Commit graph

86 commits

Author SHA1 Message Date
Julia Lawall
b2d7c7f7a6 arch/sh/drivers/dma/dma-sh.c: Correct use of ! and &
In commit e6bafba5b4, a bug was fixed that
involved converting !x & y to !(x & y).  The code below shows the same
pattern, and thus should perhaps be fixed in the same way.

This is not tested and clearly changes the semantics, so it is only
something to consider.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@ expression E1,E2; @@
(
  !E1 & !E2
|
- !E1 & E2
+ !(E1 & E2)
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-27 10:28:48 +09:00
Magnus Damm
763a495a02 sh: revert dreamcast pci change
Commit e036eaa681 broke dreamcast pci, this
patch fixes that by reverting the dreamcast specific bits.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-26 14:14:56 +09:00
Roel Kluin
1de83e94e6 sh: heartbeat: ioremap is expected to succeed
ioremap is expected to succeed

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-26 14:06:43 +09:00
Magnus Damm
123100cf4f sh: fix pci io access for r2d boards
Use generic_io_base to point out the pci io window, and make sure the
highest port address used is SH7751_PCI_IO_SIZE - 1.

This patch fixes pci io port access for the r2d boards - CONFIG_8139TOO_PIO
now works as expected. So does the alsa driver for CMI8738.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Katsuya MATSUBARA <matsu@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14 14:25:41 +09:00
Magnus Damm
e036eaa681 sh: use ctrl_in/out for on chip pci access
This patch makes sure ctrl_inN/outN are used instead of inN/outN for on chip
pci registers. Without this patch addresses may be adjusted using the value
in generic_io_base. This patch makes it possible to set generic_io_base and
have pci without reading and writing all over the place.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Katsuya MATSUBARA <matsu@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14 14:25:32 +09:00
Stephen Rothwell
222dc791e1 sh: remove unneeded cast
now that platform_device_register_simple() takes a "const chat *".

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14 14:22:07 +09:00
Adrian Bunk
8f0e7d2405 PCI: Kconfig help: don't refer to the PCI-HOWTO
A HOWTO that hasn't been updated for half a dozen years no longer
"contains valuable information about which PCI hardware does work under
Linux and which doesn't".

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:26 -08:00
Magnus Damm
da2d7f4bc5 sh: update r7780rp interrupt code
This patch updates the board specific irq code for r7780rp. The new code is
very similar to the other highlander implementations, with the exception that
the r7780rp handles pci interrupts using IRL. To simplify the pci code and
use the same interrupt numbers as r7780mp and r7785rp we hook in to the
cpu specific pci vectors.

The pci interrupts and the push switch all work well with and without this
patch. CF and AX88796 are not ok though and the source of the problem is
unknown at this point. The AX88796 does for not detect it's proper mac
address (IPL gets it right) and the kernel hangs on CF access. As a workaround
this patch removes the CF and the AX88796 from the platform datain case of
r7780rp.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 16:24:01 +09:00
Magnus Damm
a724605cb7 sh: use declared coherent memory for dreamcast pci ethernet adapter
This patch makes the dreamcast use the recently added declared coherent
memory functions to point out the memory window suitable for dma.

Apart from cleaning up, this gives the dreamcast a proper memory allocator
for pci dma memory.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:19:04 +09:00
Nicholas Beck
4862ec0739 sh: Add support for SDK7780 board.
Add support for Renesas Technology Europe SDK7780 board.

Signed-off-by: Nicholas Beck <nbeck@mpc-data.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:19:04 +09:00
Paul Mundt
a5350a9686 sh: Kill off dead HS771RVoIP board support.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:19:03 +09:00
Yoshihiro Shimoda
7d740a066f sh: Add support for SH7763 CPU subtype.
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:19:02 +09:00
Yoshihiro Shimoda
31a49c4bf8 sh: Add support for SH7721 CPU subtype.
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:19:02 +09:00
Paul Mundt
b6d7b66609 sh: Get the SH-5 PCI support building.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:55 +09:00
Paul Mundt
b4eaa1cc7c sh: Kill off the rest of arch/sh64/kernel/.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:55 +09:00
Kay Sievers
af5ca3f4ec Driver core: change sysdev classes to use dynamic kobject names
All kobjects require a dynamically allocated name now. We no longer
need to keep track if the name is statically assigned, we can just
unconditionally free() all kobject names on cleanup.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:40 -08:00
Nobuhiro Iwamatsu
b0d98dc504 sh: Support PCI IO access of SH7780 base boards.
The IO access of PCI is not supported in R7780RP and the MS7780SE
board now. The support of the IO access mode of e100 and a lot of IDE
chips becomes possible by fixing the code.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-30 12:36:13 +09:00
Nobuhiro Iwamatsu
78ffeec462 sh: Fix PCI IO space base address of SH7780.
PCI IO space base address of SH7780 was wrong.
Change from 0xFE400000 to 0xFE200000.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-30 12:35:24 +09:00
Paul Mundt
f966918724 sh: Kill off the remaining ST40 cruft.
The ST40 stuff in-tree hasn't built for some time, and hasn't been
updated for over 3 years. ST maintains their own out-of-tree changes
and rebases occasionally, and that's ultimately where all of the ST40
users go anyways.

In order for the ST40 code to be brought up to date most of the stuff
removed in this changeset would have to be rewritten anyways, so there's
very little benefit in keeping the remnants around either.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 11:13:55 +09:00
Alejandro Martinez Ruiz
767f0d6867 sh: ARRAY_SIZE() cleanup
I'm converting most array size calculations under arch/ to use the
ARRAY_SIZE() macro. This is the (tiny) patch for sh.

Signed-off-by: Alejandro Martinez Ruiz <alex@flawedcode.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-10-30 08:44:13 +09:00
Ralf Baechle
622a9edd91 Remove dma_cache_(wback|inv|wback_inv) functions
dma_cache_(wback|inv|wback_inv) were the earliest attempt on a generalized
cache managment API for I/O purposes.  Originally it was basically the raw
MIPS low level cache API exported to the entire world.  The API has
suffered from a lack of documentation, was not very widely used unlike it's
more modern brothers and can easily be replaced by dma_cache_sync.  So
remove it rsp.  turn the surviving bits back into an arch private API, as
discussed on linux-arch.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Paul Mackerras <paulus@samba.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Kyle McMartin <kyle@parisc-linux.org>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:57 -07:00
Paul Mundt
e71cf2b63c sh: Revert incorrect license string changes.
These were right the first time. Either a thinko or
building in the wrong tree. Revert this.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-24 17:49:51 +09:00
Kristoffer Ericson
4f247e84bd sh: dma: Fix up build for SH7709 support.
Trivial build fixes for SH7709.

Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:53 +09:00
Magnus Damm
9d4c826259 sh: remove sh7780 interrupt controller hack from pci code
This patch removes the sh778x specific pci code that pokes in the
interrupt controller and overwrites things. The new and improved IRL
code manages this in plat_irq_setup() and plat_irq_setup_pins()
instead.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:52 +09:00
Paul Mundt
2d009328db sh: More license string silliness.
'GPL v2' vs 'GPLv2'.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:51 +09:00
Paul Mundt
8786c952c1 sh: heartbeat driver update.
Add some flags for the heartbeat driver, and kill off some duplication
in the bit positions for the boards that don't have special cases.

This also allows for variable access widths and inversion.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:51 +09:00
Magnus Damm
2eeec85638 sh: intc - convert board specific r2d code
This patch converts the board specific interrupt code for r2d to make
use of intc. While at it we improve the Kconfig to avoid confusion.

- Two sets of interrupt tables exist - one for R2D-1 and one for R2D-PLUS.
- R2D-1 and R2D-PLUS use the same irq constants.
- R2D-1 has AX88796 support, R2D-PLUS does not hook up that IRQ.
- R2D-PLUS has KEY support, R2D-1 does not hook up that IRQ.
- The number and order of IRQ values are disconnected from register bits.
- Interrupt sources now start from IRQ 100.
- The machvec demux function converts from irlm IRQ 0-14 to IRQ 100++.

Tested on R2D-1 and R2D-PLUS boards.

Version 2 adds CONFIG_RTS7751R2D_1 and CONFIG_RTS7751R2D_PLUS together
with intc structured as __initdata.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:50 +09:00
Markus Brunner
3ea6bc3de4 sh: Add SH7720 CPU support.
This adds support for the SH7720 (SH3-DSP) CPU.

Signed-off by: Markus Brunner <super.firetwister@gmail.com>
Signed-off by: Mark Jonas <toertel@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:49 +09:00
Adrian McMenamin
eb695dbf00 sh: Fix Dreamcast DMA issues.
The current SH DMA API is somewhat broken, not correctly matching
virtual channel to the correct SH DMAC. This wasn't noticeable when
using g2 DMA for the sound driver - one channel 0 is as good as any
other! - but caused the pvr2 driver to fail.

This patch fixes the pvr2 problem and consequently fixes the sound
driver to ensure it continues to function.

Signed-off by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-24 13:30:55 +09:00
Paul Mundt
bf73af2314 sh: heartbeat: Shut up resource size warning.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20 17:35:42 +09:00
Magnus Damm
ee54505199 sh: update r2d defconfig and fix SH7751R pci compliation
This patch updates the r2d board support in a few ways:

- CPU_SUBTYPE_SH7751R is selected in the defconfig to play well
  with the r2d board Kconfig entry. Without this the defconfig
  results in no board enabled.

- Enable EARLY_PRINTK.
- Enable SH_STANDARD_BIOS
	- this works well for early printk on the r2d board.

- Add "earlyprink=bios" to the cmdline for early serial port
  output by default.

- CONFIG_SUBTYPE_SH7751R support is added to the sh-specific
  pci makefile.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20 17:25:48 +09:00
Paul Mundt
fc10020292 sh: Make on-chip DMA channel selection explicit.
Currently this has a prompt to allow users to change it. There's
no reason to do this, and it has caused breakage and confusion
in the past, so remove it entirely.

We'll get rid of this when the whole driver is tidied for
the driver model.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20 14:24:57 +09:00
Paul Mundt
3e7678333a sh: Fix up CPU dependencies for on-chip DMAC.
We only handle SH-3 and SH-4 at present, don't expose it to the
other CPUs.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20 14:23:04 +09:00
Paul Mundt
bd5f0d1c25 sh: Fix up PCI section mismatch warnings.
Flag pcibios_setup() and pcibios_fixup_bus() as __devinit.
Follows the sh64 change.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20 13:22:47 +09:00
Paul Mundt
e5e3dfc80a sh: push-switch: Correct license string.
This was accidentally set as "GPLv2", whereas the kernel expects v2
to be written "GPL v2", this caused complaints regarding the use
of the platform device APIs when built as a module.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20 12:18:20 +09:00
Paul Mundt
a1e2833d13 sh: Kill off broken dma page ops.
There's no point in keeping these around, they've been broken
for some time, and the dmaenging/async_tx framework provides a
far more reasonable interface.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-11 15:56:31 +09:00
Paul Mundt
357d59469c sh: Tidy up dependencies for SH-2 build.
SH-2 can presently get in to some pretty bogus states, so
we tidy up the dependencies a bit and get it all building
again.

This gets us a bit closer to a functional allyesconfig
and allmodconfig, though there are still a few things to
fix up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-11 15:32:07 +09:00
Manuel Lauss
bdff33ddd9 sh: Trivial fix for dma-api compile failure.
Trivial fix for arch/sh/drivers/dma/dma-api.c compile failure:

  CC      arch/sh/drivers/dma/dma-api.o
a/arch/sh/drivers/dma/dma-api.c: In function 'dma_wait_for_completion':
a/arch/sh/drivers/dma/dma-api.c:233: error: 'TASK_UNINTERRUPTIBLE' undeclared (first use in this function)
a/arch/sh/drivers/dma/dma-api.c:233: error: (Each undeclared identifier is reported only once
a/arch/sh/drivers/dma/dma-api.c:233: error: for each function it appears in.)
a/arch/sh/drivers/dma/dma-api.c:233: warning: implicit declaration of function 'schedule'

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-31 13:44:17 +09:00
Simon Arlott
e868d61272 spelling fixes: arch/sh/
Spelling fixes in arch/sh/.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-21 14:31:39 +09:00
Manuel Lauss
fc467a2623 sh: SH7760 DMABRG support.
The DMABRG is a special DMA unit within the SH7760 which does data
transfers from main memory to Audio units and USB shared memory.
It has 3 IRQ lines which generate 10 events, which have to be masked
unmasked and acked in a single 32bit register. It works independently
from the tradition SH DMAC, but blocks usage of DMAC channel 0.

This patch adds 2 functions to associate callbacks with DMABRG events
and initialization.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09 17:36:15 +09:00
Randy Dunlap
e63340ae6b header cleaning: don't include smp_lock.h when not used
Remove includes of <linux/smp_lock.h> where it is not used/needed.
Suggested by Al Viro.

Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc,
sparc64, and arm (all 59 defconfigs).

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:07 -07:00
Ryusuke Sakato
39374aadcd sh: R7785RP board updates.
Some fixups for the R7785RP board. Gets iVDR working.

Signed-off-by: Ryusuke Sakato <sakato.ryusuke@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:11:57 +00:00
Nobuhiro Iwamatsu
b7aee517c8 sh: se7780 PCI support.
Add support for the SH7780 PCIC on the Solution Engine 7780,
missing from the previous board-support patch.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.zh@hitachi.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:11:55 +00:00
Nobuhiro Iwamatsu
b75762302e sh: SH7780 Solution Engine board support.
This adds support for the SH7780-based Solution Engine reference board.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.zh@hitachi.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:11:55 +00:00
Paul Mundt
cd6c7ea234 sh: Add a dummy SH-4 PCIC fixup.
By default we don't have anything to fix up for the SH-4 PCIC, boards can
overload this as necessary.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:11:55 +00:00
Nobuhiro Iwamatsu
c86c5a9104 sh: L-BOX RE2 support.
This adds support for the L-BOX RE2 router.

	http://www.nttcom.co.jp/l-box/

L-BOX RE2 is a SH7751R-based router. It has CF, Cardbus, serial,
and LAN x2. This is one of the very few SH boards that a general
person can obtain now.

The L-BOX shipped with a 2.4.28 kernel, this is a rewritten patch
adding it to current git.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:54 +00:00
kogiidena
00e8c494a1 sh: landisk updates.
Updates for the landisk board:

	- The push_switch framework was used.
	- landisk_pwb.c was divided into psw.c and gio.c.
	- pata_platform was supported in USL-5P.
	- irq.c was rewritten.
	- io.c was replaced with generic I/O routines.

Signed-off-by: kogiidena <kogiidena@eggplant.ddo.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:54 +00:00
Takashi YOSHII
f6072896e3 sh: heartbeat double 0 fix.
This implements stricter and more compliant knightrider strobing in the
heartbeat handler. While there still seems to be some debate as to
whether the double 0 is "more" correct or not, this updated version
appears to have general consensus. Fixes a long-term "bug".

Signed-off-by: Takashi YOSHII <takashi.yoshii.ze@hitachi.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:53 +00:00
Paul Mundt
32351a28a7 sh: Add SH7785 Highlander board support (R7785RP).
This adds preliminary support for the SH7785-based Highlander board.
Some of the Highlander support code is reordered so that most of it
can be reused directly.

This also plugs in missing SH7785 checks in the places that need it,
as this is the first board to support the CPU.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:53 +00:00
Hideo Saito
bb68660943 sh: Fix PCI BAR address-space wraparound.
When a SH7751R system includes a card that has wide range space
like a graphics card, the pci-pci bridge controller can't set the
correct address range.

For example, when *lower_limit is 0xfd000000 and bar_size is
0x4000000, in the following code at arch/sh/drivers/pci/pci-auto.c,
0x0 is set in bar_value.

pciauto_setup_bars()
{
...
                bar_value = ((*lower_limit - 1) & ~(bar_size - 1)) + bar_size;
...
                *lower_limit = bar_value + bar_size;
}

As a result, 0x4000000 is set in *lower_limit, but this value is wrong.

The following patch avoids this problem by checking the range of the
value and refusing to update the BAR if the calculated value ends up
being bogus.

Signed-off-by: Hideo Saito <saito@densan.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-12 14:50:49 +09:00