Commit graph

1011 commits

Author SHA1 Message Date
Steven King
83ca60094e m68knommu: enable qspi support when SPI_COLDFIRE_QSPI = m
Enable Coldfire QSPI support when SPI_COLDFIRE_QSPI is built as a module.

This version of the patch combines changes to the config files and  device.c
and uses IF_ENABLED (thanks to Sam Ravnborg for the suggestion).

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-08 13:06:51 +10:00
Greg Ungerer
938ed25008 m68knommu: make sure 2nd FEC eth interface pins are enabled on 5275 ColdFire
The CONFIG_FEC2 define was removed from the kernel many versions ago.
But it is still being used to set the multi-function pins when compiling
for a ColdFire 527[45] SoC that has 2 ethernet interfaces. Remove the
last remaining uses of this define, and so fix the setting of the pins
for the 2nd ethernet interface.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-04-17 17:06:34 +10:00
Greg Ungerer
bfdd769ac5 m68knommu: fix id number for second eth device on 5275 ColdFire
The second ColdFire FEC ethernet device should have an id number of 1,
not 0. Otherwise it clashes with the first FEC ethernet device.

On booting a kernel on a 5275 based board you will get messages out of
the kernel like this:

    <4>------------[ cut here ]------------
    <4>WARNING: at fs/sysfs/dir.c:508 0x0a8b50()
    <4>sysfs: cannot create duplicate filename 'fec.0'

And likely you won't be able to completely boot up after this at all.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-04-17 16:58:35 +10:00
Greg Ungerer
89d786011f m68knommu: move and fix the 68VZ328 platform bootlogo.h
The 68EZ328/bootlogo.h is not actually used in the 68EZ328 platform code
at all. It is used by the 68VZ328 platform code though, so move it to be
with the rest of the 68VZ328 platform code.

Commit c0e0c89c08 ("fix broken boot logo
inclusion") modified the bootlogo code to not be included in asm code.
Modify 68VZ328/bootlogo.h so that the bootlogo bit map is named correctly
for direct use in the C code.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-04-16 15:11:04 +10:00
Greg Ungerer
acb0c7accd m68knommu: remove the unused bootlogo.h processing for 68EZ328 and 68VZ328
The 68EZ328 and 68VZ328 platforms currently try to process their bootlogo.h
to make it clean to include in asm files. This is no longer used, the
bootlogo.h file is now included only in C code, so remove all the processing
code in the 68EZ328 and 68VZ328 Makefiles.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-04-16 15:11:04 +10:00
Geert Uytterhoeven
450aed725c m68k/q40: Add missing platform check before registering platform devices
On multi-platform kernels, the Q40/Q60 platform devices should be
registered when running on Q40/Q60 only. Else it may crash later.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-04-01 22:57:53 +02:00
Geert Uytterhoeven
6cfeba5391 m68k/mac: Add missing platform check before registering platform devices
On multi-platform kernels, the Mac platform devices should be registered
when running on Mac only. Else it may crash later.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org
2012-04-01 22:57:51 +02:00
Greg Ungerer
7224c0d104 m68k: include asm/cmpxchg.h in our m68k atomic.h
After commit 9ffc93f203 ("Remove all

  CC      init/main.o
In file included from include/linux/mm.h:15:0,
                 from include/linux/ring_buffer.h:5,
                 from include/linux/ftrace_event.h:4,
                 from include/trace/syscall.h:6,
                 from include/linux/syscalls.h:78,
                 from init/main.c:16:
include/linux/debug_locks.h: In function ‘__debug_locks_off’:
include/linux/debug_locks.h:16:2: error: implicit declaration of function ‘xchg’

There is no indirect inclusions of the new asm/cmpxchg.h for m68k here.
Looking at most other architectures they include asm/cmpxchg.h in their
asm/atomic.h. M68k currently does not do this. Including this in atomic.h
fixes all m68k build problems.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-04-01 22:57:49 +02:00
Linus Torvalds
a591afc01d Merge branch 'x86-x32-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x32 support for x86-64 from Ingo Molnar:
 "This tree introduces the X32 binary format and execution mode for x86:
  32-bit data space binaries using 64-bit instructions and 64-bit kernel
  syscalls.

  This allows applications whose working set fits into a 32 bits address
  space to make use of 64-bit instructions while using a 32-bit address
  space with shorter pointers, more compressed data structures, etc."

Fix up trivial context conflicts in arch/x86/{Kconfig,vdso/vma.c}

* 'x86-x32-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits)
  x32: Fix alignment fail in struct compat_siginfo
  x32: Fix stupid ia32/x32 inversion in the siginfo format
  x32: Add ptrace for x32
  x32: Switch to a 64-bit clock_t
  x32: Provide separate is_ia32_task() and is_x32_task() predicates
  x86, mtrr: Use explicit sizing and padding for the 64-bit ioctls
  x86/x32: Fix the binutils auto-detect
  x32: Warn and disable rather than error if binutils too old
  x32: Only clear TIF_X32 flag once
  x32: Make sure TS_COMPAT is cleared for x32 tasks
  fs: Remove missed ->fds_bits from cessation use of fd_set structs internally
  fs: Fix close_on_exec pointer in alloc_fdtable
  x32: Drop non-__vdso weak symbols from the x32 VDSO
  x32: Fix coding style violations in the x32 VDSO code
  x32: Add x32 VDSO support
  x32: Allow x32 to be configured
  x32: If configured, add x32 system calls to system call tables
  x32: Handle process creation
  x32: Signal-related system calls
  x86: Add #ifdef CONFIG_COMPAT to <asm/sys_ia32.h>
  ...
2012-03-29 18:12:23 -07:00
David Howells
141124c020 Delete all instances of asm/system.h
Delete all instances of asm/system.h as they should be redundant by this
point.

Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-28 18:30:03 +01:00
David Howells
803f69144f Disintegrate asm/system.h for M68K
Disintegrate asm/system.h for M68K.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
cc: linux-m68k@lists.linux-m68k.org
2012-03-28 18:30:02 +01:00
David Howells
2501cf768e m68k: Fix xchg/cmpxchg to fail to link if given an inappropriate pointer
Fix the m68k versions of xchg() and cmpxchg() to fail to link if given an
inappropriately sized pointer rather than BUG()'ing at runtime.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
cc: linux-m68k@lists.linux-m68k.org
2012-03-28 18:30:02 +01:00
Linus Torvalds
7bfe0e66d5 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input subsystem updates from Dmitry Torokhov:
 "- we finally merged driver for USB version of Synaptics touchpads
    (I guess most commonly found in IBM/Lenovo keyboard/touchpad combo);

   - a bunch of new drivers for embedded platforms (Cypress
     touchscreens, DA9052 OnKey, MAX8997-haptic, Ilitek ILI210x
     touchscreens, TI touchscreen);

   - input core allows clients to specify desired clock source for
     timestamps on input events (EVIOCSCLOCKID ioctl);

   - input core allows querying state of all MT slots for given event
     code via EVIOCGMTSLOTS ioctl;

   - various driver fixes and improvements."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits)
  Input: ili210x - add support for Ilitek ILI210x based touchscreens
  Input: altera_ps2 - use of_match_ptr()
  Input: synaptics_usb - switch to module_usb_driver()
  Input: convert I2C drivers to use module_i2c_driver()
  Input: convert SPI drivers to use module_spi_driver()
  Input: omap4-keypad - move platform_data to <linux/platform_data>
  Input: kxtj9 - who_am_i check value and initial data rate fixes
  Input: add driver support for MAX8997-haptic
  Input: tegra-kbc - revise device tree support
  Input: of_keymap - add device tree bindings for simple key matrices
  Input: wacom - fix physical size calculation for 3rd-gen Bamboo
  Input: twl4030-vibra - really switch from #if to #ifdef
  Input: hp680_ts_input - ensure arguments to request_irq and free_irq are compatible
  Input: max8925_onkey - avoid accessing input device too early
  Input: max8925_onkey - allow to be used as a wakeup source
  Input: atmel-wm97xx - convert to dev_pm_ops
  Input: atmel-wm97xx - set driver owner
  Input: add cyttsp touchscreen maintainer entry
  Input: cyttsp - remove useless checks in cyttsp_probe()
  Input: usbtouchscreen - add support for Data Modul EasyTouch TP 72037
  ...
2012-03-22 20:20:18 -07:00
Linus Torvalds
b57cb7231b Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu arch updates from Greg Ungerer:
 "Includes a cleanup of the non-MMU linker script (it now almost
  exclusively uses the well defined linker script support macros and
  definitions).  Some more merging of MMU and non-MMU common files
  (specifically the arch process.c, ptrace and time.c).  And a big
  cleanup of the massively duplicated ColdFire device definition code.

  Overall we remove about 2000 lines of code, and end up with a single
  set of platform device definitions for the serial ports, ethernet
  ports and QSPI ports common in most ColdFire SoCs.

  I expect you will get a merge conflict on arch/m68k/kernel/process.c,
  in cpu_idle().  It should be relatively strait forward to fixup."

And cpu_idle() conflict resolution was indeed trivial (merging the
nommu/mmu versions of process.c trivially conflicting with the
conversion to use the schedule_preempt_disabled() helper function)

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (57 commits)
  m68knommu: factor more common ColdFire cpu reset code
  m68knommu: make 528x CPU reset register addressing consistent
  m68knommu: make 527x CPU reset register addressing consistent
  m68knommu: make 523x CPU reset register addressing consistent
  m68knommu: factor some common ColdFire cpu reset code
  m68knommu: move old ColdFire timers init from CPU init to timers code
  m68knommu: clean up init code in ColdFire 532x startup
  m68knommu: clean up init code in ColdFire 528x startup
  m68knommu: clean up init code in ColdFire 523x startup
  m68knommu: merge common ColdFire QSPI platform setup code
  m68knommu: make 532x QSPI platform addressing consistent
  m68knommu: make 528x QSPI platform addressing consistent
  m68knommu: make 527x QSPI platform addressing consistent
  m68knommu: make 5249 QSPI platform addressing consistent
  m68knommu: make 523x QSPI platform addressing consistent
  m68knommu: make 520x QSPI platform addressing consistent
  m68knommu: merge common ColdFire FEC platform setup code
  m68knommu: make 532x FEC platform addressing consistent
  m68knommu: make 528x FEC platform addressing consistent
  m68knommu: make 527x FEC platform addressing consistent
  ...
2012-03-21 18:17:51 -07:00
Linus Torvalds
3b59bf0816 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking merge from David Miller:
 "1) Move ixgbe driver over to purely page based buffering on receive.
     From Alexander Duyck.

  2) Add receive packet steering support to e1000e, from Bruce Allan.

  3) Convert TCP MD5 support over to RCU, from Eric Dumazet.

  4) Reduce cpu usage in handling out-of-order TCP packets on modern
     systems, also from Eric Dumazet.

  5) Support the IP{,V6}_UNICAST_IF socket options, making the wine
     folks happy, from Erich Hoover.

  6) Support VLAN trunking from guests in hyperv driver, from Haiyang
     Zhang.

  7) Support byte-queue-limtis in r8169, from Igor Maravic.

  8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but
     was never properly implemented, Jiri Benc fixed that.

  9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang.

  10) Support kernel side dump filtering by ctmark in netfilter
      ctnetlink, from Pablo Neira Ayuso.

  11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker.

  12) Add new peek socket options to assist with socket migration, from
      Pavel Emelyanov.

  13) Add sch_plug packet scheduler whose queue is controlled by
      userland daemons using explicit freeze and release commands.  From
      Shriram Rajagopalan.

  14) Fix FCOE checksum offload handling on transmit, from Yi Zou."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits)
  Fix pppol2tp getsockname()
  Remove printk from rds_sendmsg
  ipv6: fix incorrent ipv6 ipsec packet fragment
  cpsw: Hook up default ndo_change_mtu.
  net: qmi_wwan: fix build error due to cdc-wdm dependecy
  netdev: driver: ethernet: Add TI CPSW driver
  netdev: driver: ethernet: add cpsw address lookup engine support
  phy: add am79c874 PHY support
  mlx4_core: fix race on comm channel
  bonding: send igmp report for its master
  fs_enet: Add MPC5125 FEC support and PHY interface selection
  net: bpf_jit: fix BPF_S_LDX_B_MSH compilation
  net: update the usage of CHECKSUM_UNNECESSARY
  fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx
  net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso
  ixgbe: Fix issues with SR-IOV loopback when flow control is disabled
  net/hyperv: Fix the code handling tx busy
  ixgbe: fix namespace issues when FCoE/DCB is not enabled
  rtlwifi: Remove unused ETH_ADDR_LEN defines
  igbvf: Use ETH_ALEN
  ...

Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and
drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.
2012-03-20 21:04:47 -07:00
Linus Torvalds
843ec558f9 tty and serial merge for 3.4-rc1
Here's the big serial and tty merge for the 3.4-rc1 tree.
 
 There's loads of fixes and reworks in here from Jiri for the tty layer,
 and a number of patches from Alan to help try to wrestle the vt layer
 into a sane model.
 
 Other than that, lots of driver updates and fixes, and other minor
 stuff, all detailed in the shortlog.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iEYEABECAAYFAk9nihQACgkQMUfUDdst+ylXTQCdFuwVuZgjCts+xDVa1jX2ac84
 UogAn3Wr+P7NYFN6gvaGm52KbGbZs405
 =2b/l
 -----END PGP SIGNATURE-----

Merge tag 'tty-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull TTY/serial patches from Greg KH:
 "tty and serial merge for 3.4-rc1

  Here's the big serial and tty merge for the 3.4-rc1 tree.

  There's loads of fixes and reworks in here from Jiri for the tty
  layer, and a number of patches from Alan to help try to wrestle the vt
  layer into a sane model.

  Other than that, lots of driver updates and fixes, and other minor
  stuff, all detailed in the shortlog."

* tag 'tty-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (132 commits)
  serial: pxa: add clk_prepare/clk_unprepare calls
  TTY: Wrong unicode value copied in con_set_unimap()
  serial: PL011: clear pending interrupts
  serial: bfin-uart: Don't access tty circular buffer in TX DMA interrupt after it is reset.
  vt: NULL dereference in vt_do_kdsk_ioctl()
  tty: serial: vt8500: fix annotations for probe/remove
  serial: remove back and forth conversions in serial_out_sync
  serial: use serial_port_in/out vs serial_in/out in 8250
  serial: introduce generic port in/out helpers
  serial: reduce number of indirections in 8250 code
  serial: delete useless void casts in 8250.c
  serial: make 8250's serial_in shareable to other drivers.
  serial: delete last unused traces of pausing I/O in 8250
  pch_uart: Add module parameter descriptions
  pch_uart: Use existing default_baud in setup_console
  pch_uart: Add user_uartclk parameter
  pch_uart: Add Fish River Island II uart clock quirks
  pch_uart: Use uartclk instead of base_baud
  mpc5200b/uart: select more tolerant uart prescaler on low baudrates
  tty: moxa: fix bit test in moxa_start()
  ...
2012-03-20 11:24:39 -07:00
Dmitry Torokhov
b675b3667f Merge commit 'v3.3-rc6' into next 2012-03-09 10:55:17 -08:00
Jiri Slaby
2f16669d32 TTY: remove re-assignments to tty_driver members
All num, magic and owner are set by alloc_tty_driver. No need to
re-set them on each allocation site.

pti driver sets something different to what it passes to
alloc_tty_driver. It is not a bug, since we don't use the lines
parameter in any way. Anyway this is fixed, and now we do the right
thing.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08 11:37:58 -08:00
Greg Ungerer
ae909ea4ad m68knommu: factor more common ColdFire cpu reset code
Most of the more modern ColdFire cores use the same code to reset the CPU
(but it is different to most of the earlier cores). Currently that is
duplicated in each of the sub-arch files. Pull out this common code and
out a single copy of it with the other common reset code.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 10:42:28 +10:00
Greg Ungerer
645e5333ec m68knommu: make 528x CPU reset register addressing consistent
If we make all MCF_RCR (CPU reset register) addressing consistent across all
ColdFire CPU family members that use it then we will be able to remove the
duplicated copies of the code that use it.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 10:42:27 +10:00
Greg Ungerer
0b2a213905 m68knommu: make 527x CPU reset register addressing consistent
If we make all MCF_RCR (CPU reset register) addressing consistent across all
ColdFire CPU family members that use it then we will be able to remove the
duplicated copies of the code that use it.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 10:42:26 +10:00
Greg Ungerer
320de7d01c m68knommu: make 523x CPU reset register addressing consistent
If we make all MCF_RCR (CPU reset register) addressing consistent across all
ColdFire CPU family members that use it then we will be able to remove the
duplicated copies of the code that use it.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 10:42:25 +10:00
Greg Ungerer
d894b89bf7 m68knommu: factor some common ColdFire cpu reset code
A number of the early ColdFire cores use the same code to reset the CPU.
Currently that is duplicated in each of the sub-arch files. Pull out this
common code and use a single copy of it for all CPU types that use it.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 10:41:48 +10:00
Greg Ungerer
440f6ffc06 m68knommu: move old ColdFire timers init from CPU init to timers code
The original ColdFire timer interrupt setup is used by most of the users
of the original ColdFire timer code. But the code is currently duplicated
in each of the ColdFire CPU specific init files. Move it to the timers
code that it is really part of. It is strait forward to make it conditional
on also having the original interrupt engine that it needs.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:10 +10:00
Greg Ungerer
c05793c733 m68knommu: clean up init code in ColdFire 532x startup
We can move all the init calls in the initcall code into the more general
arch setup code (which is config_BSP() here). That makes the 532x consistent
with other ColdFire CPUs setup code. It means we can get rid of the initcall
setup here all together. Also make sure we set the arch mach_reset function
pointer to get the local arch reset code called on reset.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:10 +10:00
Greg Ungerer
9773be5f5f m68knommu: clean up init code in ColdFire 528x startup
We can move all the init calls in the initcall code into the more general
arch setup code (which is config_BSP() here). That makes the 528x consistent
with other ColdFire CPUs setup cod. It means we can get rif of the initcall
setup here all together.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:09 +10:00
Greg Ungerer
2ba168a913 m68knommu: clean up init code in ColdFire 523x startup
We can move the QSPI init call to the more general config_BSP() code on
the 523x platorm setup code. Then we can remove the initcall code all
together.

We can also remove the un-needed include of mcfuart.h while we are
cleaning up here too.

Also I noticed that we are not calling the fec_init() code here, and we
should be doing that. Put that back in too.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:09 +10:00
Greg Ungerer
fa1fc24662 m68knommu: merge common ColdFire QSPI platform setup code
The ColdFire QSPI is common to quite a few ColdFire CPUs. No need to duplicate
its platform setup code for every CPU family member that has it. Merge all the
setup code into a single shared file.

This also results in few platforms no longer needing any local platform
setup code. In those cases remove the empty devices array and initcall
code as well.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:09 +10:00
Greg Ungerer
ed8a2798f6 m68knommu: make 532x QSPI platform addressing consistent
If we make all QSPI (SPI protocol) addressing consistent across all ColdFire
family members then we will be able to remove the duplicated plaform data
and code and use a single setup for all.

So modify the ColdFire 532x QSPI addressing so that:

. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used
. move chip select definitions (CS) to appropriate header

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:09 +10:00
Greg Ungerer
3b2039b266 m68knommu: make 528x QSPI platform addressing consistent
If we make all QSPI (SPI protocol) addressing consistent across all ColdFire
family members then we will be able to remove the duplicated plaform data
and code and use a single setup for all.

So modify the ColdFire 528x QSPI addressing so that:

. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used
. move chip select definitions (CS) to appropriate header

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:09 +10:00
Greg Ungerer
6c84a60eb9 m68knommu: make 527x QSPI platform addressing consistent
If we make all QSPI (SPI protocol) addressing consistent across all ColdFire
family members then we will be able to remove the duplicated plaform data
and code and use a single setup for all.

So modify the ColdFire 527x QSPI addressing so that:

. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used
. move chip select definitions (CS) to appropriate header

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:09 +10:00
Greg Ungerer
2424f54902 m68knommu: make 5249 QSPI platform addressing consistent
If we make all QSPI (SPI protocol) addressing consistent across all ColdFire
family members then we will be able to remove the duplicated plaform data
and code and use a single setup for all.

So modify the ColdFire 5249 QSPI addressing so that:

. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used
. move chip select definitions (CS) to appropriate header

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:09 +10:00
Greg Ungerer
36d175a4b2 m68knommu: make 523x QSPI platform addressing consistent
If we make all QSPI (SPI protocol) addressing consistent across all ColdFire
family members then we will be able to remove the duplicated plaform data
and code and use a single setup for all.

So modify the ColdFire 523x QSPI addressing so that:

. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used
. move chip select definitions (CS) to appropriate header

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:09 +10:00
Greg Ungerer
a4e2e2ac08 m68knommu: make 520x QSPI platform addressing consistent
If we make all QSPI (SPI protocol) addressing consistent across all ColdFire
family members then we will be able to remove the duplicated plaform data
and code and use a single setup for all.

So modify the ColdFire 520x QSPI addressing so that:

. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used
. move chip select definitions (CS) to appropriate header

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:09 +10:00
Greg Ungerer
b7ce7f0d0e m68knommu: merge common ColdFire FEC platform setup code
The ColdFire FEC is common to quite a few ColdFire CPUs. No need to duplicate
its platform setup code for every CPU family member that has it. Merge all the
setup code into a single shared file.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:08 +10:00
Greg Ungerer
504695479e m68knommu: make 532x FEC platform addressing consistent
If we make all FEC (ethernet) addressing consistent across all ColdFire
family members then we will be able to remove the duplicated plaform data
and use a single setup for all.

So modify the ColdFire 532x FEC addressing so that:

. FECs are numbered from 0 up
. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:08 +10:00
Greg Ungerer
4f8f9fb8cb m68knommu: make 528x FEC platform addressing consistent
If we make all FEC (ethernet) addressing consistent across all ColdFire
family members then we will be able to remove the duplicated plaform data
and use a single setup for all.

So modify the ColdFire 528x FEC addressing so that:

. FECs are numbered from 0 up
. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:08 +10:00
Greg Ungerer
308bfc12dd m68knommu: make 527x FEC platform addressing consistent
If we make all FEC (ethernet) addressing consistent across all ColdFire
family members then we will be able to remove the duplicated plaform data
and use a single setup for all.

So modify the ColdFire 527x FEC addressing so that:

. FECs are numbered from 0 up
. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:08 +10:00
Greg Ungerer
9a11b493ed m68knommu: make 5272 FEC platform addressing consistent
If we make all FEC (ethernet) addressing consistent across all ColdFire
family members then we will be able to remove the duplicated plaform data
and use a single setup for all.

So modify the ColdFire 5272 FEC addressing so that:

. FECs are numbered from 0 up
. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:08 +10:00
Greg Ungerer
21634593b4 m68knommu: make 523x FEC platform addressing consistent
If we make all FEC (ethernet) addressing consistent across all ColdFire
family members then we will be able to remove the duplicated plaform data
and use a single setup for all.

So modify the ColdFire 523x FEC addressing so that:

. FECs are numbered from 0 up
. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:08 +10:00
Greg Ungerer
d4e08372e3 m68knommu: make 520x FEC platform addressing consistent
If we make all FEC (ethernet) addressing consistent across all ColdFire
family members then we will be able to remove the duplicated plaform data
and use a single setup for all.

So modify the ColdFire 520x FEC addressing so that:

. FECs are numbered from 0 up
. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:08 +10:00
Greg Ungerer
55148f6f88 m68knommu: merge common ColdFire UART IRQ setup
Some ColdFire CPU UART hardware modules can configure the IRQ they use.
Currently the same setup code is duplicated in the init code for each of
these ColdFire CPUs. Merge all this code to a single instance.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:08 +10:00
Greg Ungerer
0d2fe94647 m68knommu: merge common ColdFire UART platform setup code
The ColdFire UART is common to all ColdFire CPU's. No need to duplicate
its platform setup code for every CPU family member. Merge all the setup
code into a single shared file.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:08 +10:00
Greg Ungerer
b9a0c3f88e m68knommu: simplify the 54xx UART setup code
Simplify the UART setup code so that it no longer loops for each UART
present. Just make it do all the work it needs in a single function.
This will make the code easier to share when we move to a single set
of platform data for ColdFire UARTs.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:07 +10:00
Greg Ungerer
b77fb7faa9 m68knommu: simplify the 5407 UART setup code
Simplify the UART setup code so that it no longer loops for each UART
present. Just make it do all the work it needs in a single function.
This will make the code easier to share when we move to a single set
of platform data for ColdFire UARTs.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:07 +10:00
Greg Ungerer
a75bc61952 m68knommu: simplify the 532x UART setup code
Simplify the UART setup code so that it no longer loops for each UART
present. Just make it do all the work it needs in a single function.
This will make the code easier to share when we move to a single set
of platform data for ColdFire UARTs.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:07 +10:00
Greg Ungerer
7bdebba492 m68knommu: simplify the 5307 UART setup code
Simplify the UART setup code so that it no longer loops for each UART
present. Just make it do all the work it needs in a single function.
This will make the code easier to share when we move to a single set
of platform data for ColdFire UARTs.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:07 +10:00
Greg Ungerer
cae82a836d m68knommu: simplify the 528x UART setup code
Simplify the UART setup code so that it no longer loops for each UART
present. Just make it do all the work it needs in a single function.
This will make the code easier to share when we move to a single set
of platform data for ColdFire UARTs.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:07 +10:00
Greg Ungerer
1eb1391638 m68knommu: simplify the 527x UART setup code
Simplify the UART setup code so that it no longer loops for each UART
present. Just make it do all the work it needs in a single function.
This will make the code easier to share when we move to a single set
of platform data for ColdFire UARTs.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:07 +10:00
Greg Ungerer
6b656e8a74 m68knommu: simplify the 5272 UART setup code
Simplify the UART setup code so that it no longer loops for each UART
present. Just make it do all the work it needs in a single function.
This will make the code easier to share when we move to a single set
of platform data for ColdFire UARTs.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:07 +10:00