This is the Intel SST audio driver.
As compared to the previous versions it has all the printks and other stuff
noted cleaned up and more hardware support. The Aava support is disabled in
this patch (is_aava resolves to 0) because the Aava board detection logic
is not yet upstream.
The driver itself is a combination of a traditional ALSA driver and a
hardware assisted offload driver which can play audio while the processor
is asleep but which can't do all the more interactive stuff.
In the general case most software would use the ALSA interface, but the
other interface is needed for certain classes of use such as music playback
on highly power consumption sensitive devices.
This is going to staging primarily because it depends upon the staging memrar
driver.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Harsha Priya <priya.harsha@intel.com>
[Merged together and tweaked for -next]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It doesn't build yet, as it depends on some changes that are not yet
in the tree, so mark it as BROKEN for now until that gets resolved.
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add missing new line
Fix typo
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Move the header to a standard linux device driver location.
This should pave the way for other drivers to be moved into the relevant
directories.
ti_wilink_st.h is a common header file used by the TI's shared transport device
driver for WiLink chipsets. Each individual protocol drivers like bluetooth
driver, FM V4L2 driver and GPS drivers will make use of this header.
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ti_wilink_st.h had the line discipline number which the user-space
daemon refers to, to install and un-install the line discipline upon
request from the shared transport driver via rfkill device.
On moving this line discipline number to standard location of tty.h
drop the __KERNEL__ flag in the header, since the header file would
no longer be used by user-space.
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Texas Instrument's WiLink7 connectivity devices pack wireless connectivity
technologies like Bluetooth, FM Radio Receiver and Transmitter, GPS and WLAN
into a single die.
The BT, FM and GPS core on the chip are interfaced to application
processors via a single UART.
This line discipline driver allows such different technologies to be used
simultaneous and independent of each other.
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
I'm getting an oops when running mkfs on zram:
NIP [d0000000030e0340] .zram_inc_stat+0x58/0x84 [zram]
[c00000006d58f720] [d0000000030e091c] .zram_make_request+0xa8/0x6a0 [zram]
[c00000006d58f840] [c00000000035795c] .generic_make_request+0x390/0x434
[c00000006d58f950] [c000000000357b14] .submit_bio+0x114/0x140
[c00000006d58fa20] [c000000000361778] .blkdev_issue_discard+0x1ac/0x250
[c00000006d58fb10] [c000000000361f68] .blkdev_ioctl+0x358/0x7fc
[c00000006d58fbd0] [c0000000001c1c1c] .block_ioctl+0x6c/0x90
[c00000006d58fc70] [c0000000001984c4] .do_vfs_ioctl+0x660/0x6d4
[c00000006d58fd70] [c0000000001985a0] .SyS_ioctl+0x68/0xb0
Since disksize no longer starts as 0 it looks like we can call
zram_make_request before the device has been initialised. The patch below
fixes the immediate problem but this would go away if we move the
initialisation function elsewhere (as suggested in another thread).
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
get_stat_data is not fully initialized before copy_to_user() call,
e.g. LedStat is not always set.
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
init_ft1000_netdev() calls kfree(netdev) instead of free_netdev(netdev).
It doesn't check kmalloc() return value.
ft1000_read_fifo_reg() doesn't free dr on error and calls kfree(urb)
instead of usb_free_urb(urb). Also kfree(NULL) is OK.
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Rename camel case variables in channel.c and changed them to
lowercase.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As per Peter's request, move people to autofs4, don't fix up autofs3.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There were a number of unused and unneeded defines in here, remove them.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use 'static', it's the correct thing to do.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use 'const', it's the correct thing to do.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This changes the usage everywhere in the driver, and removes
the definition as it should no longer be used anywhere.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This changes the usage everywhere in the driver, and removes
the definition as it should no longer be used anywhere.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This changes the usage everywhere in the driver, and removes
the definition as it should no longer be used anywhere.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This changes the usage everywhere in the driver, and removes
the definition as it should no longer be used anywhere.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It's no longer needed anywhere, so remove it.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replace uint8 with u8, the correct kernel type to be using here.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replace uint8 with u8, the correct kernel type to be using here.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replace uint8 with u8, the correct kernel type to be using here.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replace uint8 with u8, the correct kernel type to be using here.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replace uint8 with u8, the correct kernel type to be using here.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
No need for a driver to define NULL, the core kernel handles that.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
They are not used anywhere, nor should they be defined.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Include other files from the top, it's easier to unwind the logic that
way.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We never care about __STRICT_ANSI__ from within the kernel, so remove
this logic.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The core kernel type code handles this properly, no driver
should ever do it.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
No driver should ever do this.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It was never used.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It's not ever used, so remove the typedef. Floating point isn't used
in the kernel, so this could never be an issue here.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use the "real" inline marking for functions.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
For a .h file, you never need to check it, the .h file does it
itself. For the typedef.h file, this is never needed.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Start the process of moving #includes out of headers and into individual C files.
For now, this patch addresses the softmac side of the driver, fullmac still to
be done.
Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove definitions and structures that are no longer needed. Most of the
remaining ones can probably be replaced with the equivalent ones from
include/linux/ieee80211.h.
Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove assertions on the size of several structures. These structures are
never used anywhere.
Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed several unused and rarely used debug printout routines that look into
portions of the frame that are more properly left to the mac80211 stack.
Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove an unused field from the wlc_info structure, so that the underlying
structure can also be cleaned up.
Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove assertions on the size of several structures. These structures are
never used anywhere.
Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove the wl_assoc_info_t structure. It's never used, and depends on
structures defined in other header files that can now also be cleaned up.
Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
smbfs has been scheduled for removal in 2.6.27, so
maybe we can now move it to drivers/staging on the
way out.
smbfs still uses the big kernel lock and nobody
is going to fix that, so we should be getting
rid of it soon.
This removes the 32 bit compat mount and ioctl
handling code, which is implemented in common fs
code, and moves all smbfs related files into
drivers/staging/smbfs.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This lists what's going to happen to the filesystem (i.e. removal
in 2.6.38 unless someone steps up to maintain it.)
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Nobody appears to be interested in fixing autofs3 bugs
any more and it uses the BKL, which is going away.
Move this to staging for retirement. Unless someone
complains until 2.6.38, we can remove it for good.
The include/linux/auto_fs.h header file is still used
by autofs4, so it remains in place.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Ian Kent <raven@themaw.net>
Cc: autofs@linux.kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now the tidspbridge uses the API's from
iovmm module.
Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
DSP Bridge needs to disable the peripheral clocks when switches to
BRD_STOPPED since that would prevent the domain to enter in OFF state.
Signed-off-by: Ernesto Ramos <ernesto@ti.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Resendig this patch since it was missed in the last merge...
Remove find_lcm within nldr.c and use standard
kernel function lcm().
Signed-off-by: Ernesto Ramos <ernesto@ti.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Resending this patch since it was missed in the last merge...
Remove unnecessary cmm_xlator_delete function and use
kfree() kernel function directly.
Signed-off-by: Ernesto Ramos <ernesto@ti.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This marks up the code where sparse complains in most cases.
Most of the changes are in the ioctl handling code, which
gets __user annotations, finding one unchecked user access.
The rest is mostly about marking functions static when they
are only used in one file.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This removes all warnings I get on a 64 bit build except
for those that look unfixable, where we convert a pointer
to a 32 bit integer and change its byte order!
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In the original code, address space annotations are missing,
which hides a possible unchecked user pointer access.
Two functions use a lot of stack space.
Extern declarations are all in the wrong place, which leads
to type differences between caller and callee in some cases.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This lets us see clearer when stuff breaks.
Most of the changes are fixes for casts between int and pointer
that don't work on 64 bit.
The ioctl function uses a large amount of stack, which gets
fixed by allocating the buffer dynamically.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As a preparation for changing the default behaviour of llseek to no_llseek,
every file_operations structure should have a .llseek operation.
There are three new instances in staging now, which can all be changed
into no_llseek explicitly since the devices do not need to seek.
Add nonseekable_open where appropriate, to prevent pread/pwrite as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Atheros originally had posted a vendor driver to support
the Atheros AR9170 devices, the driver was called otus [1].
The otus driver was staging quality but it, along with
other chipset documentation helped the community do a rewrite
for a proper driver. Johannes Berg did the ar9170 [2] work and
Christian Lamparter then followed up with some final touches
for inclusion upstream.
The original goal behind ar9170 was to match all functionality,
performance, stability and quality against Otus. In the end this
proved quite challenging even with GPLv2 firmware.
Christian then decided to work on a replacement driver with
new enhancements to the GPLv2 firmware. It took 1 year, 5 months,
9 days since this merge of ar9170usb upstream to release carl9170
with upstream inclusion intentions but its now there.
We remove the Otus driver now as the carl9170 driver actually
ends up not only replacing but superseding the staging Otus driver!
http://wireless.kernel.org/en/users/Drivers/otushttp://wireless.kernel.org/en/users/Drivers/ar9170http://wireless.kernel.org/en/users/Drivers/carl9170
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the ni_labpc.c file that fixes up, EXPORT SYMBOL(foo)
should immediately follow its function/variable warnings, found by the
checkpatch.pl tool
Signed-off-by: Maurice Dawson <mauricedawson2699@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
wl_remove() is now called from places other than the .remove field of struct pci_driver so
do not annotate wl_remove() with __devexit. This removes the debug section mismatch warning
introduced by the previous nonexistant firmware patch.
Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes "#ifdef BRCM_FULLMAC" mess which shows
in siutils.c/hndpmu.c.
All unnecessary #ifdefs were erased.
Also as a part of this work, bcmutils.c was also modified.
Signed-off-by: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This removes compile flags that are completely unnecessary when building the
brcmfmac driver.
Also sorts the options to make it a bit easier to look at them.
Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Trim down bcmip.h to only whats needed, purge the rest.
Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now that we aren't using the rc_lock variable, delete it to keep gcc
happy and not complaining about it.
Cc: Al Cho <acho@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The other part of keucr lost usb disconnect.
Unplug SDcard after thread scan,the wrong rule in usb_stor_port_reset,
so the driver still fail in stress test.
Signed-off-by: Al Cho <acho@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
From a95892fc2246d6dc45f57b7dd68f32b9b28bd0f7 Mon Sep 17 00:00:00 2001
From: Arthur Benilov <arthur.benilov@gmail.com>
Date: Fri, 24 Sep 2010 13:51:07 +0200
Subject: [PATCH] Staging: vme: Assure D16 cycle if required in master_read and master_write
memcpy_fromio() and memcpy_toio() functions apply internally to __memcpy() that
performs data transfer in 32-bits or 8-bits blocks (at least on x86). This makes
impossible to perform D16 cycle with ca91cx42 bridge. Provided modification
assures performing data transfer with 32, 16, and 8 bits chunks.
Signed-off-by: Arthur Benilov <arthur.benilov@iba-group.com>
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Freeing netdev without free_netdev() leads to net, tx leaks.
I might lead to dereferencing freed pointer.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
@@
struct net_device* dev;
@@
-kfree(dev)
+free_netdev(dev)
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Acked-by: Denis Kirjanov <dkirjanov@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It is not guaranteed that free_netdev() is macro.
Freeing netdev without free_netdev() leads to net, tx leaks.
I might lead to dereferencing freed pointer.
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Acked-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It is not guaranteed that free_netdev() is macro.
Freeing netdev without free_netdev() leads to net, tx leaks.
I might lead to dereferencing freed pointer.
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Freeing netdev without free_netdev() leads to net, tx leaks.
I might lead to dereferencing freed pointer.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
@@
struct net_device* dev;
@@
-kfree(dev)
+free_netdev(dev)
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Freeing netdev without free_netdev() leads to net, tx leaks.
I might lead to dereferencing freed pointer.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
@@
struct net_device* dev;
@@
-kfree(dev)
+free_netdev(dev)
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ft1000_copy_up_pkt() doesn't free skb on errors.
init_ft1000_card() doesn't free netdev with free_netdev() but with kfree().
init_ft1000_card() doesn't check request_region()'s return value
and doesn't free region on error.
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes removes all of the the " ;"'s in the west bridge driver
and instead replaces them with ";" only. Although this is a large patch,
this is the only thing that it does. I can break it up on a file basis
if needed.
Signed-off-by: David Cross <david.cross@cypress.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes the west bridge cyasgadget driver in order to allow for
compilation against the linux-next tree. This changes
usb_gadget_register_driver to usb_gadget_probe_driver and updates this
function based on the new function definition (bind call).
Signed-off-by: David Cross <david.cross@cypress.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This shouldn't have been in the tree, it's generated by the build, so
remove it.
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Eons ago, in a galaxy far far away, Jordan committed code to work around
the fact that X might have put the DCON to sleep and then crashed (in that
galaxy, X crashed a lot; crazy, right?)
This code was based on a custom API. These days, we have code which watches
for FB unblanks, and should perform the same function.. Therefore, the older
code can be dropped. We should probably be watching for CONBLANK events to,
so allow those to turn the DCON back on.
Dropping the old code is necessary for building the driver.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Some additional folks requested to be Cc'd for OLPC-DCON changes; add them
to the TODO file.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This comment about killing power to the backlight is ancient, and incorrect
(the code that follows actually does the opposite of what the comment says).
This was due to hardware changes; the comment was for the original OLPC GX2
boards, but when the OLPC LX boards came out, the code was updated for that
hardware.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add and populate a TODO file for the olpc_dcon driver.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The vx855 stuff isn't upstream yet; for now, drop support for XO-1.5.
This will come back once the 1.5 code is in place (and will be in a form
that allows both 1.0 and 1.5 support to be compiled in at the same time),
but for now just remove it. This is necessary to get the driver building.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
...Rather than macros that don't exist. Necessary for building the
driver.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds DCON support for the OLPC XO. The DCON is found in XO-1 and
XO-1.5 hardware. The XO-1 has a CS5536 southbridge, while the XO-1.5
has a Via chipset; the GPIO magic that's necessary to communicate with
the DCON chip is unfortunately different across both platforms. This
driver supports both.
This driver is in bad state atm, so I'm requesting its inclusion into
staging so it can be cleaned up while staying in the kernel tree.
Original driver by Dave Woodhouse, and modified extensively by
Jordan Crouse, myself, Deepak Saxena, Paul Fox, Daniel Drake, and
probably others that I've missed.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The below patch, is a simple fix to a broken web address not using a period in it's
name.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A single driver shouldn't be overriding the kernel-wide -W options.
This removes them from the Makefile.
Bonus is that the code at least now will build on a 64bit platform.
Problem is that both drivers can't be built at the same time right now
or bad things happen when linking.
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Cc: jason <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Change to use the proper ccflags-y option, as well as splitting the
options out one-per-line so that we can see what is needed to be cleaned
up and removed over time.
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Cc: jason <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The driver hasn't been updated since the .30 kernel release and will
not build due to pcmcia api changes. Mark it broken for now so no
one hits it in their build accidentally.
Cc: Marek Belisko <marek.belisko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes the build for the ft100-usb driver so it builds
properly.
Cc: Marek Belisko <marek.belisko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes up all of the remaining coding style issues that
make any sense to make in the line6 driver.
Cc: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These symbols don't need to be exported as nothing uses them, so don't.
Cc: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As there are symbols that conflict with the in-kernel usb-storage
module, we can't build this into the kernel.
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Al Cho <acho@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The way the event handler works can cause it to delay
events until eventual wakeup for another event.
For example, on device detach (vhci):
- Write to sysfs detach file
-> usbip_event_add(VDEV_EVENT_DOWN)
-> wakeup()
#define VDEV_EVENT_DOWN (USBIP_EH_SHUTDOWN | USBIP_EH_RESET).
- Event thread wakes up and passes the event to
event_handler() to process.
- It processes and clears the USBIP_EH_SHUTDOWN
flag then returns.
- The outer event loop (event_handler_loop()) calls
wait_event_interruptible().
The processing of the second flag which is part of
VDEV_EVENT_DOWN (USBIP_EH_RESET) did not happen yet.
It is delayed until the next event.
This means the ->reset callback may not happen for
a long time (if ever), leaving the usbip port in a
weird state which prevents its reuse.
This patch changes the handler to process all flags
before waiting for another wakeup.
I have verified this change to fix a problem which
prevented reattach of a usbip device. It also helps
for socket errors which missed the RESET as well.
The delayed event processing also affects the stub
side of usbip and the error handling there.
Signed-off-by: Max Vozeler <mvz@vozeler.com>
Reported-by: Marco Lancione <marco@optikam.com>
Tested-by: Luc Jalbert <ljalbert@optikam.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch changes vhci to behave like dummy and
other hcds when disconnecting a device.
Previously detaching a device from the root hub
did not notify the usb core of the disconnect and
left the device visible.
Signed-off-by: Max Vozeler <mvz@vozeler.com>
Reported-by: Marco Lancione <marco@optikam.com>
Tested-by: Luc Jalbert <ljalbert@optikam.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Just fixed all checkpatch's errors but not the warinings.
Signed-off-by: Victor Rosales <victorhrosales@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The w35und uses atomics such as "ThreadCount" and "FireCount" to emulate
locking in the TX paths, for example. Document this bug in the TODO list.
Cc: Lars Lindley <lindley@coyote.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The wbsoft_tx() function is a simple wrapper on top of MLMESendFrame() so
inline the latter to the former.
Cc: Lars Lindley <lindley@coyote.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch changes MLMESendFrame to return NETDEV_TX_BUSY if MLME frame is in
use so that wbsoft_tx() doesn't blindly return NETDEV_TX_OK in that case.
Cc: Sandro Bonazzola <sandro.bonazzola@gmail.com>
Cc: Lars Lindley <lindley@coyote.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes unused fields from "struct wbsoft_priv".
Cc: Lars Lindley <lindley@coyote.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes unused spinlocks from "struct mlme_frame" and "struct
wbsoft_priv".
Cc: Lars Lindley <lindley@coyote.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The mlme_s.h header is included in one place. As the header is very small, just
inline it to core.h.
Cc: Lars Lindley <lindley@coyote.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There's bunch of macros in mlme_s.h that aren't used for anything. Kill them
off.
Cc: Lars Lindley <lindley@coyote.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The scan_s.h header is not actually used for anything so just kill it off.
Cc: Lars Lindley <lindley@coyote.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes remaining typedef declarations from the w35und driver. Most
of them were unused so I just killed them off completely.
Cc: Lars Lindley <lindley@coyote.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fixes an uninitialized variable access in _rx_iq_calibration_loop_winbond():
CC [M] drivers/staging/winbond/phy_calibration.o
drivers/staging/winbond/phy_calibration.c: In function ‘_rx_iq_calibration_loop_winbond’:
drivers/staging/winbond/phy_calibration.c:1138: warning: ‘val’ is used uninitialized in this function
Cc: Lars Lindley <lindley@coyote.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Also remove no unused precision attr.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This has been replaced by a separate _index attribute
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Also fixes a missing NULL to terminate one of the attribute arrays.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As Manuel Stahl observed, putting data into the naming of an attribute
(beyond what it is for) breaks the one value per attribute rule (in spirit
at least). Hence we introduce a separate _index attribute for each scan
element to tell userspace the ordering in output from the buffer.
This will generate a lot of sparse warnings as all drivers will have unused
iio_const_attrs created. The rest of the set will clean these up.
The final patch will remove the old indexing method. It is not here so
as to maintain one or other interface for all devices as this set
progresses.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The job this was intended to do (never implemented) is now done
by explicit definition of _type attributes in all drivers
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The bit depth of 14 for the supply adc on the datasheet is highly
suspicious. Confirmation requested from Analog.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Note some of the in driver type specifications do not match the
data sheet. I am assuming the datasheet is correct. This bug
would not have been apparent in the driver as these values were
unusued.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As both signed and unsigned in attributes exist, each element must
be fully specified.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Also, adds a macro to make defining such attributes simple.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch to the existing bcm80211 directory in the staging tree adds fullmac
driver support for the BCM4329 SDIO chip from Broadcom. Configuration of the
mac80211 driver or the fullmac driver can be done through menuconfig.
Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
move all the header information to ti_wilink_st.h.
This header would then not only serve the local modules like the st_core.c,
st_kim.c and st_ll.c but also the external modules/protocol drivers that are
dependent on the shared transport driver.
Modify the source files to include the new header ti_wilink_st.h,
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vinod Koul