* 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (476 commits)
vmwgfx: Implement a proper GMR eviction mechanism
drm/radeon/kms: fix r6xx/7xx 1D tiling CS checker v2
drm/radeon/kms: properly compute group_size on 6xx/7xx
drm/radeon/kms: fix 2D tile height alignment in the r600 CS checker
drm/radeon/kms/evergreen: set the clear state to the blit state
drm/radeon/kms: don't poll dac load detect.
gpu: Add Intel GMA500(Poulsbo) Stub Driver
drm/radeon/kms: MC vram map needs to be >= pci aperture size
drm/radeon/kms: implement display watermark support for evergreen
drm/radeon/kms/evergreen: add some additional safe regs v2
drm/radeon/r600: fix tiling issues in CS checker.
drm/i915: Move gpu_write_list to per-ring
drm/i915: Invalidate the to-ring, flush the old-ring when updating domains
drm/i915/ringbuffer: Write the value passed in to the tail register
agp/intel: Restore valid PTE bit for Sandybridge after bdd3072
drm/i915: Fix flushing regression from 9af90d19f
drm/i915/sdvo: Remove unused encoding member
i915: enable AVI infoframe for intel_hdmi.c [v4]
drm/i915: Fix current fb blocking for page flip
drm/i915: IS_IRONLAKE is synonymous with gen == 5
...
Fix up conflicts in
- drivers/gpu/drm/i915/{i915_gem.c, i915/intel_overlay.c}: due to the
new simplified stack-based kmap_atomic() interface
- drivers/gpu/drm/vmwgfx/vmwgfx_drv.c: added .llseek entry due to BKL
removal cleanups.
* 'upstream/xenfs' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
xen/privcmd: make privcmd visible in domU
xen/privcmd: move remap_domain_mfn_range() to core xen code and export.
privcmd: MMAPBATCH: Fix error handling/reporting
xenbus: export xen_store_interface for xenfs
xen/privcmd: make sure vma is ours before doing anything to it
xen/privcmd: print SIGBUS faults
xen/xenfs: set_page_dirty is supposed to return true if it dirties
xen/privcmd: create address space to allow writable mmaps
xen: add privcmd driver
xen: add variable hypercall caller
xen: add xen_set_domain_pte()
xen: add /proc/xen/xsd_{kva,port} to xenfs
* 'upstream/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: (29 commits)
xen: include xen/xen.h for definition of xen_initial_domain()
xen: use host E820 map for dom0
xen: correctly rebuild mfn list list after migration.
xen: improvements to VIRQ_DEBUG output
xen: set up IRQ before binding virq to evtchn
xen: ensure that all event channels start off bound to VCPU 0
xen/hvc: only notify if we actually sent something
xen: don't add extra_pages for RAM after mem_end
xen: add support for PAT
xen: make sure xen_max_p2m_pfn is up to date
xen: limit extra memory to a certain ratio of base
xen: add extra pages for E820 RAM regions, even if beyond mem_end
xen: make sure xen_extra_mem_start is beyond all non-RAM e820
xen: implement "extra" memory to reserve space for pages not present at boot
xen: Use host-provided E820 map
xen: don't map missing memory
xen: defer building p2m mfn structures until kernel is mapped
xen: add return value to set_phys_to_machine()
xen: convert p2m to a 3 level tree
xen: make install_p2mtop_page() static
...
Fix up trivial conflict in arch/x86/xen/mmu.c, and fix the use of
'reserve_early()' - in the new memblock world order it is now
'memblock_x86_reserve_range()' instead. Pointed out by Jeremy.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (52 commits)
split invalidate_inodes()
fs: skip I_FREEING inodes in writeback_sb_inodes
fs: fold invalidate_list into invalidate_inodes
fs: do not drop inode_lock in dispose_list
fs: inode split IO and LRU lists
fs: switch bdev inode bdi's correctly
fs: fix buffer invalidation in invalidate_list
fsnotify: use dget_parent
smbfs: use dget_parent
exportfs: use dget_parent
fs: use RCU read side protection in d_validate
fs: clean up dentry lru modification
fs: split __shrink_dcache_sb
fs: improve DCACHE_REFERENCED usage
fs: use percpu counter for nr_dentry and nr_dentry_unused
fs: simplify __d_free
fs: take dcache_lock inside __d_path
fs: do not assign default i_ino in new_inode
fs: introduce a per-cpu last_ino allocator
new helper: ihold()
...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (63 commits)
IB/qib: clean up properly if pci_set_consistent_dma_mask() fails
IB/qib: Allow driver to load if PCIe AER fails
IB/qib: Fix uninitialized pointer if CONFIG_PCI_MSI not set
IB/qib: Fix extra log level in qib_early_err()
RDMA/cxgb4: Remove unnecessary KERN_<level> use
RDMA/cxgb3: Remove unnecessary KERN_<level> use
IB/core: Add link layer type information to sysfs
IB/mlx4: Add VLAN support for IBoE
IB/core: Add VLAN support for IBoE
IB/mlx4: Add support for IBoE
mlx4_en: Change multicast promiscuous mode to support IBoE
mlx4_core: Update data structures and constants for IBoE
mlx4_core: Allow protocol drivers to find corresponding interfaces
IB/uverbs: Return link layer type to userspace for query port operation
IB/srp: Sync buffer before posting send
IB/srp: Use list_first_entry()
IB/srp: Reduce number of BUSY conditions
IB/srp: Eliminate two forward declarations
IB/mlx4: Signal node desc changes to SM by using FW to generate trap 144
IB: Replace EXTRA_CFLAGS with ccflags-y
...
Add more wait, wake, and completion interfaces to the device-drivers
docbook.
Fix kernel-doc notation in the added files.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (53 commits)
ACPI: install ACPI table handler before any dynamic tables being loaded
ACPI / PM: Blacklist another machine that needs acpi_sleep=nonvs
ACPI: Page based coalescing of I/O remappings optimization
ACPI: Convert simple locking to RCU based locking
ACPI: Pre-map 'system event' related register blocks
ACPI: Add interfaces for ioremapping/iounmapping ACPI registers
ACPI: Maintain a list of ACPI memory mapped I/O remappings
ACPI: Fix ioremap size for MMIO reads and writes
ACPI / Battery: Return -ENODEV for unknown values in get_property()
ACPI / PM: Fix reference counting of power resources
Subject: [PATCH] ACPICA: Fix Scope() op in module level code
ACPI battery: support percentage battery remaining capacity
ACPI: Make Embedded Controller command timeout delay configurable
ACPI dock: move some functions to .init.text
ACPI: thermal: remove unused limit code
ACPI: static sleep_states[] and acpi_gts_bfs_check
ACPI: remove dead code
ACPI: delete dedicated MAINTAINERS entries for ACPI EC and BATTERY drivers
ACPI: Only processor needs CPU_IDLE
ACPICA: Update version to 20101013
...
* akpm-incoming-1: (176 commits)
scripts/checkpatch.pl: add check for declaration of pci_device_id
scripts/checkpatch.pl: add warnings for static char that could be static const char
checkpatch: version 0.31
checkpatch: statement/block context analyser should look at sanitised lines
checkpatch: handle EXPORT_SYMBOL for DEVICE_ATTR and similar
checkpatch: clean up structure definition macro handline
checkpatch: update copyright dates
checkpatch: Add additional attribute #defines
checkpatch: check for incorrect permissions
checkpatch: ensure kconfig help checks only apply when we are adding help
checkpatch: simplify and consolidate "missing space after" checks
checkpatch: add check for space after struct, union, and enum
checkpatch: returning errno typically should be negative
checkpatch: handle casts better fixing false categorisation of : as binary
checkpatch: ensure we do not collapse bracketed sections into constants
checkpatch: suggest cleanpatch and cleanfile when appropriate
checkpatch: types may sit on a line on their own
checkpatch: fix regressions in "fix handling of leading spaces"
div64_u64(): improve precision on 32bit platforms
lib/parser: cleanup match_number()
...
The current implementation of div64_u64 for 32bit systems returns an
approximately correct result when the divisor exceeds 32bits. Since doing
64bit division using 32bit hardware is a long since solved problem we just
use one of the existing proven methods.
Additionally, add a div64_s64 function to correctly handle doing signed
64bit division.
Addresses https://bugzilla.redhat.com/show_bug.cgi?id=616105
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Ben Woodard <bwoodard@llnl.gov>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Mark Grondona <mgrondona@llnl.gov>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
printk_ratelimit() was a bad idea - we don't want subsytem A causing
ratelimiting of subsystem B's messages.
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adding declaration of printk_ratelimit_state in ratelimit.h removes
potential build breakage and following sparse warning:
kernel/printk.c:1426:1: warning: symbol 'printk_ratelimit_state' was not declared. Should it be static?
[akpm@linux-foundation.org: remove unneeded ifdef]
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
PF_FLUSHER is only ever set, not tested, remove it.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Robin Holt tried to boot a 16TB system and found af_unix was overflowing
a 32bit value :
<quote>
We were seeing a failure which prevented boot. The kernel was incapable
of creating either a named pipe or unix domain socket. This comes down
to a common kernel function called unix_create1() which does:
atomic_inc(&unix_nr_socks);
if (atomic_read(&unix_nr_socks) > 2 * get_max_files())
goto out;
The function get_max_files() is a simple return of files_stat.max_files.
files_stat.max_files is a signed integer and is computed in
fs/file_table.c's files_init().
n = (mempages * (PAGE_SIZE / 1024)) / 10;
files_stat.max_files = n;
In our case, mempages (total_ram_pages) is approx 3,758,096,384
(0xe0000000). That leaves max_files at approximately 1,503,238,553.
This causes 2 * get_max_files() to integer overflow.
</quote>
Fix is to let /proc/sys/fs/file-nr & /proc/sys/fs/file-max use long
integers, and change af_unix to use an atomic_long_t instead of atomic_t.
get_max_files() is changed to return an unsigned long. get_nr_files() is
changed to return a long.
unix_nr_socks is changed from atomic_t to atomic_long_t, while not
strictly needed to address Robin problem.
Before patch (on a 64bit kernel) :
# echo 2147483648 >/proc/sys/fs/file-max
# cat /proc/sys/fs/file-max
-18446744071562067968
After patch:
# echo 2147483648 >/proc/sys/fs/file-max
# cat /proc/sys/fs/file-max
2147483648
# cat /proc/sys/fs/file-nr
704 0 2147483648
Reported-by: Robin Holt <holt@sgi.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: David Miller <davem@davemloft.net>
Reviewed-by: Robin Holt <holt@sgi.com>
Tested-by: Robin Holt <holt@sgi.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a driver for Avago APDS990X combined ALS and proximity sensor.
Interface is sysfs based. The driver uses interrupts to provide new data.
The driver supports pm_runtime and regulator frameworks.
See Documentation/misc-devices/apds990x.txt for details
Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a driver for ROHM BH1770GLC and OSRAM SFH7770 combined ALS and
proximity sensor.
Interface is sysfs based. The driver uses interrupts to provide new data.
The driver supports pm_runtime and regulator frameworks.
See Documentation/misc-devices/bh1770glc.txt for details
Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Silly though it is, completions and wait_queue_heads use foo_ONSTACK
(COMPLETION_INITIALIZER_ONSTACK, DECLARE_COMPLETION_ONSTACK,
__WAIT_QUEUE_HEAD_INIT_ONSTACK and DECLARE_WAIT_QUEUE_HEAD_ONSTACK) so I
guess workqueues should do the same thing.
s/INIT_WORK_ON_STACK/INIT_WORK_ONSTACK/
s/INIT_DELAYED_WORK_ON_STACK/INIT_DELAYED_WORK_ONSTACK/
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The new init ramfs format (cpio based) requires an alignment of 4 (per the
documentation and per the source files themselves). As for compressed
sources, the decompressors can all deal with unaligned buffers.
The cpio source is also found in the __init sections of the kernel, so
once they are read and expanded into a tmpfs, the source is freed. That
means there is no need to force page alignment here either.
This has been used on Blackfin systems for many releases without issue.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With the recent change "net: remove time limit in process_backlog()", the
softnet_data variable changed from "DEFINE_PER_CPU()" to
"DEFINE_PER_CPU_ALIGNED()" which moved it from the .data section to the
.data.shared_align section. I'm not saying this patch is wrong, just that
is what caused me to notice this larger problem. No one else in the
kernel is using this aligned macro variant, so I imagine that's why no one
has noticed yet.
Since .data..shared_align isn't declared in any vmlinux files that I can
see, the linker just places it last. This "just works" for most people,
but when building a ROM kernel on Blackfin systems, it causes section
overlap errors:
bfin-uclinux-ld.real:
section .init.data [00000000202e06b8 -> 00000000202e48b7] overlaps
section .data.shared_aligned [00000000202e06b8 -> 00000000202e0723]
I imagine other arches which support the ROM config option and thus do
funky placement would see similar issues ...
On x86, it is stuck in a dedicated section at the end:
[8] .data PROGBITS ffffffff810ec000 2ec0000303a8 00 WA 0 0 4096
[9] .data.shared_alig PROGBITS ffffffff8111c3c0 31c3c00000c8 00 WA 0 0 64
So make sure we include this section in the DATA_DATA macro so that it is
placed in the right location.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Cc: Greg Ungerer <gerg@snapgear.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
gcc aligns strings as a performance consideration for those cases where
strings are being used a lot.
Their use is not performance critical, and hence it seems better to save
some space.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The whole point to using the strict functions is to check the return
value. If you don't, strict_strto*() will return you uninitialised
garbage. Offenders have been observed in the wild.
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Introduce two additional min/max macros to compare three operands. This
will save some cycles as well as some bytes on the stack and last but not
least more pleasing as macro nesting.
[akpm@linux-foundation.org: fix warnings]
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Cc: Joe Perches <joe@perches.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add vzalloc() and vzalloc_node() to encapsulate the
vmalloc-then-memset-zero operation.
Use __GFP_ZERO to zero fill the allocated memory.
Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Acked-by: Greg Ungerer <gerg@snapgear.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Introduce ___GFP_* masks in order for gfp_t to not be mixed with plain
integers which causes a lot of warnings like the following:
warning: restricted gfp_t degrades to integer
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Declare 'bdi_pending_list' and 'tag_pages_for_writeback()' to remove
following sparse warnings:
mm/backing-dev.c:46:1: warning: symbol 'bdi_pending_list' was not declared. Should it be static?
mm/page-writeback.c:825:6: warning: symbol 'tag_pages_for_writeback' was not declared. Should it be static?
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The page_check_address() conditionally grabs *@ptlp in case of returning
non-NULL. Rename and wrap it using __cond_lock() removes following
warnings from sparse:
mm/rmap.c:472:9: warning: context imbalance in 'page_mapped_in_vma' - unexpected unlock
mm/rmap.c:524:9: warning: context imbalance in 'page_referenced_one' - unexpected unlock
mm/rmap.c:706:9: warning: context imbalance in 'page_mkclean_one' - unexpected unlock
mm/rmap.c:1066:9: warning: context imbalance in 'try_to_unmap_one' - unexpected unlock
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The page_lock_anon_vma() conditionally grabs RCU and anon_vma lock but
page_unlock_anon_vma() releases them unconditionally. This leads sparse
to complain about context imbalance. Annotate them.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The get_locked_pte() conditionally grabs 'ptl' in case of returning
non-NULL. This leads sparse to complain about context imbalance. Rename
and wrap it using __cond_lock() to make sparse happy.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This change reduces mmap_sem hold times that are caused by waiting for
disk transfers when accessing file mapped VMAs.
It introduces the VM_FAULT_ALLOW_RETRY flag, which indicates that the call
site wants mmap_sem to be released if blocking on a pending disk transfer.
In that case, filemap_fault() returns the VM_FAULT_RETRY status bit and
do_page_fault() will then re-acquire mmap_sem and retry the page fault.
It is expected that the retry will hit the same page which will now be
cached, and thus it will complete with a low mmap_sem hold time.
Tests:
- microbenchmark: thread A mmaps a large file and does random read accesses
to the mmaped area - achieves about 55 iterations/s. Thread B does
mmap/munmap in a loop at a separate location - achieves 55 iterations/s
before, 15000 iterations/s after.
- We are seeing related effects in some applications in house, which show
significant performance regressions when running without this change.
[akpm@linux-foundation.org: fix warning & crash]
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reorder structure anon_vma to remove alignment padding on 64 builds when
(CONFIG_KSM || CONFIG_MIGRATION).
This will shrink the size of the anon_vma structure from 40 to 32 bytes
& allow more objects per slab in its kmem_cache.
Under slub the objects in the anon_vma kmem_cache will then be 40 bytes
with 102 objects per slab. (On v2.6.36 without this patch,the size is 48
bytes and 85 objects/slab.)
Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Keep the current interface but ignore the KM_type and use a stack based
approach.
The advantage is that we get rid of crappy code like:
#define __KM_PTE \
(in_nmi() ? KM_NMI_PTE : \
in_irq() ? KM_IRQ_PTE : \
KM_PTE0)
and in general can stop worrying about what context we're in and what kmap
slots might be appropriate for that.
The downside is that FRV kmap_atomic() gets more expensive.
For now we use a CPP trick suggested by Andrew:
#define kmap_atomic(page, args...) __kmap_atomic(page)
to avoid having to touch all kmap_atomic() users in a single patch.
[ not compiled on:
- mn10300: the arch doesn't actually build with highmem to begin with ]
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix up drivers/gpu/drm/i915/intel_overlay.c]
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Miller <davem@davemloft.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ensure kmap_atomic() usage is strictly nested
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Miller <davem@davemloft.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If congestion_wait() is called with no BDI congested, the caller will
sleep for the full timeout and this may be an unnecessary sleep. This
patch adds a wait_iff_congested() that checks congestion and only sleeps
if a BDI is congested else, it calls cond_resched() to ensure the caller
is not hogging the CPU longer than its quota but otherwise will not sleep.
This is aimed at reducing some of the major desktop stalls reported during
IO. For example, while kswapd is operating, it calls congestion_wait()
but it could just have been reclaiming clean page cache pages with no
congestion. Without this patch, it would sleep for a full timeout but
after this patch, it'll just call schedule() if it has been on the CPU too
long. Similar logic applies to direct reclaimers that are not making
enough progress.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
shrink_page_list() can decide to give up reclaiming a page under a
number of conditions such as
1. trylock_page() failure
2. page is unevictable
3. zone reclaim and page is mapped
4. PageWriteback() is true
5. page is swapbacked and swap is full
6. add_to_swap() failure
7. page is dirty and gfpmask don't have GFP_IO, GFP_FS
8. page is pinned
9. IO queue is congested
10. pageout() start IO, but not finished
With lumpy reclaim, failures result in entering synchronous lumpy reclaim
but this can be unnecessary. In cases (2), (3), (5), (6), (7) and (8),
there is no point retrying. This patch causes lumpy reclaim to abort when
it is known it will fail.
Case (9) is more interesting. current behavior is,
1. start shrink_page_list(async)
2. found queue_congested()
3. skip pageout write
4. still start shrink_page_list(sync)
5. wait on a lot of pages
6. again, found queue_congested()
7. give up pageout write again
So, it's useless time wasting. However, just skipping page reclaim is
also notgood as x86 allocating a huge page needs 512 pages for example.
It can have more dirty pages than queue congestion threshold (~=128).
After this patch, pageout() behaves as follows;
- If order > PAGE_ALLOC_COSTLY_ORDER
Ignore queue congestion always.
- If order <= PAGE_ALLOC_COSTLY_ORDER
skip write page and disable lumpy reclaim.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is strong evidence to indicate a lot of time is being spent in
congestion_wait(), some of it unnecessarily. This patch adds a tracepoint
for congestion_wait to record when congestion_wait() was called, how long
the timeout was for and how long it actually slept.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There have been numerous reports of stalls that pointed at the problem
being somewhere in the VM. There are multiple roots to the problems which
means dealing with any of the root problems in isolation is tricky to
justify on their own and they would still need integration testing. This
patch series puts together two different patch sets which in combination
should tackle some of the root causes of latency problems being reported.
Patch 1 adds a tracepoint for shrink_inactive_list. For this series, the
most important results is being able to calculate the scanning/reclaim
ratio as a measure of the amount of work being done by page reclaim.
Patch 2 accounts for time spent in congestion_wait.
Patches 3-6 were originally developed by Kosaki Motohiro but reworked for
this series. It has been noted that lumpy reclaim is far too aggressive
and trashes the system somewhat. As SLUB uses high-order allocations, a
large cost incurred by lumpy reclaim will be noticeable. It was also
reported during transparent hugepage support testing that lumpy reclaim
was trashing the system and these patches should mitigate that problem
without disabling lumpy reclaim.
Patch 7 adds wait_iff_congested() and replaces some callers of
congestion_wait(). wait_iff_congested() only sleeps if there is a BDI
that is currently congested. Patch 8 notes that any BDI being congested
is not necessarily a problem because there could be multiple BDIs of
varying speeds and numberous zones. It attempts to track when a zone
being reclaimed contains many pages backed by a congested BDI and if so,
reclaimers wait on the congestion queue.
I ran a number of tests with monitoring on X86, X86-64 and PPC64. Each
machine had 3G of RAM and the CPUs were
X86: Intel P4 2-core
X86-64: AMD Phenom 4-core
PPC64: PPC970MP
Each used a single disk and the onboard IO controller. Dirty ratio was
left at 20. I'm just going to report for X86-64 and PPC64 in a vague
attempt to keep this report short. Four kernels were tested each based on
v2.6.36-rc4
traceonly-v2r2: Patches 1 and 2 to instrument vmscan reclaims and congestion_wait
lowlumpy-v2r3: Patches 1-6 to test if lumpy reclaim is better
waitcongest-v2r3: Patches 1-7 to only wait on congestion
waitwriteback-v2r4: Patches 1-8 to detect when a zone is congested
nocongest-v1r5: Patches 1-3 for testing wait_iff_congestion
nodirect-v1r5: Patches 1-10 to disable filesystem writeback for better IO
The tests run were as follows
kernbench
compile-based benchmark. Smoke test performance
sysbench
OLTP read-only benchmark. Will be re-run in the future as read-write
micro-mapped-file-stream
This is a micro-benchmark from Johannes Weiner that accesses a
large sparse-file through mmap(). It was configured to run in only
single-CPU mode but can be indicative of how well page reclaim
identifies suitable pages.
stress-highalloc
Tries to allocate huge pages under heavy load.
kernbench, iozone and sysbench did not report any performance regression
on any machine. sysbench did pressure the system lightly and there was
reclaim activity but there were no difference of major interest between
the kernels.
X86-64 micro-mapped-file-stream
traceonly-v2r2 lowlumpy-v2r3 waitcongest-v2r3 waitwriteback-v2r4
pgalloc_dma 1639.00 ( 0.00%) 667.00 (-145.73%) 1167.00 ( -40.45%) 578.00 (-183.56%)
pgalloc_dma32 2842410.00 ( 0.00%) 2842626.00 ( 0.01%) 2843043.00 ( 0.02%) 2843014.00 ( 0.02%)
pgalloc_normal 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%)
pgsteal_dma 729.00 ( 0.00%) 85.00 (-757.65%) 609.00 ( -19.70%) 125.00 (-483.20%)
pgsteal_dma32 2338721.00 ( 0.00%) 2447354.00 ( 4.44%) 2429536.00 ( 3.74%) 2436772.00 ( 4.02%)
pgsteal_normal 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%)
pgscan_kswapd_dma 1469.00 ( 0.00%) 532.00 (-176.13%) 1078.00 ( -36.27%) 220.00 (-567.73%)
pgscan_kswapd_dma32 4597713.00 ( 0.00%) 4503597.00 ( -2.09%) 4295673.00 ( -7.03%) 3891686.00 ( -18.14%)
pgscan_kswapd_normal 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%)
pgscan_direct_dma 71.00 ( 0.00%) 134.00 ( 47.01%) 243.00 ( 70.78%) 352.00 ( 79.83%)
pgscan_direct_dma32 305820.00 ( 0.00%) 280204.00 ( -9.14%) 600518.00 ( 49.07%) 957485.00 ( 68.06%)
pgscan_direct_normal 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%)
pageoutrun 16296.00 ( 0.00%) 21254.00 ( 23.33%) 18447.00 ( 11.66%) 20067.00 ( 18.79%)
allocstall 443.00 ( 0.00%) 273.00 ( -62.27%) 513.00 ( 13.65%) 1568.00 ( 71.75%)
These are based on the raw figures taken from /proc/vmstat. It's a rough
measure of reclaim activity. Note that allocstall counts are higher
because we are entering direct reclaim more often as a result of not
sleeping in congestion. In itself, it's not necessarily a bad thing.
It's easier to get a view of what happened from the vmscan tracepoint
report.
FTrace Reclaim Statistics: vmscan
traceonly-v2r2 lowlumpy-v2r3 waitcongest-v2r3 waitwriteback-v2r4
Direct reclaims 443 273 513 1568
Direct reclaim pages scanned 305968 280402 600825 957933
Direct reclaim pages reclaimed 43503 19005 30327 117191
Direct reclaim write file async I/O 0 0 0 0
Direct reclaim write anon async I/O 0 3 4 12
Direct reclaim write file sync I/O 0 0 0 0
Direct reclaim write anon sync I/O 0 0 0 0
Wake kswapd requests 187649 132338 191695 267701
Kswapd wakeups 3 1 4 1
Kswapd pages scanned 4599269 4454162 4296815 3891906
Kswapd pages reclaimed 2295947 2428434 2399818 2319706
Kswapd reclaim write file async I/O 1 0 1 1
Kswapd reclaim write anon async I/O 59 187 41 222
Kswapd reclaim write file sync I/O 0 0 0 0
Kswapd reclaim write anon sync I/O 0 0 0 0
Time stalled direct reclaim (seconds) 4.34 2.52 6.63 2.96
Time kswapd awake (seconds) 11.15 10.25 11.01 10.19
Total pages scanned 4905237 4734564 4897640 4849839
Total pages reclaimed 2339450 2447439 2430145 2436897
%age total pages scanned/reclaimed 47.69% 51.69% 49.62% 50.25%
%age total pages scanned/written 0.00% 0.00% 0.00% 0.00%
%age file pages scanned/written 0.00% 0.00% 0.00% 0.00%
Percentage Time Spent Direct Reclaim 29.23% 19.02% 38.48% 20.25%
Percentage Time kswapd Awake 78.58% 78.85% 76.83% 79.86%
What is interesting here for nocongest in particular is that while direct
reclaim scans more pages, the overall number of pages scanned remains the
same and the ratio of pages scanned to pages reclaimed is more or less the
same. In other words, while we are sleeping less, reclaim is not doing
more work and as direct reclaim and kswapd is awake for less time, it
would appear to be doing less work.
FTrace Reclaim Statistics: congestion_wait
Direct number congest waited 87 196 64 0
Direct time congest waited 4604ms 4732ms 5420ms 0ms
Direct full congest waited 72 145 53 0
Direct number conditional waited 0 0 324 1315
Direct time conditional waited 0ms 0ms 0ms 0ms
Direct full conditional waited 0 0 0 0
KSwapd number congest waited 20 10 15 7
KSwapd time congest waited 1264ms 536ms 884ms 284ms
KSwapd full congest waited 10 4 6 2
KSwapd number conditional waited 0 0 0 0
KSwapd time conditional waited 0ms 0ms 0ms 0ms
KSwapd full conditional waited 0 0 0 0
The vanilla kernel spent 8 seconds asleep in direct reclaim and no time at
all asleep with the patches.
MMTests Statistics: duration
User/Sys Time Running Test (seconds) 10.51 10.73 10.6 11.66
Total Elapsed Time (seconds) 14.19 13.00 14.33 12.76
Overall, the tests completed faster. It is interesting to note that backing off further
when a zone is congested and not just a BDI was more efficient overall.
PPC64 micro-mapped-file-stream
pgalloc_dma 3024660.00 ( 0.00%) 3027185.00 ( 0.08%) 3025845.00 ( 0.04%) 3026281.00 ( 0.05%)
pgalloc_normal 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%)
pgsteal_dma 2508073.00 ( 0.00%) 2565351.00 ( 2.23%) 2463577.00 ( -1.81%) 2532263.00 ( 0.96%)
pgsteal_normal 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%)
pgscan_kswapd_dma 4601307.00 ( 0.00%) 4128076.00 ( -11.46%) 3912317.00 ( -17.61%) 3377165.00 ( -36.25%)
pgscan_kswapd_normal 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%)
pgscan_direct_dma 629825.00 ( 0.00%) 971622.00 ( 35.18%) 1063938.00 ( 40.80%) 1711935.00 ( 63.21%)
pgscan_direct_normal 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%)
pageoutrun 27776.00 ( 0.00%) 20458.00 ( -35.77%) 18763.00 ( -48.04%) 18157.00 ( -52.98%)
allocstall 977.00 ( 0.00%) 2751.00 ( 64.49%) 2098.00 ( 53.43%) 5136.00 ( 80.98%)
Similar trends to x86-64. allocstalls are up but it's not necessarily bad.
FTrace Reclaim Statistics: vmscan
Direct reclaims 977 2709 2098 5136
Direct reclaim pages scanned 629825 963814 1063938 1711935
Direct reclaim pages reclaimed 75550 242538 150904 387647
Direct reclaim write file async I/O 0 0 0 2
Direct reclaim write anon async I/O 0 10 0 4
Direct reclaim write file sync I/O 0 0 0 0
Direct reclaim write anon sync I/O 0 0 0 0
Wake kswapd requests 392119 1201712 571935 571921
Kswapd wakeups 3 2 3 3
Kswapd pages scanned 4601307 4128076 3912317 3377165
Kswapd pages reclaimed 2432523 2318797 2312673 2144616
Kswapd reclaim write file async I/O 20 1 1 1
Kswapd reclaim write anon async I/O 57 132 11 121
Kswapd reclaim write file sync I/O 0 0 0 0
Kswapd reclaim write anon sync I/O 0 0 0 0
Time stalled direct reclaim (seconds) 6.19 7.30 13.04 10.88
Time kswapd awake (seconds) 21.73 26.51 25.55 23.90
Total pages scanned 5231132 5091890 4976255 5089100
Total pages reclaimed 2508073 2561335 2463577 2532263
%age total pages scanned/reclaimed 47.95% 50.30% 49.51% 49.76%
%age total pages scanned/written 0.00% 0.00% 0.00% 0.00%
%age file pages scanned/written 0.00% 0.00% 0.00% 0.00%
Percentage Time Spent Direct Reclaim 18.89% 20.65% 32.65% 27.65%
Percentage Time kswapd Awake 72.39% 80.68% 78.21% 77.40%
Again, a similar trend that the congestion_wait changes mean that direct
reclaim scans more pages but the overall number of pages scanned while
slightly reduced, are very similar. The ratio of scanning/reclaimed
remains roughly similar. The downside is that kswapd and direct reclaim
was awake longer and for a larger percentage of the overall workload.
It's possible there were big differences in the amount of time spent
reclaiming slab pages between the different kernels which is plausible
considering that the micro tests runs after fsmark and sysbench.
Trace Reclaim Statistics: congestion_wait
Direct number congest waited 845 1312 104 0
Direct time congest waited 19416ms 26560ms 7544ms 0ms
Direct full congest waited 745 1105 72 0
Direct number conditional waited 0 0 1322 2935
Direct time conditional waited 0ms 0ms 12ms 312ms
Direct full conditional waited 0 0 0 3
KSwapd number congest waited 39 102 75 63
KSwapd time congest waited 2484ms 6760ms 5756ms 3716ms
KSwapd full congest waited 20 48 46 25
KSwapd number conditional waited 0 0 0 0
KSwapd time conditional waited 0ms 0ms 0ms 0ms
KSwapd full conditional waited 0 0 0 0
The vanilla kernel spent 20 seconds asleep in direct reclaim and only
312ms asleep with the patches. The time kswapd spent congest waited was
also reduced by a large factor.
MMTests Statistics: duration
ser/Sys Time Running Test (seconds) 26.58 28.05 26.9 28.47
Total Elapsed Time (seconds) 30.02 32.86 32.67 30.88
With all patches applies, the completion times are very similar.
X86-64 STRESS-HIGHALLOC
traceonly-v2r2 lowlumpy-v2r3 waitcongest-v2r3waitwriteback-v2r4
Pass 1 82.00 ( 0.00%) 84.00 ( 2.00%) 85.00 ( 3.00%) 85.00 ( 3.00%)
Pass 2 90.00 ( 0.00%) 87.00 (-3.00%) 88.00 (-2.00%) 89.00 (-1.00%)
At Rest 92.00 ( 0.00%) 90.00 (-2.00%) 90.00 (-2.00%) 91.00 (-1.00%)
Success figures across the board are broadly similar.
traceonly-v2r2 lowlumpy-v2r3 waitcongest-v2r3waitwriteback-v2r4
Direct reclaims 1045 944 886 887
Direct reclaim pages scanned 135091 119604 109382 101019
Direct reclaim pages reclaimed 88599 47535 47863 46671
Direct reclaim write file async I/O 494 283 465 280
Direct reclaim write anon async I/O 29357 13710 16656 13462
Direct reclaim write file sync I/O 154 2 2 3
Direct reclaim write anon sync I/O 14594 571 509 561
Wake kswapd requests 7491 933 872 892
Kswapd wakeups 814 778 731 780
Kswapd pages scanned 7290822 15341158 11916436 13703442
Kswapd pages reclaimed 3587336 3142496 3094392 3187151
Kswapd reclaim write file async I/O 91975 32317 28022 29628
Kswapd reclaim write anon async I/O 1992022 789307 829745 849769
Kswapd reclaim write file sync I/O 0 0 0 0
Kswapd reclaim write anon sync I/O 0 0 0 0
Time stalled direct reclaim (seconds) 4588.93 2467.16 2495.41 2547.07
Time kswapd awake (seconds) 2497.66 1020.16 1098.06 1176.82
Total pages scanned 7425913 15460762 12025818 13804461
Total pages reclaimed 3675935 3190031 3142255 3233822
%age total pages scanned/reclaimed 49.50% 20.63% 26.13% 23.43%
%age total pages scanned/written 28.66% 5.41% 7.28% 6.47%
%age file pages scanned/written 1.25% 0.21% 0.24% 0.22%
Percentage Time Spent Direct Reclaim 57.33% 42.15% 42.41% 42.99%
Percentage Time kswapd Awake 43.56% 27.87% 29.76% 31.25%
Scanned/reclaimed ratios again look good with big improvements in
efficiency. The Scanned/written ratios also look much improved. With a
better scanned/written ration, there is an expectation that IO would be
more efficient and indeed, the time spent in direct reclaim is much
reduced by the full series and kswapd spends a little less time awake.
Overall, indications here are that allocations were happening much faster
and this can be seen with a graph of the latency figures as the
allocations were taking place
http://www.csn.ul.ie/~mel/postings/vmscanreduce-20101509/highalloc-interlatency-hydra-mean.ps
FTrace Reclaim Statistics: congestion_wait
Direct number congest waited 1333 204 169 4
Direct time congest waited 78896ms 8288ms 7260ms 200ms
Direct full congest waited 756 92 69 2
Direct number conditional waited 0 0 26 186
Direct time conditional waited 0ms 0ms 0ms 2504ms
Direct full conditional waited 0 0 0 25
KSwapd number congest waited 4 395 227 282
KSwapd time congest waited 384ms 25136ms 10508ms 18380ms
KSwapd full congest waited 3 232 98 176
KSwapd number conditional waited 0 0 0 0
KSwapd time conditional waited 0ms 0ms 0ms 0ms
KSwapd full conditional waited 0 0 0 0
KSwapd full conditional waited 318 0 312 9
Overall, the time spent speeping is reduced. kswapd is still hitting
congestion_wait() but that is because there are callers remaining where it
wasn't clear in advance if they should be changed to wait_iff_congested()
or not. Overall the sleep imes are reduced though - from 79ish seconds to
about 19.
MMTests Statistics: duration
User/Sys Time Running Test (seconds) 3415.43 3386.65 3388.39 3377.5
Total Elapsed Time (seconds) 5733.48 3660.33 3689.41 3765.39
With the full series, the time to complete the tests are reduced by 30%
PPC64 STRESS-HIGHALLOC
traceonly-v2r2 lowlumpy-v2r3 waitcongest-v2r3waitwriteback-v2r4
Pass 1 17.00 ( 0.00%) 34.00 (17.00%) 38.00 (21.00%) 43.00 (26.00%)
Pass 2 25.00 ( 0.00%) 37.00 (12.00%) 42.00 (17.00%) 46.00 (21.00%)
At Rest 49.00 ( 0.00%) 43.00 (-6.00%) 45.00 (-4.00%) 51.00 ( 2.00%)
Success rates there are *way* up particularly considering that the 16MB
huge pages on PPC64 mean that it's always much harder to allocate them.
FTrace Reclaim Statistics: vmscan
stress-highalloc stress-highalloc stress-highalloc stress-highalloc
traceonly-v2r2 lowlumpy-v2r3 waitcongest-v2r3waitwriteback-v2r4
Direct reclaims 499 505 564 509
Direct reclaim pages scanned 223478 41898 51818 45605
Direct reclaim pages reclaimed 137730 21148 27161 23455
Direct reclaim write file async I/O 399 136 162 136
Direct reclaim write anon async I/O 46977 2865 4686 3998
Direct reclaim write file sync I/O 29 0 1 3
Direct reclaim write anon sync I/O 31023 159 237 239
Wake kswapd requests 420 351 360 326
Kswapd wakeups 185 294 249 277
Kswapd pages scanned 15703488 16392500 17821724 17598737
Kswapd pages reclaimed 5808466 2908858 3139386 3145435
Kswapd reclaim write file async I/O 159938 18400 18717 13473
Kswapd reclaim write anon async I/O 3467554 228957 322799 234278
Kswapd reclaim write file sync I/O 0 0 0 0
Kswapd reclaim write anon sync I/O 0 0 0 0
Time stalled direct reclaim (seconds) 9665.35 1707.81 2374.32 1871.23
Time kswapd awake (seconds) 9401.21 1367.86 1951.75 1328.88
Total pages scanned 15926966 16434398 17873542 17644342
Total pages reclaimed 5946196 2930006 3166547 3168890
%age total pages scanned/reclaimed 37.33% 17.83% 17.72% 17.96%
%age total pages scanned/written 23.27% 1.52% 1.94% 1.43%
%age file pages scanned/written 1.01% 0.11% 0.11% 0.08%
Percentage Time Spent Direct Reclaim 44.55% 35.10% 41.42% 36.91%
Percentage Time kswapd Awake 86.71% 43.58% 52.67% 41.14%
While the scanning rates are slightly up, the scanned/reclaimed and
scanned/written figures are much improved. The time spent in direct
reclaim and with kswapd are massively reduced, mostly by the lowlumpy
patches.
FTrace Reclaim Statistics: congestion_wait
Direct number congest waited 725 303 126 3
Direct time congest waited 45524ms 9180ms 5936ms 300ms
Direct full congest waited 487 190 52 3
Direct number conditional waited 0 0 200 301
Direct time conditional waited 0ms 0ms 0ms 1904ms
Direct full conditional waited 0 0 0 19
KSwapd number congest waited 0 2 23 4
KSwapd time congest waited 0ms 200ms 420ms 404ms
KSwapd full congest waited 0 2 2 4
KSwapd number conditional waited 0 0 0 0
KSwapd time conditional waited 0ms 0ms 0ms 0ms
KSwapd full conditional waited 0 0 0 0
Not as dramatic a story here but the time spent asleep is reduced and we
can still see what wait_iff_congested is going to sleep when necessary.
MMTests Statistics: duration
User/Sys Time Running Test (seconds) 12028.09 3157.17 3357.79 3199.16
Total Elapsed Time (seconds) 10842.07 3138.72 3705.54 3229.85
The time to complete this test goes way down. With the full series, we
are allocating over twice the number of huge pages in 30% of the time and
there is a corresponding impact on the allocation latency graph available
at.
http://www.csn.ul.ie/~mel/postings/vmscanreduce-20101509/highalloc-interlatency-powyah-mean.ps
This patch:
Add a trace event for shrink_inactive_list() and updates the sample
postprocessing script appropriately. It can be used to determine how many
pages were reclaimed and for non-lumpy reclaim where exactly the pages
were reclaimed from.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
NODE_NOT_IN_PAGE_FLAGS is defined in mm.h when the node information is not
stored in the page flags bitmap.
Unfortunately, there's a typo in one of the checks for it. This patch
fixes it (s/NODE_NOT_IN_PAGEFLAGS/NODE_NOT_IN_PAGE_FLAGS/). Since this
has been around for ages, I doubt it's been causing any serious problems.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To help developers and applications gain visibility into writeback
behaviour adding two entries to vm_stat_items and /proc/vmstat. This will
allow us to track the "written" and "dirtied" counts.
# grep nr_dirtied /proc/vmstat
nr_dirtied 3747
# grep nr_written /proc/vmstat
nr_written 3618
Signed-off-by: Michael Rubin <mrubin@google.com>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To help developers and applications gain visibility into writeback
behaviour this patch adds two counters to /proc/vmstat.
# grep nr_dirtied /proc/vmstat
nr_dirtied 3747
# grep nr_written /proc/vmstat
nr_written 3618
These entries allow user apps to understand writeback behaviour over time
and learn how it is impacting their performance. Currently there is no
way to inspect dirty and writeback speed over time. It's not possible for
nr_dirty/nr_writeback.
These entries are necessary to give visibility into writeback behaviour.
We have /proc/diskstats which lets us understand the io in the block
layer. We have blktrace for more in depth understanding. We have
e2fsprogs and debugsfs to give insight into the file systems behaviour,
but we don't offer our users the ability understand what writeback is
doing. There is no way to know how active it is over the whole system, if
it's falling behind or to quantify it's efforts. With these values
exported users can easily see how much data applications are sending
through writeback and also at what rates writeback is processing this
data. Comparing the rates of change between the two allow developers to
see when writeback is not able to keep up with incoming traffic and the
rate of dirty memory being sent to the IO back end. This allows folks to
understand their io workloads and track kernel issues. Non kernel
engineers at Google often use these counters to solve puzzling performance
problems.
Patch #4 adds a pernode vmstat file with nr_dirtied and nr_written
Patch #5 add writeback thresholds to /proc/vmstat
Currently these values are in debugfs. But they should be promoted to
/proc since they are useful for developers who are writing databases
and file servers and are not debugging the kernel.
The output is as below:
# grep threshold /proc/vmstat
nr_pages_dirty_threshold 409111
nr_pages_dirty_background_threshold 818223
This patch:
This allows code outside of the mm core to safely manipulate page
writeback state and not worry about the other accounting. Not using these
routines means that some code will lose track of the accounting and we get
bugs.
Modify nilfs2 to use interface.
Signed-off-by: Michael Rubin <mrubin@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Cc: Jiro SEKIBA <jir@unicus.jp>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now, sysfs interface of memory hotplug shows whether the section is
removable or not. But it checks only migrateype of pages and doesn't
check details of cluster of pages.
Next, memory hotplug's set_migratetype_isolate() has the same kind of
check, too.
This patch adds the function __count_unmovable_pages() and makes above 2
checks to use the same logic. Then, is_removable and hotremove code uses
the same logic. No changes in the hotremove logic itself.
TODO: need to find a way to check RECLAMABLE. But, considering bit,
calling shrink_slab() against a range before starting memory hotremove
sounds better. If so, this patch's logic doesn't need to be changed.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reported-by: Michal Hocko <mhocko@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Non-NUMA systems do never create these files anyway, since they are only
created by driver subsystem when NUMA is configured.
[akpm@linux-foundation.org: cleanup]
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This removes more dead code that was somehow missed by commit 0d99519efe
(writeback: remove unused nonblocking and congestion checks). There are
no behavior change except for the removal of two entries from one of the
ext4 tracing interface.
The nonblocking checks in ->writepages are no longer used because the
flusher now prefer to block on get_request_wait() than to skip inodes on
IO congestion. The latter will lead to more seeky IO.
The nonblocking checks in ->writepage are no longer used because it's
redundant with the WB_SYNC_NONE check.
We no long set ->nonblocking in VM page out and page migration, because
a) it's effectively redundant with WB_SYNC_NONE in current code
b) it's old semantic of "Don't get stuck on request queues" is mis-behavior:
that would skip some dirty inodes on congestion and page out others, which
is unfair in terms of LRU age.
Inspired by Christoph Hellwig. Thanks!
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: David Howells <dhowells@redhat.com>
Cc: Sage Weil <sage@newdream.net>
Cc: Steve French <sfrench@samba.org>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's pointless to kill a task if another thread sharing its mm cannot be
killed to allow future memory freeing. A subsequent patch will prevent
kills in such cases, but first it's necessary to have a way to flag a task
that shares memory with an OOM_DISABLE task that doesn't incur an
additional tasklist scan, which would make select_bad_process() an O(n^2)
function.
This patch adds an atomic counter to struct mm_struct that follows how
many threads attached to it have an oom_score_adj of OOM_SCORE_ADJ_MIN.
They cannot be killed by the kernel, so their memory cannot be freed in
oom conditions.
This only requires task_lock() on the task that we're operating on, it
does not require mm->mmap_sem since task_lock() pins the mm and the
operation is atomic.
[rientjes@google.com: changelog and sys_unshare() code]
[rientjes@google.com: protect oom_disable_count with task_lock in fork]
[rientjes@google.com: use old_mm for oom_disable_count in exec]
Signed-off-by: Ying Han <yinghan@google.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This helper is wrong: it coerces signed values into unsigned ones, so code
such as
if (kfifo_alloc(...) < 0) {
error
}
will fail to detect the error.
So let's disable __kfifo_must_check_helper() for 2.6.36.
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This comment landed in the wrong place.
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Paris <eparis@redhat.com>
Cc: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ima-memory-use-fixes:
IMA: fix the ToMToU logic
IMA: explicit IMA i_flag to remove global lock on inode_delete
IMA: drop refcnt from ima_iint_cache since it isn't needed
IMA: only allocate iint when needed
IMA: move read counter into struct inode
IMA: use i_writecount rather than a private counter
IMA: use inode->i_lock to protect read and write counters
IMA: convert internal flags from long to char
IMA: use unsigned int instead of long for counters
IMA: drop the inode opencount since it isn't needed for operation
IMA: use rbtree instead of radix tree for inode information cache
