Commit graph

2429 commits

Author SHA1 Message Date
Domen Puncer
2e1ee1f766 [POWERPC] mpc52xx suspend to deep-sleep
Implement deep-sleep on MPC52xx.
SDRAM is put into self-refresh with help of SRAM code
(alternatives would be code in FLASH, I-cache).
Interrupt code must also not be in SDRAM, so put it
in I-cache.
MPC52xx core is static, so contents will remain intact even
with clocks turned off.

Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 20:31:15 +10:00
Domen Puncer
3a5cc44268 [POWERPC] Set efika's device_type to "soc"
Device type should be "soc" (as in lite5200.dts), compatible is
already set to "mpc5200".

Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 20:31:15 +10:00
Domen Puncer
5cae84c971 [POWERPC] lite5200(b) support for i2c
Add fsl-i2c to mpc5200 i2c node in device tree, and enable FSL_SOC.

Tested to work with built-in eeprom on lite5200b.

Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 20:31:15 +10:00
Domen Puncer
0d0f4bc70e [POWERPC] lite5200(b) DTS fixes
Three trivial DTS fixes:
 -Mark Lite5200(b) boards as "mpc5200" compatible. On efika the
  firmware already does that.
 -Fix mscan interrupt.
 -Fix wakeup GPIO address.

Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 20:31:15 +10:00
Sylvain Munaut
de41189bf6 [POWERPC] Export of_device_get_modalias
Apparently other parts of the kernel need to know the
modalias internally (like the sysfs code in macintosh driver).

To avoid consistency issues, we export this code and use it
everywhere it's needed rather than repeat it ...

Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 20:31:15 +10:00
David Gibson
d25a9d66e0 [POWERPC] Fix some missing build dependencies in arch/powerpc/boot
This patch fixes a couple of missing dependencies in
arch/powerpc/boot/Makefile.  First, it ensures that the zlib.h header
is linked in before attempting to build gunzip_util.o, as it is,
building gunzip_util.o usually works, but not always depending on make
order.

Second, it makes the final images which are built using a dts
dependent on that dts, so the image will be correctly rebuilt if the
dts changes.  This in turn requires fixing the definition of the dts
variable.  CONFIG_DEVICE_TREE from Kconfig will have quotes around it,
which don't matter when passing the variable to a shell, but which
need to be removed when incorporating it into a filename for make's
use.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 20:31:15 +10:00
Olof Johansson
2abb7019e2 [POWERPC] pasemi: Update ppc_proc_freq from cpufreq driver
Update the global cpu speed variable according to current cpufreq speed,
/proc/cpuinfo reports the actual speed.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 20:31:14 +10:00
Johannes Berg
543b9fd352 [POWERPC] powermac: Suspend to disk on G5
Powermac G5 suspend to disk implementation.  The code is platform
agnostic but only tested on powermac, no other 64-bit powerpc
machines.

Because nvidiafb still breaks suspend I have marked it EXPERIMENTAL on
powermac and because I can't test it and some lowlevel code will need
changes it is BROKEN on all other 64-bit platforms.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 20:31:14 +10:00
Johannes Berg
7e11580b36 [POWERPC] DART iommu suspend
This implements save and restore hooks for IOMMUs and implements
it the DART iommu.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 20:31:14 +10:00
Stephen Rothwell
55b61fec22 [POWERPC] Rename device_is_compatible to of_device_is_compatible
for consistency with other Open Firmware interfaces (and Sparc).

This is just a straight replacement.

This leaves the compatibility define in place.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 20:31:14 +10:00
Johannes Berg
d9333afd6a [POWERPC] powermac: Support G5 CPU hotplug
This allows "hotplugging" of CPUs on G5 machines.  CPUs that are
disabled are put into an idle loop with the decrementer frequency set
to minimum.  To wake them up again we kick them just like when bringing
them up.  To stop those CPUs from messing with any global state we stop
them from entering the timer interrupt.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 20:31:13 +10:00
Scott Wood
ac18c673e7 [POWERPC] bootwrapper: Only build cuImage if CONFIG_DEVICE_TREE is non-empty
This allows the zImage target to once again be used to build
all supported image types, rather than requiring an explicit
"make uImage" to avoid failing to create an unneeded cuImage.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 20:31:13 +10:00
will schmidt
44755d11a3 [POWERPC] Add smp_call_function_map and smp_call_function_single
Add a new function named smp_call_function_single().  This matches a generic
prototype from include/linux/smp.h.

Add a function smp_call_function_map().  This is, for the most part, a rename
of smp_call_function, with some added cpumask support.  smp_call_function and
smp_call_function_single call into smp_call_function_map.

Lightly tested on 970mp (blade), power4 and power5.

Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com>
cc: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 20:31:13 +10:00
Kevin Corry
e9e77ce871 [POWERPC] Change topology_init() to a subsys_initcall
Change the powerpc version of topology_init() from an __initcall to
a subsys_initcall to match all other architectures.

Signed-off-by: Kevin Corry <kevcorry@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 20:31:13 +10:00
Johannes Berg
3669e93048 [POWERPC] MPIC sys_device & suspend/resume
This adds mpic to the system devices and implements suspend
and resume for them.  This is necessary to get interrupts for
modules back to where they were before a suspend to disk.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 20:31:13 +10:00
Luke Browning
71bf08b6c0 [POWERPC] 64K page support for kexec
This fixes a couple of kexec problems related to 64K page
support in the kernel.  kexec issues a tlbie for each pte.  The
parameters for the tlbie are the page size and the virtual address.
Support was missing for the computation of these two parameters
for 64K pages.  This adds that support.

Signed-off-by: Luke Browning <lukebrowning@us.ibm.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 20:31:12 +10:00
Linus Torvalds
ea62ccd00f Merge branch 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: (231 commits)
  [PATCH] i386: Don't delete cpu_devs data to identify different x86 types in late_initcall
  [PATCH] i386: type may be unused
  [PATCH] i386: Some additional chipset register values validation.
  [PATCH] i386: Add missing !X86_PAE dependincy to the 2G/2G split.
  [PATCH] x86-64: Don't exclude asm-offsets.c in Documentation/dontdiff
  [PATCH] i386: avoid redundant preempt_disable in __unlazy_fpu
  [PATCH] i386: white space fixes in i387.h
  [PATCH] i386: Drop noisy e820 debugging printks
  [PATCH] x86-64: Fix allnoconfig error in genapic_flat.c
  [PATCH] x86-64: Shut up warnings for vfat compat ioctls on other file systems
  [PATCH] x86-64: Share identical video.S between i386 and x86-64
  [PATCH] x86-64: Remove CONFIG_REORDER
  [PATCH] x86-64: Print type and size correctly for unknown compat ioctls
  [PATCH] i386: Remove copy_*_user BUG_ONs for (size < 0)
  [PATCH] i386: Little cleanups in smpboot.c
  [PATCH] x86-64: Don't enable NUMA for a single node in K8 NUMA scanning
  [PATCH] x86: Use RDTSCP for synchronous get_cycles if possible
  [PATCH] i386: Add X86_FEATURE_RDTSCP
  [PATCH] i386: Implement X86_FEATURE_SYNC_RDTSC on i386
  [PATCH] i386: Implement alternative_io for i386
  ...

Fix up trivial conflict in include/linux/highmem.h manually.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-05 14:55:20 -07:00
Linus Torvalds
5b33991576 Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  remove "struct subsystem" as it is no longer needed
  sysfs: printk format warning
  DOC: Fix wrong identifier name in Documentation/driver-model/devres.txt
  platform: reorder platform_device_del
  Driver core: fix show_uevent from taking up way too much stack
2007-05-04 18:04:48 -07:00
Linus Torvalds
89661adaae Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (59 commits)
  PCI: Free resource files in error path of pci_create_sysfs_dev_files()
  pci-quirks: disable MSI on RS400-200 and RS480
  PCI hotplug: Use menuconfig objects
  PCI: ZT5550 CPCI Hotplug driver fix
  PCI: rpaphp: Remove semaphores
  PCI: rpaphp: Ensure more pcibios_add/pcibios_remove symmetry
  PCI: rpaphp: Use pcibios_remove_pci_devices() symmetrically
  PCI: rpaphp: Document is_php_dn()
  PCI: rpaphp: Document find_php_slot()
  PCI: rpaphp: Rename rpaphp_register_pci_slot() to rpaphp_enable_slot()
  PCI: rpaphp: refactor tail call to rpaphp_register_slot()
  PCI: rpaphp: remove rpaphp_set_attention_status()
  PCI: rpaphp: remove print_slot_pci_funcs()
  PCI: rpaphp: Remove setup_pci_slot()
  PCI: rpaphp: remove a call that does nothing but a pointer lookup
  PCI: rpaphp: Remove another wrappered function
  PCI: rpaphp: Remve another call that is a wrapper
  PCI: rpaphp: remove a function that does nothing but wrap debug printks
  PCI: rpaphp: Remove un-needed goto
  PCI: rpaphp: Fix a memleak; slot->location string was never freed
  ...
2007-05-04 18:04:29 -07:00
Michael Ellerman
bab41e9be7 PCI: Convert to alloc_pci_dev()
Convert code that allocs a struct pci_dev to use alloc_pci_dev().

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:37 -07:00
Jean Delvare
6473d160b4 PCI: Cleanup the includes of <linux/pci.h>
I noticed that many source files include <linux/pci.h> while they do
not appear to need it. Here is an attempt to clean it all up.

In order to find all possibly affected files, I searched for all
files including <linux/pci.h> but without any other occurence of "pci"
or "PCI". I removed the include statement from all of these, then I
compiled an allmodconfig kernel on both i386 and x86_64 and fixed the
false positives manually.

My tests covered 66% of the affected files, so there could be false
positives remaining. Untested files are:

arch/alpha/kernel/err_common.c
arch/alpha/kernel/err_ev6.c
arch/alpha/kernel/err_ev7.c
arch/ia64/sn/kernel/huberror.c
arch/ia64/sn/kernel/xpnet.c
arch/m68knommu/kernel/dma.c
arch/mips/lib/iomap.c
arch/powerpc/platforms/pseries/ras.c
arch/ppc/8260_io/enet.c
arch/ppc/8260_io/fcc_enet.c
arch/ppc/8xx_io/enet.c
arch/ppc/syslib/ppc4xx_sgdma.c
arch/sh64/mach-cayman/iomap.c
arch/xtensa/kernel/xtensa_ksyms.c
arch/xtensa/platform-iss/setup.c
drivers/i2c/busses/i2c-at91.c
drivers/i2c/busses/i2c-mpc.c
drivers/media/video/saa711x.c
drivers/misc/hdpuftrs/hdpu_cpustate.c
drivers/misc/hdpuftrs/hdpu_nexus.c
drivers/net/au1000_eth.c
drivers/net/fec_8xx/fec_main.c
drivers/net/fec_8xx/fec_mii.c
drivers/net/fs_enet/fs_enet-main.c
drivers/net/fs_enet/mac-fcc.c
drivers/net/fs_enet/mac-fec.c
drivers/net/fs_enet/mac-scc.c
drivers/net/fs_enet/mii-bitbang.c
drivers/net/fs_enet/mii-fec.c
drivers/net/ibm_emac/ibm_emac_core.c
drivers/net/lasi_82596.c
drivers/parisc/hppb.c
drivers/sbus/sbus.c
drivers/video/g364fb.c
drivers/video/platinumfb.c
drivers/video/stifb.c
drivers/video/valkyriefb.c
include/asm-arm/arch-ixp4xx/dma.h
sound/oss/au1550_ac97.c

I would welcome test reports for these files. I am fine with removing
the untested files from the patch if the general opinion is that these
changes aren't safe. The tested part would still be nice to have.

Note that this patch depends on another header fixup patch I submitted
to LKML yesterday:
  [PATCH] scatterlist.h needs types.h
  http://lkml.org/lkml/2007/3/01/141

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:35 -07:00
Greg Kroah-Hartman
823bccfc40 remove "struct subsystem" as it is no longer needed
We need to work on cleaning up the relationship between kobjects, ksets and
ktypes.  The removal of 'struct subsystem' is the first step of this,
especially as it is not really needed at all.

Thanks to Kay for fixing the bugs in this patch.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 18:57:59 -07:00
Jeremy Fitzhardinge
b6e3590f81 [PATCH] x86: Allow percpu variables to be page-aligned
Let's allow page-alignment in general for per-cpu data (wanted by Xen, and
Ingo suggested KVM as well).

Because larger alignments can use more room, we increase the max per-cpu
memory to 64k rather than 32k: it's getting a little tight.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-05-02 19:27:12 +02:00
Vivek Goyal
49c3df6aaa [PATCH] x86: Move swsusp __pa() dependent code to arch portion
o __pa() should be used only on kernel linearly mapped virtual addresses
  and not on kernel text and data addresses.

o Hibernation code needs to determine the physical address associated
  with kernel symbol to mark a section boundary which contains pages which
  don't have to be saved and restored during hibernate/resume operation.

o Move this piece of code in arch dependent section. So that architectures
  which don't have kernel text/data mapped into kernel linearly mapped
  region can come up with their own ways of determining physical addresses
  associated with a kernel text.

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:07 +02:00
Christoph Hellwig
9f90b997de [POWERPC] Minor fault path optimization
Call the kprobes pagefault handler directly instead of going through
the complex notifier chain.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02 20:57:39 +10:00
Scott Wood
14d1d2f25b [POWERPC] Remove duplicate export of __div64_32.
Change 3927f2e8f9 moved lib/lib64.c from
lib-y to obj-y, preventing the export in ppc_ksyms.c from overriding
the one in lib, and thus causing a duplicate-export warning.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02 20:04:32 +10:00
Olof Johansson
90f7afefae [POWERPC] pasemi: Only call of_platform_bus_probe() on relevant platforms
Only publish of_platform devices if running on a machine that has them.

Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02 20:04:32 +10:00
David Gibson
a6afacb6b8 [POWERPC] Small cleanups to the cuboot bootwrapper code
This patch makes a few small cleanups to the cuboot code.
	- It removes the double layered selection of images, via
cuboot-plat-y, instead having the cuboot platforms directly select a
suitable image-y (this changes the name of the final cuboot image from
plain cuImage to cuImage.<platform>).
	- Factors out some code in the wrapper that's potentially
useful to platforms other than uboot.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02 20:04:31 +10:00
Geoff Levand
0cd74f398a [POWERPC] PS3: Defconfig updates
Updates to ps3_defconfig for linux-2.6.21.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02 20:04:31 +10:00
Takao Shinohara
0874dd40bf [POWERPC] PS3: Fix system slowdown
The PS3 HV will deliver soft-disabled interrupts at the next HV call or
interrupt.  Add an HV call to local_irq_restore() to force the timely
delivery of any pending interrupts.

This fixes the system slowdown bug reported here
http://bugzilla.kernel.org/show_bug.cgi?id=8260

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02 20:04:31 +10:00
Geoff Levand
dc4f60c25a [POWERPC] PS3: Interrupt routine fixups.
Fixups for the ps3 interrupt routines to support all HV device
in a generic way.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02 20:04:31 +10:00
Geoff Levand
1282885663 [POWERPC] PS3: Remove duplicate variable assignement
A minor change to remove a duplicate variable assignement in ps3_mm_shutdown();

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02 20:04:31 +10:00
Geoff Levand
f0a1d024cc [POWERPC] PS3: Add DABR support
Add PS3 support for the PowerPC processor's Data Address Breakpoint Register
(DABR).

Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02 20:04:30 +10:00
Josh Boyer
5cddd2e355 [POWERPC] Fix spurious vectors on weird MPIC
The weird TSI 10x MPIC needs an EOI after getting a spurious vector.  This
patch uses the existing MPIC_SPV_EOI flag to fix this issue.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02 20:04:30 +10:00
Johannes Berg
be9c94dd77 [POWERPC] Fix suspend states again
In commit 0fba3a1f39 (a very long time ago,
May 2006), I fixed a bug that caused powermacs to crash when you tried
entering standby/mem suspend states.

As I'm now getting more familiar with the suspend code I notice a few
more things:
 1. we previously misunderstood what pm_ops is for, it isn't supposed to be
    for doing platform dependent suspend/resume stuff that needs to be done
    for suspend to disk (as we currently try to use it!), it is instead for
    entering platform dependent suspend states ("standby", "mem").
 2. due to the first point, we never properly save FPU and altivec states
    when suspending to disk. It probably hasn't hurt yet because the process
    that writes the "disk" to /sys/power/state uses neither and its context
    is used.

This patch addresses these points as follows:
 1. remove all pm_ops from powermac, powermac suspend to ram isn't currently
    usable via /sys/power/state but is done via the PMU instead.
 2. move the code responsible for storing FPU/altivec state into
    save_processor_state and the set_context() call to restore_processor_state.
 3. add a call to kernel_enable_spe()

It may look like there is some code removal missing but that is
actually because the new suspend.h file overrides the ppc/suspend.h
one which was previously used.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02 20:04:30 +10:00
David Gibson
69d48b409c [POWERPC] Fix STRICT_MM_TYPECHECKS
Since we don't have it active by default, the STRICT_MM_TYPECHECKS
option has bitrotted again.  This patch fixes a couple of simple build
fixes if the option is selected.  First, pud_t mustn't be defined in
page.h on 32-bit systems, because it conflicts with the version in the
generic pud-folding code.  Second, pci_32.c is missing a __pgprot()
wrapper call.  Third, a couple of PS3 files use constants of type
pgprot_t when they need the raw values, we add pgprot_val() calls to
fix this.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02 20:04:30 +10:00
David Gibson
57d7909e0d [POWERPC] Revise PPC44x MMU code for arch/powerpc
This patch takes the definitions for the PPC44x MMU (a software loaded
TLB) from asm-ppc/mmu.h, cleans them up of things no longer necessary
in arch/powerpc and puts them in a new asm-powerpc/mmu_44x.h file.  It
also substantially simplifies arch/powerpc/mm/44x_mmu.c and makes a
couple of small fixes necessary for the 44x MMU code to build and work
properly in arch/powerpc.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02 20:04:29 +10:00
Christian Krafft
c3e8011ad1 [POWERPC] Uninline of_iomap function
There is no big reason to have that function inlined.

Signed-off-by: Christian Krafft <krafft@de.ibm.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02 20:04:29 +10:00
Michael Ellerman
ed16669298 [POWERPC] Initialise spinlock in the DEBUG_PAGEALLOC code
Fixes:

BUG: spinlock bad magic on CPU#0, swapper/0
 lock: c00000000064ec30, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
Call Trace:
[c00000000062b980] [c00000000000f920] .show_stack+0x6c/0x1a0 (unreliable)
[c00000000062ba20] [c0000000001c2b40] .spin_bug+0xb0/0xd4
[c00000000062bab0] [c0000000001c2ed0] ._raw_spin_lock+0x44/0x184
[c00000000062bb50] [c0000000003a42b4] ._spin_lock+0x10/0x24
[c00000000062bbd0] [c00000000002b4dc] .kernel_map_pages+0x198/0x278
[c00000000062bc90] [c000000000079720] .free_hot_cold_page+0x124/0x418
[c00000000062bd70] [c000000000530278] .free_all_bootmem_core+0x14c/0x224
[c00000000062be50] [c00000000052a178] .mem_init+0x68/0x170
[c00000000062bee0] [c00000000051d874] .start_kernel+0x2a0/0x37c
[c00000000062bf90] [c0000000000084c8] .start_here_common+0x54/0x8c

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02 20:04:29 +10:00
Kim Phillips
543e51c0e1 [POWERPC] Turn on corresponding PHY drivers in QE UEC platforms defconfigs
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02 20:04:29 +10:00
Kim Phillips
3baee95595 [POWERPC] Add 'mdio' to bus scan id list for platforms with QE UEC
Add 'mdio' to bus scan id list for platforms with QE UEC
as a consequence of converting UEC mdio driver to an
of_platform driver in the ucc_geth phylib conversion patch.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02 20:04:29 +10:00
Kim Phillips
0fd8c47ccc [POWERPC] Replace undocumented interface properties in dts files
phy-connection-type now supersedes the interface property.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02 20:04:29 +10:00
Linas Vepstas
650f7b3b2f [POWERPC] pseries: Handle null iommu dma-window property correctly
Some versions of pSeries firmware fail to set up a
dma-window property for PCI slots that are unoccupied.
As a result, the loop searching for this propery, in
pci_dma_dev_setup_pSeriesLP(), can run to the end, resulting
in a NULL pointer dereference later in the routine. This
patch prevents the crash, and prints a warning message.

This is theoretically a rare error, as it occurs on what
is hopefully just beta levels of firmware. But just in case
this firmware escapes into the wild, this patch will avoid
the crash.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
2007-05-02 20:04:29 +10:00
Johannes Berg
8fce6dd29f [POWERPC] powermac: Fix G5-cpufreq for cpu on/offline
The original code here is wrong, it applies "previous" knowledge.
The way the cpufreq core is designed is that the policy for the
secondary CPU that comes online says that it must in fact not
use this policy but use the same as the other CPUs that are
listed, which in fact is CPU#0.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02 20:04:28 +10:00
Johannes Berg
b302887854 [POWERPC] apm_emu: Use generic apm-emulation
This patch removes a huge amount of code that is now in common code
in drivers/char/apm-emulation.c

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02 16:42:19 +10:00
Zang Roy-r61911
6bfeccdc11 [POWERPC] kernel: Remove loops_per_jiffy code for 7448HPC2 platforms
Remove loops_per_jiffy early initialization code for 7448HPC2 platforms.
Since udelay no longer uses loops_per_jiffy it is not necessary to
initialize it early.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02 16:42:16 +10:00
Johannes Berg
a3cf4bdef0 [POWERPC] Remove unneeded page_is_ram export
arch/powerpc/mm/mem.c exports page_is_ram, which is not used anywhere
that could be modular.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02 16:40:57 +10:00
Mathieu Desnoyers
c0b3ae14f1 [POWERPC] Move of_irq_to_resource from prom.h to prom_parse.c
In the powerpc architecture, of_irq_to_resource, currently sitting in
prom.h, needs irq_of_parse_and_map and NO_IRQ from asm-powerpc/irq.h.
The solution suggested by Benjamin Herrenschmidt is to move it to
arch/powerpc/kernel/prom_parse.c.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02 16:40:55 +10:00
Jean Delvare
7c59b6615f i2c: Cleanup the includes of <linux/i2c.h>
Clean up the includes of <linux/i2c.h>. Only include this header file
when we actually need it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:29 +02:00
Linus Torvalds
24a77daf3d Merge branch 'for-2.6.22' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'for-2.6.22' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (255 commits)
  [POWERPC] Remove dev_dbg redefinition in drivers/ps3/vuart.c
  [POWERPC] remove kernel module option for booke wdt
  [POWERPC] Avoid putting cpu node twice
  [POWERPC] Spinlock initializer cleanup
  [POWERPC] ppc4xx_sgdma needs dma-mapping.h
  [POWERPC] arch/powerpc/sysdev/timer.c build fix
  [POWERPC] get_property cleanups
  [POWERPC] Remove the unused HTDMSOUND driver
  [POWERPC] cell: cbe_cpufreq cleanup and crash fix
  [POWERPC] Declare enable_kernel_spe in a header
  [POWERPC] Add dt_xlate_addr() to bootwrapper
  [POWERPC] bootwrapper: CONFIG_ -> CONFIG_DEVICE_TREE
  [POWERPC] Don't define a custom bd_t for Xilixn Virtex based boards.
  [POWERPC] Add sane defaults for Xilinx EDK generated xparameters files
  [POWERPC] Add uartlite boot console driver for the zImage wrapper
  [POWERPC] Stop using ppc_sys for Xilinx Virtex boards
  [POWERPC] New registration for common Xilinx Virtex ppc405 platform devices
  [POWERPC] Merge common virtex header files
  [POWERPC] Rework Kconfig dependancies for Xilinx Virtex ppc405 platform
  [POWERPC] Clean up cpufreq Kconfig dependencies
  ...
2007-04-30 08:10:12 -07:00
Paul Mackerras
49e1900d4c Merge branch 'linux-2.6' into for-2.6.22 2007-04-30 12:38:01 +10:00
John Rigby
6ec367091a [POWERPC] Avoid putting cpu node twice
Call of_find_node_by_type with NULL instead of np
so the cpu node does not get put twice.
This was causing kref_put warnings.

Signed-off-by: John Rigby <jrigby@freescale.com>
Acked-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-30 11:05:48 +10:00
Thomas Gleixner
057b184a00 [POWERPC] Spinlock initializer cleanup
Use DEFINE_SPINLOCK instead of initializing spinlocks to
SPIN_LOCK_UNLOCKED, since DEFINE_SPINLOCK is better for lockdep.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-30 11:02:06 +10:00
Srinivasa Ds
738925b685 [POWERPC] arch/powerpc/sysdev/timer.c build fix
arch/powerpc/sysdev/timer.c:51: error: variable `timer_sysclass' has
initializer but incomplete type
arch/powerpc/sysdev/timer.c:52: error: unknown field `resume' specified in initializer
<etc>

Signed-off-by: Srinivasa Ds <srinivasa@in.ibm.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-30 11:02:05 +10:00
Stephen Rothwell
12d371a69e [POWERPC] get_property cleanups
Just another pass through arch/powerpc for old usages.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-30 11:02:05 +10:00
Olof Johansson
4bd4aa1967 [POWERPC] cell: cbe_cpufreq cleanup and crash fix
cbe_cpufreq cleanups:

* comment format
* whitespace
* don't init on non-cell platforms

Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Christian Krafft <krafft@de.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-30 11:02:05 +10:00
Mark A. Greer
8895ea483e [POWERPC] Add dt_xlate_addr() to bootwrapper
dt_xlate_reg() looks up the 'reg' property in the specified node
to get the address and size to translate.  Add dt_xlate_addr()
which is passed in the address and size to translate.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-30 11:02:05 +10:00
Scott Wood
d818d7ec8b [POWERPC] bootwrapper: CONFIG_ -> CONFIG_DEVICE_TREE
A usage of CONFIG_DEVICE_TREE got accidentally truncated; this
fix allows out-of-tree dts files to work.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-30 11:02:04 +10:00
Olof Johansson
c146c958dc [POWERPC] Clean up cpufreq Kconfig dependencies
Shuffle Kconfig order, making the platform drivers menu depend on the global
option instead of each driver being dependent on it.

Also fix dependency of PPC_PMAC on the G5 one.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-30 11:02:03 +10:00
Paul Mackerras
e089ad46db Revert "[POWERPC] Autodetect serial console on efika"
This reverts commit 9414715a7b,
at Olaf Hering's request:

> Paul, please discard this patch. The optional graphics card may have
> also device_type 'serial' if it is in VGA mode.
> I will send an updated patch later.
2007-04-30 10:24:24 +10:00
Michael Reiss
d5b9049df2 ucc_geth: Implement Transmit on Demand support
Transmit on Demand: Fix spelling in config option, and make it actually enable TOD.

Signed-off-by: Michael Reiss <michael.f.reiss@freescale.com>
Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 11:01:04 -04:00
Andrew Morton
eed40d3ad2 powerpc: make it compile for multithread change
arch/powerpc/kernel/of_platform.c:479: error: unknown field `multithread_probe' specified in initializer

Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 10:57:28 -07:00
Olaf Hering
8d8a0241eb [POWERPC] Generic check_legacy_ioport
check_legacy_ioport makes only sense on PREP, CHRP and pSeries.
They may have an isa node with PS/2, parport, floppy and serial ports.

Remove the check_legacy_ioport call from ppc_md, it's not needed
anymore.  Hardware capabilities come from the device-tree.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27 21:14:30 +10:00
Scott Wood
173ba87b95 [POWERPC] bootwrapper: cuboot-83xx: Exclude upper 1MB from heap.
The uppermost part of memory is where u-boot puts the stack, so don't
include that in the heap.  It's not currently causing problems, as the
current code allocates from the bottom of the heap, but this will keep
things from potentially breaking if a future implementation were to
allocate from the top.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27 21:14:21 +10:00
Scott Wood
4536b93746 [POWERPC] bootwrapper: cuImage for 85xx
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27 21:14:15 +10:00
Scott Wood
e4bb688d9f [POWERPC] bootwrapper: Fix array handling in dt_xlate_reg().
This fixes a few bugs in how dt_xlate_reg() handles address arrays:

1. copy_val() was copying into the wrong end of the array, resulting
in random stack garbage at the other end.
2. dt_xlate_reg() was getting the result from the wrong end of the array.
3. add_reg() and sub_reg() were treating the arrays as
little-endian rather than big-endian.
4. add_reg() only returned an error on a carry out of the entire
array, rather than out of the naddr portion.
5. The requested reg resource was checked to see if it exceeded
the size of the reg property, but not to see if it exceeded the
size of the buffer.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27 21:13:56 +10:00
Milton Miller
3c5f616254 [POWERPC] boot: More verbose gunzip error message
Change the error message in gunzip_exactly to be more verbose.

Besides the identifier being unrelated to the current function name,
the user had no indication if the corruption was near the beginning
or the end.

Signed-off-by: Milton Miller <miltonm@bga.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27 21:13:49 +10:00
Akinobu Mita
928370c676 [POWERPC] Enable make install
make help on powerpc says make install is available.
But it failed due to no rule to make install.

This patch enables make install to work.

Signed-off-by: Akinobu Mita <mita@fixstars.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27 21:13:43 +10:00
Benjamin Herrenschmidt
57647a4dad [POWERPC] Always use -mno-string
The string load/store instructions are unimplemented on some processors
and slow (microcoded) on some others.  It's simplest to just not use
them at all.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27 21:13:35 +10:00
Anton Blanchard
f13659e0b3 [POWERPC] Fix WARN_ON when entering xmon
Whenever we enter xmon we get a WARN_ON out of the rtas code since it
thinks interrupts are still on:

Unable to handle kernel paging request for data at address 0x00000000
Faulting instruction address: 0xd000000000080008
cpu 0x3: Vector: 300 (Data Access) at [c0000000075dba00]
    pc: d000000000080008: .doit+0x8/0x40 [oopser]
    lr: c000000000077704: .sys_init_module+0x1664/0x1824
    sp: c0000000075dbc80
   msr: 9000000000009032
   dar: 0
 dsisr: 42000000
  current = 0xc000000003fa64b0
  paca    = 0xc000000000694280
    pid   = 2260, comm = insmod

------------[ cut here ]------------
Badness at arch/powerpc/kernel/entry_64.S:651
Call Trace:
[C0000000075DAE70] [C00000000000EB64] .show_stack+0x68/0x1b0 (unreliable)
[C0000000075DAF10] [C000000000216254] .report_bug+0x94/0xe8
[C0000000075DAFA0] [C00000000047B140] __kprobes_text_start+0x178/0x584
[C0000000075DB040] [C0000000000044F4] program_check_common+0xf4/0x100

Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27 21:13:28 +10:00
Will Schmidt
e7273d2a08 [POWERPC] Replace if-then-else with a switch statement
Convert a compound if-else blob to a switch statement.
This better fits the kernel coding style.

Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27 21:13:21 +10:00
Olof Johansson
2e0c3370b3 [POWERPC] pasemi: Cpufreq driver
Cpufreq driver for PA Semi PWRficient processors.

Signed-off-by: Egor Martovetsky <egor@pasemi.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27 15:51:57 +10:00
Olof Johansson
116ab40df8 [POWERPC] pasemi: Kconfig for gpio_mdio
arch/powerpc/platforms/pasemi/gpio_mdio.c really depends on CONFIG_PHYLIB.
Add a config option for it, allow for it to be disabled if needed and fix
the dependency.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27 15:51:56 +10:00
Olof Johansson
952418cd38 [POWERPC] pasemi: Remove build warning
arch/powerpc/platforms/pasemi/setup.c: In function 'pasemi_publish_devices':
arch/powerpc/platforms/pasemi/setup.c:220: warning: implicit declaration of function 'of_platform_bus_probe'

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27 15:51:56 +10:00
Paul Mackerras
0999ed7f57 Revert "[POWERPC] DMA 4GB boundary protection"
This reverts commit 618d3adc35, because
it is superseded by 569975591c.
2007-04-26 19:48:15 +10:00
David S. Miller
ded220bd8f [STRING]: Move strcasecmp/strncasecmp to lib/string.c
We have several platforms using local copies of identical
code.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 01:54:39 -07:00
Alan Cox
ab4627683a [POWERPC] pci_32.c: Switch to ref counting PCI API
pci_find_slot isn't hot-plug safe.  Move this code to the pci hotplug
safe equivalent and hold a refcount properly while doing
make_one_node_map.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 22:12:20 +10:00
David Gibson
37f01d64d8 [POWERPC] Abolish PHYS_FMT macro from arch/powerpc
32-bit powerpc systems define a macro, PHYS_FMT, giving a printf
format string fragment for displaying physical addresses, since most
32-bit powerpc platforms use 32-bit physical addresses but a few use
64-bit physical addresses.

This macro is used in exactly one place, a rare error message, where
we can solve the problem more simply by just unconditionally casting
the address up to 64-bit quantity before formatting it.

This patch does so, meaning that as we bring MMU definitions from
asm-ppc over to asm-powerpc, cleaning them up in the process, we don't
need to implement this ugly macro (which additionally has a very bad
name for something global).

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 22:11:16 +10:00
Stephen Rothwell
30686ba6d5 [POWERPC] Remove old interface find_devices
Replace uses with of_find_node_by_name and for_each_node_by_name.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 22:09:02 +10:00
Stephen Rothwell
1658ab6678 [POWERPC] Remove old interface find_type_devices
Replaced by of_find_node_by_type.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 22:09:01 +10:00
Stephen Rothwell
8c8dc32248 [POWERPC] Remove old interface find_path_device
Replaced by of_find_node_by_path.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 22:08:59 +10:00
Stephen Rothwell
112466b4d0 [POWERPC] Remove find_all_nodes
This old interface has no more users.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 22:08:58 +10:00
Stephen Rothwell
4bf56e1725 [POWERPC] Remove find_compatible_devices
This is an old interface and is replaced by of_find_compatible_node.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 22:08:57 +10:00
David Gibson
6210230725 [POWERPC] Cleanup and fix breakage in tlbflush.h
BenH's commit a741e67969 in powerpc.git,
although (AFAICT) only intended to affect ppc64, also has side-effects
which break 44x.  I think 40x, 8xx and Freescale Book E are also
affected, though I haven't tested them.

The problem lies in unconditionally removing flush_tlb_pending() from
the versions of flush_tlb_mm(), flush_tlb_range() and
flush_tlb_kernel_range() used on ppc64 - which are also used the
embedded platforms mentioned above.

The patch below cleans up the convoluted #ifdef logic in tlbflush.h,
in the process restoring the necessary flushes for the software TLB
platforms.  There are three sets of definitions for the flushing
hooks: the software TLB versions (revised to avoid using names which
appear to related to TLB batching), the 32-bit hash based versions
(external functions) amd the 64-bit hash based versions (which
implement batching).

It also moves the declaration of update_mmu_cache() to always be in
tlbflush.h (previously it was in tlbflush.h except for PPC64, where it
was in pgtable.h).

Booted on Ebony (440GP) and compiled for 64-bit and 32-bit
multiplatform.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 22:08:56 +10:00
Olof Johansson
687304014f [POWERPC] Save trap number in bad_stack
Save the trap number in the case of getting a bad stack in an exception
handler. It is sometimes useful to know what exception it was that caused
this to happen. Without this, no trap number is reported.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 22:06:59 +10:00
Michael Ellerman
6cfef5b27e [POWERPC] Rename MPIC_BROKEN_U3 to MPIC_U3_HT_IRQS
Rename MPIC_BROKEN_U3 to something a little more descriptive. Its
effect is to enable support for HT irqs behind the PCI-X/HT bridge on
U3/U4 (aka. CPC9x5) parts.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 22:06:58 +10:00
Grant Likely
e3f64788d3 [POWERPC] Fix comment typo in Kurobox device tree
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 22:06:56 +10:00
Geert Uytterhoeven
4ca478e606 [POWERPC] bootwrapper: Use `unsigned long' for malloc sizes
Use `unsigned long' for malloc sizes, to match common practice and types used
by most callers and callees.
Also use `unsigned long' for integers representing pointers in simple_alloc.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@eu.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 22:06:54 +10:00
David Gibson
e58923ed14 [POWERPC] Add arch/powerpc driver for UIC, PPC4xx interrupt controller
This patch adds a driver to arch/powerpc/sysdev for the UIC, the
on-chip interrupt controller from IBM/AMCC 4xx chips.  It uses the new
irq host mapping infrastructure.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 21:32:01 +10:00
David Gibson
f65573314e [POWERPC] Re-organize Kconfig code for 4xx in arch/powerpc
Now that we always take a device tree in arch/powerpc, there's no good
reason not to allow a single kernel to support multiple embedded 4xx
boards - the correct platform code can be selected based on the device
tree information.

Therefore, this patch re-arranges the 4xx Kconfig code to allow this.
In addition we:
	- use "select" instead of depends to configure the correct
	  config options for specific 4xx CPUs and workarounds, which
	  makes the information about specific boards and CPUs less
	  scattered.
	- Some old, unused (in arch/powerpc) config options are
	  removed: WANT_EARLY_SERIAL, IBM_OCP, etc.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 21:32:00 +10:00
Ananth N Mavinakayanahalli
e6349a958b [POWERPC] kprobes: Eliminate sstep exception if instruction can be emulated
For cases when probes are placed on instructions that can be emulated,
don't take the single-step exception.

Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 21:31:58 +10:00
Ananth N Mavinakayanahalli
6888199f7f [POWERPC] Emulate more instructions in software
Emulate a few more instructions in software - especially useful during
singlestepping (xmon/kprobes).

Instructions emulated with this patch are mfcr/mtcr rX, mfxer/mtxer rX,
mflr/mtlr rX, mfctr/mtctr rX and mr rA,rB.

Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 21:31:57 +10:00
Scott Wood
5cc5133a29 [POWERPC] bootwrapper: cuboot for 83xx
This adds cuboot support for MPC83xx platforms.

A device tree used with this must have linux,stdout-path in /chosen and
linux,network-index in any network device nodes that need mac addresses
assigned.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 21:31:56 +10:00
Scott Wood
9b1c59e256 [POWERPC] bootwrapper: Add ppcboot.h
This file describes the bd_t struct, which is used by old versions of
U-boot to pass information to the kernel.  Platform code that needs to
interoperate with such firmware can use this; it should not be used for
anything new.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 21:31:55 +10:00
Scott Wood
0fdd717ed4 [POWERPC] bootwrapper: Add a cuboot platform and a cuImage target
The cuImage target will build a uImage with bootwrapper code and a device
tree.  The default device tree and platform file are determined by the
kernel configuration.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 21:31:54 +10:00
Scott Wood
270429baa9 [POWERPC] bootwrapper: Add CONFIG_DEVICE_TREE
This provides a way to tell the bootwrapper makefile which device tree to
include by default.  The wrapper can still be invoked standalone to wrap
with a different device tree without reconfiguring the kernel, if that is
desired.

The user will only be asked to provide a device tree if the platform
selects CONFIG_WANT_DEVICE_TREE.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 21:31:53 +10:00
Olof Johansson
b97d279143 [POWERPC] pasemi: GPIO MDIO of_platform driver
MDIO driver for PHY's connected via GPIO as on the PA Semi Electra
eval board.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 21:31:52 +10:00
Olof Johansson
25fc530eed [POWERPC] pasemi: PA6T oprofile support
Oprofile support for PA6T, kernel side.

Also rename the PA6T_SPRN.* defines to SPRN_PA6T.*.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 21:31:51 +10:00
Olof Johansson
7e8bddf566 [POWERPC] pasemi: Reset mpic on boot
Reset MPIC on boot to clear some timer state that firmware might
leave configured.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 21:31:50 +10:00
Olof Johansson
62357d8215 [POWERPC] pasemi: Enable one more hid bit
Minor HID change. Firmware can't know that we want this set so we have
to set it in the kernel.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 21:31:49 +10:00
Olof Johansson
df7e70a2b0 [POWERPC] pasemi: Allow 8KB config space for I/O bridge
Device 0 function 0 on the root bus is really a two-function bus agent,
but only the first function is visible. Because of this, we need to
allow config accesses into the second range. Modify the check for valid
offsets accordingly.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 21:31:48 +10:00
Josh Boyer
a14c4508f4 [POWERPC] Fix PowerPC 750CL and 750GX CPU features
PowerPC 750CL has high BATs.  The patch below adds a CPU_FTRS_750CL that
includes that.  Without it, the original firmware mappings in the high BATs
aren't cleared which continue to override the linux translations.

It also adds CPU_FTR_COMMON to CPU_FTRS_750GX for completeness.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 21:31:47 +10:00
Stephen Rothwell
b3a6d2a54b [POWERPC] Rename last get_property calls
These got added recently.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 21:31:40 +10:00
Paul Mackerras
b142eb3a5a Merge branch 'for-2.6.22' of master.kernel.org:/pub/scm/linux/kernel/git/arnd/cell-2.6 into for-2.6.22 2007-04-24 11:46:09 +10:00
Paul Mackerras
13177c8b7e Merge branch 'spufs' of master.kernel.org:/pub/scm/linux/kernel/git/arnd/cell-2.6 into for-2.6.22 2007-04-24 11:45:03 +10:00
Paul Mackerras
445c9b5507 Merge branch 'kconfig' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.22 2007-04-24 08:42:11 +10:00
Arnd Bergmann
c6d344819e [POWERPC] update cell_defconfig
Sync with the Kconfig changes, and enable some options for celleb

Cc: Ishizaki Kou <kou.ishizaki@toshiba.co.jp>
Signed-off-by: Jens Osterkamp <jens@de.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23 21:44:41 +02:00
Jeremy Kerr
150f7e3cfe [POWERPC] cell: enable RTAS-based PTCAL for Cell XDR memory
Enable Periodic Recalibration (PTCAL) support for Cell XDR memory,
using the new ibm,cbe-start-ptcal and ibm,cbe-stop-ptcal RTAS calls.

Tested on QS20 and QS21 (by Thomas Huth). It seems that SLOF has
problems disabling, at least on QS20; this patch should only be
used once these problems have been addressed.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23 21:44:41 +02:00
Christian Krafft
9dd855a729 [POWERPC] cell: add support for proper device-tree
This patch adds support for a proper device-tree.
A porper device-tree on cell contains be nodes
for each CBE containg nodes for SPEs and all the
other special devices on it.
Ofcourse oldschool devicetree is still supported.

Signed-off-by: Christian Krafft <krafft@de.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23 21:44:40 +02:00
Christian Krafft
6bf05fd776 [POWERPC] add of_iomap function
The of_iomap function maps memory for a given
device_node and returns a pointer to that memory.
This is used at some places, so it makes sense to
a seperate function.

Signed-off-by: Christian Krafft <krafft@de.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23 21:44:40 +02:00
Christian Krafft
4a065f9418 [POWERPC] pmi probe device by device-type
At the moment the pmi device driver is probing for devices with
a given type and a given name. As there may be devices of
the same type but with a different name, probing should be
done also for device type only.

Signed-off-by: Christian Krafft <krafft@de.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23 21:44:40 +02:00
Christian Krafft
79baf4a60e [POWERPC] add check for initialized driver data to pmi driver
This patch adds a check for the private driver data to be initialized.
The bug showed up, as the caller found a pmi device by it's type.
Whereas the pmi driver probes for the type and the name.
Since the name was not as the driver expected, it did not initialize.
A more relaxed probing will be supplied with an extra patch, too.

Signed-off-by: Christian Krafft <krafft@de.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23 21:44:40 +02:00
Christian Krafft
5050063c04 [POWERPC] cell: use pmi in cpufreq driver
The new PMI driver was added in order to support
cpufreq on blades that require the frequency to
be controlled by the service processor, so use it
on those.

Signed-off-by: Christian Krafft <krafft@de.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23 21:44:39 +02:00
Christian Krafft
5f7bdaee2a [POWERPC] cbe_thermal: add throttling attributes to cpu and spu nodes
This patch adds some attributes the cpu and spu nodes:
/sys/devices/system/[c|s]pu/[c|s]pu*/thermal/throttle_begin
/sys/devices/system/[c|s]pu/[c|s]pu*/thermal/throttle_end
/sys/devices/system/[c|s]pu/[c|s]pu*/thermal/throttle_full_stop

Signed-off-by: Christian Krafft <krafft@de.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23 21:44:39 +02:00
Christian Krafft
24d560d7b9 [POWERPC] cbe_thermal: clean up computation of temperature
This patch introduces a little function for transforming
register values into temperature.

Signed-off-by: Christian Krafft <krafft@de.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23 21:44:39 +02:00
Christian Krafft
91a69c9646 [POWERPC] cell: add cbe_node_to_cpu function
This patch adds code to deal with conversion of
logical cpu to cbe nodes. It removes code that
assummed there were two logical CPUs per CBE.

Signed-off-by: Christian Krafft <krafft@de.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23 21:44:38 +02:00
Jeremy Kerr
ccf17e9d00 [POWERPC] spu_base: fix initialisation on systems with no SPEs
This change fixes the case where spu_base and spufs are initialised on a
system with no SPEs - unconditionally create the spu_lists so spu_alloc
doesn't explode, and check for spu_management ops before starting spufs.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>

 arch/powerpc/platforms/cell/spu_base.c    |    7 ++++---
 arch/powerpc/platforms/cell/spufs/inode.c |    5 +++++
 2 files changed, 9 insertions(+), 3 deletions(-)
2007-04-23 21:19:00 +02:00
Christoph Hellwig
befdc746ee [POWERPC] spu_base: remove cleanup_spu_base
spu_base.c is always built into the kernel image, so there is no need
for a cleanup function.  And some of the things it does are in the
way for my following patches, so I'd rather get rid of it ASAP.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23 21:18:59 +02:00
Christoph Hellwig
aa45e2569f [POWERPC] spufs: various run.c cleanups
- remove the spu_acquire_runnable from spu_run_init.  I need to
   opencode it in spufs_run_spu in the next patch
 - remove various inline attributes, we don't really want to inline
   long functions with multiple callsites
 - cleanup return values and runcntl_write calls in spu_run_init
 - use normal kernel codingstyle in spu_reacquire_runnable

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23 21:18:59 +02:00
Akinobu Mita
fe8a29db5b [POWERPC] spufs: enable SPU coredump for kernel-builtin spufs
spu_coredump_calls.owner is NULL in case of a builtin spufs,
so the checks in here break.
Check for the availability of the spu_coredump_calls variable
instead.

Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23 21:18:59 +02:00
Arnd Bergmann
6cf2179202 [POWERPC] spufs: fix memory leak on coredump
Dynamically allocated read/write buffer in spufs_arch_write_note() will
not be freed. Convert it to get_free_page at the same time.

Cc: Akinobu Mita <mita@fixstars.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23 21:18:58 +02:00
Jeremy Kerr
d3764397d0 [POWERPC] spufs: Minor cleanup of spu_wait
Change the loop in spu_wait to be a little more straightforward.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23 21:18:58 +02:00
Jeremy Kerr
f11f5ee70f [POWERPC] spufs: add mode= mount option
Add a 'mode=' option to spufs mount arguments. This allows more
control over access to the top-level spufs directory.

Tested on Cell.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23 21:18:58 +02:00
Akinobu Mita
9e2fe2ce4e [POWERPC] spufs: use memcpy_fromio() to copy from local store
GCC may generates inline copy loop to handle memcpy() function
instead of kernel defined memcpy(). But this inlined version of memcpy()
causes an alignment interrupt when copying from local store.

This patch uses memcpy_fromio() and memcpy_toio to copy local store
to prevent memcpy() being inlined.

Signed-off-by: Akinobu Mita <mita@fixstars.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23 21:18:57 +02:00
Christoph Hellwig
8a7d86bdb2 [POWERPC] spufs: avoid spurious memory barriers
We now have proper locking around assignets of the mapping pointers,
and the spin_unlock implies enough of a barrier to get rid of the
explicit one.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23 21:18:57 +02:00
Akinobu Mita
db1384b40d [POWERPC] spufs: fix memory leak on spufs reloading
When SPU isolation mode enabled, isolated_loader would be
allocated by spufs_init_isolated_loader() on module_init().
But anyone do not free it.

This patch introduces spufs_exit_isolated_loader() which is
the opposite of spufs_init_isolated_loader() and called on
module_exit().

Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Akinobu Mita <mita@fixstars.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23 21:18:57 +02:00
Akinobu Mita
c99c1994a2 [POWERPC] spufs: fix missing error handling in module_init()
spufs module_init forgot to call a few cleanup functions
on error path. This patch also includes cosmetic changes in
spu_sched_init() (identation fix and return error code).

[modified by hch to apply ontop of the latest schedule changes]

Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Akinobu Mita <mita@fixstars.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23 21:18:56 +02:00
Akinobu Mita
577f8f1021 [POWERPC] spufs: check spu_acquire_runnable() return value
This patch checks return value of spu_acquire_runnable() in
spufs_mfc_write().

Signed-off-by: Akinobu Mita <mita@fixstars.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23 21:18:56 +02:00
Christoph Hellwig
e45d48a34d [POWERPC] spufs: turn run_sema into run_mutex
There is no reason for run_sema to be a struct semaphore.  Changing
it to a mutex and rename it accordingly.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23 21:18:56 +02:00
Jeremy Kerr
c8a1e9393a [POWERPC] spufs: provide siginfo for SPE faults
This change populates a siginfo struct for SPE application exceptions
(ie, invalid DMAs and illegal instructions).

Tested on an IBM Cell Blade.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23 21:18:55 +02:00
Arnd Bergmann
57dace2391 [POWERPC] spufs: make spu page faults not block scheduling
Until now, we have always entered the spu page fault handler
with a mutex for the spu context held. This has multiple
bad side-effects:
- it becomes impossible to suspend the context during
  page faults
- if an spu program attempts to access its own mmio
  areas through DMA, we get an immediate livelock when
  the nopage function tries to acquire the same mutex

This patch makes the page fault logic operate on a
struct spu_context instead of a struct spu, and moves it
from spu_base.c to a new file fault.c inside of spufs.

We now also need to copy the dar and dsisr contents
of the last fault into the saved context to have it
accessible in case we schedule out the context before
activating the page fault handler.

Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23 21:18:55 +02:00
Christoph Hellwig
62c05d583e [POWERPC] spu_base: move spu_init_channels out of spu_mutex
There is no reason to execute spu_init_channels under spu_mutex
after the spu has been taken off the freelist it's ours.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23 21:18:55 +02:00
Luke Browning
4e0f4ed0df [POWERPC] spu sched: make addition to stop_wq and runque atomic vs wakeup
Addition to stop_wq needs to happen before adding to the runqeueue and
under the same lock so that we don't have a race window for a lost
wake up in the spu scheduler.

Signed-off-by: Luke Browning <lukebrowning@us.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23 21:18:55 +02:00
Christoph Hellwig
7ec18ab923 [POWERPC] spufs: streamline locking for isolated spu setup
For quite a while now spu state is protected by a simple mutex instead
of the old rw_semaphore, and this means we can simplify the locking
around spu_setup_isolated a lot.

Instead of doing an spu_release before entering spu_setup_isolated and
then calling the complicated spu_acquire_exclusive we can now simply
enter the function locked an in guaranteed runnable state, so that the
only bit of spu_acquire_exclusive that's left is the call to
spu_unmap_mappings.

Similarly there's no more need to unlock and reacquire the state_mutex
when spu_setup_isolated is done, but we can always return with the
lock held and only drop it in spu_run_init in the failure case.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23 21:18:54 +02:00
Christoph Hellwig
a475c2f435 [POWERPC] spufs: remove woken threads from the runqueue early
A single context should only be woken once, and we should not have
more wakeups for a given priority than the number of contexts on
that runqueue position.

Also add some asserts to trap future problems in this area more
easily.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23 21:18:54 +02:00
Arnd Bergmann
390c534304 [POWERPC] spufs: add memory barriers after set_bit
set_bit does not guarantee ordering on powerpc, so using it
for communication between threads requires explicit
mb() calls.

Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23 21:18:54 +02:00
Christoph Hellwig
e097b51328 [POWERPC] spu sched: ensure preempted threads are put back on the runqueue, part2
To not lose a spu thread we need to make sure it always gets put back
on the runqueue.  In find_victim aswell as in the scheduler tick as done
in the previous patch.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23 21:18:53 +02:00
Christoph Hellwig
b3e76cc324 [POWERPC] spu sched: ensure preempted threads are put back on the runqueue
To not lose a spu thread we need to make sure it always gets put back
on the runqueue.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23 21:18:53 +02:00
Christoph Hellwig
43c2bbd932 [POWERPC] spufs: clear mapping pointers after last close
Make sure the pointers to various mappings are cleared once the last
user stopped using them.  This avoids accessing freed memory when
tearing down the gang directory aswell as optimizing away
pte invalidations if no one uses these.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23 21:18:53 +02:00
Christoph Hellwig
0887309589 [POWERPC] spufs: use cancel_rearming_delayed_workqueue when stopping spu contexts
The scheduler workqueue may rearm itself and deadlock when we try to stop
it.  Put a flag in place to avoid skip the work if we're tearing down
the context.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23 21:18:52 +02:00
Paul Mackerras
390cbb56a7 [POWERPC] Fix detection of loader-supplied initrd on OF platforms
Commit 79c8541924 introduced code to move
the initrd if it was in a place where it would get overwritten by the
kernel image.  Unfortunately this exposed the fact that the code that
checks whether the values passed in r3 and r4 are intended to indicate
the start address and size of an initrd image was not as thorough as the
kernel's checks.  The symptom is that on OF-based platforms, the
bootwrapper can cause an exception which causes the system to drop back
into OF.

Previously it didn't matter so much if the code incorrectly thought that
there was an initrd, since the values for start and size were just passed
through to the kernel.  Now the bootwrapper needs to apply the same checks
as the kernel since it is now using the initrd data itself (in the process
of copying it if necessary).  This adds the code to do that.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 10:46:21 +10:00
Kumar Gala
98750261fb [POWERPC] Miscellaneous arch/powerpc Kconfig and platform/Kconfig cleanup
* Cleaned up some whitespace in arch/powerpc/Kconfig
* Moved sourcing of platforms/embedded6xx/Kconfig into platform/Kconfig
* Moved sourcing of platforms/4xx/Kconfig into platform/Kconfig and disabled it
* Removed EMBEDDEDBOOT since its not supported in arch/powerpc
* Removed PC_KEYBOARD since its not used anywhere
* Moved a few CONFIG options around in platform/Kconfig
* Moved interrupt controllers into platform/Kconfig out of bus section

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-04-12 18:01:34 -05:00
Kumar Gala
db9478086d [POWERPC] Convert 85xx platform to unified platform Kconfig
Moved 85xx platform Kconfig over to being sourced by the unified
arch/powerpc/platforms/Kconfig.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-04-12 17:44:07 -05:00
Kumar Gala
c8a55f3dda [POWERPC] Convert 8xx platform to unified platform Kconfig
Moved 8xx platform Kconfig over to being sourced by the unified
arch/powerpc/platforms/Kconfig.  Also, cleaned up whitespace issues in 8xx
Kconfig.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-04-12 17:35:54 -05:00
Kumar Gala
d6071f881f [POWERPC] Convert 82xx platform to unified platform Kconfig
Moved 82xx platform Kconfig over to being sourced by the unified
arch/powerpc/platforms/Kconfig.  Also, cleaned up whitespace issues in 82xx
Kconfig.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-04-12 16:53:32 -05:00
Kumar Gala
b5a4834692 [POWERPC] Convert 83xx platform to unified platform Kconfig
Moved 83xx platform Kconfig over to being sourced by the unified
arch/powerpc/platforms/Kconfig.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-04-12 16:41:12 -05:00
Kumar Gala
4a89f7fa7a [POWERPC] Convert 86xx platform to unified platform Kconfig
Moved 86xx platform Kconfig over to being sourced by the unified
arch/powerpc/platforms/Kconfig.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-04-12 15:41:26 -05:00
Kumar Gala
164a460d46 [POWERPC] Ensure platform CONFIG options have correct dependencies
We currently support TAU and CPU frequency scaling only on discrete
(non-SOC) processors.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-04-12 15:35:50 -05:00
Joachim Fenkes
0727702a3a [POWERPC] ibmebus: change probe/remove interface from using loc-code to DT path
In some cases, multiple OFDT nodes might share the same location code, so
the location code is not a unique identifier for an OFDT node. Changed the
ibmebus probe/remove interface to use the DT path of the device node instead
of the location code.

The DT path must be written into probe/remove right as it would appear in
the "devspec" attribute of the ebus device: relative to the DT root, with a
leading slash and without a trailing slash. One trailing newline will not
hurt; multiple newlines will (like perl's chomp()).

Example:

 Add a device "/proc/device-tree/foo@12345678" to ibmebus like this:
    echo /foo@12345678 > /sys/bus/ibmebus/probe

 Remove the device like this:
    echo /foo@12345678 > /sys/bus/ibmebus/remove

Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 06:12:42 +10:00
Benjamin Herrenschmidt
370a908db1 [POWERPC] DEBUG_PAGEALLOC for 64-bit
Here's an implementation of DEBUG_PAGEALLOC for 64 bits powerpc.
It applies on top of the 32 bits patch.

Unlike Anton's previous attempt, I'm not using updatepp. I'm removing
the hash entries from the bolted mapping (using a map in RAM of all the
slots). Expensive but it doesn't really matter, does it ? :-)

Memory hot-added doesn't benefit from this unless it's added at an
address that is below end_of_DRAM() as calculated at boot time.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

 arch/powerpc/Kconfig.debug      |    2
 arch/powerpc/mm/hash_utils_64.c |   84 ++++++++++++++++++++++++++++++++++++++--
 2 files changed, 82 insertions(+), 4 deletions(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 04:09:39 +10:00
Benjamin Herrenschmidt
88df6e90fa [POWERPC] DEBUG_PAGEALLOC for 32-bit
Here's an implementation of DEBUG_PAGEALLOC for ppc32. It disables BAT
mapping and is only tested with Hash table based processor though it
shouldn't be too hard to adapt it to others.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

 arch/powerpc/Kconfig.debug       |    9 ++++++
 arch/powerpc/mm/init_32.c        |    4 +++
 arch/powerpc/mm/pgtable_32.c     |   52 +++++++++++++++++++++++++++++++++++++++
 arch/powerpc/mm/ppc_mmu_32.c     |    4 ++-
 include/asm-powerpc/cacheflush.h |    6 ++++
 5 files changed, 74 insertions(+), 1 deletion(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 04:09:39 +10:00
Benjamin Herrenschmidt
ee4f2ea486 [POWERPC] Fix 32-bit mm operations when not using BATs
On hash table based 32 bits powerpc's, the hash management code runs with
a big spinlock. It's thus important that it never causes itself a hash
fault. That code is generally safe (it does memory accesses in real mode
among other things) with the exception of the actual access to the code
itself. That is, the kernel text needs to be accessible without taking
a hash miss exceptions.

This is currently guaranteed by having a BAT register mapping part of the
linear mapping permanently, which includes the kernel text. But this is
not true if using the "nobats" kernel command line option (which can be
useful for debugging) and will not be true when using DEBUG_PAGEALLOC
implemented in a subsequent patch.

This patch fixes this by pre-faulting in the hash table pages that hit
the kernel text, and making sure we never evict such a page under hash
pressure.

Signed-off-by: Benjamin Herrenchmidt <benh@kernel.crashing.org>

 arch/powerpc/mm/hash_low_32.S |   22 ++++++++++++++++++++--
 arch/powerpc/mm/mem.c         |    3 ---
 arch/powerpc/mm/mmu_decl.h    |    4 ++++
 arch/powerpc/mm/pgtable_32.c  |   11 +++++++----
 4 files changed, 31 insertions(+), 9 deletions(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 04:09:39 +10:00
Benjamin Herrenschmidt
3be4e6990e [POWERPC] Cleanup 32-bit map_page
The 32 bits map_page() function is used internally by the mm code
for early mmu mappings and for ioremap. It should never be called
for an address that already has a valid PTE or hash entry, so we
add a BUG_ON for that and remove the useless flush_HPTE call.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

 arch/powerpc/mm/pgtable_32.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 04:09:39 +10:00
Benjamin Herrenschmidt
a741e67969 [POWERPC] Make tlb flush batch use lazy MMU mode
The current tlb flush code on powerpc 64 bits has a subtle race since we
lost the page table lock due to the possible faulting in of new PTEs
after a previous one has been removed but before the corresponding hash
entry has been evicted, which can leads to all sort of fatal problems.

This patch reworks the batch code completely. It doesn't use the mmu_gather
stuff anymore. Instead, we use the lazy mmu hooks that were added by the
paravirt code. They have the nice property that the enter/leave lazy mmu
mode pair is always fully contained by the PTE lock for a given range
of PTEs. Thus we can guarantee that all batches are flushed on a given
CPU before it drops that lock.

We also generalize batching for any PTE update that require a flush.

Batching is now enabled on a CPU by arch_enter_lazy_mmu_mode() and
disabled by arch_leave_lazy_mmu_mode(). The code epects that this is
always contained within a PTE lock section so no preemption can happen
and no PTE insertion in that range from another CPU. When batching
is enabled on a CPU, every PTE updates that need a hash flush will
use the batch for that flush.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 04:09:38 +10:00
Benjamin Herrenschmidt
e4ee3891db [POWERPC] Alignment exception uses __get/put_user_inatomic
Make the alignment exception handler use the new _inatomic variants
of __get/put_user. This fixes erroneous warnings in the very rare
cases where we manage to have copy_tofrom_user_inatomic() trigger
an alignment exception.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

 arch/powerpc/kernel/align.c |   56 ++++++++++++++++++++++++--------------------
 1 file changed, 31 insertions(+), 25 deletions(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 04:09:38 +10:00
Milind Arun Choudhary
06533e28c9 [POWERPC] Clean up unused ROUND_UP, NAME_OFFSET macros in arch/powerpc
Unused ROUND_UP, NAME_OFFSET macro cleanup

Signed-off-by: Milind Arun Choudhary <milindchoudhary@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 04:00:41 +10:00
Olaf Hering
e48059225c [POWERPC] Add correct interrupt property for pegasos ide
The firmware assigns irq 20/21 to the VIA IDE device on Pegasos.
But the required interrupt is 14/15.
Maybe someone confused decimal vs. hexadecimal values.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 04:00:25 +10:00
Stephen Rothwell
9c1a2bae0c [POWERPC] Rename get_property to of_get_property: the last one
This also fixes a bug where a property value was being modified
in place.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:19 +10:00
Stephen Rothwell
e2eb63927b [POWERPC] Rename get_property to of_get_property: arch/powerpc
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:19 +10:00
Paul Mackerras
721151d004 [POWERPC] Allow drivers to map individual 4k pages to userspace
Some drivers have resources that they want to be able to map into
userspace that are 4k in size.  On a kernel configured with 64k pages
we currently end up mapping the 4k we want plus another 60k of
physical address space, which could contain anything.  This can
introduce security problems, for example in the case of an infiniband
adaptor where the other 60k could contain registers that some other
program is using for its communications.

This patch adds a new function, remap_4k_pfn, which drivers can use to
map a single 4k page to userspace regardless of whether the kernel is
using a 4k or a 64k page size.  Like remap_pfn_range, it would
typically be called in a driver's mmap function.  It only maps a
single 4k page, which on a 64k page kernel appears replicated 16 times
throughout a 64k page.  On a 4k page kernel it reduces to a call to
remap_pfn_range.

The way this works on a 64k kernel is that a new bit, _PAGE_4K_PFN,
gets set on the linux PTE.  This alters the way that __hash_page_4K
computes the real address to put in the HPTE.  The RPN field of the
linux PTE becomes the 4k RPN directly rather than being interpreted as
a 64k RPN.  Since the RPN field is 32 bits, this means that physical
addresses being mapped with remap_4k_pfn have to be below 2^44,
i.e. 0x100000000000.

The patch also factors out the code in arch/powerpc/mm/hash_utils_64.c
that deals with demoting a process to use 4k pages into one function
that gets called in the various different places where we need to do
that.  There were some discrepancies between exactly what was done in
the various places, such as a call to spu_flush_all_slbs in one case
but not in others.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:18 +10:00
Stephen Rothwell
1a38147ed0 [POWERPC] Make struct property's value a void *
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:18 +10:00
Stephen Rothwell
9213feea6e [POWERPC] Rename prom_n_size_cells to of_n_size_cells
This is more consistent and gets us closer to the Sparc code.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:18 +10:00
Stephen Rothwell
a8bda5dd4f [POWERPC] Rename prom_n_addr_cells to of_n_addr_cells
This is more consistent and gets us closer to the Sparc code.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:18 +10:00
Stephen Rothwell
7a92f74f98 [POWERPC] Rename device_is_compatible to of_device_is_compatible
This is more consistent and gets us closer to the Sparc code.

We add a device_is_compatible define for compatibility during the
change over.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:18 +10:00
Stephen Rothwell
0e56efc7dc [POWERPC] Rename get_property to of_get_property
This is more consistent and gets us closer to the Sparc code.

We add a get_property define for compatibility during the change over.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:17 +10:00
Olaf Hering
9414715a7b [POWERPC] Autodetect serial console on efika
Efika boards have to be booted with console=ttyPSC0 unless there is a
graphics card plugged in. Detect if the firmware stdout is the serial
connector.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:17 +10:00
Milton Miller
02cc51149f [POWERPC] bootwrapper: Decompress less, check more
Our kernels put everything in the first load segment, and we read that.
Instead of decompressing to the end of the gzip stream or supplied image
and hoping we get it all, decompress the expected size and complain if
it is not available.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:17 +10:00
Milton Miller
1383a34faf [POWERPC] bootwrapper: no-gzip fixes
Commit a9903811bf missed two uses of the
the .gz suffix in the wrapper script and didn't clean the additonal
possibly cached files.

Signed-off-by: Milton Miller <miltonm@bga.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:16 +10:00
Milton Miller
f4bdbfc41b [POWERPC] bootwrapper: missing relocation in crt0.S
crt0.S had provisions to provide run address relocaton to got2 and
cache flush, but not on the bss clear or stack pointer load.  Apply
the same fixup for them.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:16 +10:00
Mark A. Greer
d6f1d2a9a8 [POWERPC] Routine to find the devtree node of a linux,phandle
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:16 +10:00
Mark A. Greer
88e687313e [POWERPC] Move bootwrapper ELF parsing routines to a file
The ELF parsing routines local to arch/powerpc/boot/main.c are useful
to other callers therefore move them to their own file.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:16 +10:00
Giuliano Pochini
5e41763ae9 [POWERPC] Fix breakage caused by 72486f1f8f
72486f1f8f inverted the sense for enabling
hotplug CPU controls without reference to any other architecture other than
i386, ia64 and PowerPC.  This left everyone else without hotplug CPU control.

Fix powerpc for this brain damage.

(akpm: patch adapted from rmk's ARM fix.  Changelog stolen from rmk)

Signed-off-by: Giuliano Pochini <pochini@shiny.it>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:16 +10:00
Scott Wood
6e1af384f1 [POWERPC] bootwrapper: Add dt_xlate_reg(), and use it to find serial registers.
dt_xlate_reg() uses the ranges properties of a node's parentage to find
the absolute physical address of the node's registers.

The ns16550 driver uses this when no virtual-reg property is found.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:15 +10:00
Christoph Hellwig
dbf8eefa2b [POWERPC] spufs: don't yield CPU in spu_yield
There is no reason to yield the CPU in spu_yield - if the backing
thread reenters spu_run it gets added to the end of the runqueue for
it's priority.  So the yield is just a slowdown for the case where
we have higher priority contexts waiting.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:15 +10:00
Geert Uytterhoeven
28066ae91b [POWERPC] CBE thermal support on PS3
I wanted to enable CBE_THERM on PS3.  So I had to enable CBE_RAS first.

But the resulting kernel doesn't link, as cbe_regs.c isn't compiled for
non-PPC_CELL_NATIVE.

CBE_RAS should depend on PPC_CELL_NATIVE; this makes it so.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:15 +10:00
Sonny Rao
a5bcbcaff2 [POWERPC] Remove stale comment from head_64.S
This is now inaccurate because we may not have entered prom_init() and
r3 is overwritten immediately anyway.

Signed-off-by: Sonny Rao <sonny@burdell.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:14 +10:00
Olaf Hering
8545cd2011 [POWERPC] Remove unused inclusion of linux/ide.h
Remove unneeded inclusion of linux/ide.h
It does not compile with CONFIG_BLOCK=n.

Remove asm/ide.h from ksyms file, it gets included earlier via
linux/ide.h.

Compile tested with all defconfig files.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:14 +10:00
Olaf Hering
c3b9d9ab96 [POWERPC] Fix link errors when EEH is disabled
Fix link errors with CONFIG_EEH=n:

arch/powerpc/platforms/built-in.o: In function `.pcibios_fixup_new_pci_devices':
(.text+0x41c8): undefined reference to `.eeh_add_device_tree_late'
arch/powerpc/platforms/built-in.o: In function `.init_phb_dynamic':
(.text+0x4280): undefined reference to `.eeh_add_device_tree_early'
arch/powerpc/platforms/built-in.o: In function `.pcibios_remove_pci_devices':
(.text+0x42fc): undefined reference to `.eeh_remove_bus_device'
arch/powerpc/platforms/built-in.o: In function `.pcibios_add_pci_devices':
(.text+0x43c0): undefined reference to `.eeh_add_device_tree_early'
arch/powerpc/platforms/built-in.o: In function `.pSeries_final_fixup':
(.init.text+0xb4): undefined reference to `.pci_addr_cache_build'
make[1]: *** [.tmp_vmlinux1] Error 1

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:14 +10:00
David Gibson
3af82a8b00 [POWERPC] Clean up zImage handling of the command line
This cleans up how the zImage code manipulates the kernel
command line.  Notable improvements from the old handling:
	- Command line manipulation is consolidated into a new
prep_cmdline() function, rather than being scattered across start()
and some helper functions
	- Less stack space use: we use just a single global command
line buffer, which can be initialized by an external tool as before,
we no longer need another command line sized buffer on the stack.
	- Easier to support platforms whose firmware passes a
commandline, but not a device tree.  Platform code can now point new
loader_info fields to the firmware's command line, rather than having
to do early manipulation of the /chosen bootargs property which may
then be rewritten again by the core.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:14 +10:00
David Gibson
27fbaa9702 [POWERPC] Add device tree utility functions to zImage
This patch adds a library of useful device tree manipulation functions
to the zImage library, for use by platform code.  These functions are
based on the hooks already in dt_ops, so they're not dependent on a
particular device tree implementation.  This patch also slightly
streamlines the code in main.c using these new functions.

This is a consolidation of my work in this area with Scott Wood's
patches to a very similar end.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:14 +10:00
Olof Johansson
3467bfd340 [POWERPC] Use mtocrf instruction in asm when CONFIG_POWER4_ONLY=y
mtocrf is a faster single-field mtcrf (move to condition register
fields) instruction available in POWER4 and later processors.  It can
make quite a difference in performance on some implementations, so use
it for CONFIG_POWER4_ONLY builds.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:13 +10:00
Jake Moilanen
569975591c [POWERPC] DMA 4GB boundary protection
There are many adapters which cannot handle DMAing across any 4 GB
boundary.  For instance, the latest Emulex adapters.

This normally is not an issue as firmware gives dma-windows under
4gigs.  However, some of the new System-P boxes have dma-windows above
4gigs, and this present a problem.

During initialization of the IOMMU tables, the last entry at each 4GB
boundary is marked as used.  Thus no mappings can cross the boundary.
If a table ends at a 4GB boundary, the entry is not marked as used.

A boot option to remove this 4GB protection is given w/ protect4gb=off.
This exposes the potential issue for driver and hardware development
purposes.

Signed-off-by: Jake Moilanen <moilanen@austin.ibm.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:13 +10:00
Sylvain Munaut
1f9209cfe0 [POWERPC] Add uevent handler for of_platform_bus
Adding this handler allow userspace to properly handle the module
autoloading. The generation of the uevent itself is now common to
all bus using of_device, so not much code here.

Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:13 +10:00
Sylvain Munaut
eb0cb8a07e [POWERPC] Add a unified uevent handler for bus based on of_device
This common uevent handler allow the several bus types based on
of_device to generate the uevent properly and avoiding
code duplication.

This handlers take a struct device as argument and can therefore
be used as the uevent call directly if no special treatment is
needed for the bus.

Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:13 +10:00
Paul Mackerras
e049d1ca30 Merge branch 'linux-2.6' into for-2.6.22 2007-04-13 03:50:03 +10:00
Domen Puncer
22132178b2 [POWERPC] mpc52xx_pic: fix main interrupt masking
The bit setting was off by one.
Tested with RTC and GPIO_WKUP interrupts.

Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-12 02:39:58 +10:00
Jon Loeliger
edfac96a92 [POWERPC] 85xx: Add initial MPC8544DS basic port defconfig.
Signed-off-by: Xianghua Xiao <x.xiao@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-03-29 19:39:51 -05:00
Jon Loeliger
d93daf8481 [POWERPC] 85xx: Add initial MPC8544 DS platform files.
This patch provides the basic MPC8544 DS platform code and config.
Follow-up patches will add peripherals such as PCI and SATA.

Signed-off-by: Xianghua Xiao <x.xiao@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-03-29 19:39:27 -05:00
Michael Barkowski
23308c54d5 [POWERPC] 83xx: Add MPC832x RDB board support.
Add support for the MPC8323E Reference Development Board (RDB).  The board
is a mini-ITX reference board with 64M DDR2, 16M flash, USB, PCI,
10/100 ethernet, serial, and phone ports.

Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-03-29 14:54:39 -05:00
Chuck Meade
7f013bc9d0 [POWERPC] qe: Fix QUICC Engine SDMA setup errors
Correct the alignment of the internal buffer used by the QUICC Engine
SDMA controller to 4Kbytes.  Correct the shift direction in the logic
that sets up the SDMR register for the QUICC Engine SDMA controller.

Signed-off-by: Chuck Meade <chuckmeade@mindspring.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-03-29 14:33:42 -05:00
Jean-Christophe Dubois
190a4408ec [POWERPC] Fix dcr_unmap()
Fix a bug in dcr_unmap().

At unmap time the DCR offset need to be added instead of substracted.

Signed-off-by: Jean-Christophe Dubois <jdubois@mc.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-29 09:49:23 +10:00
Kumar Gala
1a4d9399a9 [POWERPC] 83xx: Removed dead header
mpc832x_mds.h was exporting a function that didn't exist anymore.  Once removed
the header had no purpose.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-03-26 17:06:42 -05:00
Timur Tabi
de74f70360 [POWERPC] QE: fix invalid pointer usage in ucc_slow_init()
In two places, ucc_slow_init() passes a physical address instead of the
virtual address to functions that were expecting the latter, causing a kernel
panic.  us_info->regs contains the physical address of the UCC register set.
The registers are ioremap'd to kernel space, and the virtual pointers are
stored in us_regs.  The code was using us_info->regs when it should have been
using us_regs.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-03-26 17:06:22 -05:00
Robert P. J. Day
8b03336752 [POWERPC] 83xx: Delete unused header file.
Delete apparently unused header file
arch/powerpc/platforms/83xx/mpc834x_itx.h.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-03-26 17:06:02 -05:00
Timur Tabi
7d776cb596 [POWERPC] QE: automatically select QE options
Change the Kconfig files so that the Freescale QE options are automatically
selected if a QE device is selected.  Previously, you'd need to manually
select UCC_FAST if you want any "fast" UCC devices, such as Gigabit Ethernet.
Now, the QE Gigabit Ethernet option is always available if the device has a
QE, and UCC_FAST is automatically enabled.  A side-effect is that the
"QE Options" menu no longer exists.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-03-26 17:05:22 -05:00
Zang Roy-r61911
9eb90a0c3b [POWERPC] 86xx/85xx: Unify Freescale PCI Express memory map registers structure
Unify PCI Express memory map registers structure define
to arch/pwoerpc/sysdev/fsl_pcie.h for Freescale 85xx/86xx
processor family.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-03-26 17:03:49 -05:00
Jon Loeliger
3e4e97f42e [POWERPC] 86xx/85xx: Move 8641 PCI-Express to arch/powerpc/sysdev/fsl_pcie.c.
This move sets the stage for the use of generic PCI Express
code in 85xx and 86xx parts from FSL.  Subsequent patches
for 8548 and 8544 will be able to use this shared code.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
Acked-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-03-26 17:03:25 -05:00
Zhang Wei
e0e3c8d432 [POWERPC] 86xx: Added 2nd PCI-Ex controller support for MPC8641 HPCN to DTS.
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-03-26 17:02:40 -05:00
David Gibson
e5a2072bd4 [POWERPC] New reg.h for the zImage
This patch adds a reg.h to the zImage code, with common definitions
for accessing system registers.  For now, this includes functions for
retrieving the PVR and the stack pointer.  This patch then uses the
new reg.h to let start() display the running stack address without
having to explicitly pass the stack as a parameter from the asm code.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-26 15:11:20 +10:00
David Gibson
fae59c39e8 [POWERPC] Add gcc format warnings to zImage printf()
This patch adds the correct attributes to the zImage's versions of
printf to make gcc generate format string mismatch warnings.  It also
corrects several minor problems with format strings in the zImage thus
discovered.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-26 15:11:20 +10:00