Commit graph

303 commits

Author SHA1 Message Date
Andrew Vasquez
af2709fd0d [SCSI] qla2xxx: Update version number to 8.02.00-k5.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23 15:55:16 -04:00
Andrew Vasquez
8b7afc2a90 [SCSI] qla2xxx: Correct display of ISP serial-number.
The original serial-number calculations based on WWPN no longer
apply to newer ISPs (ISP24xx and ISP25xx).  These newer board's
serial number reside in the VPD.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23 15:54:54 -04:00
Andrew Vasquez
6acf819002 [SCSI] qla2xxx: Correct residual-count handling discrepancies during UNDERRUN handling.
For recent ISPs, software during CS_UNDERRUN handling must
determine if the two residuals, firmware-calculated and FCP_RSP,
are different to recognize if a frame has been dropped.  Update
the driver to catch this condition, and clear the
SS_RESIDUAL_UNDER and lscsi_status bits.  This logic is
consistent with what earlier firmwares did by explicitly
cracking open the FCP_RSP statuses and clearing
SS_RESIDUAL_UNDER.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23 15:54:41 -04:00
Andrew Vasquez
285d0321d1 [SCSI] qla2xxx: Make driver (mostly) legacy I/O port free.
Recent ISPs need only the single MMIO BAR to manipulate HW
registers.  Unfortunately, ISP21xx, ISP22xx, ISP23xx, and ISP63xx
type cards still require the I/O mapped region to manipulate the
FLASH via the two HW flash-registers (flash_address and
flash_data).

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23 15:54:28 -04:00
Andrew Vasquez
94d6a2b328 [SCSI] qla2xxx: Fix issue where final flash-segment updates were falling into the slow-path write handler.
Original implementation would not use the burst-write mechanisms
for requests equal to OPTROM_BURST_DWORDS transfer dwords.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23 15:54:10 -04:00
Andrew Vasquez
2c96d8d0c1 [SCSI] qla2xxx: Handle unaligned sector writes during NVRAM/VPD updates.
Since both NVRAM and VPD regions of the flash reside on unaligned
sector boundaries, during update, the driver must perform a
read-modify-write operation to the composite NVRAM/VPD region.
This affects ISP25xx type boards only.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23 15:53:55 -04:00
Andrew Vasquez
a3a63d55a4 [SCSI] qla2xxx: Defer explicit interrupt-polling processing to init-time scenarios.
As the intermixing may cause issues where HCCR bits could be
cleared inappropriately during MSI/MSI-X interrupt handling.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23 15:53:41 -04:00
Andrew Vasquez
6557f3a06a [SCSI] qla2xxx: Resync with latest HBA SSID specification -- 2.2u.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23 15:53:23 -04:00
Andrew Morton
875baf3cbc [SCSI] qla2xxx: printk fixes
drivers/scsi/qla2xxx/qla_sup.c: In function 'qla24xx_write_flash_data':
drivers/scsi/qla2xxx/qla_sup.c:655: warning: format '%llx' expects type 'long long unsigned int', but argument 6 has type 'dma_addr_t'
drivers/scsi/qla2xxx/qla_sup.c: In function 'qla25xx_read_optrom_data':
drivers/scsi/qla2xxx/qla_sup.c:1853: warning: format '%llx' expects type 'long long unsigned int', but argument 6 has type 'dma_addr_t'

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-18 08:28:10 -04:00
FUJITA Tomonori
9cb83c7529 [SCSI] add use_sg_chaining option to scsi_host_template
This option is true if a low-level driver can support sg
chaining. This will be removed eventually when all the drivers are
converted to support sg chaining. q->max_phys_segments is set to
SCSI_MAX_SG_SEGMENTS if false.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:24:32 +02:00
Andrew Vasquez
095862ab98 [SCSI] qla2xxx: Update version number to 8.02.00-k4.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:50:44 -04:00
Andrew Vasquez
39bd962269 [SCSI] qla2xxx: Limit iIDMA speed adjustments.
Do not adjust the iIDMA speed on ports which have a faster
link-speed than the HBA itself.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:50:40 -04:00
Andrew Vasquez
87f27015b8 [SCSI] qla2xxx: Rework MSI-X handlers.
Since MSI-X vectors do not require a clearing "handshake" from
the system perspective, and the registered handler will not be
called more than once for one occurrence of receipt of a vector,
there is no requirement to flush the risc register write clearing
the interrupt condition in the risc. Also, since the msi-x
registered handlers are optimised for a particular vector, it is
preferable to handle the one vector received per invocation of
the handler.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:50:37 -04:00
Andrew Vasquez
8b3253d10f [SCSI] qla2xxx: Clear options-flags while staging firmware-execution.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:50:33 -04:00
Andrew Vasquez
26ff776d1d [SCSI] qla2xxx: Sparse cleanups in qla_mid.c
Make several needlessly global functions static:
- qla2x00_mark_vp_devices_dead()
- qla24xx_configure_vp()

Remove unused function qla24xx_modify_vport().

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:50:29 -04:00
Andrew Vasquez
700ca0e701 [SCSI] qla2xxx: Cleanup several 'sparse' warnings.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:50:26 -04:00
Andrew Vasquez
f363b9434a [SCSI] qla2xxx: Use shost_priv().
Drop usage of legacy to_qla_host() macro.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:50:22 -04:00
Andrew Vasquez
e745759a0f [SCSI] qla2xxx: Remove unused member (list) from srb_t structure.
This change reduces by as much as 16% the memory footprint for
each allocated sbr_t structure requested from the mempool.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:50:17 -04:00
Seokmann Ju
4d0ea24769 [SCSI] qla2xxx: Retrieve max-NPIV support capabilities from FW.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:50:14 -04:00
Andrew Vasquez
c45bcc8e77 [SCSI] qla2xxx: Use the correct pointer-address during NVRAM writes.
Original code, incorrectly passed the address-of a pointer rather
than the pointer value itself.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:50:10 -04:00
Andrew Vasquez
8a85e17152 [SCSI] qla2xxx: Set correct attribute count during FDMI RPA.
Also remove legacy '/proc' name during OS_DEVICE_NAME
registration.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:50:06 -04:00
Ravi Anand
63a8651f25 [SCSI] qla2xxx: Correct infinite-login-retry issue.
Where the DPC logic would get jammed into continuously
reloging-into a port.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:50:02 -04:00
Andrew Vasquez
b583692739 [SCSI] qla2xxx: Query additional RISC registers during ISP25XX firmware dump.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:49:58 -04:00
Andrew Vasquez
c3b058afae [SCSI] qla2xxx: Correct staging of RISC while attempting to pause.
There's no need to reset the RISC prior to pausing.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:49:54 -04:00
Andrew Vasquez
05236a050f [SCSI] qla2xxx: Query additional RISC information during a pause.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:49:51 -04:00
Seokmann Ju
14e660e677 [SCSI] qla2xxx: Add PCI error recovery support.
Additional cleanups and
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:49:47 -04:00
Joe Carnuccio
b7cc176c9e [SCSI] qla2xxx: Allow region-based flash-part accesses.
Additional cleanups and
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:49:42 -04:00
Andrew Vasquez
338c9161e4 [SCSI] qla2xxx: Add flash burst-read/write support.
Newer ISPs support a mechanism to read and write flash-memory via
the firmware LOAD/DUMP memory mailbox command routines.  When
supported, utilizing these mechanisms significantly reduces
overall access times.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:49:38 -04:00
Andrew Vasquez
c81d04c9e2 [SCSI] qla2xxx: Collapse and simplify ISP2XXX firmware dump routines.
Add IO-base-window accessor functions.  Merge duplicate
RISC-pause and soft-reset code segments.  Drop 'eye-watering'
__iomem casting.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:49:34 -04:00
Mariusz Kozlowski
bbfbbbc118 [SCSI] kmalloc + memset conversion to kzalloc
In NCR_D700, a4000t, aic7xxx_old, bvme6000, dpt_i2o, gdth, lpfc,
megaraid, mvme16x osst, pluto, qla2xxx, zorro7xx

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:41:00 -04:00
Andrew Vasquez
604cd794de [SCSI] qla2xxx: Update version number to 8.02.00-k3.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-15 13:03:57 -05:00
Andrew Vasquez
6afd9763c1 [SCSI] qla2xxx: Correct mailbox register dump for FWI2 capable ISPs.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-15 13:03:43 -05:00
Andrew Vasquez
a3cbdfad15 [SCSI] qla2xxx: Correct 8GB iIDMA support.
Original implementation manipulated the FC_GS values for
port-speed.  Transition the codes to use the driver's own
internal representations as this makes for a reduction in
duplicate 'conversion' codes throughout the driver.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-15 13:03:20 -05:00
Andrew Vasquez
02d638b4b7 [SCSI] qla2xxx: Correct management-server login-state synchronization issue.
Transitioning link-state via NOS/OLS requires a relogin to a
fabric's Management Server.  Request relogin when the firmware
issues a point-to-point asynchronous event (0x8030).

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-15 13:02:57 -05:00
Andrew Vasquez
8fef696b00 [SCSI] qla2xxx: Don't modify parity bits during ISP25XX restart.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-15 13:02:36 -05:00
Andrew Vasquez
29856e2841 [SCSI] qla2xxx: Allocate enough space for the full PCI descriptor.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-15 13:02:17 -05:00
Seokmann Ju
53772a2cb4 [SCSI] qla2xxx: fix panic caused by previous patch
- this patch will fix a panic caused by omitted memory allocation for the nvram.

Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-31 10:45:07 -05:00
Seokmann Ju
281afe1947 [SCSI] qla2xxx: fix to honor ignored parameters in sysfs attributes
This is a patch to fix 'segmentation fault' issue which was initiated
by Richard Lary <rlary@us.ibm.com>.  Thanks again Richard.

- on following sysfs attritute function, changes have made so that both
  count and offset input parameters are honored by the functions.
    = qla2x00_sysfs_read_nvram()
    = qla2x00_sysfs_read_vpd()
- made changes so that NVRAM data to be cached to minimize H/W accesses
  during agent querying of the driver's.

Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-27 09:14:22 -04:00
Boaz Harrosh
4b39c1d983 [SCSI] qla2xxx: Data accessors Cleanup of last merge
- Left overs from last code merges of qla2xxx

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-23 14:27:48 -05:00
Linus Torvalds
e6f194d8f6 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (60 commits)
  [SCSI] libsas: make ATA functions selectable by a config option
  [SCSI] bsg: unexport sg v3 helper functions
  [SCSI] bsg: fix bsg_unregister_queue
  [SCSI] bsg: make class backlinks
  [SCSI] 3w-9xxx: add support for 9690SA
  [SCSI] bsg: fix bsg_register_queue error path
  [SCSI] ESP: Increase ESP_BUS_TIMEOUT to 275.
  [SCSI] libsas: fix scr_read/write users and update the libata documentation
  [SCSI] mpt fusion: update Kconfig help
  [SCSI] scsi_transport_sas: add destructor for bsg
  [SCSI] iscsi_tcp: buggered kmalloc()
  [SCSI] qla2xxx: Update version number to 8.02.00-k2.
  [SCSI] qla2xxx: Add ISP25XX support.
  [SCSI] qla2xxx: Use pci_try_set_mwi().
  [SCSI] qla2xxx: Use PCI-X/PCI-Express read control interfaces.
  [SCSI] qla2xxx: Re-factor isp_operations to static structures.
  [SCSI] qla2xxx: Validate mid-layer 'underflow' during check-condition handling.
  [SCSI] qla2xxx: Correct setting of 'current' and 'supported' speeds during FDMI registration.
  [SCSI] qla2xxx: Generalize iIDMA support.
  [SCSI] qla2xxx: Generalize FW-Interface-2 support.
  ...
2007-07-22 11:36:49 -07:00
Andrew Vasquez
6585c1b3e2 [SCSI] qla2xxx: Update version number to 8.02.00-k2.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-20 09:25:47 -05:00
Andrew Vasquez
c3a2f0dfe1 [SCSI] qla2xxx: Add ISP25XX support.
Large code-reuse from ISP24xx, consolidate RISC memory
extraction routines during firmware-dump.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-20 09:25:29 -05:00
Andrew Vasquez
af6177d88d [SCSI] qla2xxx: Use pci_try_set_mwi().
As the "must-check" return-value of pci_set_msi() is never
really checked.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-20 09:24:59 -05:00
Andrew Vasquez
f85ec187dc [SCSI] qla2xxx: Use PCI-X/PCI-Express read control interfaces.
Original from Peter Oruba <peter.oruba@amd.com>.  Additional
cleanups included.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-20 09:24:41 -05:00
Andrew Vasquez
fd34f55694 [SCSI] qla2xxx: Re-factor isp_operations to static structures.
In preparation for new ISP types.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-20 09:24:22 -05:00
Shyam Sundar
8084fe168a [SCSI] qla2xxx: Validate mid-layer 'underflow' during check-condition handling.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-20 09:24:04 -05:00
Andrew Vasquez
5881569bb3 [SCSI] qla2xxx: Correct setting of 'current' and 'supported' speeds during FDMI registration.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-20 09:23:45 -05:00
Andrew Vasquez
c76f2c013f [SCSI] qla2xxx: Generalize iIDMA support.
In preparation for new ISP types.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-20 09:02:04 -05:00
Andrew Vasquez
e428924ccd [SCSI] qla2xxx: Generalize FW-Interface-2 support.
In preparation for new ISP types.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-20 08:59:09 -05:00
Paul Mundt
20c2df83d2 mm: Remove slab destructors from kmem_cache_create().
Slab destructors were no longer supported after Christoph's
c59def9f22 change. They've been
BUGs for both slab and slub, and slob never supported them
either.

This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20 10:11:58 +09:00