_state() that assumes copper
devices when setting up WoL.  This is no longer true after adding WoL
support for Serdes devices.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-17 19:26:15 -07:00
Michael Chan
6dee642158 [BNX2]: Refine napi poll loop.
Need to read and store sblk->status_idx before checking for more work.
The status idx is later written back to the hardware when enabling
interrupts to acknowledge how much work has been processed.  If the
order is reversed, we can end up acknowledging work we haven't
processed.

When completing bnx2_poll(), we should always break out of the while
loop and return work_done instead of returning 0.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-12 02:01:21 -07:00
David S. Miller
6f53576316 [NET]: Fix NAPI completion handling in some drivers.
In order for the list handling in net_rx_action() to be
correct, drivers must follow certain rules as stated by
this comment in net_rx_action():

		/* Drivers must not modify the NAPI state if they
		 * consume the entire weight.  In such cases this code
		 * still "owns" the NAPI instance and therefore can
		 * move the instance around on the list at-will.
		 */

A few drivers do not do this because they mix the budget checks
with reading hardware state, resulting in crashes like the one
reported by takano@axe-inc.co.jp.

BNX2 and TG3 are taken care of here, SKY2 fix is from Stephen
Hemminger.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11 18:08:29 -07:00
Michael Chan
32d1316b91 [BNX2]: Update version to 1.6.7.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:55:58 -07:00
Michael Chan
846f5c622f [BNX2]: Fix default WoL setting.
Change the default WoL setting to match the NVRAM's setting.  It
always defaulted to WoL disabled before and caused a lot of confusion
for users.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:55:57 -07:00
Michael Chan
489310a440 [BNX2]: Fix remote PHY media detection problems.
The remote PHY media type and link status can change between
->probe() and ->open().  For correct operation, we need to get the
new status again during ->open().

The ethtool link test and loopback test are also fixed to work with
remote PHY.  PHY loopback is simply skipped when remote PHY is
present.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:55:57 -07:00