Commit graph

226 commits

Author SHA1 Message Date
NeilBrown
006a09a0ae md/raid10 - support resizing some RAID10 arrays.
'resizing' an array in this context means making use of extra
space that has become available in component devices, not adding new
devices.
It also includes shrinking the array to take up less space of
component devices.

This is not supported for array with a 'far' layout.  However
for 'near' and 'offset' layout arrays, adding and removing space at
the end of the devices is easy to support, and this patch provides
that support.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-03-19 12:46:40 +11:00
NeilBrown
050b66152f md/raid10: handle merge_bvec_fn in member devices.
Currently we don't honour merge_bvec_fn in member devices so if there
is one, we force all requests to be single-page at most.
This is not ideal.

So enhance the raid10 merge_bvec_fn to check that function in children
as well.

This introduces a small problem.  There is no locking around calls
the ->merge_bvec_fn and subsequent calls to ->make_request.  So a
device added between these could end up getting a request which
violates its merge_bvec_fn.

Currently the best we can do is synchronize_sched().  This will work
providing no preemption happens.  If there is preemption, we just
have to hope that new devices are largely consistent with old devices.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-03-19 12:46:39 +11:00
NeilBrown
dafb20fa34 md: tidy up rdev_for_each usage.
md.h has an 'rdev_for_each()' macro for iterating the rdevs in an
mddev.  However it uses the 'safe' version of list_for_each_entry,
and so requires the extra variable, but doesn't include 'safe' in the
name, which is useful documentation.

Consequently some places use this safe version without needing it, and
many use an explicity list_for_each entry.

So:
 - rename rdev_for_each to rdev_for_each_safe
 - create a new rdev_for_each which uses the plain
   list_for_each_entry,
 - use the 'safe' version only where needed, and convert all other
   list_for_each_entry calls to use rdev_for_each.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-03-19 12:46:39 +11:00
NeilBrown
d6b42dcb99 md/raid1,raid10: avoid deadlock during resync/recovery.
If RAID1 or RAID10 is used under LVM or some other stacking
block device, it is possible to enter a deadlock during
resync or recovery.
This can happen if the upper level block device creates
two requests to the RAID1 or RAID10.  The first request gets
processed, blocks recovery and queue requests for underlying
requests in current->bio_list.  A resync request then starts
which will wait for those requests and block new IO.

But then the second request to the RAID1/10 will be attempted
and it cannot progress until the resync request completes,
which cannot progress until the underlying device requests complete,
which are on a queue behind that second request.

So allow that second request to proceed even though there is
a resync request about to start.

This is suitable for any -stable kernel.

Cc: stable@vger.kernel.org
Reported-by: Ray Morris <support@bettercgi.com>
Tested-by: Ray Morris <support@bettercgi.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-03-19 12:46:38 +11:00
NeilBrown
dc10c643e8 md: allow re-add to failed arrays.
When an array is failed (some data inaccessible) then there is no
point attempting to add a spare as it could not possibly be recovered.

However that may be value in re-adding a recently removed device.
e.g. if there is a write-intent-bitmap and it is clear, then access
to the data could be restored by this action.

So don't reject a re-add to a failed array for RAID10 and RAID5 (the
only arrays  types that check for a failed array).

Signed-off-by: NeilBrown <neilb@suse.de>
2012-03-19 12:46:37 +11:00
NeilBrown
547414d19f md/raid10: remove unnecessary smp_mb() from end_sync_write
Recent commit 4ca40c2ce0 (md/raid10: Allow replacement device ...)
added an smp_mb in end_sync_write.
This was to close a possible race with raid10_remove_disk.
However there is no such race as it is never attempted to remove a
disk while resync (or recovery) is happening.
so the smp_mb is just noise.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-03-13 11:21:20 +11:00
NeilBrown
7a90484825 md/raid10: fix assembling of arrays with replacement devices.
commit 56a2559bb6 (md/raid10: recognise replacements ...)
changed 'run' to set ->replacement or ->rdev depending on the
'Replacement' status if the device, but it didn't remove the
old unconditional setting of 'rdev'.  So it was largely ineffective.

So remove that now.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-03-06 10:12:45 +11:00
NeilBrown
fae8cc5ed0 md/raid10: fix handling of error on last working device in array.
If we get a read error on the last working device in a RAID10 which
contains the target block, then we don't fail the device (which is
good) but we don't abort retries, which is wrong.
We end up in an infinite loop retrying the read on the one device.

This patch fixes the problem in two places:
1/ in raid10_end_read_request we don't even ask for a retry if this
   was the last usable device.  This is efficient but a little racy
   and will sometimes retry when it should not.

2/ in handle_read_error we are careful to exclude any device from
   retry which we tried to mark as faulty (that might have failed if
   it was the last device).  This is race-free but less efficient.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-02-14 11:10:10 +11:00
NeilBrown
b7044d41b5 md/raid10: If there is a spare and a want_replacement device, start replacement.
When attempting to add a spare to a RAID10 array, also consider
adding it as a replacement for a want_replacement device.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:56 +11:00
NeilBrown
56a2559bb6 md/raid10: recognise replacements when assembling array.
If a Replacement is seen, file it as such.

If we see two replacements (or two normal devices) for the one slot,
abort.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
NeilBrown
4ca40c2ce0 md/raid10: Allow replacement device to be replace old drive.
When recovery finish and spare_active is called, check for a
replace that might have just become fully synced and mark it
as such, marking the original as failed.

Then when the original is removed, move the replacement into
its position.

This means that 'replacement' and spontaneously become NULL in some
situations.  Make sure we check for those.
It also means that 'rdev' and 'replacement' could appear to be
identical - check for that too.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
NeilBrown
24afd80d99 md/raid10: handle recovery of replacement devices.
If there is a replacement device, then recover to it,
reading from any drives - maybe the one being replaced, maybe not.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
NeilBrown
9ad1aefc8a md/raid10: Handle replacement devices during resync.
If we need to resync an array which has replacement devices,
we always write any block checked to every replacement.

If the resync was bitmap-based resync we will then complete the
replacement normally.
If it was a full resync, we mark the replacements as fully recovered
when the resync finishes so no further recovery is needed.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
NeilBrown
475b0321a4 md/raid10: writes should get directed to replacement as well as original.
When writing, we need to submit two writes, one to the original,
and one to the replacements - if there is a replacement.

If the write to the replacement results in a write error we just
fail the device.  We only try to record write errors to the
original.

This only handles writing new data.  Writing for resync/recovery
will come later.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:55 +11:00
NeilBrown
c8ab903ea9 md/raid10: allow removal of failed replacement devices.
Enhance raid10_remove_disk to be able to remove ->replacement
as well as ->rdev

Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
NeilBrown
abbf098e6e md/raid10: preferentially read from replacement device if possible.
When reading (for array reads, not for recovery etc) we read from the
replacement device if it has recovered far enough.
This requires storing the chosen rdev in the 'r10_bio' so we can make
sure to drop the ref on the right device when the read finishes.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
NeilBrown
96c3fd1f38 md/raid10: change read_balance to return an rdev
It makes more sense to return an rdev than just an index as
read_balance() gets a reference to the rdev and so returning
the pointer make this more idiomatic.

This will be needed in a future patch when we might return
a 'replacement' rdev instead of the main rdev.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
NeilBrown
69335ef3bc md/raid10: prepare data structures for handling replacement.
Allow each slot in the RAID10 to have 2 devices, the want_replacement
and the replacement.

Also an r10bio to have 2 bios, and for resync/recovery allocate the
second bio if there are any replacement devices.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:54 +11:00
NeilBrown
b8321b68d1 md: change hot_remove_disk to take an rdev rather than a number.
Soon an array will be able to have multiple devices with the
same raid_disk number (an original and a replacement).  So removing
a device based on the number won't work.  So pass the actual device
handle instead.

Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23 10:17:51 +11:00
Linus Torvalds
32aaeffbd4 Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
  Revert "tracing: Include module.h in define_trace.h"
  irq: don't put module.h into irq.h for tracking irqgen modules.
  bluetooth: macroize two small inlines to avoid module.h
  ip_vs.h: fix implicit use of module_get/module_put from module.h
  nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
  include: replace linux/module.h with "struct module" wherever possible
  include: convert various register fcns to macros to avoid include chaining
  crypto.h: remove unused crypto_tfm_alg_modname() inline
  uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
  pm_runtime.h: explicitly requires notifier.h
  linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
  miscdevice.h: fix up implicit use of lists and types
  stop_machine.h: fix implicit use of smp.h for smp_processor_id
  of: fix implicit use of errno.h in include/linux/of.h
  of_platform.h: delete needless include <linux/module.h>
  acpi: remove module.h include from platform/aclinux.h
  miscdevice.h: delete unnecessary inclusion of module.h
  device_cgroup.h: delete needless include <linux/module.h>
  net: sch_generic remove redundant use of <linux/module.h>
  net: inet_timewait_sock doesnt need <linux/module.h>
  ...

Fix up trivial conflicts (other header files, and  removal of the ab3550 mfd driver) in
 - drivers/media/dvb/frontends/dibx000_common.c
 - drivers/media/video/{mt9m111.c,ov6650.c}
 - drivers/mfd/ab3550-core.c
 - include/linux/dmaengine.h
2011-11-06 19:44:47 -08:00
Linus Torvalds
b4fdcb02f1 Merge branch 'for-3.2/core' of git://git.kernel.dk/linux-block
* 'for-3.2/core' of git://git.kernel.dk/linux-block: (29 commits)
  block: don't call blk_drain_queue() if elevator is not up
  blk-throttle: use queue_is_locked() instead of lockdep_is_held()
  blk-throttle: Take blkcg->lock while traversing blkcg->policy_list
  blk-throttle: Free up policy node associated with deleted rule
  block: warn if tag is greater than real_max_depth.
  block: make gendisk hold a reference to its queue
  blk-flush: move the queue kick into
  blk-flush: fix invalid BUG_ON in blk_insert_flush
  block: Remove the control of complete cpu from bio.
  block: fix a typo in the blk-cgroup.h file
  block: initialize the bounce pool if high memory may be added later
  block: fix request_queue lifetime handling by making blk_queue_cleanup() properly shutdown
  block: drop @tsk from attempt_plug_merge() and explain sync rules
  block: make get_request[_wait]() fail if queue is dead
  block: reorganize throtl_get_tg() and blk_throtl_bio()
  block: reorganize queue draining
  block: drop unnecessary blk_get/put_queue() in scsi_cmd_ioctl() and blk_get_tg()
  block: pass around REQ_* flags instead of broken down booleans during request alloc/free
  block: move blk_throtl prototypes to block/blk.h
  block: fix genhd refcounting in blkio_policy_parse_and_set()
  ...

Fix up trivial conflicts due to "mddev_t" -> "struct mddev" conversion
and making the request functions be of type "void" instead of "int" in
 - drivers/md/{faulty.c,linear.c,md.c,md.h,multipath.c,raid0.c,raid1.c,raid10.c,raid5.c}
 - drivers/staging/zram/zram_drv.c
2011-11-04 17:06:58 -07:00
Paul Gortmaker
056075c764 md: Add module.h to all files using it implicitly
A pending cleanup will mean that module.h won't be implicitly
everywhere anymore.  Make sure the modular drivers in md dir
are actually calling out for <module.h> explicitly in advance.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:18 -04:00
NeilBrown
7fcc7c8acf md/raid10: Fix bug when activating a hot-spare.
This is a fairly serious bug in RAID10.

When a RAID10 array is degraded and a hot-spare is activated, the
spare does not take up the empty slot, but rather replaces the first
working device.
This is likely to make the array non-functional.   It would normally
be possible to recover the data, but that would need care and is not
guaranteed.

This bug was introduced in commit
   2bb77736ae
which first appeared in 3.1.

Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-31 12:59:44 +11:00
NeilBrown
d890fa2b05 md: Fix some bugs in recovery_disabled handling.
In 3.0 we changed the way recovery_disabled was handle so that instead
of testing against zero, we test an mddev-> value against a conf->
value.
Two problems:
  1/ one place in raid1 was missed and still sets to '1'.
  2/ We didn't explicitly set the conf-> value at array creation
     time.
     It defaulted to '0' just like the mddev value does so they
     could appear equal and thus disable recovery.
     This did not affect normal 'md' as it calls bind_rdev_to_array
     which changes the mddev value.  However the dmraid interface
     doesn't call this and so doesn't change ->recovery_disabled; so at
     array start all recovery is incorrectly disabled.

So initialise the 'conf' value to one less that the mddev value, so
the will only be the same when explicitly set that way.

Reported-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown  <neilb@suse.de>
2011-10-26 11:54:39 +11:00
Jens Axboe
5c04b426f2 Merge branch 'v3.1-rc10' into for-3.2/core
Conflicts:
	block/blk-core.c
	include/linux/blkdev.h

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-19 14:30:42 +02:00
NeilBrown
34db0cd60f md: add proper write-congestion reporting to RAID1 and RAID10.
RAID1 and RAID10 handle write requests by queuing them for handling by
a separate thread.  This is because when a write-intent-bitmap is
active we might need to update the bitmap first, so it is good to
queue a lot of writes, then do one big bitmap update for them all.

However writeback request devices to appear to be congested after a
while so it can make some guesstimate of throughput.  The infinite
queue defeats that (note that RAID5 has already has a finite queue so
it doesn't suffer from this problem).

So impose a limit on the number of pending write requests.  By default
it is 1024 which seems to be generally suitable.  Make it configurable
via module option just in case someone finds a regression.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:50:01 +11:00
NeilBrown
84fc4b56db md: rename "mdk_personality" to "md_personality"
"mdk" doesn't mean anything any more.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:58 +11:00
NeilBrown
e879a8793f md/raid10: typedef removal: conf_t -> struct r10conf
Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
NeilBrown
e373ab1091 md/raid0: typedef removal: raid0_conf_t -> struct r0conf
Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:48:59 +11:00
NeilBrown
0f6d02d580 md: remove typedefs: mirror_info_t -> struct mirror_info
Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:48:46 +11:00
NeilBrown
9f2c9d12bc md: remove typedefs: r10bio_t -> struct r10bio and r1bio_t -> struct r1bio
Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:48:43 +11:00
NeilBrown
fd01b88c75 md: remove typedefs: mddev_t -> struct mddev
Having mddev_t and 'struct mddev_s' is ugly and not preferred

Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:47:53 +11:00
NeilBrown
3cb0300200 md: removing typedefs: mdk_rdev_t -> struct md_rdev
The typedefs are just annoying. 'mdk' probably refers to 'md_k.h'
which used to be an include file that defined this thing.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:45:26 +11:00
NeilBrown
01f96c0a99 md: Avoid waking up a thread after it has been freed.
Two related problems:

1/ some error paths call "md_unregister_thread(mddev->thread)"
   without subsequently clearing ->thread.  A subsequent call
   to mddev_unlock will try to wake the thread, and crash.

2/ Most calls to md_wakeup_thread are protected against the thread
   disappeared either by:
      - holding the ->mutex
      - having an active request, so something else must be keeping
        the array active.
   However mddev_unlock calls md_wakeup_thread after dropping the
   mutex and without any certainty of an active request, so the
   ->thread could theoretically disappear.
   So we need a spinlock to provide some protections.

So change md_unregister_thread to take a pointer to the thread
pointer, and ensure that it always does the required locking, and
clears the pointer properly.

Reported-by: "Moshe Melnikov" <moshe@zadarastorage.com>
Signed-off-by: NeilBrown <neilb@suse.de>
cc: stable@kernel.org
2011-09-21 15:30:20 +10:00
Christoph Hellwig
5a7bbad27a block: remove support for bio remapping from ->make_request
There is very little benefit in allowing to let a ->make_request
instance update the bios device and sector and loop around it in
__generic_make_request when we can archive the same through calling
generic_make_request from the driver and letting the loop in
generic_make_request handle it.

Note that various drivers got the return value from ->make_request and
returned non-zero values for errors.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-09-12 12:12:01 +02:00
NeilBrown
079fa166a2 md/raid1,10: Remove use-after-free bug in make_request.
A single request to RAID1 or RAID10 might result in multiple
requests if there are known bad blocks that need to be avoided.

To detect if we need to submit another write request we test:
 	if (sectors_handled < (bio->bi_size >> 9)) {

However this is after we call **_write_done() so the 'bio' no longer
belongs to us - the writes could have completed and the bio freed.

So move the **_write_done call until after the test against
bio->bi_size.

This addresses https://bugzilla.kernel.org/show_bug.cgi?id=41862

Reported-by: Bruno Wolff III <bruno@wolff.to>
Tested-by: Bruno Wolff III <bruno@wolff.to>
Signed-off-by: NeilBrown <neilb@suse.de>
2011-09-10 17:21:23 +10:00
NeilBrown
19d5f834d6 md/raid10: unify handling of write completion.
A write can complete at two different places:
1/ when the last member-device write completes, through
   raid10_end_write_request
2/ in make_request() when we remove the initial bias from ->remaining.

These two should do exactly the same thing and the comment says they
do, but they don't.

So factor the correct code out into a function and call it in both
places.  This makes the code much more similar to RAID1.

The difference is only significant if there is an error, and they
usually take a while, so it is unlikely that there will be an error
already when make_request is completing, so this is unlikely to cause
real problems.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-09-10 17:21:17 +10:00
NeilBrown
58c54fcca3 md/raid10: handle further errors during fix_read_error better.
If we find more read/write errors we should record a bad block before
failing the device.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:25 +10:00
NeilBrown
5e5702898e md/raid10: Handle read errors during recovery better.
Currently when we get a read error during recovery, we simply abort
the recovery.

Instead, repeat the read in page-sized blocks.
On successful reads, write to the target.
On read errors, record a bad block on the destination,
and only if that fails do we abort the recovery.

As we now retry reads we need to know where we read from.  This was in
bi_sector but that can be changed during a read attempt.
So store the correct from_addr and to_addr in the r10_bio for later
access.


Signed-off-by: NeilBrown<neilb@suse.de>
2011-07-28 11:39:25 +10:00
NeilBrown
e684e41db3 md/raid10: simplify read error handling during recovery.
If a read error is detected during recovery the code currently
fails the read device.
This isn't really necessary.  recovery_request_write will signal
a write error to end_sync_write and it will record a write
error on the destination device which will record a bad block
there or kick it from the array.

So just remove this call to do md_error.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:25 +10:00
NeilBrown
1a0b7cd826 md/raid10: record bad blocks due to write errors during resync/recovery.
If we get a write error during resync/recovery don't fail the device
but instead record a bad block.  If that fails we can then fail the
device.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:25 +10:00
NeilBrown
f84ee364dd md/raid10: attempt to fix read errors during resync/check
We already attempt to fix read errors found during normal IO
and a 'repair' process.
It is best to try to repair them at any time they are found,
so move a test so that during sync and check a read error will
be corrected by over-writing with good data.

If both (all) devices have known bad blocks in the sync section we
won't try to fix even though the bad blocks might not overlap.  That
should be considered later.

Also if we hit a read error during recovery we don't try to fix it.
It would only be possible to fix if there were at least three copies
of data, which is not very common with RAID10.  But it should still
be considered later.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:25 +10:00
NeilBrown
bd870a16c5 md/raid10: Handle write errors by updating badblock log.
When we get a write error (in the data area, not in metadata),
update the badblock log rather than failing the whole device.

As the write may well be many blocks, we trying writing each
block individually and only log the ones which fail.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
NeilBrown
749c55e942 md/raid10: clear bad-block record when write succeeds.
If we succeed in writing to a block that was recorded as
being bad, we clear the bad-block record.

This requires some delayed handling as the bad-block-list update has
to happen in process-context.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
NeilBrown
d4432c23be md/raid10: avoid writing to known bad blocks on known bad drives.
Writing to known bad blocks on drives that have seen a write error
is asking for trouble.  So try to avoid these blocks.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
NeilBrown
e875ecea26 md/raid10 record bad blocks as needed during recovery.
When recovering one or more devices, if all the good devices have
bad blocks we should record a bad block on the device being rebuilt.

If this fails, we need to abort the recovery.

To ensure we don't think that we aborted later than we actually did,
we need to move the check for MD_RECOVERY_INTR earlier in md_do_sync,
in particular before mddev->curr_resync is updated.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
NeilBrown
40c356ce5a md/raid10: avoid reading known bad blocks during resync/recovery.
During resync/recovery limit the size of the request to avoid
reading into a bad block that does not start at-or-before the current
read address.

Similarly if there is a bad block at this address, don't allow the
current request to extend beyond the end of that bad block.

Now that we don't ever read from known bad blocks, it is safe to allow
devices with those blocks into the array.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
NeilBrown
8dbed5cebd md/raid10 - avoid reading from known bad blocks - part 3
When attempting to repair a read error, don't read from
devices with a known bad block.

As we are only reading PAGE_SIZE blocks, we don't try to
narrow down to smaller regions in the hope that only part of this
page is bad - it isn't worth the effort.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:24 +10:00
NeilBrown
7399c31bc9 md/raid10: avoid reading from known bad blocks - part 2
When redirecting a read error to a different device, we must
again avoid bad blocks and possibly split the request.

Spin_lock typo fixed thanks to Dan Carpenter <error27@gmail.com>

Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:23 +10:00
NeilBrown
856e08e237 md/raid10: avoid reading from known bad blocks - part 1
This patch just covers the basic read path:
 1/ read_balance needs to check for badblocks, and return not only
    the chosen slot, but also how many good blocks are available
    there.
 2/ read submission must be ready to issue multiple reads to
    different devices as different bad blocks on different devices
    could mean that a single large read cannot be served by any one
    device, but can still be served by the array.
    This requires keeping count of the number of outstanding requests
    per bio.  This count is stored in 'bi_phys_segments'

On read error we currently just fail the request if another target
cannot handle the whole request.  Next patch refines that a bit.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:39:23 +10:00