Commit graph

300 commits

Author SHA1 Message Date
Jan Blunck
6ac08c39a1 Use struct path in fs_struct
* Use struct path in fs_struct.

Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Jan Blunck <jblunck@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-14 21:13:33 -08:00
Peter Zijlstra
052f1dc7eb sched: rt-group: make rt groups scheduling configurable
Make the rt group scheduler compile time configurable.
Keep it experimental for now.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-13 15:45:40 +01:00
Sam Ravnborg
fab1e310d3 kbuild: fix make V=1
When make -s support were added to filechk to
combination created with make V=1 were not
covered.
Fix it by explicitly cover this case too.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Mike Frysinger <vapier@gentoo.org>
2008-02-11 17:43:54 +01:00
Thomas Gleixner
a03c2a48e0 x86: DEBUG_PAGEALLOC: enable after mem_init()
DEBUG_PAGEALLOC must not be enabled before mem_init(). Before this
point there is nothing to allocate.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-09 23:24:09 +01:00
Ingo Molnar
166124fde9 brk: help text typo fix
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-09 23:24:09 +01:00
Mike Frysinger
d75f4c683f kbuild: silence CHK/UPD messages according to $(quiet)
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-02-09 10:43:58 +01:00
Yinghai Lu
f6f21c8146 Convert loglevel-related kernel boot parameters to early_param
So we can use them for the early console like console=uart8250 or
earlycon=uart8250 or early_printk

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:42 -08:00
Oleg Nesterov
430c623121 start the global /sbin/init with 0,0 special pids
As Eric pointed out, there is no problem with init starting with sid == pgid
== 0, and this was historical linux behavior changed in 2.6.18.

Remove kernel_init()->__set_special_pids(), this is unneeded and complicates
the rules for sys_setsid().

This change and the previous change in daemonize() mean that /sbin/init does
not need the special "session != 1" hack in sys_setsid() any longer. We can't
remove this check yet, we should cleanup copy_process(CLONE_NEWPID) first, so
update the comment only.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:27 -08:00
Oleg Nesterov
8520d7c7f8 teach set_special_pids() to use struct pid
Change set_special_pids() to work with struct pid, not pid_t from global name
space. This again speedups and imho cleanups the code, also a preparation for
the next patch.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:27 -08:00
Pavel Emelyanov
74bd59bb39 namespaces: cleanup the code managed with PID_NS option
Just like with the user namespaces, move the namespace management code into
the separate .c file and mark the (already existing) PID_NS option as "depend
on NAMESPACES"

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Kirill Korotaev <dev@sw.ru>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:23 -08:00
Pavel Emelyanov
aee16ce73c namespaces: cleanup the code managed with the USER_NS option
Make the user_namespace.o compilation depend on this option and move the
init_user_ns into user.c file to make the kernel compile and work without the
namespaces support.  This make the user namespace code be organized similar to
other namespaces'.

Also mask the USER_NS option as "depend on NAMESPACES".

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Kirill Korotaev <dev@sw.ru>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:23 -08:00
Pavel Emelyanov
ae5e1b22f1 namespaces: move the IPC namespace under IPC_NS option
Currently the IPC namespace management code is spread over the ipc/*.c files.
I moved this code into ipc/namespace.c file which is compiled out when needed.

The linux/ipc_namespace.h file is used to store the prototypes of the
functions in namespace.c and the stubs for NAMESPACES=n case.  This is done
so, because the stub for copy_ipc_namespace requires the knowledge of the
CLONE_NEWIPC flag, which is in sched.h.  But the linux/ipc.h file itself in
included into many many .c files via the sys.h->sem.h sequence so adding the
sched.h into it will make all these .c depend on sched.h which is not that
good.  On the other hand the knowledge about the namespaces stuff is required
in 4 .c files only.

Besides, this patch compiles out some auxiliary functions from ipc/sem.c,
msg.c and shm.c files.  It turned out that moving these functions into
namespaces.c is not that easy because they use many other calls and macros
from the original file.  Moving them would make this patch complicated.  On
the other hand all these functions can be consolidated, so I will send a
separate patch doing this a bit later.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Kirill Korotaev <dev@sw.ru>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:23 -08:00
Pavel Emelyanov
58bfdd6dee namespaces: move the UTS namespace under UTS_NS option
Currently all the namespace management code is in the kernel/utsname.c file,
so just compile it out and make stubs in the appropriate header.

The init namespace itself is in init/version.c and is in the kernel all the
time.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Kirill Korotaev <dev@sw.ru>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:23 -08:00
Pavel Emelyanov
c5289a6949 namespaces: add the NAMESPACES config option
The option is selectable if EMBEDDED is chosen only.  When the EMBEDDED is off
namespaces will be on.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Kirill Korotaev <dev@sw.ru>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:23 -08:00
Linus Torvalds
f0f1b3364a Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (112 commits)
  ACPI: fix build warning
  Revert "cpuidle: build fix for non-x86"
  ACPI: update intrd DSDT override console messages
  ACPI: update DSDT override documentation
  ACPI: Add "acpi_no_initrd_override" kernel parameter
  ACPI: its a directory not a folder....
  ACPI: misc cleanups
  ACPI: add missing prink prefix strings
  ACPI: cleanup acpi.h
  ACPICA: fix CONFIG_ACPI_DEBUG_FUNC_TRACE build
  ACPI: video: Ignore ACPI video devices that aren't present in hardware
  ACPI: video: reset brightness on resume
  ACPI: video: call ACPI notifier chain for ACPI video notifications
  ACPI: create notifier chain to get hotkey events to graphics driver
  ACPI: video: delete unused display switch on hotkey event code
  ACPI: video: create "brightness_switch_enabled" modparam
  cpuidle: Add a poll_idle method
  ACPI: cpuidle: Support C1 idle time accounting
  ACPI: enable MWAIT for C1 idle
  ACPI: idle: Fix acpi_safe_halt usages and interrupt enabling/disabling
  ...
2008-02-07 09:45:58 -08:00
Balbir Singh
8cdea7c054 Memory controller: cgroups setup
Setup the memory cgroup and add basic hooks and controls to integrate
and work with the cgroup.

Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Pavel Emelianov <xemul@openvz.org>
Cc: Paul Menage <menage@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Kirill Korotaev <dev@sw.ru>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: David Rientjes <rientjes@google.com>
Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:18 -08:00
Pavel Emelianov
e552b66170 Memory controller: resource counters
With fixes from David Rientjes <rientjes@google.com>

Introduce generic structures and routines for resource accounting.

Each resource accounting cgroup is supposed to aggregate it,
cgroup_subsystem_state and its resource-specific members within.

Signed-off-by: Pavel Emelianov <xemul@openvz.org>
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Kirill Korotaev <dev@sw.ru>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Pavel Emelianov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:18 -08:00
Markus Gaugusch
71fc47a9ad ACPI: basic initramfs DSDT override support
The basics of DSDT from initramfs. In case this option is selected,
populate_rootfs() is called a bit earlier to have the initramfs content
available during ACPI initialization.

This is a very similar path to the one available at
http://gaugusch.at/kernel.shtml but with some update in the
documentation, default set to No and the change of populate_rootfs() the
"Jeff Mahony way" (which avoids reading the initramfs twice).

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-06 22:07:41 -05:00
Linus Torvalds
3e6bdf473f Merge git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86:
  x86: fix deadlock, make pgd_lock irq-safe
  virtio: fix trivial build bug
  x86: fix mttr trimming
  x86: delay CPA self-test and repeat it
  x86: fix 64-bit sections
  generic: add __FINITDATA
  x86: remove suprious ifdefs from pageattr.c
  x86: mark the .rodata section also NX
  x86: fix iret exception recovery on 64-bit
  cpuidle: dubious one-bit signed bitfield in cpuidle.h
  x86: fix sparse warnings in powernow-k8.c
  x86: fix sparse error in traps_32.c
  x86: trivial sparse/checkpatch in quirks.c
  x86 ptrace: disallow null cs/ss
  MAINTAINERS: RDC R-321x SoC maintainer
  brk randomization: introduce CONFIG_COMPAT_BRK
  brk: check the lower bound properly
  x86: remove X2 workaround
  x86: make spurious fault handler aware of large mappings
  x86: make traps on entry code be debuggable in user space, 64-bit
2008-02-06 13:54:09 -08:00
Ingo Molnar
32a932332c brk randomization: introduce CONFIG_COMPAT_BRK
based on similar patch from: Pavel Machek <pavel@ucw.cz>

Introduce CONFIG_COMPAT_BRK. If disabled then the kernel is free
(but not obliged to) randomize the brk area.

Heap randomization breaks ancient binaries, so we keep COMPAT_BRK
enabled by default.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-06 22:39:44 +01:00
Adrian Bunk
6c81c32f96 calibrate_delay() must be __cpuinit
calibrate_delay() must be __cpuinit, not __{dev,}init.

I've verified that this is correct for all users.

While doing the latter, I also did the following cleanups:
- remove pointless additional prototypes in C files
- ensure all users #include <linux/delay.h>

This fixes the following section mismatches with CONFIG_HOTPLUG=n,
CONFIG_HOTPLUG_CPU=y:

WARNING: vmlinux.o(.text+0x1128d): Section mismatch: reference to .init.text.1:calibrate_delay (between 'check_cx686_slop' and 'set_cx86_reorder')
WARNING: vmlinux.o(.text+0x25102): Section mismatch: reference to .init.text.1:calibrate_delay (between 'smp_callin' and 'cpu_coregroup_map')

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Christian Zankel <chris@zankel.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:08 -08:00
Robert P. J. Day
b25b7819e5 Remove superfluous checks for CONFIG_BLK_DEV_INITRD from initramfs.c
Given that init/Makefile includes initramfs.c in the build only if
CONFIG_BLK_DEV_INITRD is defined, there seems to be no point checking for
it yet again.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:06 -08:00
Adrian Bunk
011e3fcd1e proper prototype for get_filesystem_list()
Ad a proper prototype for migration_init() in include/linux/fs.h

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:02 -08:00
Adrian Bunk
a1c9eea9e5 proper prototype for signals_init()
Add a proper prototype for signals_init() in include/linux/signal.h

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:02 -08:00
Andrew Morton
941e492bdb read_current_timer() cleanups
- All implementations can be __devinit

- The function prototypes were in asm/timex.h but they all must be the same,
  so create a single declaration in linux/timex.h.

- uninline the sparc64 version to match the other architectures

- Don't bother #defining ARCH_HAS_READ_CURRENT_TIMER to a particular value.

[ezk@cs.sunysb.edu: fix build]
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:02 -08:00
Matt Mackall
3729145821 slob: correct Kconfig description
Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:19 -08:00
Matt Mackall
1e88328111 maps4: make page monitoring /proc file optional
Make /proc/ page monitoring configurable

This puts the following files under an embedded config option:

/proc/pid/clear_refs
/proc/pid/smaps
/proc/pid/pagemap
/proc/kpagecount
/proc/kpageflags

[akpm@linux-foundation.org: Kconfig fix]
Signed-off-by: Matt Mackall <mpm@selenic.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:17 -08:00
Davide Libenzi
f79c343e2e timerfd: un-break CONFIG_TIMERFD
Remove the broken status to CONFIG_TIMERFD.

Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:07 -08:00
Mathieu Desnoyers
125e564582 Move Kconfig.instrumentation to arch/Kconfig and init/Kconfig
Move the instrumentation Kconfig to

arch/Kconfig for architecture dependent options
  - oprofile
  - kprobes

and

init/Kconfig for architecture independent options
  - profiling
  - markers

Remove the "Instrumentation Support" menu. Everything moves to "General setup".
Delete the kernel/Kconfig.instrumentation file.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-02-03 08:58:08 +01:00
Mathieu Desnoyers
fb32e03fdc Create arch/Kconfig
Puts the content of arch/Kconfig in the "General setup" menu.

Linus:

> Should it come with a re-duplication of it's content into each
> architecture, which was the case previously ? The oprofile and kprobes
> menu entries were litteraly cut and pasted from one architecture to
> another. Should we put its content in init/Kconfig then ?

I don't think it's a good idea to go back to making it per-architecture,
although that extensive "depends on <list-of-archiectures-here>" might
indicate that there certainly is room for cleanup there.

And I don't think it's wrong keeping it in kernel/Kconfig.xyz per se, I
just think it's wrong to (a) lump the code together when it really doesn't
necessarily need to and (b) show it to users as some kind of choice that
is tied together (whether it then has common code or not).

On the per-architecture side, I do think it would be better to *not* have
internal architecture knowledge in a generic file, and as such a line like

        depends on X86_32 || IA64 || PPC || S390 || SPARC64 || X86_64 || AVR32

really shouldn't exist in a file like kernel/Kconfig.instrumentation.

It would be much better to do

        depends on ARCH_SUPPORTS_KPROBES

in that generic file, and then architectures that do support it would just
have a

        bool ARCH_SUPPORTS_KPROBES
                default y

in *their* architecture files. That would seem to be much more logical,
and is readable both for arch maintainers *and* for people who have no
clue - and don't care - about which architecture is supposed to support
which interface...

Sam Ravnborg:

Stuff it into a new file: arch/Kconfig
We can then extend this file to include all the 'trailing'
Kconfig things that are anyway equal for all ARCHs.

But it should be kept clean - so if we introduce such a file
then we should use ARCH_HAS_whatever in the arch specific Kconfig
files to enable stuff that is not shared.

[...]

The above suggestion is actually not exactly the best way to do it...
First the naming..
A quick grep shows following usage today (in Kconfig files)
ARCH_HAS        51
ARCH_SUPPORTS   4
HAVE_ARCH       7

ARCH_HAS is the clear winner.

In the common Kconfig file do:

config FOO
        depends on ARCH_HAS_FOO
        bool "bla bla"

config ARCH_HAS_FOO
        def_bool n

In the arch specific Kconfig file in a suitable place do:

config SUITABLE_OPTION
        select ARCH_HAS_FOO

The naming of ARCH_HAS_ is fixed and shall be:
ARCH_HAS_<config option it will enable>

Only a single line added pr. architecture.
And we will end up with a (maybe even commented) list of trivial selects.

- Yet another update :

Moving to HAVE_* now.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-02-03 08:58:07 +01:00
Paul E. McKenney
095031052b RCU: add help text for "RCU implementation type"
This patch supplies help text for the "RCU implementation type"
kernel configuration choice.

Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-31 22:45:22 +01:00
Ingo Molnar
12d6f21eac x86: do not PSE on CONFIG_DEBUG_PAGEALLOC=y
get more testing of the c_p_a() code done by not turning off
PSE on DEBUG_PAGEALLOC.

this simplifies the early pagetable setup code, and tests
the largepage-splitup code quite heavily.

In the end, all the largepages will be split up pretty quickly,
so there's no difference to how DEBUG_PAGEALLOC worked before.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:58 +01:00
Mike Travis
dd5af90a7f x86/non-x86: percpu, node ids, apic ids x86.git fixup
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:32 +01:00
Andi Kleen
ca74a6f84e x86: optimize lock prefix switching to run less frequently
On VMs implemented using JITs that cache translated code changing the lock
prefixes is a quite costly operation that forces the JIT to throw away and
retranslate a lot of code.

Previously a SMP kernel would rewrite the locks once for each CPU which
is quite unnecessary. This patch changes the code to never switch at boot in
 the normal case (SMP kernel booting with >1 CPU) or only once for SMP kernel
on UP.

This makes a significant difference in boot up performance on AMD SimNow!
Also I expect it to be a little faster on native systems too because a smp
switch does a lot of text_poke()s which each synchronize the pipeline.

v1->v2: Rename max_cpus
v1->v2: Fix off by one in UP check (Thomas Gleixner)

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:17 +01:00
travis@sgi.com
b32ef636a5 percpu: use a kconfig variable to signal arch specific percpu setup
The use of the __GENERIC_PERCPU is a bit problematic since arches
may want to run their own percpu setup while using the generic
percpu definitions. Replace it through a kconfig variable.

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:32:51 +01:00
Roman Zippel
80daa56008 kconfig: use environment option
Use the environment option to provide the ARCH symbol
and the KERNELVERSION symbol.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:39 +01:00
Yuichi Nakamura
1322b9def9 sh: syscall audit support.
Support syscall auditing..

Signed-off-by: Yuichi Nakamura <ynakam@hitachisoft.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:57 +09:00
Paul E. McKenney
e260be673a Preempt-RCU: implementation
This patch implements a new version of RCU which allows its read-side
critical sections to be preempted. It uses a set of counter pairs
to keep track of the read-side critical sections and flips them
when all tasks exit read-side critical section. The details
of this implementation can be found in this paper -

	http://www.rdrop.com/users/paulmck/RCU/OLSrtRCU.2006.08.11a.pdf

and the article-

	http://lwn.net/Articles/253651/

This patch was developed as a part of the -rt kernel development and
meant to provide better latencies when read-side critical sections of
RCU don't disable preemption.  As a consequence of keeping track of RCU
readers, the readers have a slight overhead (optimizations in the paper).
This implementation co-exists with the "classic" RCU implementations
and can be switched to at compiler.

Also includes RCU tracing summarized in debugfs.

[ akpm@linux-foundation.org: build fixes on non-preempt architectures ]

Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com>
Signed-off-by: Paul E. McKenney <paulmck@us.ibm.com>
Reviewed-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 21:08:24 +01:00
Gautham R Shenoy
d221938c04 cpu-hotplug: refcount based cpu hotplug
This patch implements a Refcount + Waitqueue based model for
cpu-hotplug.

Now, a thread which wants to prevent cpu-hotplug, will bump up a global
refcount and the thread which wants to perform a cpu-hotplug operation
will block till the global refcount goes to zero.

The readers, if any, during an ongoing cpu-hotplug operation are blocked
until the cpu-hotplug operation is over.

Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Paul Jackson <pj@sgi.com> [For !CONFIG_HOTPLUG_CPU ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 21:08:01 +01:00
Linus Torvalds
b47711bfbc Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
  selinux: make mls_compute_sid always polyinstantiate
  security/selinux: constify function pointer tables and fields
  security: add a secctx_to_secid() hook
  security: call security_file_permission from rw_verify_area
  security: remove security_sb_post_mountroot hook
  Security: remove security.h include from mm.h
  Security: remove security_file_mmap hook sparse-warnings (NULL as 0).
  Security: add get, set, and cloning of superblock security information
  security/selinux: Add missing "space"
2008-01-25 08:44:29 -08:00
Randy Dunlap
9148fe8767 sysfs: make SYSFS_DEPRECATED depend on SYSFS
Make SYSFS_DEPRECATED depend on SYSFS since files that check
CONFIG_SYSFS_DEPRECATED don't check for CONFIG_SYSFS first.
Also don't prompt user about SYSFS_DEPRECATED if SYSFS=n.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:41 -08:00
Kay Sievers
edfaa7c365 Driver core: convert block from raw kobjects to core devices
This moves the block devices to /sys/class/block. It will create a
flat list of all block devices, with the disks and partitions in one
directory. For compatibility /sys/block is created and contains symlinks
to the disks.

  /sys/class/block
  |-- sda -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda
  |-- sda1 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda1
  |-- sda10 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda10
  |-- sda5 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda5
  |-- sda6 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda6
  |-- sda7 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda7
  |-- sda8 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda8
  |-- sda9 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda9
  `-- sr0 -> ../../devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0

  /sys/block/
  |-- sda -> ../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda
  `-- sr0 -> ../devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:36 -08:00
H. Peter Anvin
bced95283e security: remove security_sb_post_mountroot hook
The security_sb_post_mountroot() hook is long-since obsolete, and is
fundamentally broken: it is never invoked if someone uses initramfs.
This is particularly damaging, because the existence of this hook has
been used as motivation for not using initramfs.

Stephen Smalley confirmed on 2007-07-19 that this hook was originally
used by SELinux but can now be safely removed:

     http://marc.info/?l=linux-kernel&m=118485683612916&w=2

Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Cc: Eric Paris <eparis@parisplace.org>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-01-25 11:29:50 +11:00
Linus Torvalds
158a962422 Unify /proc/slabinfo configuration
Both SLUB and SLAB really did almost exactly the same thing for
/proc/slabinfo setup, using duplicate code and per-allocator #ifdef's.

This just creates a common CONFIG_SLABINFO that is enabled by both SLUB
and SLAB, and shares all the setup code.  Maybe SLOB will want this some
day too.

Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-02 13:04:48 -08:00
Len Brown
982286d1b8 Pull bugzilla-9345 into release branch 2007-12-06 16:52:00 -05:00
Srivatsa Vaddagiri
d842de871c sched: cpu accounting controller (V2)
Commit cfb5285660 removed a useful feature for
us, which provided a cpu accounting resource controller.  This feature would be
useful if someone wants to group tasks only for accounting purpose and doesnt
really want to exercise any control over their cpu consumption.

The patch below reintroduces the feature. It is based on Paul Menage's
original patch (Commit 62d0df6406), with
these differences:

        - Removed load average information. I felt it needs more thought (esp
	  to deal with SMP and virtualized platforms) and can be added for
	  2.6.25 after more discussions.
        - Convert group cpu usage to be nanosecond accurate (as rest of the cfs
	  stats are) and invoke cpuacct_charge() from the respective scheduler
	  classes
	- Make accounting scalable on SMP systems by splitting the usage
	  counter to be per-cpu
	- Move the code from kernel/cpu_acct.c to kernel/sched.c (since the
	  code is not big enough to warrant a new file and also this rightly
	  needs to live inside the scheduler. Also things like accessing
	  rq->lock while reading cpu usage becomes easier if the code lived in
	  kernel/sched.c)

The patch also modifies the cpu controller not to provide the same accounting
information.

Tested-by: Balbir Singh <balbir@linux.vnet.ibm.com>

 Tested the patches on top of 2.6.24-rc3. The patches work fine. Ran
 some simple tests like cpuspin (spin on the cpu), ran several tasks in
 the same group and timed them. Compared their time stamps with
 cpuacct.usage.

Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-12-02 20:04:49 +01:00
Rafael J. Wysocki
8baabde66c Freezer: Fix s2disk resume from initrd
Add appropriate freezer annotations to handle_initrd(), so that it's possible
to resume from disk from an initrd.

http://bugzilla.kernel.org/show_bug.cgi?id=9345

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Nigel Cunningham <nigel@nigel.suspend2.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Chris Friedhoff <chris@friedhoff.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-20 22:22:42 -05:00
Mike Frysinger
529a73fbae Blackfin arch: punt CONFIG_BFIN -- we already have CONFIG_BLACKFIN
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-23 14:28:44 +08:00
Eric W. Biederman
57d5f66b86 pidns: Place under CONFIG_EXPERIMENTAL
This is my trivial patch to swat innumerable little bugs with a single
blow.

After some intensive review (my apologies for not having gotten to this
sooner) what we have looks like a good base to build on with the current
pid namespace code but it is not complete, and it is still much to simple
to find issues where the kernel does the wrong thing outside of the initial
pid namespace.

Until the dust settles and we are certain we have the ABI and the
implementation is as correct as humanly possible let's keep process ID
namespaces behind CONFIG_EXPERIMENTAL.

Allowing us the option of fixing any ABI or other bugs we find as long as
they are minor.

Allowing users of the kernel to avoid those bugs simply by ensuring their
kernel does not have support for multiple pid namespaces.

[akpm@linux-foundation.org: coding-style cleanups]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Adrian Bunk <bunk@kernel.org>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Kir Kolyshkin <kir@swsoft.com>
Cc: Kirill Korotaev <dev@sw.ru>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:43 -08:00
Andrew Morton
cfb5285660 revert "Task Control Groups: example CPU accounting subsystem"
Revert 62d0df6406.

This was originally intended as a simple initial example of how to create a
control groups subsystem; it wasn't intended for mainline, but I didn't make
this clear enough to Andrew.

The CFS cgroup subsystem now has better functionality for the per-cgroup usage
accounting (based directly on CFS stats) than the "usage" status file in this
patch, and the "load" status file is rather simplistic - although having a
per-cgroup load average report would be a useful feature, I don't believe this
patch actually provides it.  If it gets into the final 2.6.24 we'd probably
have to support this interface for ever.

Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:40 -08:00