Commit graph

50 commits

Author SHA1 Message Date
Linus Torvalds
f0d15c96d4 Merge git://git.infradead.org/battery-2.6
* git://git.infradead.org/battery-2.6:
  gpio-charger: Fix checking return value of request_any_context_irq
  power_supply: MAX17042: Support additional properties
  max8903_charger: Allow platform data to be __initdata
  power_supply: Add charger driver for MAX8998/LP3974
  power_supply: Add charger driver for MAX8997/8966
  max17042_battery: Remove obsolete cleanup for clientdata
  twl4030_charger: Fix warnings
  wm831x_power: Support multiple instances
  wm831x_backup: Support multiple instances
  apm_power: Fix style error in macros
  s3c_adc_battery: Fix annotation for s3c_adc_battery_probe()
  bq20z75: Enable detection after registering
  bq20z75: Add support for external notification
2011-07-31 06:24:50 -10:00
Donggeun Kim
bb4ce97087 power_supply: Add charger driver for MAX8998/LP3974
This patch supports power supply APIs for MAX8998/LP3974.

Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: KyungMin Park <kyungmin.park@samsung.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-07-08 16:59:34 +04:00
Donggeun Kim
149c077b4b power_supply: Add charger driver for MAX8997/8966
MAX8997/8966 chip is a multi-function device which includes
PMIC, RTC, Fuel Gauge, MUIC, Haptic, Flash control, and
Battery charging control.
The driver for it is located at drivers/mfd.

This patch supports battery charging control of MAX8997/8966 chip and
provides power supply class information to userspace.

Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: KyungMin Park <kyungmin.park@samsung.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-07-08 16:58:59 +04:00
Linus Torvalds
ea0ca3a843 Merge git://git.infradead.org/battery-2.6
* git://git.infradead.org/battery-2.6:
  PXA: Use dev_pm_ops in z2_battery
  ds2760_battery: Fix rated capacity of the hx4700 1800mAh battery
  ds2760_battery: Fix indexing of the 4 active full EEPROM registers
  power: Make test_power driver more dynamic.
  bq27x00_battery: Name of cycle count property
  max8903_charger: Add GENERIC_HARDIRQS as a dependency (fixes S390 build)
  ARM: RX-51: Enable isp1704 power on/off
  isp1704_charger: Allow board specific powering routine
  gpio-charger: Add gpio_charger_resume
  power_supply: Add driver for MAX8903 charger
2011-05-27 10:12:35 -07:00
Clifton Barnes
275ac74629 w1: add Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC support
Add support for the Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC.

It was suggested to combine this functionality with the current ds2782
driver.  Unfortunately, I'm unable to commit the time to refactoring this
driver to that extent and I don't have a platform with the ds2782 part to
validate that there are no regression issues by adding this functionality.

[akpm@linux-foundation.org: use min_t()]
Signed-off-by: Clifton Barnes <cabarnes@indesign-llc.com>
Tested-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26 17:12:38 -07:00
Anton Vorontsov
6f9efe76cb max8903_charger: Add GENERIC_HARDIRQS as a dependency (fixes S390 build)
S390 is special as it doesn't have IRQ lines, so these errors pop up:

drivers/built-in.o: In function 'max8903_remove':
drivers/power/max8903_charger.c:355: undefined reference to 'free_irq'
drivers/power/max8903_charger.c:357: undefined reference to 'free_irq'
drivers/power/max8903_charger.c:359: undefined reference to 'free_irq'

This commit fixes the issue by making the driver depend on
GENERIC_HARDIRQS feature.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-04-22 03:17:11 +04:00
MyungJoo Ham
b14a9ccc1d power_supply: Add driver for MAX8903 charger
MAX8903 is an integrated battery charger and selector with two
power inputs (USB and AC adapter). This driver enables the charger,
handles interrupts, and provides power-supply-class information to
userland.

Tested on Exynos4 NURI / S5PC210 SLP7 boards.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-04-20 17:48:48 +04:00
Lars-Peter Clausen
7fb7ba588c bq27x00: Add bq27000 support
This patch adds support for the bq27000 battery to the bq27x00 driver.
The bq27000 is similar to the bq27200 except that it uses the HDQ bus
instead of I2C to communicate with the host system.

The driver is implemented as a platform driver. The driver expects to be
provided with a read callback function through its platform data. The read
function is assumed to do the lowlevel HDQ handling and read out the value
of a certain register.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Grazvydas Ignotas <notasas@gmail.com>
2011-02-22 11:02:42 +01:00
MyungJoo Ham
359ab9f5b1 power_supply: Add MAX17042 Fuel Gauge Driver
The MAX17042 is a fuel gauge with an I2C interface for lithium-ion
betteries. Unlike its predecessor MAX17040, MAX17042 uses 16bit
registers. Besides, MAX17042 has much more features than MAX17040; e.g.,
a thermistor, current and current accumulation measurement, battery
internal resistance estimate, average values of measurement, and others.

This patch implements a driver for MAX17042.
In this initial release, we have implemented the most basic features of
a fuel gauge: measure the battery capacity and voltage.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-01-14 18:11:59 +03:00
Lars-Peter Clausen
5070437cd9 power_supply: Add gpio charger driver
This patch adds a simple driver for chargers indicating their online
status through a GPIO pin.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-11-18 16:56:17 +03:00
Samuel Ortiz
0f48285755 power: Revert "power_supply: Mark twl4030_charger as broken"
The missing definitions are now in.

This reverts commit 23886839a7.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29 00:30:44 +02:00
Anton Vorontsov
23886839a7 power_supply: Mark twl4030_charger as broken
The driver is not buildable without MFD changes. For now, let's
disable the driver as it breaks build for major platforms (i.e. x86).

  CC [M]  drivers/power/twl4030_charger.o
drivers/power/twl4030_charger.c: In function 'twl4030_clear_set_boot_bci':
drivers/power/twl4030_charger.c:105: error: 'TWL4030_PM_MASTER_BOOT_BCI' undeclared (first use in this function)
drivers/power/twl4030_charger.c:105: error: (Each undeclared identifier is reported only once
drivers/power/twl4030_charger.c:105: error: for each function it appears in.)
drivers/power/twl4030_charger.c: In function 'twl4030_bci_have_vbus':
drivers/power/twl4030_charger.c:137: error: 'TWL4030_PM_MASTER_STS_HW_CONDITIONS' undeclared (first use in this function)
drivers/power/twl4030_charger.c: In function 'twl4030_bci_probe':
drivers/power/twl4030_charger.c:477: warning: overflow in implicit constant conversion
drivers/power/twl4030_charger.c:485: warning: overflow in implicit constant conversion
make[2]: *** [drivers/power/twl4030_charger.o] Error 1

We can re-enable it if MFD tree will finally merge into 2.6.37.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-10-28 12:59:52 +04:00
Grazvydas Ignotas
2e727f1787 power_supply: Add driver for TWL4030/TPS65950 BCI charger
TWL4030/TPS65950 is a multi-function device with integrated charger,
which allows charging from AC or USB. This driver enables the charger
and provides several monitoring functions.

Tested on OMAP3 Pandora board.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-09-30 19:28:09 +04:00
Martin Schwidefsky
f6127b8645 ds2760_battery: Fix W1 and W1_SLAVE_DS2760 dependency
Fix this Kconfig warning on allmodconfig for s390:

warning: (BATTERY_DS2760 && POWER_SUPPLY) selects W1 which has unmet
direct dependencies (HAS_IOMEM)

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-09-23 17:33:28 +04:00
Rhyland Klein
a7640bfa10 power_supply: Add driver for TI BQ20Z75 gas gauge IC
This driver depends on I2C and uses SMBUS for communication with
the host.

Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-09-06 11:35:39 +04:00
Heikki Krogerus
ec46475f3e power_supply: Add isp1704 charger detection driver
NXP ISP1704 is Battery Charging Specification 1.0 compliant USB
transceiver. This adds a power supply driver for ISP1704 and
ISP1707 USB transceivers.

Signed-off-by: Heikki Krogerus <ext-heikki.krogerus@nokia.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-08-19 16:25:20 +04:00
Linus Torvalds
16bb85bc12 Merge git://git.infradead.org/battery-2.6
* git://git.infradead.org/battery-2.6:
  intel_mid_battery: Fix battery scaling
  intel_mid_battery: Fix the argument order to intel_scu_ipc_command
  olpc_battery: Fix build failure caused by sysfs changes
  Add s3c-adc-battery driver
  Intel MID platform battery driver

Fix up trivial conflicts (battery drivers added from different branches)
in drivers/power/{Kconfig,Makefile}
2010-08-12 09:58:33 -07:00
Lars-Peter Clausen
f6a21388bd POWER: Add JZ4740 battery driver.
Add support for the battery voltage measurement part of the JZ4740 ADC unit.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1416/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05 13:26:20 +01:00
Vasily Khoruzhick
808be4b22f Add s3c-adc-battery driver
s3c-adc-battery is driver for monitoring and charging battery on
iPAQ H1930/H1940/RX1950.

It depends on s3c-adc driver to get battery voltage and current.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-07-23 17:08:41 +04:00
Nithish Mahalingam
6721081b6b Intel MID platform battery driver
The PMIC Battery driver provides battery charging and battery gauge
functionality on Intel MID platforms. This provides the basic functions.
There are some USB drivers to merge before the selection of charging
between the different USB power levels can be enabled.

Moved to a platform device by Alek Du.

Signed-off-by: Nithish Mahalingam <nithish.mahalingam@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-06-17 21:52:25 +04:00
Anton Vorontsov
a1e50fd445 power_supply: Add test_power driver
Just a handy driver that is used for testing purposes.

Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-05-18 19:58:56 +04:00
Yulia Vilensky
9b9ade6b61 ds2782_battery: Add support for ds2786 battery gas gauge
Signed-off-by: Yulia Vilensky <vilensky@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-04-26 22:03:42 +04:00
Marek Vasut
e3e8d1c93f Driver for Zipit Z2 battery chip
This patch adds driver for Zipit Z2 battery chip called AER915. No
details are known about the chip. The chip is available through I2C bus
at address 0x55 and it's register 0x02 contains battery voltage.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-04-06 20:35:58 +04:00
Haojian Zhuang
28db38888b power_supply: Enable power supply of max8925
MAX8925 is a PMIC that contains charger component

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:17:17 +01:00
Grazvydas Ignotas
e20908d95e power_supply: bq27x00: add BQ27500 support
BQ27500 is newer fuel gauge chip from TI with slightly changed
register layout and some different register semantics. Add new i2c
ID for it and handle differences where needed. Also rename bq27200
functions to bq27x00, as they are no longer bq27200 specific.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-02-16 21:26:52 +03:00
Linus Torvalds
48e902f0a3 Merge git://git.infradead.org/battery-2.6
* git://git.infradead.org/battery-2.6:
  power_supply_sysfs: Handle -ENODATA in a special way
  wm831x_backup: Remove unused variables
  gta02: Set pcf50633 charger_reference_current_ma
  pcf50633: Query charger status directly
  pcf50633: Properly reenable charging when the supply conditions change
  pcf50633: Get rid of charging restart software auto-triggering
  pcf50633: introduces battery charging current control
  pcf50633: Add ac power supply class to the charger
  wm831x: Factor out WM831x backup battery charger
2009-12-15 08:59:33 -08:00
Thomas Kunze
f1fce597e6 collie: add battery driver
This driver is based on tosa_battery.c.
2009-11-27 21:07:23 +01:00
Mark Brown
c26964ead5 wm831x: Factor out WM831x backup battery charger
The backup battery on WM831x is a separate IP block to the main PMU
and is largely unrelated to the main supply functionality. Factor it
out into a separate driver in order to reflect this and better support
future hardware versions.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-11-16 03:27:30 +03:00
Mark Brown
3961f7c3cf power_supply: Add driver for the PMU on WM831x PMICs
The WM831x PMICs provide power path management from three sources:
a wall supply, USB and a battery with integrated charger. They also
provide an additional backup supply with integrated for maintaining
always on functionality such as the RTC and monitoring of power
switches.

After some initial configuration at startup the device operates
autonomously, the driver simply provides reporting of the current
state.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2009-09-04 21:02:32 +04:00
Ryan Mallon
bfdb46ce84 Add ds2782 battery gas gauge driver
This patch adds a driver for ds2782 battery devices.

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-07-01 02:36:58 +04:00
Minkyu Kang
c6f4a42de6 Add MAX17040 Fuel Gauge driver
The MAX17040 is a I2C interfaced Fuel Gauge systems for lithium-ion
batteries This patch adds support the MAX17040 Fuel Gauge

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-06-09 00:53:21 +04:00
Balaji Rao
f5714dc97d power_supply: PCF50633 battery charger driver
Signed-off-by: Balaji Rao <balajirrao@openmoko.org>
Cc: Andy Green <andy@openmoko.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-11 01:34:24 +01:00
Mike Rapoport
342d765e01 power_supply: Add Dialog DA9030 battery charger driver
Driver for battery charger integrated into Dialog Semiconductor DA9030 PMIC

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:41 +01:00
Mark Brown
14431aa0c5 power_supply: Add support for WM8350 PMU
This patch adds support for the PMU provided by the WM8350 which
implements battery, line and USB supplies including a battery charger.
The hardware functions largely autonomously, with minimal software
control required to initiate fast charging.

Support for configuration of the USB supply is not yet implemented.
This means that the hardware will remain in the mode configured at
startup, by default limiting the current drawn from USB to 100mA.

This driver was originally written by Liam Girdwood with subsequent
updates for submission by Mark Brown.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:38 +01:00
Anton Vorontsov
ed8c3174dd Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	drivers/power/Makefile
2008-10-18 20:28:24 +04:00
Linus Torvalds
5e4c5f4c64 Fix Kconfig dependency for WM97xx battery driver
It needs the WM97xx touchscreen driver to be compiled in, not as a
module.  And it cannot itself be a module, due to some unfortunate
interactions with platform data.

Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-12 12:37:16 -07:00
Marek Vašut
4e9687d9c8 [ARM] 5248/1: wm97xx generic battery driver
This patch adds generic battery driver for wm97xx chips.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-02 22:48:34 +01:00
Dmitry Baryshkov
6a9037887c power_supply: fix dependency of tosa_battery
tosa_battery should also depend on wm97xx_ts as it uses dac-accessing
functions from that module.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2008-09-26 03:44:13 +04:00
Rodolfo Giometti
b996ad0e9f power_supply: Support for Texas Instruments BQ27200 battery managers
These battery managers came in two different packages: one for I2C
busses (BQ27200) and one for HDQ busses (BQ27000).

This driver currently supports only the I2C chip version but the code
is designed in order to easily allow the HDQ chip version integration.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: make things static, use kasprintf()]
Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2008-09-01 02:46:12 +04:00
Anton Vorontsov
9fec6060d9 Merge branch 'master' of /home/cbou/linux-2.6
Conflicts:

	drivers/power/Kconfig
	drivers/power/Makefile
2008-07-30 02:05:23 +04:00
Marek Vašut
d4b19c42ca [ARM] 5155/1: PalmTX battery monitor
This patch adds battery monitoring driver for PalmTX.
It can read voltage from the battery and temperature.
It also monitors charging/discharging status.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-10 12:15:32 +01:00
Dmitry Baryshkov
fece418418 power_supply: Sharp SL-6000 (tosa) batteries support
This patch adds common battery interface support for Sharp SL-6000 (tosa).

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2008-07-01 02:43:12 +04:00
Paul Mackerras
a1da5f4f1b Don't compile the PMU power driver on 64-bit PowerPC
As reported by Stephen Rothwell, an allmodconfig build on 64-bit
PowerPC reports these errors:

ERROR: "pmu_batteries" [drivers/power/pmu_battery.ko] undefined!
ERROR: "pmu_battery_count" [drivers/power/pmu_battery.ko] undefined!
ERROR: "pmu_power_flags" [drivers/power/pmu_battery.ko] undefined!

This fixes the problem by not building pmu_battery.ko on ppc64.  There
are no battery-powered ppc64 machines with an Apple PMU, and we can be
reasonably confident there never will be.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-07-23 12:42:45 +01:00
Al Viro
5f17c70fe6 PDA_POWER depends on having request_irq()
... so all proud owners of s390-based PDAs will have to live without that one

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 16:40:51 -07:00
David Woodhouse
fb972873a7 [BATTERY] One Laptop Per Child power/battery driver
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Anton Vorontsov <cbou@mail.ru>
2007-07-10 11:28:22 +01:00
David Woodhouse
efea58e397 [BATTERY] Apple PMU driver
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Anton Vorontsov <cbou@mail.ru>
2007-07-10 11:28:12 +01:00
Anton Vorontsov
fe0e3153ac [BATTERY] 1-Wire ds2760 chip battery driver
This is driver for batteries with ds2760 chip inside, found inside
almost every HP iPaq and HTC PDAs/phones.

Signed-off-by: Anton Vorontsov <cbou@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-07-10 11:26:18 +01:00
Anton Vorontsov
3788ec932b [BATTERY] APM emulation driver for class batteries
Signed-off-by: Eugeny Boger <eugenyboger@dgap.mipt.ru>
Signed-off-by: Anton Vorontsov <cbou@mail.ru>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-07-10 11:26:08 +01:00
Anton Vorontsov
b2998049cf [BATTERY] pda_power platform driver
Common power driver for PDAs and phones with one or two external
power supplies (AC/USB) connected to main and backup batteries,
and optional builtin charger.

It's used to stop logic duplication through different embedded
devices. So, power supply *logic* is here. pda_power register
power supplies, and will take care about notifying batteries
about power changes through external power interface.

Currently, power consumption legal limits (including USB power
consumption) should be handled by platform code, inside set_charge
function.

Signed-off-by: Anton Vorontsov <cbou@mail.ru>
Signed-off-by: Roman Moravcik <roman.moravcik@gmail.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-07-10 11:25:59 +01:00
Anton Vorontsov
4a11b59d82 [BATTERY] Universal power supply class (was: battery class)
This class is result of "external power" and "battery" classes merge,
as suggested by David Woodhouse. He also implemented uevent support.

Here how userspace seeing it now:

    	# ls /sys/class/power\ supply/
    	ac  main-battery  usb

    	# cat /sys/class/power\ supply/ac/type
    	AC

    	# cat /sys/class/power\ supply/usb/type
    	USB

    	# cat /sys/class/power\ supply/main-battery/type
    	Battery

    	# cat /sys/class/power\ supply/ac/online
    	1

    	# cat /sys/class/power\ supply/usb/online
    	0

    	# cat /sys/class/power\ supply/main-battery/status
    	Charging

    	# cat /sys/class/leds/h5400\:red-left/trigger
    	none h5400-radio timer hwtimer ac-online usb-online
    	main-battery-charging-or-full [main-battery-charging]
    	main-battery-full

Signed-off-by: Anton Vorontsov <cbou@mail.ru>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-07-10 11:25:44 +01:00