Commit graph

49 commits

Author SHA1 Message Date
Sam Ravnborg
caa27b66bd kbuild: use INSTALLKERNEL to select customized installkernel script
Replace the use of CROSS_COMPILE to select a customized
installkernel script with the possibility to set INSTALLKERNEL
to select a custom installkernel script when running make:

    make INSTALLKERNEL=arm-installkernel install

With this patch we are now more consistent across
different architectures - they did not all support use
of CROSS_COMPILE.

The use of CROSS_COMPILE was a hack as this really belongs
to gcc/binutils and the installkernel script does not change
just because we change toolchain.

The use of CROSS_COMPILE caused troubles with an upcoming patch
that saves CROSS_COMPILE when a kernel is built - it would no
longer be installable.
[Thanks to Peter Z. for this hint]

This patch undos what Ian did in commit:

  0f8e2d62fa
  ("use ${CROSS_COMPILE}installkernel in arch/*/boot/install.sh")

The patch has been lightly tested on x86 only - but all changes
looks obvious.

Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Mike Frysinger <vapier@gentoo.org> [blackfin]
Acked-by: Russell King <linux@arm.linux.org.uk> [arm]
Acked-by: Paul Mundt <lethal@linux-sh.org> [sh]
Acked-by: "H. Peter Anvin" <hpa@zytor.com> [x86]
Cc: Ian Campbell <icampbell@arcom.com>
Cc: Tony Luck <tony.luck@intel.com> [ia64]
Cc: Fenghua Yu <fenghua.yu@intel.com> [ia64]
Cc: Hirokazu Takata <takata@linux-m32r.org> [m32r]
Cc: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Cc: Kyle McMartin <kyle@mcmartin.ca> [parisc]
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> [powerpc]
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390]
Cc: Thomas Gleixner <tglx@linutronix.de> [x86]
Cc: Ingo Molnar <mingo@redhat.com> [x86]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-20 12:18:14 +02:00
Stuart Menefy
fea966f756 sh: Remove implicit sign extension from assembler immediates
The SH instruction set has several instructions which accept an 8 bit
immediate operand. For logical instructions this operand is zero extended,
for arithmetic instructions the operand is sign extended. After adding an
option to the assembler to check this, it was found that several pieces
of assembly code were assuming this behaviour, and in one case
getting it wrong.

So this patch explicitly sign extends any immediate operands, which makes
it obvious what is happening, and fixes the one case which got it wrong.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24 17:09:53 +09:00
Magnus Damm
2d2bcd319a sh: fix romImage mach dir usage
This patch moves all the romImage related header files into
the mach/ directory.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-07 03:58:38 +09:00
Magnus Damm
3c928320b2 sh: romImage support V2
This patch contains support for the romImage build target V2.

The resulting romImage file should be burned to rom
or flash and could be used as small boot loader.

Board code should keep their setup code in the file
romimage.h located in their mach include directory.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-30 00:24:03 +09:00
Paul Mundt
fc6cca3917 Merge branches 'sh/compressors' and 'sh/stable-updates' 2009-07-21 17:37:18 +09:00
Paul Mundt
ef9b542fce sh: bzip2/lzma uImage support.
This builds on the bzip2/lzma zImage support change and wires it up for
uImages. Based on the blackfin implementation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-21 17:24:36 +09:00
Paul Mundt
3e28ad7b24 Merge branches 'sh/compressors' and 'sh/ftrace' 2009-07-12 11:45:25 -04:00
Paul Mundt
040f43e0bf sh64: Don't use PHYSADDR() for output_addr calculation.
Opencode the MEMORY_START offset directly, sh64 uses a slightly different
calculation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-11 13:36:25 -04:00
Paul Mundt
59f002964f sh: rename arch/sh/boot/compressed/misc_32.c -> misc.c
This is now used by both sh64 and regular sh, kill off the old sh64
version now too.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-11 13:32:24 -04:00
Paul Mundt
b14c6d428a sh: Consolidate the sh64 changes in arch/sh/boot/compressed/misc_32.c
This makes some minor changes to misc_32.c so that it can be used by
sh64.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-11 13:30:38 -04:00
Paul Mundt
07e88e1bfc sh: bzip2/lzma zImage support.
This plugs in bzip2 and lzma support for zImages.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-11 13:21:19 -04:00
Paul Mundt
df8ce2595f sh: Tidy up gzip-based zImage decompression.
This brings the zImage handling in to the current century, in preparation
for handling the other compression types.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-12 01:37:30 +09:00
Paul Mundt
473d1cf4ee sh: Decouple mcount from ftrace.
This adds a general CONFIG_MCOUNT in order to permit mcount generation
without ftrace support. This is primarily for allowing platforms to
enable aggressive stack overflow checking without having to enable ftrace
support. Based on the sparc64 implementation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-11 19:56:58 +09:00
Paul Mundt
1eca133cc9 sh: Merge the split arch/sh/boot/compressed/ Makefiles.
This kills off the _64 variant and moves the _32 one over as the generic
one to use.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-10 00:58:21 +09:00
Paul Mundt
b208835624 sh: Provide a BITS definition, use it in the arch/sh/boot/ Makefiles.
This introduces a BITS export that can handily be picked up by Makefiles
for cleaner sharing. Reflect its use in arch/sh/boot/compressed/ in
preparation for unifying the Makefiles.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-10 00:55:45 +09:00
Paul Mundt
20b27fa337 sh: Fix up the sh64 zImage build.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-10 00:36:22 +09:00
Paul Mundt
7b022d07a0 sh: Tidy up the ldscript output format specifier.
Tie this in to the Makefile directly, where we already know what we are
running on. This tidies up the linker script a bit, and is prep work for
unifying the arch/sh/boot/compressed linker scripts.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-10 00:25:08 +09:00
Yoshihiro Shimoda
2f47f44790 sh: Support fixed 32-bit PMB mappings from bootloader.
This provides a method for supporting fixed PMB mappings inherited from
the bootloader, as an alternative to the dynamic PMB mapping currently
used by the kernel. In the future these methods will be combined.

P1/P2 area is handled like a regular 29-bit physical address, and local
bus device are assigned P3 area addresses.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-10 15:49:54 +09:00
Paul Mundt
694f94f263 sh: FTRACE renamed to FUNCTION_TRACER.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-31 16:20:36 +09:00
Paul Mundt
9d2b1f81dd sh: ftrace support.
This adds support for ftrace to SH. This only includes CONFIG_FTRACE,
and does not handle dynamic ftrace presently.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-21 16:43:45 +09:00
Paul Mundt
6907e6a601 sh: Add the rest of the boot targets to arch/sh/boot/.gitignore.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-08 10:35:05 +09:00
Chris Smith
664718a343 sh: Fix uImage load address in 32-bit mode.
Fix "make uImage" load and entry addresses in 32-bit mode.

Signed-off-by: Chris Smith <chris.smith@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-08 10:35:04 +09:00
Paul Mundt
fa43972fab sh: fixup many sparse errors.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-08 10:35:04 +09:00
Paul Mundt
d27e0854d5 sh: Stub in a dummy ENTRY_OFFSET for uImage offset calculation.
If none is defined, provide a sane default, as we do for the other
options.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29 09:15:01 +09:00
Paul Mundt
f15cbe6f1a sh: migrate to arch/sh/include/
This follows the sparc changes a439fe51a1.

Most of the moving about was done with Sam's directions at:

http://marc.info/?l=linux-sh&m=121724823706062&w=2

with subsequent hacking and fixups entirely my fault.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29 08:09:44 +09:00
Yoshihiro Shimoda
82cb1f6fb3 sh: fix uImage Entry Point
fix the problem that cannot boot using uImage when PAGE_SIZE is
8kbyte or 64kbyte.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28 18:16:41 +09:00
Yoshinori Sato
f12ae6bc4a sh: Fix up link error on SH-2 zImage with older binutils.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28 18:10:33 +09:00
Thomas Petazzoni
2d6ffcca62 inflate: refactor inflate malloc code
Inflate requires some dynamic memory allocation very early in the boot
process and this is provided with a set of four functions:
malloc/free/gzip_mark/gzip_release.

The old inflate code used a mark/release strategy rather than implement
free.  This new version instead keeps a count on the number of outstanding
allocations and when it hits zero, it resets the malloc arena.

This allows removing all the mark and release implementations and unifying
all the malloc/free implementations.

The architecture-dependent code must define two addresses:
 - free_mem_ptr, the address of the beginning of the area in which
   allocations should be made
 - free_mem_end_ptr, the address of the end of the area in which
   allocations should be made. If set to 0, then no check is made on
   the number of allocations, it just grows as much as needed

The architecture-dependent code can also provide an arch_decomp_wdog()
function call.  This function will be called several times during the
decompression process, and allow to notify the watchdog that the system is
still running.  If an architecture provides such a call, then it must
define ARCH_HAS_DECOMP_WDOG so that the generic inflate code calls
arch_decomp_wdog().

Work initially done by Matt Mackall, updated to a recent version of the
kernel and improved by me.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Mikael Starvik <mikael.starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 10:53:28 -07:00
Mathieu Desnoyers
8cd9612e9b sh: remove -traditional.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
CC: Sam Ravnborg <sam@ravnborg.org>
CC: linux-sh@vger.kernel.org
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:46 +09:00
Manuel Lauss
85eee6072b sh: fix compressed kernel build
commit 54a0151041 broke zImage build on sh arch:

 LD      vmlinux
  SYSMAP  System.map
  SYSMAP  .tmp_System.map
  AS      arch/sh/boot/compressed/head_32.o
In file included from /k/arch/sh/boot/compressed/head_32.S:11:
/k/include/linux/linkage.h:34: error: syntax error in macro parameter list

Fix it for both sh and sh64.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-16 02:01:55 +09:00
Yoshihiro Shimoda
26b63e9951 sh: Fix up uImage compression type
Fix up uImage compression type.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-03-31 16:17:11 +09:00
Paul Mundt
66b5bf4216 sh: Fix uImage build error.
The printf string was broken in the same way the zImage one was before,
though the uImage managed to avoid getting fixed at that time. Do so now.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-03-14 17:19:38 +09:00
Paul Mundt
6fc5153aab sh: Fix up KERNEL_ENTRY calculation for uImage.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:19:01 +09:00
Thomas Betker
453ec9c1c3 sh: Fix up uImage target entry point.
This patch changes the uImage target so that it generates a wrapped
compressed vmlinux, rather than a wrapped zImage. The previous version
matched the ARM, this version matches the PPC. However I would question
how useful a self decompressing image is with a boot loader which does
decompression, so I think this is more useful. I also feel it matches
the descrition in the help text ("Compressed kernel image") better.

Signed-off-by: Thomas Betker <thomas.betker@5etech.eu>
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:59 +09:00
Stuart Menefy
d02b08f6e8 sh: Clean up places that make 29-bit physical assumptions.
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:59 +09:00
Paul Mundt
a23ba43573 sh: comment tidying for sh64->sh migration.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:58 +09:00
Paul Mundt
7137306806 sh: Merge the sh64 zImage bits.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:52 +09:00
Nobuhiro Iwamatsu
f7b6130e73 sh: Fix compression method when making uImage.
When uImage is made by using 'make uImage', zImage is used.
If zImage is used, the compression method need not be set.
However, it is set for "gzip" for a compression method.
I corrected to set "none".

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 11:13:54 +09:00
Sam Ravnborg
a0f97e06a4 kbuild: enable 'make CFLAGS=...' to add additional options to CC
The variable CFLAGS is a wellknown variable and the usage by
kbuild may result in unexpected behaviour.
On top of that several people over time has asked for a way to
pass in additional flags to gcc.

This patch replace use of CFLAGS with KBUILD_CFLAGS all over the
tree and enabling one to use:
make CFLAGS=...
to specify additional gcc commandline options.

One usecase is when trying to find gcc bugs but other
use cases has been requested too.

Patch was tested on following architectures:
alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k

Test was simple to do a defconfig build, apply the patch and check
that nothing got rebuild.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-14 22:21:35 +02:00
David McCullough
1f25756a11 sh: arch/sh/boot - fix shell usage
Fix the shell call to explicitly use bash, since they are bash
specific and not all systems have bash as the default.

Signed-off-by: David McCullough <david_mccullough@au.securecomputing.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-26 17:43:41 +09:00
Paul Mundt
e2dfb912d3 sh: Fix .empty_zero_page alignment for PAGE_SIZE > 4096.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:53:29 +09:00
Paul Mundt
cf00e20444 sh: Add uImage and S-rec generation support.
Add a couple of new targets, both for uImage and S-rec generation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:42:07 +09:00
Yoshinori Sato
9d4436a6fb sh: Add support for SH7206 and SH7619 CPU subtypes.
This implements initial support for the SH7206 (SH-2A) and SH7619
(SH-2) MMU-less CPUs.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:36 +09:00
Paul Mundt
3e6c999de9 sh: Initial gitignore list
Ignore build-time generated files.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-03 13:16:15 +09:00
Yoshinori Sato
a2d1a5fae6 sh: __addr_ok() and other misc nommu fixups.
A few more outstanding nommu fixups..

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 17:25:07 +09:00
Yoshinori Sato
e96636ccfa sh: Various nommu fixes.
This fixes up some of the various outstanding nommu bugs on
SH.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 17:21:02 +09:00
Paul Mundt
e7f93a355c sh: Make PAGE_OFFSET configurable.
nommu needs to be able to shift PAGE_OFFSET, so we switch it to a
non-user-visible CONFIG_PAGE_OFFSET and use that in the few places
where it matters.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 17:19:13 +09:00
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00