Commit graph

44 commits

Author SHA1 Message Date
Paul Gortmaker
617d3c7a50 tipc: compress out gratuitous extra carriage returns
Some of the comment blocks are floating in limbo between two
functions, or between blocks of code.  Delete the extra line
feeds between any comment and its associated following block
of code, to be consistent with the majority of the rest of
the kernel.  Also delete trailing newlines at EOF and fix
a couple trivial typos in existing comments.

This is a 100% cosmetic change with no runtime impact.  We get
rid of over 500 lines of non-code, and being blank line deletes,
they won't even show up as noise in git blame.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-30 15:53:56 -04:00
Allan Stephens
c74a46110f tipc: Remove duplicate check of message destination node
Eliminates a check in the processing of TIPC messages arriving from
off node that ensures the message is destined for this node, since this
check duplicates an earlier check. (The check would be necessary if TIPC
needed to be able to route incoming messages to another node, but the
elimination of multi-cluster support means that this never happens and
all incoming messages are consumed by the receiving node.)

Note: This change involves the elimination of a single "if" statement
with a large "then" clause; consequently, a significant number of lines
end up getting re-indented. In addition, a simple message header access
routine that is no longer referenced is eliminated. However, the only
functional change is the elimination of the single check described above.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-24 17:05:14 -05:00
Allan Stephens
fc0eea691a tipc: Introduce node signature field in neighbor discovery message
Adds support for the new "node signature" in neighbor discovery messages,
which is a 16 bit identifier chosen randomly when TIPC is initialized.
This field makes it possible for nodes receiving a neighbor discovery
message to detect if multiple neighboring nodes are using the same network
address (i.e. <Z.C.N>), even when the messages are arriving on different
interfaces.

This first phase of node signature support creates the signature,
incorporates it into outgoing neighbor discovery messages, and tracks
the signature used by valid neighbors. An upcoming patch builds on this
foundation to implement the improved duplicate neighbor detection checking.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-24 17:05:13 -05:00
Allan Stephens
3d749a6a26 tipc: Hide media-specific addressing details from generic bearer code
Reworks TIPC's media address data structure and associated processing
routines to transfer all media-specific details of address conversion
to the associated TIPC media adaptation code. TIPC's generic bearer code
now only needs to know which media type an address is associated with
and whether or not it is a broadcast address, and totally ignores the
"value" field that contains the actual media-specific addressing info.

These changes eliminate the need for a number of endianness conversion
operations and will make it easier for TIPC to support new media types
in the future.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-27 11:33:36 -05:00
Allan Stephens
741d9eb7b8 tipc: Cleanup of message header size terminology
Performs cosmetic cleanup of the symbolic names used to specify TIPC
payload message header sizes. The revised names now more accurately
reflect the payload messages in which they can appear. In addition,
several places where these payload message symbol names were being used
to create non-payload messages have been updated to use the proper
internal message symbolic name.

No functional changes are introduced by this rework.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-06-24 16:18:17 -04:00
Allan Stephens
7eb878ed8e tipc: Eliminate redundant masking in message header routines
Gets rid of unnecessary masking in two routines that set TIPC message
header fields. (The msg_set_bits() routine already takes care of
masking the new value to the correct size.)

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-06-24 16:18:15 -04:00
Allan Stephens
74d33b32de tipc: Eliminate message header routines for caching destination node
Gets rid of a pair of routines that provide support for temporarily
caching the destination node for a message in the associated message
buffer's application handle, since this capability is no longer used.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-06-24 16:18:15 -04:00
Allan Stephens
2689690469 tipc: Avoid recomputation of outgoing message length
Rework TIPC's message sending routines to take advantage of the total
amount of data value passed to it by the kernel socket infrastructure.
This change eliminates the need for TIPC to compute the size of outgoing
messages itself, as well as the check for an oversize message in
tipc_msg_build().  In addition, this change warrants an explanation:

   -     res = send_packet(NULL, sock, &my_msg, 0);
   +     res = send_packet(NULL, sock, &my_msg, bytes_to_send);

Previously, the final argument to send_packet() was ignored (since the
amount of data being sent was recalculated by a lower-level routine)
and we could just pass in a dummy value (0). Now that the
recalculation is being eliminated, the argument value being passed to
send_packet() is significant and we have to supply the actual amount
of data we want to send.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10 16:03:57 -04:00
Allan Stephens
92138d1f25 tipc: Cosmetic consolidation of internal message type definitions
Half of the #define entries in msg.h were down at the bottom
of the header, instead of up at the top before any of the static
inlines etc.   Relocate them up to the top, to be consistent with
the other normal linux header file layout conventions.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10 16:03:45 -04:00
Allan Stephens
19f53d2cef tipc: Eliminate unused routing message definitions
Gets rid of unused constants defining the types used in routing
messages. These messages no longer exist in TIPC now that multicluster
and multizone support has been eliminated.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10 16:03:44 -04:00
Allan Stephens
cc4c4353f0 tipc: Update comments in message header include file
Removes comments in TIPC's message header include file that are
outdated and/or unnecessary. Also introduces short comments (or
supplements existing ones) to better describe several set of existing
symbolic constants.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10 16:03:36 -04:00
Allan Stephens
390bce4237 tipc: Eliminate obsolete routine for handling routed messages
Eliminates a routine that is used in handling messages arriving from
another cluster or zone. Such messages can no longer be received by TIPC
now that multi-cluster and multi-zone network support has been eliminated.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13 16:35:19 -04:00
Allan Stephens
7945c1fb02 tipc: Eliminate remaining support for routing table messages
Gets rid of all remaining code relating to ROUTE_DISTRIBUTOR messages.
These messages were only used in multi-cluster and multi-zone networks,
which TIPC no longer supports. (For safety, TIPC now treats such messages
the same way that it handles other unrecognized messages.)

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13 16:35:19 -04:00
Allan Stephens
d901a42b27 tipc: Eliminate unnecessary constant for neighbor discovery msg size
Eliminates an unnecessary constant that defines the size of a LINK_CONFIG
message, and uses one of the existing standard message size symbols in
its place. (The defunct constant was located in the wrong place anyway,
since it was grouped with other constants that define message users instead
of message sizes.)

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13 16:35:18 -04:00
Allan Stephens
77f167fcce tipc: make msg_set_redundant_link() consistent with other set ops
All the other boolean like msg_set_X(m) operations don't
export both a msg_set_X(a) and a msg_clear_X(m), but instead
just have the single msg_set_X(m, val) variant.

Make the redundant_link one consistent by having the set take
a value, and delete the msg_clear_redundant_link() anomoly.
This is a cosmetic change and should not change behaviour.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13 16:35:17 -04:00
Allan Stephens
e7b3acb6a8 tipc: Eliminate timestamp from link protocol messages
Removes support for the timestamp field of TIPC's link protocol messages.

This field was previously used to hold an OS-dependent timestamp value
that was used to assist in debugging early versions of TIPC. The field
has now been deemed unnecessary and has been removed from the latest TIPC
specification. This change has no impact on the operation of TIPC since
the field was set by TIPC, but never referenced.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-13 16:35:17 -04:00
Allan Stephens
2e07dda165 tipc: Remove unused message header field for requested number of links
Eliminates support for the "number of requested links" field in a neighbor
discovery message. This field was never used and has been removed from
the TIPC 2.0 protocol specification.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-02-23 18:05:22 -05:00
Allan Stephens
741de3e9ff tipc: Remove support for per-connection message sequence numbering
Eliminates TIPC's prototype support for message sequence numbering
on routable connections (i.e. connections requiring more than one hop).
This capability isn't currently used, and can be removed since TIPC
only supports systems in which all inter-node communication can be
achieved in a single hop.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-02-23 18:05:21 -05:00
Allan Stephens
0e65967e33 tipc: cleanup various cosmetic whitespace issues
Cleans up TIPC's source code to eliminate deviations from generally
accepted coding conventions relating to leading/trailing white space
and white space around commas, braces, cases, and sizeof.

These changes are purely cosmetic and do not alter the operation of TIPC
in any way.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-01 13:57:56 -08:00
Allan Stephens
51a8e4dee7 tipc: Remove prototype code for supporting inter-cluster routing
Eliminates routines and data structures that were intended to allow
TIPC to route messages to other clusters. Currently, TIPC supports only
networks consisting of a single cluster within a single zone, so this
code is unnecessary.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-01 13:57:48 -08:00
Allan Stephens
08c80e9a03 tipc: Remove prototype code for supporting slave nodes
Simplifies routines and data structures that were intended to allow
TIPC to support slave nodes (i.e. nodes that did not have links to
all of the other nodes in its cluster, forcing TIPC to route messages
that it could not deliver directly through a non-slave node).

Currently, TIPC supports only networks containing non-slave nodes,
so this code is unnecessary.

Note: The latest edition of the TIPC 2.0 Specification has eliminated
the concept of slave nodes entirely.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-01 13:57:48 -08:00
Allan Stephens
d265fef6dd tipc: Remove obsolete native API files and exports
As part of the removal of TIPC's native API support it is no longer
necessary for TIPC to export symbols for routines that can be called
by kernel-based applications, nor for it to have header files that
kernel-based applications can include to access the declarations for
those routines. This commit eliminates the exporting of symbols by
TIPC and migrates the contents of each obsolete native API include
file into its corresponding non-native API equivalent.

The code which was migrated in this commit was migrated intact, in
that there are no technical changes combined with the relocation.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-02 13:34:01 -08:00
Eric Dumazet
a02cec2155 net: return operator cleanup
Change "return (EXPR);" to "return EXPR;"

return is not a function, parentheses are not required.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-23 14:33:39 -07:00
Allan Stephens
23461e835b tipc: Reduce footprint by un-inlining tipc_msg_* routines
Convert tipc_msg_* inline routines that are more than one line into
standard functions, thereby eliminating some repeated code.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-12 23:02:29 -07:00
Allan Stephens
c68ca7b720 tipc: add tipc_ prefix to fcns targeted for un-inlining
These functions have enough code in them such that they
seem like sensible targets for un-inlining.  Prior to doing
that, this adds the tipc_ prefix to the functions, so that
in the event of a panic dump or similar, the subsystem from
which the functions come from is immediately clear.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-12 23:02:25 -07:00
Allan Stephens
40aecb1b13 tipc: Message rejection rework preparatory changes
This patch defines a few new message header manipulation routines,
and generalizes the usefulness of another, in preparation for upcoming
rework of TIPC's message rejection code.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-04 17:54:48 -07:00
Allan Stephens
bd7845337b tipc: Expand link sequence gap field to 13 bits
This patch increases the "sequence gap" field of the LINK_PROTOCOL
message header from 8 bits to 13 bits (utilizing 5 previously
unused 0 bits).  This ensures that the field is big enough to
indicate the loss of up to 8191 consecutive messages on the link,
thereby accommodating the current worst-case scenario of 4000
lost messages.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-04 17:47:30 -07:00
Allan Stephens
7571521756 tipc: Optimize message initialization routine
This patch eliminates the rarely-used "error code" argument
when initializing a TIPC message header, since the default
value of zero is the desired result in most cases; the few
exceptional cases now set the error code explicitly.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-04 17:37:34 -07:00
Al Viro
becf3da20e tipc: endianness annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-27 14:26:49 -07:00
Allan Stephens
c0cb7ef086 [TIPC]: Enhancements to message header writing
This patch makes two enhancements to the routine used to
set bit fields within a TIPC message header:

 1) It now ignores any bits of the new field value that are not
    covered by the mask being used.  (Previously, if the new value
    exceeded the size of the mask the extra bits could corrupt
    other fields in the message header word being updated.)

 2) The code has been optimized to minimize the number of run-time
    endianness conversion operations by leveraging the fact that the
    mask (and, in some cases, the value as well) is constant and the
    necessary conversion can be performed by the compiler.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-06 15:08:10 -08:00
Allan Stephens
37695420a2 [TIPC]: Use correct bitmask when setting version
This patch ensures that the 3-bit version field of the TIPC
message header is masked correctly when written into a message.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-06 15:07:42 -08:00
Allan Stephens
06d82c9191 [TIPC]: Minor cleanup of message header code
This patch eliminates some unused or duplicate message header
symbols, and fixes up the comments and/or location of a few
other symbols.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-06 15:06:55 -08:00
Allan Stephens
8c8696553a [TIPC]: Removal of message header option code
This patch removes code associated with optional, user-specified
fields of the TIPC message header.  Such fields were never
utilized by TIPC, and have now been removed from the protocol
specification.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-06 15:05:07 -08:00
Ilpo Järvinen
86121fe5b4 [TIPC]: Kill unused static inline (x5)
All these static inlines are unused:

in_own_zone     1 (net/tipc/addr.h)
msg_dataoctet   1 (net/tipc/msg.h)
msg_direct      1 (include/net/tipc/tipc_msg.h)
msg_options     1 (include/net/tipc/tipc_msg.h)
tipc_nmap_get   1 (net/tipc/bcast.h)

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-07 18:17:13 -08:00
Al Viro
582ee43dad net/* misc endianness annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26 11:11:56 -07:00
Allan Stephens
1f9eda7e2b [TIPC]: Enhancements to msg_set_bits() routine
This patch makes two enhancements to msg_set_bits():

1) It now ignores any bits of the new field value that are not
   covered by the mask being used.  (Previously, if the new value
   exceeded the size of the mask the extra bits could corrupt
   other fields in the message header word being updated.)

2) The code has been optimized to minimize the number of run-time
   endianness conversion operations by leveraging the fact that the
   mask (and, in some cases, the value as well) is constant and the
   necessary conversion can be performed by the compiler.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Jon Paul Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:29:49 -07:00
Arnaldo Carvalho de Melo
27d7ff46a3 [SK_BUFF]: Introduce skb_copy_to_linear_data{_offset}
To clearly state the intent of copying to linear sk_buffs, _offset being a
overly long variant but interesting for the sake of saving some bytes.

Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2007-04-25 22:28:29 -07:00
YOSHIFUJI Hideaki
c430728526 [NET] TIPC: Fix whitespace errors.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-10 23:20:15 -08:00
Per Liden
4323add677 [TIPC] Avoid polluting the global namespace
This patch adds a tipc_ prefix to all externally visible symbols.

Signed-off-by: Per Liden <per.liden@ericsson.com>
2006-01-18 00:45:16 +01:00
Jon Maloy
5f7c3ff6a2 [TIPC] Minor changes to #includes
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
2006-01-18 00:45:14 +01:00
Per Liden
593a5f22d8 [TIPC] More updates of file headers
Updated copyright notice to include the year the file was
actually created. Information about file creation dates
was extracted from the files in the old CVS repository
at tipc.sourceforge.net.

Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-12 14:06:39 -08:00
Per Liden
9da1c8b694 [TIPC] Update of file headers
The copyright statements from different parts of Ericsson
have been merged into one.

Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-12 14:06:38 -08:00
Per Liden
9ea1fd3c1a [TIPC] License header update
The license header in each file now more clearly state that this
code is licensed under a dual BSD/GPL. Before this was only
evident if you looked at the MODULE_LICENSE line in core.c.

Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-12 14:06:36 -08:00
Per Liden
b97bf3fd8f [TIPC] Initial merge
TIPC (Transparent Inter Process Communication) is a protocol designed for
intra cluster communication. For more information see
http://tipc.sourceforge.net

Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-12 14:06:31 -08:00