Commit graph

83 commits

Author SHA1 Message Date
Randy Dunlap
0f5486ecf7 [PATCH] cciss: build with PROC_FS=n
RAID_UNKNOWN is used even when PROC_FS=n, so move it outside of the
CONFIG_PROC_FS block.

drivers/block/cciss.c:1910: error: 'RAID_UNKNOWN' undeclared (first use in this function)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: <mike.miller@hp.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-30 10:56:42 -08:00
Mike Miller
a52de245ef [PATCH] cciss: fix XFER_READ/XFER_WRITE in do_cciss_request
This patch fixes a stupid bug. Sometime during the 2tb enhancement I ended up
replacing the macros XFER_READ and XFER_WRITE with h->cciss_read and
h->cciss_write respectively. It seemed to work somehow at least on x86_64 and
ia64. I don't know how. But people started complaining about command timeouts
on older controllers like the 64xx series and only on ia32. This resolves the
issue reproduced in our lab. Please consider this for inclusion.

Thanks,
mikem

Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2006-12-18 11:00:14 +01:00
Mike Miller
89f97ad189 [PATCH] cciss: set default raid level when reading geometry fails
This patch sets a default raid level on a volume that either does not support
reading the geometry or reports an invalid geometry for whatever reason. We
were always setting some values for heads and sectors but never set a raid
level. This caused lots of problems on some buggy firmware. Please consider
this for inclusion.

Thanks,
mikem

Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2006-12-18 10:59:39 +01:00
Linus Torvalds
5faad62026 Merge branch 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block
* 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block:
  [PATCH] Fixup cciss error handling
  [PATCH] Allow as-iosched to be unloaded
  [PATCH 2/2] cciss: remove calls to pci_disable_device
  [PATCH 1/2] cciss: map out more memory for config table
  [PATCH] Propagate down request sync flag

Resolve trivial whitespace conflict in drivers/block/cciss.c manually.
2006-12-13 09:15:34 -08:00
Robert P. J. Day
5cbded585d [PATCH] getting rid of all casts of k[cmz]alloc() calls
Run this:

	#!/bin/sh
	for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do
	  echo "De-casting $f..."
	  perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f
	done

And then go through and reinstate those cases where code is casting pointers
to non-pointers.

And then drop a few hunks which conflicted with outstanding work.

Cc: Russell King <rmk@arm.linux.org.uk>, Ian Molton <spyro@f2s.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Greg KH <greg@kroah.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Paul Fulghum <paulkf@microgate.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Karsten Keil <kkeil@suse.de>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Ian Kent <raven@themaw.net>
Cc: Steven French <sfrench@us.ibm.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 09:05:58 -08:00
Mike Miller
872225ca77 [PATCH] cciss: remove calls to pci_disable_device
Remove calls to pci_disable_device except in fail_all_cmds.  The
pci_disable_device function does something nasty to Smart Array controllers
that pci_enable_device does not undo.  So if the driver is unloaded it
cannot be reloaded.

Also, customers can disable any pci device via the ROM Based Setup Utility
(RBSU).  If the customer has disabled the controller we should not try to
blindly enable the card from the driver.  Please consider this for
inclusion.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 09:05:49 -08:00
Mike Miller
a5b92873a8 [PATCH] cciss: map out more memory for config table
Map out more memory for our config table.  It's required to reach offset
0x214 to disable DMA on the P600.  I'm not sure how I lost this hunk.
Please consider this for inclusion.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 09:05:49 -08:00
Jens Axboe
2fc2c60df3 [PATCH] Fixup cciss error handling
The previous cciss commit removed the err_out_disable_pdev label, but
there was still a user of that. Fix that up.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2006-12-13 15:44:27 +01:00
mike.miller@hp.com
c4977f596c [PATCH 2/2] cciss: remove calls to pci_disable_device
This patch removes calls to pci_disable_device except in fail_all_cmds. The
pci_disable_device function does something nasty to Smart Array controllers
that pci_enable_device does not undo. So if the driver is unloaded it cannot be
reloaded.

Also, customers can disable any pci device via the ROM Based Setup Utility
(RBSU). If the customer has disabled the controller we should not try to
blindly enable the card from the driver.  Please consider this for inclusion.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2006-12-13 13:10:04 +01:00
mike.miller@hp.com
98040015bc [PATCH 1/2] cciss: map out more memory for config table
This patch maps out more memory for our config table. It's required to reach
offset 0x214 to disable DMA on the P600. I'm not sure how I lost this hunk.
Please consider this for inclusion.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2006-12-13 13:08:56 +01:00
Josef Sipek
6c648be6f4 [PATCH] struct path: convert block_drivers
Signed-off-by: Josef Sipek <jsipek@fsl.cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:44 -08:00
Mike Miller
1ecb9c0f3c [PATCH] cciss: cleanup cciss_interrupt mode
A pretty simple cleanup for cciss_interrupt_mode.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:30 -08:00
Mike Miller
799202cbd0 [PATCH] cciss: add support for 1024 logical volumes
Add the support for a large number of logical volumes.  We will soon have
hardware that support up to 1024 logical volumes.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:30 -08:00
Mike Miller
3833a748aa [PATCH] cciss: remove unused revalidate_allvol function
Remove the no longer used revalidate_allvol function.  It was replaced by
rebuild_lun_table.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:30 -08:00
Mike Miller
7a06f789e0 [PATCH] cciss: change cciss_open for consistency
Change our open to test for drv->heads like we do in other places in the
driver.  Mostly for consistency.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:30 -08:00
Mike Miller
92c4231aef [PATCH] cciss: set sector_size to 2048 for performance
Change the blk_queue_max_sectors from 512 to 2048.  This helps increase
performance.

[akpm@osdl.org: s/sector_size/max_sectors/]
Signed-off-by: Mike Miller <mike.miller@hp.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:29 -08:00
Mike Miller
f92e2f5f88 [PATCH] cciss: disable DMA prefetch on P600
Unconditionally disable DMA prefetch on the P600 controller.  An ASIC bug may
result in prefetching beyond the end of physical memory.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:29 -08:00
Mike Miller
de92391671 [PATCH] cciss: fix pci ssid for the E500 controller
Change the SSID on the E500 as a workaround for a firmware bug.  It looks like
the original patch was backed out between rc2 and rc4.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:29 -08:00
Mike Miller
f880632f96 [PATCH] cciss: increase number of commands on controller
Remove #define NR_CMDS and replace it w/hba[i]->nr_cmds.  Most Smart Array
controllers can support up to 1024 commands but the E200 family can only
support 128.  To prevent annoying "fifo full" messages we define nr_cmds on a
per controller basis by adding it the product table.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:29 -08:00
Mike Miller
4ff9a9a4ba [PATCH] cciss: reference driver support
Add the support to fire up on any HP RAID class device that has a valid cciss
signature.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:29 -08:00
Mike Miller
9d827c9e8a [PATCH] cciss: version change
Change the cciss version number to 3.6.14 to reflect the following
functionality changes added by the rest of the set.  They include:

 - Support to fire up on any HP RAID class controller
 - Increase nr_cmds to 512 for most controllers by adding it to the product table
 - PCI subsystem ID fix fix was pulled
 - Disable DMA prefetch for the P600 on IPF platforms
 - Change from 512 to 2048 sector_size for performance
 - Fix in cciss_open for consistency
 - Remove the no longer used revalidate_allvol function
 - Bug fix for busy configuring
 - Support for more than 16 logical volumes
 - Cleanups in cciss_interrupt_mode
 - Fix for iostats, it's been broken for several kernel releases

Signed-off-by: Mike Miller <mike.miller@hp.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:29 -08:00
Jens Axboe
b369c2cfa4 [PATCH] cciss: fix iostat
cciss needs to call disk_stat_add() for iostat to work.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-14 15:08:50 -08:00
Randy Dunlap
7b92aadfda [PATCH] cciss: fix printk format warning
Fix printk format warnings:
drivers/block/cciss.c:2000: warning: long long int format, long unsigned int arg (arg 2)
drivers/block/cciss.c:2035: warning: long long int format, long unsigned int arg (arg 2)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-28 11:30:53 -07:00
Matthew Wilcox
3f7705eab6 [PATCH] cciss: Fix warnings (and bug on 1TB discs)
CCISS was producing warnings about shifts being greater than the size of
the type and pointers being of incompatible type.  Turns out this is
because it's calling do_div on a 32-bit quantity.  Upon further
investigation, the sector_t total_size is being assigned to an int, and
then we're calling do_div on that int.  Obviously, sector_div is called for
here, and I took the chance to refactor the code a little.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-21 13:35:06 -07:00
David Howells
7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00
Dave Jones
038b0a6d8d Remove all inclusions of <linux/config.h>
kbuild explicitly includes this at build time.

Signed-off-by: Dave Jones <davej@redhat.com>
2006-10-04 03:38:54 -04:00
Peter Zijlstra
6e9a4738c9 [PATCH] completions: lockdep annotate on stack completions
All on stack DECLARE_COMPLETIONs should be replaced by:
DECLARE_COMPLETION_ONSTACK

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:24 -07:00
Metathronius Galabant
cc088d10d0 [PATCH] cciss: remove unneeded spaces in output for attached volumes
It removes the awkwards spaces after the "=" when displaying the
geometry of the attached volumes.

Before:
cciss: using DAC cycles
     blocks= 286734240 block_size= 512
     heads= 255, sectors= 32, cylinders= 35139

After:
cciss: using DAC cycles
     blocks=286734240 block_size=512
     heads=255, sectors=32, cylinders=35139

Signed-off-by: Metathronius Galabant <m.galabant@gmail.com>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:22 -07:00
Mike Miller (OS Dev)
00988a3514 [PATCH] cciss: support for >2TB logical volumes
Add support for logical volumes >2TB.  All SAS/SATA controllers support
large volumes.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:20 -07:00
Jens Axboe
a3b05e8f58 [PATCH] Kill various deprecated/unused block layer defines/functions
Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-30 20:29:38 +02:00
Mike Miller
1883c5aba9 [PATCH] cciss: version update, new hw
Add support for new hardware and bumps the version to 3.6.10.  It seems
there were several changes introduced including soft_irq.  I decided to
bump the major number to reflect these changes.  Since we're still
supporting older vendor kernels I need some way differentiate between
kernel versions <=2.6.10 and newer kernels >=2.6.16.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-13 07:32:16 -07:00
Jens Axboe
7b30f09245 [PATCH] cciss: fix stall with softirq handling and CFQ
We need to postpone the queue startup until after the softirq
handler has actually finished some requests, otherwise we could
be racing with cciss_softirq_done() and not actually restart
the queue handling.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-07-25 15:02:48 +02:00
Thomas Gleixner
69ab3912d1 [PATCH] irq-flags: drivers/block Use the new IRQF_ constants
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:49 -07:00
Greg Kroah-Hartman
ce7b0f46bb [PATCH] devfs: Remove the gendisk devfs_name field as it's no longer needed
And remove the now unneeded number field.
Also fixes all drivers that set these fields.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26 12:25:08 -07:00
Bjorn Helgaas
f82ccdb992 [PATCH] CCISS: tidy up product table indentation
Make each one fit on a line so it's easier to read.  I re-ordered
COMPAQ_CISSC/0x4091, which was out of order.  I double-checked these, but it
would be good if you'd also check them to make sure I didn't miss any.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Jeff Garzik <jeff@garzik.org>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25 10:01:22 -07:00
Bjorn Helgaas
7c83283556 [PATCH] CCISS: run through Lindent
cciss is full of inconsistent style ("for (" vs.  "for(", lines that end with
whitespace, lines beginning with a mix of spaces & tabs, etc).

This patch changes only whitespace.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25 10:01:21 -07:00
Bjorn Helgaas
e2019b58fa [PATCH] CCISS: remove parens around return values
Typical Linux style is "return -EINVAL", not "return(-EINVAL)".

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25 10:01:21 -07:00
Bjorn Helgaas
d14c4ab58c [PATCH] CCISS: fix a few spelling errors
Fix a few spelling errors.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25 10:01:21 -07:00
Bjorn Helgaas
5e8621e8bd [PATCH] CCISS: use ARRAY_SIZE without intermediates
It's easier to verify loop bounds if the array name is mentioned the for()
statement that steps through the array.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25 10:01:21 -07:00
Bjorn Helgaas
40aabb5815 [PATCH] CCISS: announce cciss%d devices with PCI address/IRQ/DAC info
We already print "cciss: using DAC cycles" or similar for every adapter found:
why not just identify the device we're talking about and include other useful
information?

Jeff Garzik <jeff@garzik.org>:

  Although this patch is correct, I would consider using dev_printk() rather
  than referencing pci_name() in printk() arguments.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25 10:01:21 -07:00
Bjorn Helgaas
4e570309e8 [PATCH] CCISS: request all PCI resources
We should call pci_request_regions() to claim all resources the device
decodes.  Previously, we claimed only the I/O port range.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25 10:01:21 -07:00
Bjorn Helgaas
c33ac89bc7 [PATCH] CCISS: disable device when returning failure
If something fails after we call pci_enable_device(), we should call
pci_disable_device() before returning the failure.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25 10:01:21 -07:00
Matt Mackall
8bd0b97e95 [PATCH] random: make CCISS use add_disk_randomness
Disk devices should use the add_disk_randomness API rather than
SA_SAMPLE_RANDOM.

Signed-off-by: Matt Mackall <mpm@selenic.com>
Cc: <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25 10:01:00 -07:00
Greg Kroah-Hartman
27c0ff868f [PATCH] CCISS: add device symlink to the block cciss block devices in sysfs
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 12:40:47 -07:00
Mike Miller
ca1e0484d9 [PATCH] cciss: bug fix for crash when running hpacucli
Fix a crash when running hpacucli with multiple logical volumes on a cciss
controller.  We were not properly initializing the disk->queue and causing
a fault.

Thanks to Hasso Tepper for reporting the problem.  Thanks to Steve Cameron
for root causing the problem.  Most of the patch just moves things around.
The fix is a one-liner.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Stephen Cameron <steve.cameron@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-17 14:24:57 -07:00
Eric Sesterhenn
89a7689e5c [PATCH] unused label in drivers/block/cciss.
this patch removes a warning about an unused label, by
moving the label into the ifdef.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Jens Axboe <axboe@suse.de>
2006-03-27 09:29:03 +02:00
Eric Sesterhenn
06ff37ffb4 [PATCH] kzalloc() conversion in drivers/block
this patch converts drivers/block to kzalloc usage.
Compile tested with allyesconfig.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Jens Axboe <axboe@suse.de>
2006-03-27 09:29:02 +02:00
Eric Sesterhenn
089fe1b23d BUG_ON() Conversion in drivers/block/
this changes if() BUG(); constructs to BUG_ON() which is
cleaner, contains unlikely() and can better optimized away.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-03-24 18:50:27 +01:00
Jens Axboe
2056a782f8 [PATCH] Block queue IO tracing support (blktrace) as of 2006-03-23
Signed-off-by: Jens Axboe <axboe@suse.de>
2006-03-23 20:00:26 +01:00
Patrick McHardy
61808c2bbb [PATCH] cciss: fix use-after-free in cciss_init_one
free_hba() sets hba[i] to NULL, the dereference afterwards results in this
crash.  Setting busy_initializing to 0 actually looks unnecessary, but I'm
not entirely sure, which is why I left it in.

cciss: controller appears to be disabled
Unable to handle kernel NULL pointer dereference at virtual address 00000370
 printing eip:
c1114d53
*pde = 00000000
Oops: 0002 [#1]
Modules linked in:
CPU:    0
EIP:    0060:[<c1114d53>]    Not tainted VLI
EFLAGS: 00010286   (2.6.16 #1)
EIP is at cciss_init_one+0x4e9/0x4fe
eax: 00000000   ebx: c132cd60   ecx: c13154e4   edx: c27d3c00
esi: 00000000   edi: c2748800   ebp: c2536ee4   esp: c2536eb8
ds: 007b   es: 007b   ss: 0068
Process swapper (pid: 1, threadinfo=c2536000 task=c2535a30)
Stack: <0>00000000 00000000 00000000 c13fdba0 c2536ee8 c13159c0 c2536f38
f7c74740
       c132cd60 c132cd60 ffffffed c2536ef0 c10c1d51 c2748800 c2536f04
c10c1d85
       c132cd60 c2748800 c132cd8c c2536f14 c10c1db8 c2748848 00000000
c2536f28
Call Trace:
 [<c10031d5>] show_stack_log_lvl+0xa8/0xb0
 [<c1003305>] show_registers+0x102/0x16a
 [<c10034a2>] die+0xc1/0x13c
 [<c1288160>] do_page_fault+0x38a/0x525
 [<c1002e9b>] error_code+0x4f/0x54
 [<c10c1d51>] pci_call_probe+0xd/0x10
 [<c10c1d85>] __pci_device_probe+0x31/0x43
 [<c10c1db8>] pci_device_probe+0x21/0x34
 [<c110a654>] driver_probe_device+0x44/0x99
 [<c110a73f>] __driver_attach+0x39/0x5d
 [<c1109e1c>] bus_for_each_dev+0x35/0x5a
 [<c110a777>] driver_attach+0x14/0x16
 [<c110a220>] bus_add_driver+0x5c/0x8f
 [<c110ab22>] driver_register+0x73/0x78
 [<c10c1f6d>] __pci_register_driver+0x5f/0x71
 [<c13bf935>] cciss_init+0x1a/0x1c
 [<c13aa718>] do_initcalls+0x4c/0x96
 [<c13aa77e>] do_basic_setup+0x1c/0x1e
 [<c10002b1>] init+0x35/0x118
 [<c1000cf5>] kernel_thread_helper+0x5/0xb
Code: 04 b5 e0 de 40 c1 8d 50 04 8b 40 34 e8 3f b7 f9 ff 8b 04 b5 e0 de
40 c1 e8 aa f3 ff ff 89 f0 e8 e8 fa ff ff 8b 04 b5 e0 de 40 c1 <c7> 80
70 03 00 00 00 00 00 00 83 c8 ff 8d 65 f4 5b 5e 5f 5d c3
 <0>Kernel panic - not syncing: Attempted to kill init!

Signed-off-by: Patrick McHardy <kaber@trash.net>
Cc: <mike.miller@hp.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 07:38:03 -08:00