Commit graph

300 commits

Author SHA1 Message Date
Yinghai Lu
28be225b23 irq: slab alloc for default irq_affinity
Ingo had

[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at mm/bootmem.c:537 alloc_arch_preferred_bootmem+0x2b/0x71()
[    0.000000] Hardware name: System Product Name
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.30-tip-03087-g0bb2618-dirty #52506
[    0.000000] Call Trace:
[    0.000000]  [<81032588>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<810325c5>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<819d1bc0>] alloc_arch_preferred_bootmem+0x2b/0x71
[    0.000000]  [<819d1c31>] ___alloc_bootmem_nopanic+0x2b/0x9a
[    0.000000]  [<81050a0a>] ? lock_release+0xac/0xb2
[    0.000000]  [<819d1d4c>] ___alloc_bootmem+0xe/0x2d
[    0.000000]  [<819d1e9f>] __alloc_bootmem+0xa/0xc
[    0.000000]  [<819d7c63>] alloc_bootmem_cpumask_var+0x21/0x26
[    0.000000]  [<819d0cc8>] early_irq_init+0x15/0x10d
[    0.000000]  [<819bb75a>] start_kernel+0x167/0x326
[    0.000000]  [<819bb06b>] __init_begin+0x6b/0x70
[    0.000000] ---[ end trace 4eaa2a86a8e2da23 ]---
[    0.000000] NR_IRQS:2304 nr_irqs:424
[    0.000000] CPU 0 irqstacks, hard=821e6000 soft=821e7000

we need to update init_irq_default_affinity

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-06-12 13:50:23 +03:00
Pekka Enberg
22fb4e71e6 irq: use kcalloc() instead of the bootmem allocator
Fixes the following problem:

[    0.000000] Experimental hierarchical RCU init done.
[    0.000000] NR_IRQS:4352 nr_irqs:256
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at mm/bootmem.c:537 alloc_arch_preferred_bootmem+0x40/0x7e()
[    0.000000] Hardware name: To Be Filled By O.E.M.
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.30-tip-02161-g7a74539-dirty #59709
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff823f8c8e>] ? alloc_arch_preferred_bootmem+0x40/0x7e
[    0.000000]  [<ffffffff81067168>] warn_slowpath_common+0x88/0xcb
[    0.000000]  [<ffffffff810671d2>] warn_slowpath_null+0x27/0x3d
[    0.000000]  [<ffffffff823f8c8e>] alloc_arch_preferred_bootmem+0x40/0x7e
[    0.000000]  [<ffffffff823f9307>] ___alloc_bootmem_nopanic+0x4e/0xec
[    0.000000]  [<ffffffff823f93c5>] ___alloc_bootmem+0x20/0x61
[    0.000000]  [<ffffffff823f962e>] __alloc_bootmem+0x1e/0x34
[    0.000000]  [<ffffffff823f757c>] early_irq_init+0x6d/0x118
[    0.000000]  [<ffffffff823e0140>] ? early_idt_handler+0x0/0x71
[    0.000000]  [<ffffffff823e0cf7>] start_kernel+0x192/0x394
[    0.000000]  [<ffffffff823e0140>] ? early_idt_handler+0x0/0x71
[    0.000000]  [<ffffffff823e02ad>] x86_64_start_reservations+0xb4/0xcf
[    0.000000]  [<ffffffff823e0000>] ? __init_begin+0x0/0x140
[    0.000000]  [<ffffffff823e0420>] x86_64_start_kernel+0x158/0x17b
[    0.000000] ---[ end trace a7919e7f17c0a725 ]---
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2002.510 MHz processor.
[    0.004000] Console: colour VGA+ 80x25

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-06-11 19:27:13 +03:00
Yinghai Lu
dad213aeb5 irq/cpumask: make memoryless node zero happy
Don't hardcode to node zero for early boot IRQ setup memory allocations.

[ penberg@cs.helsinki.fi: minor cleanups ]
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-06-11 19:27:08 +03:00
Linus Torvalds
8623661180 Merge branch 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (244 commits)
  Revert "x86, bts: reenable ptrace branch trace support"
  tracing: do not translate event helper macros in print format
  ftrace/documentation: fix typo in function grapher name
  tracing/events: convert block trace points to TRACE_EVENT(), fix !CONFIG_BLOCK
  tracing: add protection around module events unload
  tracing: add trace_seq_vprint interface
  tracing: fix the block trace points print size
  tracing/events: convert block trace points to TRACE_EVENT()
  ring-buffer: fix ret in rb_add_time_stamp
  ring-buffer: pass in lockdep class key for reader_lock
  tracing: add annotation to what type of stack trace is recorded
  tracing: fix multiple use of __print_flags and __print_symbolic
  tracing/events: fix output format of user stack
  tracing/events: fix output format of kernel stack
  tracing/trace_stack: fix the number of entries in the header
  ring-buffer: discard timestamps that are at the start of the buffer
  ring-buffer: try to discard unneeded timestamps
  ring-buffer: fix bug in ring_buffer_discard_commit
  ftrace: do not profile functions when disabled
  tracing: make trace pipe recognize latency format flag
  ...
2009-06-10 19:53:40 -07:00
Paul Mundt
948cd52906 sparseirq: Allow early irq_desc allocation
Presently non-legacy IRQs have their irq_desc allocated with
kzalloc_node(). This assumes that all callers of irq_to_desc_node_alloc()
will be sufficiently late in the boot process that kmalloc is available.

While porting sparseirq support to sh this blew up immediately, as at the
time that we register the CPU's interrupt vector map only bootmem is
available. Check slab_is_available() to work out which path to use.

[ Impact: fix SH early boot crash with sparseirq enabled ]

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mel Gorman <mel@csn.ul.ie>
LKML-Reference: <20090522014008.GA2806@linux-sh.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-23 14:55:24 +02:00
Ingo Molnar
6cda3eb62e Merge branch 'x86/apic' into irq/numa
Merge reason: both topics modify the APIC code but were able to do it in
              parallel so far. An upcoming patch generates a conflict so
              merge them to avoid the conflict.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-12 12:17:36 +02:00
Ingo Molnar
44347d947f Merge branch 'linus' into tracing/core
Merge reason: tracing/core was on a .30-rc1 base and was missing out on
              on a handful of tracing fixes present in .30-rc5-almost.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-07 11:17:34 +02:00
Yinghai Lu
15e957d08d x86/irq: use move_irq_desc() in create_irq_nr()
move_irq_desc() will try to move irq_desc to the home node if
the allocated one is not correct, in create_irq_nr().

( This can happen on devices that are on different nodes that
  are using MSI, when drivers are loaded and unloaded randomly. )

v2: fix non-smp build
v3: add NUMA_IRQ_DESC to eliminate #ifdefs

[ Impact: improve irq descriptor locality on NUMA systems ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <49F95EAE.2050903@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-01 19:01:12 +02:00
Thomas Gleixner
d7226fb6ec Revert "genirq: assert that irq handlers are indeed running in hardirq context"
This reverts commit 044d408409.

The commit added a warning when handle_IRQ_event() is called outside
of hard interrupt context. This breaks the generic tasklet based
interrupt resend mechanism which is used when the hardware has no way
to retrigger the interrupt. So we get a warning for a use case which
is correct and worked for years. Remove it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-01 15:16:04 +02:00
Heiko Carstens
a0e39ed378 tracing: fix build failure on s390
"tracing: create automated trace defines" causes this compile error on s390,
as reported by Sachin Sant against linux-next:

 kernel/built-in.o: In function `__do_softirq':
 (.text+0x1c680): undefined reference to `__tracepoint_softirq_entry'

This happens because the definitions of the softirq tracepoints were moved
from kernel/softirq.c to kernel/irq/handle.c. Since s390 doesn't support
generic hardirqs handle.c doesn't get compiled and the definitions are
missing.

So move the tracepoints to softirq.c again.

[ Impact: fix build failure on s390 ]

Reported-by: Sachin Sant <sachinp@in.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: fweisbec@gmail.com
LKML-Reference: <20090429135139.5fac79b8@osiris.boeblingen.de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29 14:06:21 +02:00
Yinghai Lu
85ac16d033 x86/irq: change irq_desc_alloc() to take node instead of cpu
This simplifies the node awareness of the code. All our allocators
only deal with a NUMA node ID locality not with CPU ids anyway - so
there's no need to maintain (and transform) a CPU id all across the
IRq layer.

v2: keep move_irq_desc related

[ Impact: cleanup, prepare IRQ code to be NUMA-aware ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
LKML-Reference: <49F65536.2020300@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 12:21:17 +02:00
Yinghai Lu
57b150cce8 irq: only update affinity if ->set_affinity() is sucessfull
irq_set_affinity() and move_masked_irq() try to assign affinity
before calling chip set_affinity(). Some archs are assigning it
in ->set_affinity() again.

We do something like:

 cpumask_cpy(desc->affinity, mask);
 desc->chip->set_affinity(mask);

But in the failure path, affinity should not be touched - otherwise
we'll end up with a different affinity mask despite the failure to
migrate the IRQ.

So try to update the afffinity only if set_affinity returns with 0.
Also call irq_set_thread_affinity accordingly.

v2: update after "irq, x86: Remove IRQ_DISABLED check in process context IRQ move"
v3: according to Ingo, change set_affinity() in irq_chip should return int.
v4: update comments by removing moving irq_desc code.

[ Impact: fix /proc/irq/*/smp_affinity setting corner case bug ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <49F65509.60307@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 12:21:16 +02:00
Yinghai Lu
fcef5911c7 x86/irq: remove leftover code from NUMA_MIGRATE_IRQ_DESC
The original feature of migrating irq_desc dynamic was too fragile
and was causing problems: it caused crashes on systems with lots of
cards with MSI-X when user-space irq-balancer was enabled.

We now have new patches that create irq_desc according to device
numa node. This patch removes the leftover bits of the dynamic balancer.

[ Impact: remove dead code ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <49F654AF.8000808@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 12:21:15 +02:00
Yinghai Lu
9ec4fa271f irq, cpumask: correct CPUMASKS_OFFSTACK typo and fix fallout
CPUMASKS_OFFSTACK is not defined anywhere (it is CPUMASK_OFFSTACK).
It is a typo and init_allocate_desc_masks() is called before it set
affinity to all cpus...

Split init_alloc_desc_masks() into all_desc_masks() and init_desc_masks().

Also use CPUMASK_OFFSTACK in alloc_desc_masks().

[ Impact: fix smp_affinity copying/setup when moving irq_desc between CPUs ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
LKML-Reference: <49F6546E.3040406@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 12:21:14 +02:00
Steven Rostedt
ad8d75fff8 tracing/events: move trace point headers into include/trace/events
Impact: clean up

Create a sub directory in include/trace called events to keep the
trace point headers in their own separate directory. Only headers that
declare trace points should be defined in this directory.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-14 22:05:43 -04:00
Steven Rostedt
a8d154b009 tracing: create automated trace defines
This patch lowers the number of places a developer must modify to add
new tracepoints. The current method to add a new tracepoint
into an existing system is to write the trace point macro in the
trace header with one of the macros TRACE_EVENT, TRACE_FORMAT or
DECLARE_TRACE, then they must add the same named item into the C file
with the macro DEFINE_TRACE(name) and then add the trace point.

This change cuts out the needing to add the DEFINE_TRACE(name).
Every file that uses the tracepoint must still include the trace/<type>.h
file, but the one C file must also add a define before the including
of that file.

 #define CREATE_TRACE_POINTS
 #include <trace/mytrace.h>

This will cause the trace/mytrace.h file to also produce the C code
necessary to implement the trace point.

Note, if more than one trace/<type>.h is used to create the C code
it is best to list them all together.

 #define CREATE_TRACE_POINTS
 #include <trace/foo.h>
 #include <trace/bar.h>
 #include <trace/fido.h>

Thanks to Mathieu Desnoyers and Christoph Hellwig for coming up with
the cleaner solution of the define above the includes over my first
design to have the C code include a "special" header.

This patch converts sched, irq and lockdep and skb to use this new
method.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-14 12:57:28 -04:00
Pallipadi, Venkatesh
6ec3cfeca0 x86, irq: Remove IRQ_DISABLED check in process context IRQ move
As discussed in the thread here:

  http://marc.info/?l=linux-kernel&m=123964468521142&w=2

Eric W. Biederman observed:

> It looks like some additional bugs have slipped in since last I looked.
>
> set_irq_affinity does this:
> ifdef CONFIG_GENERIC_PENDING_IRQ
>        if (desc->status & IRQ_MOVE_PCNTXT || desc->status & IRQ_DISABLED) {
>                cpumask_copy(desc->affinity, cpumask);
>                desc->chip->set_affinity(irq, cpumask);
>        } else {
>                desc->status |= IRQ_MOVE_PENDING;
>                cpumask_copy(desc->pending_mask, cpumask);
>        }
> #else
>
> That IRQ_DISABLED case is a software state and as such it has nothing to
> do with how safe it is to move an irq in process context.

[...]

>
> The only reason we migrate MSIs in interrupt context today is that there
> wasn't infrastructure for support migration both in interrupt context
> and outside of it.

Yes. The idea here was to force the MSI migration to happen in process
context. One of the patches in the series did

        disable_irq(dev->irq);
        irq_set_affinity(dev->irq, cpumask_of(dev->cpu));
        enable_irq(dev->irq);

with the above patch adding irq/manage code check for interrupt disabled
and moving the interrupt in process context.

IIRC, there was no IRQ_MOVE_PCNTXT when we were developing this HPET
code and we ended up having this ugly hack. IRQ_MOVE_PCNTXT was there
when we eventually submitted the patch upstream. But, looks like I did a
blind rebasing instead of using IRQ_MOVE_PCNTXT in hpet MSI code.

Below patch fixes this. i.e., revert commit 932775a4ab
and add PCNTXT to HPET MSI setup. Also removes copying of desc->affinity
in generic code as set_affinity routines are doing it internally.

Reported-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "Li Shaohua" <shaohua.li@intel.com>
Cc: Gary Hade <garyhade@us.ibm.com>
Cc: "lcm@us.ibm.com" <lcm@us.ibm.com>
Cc: suresh.b.siddha@intel.com
LKML-Reference: <20090413222058.GB8211@linux-os.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-14 15:21:13 +02:00
Linus Torvalds
422a253483 Merge branches 'core-fixes-for-linus', 'irq-fixes-for-linus' and 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  printk: fix wrong format string iter for printk
  futex: comment requeue key reference semantics

* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  irq: fix cpumask memory leak on offstack cpumask kernels

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  posix-timers: fix RLIMIT_CPU && setitimer(CPUCLOCK_PROF)
  posix-timers: fix RLIMIT_CPU && fork()
  timers: add missing kernel-doc
2009-04-09 10:35:30 -07:00
Ingo Molnar
9efe21cb82 Merge branch 'linus' into irq/threaded
Conflicts:
	include/linux/irq.h
	kernel/irq/handle.c
2009-04-06 01:41:22 +02:00
Yinghai Lu
9756b15e1b irq: fix cpumask memory leak on offstack cpumask kernels
Need to free the old cpumask for affinity and pending_mask.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <49D18FF0.50707@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-03 19:14:44 +02:00
Ingo Molnar
8302294f43 Merge branch 'tracing/core-v2' into tracing-for-linus
Conflicts:
	include/linux/slub_def.h
	lib/Kconfig.debug
	mm/slob.c
	mm/slub.c
2009-04-02 00:49:02 +02:00
Rafael J. Wysocki
0a0c5168df PM: Introduce functions for suspending and resuming device interrupts
Introduce helper functions allowing us to prevent device drivers from
getting any interrupts (without disabling interrupts on the CPU)
during suspend (or hibernation) and to make them start to receive
interrupts again during the subsequent resume.  These functions make it
possible to keep timer interrupts enabled while the "late" suspend and
"early" resume callbacks provided by device drivers are being
executed.  In turn, this allows device drivers' "late" suspend and
"early" resume callbacks to sleep, execute ACPI callbacks etc.

The functions introduced here will be used to rework the handling of
interrupts during suspend (hibernation) and resume.  Namely,
interrupts will only be disabled on the CPU right before suspending
sysdevs, while device drivers will be prevented from receiving
interrupts, with the help of the new helper function, before their
"late" suspend callbacks run (and analogously during resume).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Ingo Molnar <mingo@elte.hu>
2009-03-30 21:46:54 +02:00
Ingo Molnar
6e15cf0486 Merge branch 'core/percpu' into percpu-cpumask-x86-for-linus-2
Conflicts:
	arch/parisc/kernel/irq.c
	arch/x86/include/asm/fixmap_64.h
	arch/x86/include/asm/setup.h
	kernel/irq/handle.c

Semantic merge:
        arch/x86/include/asm/fixmap.h

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-27 17:28:43 +01:00
Thomas Gleixner
f48fe81e5b genirq: threaded irq handlers review fixups
Delta patch to address the review comments.

      - Implement warning when IRQ_WAKE_THREAD is requested and no
        thread handler installed
      - coding style fixes

Pointed-out-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-03-24 12:15:23 +01:00
Arjan van de Ven
935bd5b971 genirq: add support for threaded interrupts to devres
Some devices use devres_request_irq() for to install their interrupt
handler. Add support for threaded interrupts to devres as well.

[tglx - simplified and adapted to latest threadirq version]

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-03-24 12:15:23 +01:00
Thomas Gleixner
3aa551c9b4 genirq: add threaded interrupt handler support
Add support for threaded interrupt handlers:

A device driver can request that its main interrupt handler runs in a
thread. To achive this the device driver requests the interrupt with
request_threaded_irq() and provides additionally to the handler a
thread function. The handler function is called in hard interrupt
context and needs to check whether the interrupt originated from the
device. If the interrupt originated from the device then the handler
can either return IRQ_HANDLED or IRQ_WAKE_THREAD. IRQ_HANDLED is
returned when no further action is required. IRQ_WAKE_THREAD causes
the genirq code to invoke the threaded (main) handler. When
IRQ_WAKE_THREAD is returned handler must have disabled the interrupt
on the device level. This is mandatory for shared interrupt handlers,
but we need to do it as well for obscure x86 hardware where disabling
an interrupt on the IO_APIC level redirects the interrupt to the
legacy PIC interrupt lines.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
2009-03-24 12:15:23 +01:00
Thomas Gleixner
80c5520811 Merge branch 'cpus4096' into irq/threaded
Conflicts:
	arch/parisc/kernel/irq.c
	kernel/irq/handle.c

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-03-23 21:20:20 +01:00
Ingo Molnar
edb35028e4 Merge branches 'irq/genirq' and 'linus' into irq/core 2009-03-16 09:20:13 +01:00
Thomas Gleixner
0e57aa11ab genirq: deprecate __do_IRQ
Two years migration time is enough. Remove the compability cruft.

Add the deprecated warning in kernel/irq/handle.c because marking
__do_IRQ itself is way too noisy.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-03-13 16:34:02 +01:00
Thomas Gleixner
4553573277 genirq: use kzalloc instead of explicit zero initialization
Impact: simplification

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2009-03-13 14:32:29 +01:00
Thomas Gleixner
c8e2aeef0b genirq: remove redundant if condition
Impact: cleanup

The code is only compiled if CONFIG_GENERIC_HARDIRQS=y so another
check for this define in the code is redundant. Remove it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-03-13 14:32:28 +01:00
Magnus Damm
eb53b4e8fe irq: export remove_irq() and setup_irq() symbols
Export the setup_irq() and remove_irq() symbols.

I'd like to export these functions since I have timer
code that needs to use setup_irq() early on (too early
for request_irq()), and the same code can also be
compiled as a module.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
LKML-Reference: <20090312120559.2926.82371.sendpatchset@rx1.opensource.se>
[ changed to _GPL as these are special APIs deep inside the irq layer. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-12 13:16:33 +01:00
Magnus Damm
cbf94f0682 irq: match remove_irq() args with setup_irq()
Modify remove_irq() to match setup_irq().

Signed-off-by: Magnus Damm <damm@igel.co.jp>
LKML-Reference: <20090312120551.2926.43942.sendpatchset@rx1.opensource.se>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-12 13:16:33 +01:00
Magnus Damm
f21cfb258d irq: add remove_irq() for freeing of setup_irq() irqs
Impact: add new API

This patch adds a remove_irq() function for releasing
interrupts requested with setup_irq().

Without this patch we have no way of releasing such
interrupts since free_irq() today tries to kfree()
the irqaction passed with setup_irq().

Signed-off-by: Magnus Damm <damm@igel.co.jp>
LKML-Reference: <20090312120542.2926.56609.sendpatchset@rx1.opensource.se>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-12 13:16:32 +01:00
Ingo Molnar
f0ef039851 Merge branch 'x86/core' into tracing/textedit
Conflicts:
	arch/x86/Kconfig
	block/blktrace.c
	kernel/irq/handle.c

Semantic conflict:
	kernel/trace/blktrace.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-06 16:45:01 +01:00
Peter Zijlstra
044d408409 genirq: assert that irq handlers are indeed running in hardirq context
Make sure the genirq layer handlers are indeed running handlers
in hardirq context. That is the genirq expectation and doing
anything else is broken.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <1236006812.5330.632.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-03 00:05:45 +01:00
Ingo Molnar
c02368a9d0 Merge branch 'linus' into irq/genirq 2009-03-02 22:08:56 +01:00
Jason Baron
af39241b90 tracing, genirq: add irq enter and exit trace events
Impact: add new tracepoints

Add them to the generic IRQ code, that way every architecture
gets these new tracepoints, not just x86.

Using Steve's new 'TRACE_FORMAT', I can get function graph
trace as follows using the original two IRQ tracepoints:

 3)               |    handle_IRQ_event() {
 3)               |    /* (irq_handler_entry) irq=28 handler=eth0 */
 3)               |    e1000_intr_msi() {
 3)   2.460 us    |      __napi_schedule();
 3)   9.416 us    |    }
 3)               |    /* (irq_handler_exit) irq=28 handler=eth0 return=handled */
 3) + 22.935 us   |  }

Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-26 18:43:50 +01:00
Ingo Molnar
f17c75453b irq: name 'p' variables a bit better
'p' stands for pointer - make it clear in setup_irq() and free_irq()
what kind of pointer it is.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-17 20:44:47 +01:00
Ingo Molnar
8316e38100 irq: further clean up the free_irq() code flow
Linus noticed that the 'pp' variable can be eliminated
altogether, and the loop can be cleaned up further.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-17 20:28:29 +01:00
Ingo Molnar
ae88a23b32 irq: refactor and clean up the free_irq() code flow
Impact: cleanup

- separate out the loop from the actual freeing logic, this wins us
  two indentation levels allowing a number of followup prettifications

- turn the WARN_ON() into a more informative WARN().

- clean up the comments and the code flow some more

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-15 11:36:49 +01:00
Ingo Molnar
327ec5699c irq: clean up manage.c
- make printk message git-greppable
- fix a few style details

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-15 11:21:37 +01:00
Ingo Molnar
8f8573ae9f Merge branches 'irq/genirq', 'irq/sparseirq' and 'irq/urgent' into irq/core 2009-02-13 11:57:18 +01:00
Johannes Weiner
0e43785c57 irq: use GFP_KERNEL for action allocation in request_irq()
request_irq() calls into proc code via __setup_irq() which is not safe
in an atomic context, so request_irq() can itself use the more
reliable GFP_KERNEL allocation for the action descriptor.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-13 10:52:07 +01:00
Ingo Molnar
249d51b53a Merge commit 'v2.6.29-rc4' into core/percpu
Conflicts:
	arch/x86/mach-voyager/voyager_smp.c
	arch/x86/mm/fault.c
2009-02-09 14:58:11 +01:00
Hannes Eder
548c893380 kernel/irq: fix sparse warning: make symbol static
While being at it make every occurrence of 'do_irq_select_affinity'
have the same signature in terms of signedness of the first argument.

Fix this sparse warning:
  kernel/irq/manage.c:112:5: warning: symbol 'do_irq_select_affinity' was not declared. Should it be static?

Also rename do_irq_select_affinity() to setup_affinity() - shorter name
and clearer naming.

Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Acked-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09 10:14:05 +01:00
Yinghai Lu
005bf0e6fa irq: optimize init_kstat_irqs/init_copy_kstat_irqs
Simplify and make init_kstat_irqs etc more type proof, suggested by
Andrew.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09 09:02:34 +01:00
Yinghai Lu
0f3c2a89c1 irq: clear kstat_irqs
Impact: get correct kstat_irqs [/proc/interrupts] for msi/msi-x etc

need to call clear_kstat_irqs(), so when we reuse that irq_desc,
we get correct kstat in /proc/interrupts.

This makes /proc/interrupts not have <NULL> entries.

Don't need to worry about arch that doesn't support genirq, because they
will not call dynamic_irq_cleanup().

v2: simplify and make clear_kstat_irqs more robust

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09 08:55:08 +01:00
Ingo Molnar
9d45cf9e36 Merge branch 'x86/urgent' into x86/apic
Conflicts:
	arch/x86/mach-default/setup.c

Semantic merge:
	arch/x86/kernel/irqinit_32.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-05 22:30:01 +01:00
Ingo Molnar
bb960a1e42 Merge branch 'core/xen' into x86/urgent 2009-02-04 14:54:56 +01:00