Commit graph

23 commits

Author SHA1 Message Date
David S. Miller
d91aa123b4 [SPARC64]: Fix sparse warnings in arch/sparc64/kernel/irq.c
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-26 00:37:51 -07:00
David S. Miller
d979f1792d [SPARC64]: __inline__ --> inline
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-27 00:13:04 -07:00
David S. Miller
256c1df36b [SPARC64]: virt_irq --> bucket mapping no longer necessary
We used to need this to compute virt_irq --> ino, but that
is no longer necessary.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13 23:50:38 -07:00
David S. Miller
bb74b734a6 [SPARC64]: Kill ugly __irq_ino() macro.
We have a place to stick INO information in the
virt_to_real_irq_table[], which is currently only used for VIRQs.
And that is readily accessible from the one __irq_ino() call site.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13 23:27:48 -07:00
David S. Miller
a650d3839e [SPARC64]: Make IVEC pointers 64-bit.
Currently we chain IVEC entries using 32-bit "pointers"
because we know that the ivector_table is in the main
kernel image, thus below 4GB.

This uses proper 64-bit pointers instead.

Whilst this bloats up the kernel image size, this sets
the infrastructure necessary to significantly shrink the
kernel size by using physical addresses and dynamically
allocating the ivector table.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13 21:53:15 -07:00
David S. Miller
759f89e03c [SPARC64]: Consolidate MSI support code.
This also makes us use the MSI queues correctly.

Each MSI queue is serviced by a normal sun4u/sun4v INO interrupt
handler.  This handler runs the MSI queue and dispatches the
virtual interrupts indicated by arriving MSIs in that MSI queue.

All of the common logic is placed in pci_msi.c, with callbacks to
handle the PCI controller specific aspects of the operations.

This common infrastructure will make it much easier to add MSG
support.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13 21:53:13 -07:00
David S. Miller
9bb3c227c4 [SPARC64]: Enable MSI on sun4u Fire PCI-E controllers.
The support code is identical to the hypervisor sun4v stuff,
just replacing the hypervisor calls with register reads and
writes in the Fire controller.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13 21:53:09 -07:00
David S. Miller
5f92c32936 [SPARC64]: Fix several bugs in MSI handling.
1) sun4{u,v}_build_msi() have improper return value handling.

   We should always return negative error codes, instead of
   using the magic value "0" which could in fact be a valid
   MSI number.

2) sun4{u,v}_build_msi() should return -ENOMEM instead of
   calling prom_prom() halt with kzalloc() of the interrupt
   data fails.

3) We 'remembered' the MSI number using a singleton in the
   struct device archdata area, this doesn't work for MSI-X
   which can cause multiple MSIs assosciated with one device.

   Delete that archdata member, and instead store the MSI
   number in the IRQ chip data area.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-30 23:06:51 -07:00
David S. Miller
6e69d6068c [SPARC64]: Fix type and constant sizes wrt. sun4u IMAP/ICLR handling.
Sometimes we were using 32-bit values and the top bits were
getting inadvertantly chopped off.  This will matter for the
forthcoming Fire controller MSI support.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-30 23:06:50 -07:00
David S. Miller
e0204409df [SPARC64]: dr-cpu unconfigure support.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:05:32 -07:00
David S. Miller
4a907dec98 [SPARC64]: Wire up cookie based sun4v interrupt registry.
This will be used for logical domain channel interrupts.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-13 00:01:04 -07:00
David S. Miller
35a17eb6a8 [SPARC64]: Add PCI MSI support on Niagara.
This is kind of hokey, we could use the hardware provided facilities
much better.

MSIs are assosciated with MSI Queues.  MSI Queues generate interrupts
when any MSI assosciated with it is signalled.  This suggests a
two-tiered IRQ dispatch scheme:

	MSI Queue interrupt --> queue interrupt handler
		MSI dispatch --> driver interrupt handler

But we just get one-level under Linux currently.  What I'd like to do
is possibly stick the IRQ actions into a per-MSI-Queue data structure,
and dispatch them form there, but the generic IRQ layer doesn't
provide a way to do that right now.

So, the current kludge is to "ACK" the interrupt by processing the
MSI Queue data structures and ACK'ing them, then we run the actual
handler like normal.

We are wasting a lot of useful information, for example the MSI data
and address are provided with ever MSI, as well as a system tick if
available.  If we could pass this into the IRQ handler it could help
with certain things, in particular for PCI-Express error messages.

The MSI entries on sparc64 also tell you exactly which bus/device/fn
sent the MSI, which would be great for error handling when no
registered IRQ handler can service the interrupt.

We override the disable/enable IRQ chip methods in sun4v_msi, so we
have to call {mask,unmask}_msi_irq() directly from there.  This is
another ugly wart.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-10 23:50:37 -08:00
Linus Torvalds
be883da759 Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Update defconfig.
  [SPARC64]: Don't double-export synchronize_irq.
  [SPARC64]: Move over to GENERIC_HARDIRQS.
  [SPARC64]: Virtualize IRQ numbers.
  [SPARC64]: Kill ino_bucket->pil
  [SPARC]: Kill __irq_itoa().
  [SPARC64]: bp->pil can never be zero
  [SPARC64]: Send all device interrupts via one PIL.
  [SPARC]: Fix iommu_flush_iotlb end address
  [SPARC]: Mark smp init functions as cpuinit
  [SPARC]: Add missing rw can_lock macros
  [SPARC]: Setup cpu_possible_map
  [SPARC]: Add topology_init()
2006-06-20 17:39:28 -07:00
David S. Miller
e18e2a00ef [SPARC64]: Move over to GENERIC_HARDIRQS.
This is the long overdue conversion of sparc64 over to
the generic IRQ layer.

The kernel image is slightly larger, but the BSS is ~60K
smaller due to the reduced size of struct ino_bucket.

A lot of IRQ implementation details, including ino_bucket,
were moved out of asm-sparc64/irq.h and are now private to
arch/sparc64/kernel/irq.c, and most of the code in irq.c
totally disappeared.

One thing that's different at the moment is IRQ distribution,
we do it at enable_irq() time.  If the cpu mask is ALL then
we round-robin using a global rotating cpu counter, else
we pick the first cpu in the mask to support single cpu
targetting.  This is similar to what powerpc's XICS IRQ
support code does.

This works fine on my UP SB1000, and the SMP build goes
fine and runs on that machine, but lots of testing on
different setups is needed.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-20 01:23:32 -07:00
David S. Miller
8047e247c8 [SPARC64]: Virtualize IRQ numbers.
Inspired by PowerPC XICS interrupt support code.

All IRQs are virtualized in order to keep NR_IRQS from needing
to be too large.  Interrupts on sparc64 are arbitrary 11-bit
values, but we don't need to define NR_IRQS to 2048 if we
virtualize the IRQs.

As PCI and SBUS controller drivers build device IRQs, we divy
out virtual IRQ numbers incrementally starting at 1.  Zero is
a special virtual IRQ used for the timer interrupt.

So device drivers all see virtual IRQs, and all the normal
interfaces such as request_irq(), enable_irq(), etc. translate
that into a real IRQ number in order to configure the IRQ.

At this point knowledge of the struct ino_bucket is almost
entirely contained within arch/sparc64/kernel/irq.c  There are
a few small bits in the PCI controller drivers that need to
be swept away before we can remove ino_bucket's definition
out of asm-sparc64/irq.h and privately into kernel/irq.c

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-20 01:22:35 -07:00
David S. Miller
37cdcd9e82 [SPARC64]: Kill ino_bucket->pil
And reuse that struct member for virt_irq, which will
be used in future changesets for the implementation of
mapping between real and virtual IRQ numbers.

This nicely kills off a ton of SBUS and PCI controller
PIL assignment code which is no longer necessary.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-20 01:21:57 -07:00
David S. Miller
c6387a48cf [SPARC]: Kill __irq_itoa().
This ugly hack was long overdue to die.

It was a way to print out Sparc interrupts in a more freindly format,
since IRQ numbers were arbitrary opaque 32-bit integers which vectored
into PIL levels.  These 32-bit integers were not necessarily in the
0-->NR_IRQS range, but the PILs they vectored to were.

The idea now is that we will increase NR_IRQS a little bit and use a
virtual<-->real IRQ number mapping scheme similar to PowerPC.

That makes this IRQ printing hack irrelevant, and furthermore only a
handful of drivers actually used __irq_itoa() making it even less
useful.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-20 01:21:29 -07:00
David Woodhouse
62c4f0a2d5 Don't include linux/config.h from anywhere else in include/
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-26 12:56:16 +01:00
David S. Miller
ebd8c56c5a [SPARC64]: Fix uniprocessor IRQ targetting on SUN4V.
We need to use the real hardware processor ID when
targetting interrupts, not the "define to 0" thing
the uniprocessor build gives us.

Also, fill in the Node-ID and Agent-ID fields properly
on sun4u/Safari.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 01:13:24 -08:00
David S. Miller
e3999574b4 [SPARC64]: Generic sun4v_build_irq().
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 01:12:40 -08:00
David S. Miller
088dd1f81b [SPARC64]: Add support for IRQ pre-handlers.
This allows a PCI controller to shim into IRQ delivery
so that DMA queues can be drained, if necessary.

If some bus specific code needs to run before an IRQ
handler is invoked, the bus driver simply needs to setup
the function pointer in bucket->irq_info->pre_handler and
the two args bucket->irq_info->pre_handler_arg[12].

The Schizo PCI driver is converted over to use a pre-handler
for the DMA write-sync processing it needs when a device
is behind a PCI->PCI bus deeper than the top-level APB
bridges.

While we're here, clean up all of the action allocation
and handling.  Now, we allocate the irqaction as part of
the bucket->irq_info area.  There is an array of 4 irqaction
(for PCI irq sharing) and a bitmask saying which entries
are active.

The bucket->irq_info is allocated at build_irq() time, not
at request_irq() time.  This simplifies request_irq() and
free_irq() tremendously.

The SMP dynamic IRQ retargetting code got removed in this
change too.  It was disabled for a few months now, and we
can resurrect it in the future if we want.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-04 13:24:38 -07:00
David S. Miller
63b614522c [SPARC64]: Get rid of fast IRQ feature.
The only real user was the assembler floppy interrupt
handler, which does not need to be in assembly.

This makes it so that there are less pieces of code which
know about the internal layout of ivector_table[] and
friends.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-27 17:04:45 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00