Commit graph

120 commits

Author SHA1 Message Date
Jeff Garzik
c3c013a2c2 [libata] Disable FUA
Until problems are sorted.
2006-02-27 22:31:19 -05:00
Tejun Heo
2e242fa994 [PATCH] libata: make ata_sg_setup_one() trim zero length sg
This patch makes ata_sg_setup_one() trim sg entry (thus making
qc->n_elem zero) if padding results in zero length sg entry.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-20 16:48:18 -05:00
Tejun Heo
9ae61c6cb6 [PATCH] libata: fix WARN_ON() condition in *_fill_sg()
For ATAPI commands, padding can reduce qc->n_elem by one and thus to
zero making assert(qc->n_elem > 0)'s in ata_fill_sg() and qs_fill_sg()
fail for legal commands.  This patch fixes the assert()'s to take
qc->pad_len into account.

Although the condition check seems a bit excessive, as this part of
code isn't still stable yet, I think it's worth to keep those.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-20 16:48:17 -05:00
Albert Lee
0565c26de7 [PATCH] libata: minor fix for 2.6.16-rc3
- Fix the array index value in ata_rwcmd_protocol() for the added FUA commands.
 - Filter out ATAPI packet command error messages in ata_pio_error()

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-17 16:29:07 -05:00
Alan Cox
a1bd9e6857 [PATCH] libata: Code for the IRQ mask flag
Signed-off-by: Alan Cox <alan@redhat.com>

Somewhat cleaner in the resync as someone cleaned up the pio xfer users
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-17 19:37:45 -05:00
Alan Cox
9d824d0710 [PATCH] libata: Fix sector lock to apply to both drives not drive 0 twice
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-17 19:37:45 -05:00
Alan Cox
8d238e0124 [PATCH] libata: Fix heuristic typos add LBA48PIO flag and support code, add IRQ flag for next diff
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-17 19:37:45 -05:00
Alan Cox
1bc4ccfff8 [PATCH] libata: add a function to decide if we need iordy
This ought to be simple but for PIO2 we have to poke around the drive
data to get it 100% correct.

Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-17 08:25:39 -05:00
Alan Cox
ffa29456cd [PATCH] libata: Pre UDMA EIDE PIO mode selection
I misread the spec when doing the original. I've tested the corrected
version with pre UDMA drives and it now picks the right modes. This is a
specific bug fix rather than an update or new feature item.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-17 08:25:39 -05:00
Arjan van de Ven
858119e159 [PATCH] Unlinline a bunch of other functions
Remove the "inline" keyword from a bunch of big functions in the kernel with
the goal of shrinking it by 30kb to 40kb

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14 18:27:06 -08:00
Linus Torvalds
d99cf9d679 Merge branch 'post-2.6.15' of git://brick.kernel.dk/data/git/linux-2.6-block
Manual fixup for merge with Jens' "Suspend support for libata", commit
ID 9b84754866.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 09:01:25 -08:00
Jens Axboe
9b84754866 [PATCH] Suspend support for libata
This patch adds suspend patch to libata, and ata_piix in particular. For
most low level drivers, they should just need to add the 4 hooks to
work. As I can only test ata_piix, I didn't enable it for more
though.

Suspend support is the single most important feature on a notebook, and
most new notebooks have sata drives. It's quite embarrassing that we
_still_ do not support this. Right now, it's perfectly possible to
suspend the drive in mid-transfer.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:36:09 -08:00
Tejun Heo
9a3dccc425 [BLOCK] add FUA support to libata
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-06 09:56:18 +01:00
Tejun Heo
b563230340 [PATCH] libata: remove unused qc->waiting
There is no user of qc->waiting left after ata_exec_internal()
changes.  Kill the field.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-13 01:34:46 -05:00
Tejun Heo
82033adf0a [PATCH] libata: remove unused functions
There is no user of ata_qc_wait_err() and ata_qc_complete_noop() after
ata_exec_internal() changes.  Remove unused functions.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-13 01:34:45 -05:00
Tejun Heo
a012370322 [PATCH] libata: use ata_exec_internal()
This patch converts all users of libata internal commands to use
ata_exec_internal().

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-13 01:34:45 -05:00
Tejun Heo
a2a7a662f8 [PATCH] libata: implement ata_exec_internal()
This patch implements ata_exec_internal() function which performs
libata internal command execution.  Previously, this was done by each
user by manually initializing a qc, issueing it, waiting for its
completion and handling errors.  In addition to obvious code
factoring, using ata_exec_internal() fixes the following bugs.

* qc not freed on issue failure
* ap->qactive clearing could race with the next internal command
* race between timeout handling and irq
* ignoring error condition not represented in tf->status

Also, qc & hardware are not accessed anymore once it's completed,
making internal commands more conformant with general semantics.
ata_exec_internal() also makes it easy to issue internal commands from
multiple threads if that becomes necessary.

This patch only implements ata_exec_internal().  A following patch
will convert all users.

Signed-off-by: Tejun Heo <htejun@gmail.com>

--

Jeff, all patches have been regenerated against upstream branch as of
today.  (575ab52a21)

Also, I took out a debug printk from ata_exec_internal (don't know how
that one got left there).  Other than that, all patches are identical
to the previous posting.

Thanks. :-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-13 01:34:45 -05:00
Jeff Garzik
575ab52a21 Merge branch 'upstream-fixes' 2005-12-12 23:51:01 -05:00
Mark Lord
dfa159886f [PATCH] libata-core.c: fix parameter bug on kunmap_atomic() calls
Fix incorrect pointer usage on two calls to kunmap_atomic().
This seems to happen a lot, because kunmap() wants the struct page *,
whereas kunmap_atomic() instead wants the mapped virtual address.

Signed-off-by: Mark Lord <liml@rtr.ca>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 23:19:28 -05:00
Albert Lee
fe79e683cc [PATCH] libata: err_mask misc fix
1. ata_pio_complete():
     It seems unnecessary to wait for the clearing of the DRQ bit.
     (Waiting for BSY=0 should be enough.
     ata_ok() also checks the correctness of the status bits later.)

  2. ata_pio_block():
     - added error checking, before transfering data.
     - minor comments fix

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>

============
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-06 04:49:23 -05:00
Albert Lee
d8fe452b3e [PATCH] libata: determine the err_mask directly in atapi_packet_task()
- set qc->err_mask directly when we found the error
  - remove the code to determine err_mask from device status

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>

============
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-06 04:49:23 -05:00
Albert Lee
1c8489840e [PATCH] libata: determine the err_mask when the error is found
- move "qc->err_mask |= AC_ERR_ATA_BUS" to where the error is found
  - add "assert(qc->err_mask)" to ata_pio_error() to make sure qc->err_mask was available when we enter the error state

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>

============
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-06 04:49:23 -05:00
Albert Lee
a22e2eb071 [PATCH] libata: move err_mask to ata_queued_cmd
- remove err_mask from the parameter list of the complete functions
  - move err_mask to ata_queued_cmd
  - initialize qc->err_mask when needed
  - for each function call to ata_qc_complete(), replace the err_mask parameter with qc->err_mask.

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>

===============
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-06 04:49:22 -05:00
Albert Lee
c14b8331ec [PATCH] libata: minor patch before moving err_mask
- add qc to ata_pio_poll()
  - reorder the initialization of qc in ata_pio_complete()

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>

===================
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-06 04:49:22 -05:00
Arjan van de Ven
98ac62defe [PATCH] mark several libata datastructures const
Hi,

the patch below marks several libata (and libata-driver) structures
const so that they end up in the .rodata segment and don't false-share
cachelines with things that get dirtied often.

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:29:35 -05:00
Jeff Garzik
656563e32c [libata] Print out SATA speed, if link is up
Make the SATA phy probe messages a bit more informative.

Note this only applies to drivers that use __sata_phy_reset(),
which excludes some drivers.
2005-11-20 03:36:45 -05:00
Jeff Garzik
64f043d807 [libata] add timeout to commands for which we call wait_completion() 2005-11-17 10:50:01 -05:00
Albert Lee
75b1f2f865 [PATCH] libata: honor the transfer cycle time speficied by the EIDE device
The following code segment is not functional because the transfer cycle time speficied by
  the EIDE device is later overwritten by ata_timing_quantize():

	/*
	 * If the drive is an EIDE drive, it can tell us it needs extended
	 * PIO/MW_DMA cycle timing.
	 */
	if (adev->id[ATA_ID_FIELD_VALID] & 2) {	/* EIDE drive */
		memset(&p, 0, sizeof(p));
		(snip)
		ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B);
               <== uninitialized "t" is used here
	}

	/*
	 * Convert the timing to bus clock counts.
	 */
	ata_timing_quantize(s, t, T, UT);  <== t is overwritten by quantized s

  The patch has been submitted for ide-timing.h before:
  http://marc.theaimsgroup.com/?l=linux-ide&m=110820013425454&w=2
  Resubmitted for libata.

Changes:
  - Minor fix to honor the following transfer cycle time speficied by the device
    - id[65]: Minimum Multiword DMA transfer cycle time per word
    - id[67]: Minimum PIO transfer cycle time without flow control
    - id[68]: Minimum PIO transfer cycle time with IORDY

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>

=======
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-16 07:59:22 -05:00
Jeff Garzik
c6e6e666cb [libata] REQUEST SENSE handling fixes
- Move ATAPI check-condition handling out of the timeout handler
- Use multi-qc-issue feature to issue REQUEST SENSE ATAPI PACKET
  command upon receiving an ATAPI check-condition.

This cleans things up a lot, and eliminates a nasty recursion bug.
2005-11-14 14:50:05 -05:00
Jeff Garzik
2c13b7cee0 [libata] minor fixes, new helpers
- in ata_dev_identify(), don't assume that all devices are either
  ATA or ATAPI.  In the future, this code will see port multipliers
  and other devices.
- make a debugging printk less verbose
- add new helper ata_qc_reinit()
- add new helper BPRINTK() and port flag ATA_FLAG_DEBUGMSG, for
  fine-grained debugging use.
2005-11-14 14:14:16 -05:00
Jeff Garzik
e1410f2d95 [libata] fix bugs in ATAPI padding DMA mapping code
The ATAPI pad-to-next-32bit-boundary code modifies the scatterlist's
length variable, sometimes to zero.  x86-64 platform would oops if a
zero-length scatterlist entry was asked to be mapped.  Work around this
by ensuring that we never DMA-map a zero length buffer or SG entry.
2005-11-14 14:06:26 -05:00
Mark Lord
e12a1be6e8 [PATCH] libata: fix comments on ata_tf_from_fis()
Fix description on comments for ata_tf_from_fis().

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-13 16:19:26 -05:00
Alan Cox
e99f8b5efe [PATCH] libata: propogate host private data from probe function
This will let me chop the code size of several drivers right down. In
many cases the actual private data is very useful and constant for a
given host controller so being able to just pass it at probe time would
be very useful indeed (eg with the via driver would could pass the udma
clocking and reduce the code size, or with the AMD one the UDMA
multiplier and the offset)

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11 08:19:55 -05:00
Albert Lee
7c3983357f [PATCH] libata: if condition fix for ata_dev_identify()
- if condition fix for ata_dev_identify()
  - ata_pio_poll() minor cleanup.

Changes:
   - Use (dev->class == ATA_DEV_ATA) for ata_dev_identify()
     since "qc->tf.command" has been overwritten by the device status
   - Use HSM_ST_TMOUT directly in ata_pio_poll()

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>

============
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-09 01:23:22 -05:00
Randy Dunlap
8e8b77dd48 [PATCH] libata kernel-doc fixes
Fix all reported kernel-doc errors in libata.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-09 01:10:55 -05:00
Jeff Garzik
193515d51c [libata] eliminate use of drivers/scsi/scsi.h compatibility header/defines 2005-11-07 00:59:37 -05:00
Tejun Heo
537a95d935 [libata] restore sg on DMA mapping failure 2005-11-05 14:29:01 -05:00
Jeff Garzik
6037d6bbdf [libata] ATAPI pad allocation fixes/cleanup
Use ata_pad_{alloc,free} in two drivers, to factor out common code.

Add ata_pad_{alloc,free} to two other drivers, which needed the padding
but had not been updated.
2005-11-04 22:08:00 -05:00
Jeff Garzik
ce1eeb95fc Merge branch 'upstream' 2005-10-30 23:32:03 -05:00
Jeff Garzik
005a5a06a6 [libata] locking rewrite (== fix)
A lot of power packed into a little patch.

This change eliminates the sharing between our controller-wide spinlock
and the SCSI core's Scsi_Host lock.  As the locking in libata was
already highly compartmentalized, always referencing our own lock, and
never scsi_host::host_lock.

As a side effect, this change eliminates a deadlock from calling
scsi_finish_command() while inside our spinlock.
2005-10-30 23:31:48 -05:00
Jeff Garzik
e533825447 [libata] ata_tf_to_host cleanups
Integrate ata_exec() and ata_tf_to_host() into their only caller,
ata_bus_edd().

Rename ata_tf_to_host_nolock() to ata_tf_to_host().

This makes locking a bit easier to review, and may help pave the way for
future changes.
2005-10-30 21:37:17 -05:00
Jeff Garzik
95dbf5c4be Merge branch 'master' 2005-10-30 20:24:34 -05:00
Jeff Garzik
0f0d519269 [libata] fix legacy IDE probing
ata_pci_init_one() receives an array of struct ata_port_info.  Recent
updates to the code had always obtained port information from
array element 0, rather than array element N.

Change to avoid hardcoding port_info[0], thereby restoring proper
hardware information to secondary legacy ports.
2005-10-30 06:41:29 -05:00
Jeff Garzik
054ee8fd39 Merge branch 'upstream' 2005-10-30 04:50:22 -05:00
Jeff Garzik
a7dac447bb [libata] change ata_qc_complete() to take error mask as second arg
The second argument to ata_qc_complete() was being used for two
purposes: communicate the ATA Status register to the completion
function, and indicate an error.  On legacy PCI IDE hardware, the latter
is often implicit in the former.  On more modern hardware, the driver
often completely emulated a Status register value, passing ATA_ERR as an
indication that something went wrong.

Now that previous code changes have eliminated the need to use drv_stat
arg to communicate the ATA Status register value, we can convert it to a
mask of possible error classes.

This will lead to more flexible error handling in the future.
2005-10-30 04:44:42 -05:00
Jeff Garzik
f0612bbc41 Merge branch 'upstream' 2005-10-30 01:58:18 -05:00
Jeff Garzik
81cfb8864c Merge branch 'master' 2005-10-30 01:56:31 -05:00
Jeff Garzik
0169e284f6 [libata] remove ata_chk_err(), ->check_err() hook.
We now depend on ->tf_read() to provide us with the contents
of the Error shadow register.
2005-10-29 21:25:10 -04:00
David Hardeman
378f058cc4 [PATCH] Use sg_set_buf/sg_init_one where applicable
This patch uses sg_set_buf/sg_init_one in some places where it was
duplicated.

Signed-off-by: David Hardeman <david@2gen.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Greg KH <greg@kroah.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2005-10-30 11:19:43 +11:00
Jeff Garzik
b0c4e148bd Merge branch 'master' 2005-10-29 17:49:12 -04:00