Commit graph

2130 commits

Author SHA1 Message Date
Finn Thain
429dbf53bc m68k: machw.h cleanup
Remove some more cruft from machw.h and drop the #include where it isn't
needed.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2008-12-28 20:00:03 +01:00
Julia Lawall
9ecab6e5bf drivers/ide/{cs5530.c,sc1200.c}: Move a dereference below a NULL test
In each case, if the NULL test is necessary, then the dereference should be
moved below the NULL test.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
type T;
expression E;
identifier i,fld;
statement S;
@@

- T i = E->fld;
+ T i;
  ... when != E
      when != i
  if (E == NULL) S
+ i = E->fld;
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-22 23:05:06 +01:00
Robin Holt
ecdbc6906e [IA64] Clear up section mismatch for ioc4_ide_attach_one.
The generic_defconfig has three section mismatches.  This clears up
ioc4_ide_attach_one().

Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Mike Reid <mdr@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-12-09 10:08:48 -08:00
Bartlomiej Zolnierkiewicz
5384657479 ide: build-fix for CONFIG_BLK_DEV_IDEDMA_PMAC=n
IDE pmac host driver build fails with CONFIG_BLK_DEV_IDEDMA_PMAC=n
as reported by Kamalesh:

> drivers/ide/pmac.c: In function 'pmac_ide_set_pio_mode':
> drivers/ide/pmac.c:527: error: implicit declaration of function 'kauai_lookup_timing'
> drivers/ide/pmac.c:527: error: 'shasta_pio_timings' undeclared (first use in this function)
> drivers/ide/pmac.c:527: error: (Each undeclared identifier is reported only once
> drivers/ide/pmac.c:527: error: for each function it appears in.)
> drivers/ide/pmac.c:534: error: 'kauai_pio_timings' undeclared (first use in this function)
> drivers/ide/pmac.c: In function 'pmac_ide_do_resume':
> drivers/ide/pmac.c:914: error: 'IDE_WAKEUP_DELAY' undeclared (first use in this function)
> drivers/ide/pmac.c: At top level:
> drivers/ide/pmac.c:1007: error: 'pmac_ide_init_dma' undeclared here (not in a function)
> drivers/ide/pmac.c: In function 'pmac_ide_setup_device':
> drivers/ide/pmac.c:1107: error: 'IDE_WAKEUP_DELAY' undeclared (first use in this function)
> drivers/ide/pmac.c: In function 'pmac_ide_macio_attach':
> drivers/ide/pmac.c:1209: error: 'pmac_ide_hwif_t' has no member named 'dma_regs'
> drivers/ide/pmac.c:1210: error: 'pmac_ide_hwif_t' has no member named 'dma_regs'
> make[2]: *** [drivers/ide/pmac.o] Error 1

Fix it by removing the superfluous config option.

Reported-and-tested-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-08 17:52:05 +01:00
Bartlomiej Zolnierkiewicz
1a659880ee Revert "ide: respect current DMA setting during resume"
This reverts commit e9eb838830 since
it could break resume (thanks to Paul Collins for the report).

I'll look into sorting this out properly for 2.6.29
but for 2.6.28 it is the best to just revert my patch.

Reported-by: Paul Collins <paul@burly.ondioline.org>
Cc: rjw@sisk.pl
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-08 17:42:35 +01:00
Hannes Eder
95964018d5 alim15x3: fix sparse warning
Fix this sparse warning:

  drivers/ide/alim15x3.c:594:2: warning: returning void-valued expression

Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-02 20:40:04 +01:00
Bartlomiej Zolnierkiewicz
a3663801b1 ide: remove dead code from drive_is_ready()
We guarantee 400ns delay at the time of issuing the command.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-02 20:40:04 +01:00
Bartlomiej Zolnierkiewicz
6b7d8fc362 ide: fix build for DEBUG_PM
Also while at it:

* Drop unused arguments from ide_complete_power_step().

* Move DEBUG_PM printk() from ide_end_drive_cmd() to
  ide_complete_power_step().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-02 20:40:03 +01:00
Bartlomiej Zolnierkiewicz
e9eb838830 ide: respect current DMA setting during resume
Respect current DMA setting during resume, otherwise PIO timings
may get destroyed if host uses shared PIO/MWDMA timings.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-02 20:40:03 +01:00
Bartlomiej Zolnierkiewicz
c7b997b372 ide: add SAMSUNG SP0822N with firmware WA100-10 to ivb_list[]
Should fix kernel.org bug #10225:
http://bugzilla.kernel.org/show_bug.cgi?id=10225

Reported-by: Matthias B. <haferfrost@web.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Sergei Shtyltov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-02 20:40:03 +01:00
Bartlomiej Zolnierkiewicz
6636487e8d amd74xx: workaround unreliable AltStatus register for nVidia controllers
It seems that on some nVidia controllers using AltStatus register
can be unreliable so default to Status register if the PCI device
is in Compatibility Mode.  In order to achieve this:

* Add ide_pci_is_in_compatibility_mode() inline helper to <linux/ide.h>.

* Add IDE_HFLAG_BROKEN_ALTSTATUS host flag and set it in amd74xx host
  driver for nVidia controllers in Compatibility Mode.

* Teach actual_try_to_identify() and drive_is_ready() about the new flag.

This fixes the regression caused by removal of CONFIG_IDEPCI_SHARE_IRQ
config option in 2.6.25 and using AltStatus register unconditionally when
available (kernel.org bugs #11659 and #10216).

[ Moreover for CONFIG_IDEPCI_SHARE_IRQ=y (which is what most people
  and distributions use) it never worked correctly. ]

Thanks to Remy LABENE and Lars Winterfeld for help with debugging the problem.

More info at:
http://bugzilla.kernel.org/show_bug.cgi?id=11659
http://bugzilla.kernel.org/show_bug.cgi?id=10216

Reported-by: Remy LABENE <remy.labene@free.fr>
Tested-by: Remy LABENE <remy.labene@free.fr>
Tested-by: Lars Winterfeld <lars.winterfeld@tu-ilmenau.de>
Acked-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-02 20:40:03 +01:00
Michael Schmitz
f9e3326dce ide: fix the ide_release_lock imbalance
ide_release_lock() spits out lots of:

	ide_release_lock: bug

warnings on Atari Falcon.

Fix the ide_release_lock imbalance.

Signed-off-by: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-02 20:40:02 +01:00
Al Viro
d16d7667f9 icside section warnings
icside_register_v[56] is called from (__devinit) icside_probe

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-30 10:03:36 -08:00
Linus Torvalds
d659fc14cb Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  pcmcia: ensure correct logging in do_io_probe
  pcmcia: add another pata/ide ID
  pcmcia: add braces in error path
  pcmcia: struct device - replace bus_id with dev_name(), dev_set_name()
  pcmcia: setup resource information for pseudo multifunction devices.
  pcmcia: fix indentation & braces disagreement - add braces
2008-11-15 18:58:37 -08:00
Marc Pignat
980fc29f20 pcmcia: add another pata/ide ID
Support for Apacer photo steno pro card.

Signed-off-by: Marc Pignat <marc.pignat@hevs.ch>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
CC: Alan Cox <alan@lxorguk.ukuu.org.uk
CC: linux-ide@vger.kernel.org
2008-11-09 21:35:36 +01:00
Borislav Petkov
52ebb438e9 ide-gd: re-get capacity on revalidate
We need to re-get a removable media's capacity when revalidating the
disk so that its partitions get rescanned by the block layer.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: axboe@kernel.dk
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-11-02 21:40:10 +01:00
Atsushi Nemoto
7afa05350c tx4938ide: Avoid underflow on calculation of a wait cycle
Make 'wt' variable signed while it can be negative during calculation.

Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: sshtylyov@ru.mvista.com
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-11-02 21:40:10 +01:00
Atsushi Nemoto
9d4eb0a33e tx4938ide: Do not call devm_ioremap for whole 128KB
Call devm_ioremap() for CS0 and CS1 separetely.
And some style cleanups.

Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: ralf@linux-mips.org
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-11-02 21:40:09 +01:00
Atsushi Nemoto
630a8b2500 tx4938ide: Check minimum cycle time and SHWT range (v2)
SHWT value is used as address valid to -CSx assertion and -CSx to -DIOx
assertion setup time, and contrarywise, -DIOx to -CSx release and -CSx
release to address invalid hold time, so it actualy applies 4 times and
so constitutes -DIOx recovery time.  Check requirement of the recovery
time and cycle time.  Also check SHWT maximum value.

Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: ralf@linux-mips.org
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-11-02 21:40:09 +01:00
Alan Cox
ccd32e221c ide: Switch to a common address
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-11-02 21:40:08 +01:00
Borislav Petkov
9bd27cba1a ide-cd: fix DMA alignment regression
e5318b531b ("ide: use the dma safe check for
REQ_TYPE_ATA_PC") introduced a regression which caused some ATAPI drives to
turn off DMA for REQ_TYPE_BLOCK_PC commands while burning and thus degrading
performance and ultimately causing an excessive amount of underruns.

The issue is documented also in:
http://bugzilla.kernel.org/show_bug.cgi?id=11742.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: Valerio Passini <valerio.passini@unicam.it>
[bart: fixup patch description per comments from Sergei Shtylyov]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-11-02 21:40:07 +01:00
Al Viro
1137fb6704 arm ide breakage
a) semicolon before the function body is a bad idea
b) it's const struct foo, not struct const foo
c) incidentally, it's ecard_remove_driver(), not ecard_unregister_driver()
d) compiling is occasionally useful.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-26 09:35:05 -07:00
Bartlomiej Zolnierkiewicz
fa3fd7204e ide: drivers/ide/generic.c -> drivers/ide/ide-pci-generic.c
Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23 23:24:20 +02:00
Bartlomiej Zolnierkiewicz
c77380d453 ide-disk: set non-rotational queue flag for SSD and CF devices
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23 23:22:09 +02:00
Márton Németh
64c2eae225 ide-cd: add TEAC CD-224E to the NO_AUTOCLOSE list
The "TEAC CD-ROM CD-224E" cannot close its tray, so add it to the NO_AUTOCLOSE
list. This will correct the "Can close tray" field of /proc/sys/dev/cdrom/info.

Signed-off-by: Márton Németh <nm127@freemail.hu>
Acked-by: Borislav Petkov <petkovbb@gmail.com>
[bart: minor fixups to patch description]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23 23:22:09 +02:00
Atsushi Nemoto
28502848f5 ide: Add tx4938ide driver (v2)
This is the driver for the Toshiba TX4938 SoC EBUS controller ATA mode.
It has custom set_pio_mode and some hacks for big endian.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: ralf@linux-mips.org
Cc: sshtylyov@ru.mvista.com
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23 23:22:08 +02:00
Atsushi Nemoto
3789798923 ide: Add tx4939ide driver (v6)
This is the driver for the Toshiba TX4939 SoC ATA controller.

This controller has standard ATA taskfile registers and DMA
command/status registers, but the register layout is swapped on big
endian.  There are some other endian issue and some special registers
which requires many custom dma_ops/tp_ops routines and build_dmatable.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: ralf@linux-mips.org
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23 23:22:07 +02:00
Arjan van de Ven
1f1ab2745b ide: two more pci_ioremap_bar() conversions
based on suggestion from Sergei Shtylyov, there are two more places
where using pci_ioremap_bar() makes sense.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23 23:22:07 +02:00
Arjan van de Ven
283435621a pci: use pci_ioremap_bar() in drivers/ide
Use the newly introduced pci_ioremap_bar() function in drivers/ide.
pci_ioremap_bar() just takes a pci device and a bar number, with the goal
of making it really hard to get wrong, while also having a central place
to stick sanity checks.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23 23:22:07 +02:00
Sergei Shtylyov
95a84cd192 sgiioc4: use ide_host_add() (take 2)
Convert the driver to use ide_host_add() -- this seems to be a straightforward
change which I'm not sure why hasn't been done yet...

While doing this at last, get rid of:

- useless local copy of the 'sgiioc4_port_info' variable;

- unnecessary 'goto' and label...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: jeremy@sgi.com
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23 23:22:06 +02:00
Sergei Shtylyov
3059ef99a1 sgiioc4: fix error cleanup path (take 2)
The driver "forgot" to call iounmap() iff request_mem_region() call failed in
sgiioc4_ide_setup_pci_device()...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: jeremy@sgi.com
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23 23:22:06 +02:00
Linus Torvalds
2248485640 Merge git://git.kernel.org/pub/scm/linux/kernel/git/viro/bdev
* git://git.kernel.org/pub/scm/linux/kernel/git/viro/bdev: (66 commits)
  [PATCH] kill the rest of struct file propagation in block ioctls
  [PATCH] get rid of struct file use in blkdev_ioctl() BLKBSZSET
  [PATCH] get rid of blkdev_locked_ioctl()
  [PATCH] get rid of blkdev_driver_ioctl()
  [PATCH] sanitize blkdev_get() and friends
  [PATCH] remember mode of reiserfs journal
  [PATCH] propagate mode through swsusp_close()
  [PATCH] propagate mode through open_bdev_excl/close_bdev_excl
  [PATCH] pass fmode_t to blkdev_put()
  [PATCH] kill the unused bsize on the send side of /dev/loop
  [PATCH] trim file propagation in block/compat_ioctl.c
  [PATCH] end of methods switch: remove the old ones
  [PATCH] switch sr
  [PATCH] switch sd
  [PATCH] switch ide-scsi
  [PATCH] switch tape_block
  [PATCH] switch dcssblk
  [PATCH] switch dasd
  [PATCH] switch mtd_blkdevs
  [PATCH] switch mmc
  ...
2008-10-23 10:23:07 -07:00
Bartlomiej Zolnierkiewicz
2bfba3c444 ide: remove useless subdirs from drivers/ide/
Suggested-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-21 20:57:23 +02:00
Al Viro
a4600f8139 [PATCH] switch ide-tape
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:48:27 -04:00
Al Viro
b2f21e057d [PATCH] switch ide-gd
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:48:25 -04:00
Al Viro
488ca606f1 [PATCH] switch ide-cd
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:48:23 -04:00
Al Viro
d4430d62fa [PATCH] beginning of methods conversion
To keep the size of changesets sane we split the switch by drivers;
to keep the damn thing bisectable we do the following:
	1) rename the affected methods, add ones with correct
prototypes, make (few) callers handle both.  That's this changeset.
	2) for each driver convert to new methods.  *ALL* drivers
are converted in this series.
	3) kill the old (renamed) methods.

Note that it _is_ a flagday; all in-tree drivers are converted and by the
end of this series no trace of old methods remain.  The only reason why
we do that this way is to keep the damn thing bisectable and allow per-driver
debugging if anything goes wrong.

New methods:
	open(bdev, mode)
	release(disk, mode)
	ioctl(bdev, mode, cmd, arg)		/* Called without BKL */
	compat_ioctl(bdev, mode, cmd, arg)
	locked_ioctl(bdev, mode, cmd, arg)	/* Called with BKL, legacy */

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:32 -04:00
Al Viro
badf8082c3 [PATCH] switch ide_disk_ops ->ioctl() to sane prototype
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:30 -04:00
Al Viro
bbc1cc9784 [PATCH] switch cdrom_{open,release,ioctl} to sane APIs
... convert to it in callers

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:22 -04:00
Al Viro
1bddd9e645 [PATCH] lose the unused file argument in generic_ide_ioctl()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:16 -04:00
Al Viro
74f3c8aff3 [PATCH] switch scsi_cmd_ioctl() to passing fmode_t
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:14 -04:00
Al Viro
86d434dede [PATCH] eliminate use of ->f_flags in block methods
store needed information in f_mode

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:08 -04:00
Al Viro
aeb5d72706 [PATCH] introduce fmode_t, do annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:06 -04:00
Linus Torvalds
72558dde73 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (36 commits)
  ide: re-add TRM290 fix lost during ide_build_dmatable() cleanup
  scc_pata: kill unused variables
  sgiioc4: kill duplicate ioremap()
  sgiioc4: kill useless address checks
  delkin_cb: add PM support
  ide: remove broken hpt34x driver
  ide-floppy: remove idefloppy_floppy_t typedef
  sgiioc4: remove maskproc() method
  hpt366: cleanup maskproc() method
  ide: mask interrupt in ide_config_drive_speed()
  hpt366: fix compile warning
  ide: remove unused macros from <asm-parisc/ide.h>
  ide: remove M68K_IDE_SWAPW define from <asm-m68k/ide.h>
  ide: remove dead <asm-arm/arch-sa1100/ide.h>
  ide: fix support for IDE PCI controllers using MMIO on frv
  ide-cd: remove stale comment
  ide-cd: small drive type print fix
  ide-cd: debug log enhancements
  ide: add generic ATA/ATAPI disk driver
  ide: allow device drivers to specify per-device type /proc settings
  ...
2008-10-20 13:12:39 -07:00
Bartlomiej Zolnierkiewicz
769b49ce68 ide: re-add TRM290 fix lost during ide_build_dmatable() cleanup
commit 14c123f371 ("ide: cleanup
ide_build_dmatable()") accidentally reverted TRM290 fix introduced
by commit 22e05b4549 ("ide-dma: fix
ide_build_dmatable() for TRM290").

Reported-by: Sergei Shtylylov <sshtylyov@ru.mvista.com>
Acked-by: Sergei Shtylylov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 18:09:18 +02:00
Sergei Shtylyov
a11e2afa77 scc_pata: kill unused variables
Fix the "unused variable" warning in init_hwif_scc() caused by the commit
48c3c10726 (ide: add struct ide_host (take 3)).
Moreover, remove the write-only variable 'dma_status_port' in init_setup_scc()
about which gcc gives no warning and which has been there from the very start...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 18:09:17 +02:00
Sergei Shtylyov
107111d450 sgiioc4: kill duplicate ioremap()
By the time ide_dma_sgiioc4() gets called, sgiioc4_ide_setup_pci_device() will
have called ioremap() on the whole BAR0 region, so calling ioremap() on the DMA
registers means wasting a page. Replace this call by a mere address calculation,
based on the fact that IRQ registers (pointed to by 'hwif->io_ports.irq_addr')
are situated at offset 0 from BAR0.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: jeremy@sgi.com
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 18:09:17 +02:00
Sergei Shtylyov
8108b88232 sgiioc4: kill useless address checks
The driver performs a number of checks on the virtual/physical addresses which
would always evaluate as true (except ide_dma_sgiioc4() -- always false):

- for sgiioc4_init_hwif_ports(), its caller, sgiioc4_ide_setup_pci_device(),
  guarantees that 'ctrl_port' and 'irq_port' parameters are never 0;

- in sgiioc4_read_status(), we always read the IDE status register, so there's
  no need to check the register's address (must be a leftover from the times
  when this function implemented the INB() method);

- in ide_dma_sgiioc4(), 'dma_base' can never be 0 as IOC4_DMA_OFFSET is not 0.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: jeremy@sgi.com
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 18:09:16 +02:00
Bartlomiej Zolnierkiewicz
8c061a40c2 delkin_cb: add PM support
* Factor out chipset initialization code from delkin_cb_probe()
  to delkin_cb_init_chipset().

* Assign ->init_chipset in struct delkin_cb_port_info.

* Add delkin_cb_{suspend,resume}() (->suspend/->resume methods).

Fixes kernel bugzilla bug #11735:

http://bugzilla.kernel.org/show_bug.cgi?id=11735

Tested-by: bumble.bee@xs4all.nl
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 18:09:16 +02:00
Bartlomiej Zolnierkiewicz
41d1a3d31d ide: remove broken hpt34x driver
No big loss since HPT343/363 controllers are properly supported
by pata_hpt3x3 driver from Alan Cox.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 18:09:16 +02:00